BSIS/BSAS tables not populated

Dear Experts,
I have a GL/account having too many items but FAGLL03 returns no items.
I have found that the reason is that tables BSIS and BSAS are not being populated with line items. however tables BKPF and BSEG in addition to FAGLFLEXA are all populated.
can you please assist why BSIS/BSAS are not populated thus FAGLL03 is not working? what is wrong with this GL account?
Thanks for your assistance.
Samir

Hmmm... Is it normal FI document or it's posted through some interface? If it's normal document and the following is right:
a) G/L account of the document is defined with 'line item' flag in this company code (SKB1 table)
b) the document exists in BSEG
c) BSEG-XKRES flag is 'X' on the line for this account
Then, if all mentioned above is correct, I'd open OSS note.
Regards,
Eli

Similar Messages

Clearing details i could not getting at BSIS & BSAS table. after Payment

Hi All,
I posted one invoice document through MIRO like below
Itm PK BusA Acct no.   Description                    Tx         Amount in   INR
001 31 1000 102961     DRUCK INDIA PVT. LTD. SC            479,777.20-
002 86 1000 350101     GR-IR-Account                 SC            427,000.00
003 40          300816     Service Tax 1 Cess           SC             51,240.00
004 40          300817     CESS 1                           SC              1,024.80
005 40          300817     CESS 1                           SC                512.40
payment to vendor also done through F110.
Itm PK BusA Acct no.   Description                    T x     Amount in   INR
001 25 1000 102961     DRUCK INDIA PVT. LTD.                        479,777.20
002 50           140904     ABN Amro Payments                             479,777.20-
now problem is Clearing details i could not getting at BSIS & BSAS table.
but iam getting clearing details at BSEG table. what is the problem . plse give help & solution. it is very urgant.if u have any doubts plse ask me.
Advance Thanks
Raj

Dear sridhar/ all
vendor side is all tables updated. it is ok. but i want detals about BSAS & BSIS.
because iam working on service tax creidit configuration. in BSEG table it is showing cleared. but in BSAS & BSIS tables not showing as a cleared item. what is the reason . plse give solution/ help.
Raj

Inconsitency in BSIS & BSAS Tables

Due to the messup done by the consultants engaged by our organisation for SAP implementation with respect to SEM & BCS consolidation over and above the other goofups they made, we had to update certain fields ( Trading Partner & Recon Account - meant for related parties) directly in the tables.
After such updation we encountered line itme reports not matching the Totals. We reset back the reconcilation accounts to the Orginal value. All tables except the BSIS & BSAS are ok, due to certain duplicate reocrds in BSIS and BSAS tables vis a vis BSID, BSAD, BSIK & BSAK, can anyone advice and /or guide us as to the repurcussions if we delete these duplicate rows in BSIS and BSAS with respect to report generation, future transactions, closing etc.
Message was edited by:
Brad Master

It is baffling how SEM and BCS consultants ended up messing up your R/3 tables. That is one of the reason why there is always a separate ownership of the two process areas. Best practice is to have separate owners for FI and BCS areas. Never the twain shall meet!
Regardless of who is to blame for the messup, it is NEVER a good idea for you to update the SAP tables directly. Period. No exceptions.
The fact that someone (inhouse or same consultants?) actually suggested you do that and you did that is symptomatic of deeper problems in your organization.
My two cents: don't paper over the already exacerbated problem. Get rid of cheap consultants and get some knowledgeable help.

ESS Bsns pkg Bnfts &Pymnt - Overview Drop down and table not populated

Hi All,
We have configured ESS business package. Payslips in form of PDF are available in Benefits and payment.
Overview dropdown and table are not getting populated.
I checked context node rem, vcdata and attribute overview_sel in VcRem2Selection comp.
They are not populated at any place as well. How does this work?
Please guide
Regards,
Ganga

Hi Gangadharayya,
There are 2 ways of populating the dropdown.
Either u can create a simple type and bind the attribute to the SimpleType, or use the class ISimpleTypeModifiable and IModifiableValueSet to populate the values at run-time.
Hope this helps u
Regards,
Poojith M V

Table not populating values

Hello All,
I am populating Table for a Search Region and the values are not getting populated. I am altering the where clause in PFR of the CO. Please find the code in PFR.
String eNum = pageContext.getParameter("SearchEmpNum");
System.out.println("Employee Number " + eNum);
System.out.println("Post initQuery ");
OAViewObject vo = (OAViewObject)am.findViewObject("ZenPerSearchVO1");
if (vo != null) {
vo.clearCache();
vo.setWhereClause(null);
vo.setWhereClause("PERSON_ID in (select selected_person_id from hr_working_person_lists where owning_person_id = zen_person_details.get_person_id(:1))");
vo.setWhereClauseParams(null);
vo.setWhereClauseParam(0, eNum);
System.out.println("Params " + eNum);
//System.out.println("Post Clause " + vo.getQuery());
vo.executeQuery();
System.out.println("Post whereclause ");
The following is the Page
<?xml version = '1.0' encoding = 'UTF-8'?>
<page xmlns:jrad="http://xmlns.oracle.com/jrad" xmlns:oa="http://xmlns.oracle.com/oa" xmlns:ui="http://xmlns.oracle.com/uix/ui" version="10.1.3_1312" xml:lang="en-US" xmlns:user="http://xmlns.oracle.com/jrad/user" xmlns="http://xmlns.oracle.com/jrad" file-version="$Header$">
<content>
<oa:pageLayout id="PageLayoutRN" amDefName="zenith.oracle.apps.hxc.asg.server.ZenPerSearchAM" windowTitle="Employee Search Window" title="Employees">
<ui:corporateBranding>
<oa:image id="corporateBrandingImage" source="/OA_MEDIA/FNDSSCORP.gif"/>
</ui:corporateBranding>
<ui:contents>
<oa:query id="QueryRN" dispSimple="true" dispCustomized="false" dispAdvanced="false" mode="autoCustomizationCriteria" amDefName="zenith.oracle.apps.hxc.asg.server.ZenPerSearchAM" controllerClass="zenith.oracle.apps.hxc.asg.webui.ZenPersonSearchCO">
<ui:contents>
<oa:table id="ResultsTable" userCustomizable="true" shortDesc="Employees Assigned Table" amDefName="zenith.oracle.apps.hxc.asg.server.ZenPerSearchAM">
<ui:contents>
<oa:messageStyledText id="EmpNum" viewName="ZenPerSearchVO1" viewAttr="EmployeeNumber" queryable="true" sortState="ascending" prompt="Employee Number" selectiveSearchCriteria="true" initSortSeq="first" userCustomizable="true"/>
<oa:messageStyledText id="EmpName" queryable="true" sortState="no" viewName="ZenPerSearchVO1" viewAttr="FullName" prompt="Employee" unvalidated="true" selectiveSearchCriteria="true" userCustomizable="true"/>
</ui:contents>
</oa:table>
</ui:contents>
<oa:simpleSearchPanel>
<oa:header text="Employee Search" id="SimpleSearchHdr">
<ui:contents>
<oa:messageComponentLayout id="CustomSimpleSearch">
<ui:contents>
<oa:messageLovInput id="SearchEmpName" selectiveSearchCriteria="true" prompt="Employee Name" unvalidated="true" externalListOfValues="/zenith/oracle/apps/hxc/asg/lov/webui/ZenEmpLovRN" required="yes">
<lovMappings>
<lovMap id="EnameMap" lovItem="EmpName" resultTo="SearchEmpName" criteriaFrom="SearchEmpName"/>
<lovMap id="ENumMap" lovItem="EmpNum" resultTo="SearchEmpNum" criteriaFrom="SearchEmpNum"/>
</lovMappings>
</oa:messageLovInput>
<oa:messageTextInput id="SearchEmpNum" selectiveSearchCriteria="true" prompt="Employee Number"/>
</ui:contents>
</oa:messageComponentLayout>
</ui:contents>
</oa:header>
</oa:simpleSearchPanel>
<oa:simpleSearchMappings>
<oa:queryCriteriaMap id="EmpNameMap" criteriaItem="SearchEmpName" resultsItem="EmpName"/>
<oa:queryCriteriaMap id="EmpNumMap" criteriaItem="SearchEmpNum" resultsItem="EmpNum"/>
</oa:simpleSearchMappings>
</oa:query>
<oa:defaultSingleColumn id="ApplyRN">
<ui:contents>
<oa:submitButton id="SButton" text="Save" prompt="Save">
<ui:primaryClientAction>
<ui:fireAction/>
</ui:primaryClientAction>
</oa:submitButton>
</ui:contents>
</oa:defaultSingleColumn>
</ui:contents>
</oa:pageLayout>
</content>
</page>

Hi,
Some of the column values are not getting populated or few rows which you are expecting is not getting populated?
Could you please try the following 2 changes, in both the cases, after executing the query, print all the query and rows in the VO using the below code (change your object names accordingly).
if(appraisalVO !=null)
AppraisalVORowImpl appraisalVORow = (AppraisalVORowImpl) appraisalVO.first();
if(appraisalVORow !=null)
int attrCount = appraisalVO.getAttributeCount();
writeLog("XXRBG",pageContext,"Attrbuute count "+attrCount);
String[] attributeNames = appraisalVORow.getAttributeNames();
for (int i = 0 ;i< attributeNames.length ;i++ )
writeLog("XXRBG",pageContext," Name "+attributeNames[i] +" = "+appraisalVORow.getAttribute(i));
1)
instead of calling the function to get the owning_person_id, hard code the value and check you are getting the expected result.
like,
vo.setWhereClause("PERSON_ID in (select selected_person_id from hr_working_person_lists where owning_person_id = 54)");
2)
instead of the below code
vo.setWhereClause("PERSON_ID in (select selected_person_id from hr_working_person_lists where owning_person_id = zen_person_details.get_person_id(:1))");
vo.setWhereClauseParams(null);
vo.setWhereClauseParam(0, eNum);
System.out.println("Params " + eNum);
try without binding the parameter like,
vo.setWhereClause("PERSON_ID in (select selected_person_id from hr_working_person_lists where owning_person_id = zen_person_details.get_person_id("+eNum+"))");
Thanks.
With Regards,
Kali.
OSSi.

ARP table not populating mac address for previously reachable IP address

Router has been online and working fine with one BGP neighbor for almost 2 years and no downtime. 2 weeks ago, added a 2nd BGP peer. Everything worked fine for 2 weeks, then all of a sudden yesterday the 2nd BGP peer is disconnected and does not come back. ISP checks and sees everything looks fine on their end. We cannot even ping each other now.
Upon investigation, the ARP table is not even populating the MAC address for the BGP peer IP anymore (same local subnet). Stays "incomplete" in the table no matter what we do, including clearing arp table, changing IP address, etc.
Plug a laptop directly into the 2nd BGP peer FE port and replicate the IP addressing. Laptop cannot ping Router, but Router CAN ping laptop. Check ARP table, but STILL no mac address assigned and now not even the ARP table showing "incomplete".
Thinking it could be the FE interface, switch to the 2nd FE interface and perform same laptop test, this time with arbitrary IP addressing. Now cannot ping each other, no MAC in ARP table.
End up rebooting the router and lo-and-behold, everything is working normally again. 2nd BGP peer peers up instantly.
I should also mention that the 1st BGP peer worked flawlessly throughout, taking all the Internet load and having no issues throughout.
Also, the FE ports for the 2nd BGP peer are on an HWIC FE card plugged into the router. The 1st BGP peer is plugged into the built-in GE interface. 2901 running: c2900-universalk9-mz.SPA.151-4.M4.bin
Lastly, no router resource issues, no error messages, no logs. Just the BGP peer disconnecting.
I have never, in 20 years working with Cisco routers seen something like this before. This is the most fundamental aspect of IP and Ethernet that was not working.
Has anyone ever seen this behavior before??
Here is the router config (IP's changed):
version 15.1
service timestamps debug datetime msec localtime show-timezone
service timestamps log datetime msec localtime show-timezone
service password-encryption
service internal
service sequence-numbers
boot-start-marker
boot-end-marker
logging buffered 150000
aaa new-model
aaa authentication login LAUTHEN local
aaa authentication login TAUTHEN local group tacacs+ enable
aaa authorization console
aaa authorization exec LAUTHOR local if-authenticated
aaa authorization exec TAUTHOR local group tacacs+ if-authenticated
aaa session-id common
clock timezone PST -8 0
clock summer-time PDT recurring
no ipv6 cef
no ip source-route
ip cef
no ip domain lookup
multilink bundle-name authenticated
username ubiadmin privilege 15 secret 4 .JbeuWXuZvchrG0OL.5BftFtqrrEyxcnVHn5rIuCnTk
username umitsnoc01 privilege 15 secret 4 cUmoRUjey9O1x.wk9S.kleX.iAAhCwihupr6Z98p6OA
redundancy
ip ssh version 2
track 1 interface GigabitEthernet0/0 line-protocol
class-map match-any AutoQoS-VoIP-RTP-Trust
match access-group name SIP-Media-INBOUND
class-map match-any AutoQoS-VoIP-Control-Trust
match ip dscp cs3
match ip dscp af31
class-map match-any Customer-Voice
match access-group name Customer-VPNs
class-map match-any media
match access-group name SIP-Media
class-map match-any signaling
match access-group name SIP-Signaling
policy-map AutoQoS-Policy-Trust
class AutoQoS-VoIP-RTP-Trust
priority percent 70
class AutoQoS-VoIP-Control-Trust
bandwidth percent 5
class class-default
fair-queue
policy-map queue
class signaling
bandwidth percent 5
class media
priority percent 50
class Customer-Voice
priority percent 40
class class-default
fair-queue
policy-map shape
class class-default
shape average 10000000
service-policy queue
interface Embedded-Service-Engine0/0
no ip address
shutdown
interface GigabitEthernet0/0
description BGP Peer 1
ip address 2.2.2.2 255.255.255.252
no ip redirects
ip flow ingress
ip flow egress
duplex auto
speed auto
service-policy output shape
interface GigabitEthernet0/1
description LAN
ip address 1.2.3.4 255.255.255.0
no ip redirects
ip flow ingress
ip flow egress
standby 255 ip 1.2.3.1
standby 255 priority 105
standby 255 preempt
standby 255 mac-address 1a2b.3c4d.5e6f
standby 255 track 1 decrement 10
duplex auto
speed auto
service-policy output AutoQoS-Policy-Trust
interface FastEthernet0/0/0
description BGP Peer 2
ip address 1.1.1.1 255.255.255.252
ip flow ingress
ip flow egress
duplex full
speed 100
service-policy output shape
interface FastEthernet0/0/1
no ip address
shutdown
duplex auto
speed auto
router bgp 7777
bgp router-id 2.2.2.2
bgp log-neighbor-changes
network 1.2.3.0 mask 255.255.255.0
neighbor 1.1.1.2 remote-as 5555
neighbor 1.1.1.2 update-source FastEthernet0/0/0
neighbor 1.1.1.2 prefix-list L3-DEFGW in
neighbor 1.1.1.2 route-map L3-LPREF-IN in
neighbor 2.2.2.1 remote-as 6666
neighbor 2.2.2.1 ebgp-multihop 2
neighbor 2.2.2.1 update-source GigabitEthernet0/0
neighbor 2.2.2.1 send-community
neighbor 2.2.2.1 prefix-list COLO-DEFGW in
neighbor 2.2.2.1 route-map COLO-LPREF-IN in
neighbor 2.2.2.1 route-map COLO-OUT out
ip forward-protocol nd
ip bgp-community new-format
ip as-path access-list 5 permit _5555_
ip as-path access-list 5 deny .*
ip as-path access-list 10 permit ^6666$
no ip http server
no ip http secure-server
ip flow-top-talkers
top 50
sort-by bytes
ip route 0.0.0.0 0.0.0.0 1.1.1.2 254 name L3
ip route 0.0.0.0 0.0.0.0 2.2.2.1 255 name COLO1
ip route 10.0.0.0 255.0.0.0 10.10.10.10 name FW_OUTSIDE
ip tacacs source-interface GigabitEthernet0/1
ip access-list standard SNMP_SOURCES
permit 12.12.12.0 0.0.0.255
deny any log
ip prefix-list L3-DEFGW seq 5 permit 0.0.0.0/0
ip prefix-list COLO-DEFGW seq 5 permit 0.0.0.0/0
ip prefix-list COLO-LPREF-OUT seq 5 permit 1.2.3.0/24
route-map COLO-LPREF-IN permit 5
match as-path 5
set local-preference 250
route-map COLO-LPREF-IN permit 10
set local-preference 150
route-map COLO-LPREF-IN permit 20
route-map COLO-OUT permit 10
match ip address prefix-list COLO-LPREF-OUT
set as-path prepend 7777 7777 7777
set community 29795:1004
route-map COLO-OUT permit 20
route-map L3-LPREF-IN permit 10
match as-path 10
set local-preference 200
route-map L3-LPREF-IN permit 20
set local-preference 150
snmp-server enable traps snmp authentication linkdown linkup coldstart warmstart
snmp-server enable traps vrrp
snmp-server enable traps flowmon
snmp-server enable traps transceiver all
snmp-server enable traps ds1
snmp-server enable traps call-home message-send-fail server-fail
snmp-server enable traps tty
snmp-server enable traps license
snmp-server enable traps envmon
snmp-server enable traps ethernet cfm cc mep-up mep-down cross-connect loop config
snmp-server enable traps ethernet cfm crosscheck mep-missing mep-unknown service-up
snmp-server enable traps flash insertion removal
snmp-server enable traps mac-notification
snmp-server enable traps aaa_server
snmp-server enable traps cef resource-failure peer-state-change peer-fib-state-change inconsistency
snmp-server enable traps memory bufferpeak
snmp-server enable traps config-copy
snmp-server enable traps config
snmp-server enable traps config-ctid
snmp-server enable traps event-manager
snmp-server enable traps hsrp
snmp-server enable traps cpu threshold
snmp-server enable traps rsvp
snmp-server enable traps syslog
snmp-server enable traps vtp
snmp-server enable traps ipsla

When you were checking the ARP table was there an entry for Fast0/0/0?
HTH
Rick

ASR901 y.1731 Latest Data Table Not Populated

Why would SNMP data for a y.1731 test on an ASR901 not be populated in the ipslaEtherJitterLatestStatsEntry table?
All the data in the table is being populated with zeros, even though valid tests are being performed. There is data in the ipslaEtherJitterAggStatsEntry but only getting zeros when polling the latest table.
I have verified that following objects exist per the MIB:
- rttMonCtrlAdminRttType
- rttMonEchoAdminProtocol
Please let me know if you need anything else.

Hi,
Q Table is generated if we have time dependent display attributes for base Info Object where as Y Table is generated if we have at least one attribute defined as time-dependent navigational attribute.
Normally both Q and Y table contain same no.of entries, however in your case the reason could be that SID for some records might not have generated(assuming this could be the reason) hence you are seeing this discrepancy in record count.
Also before you proceed with any action in RSRV, you can check the records which are missing from Y table and analyze the reason for it. In RSRV if there is any is inconsistency we can see reason(error message) for inconsistency which helps us to understand the cause for this inconsistency.
By analyzing this way we can know reason for discrepancy.
Regards,
Venu Gopal

Filter in query result table not populated by criteria previously selected.

Hi Experts,
I'm currently working on the the Upgrade of our BW production line from
release 3.0b to 7.0:
Configuration of target system
BW system : Release 7.0
BEx Analyser : Release 2004s, Support Package9, Patch 1, Revision 321
Sap Gui 6.4
We're especially trying to check the non-regression of the non-converted queries in the new system (release 7.0).
And we get the following issue: After having selected the selection criteria in the selection window, the reminder of selected criteria is not done in the filter part of the target query result. Is it a normal behavior or not ?
Indeed, in the previous system configuration (BW 3.0b), the user is accustomed to seeing just above his result table the selection criteria that he had previously filled in in the selection window.
Please find herewith an example describing the problem.
Thanks in advance for your help.

In order to be more clear, hereunder an example:
- I have a field untitled "Business Division"in the selection window.*
- I fill in this field with the value "OND"
- I execute the query with this value for this field.
- The query result correclty appears.
- I click on the "Filter" button to display the Filter table with the columns "Navigation pane" and "Filter criteria".
- In the "Navigation pane", there is the field "Business Division".
- For me, the corresponding "Filter criteria" should be the value "OND", but nothing is displayed...
Thanks in advance foryour help.
Regards,
Steph

CDHRD table not populated for DFKKCOLL entries

Hi All,
On checking table TCDOB, the Change doc. object maintained for table DFKKCOLL is INKASSO_01. Even after changing the entries in DFKKCOLL table, CDHRD table has no entries for INKASSO_01. Can you please suggest what the problem might be?
Thanks,
Vaasuu

Check object INKASSO_01 in SCDO transaction.
Whether generation information exist for this object and for its includes and function module?
If no u2013 execute "Generate update pgm." for this object.
If yes u2013 may be will help you following notes (depending on release of components of your system):
   - 788337 - Change document not created during clearing/reversing,
   - 811604 - Coll/ agency: Change doc/ not created d/ dunning notice rev/,
   - 868128 - RFKKCOLL: An enqueue/dequeue is missing.

BOM and Routing import is not populating data in base table.

BOM AND ROUTING INTERFACE Import Prog is not populating base table with interface data.Even the Interface table data is not processed.I am passing process flag as 1 and transaction_type as INSERT,still the ROUTING INTERFACE TABLES are not getting processed.
passing the below details.
INSERT INTO bom.bom_op_routings_interface
        (organization_code,          assembly_item_id,          completion_subinventory,         routing_sequence_id,          organization_id,
         routing_type,          common_routing_sequence_id,          last_update_date,          last_updated_by,          creation_date,
         created_by,         last_update_login,         alternate_routing_designator,          assembly_item_number,         process_flag,
         transaction_type) ;
INSERT INTO bom.bom_op_sequences_interface
        (operation_seq_num,         department_id,         department_code,         option_dependent_flag,         operation_lead_time_percent,
         implementation_date,         effectivity_date,         disable_date,         count_point_type,         backflush_flag,         minimum_transfer_quantity,
         operation_sequence_id,         routing_sequence_id,         organization_code,         assembly_item_number,         last_update_date,
         last_updated_by,         creation_date,         created_by,         include_in_rollup,         alternate_routing_designator,         process_flag,
         transaction_type);
INSERT INTO bom.bom_op_resources_interface
        (resource_seq_num,         resource_code,         resource_id,         basis_type,         usage_rate_or_amount,         usage_rate_or_amount_inverse,
         assigned_units,         schedule_flag,         resource_offset_percent,         activity,         standard_rate_flag,         autocharge_type,         organization_code,         assembly_item_number,
         operation_seq_num,         effectivity_date,         last_update_date,         last_updated_by,         creation_date,         created_by,         alternate_routing_designator,
         operation_sequence_id,         routing_sequence_id,         process_flag,         transaction_type);
Where am I making a mistake.
Thanks in Advance.
Sambit Pradhan

Hi,
Try following
step 1. Insert routing header (bom_op_routings_interface) : Run Interface
step 2. Insert routing lines (bom_op_sequences_interface) with correct reference to routing_sequence_id: Run Interface
step 3. Insert all resource lines (bom_op_resources_interface) with correct reference to operation_sequence_id, routing_sequence_id , Run Interface.
Thanks,
Hrishi

SKB1 table is not populated - Bulgaria country version

Hi,
Our team is working on installation country version for Bulgaria.
We have ECC 6.0 and SAPK-11023INCCEE ECC Core Country versions for EEM Country (Romania country localization).
We followed the instructions of SAP note 856949 "Enhancements for mySAP R/3 46C and
higher for Bulgaria" and we face the following problem:
Table SKB1 for BG01 company code is not populated, but we have data in SKA1, SKAT tables (charts of accounts CABG).
Although we imported CT_BG_160108.zip , CT_SKB1_table_content.zip , still SKB1 table does not contain data for BG01 - company code.
Please help us to solve this problem.
Moderator: I'd suggest to open OSS message on this problem, if you are sure that you maintain the data for company code

Hello,
Here are a few hints:
- In the operator, check the steps of your interface. Are rows inserted in I$ tables ?
- If you use Flow Control, does your E$ tables contains something ?
- Check the SQL code generated in the integration step, extract the Select from it and execute it using sqlplus, SQLDeveloper or whatever you want. Does it return something ? Maybe there is a wrong filter...
If you don't find the error, tell us which IKM you use and give us the generated code of the step which returns no data.
Hope it helps

OBIEE Usage Tracking Table Is Not Populated

Hello everybody,
OBIEE Usage tracking table (s_nq_acct) is not populated correctly for last a few weeks. I have no experience on configuring / managing usage tracking jobs, so I do not know where to start to solve this problem. First of all, which log file should I go to find the problem? And also which parameters should I look? Can you help me please.
Regards,
Dilek

Check that the absolutely correct and precise connection pool information contained in your RPD matches what your entries in the MBeans which then get written to the NQSConfig.ini.
Check that your UT physical model in the RPD physical layer isn't and old (11.1.1.5) setup running on a 11.1.1.7 env where the column definitions don't match.
Several log files. NQServer.log and NQQuery.log to begin with.

Billing type is not populating table TVARVC

Hi Expert
My billing type is not populating the TVARVC table can any body explain whats needs to be done.
Regards
Sanjay

Hi Sanjay,
There is no such field in the table "TVARVC".I think you may be thinking that type field is for billing type.
It is not billing type.It is Selection category type.It has two values "S" and "P".
S means selection and P means Parameter.
So your billing type will not populate at all.
Hope this helps you.
Regards,
Krishna.

Table DBERCHZ2 not populated

Hello everybody,
When we create a billing document, it is not populated table DBERCHZ2. Only table DBERCHZ1 is populated correctly but table DBERCHZ2 is always empty when we create a billing document. Due to this, we canu2019t find the meter reading document linked to this billing document.
There isnu2019t any OSS note that explains this problem.
Ideas? Similar issue?
Thanks in advance.
Fernando.

Hello,
Just a suggestion that may help....
The problem may be with the selection screen you are using.
If you are using transaction SE16 and the field ATIM is active and the
from- and to- value is 00:00:00 ....delete the values here, that is, deselect the time fields.
Try this to see if the entries can be viewed..
Hope it helps.
Regards
Olivia

Xla_transaction_entities table is not populating

Hello everyone,
There secondary ledger table xla_transaction_entities is not populating.
The table is used to feed another table for datawarehouse.
Could anyone explain why this is happening and give a solution please?
Thank you.
Edited by: Yuvraj Keenoo on Apr 13, 2012 11:47 AM

Please find the solution in the other open question(with same query)

BSIS/BSAS tables not populated

Similar Messages

Maybe you are looking for