BSNL 3G not working in nokia 5800 US version

hi,
i bought a nokia 5800 US version unlocked mobile handset 10 months back. now i am using indian BSNL 3G SIM in india. my mobile handset is not detecting the bsnl 3G signal. from bsnl people i understood that their technology is 3.5G HSDPA 2100. according to gsmarena the US version supports "HSDPA 850 / 1900". is there a way to make it work with the bsnl 3G network?
voice calls, SMS and web browsing working.
Video calls, MMS, TV, etc... not working.
my mobile set has firmware version 21.2.025 date: 18-04-2009
RM - 428
updating the firmware with indian version firmware, will it help in solving the problem?
thanks and regards,
moses.

http://timesofindia.indiatimes.com/business/india-business/Home-ministry-tells-DoT-to-put-3G-on-hold... If this is what you are referring to then you should open your eyes and read that article fully and not just the heading. Out of my interest in which part of the world are you living? do you have any idea about the ongoing talks about the launch of 3G services by private players and one more thing spend some time in to whatever thing you are reading and atleast try to comprehend whats been conveyed there. There was no explicit statement by DoT to hold the services given by the existing players, currently only BSNL and MTNL(Mumbai). Of course I read paper daily.
If a reply has solved your problem click Accept as solution button, doing it will help others know the solution. Thanks.

Similar Messages

C1-01 not working after Nokia update

Hi,
C1-01 not working after Nokia update.
Message shows "Updating" then blank screen, any ideas?

How did you start the update? OTA or using Nokia Suite?
Try to run the update through Nokia Suite again.
If I have helped you, please hit the star at the bottom of my posts - it's appreciated!
Don't forget if your problem is solved to press the "Accept as Solution" button.

GPS not working on Nokia C7 since Belle Update

GPS IS NOT WORKING SINCE NOKIA C7 IS UPDATED FROM ANNA TO BELLE.
ON ANNA IT WAS WORKING PERFECTLY FINE..
PLEASE GUIDE ME THE SOLUTION.

Hi matemale,
If you are using just Internal GPS, could be that the location information got wiped when you did the update. In this case give the device some time to get the location, this can take relatively long time (the first time), so little patience is needed.
If you are using AGPS and Network based navigation, then do the following actions and in between them test if the device works.
Make sure the internet is on in Maps > Options (3 lines) > Settings > General > Connection > Online. Also check that the network destination is correct.
Make a back up with Nokia Suite. Type in *#7780# = soft reset, no data lost.
You can also reinstall the phone software. The process is the same as when updating with Nokia Suite, but at the end select "Reinstall".
If it's still the same, type in *#7370# = hard reset, phone memory will be wiped. Restore back up.
Hope you get the navigation working again!
Jampe
If the answer solves your issue, please click the ACCEPT AS SOLUTION button so other users can benefit from it as well. Giving a kudos (the white star) if my answer has helped will be appreciated.

Chat not working after nokia C3-01 software update...

Chat not working after nokia C3-01 software update from 5.65 to nokia 6.00

when is there's gonna this be fixed it has been more than a month
satisfaction level is decreasing with the product

Client Side Javascript Validation not Working in Struts 1.x version

hi,
I'm following the steps provioded in the below link for Javascript Client side validation but still it is not working.I'm struggling to get this work.
[http://www.visualbuilder.com/jsp/struts/tutorial2/pageorder/9/|http://www.visualbuilder.com/jsp/struts/tutorial2/pageorder/9/]
"The framework automatically generates the browser specific JavaScript and validate the data only at the client side."From the above statement i undertstand that framework itself generates the javascript function for validating the field mentioned in validations.xml file so that we dont have to explicitly write a javascript function for
validating the fields
(or)
Do we need to call an explicit function
Please need help on this.
I have followed all the steps mentioned on the above link but Client Side Javascript Validation not Working in Struts 1.x version....
Thanks and Regards,
Deepak

Hi,
Please find my steps below....still getting an error.
2> which version of commons-validation.jar needs to be downloaded ...Link please
    downloaded the latest commons-validation.jar and placed in lib.refreshed the project,and did a build.
    3> which DTD name to be specified in "validator-rules.xml" which is in accordance to commons-validator.jar file.
validator-rules.xml ::
<!DOCTYPE form-validation PUBLIC
          "-//Apache Software Foundation//DTD Commons Validator Rules Configuration 1.0//EN"
          "http://jakarta.apache.org/commons/dtds/validator_1_0.dtd">validation.xml:
<!DOCTYPE form-validation PUBLIC
"-//Apache Software Foundation//DTD Commons Validator Rules Configuration 1.0//EN"
"http://jakarta.apache.org/commons/dtds/validator_1_0.dtd">
i did as u said and im gettiong the below errorNov 5, 2009 4:33:08 PM org.apache.struts.validator.ValidatorPlugIn initResources
SEVERE: Invalid byte 2 of 2-byte UTF-8 sequence.
org.apache.commons.digester.xmlrules.XmlLoadException: Invalid byte 2 of 2-byte UTF-8 sequence.
     at org.apache.commons.digester.xmlrules.FromXmlRuleSet.addRuleInstances(FromXmlRuleSet.java:139)
     at org.apache.commons.digester.Digester.addRuleSet(Digester.java:1610)
     at org.apache.commons.digester.xmlrules.DigesterLoader.createDigester(DigesterLoader.java:89)
     at org.apache.commons.validator.ValidatorResourcesInitializer.initialize(ValidatorResourcesInitializer.java:122)
     at org.apache.struts.validator.ValidatorPlugIn.initResources(ValidatorPlugIn.java:238)
     at org.apache.struts.validator.ValidatorPlugIn.init(ValidatorPlugIn.java:181)
     at org.apache.struts.action.ActionServlet.initModulePlugIns(ActionServlet.java:1036)
     at org.apache.struts.action.ActionServlet.init(ActionServlet.java:455)
     at javax.servlet.GenericServlet.init(GenericServlet.java:212)
     at org.apache.catalina.core.StandardWrapper.loadServlet(StandardWrapper.java:1139)
     at org.apache.catalina.core.StandardWrapper.load(StandardWrapper.java:966)
     at org.apache.catalina.core.StandardContext.loadOnStartup(StandardContext.java:3996)
     at org.apache.catalina.core.StandardContext.start(StandardContext.java:4266)
     at org.apache.catalina.core.ContainerBase.addChildInternal(ContainerBase.java:760)
     at org.apache.catalina.core.ContainerBase.addChild(ContainerBase.java:740)
     at org.apache.catalina.core.StandardHost.addChild(StandardHost.java:544)
     at org.apache.catalina.startup.HostConfig.deployDirectory(HostConfig.java:927)
     at org.apache.catalina.startup.HostConfig.deployDirectories(HostConfig.java:890)
     at org.apache.catalina.startup.HostConfig.deployApps(HostConfig.java:492)
     at org.apache.catalina.startup.HostConfig.start(HostConfig.java:1150)
     at org.apache.catalina.startup.HostConfig.lifecycleEvent(HostConfig.java:311)
     at org.apache.catalina.util.LifecycleSupport.fireLifecycleEvent(LifecycleSupport.java:120)
     at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1022)
     at org.apache.catalina.core.StandardHost.start(StandardHost.java:736)
     at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1014)
     at org.apache.catalina.core.StandardEngine.start(StandardEngine.java:443)
     at org.apache.catalina.core.StandardService.start(StandardService.java:448)
     at org.apache.catalina.core.StandardServer.start(StandardServer.java:700)
     at org.apache.catalina.startup.Catalina.start(Catalina.java:552)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
     at java.lang.reflect.Method.invoke(Unknown Source)
     at org.apache.catalina.startup.Bootstrap.start(Bootstrap.java:295)
     at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:433)
Need help forum members.....
Please reply to my question 1 which has been asked before as belowDo i need to write explicit javascript function for validation in Struts (or) struts generates the javascript function by itself.??? Please explain with an example....
Edited by: Deepak_A_L on Nov 5, 2009 4:37 PM

Why does my printer HP 3080 not work with Mac OS X VERSION 10.7.5

Why does my printer HP 3080 not work with Mac OS X VERSION 10.7.5. Am I missing a driver? If so where do I go to download it? thanks

What's the full model number and name of the printer? I can't seem to find any HP printer with the numbers 3080 in the model number.
How are you connecting the printer to the Mac?
I am a printer tech for HP.

Export vCard is not working on Chrome; on Chrome Version 40.0.2214.93 m; function works on Mozilaa and IE.

Export vCard is not working on Chrome; on Chrome Version 40.0.2214.93 m; function works on Mozilaa and IE; is anyone else seeing this same issue?

Update; my OS is Windows 7 Pro 64-bit v1.08.00.AF B09 SP1. Same issue reported (by 7 others) at => https://discussions.apple.com/thread/6779059

Googlemaps will not work since I downloaded latest version of Firefox. Any suggestions? I've followed all of the troubleshooting suggestions at Googlemaps already and no luck. Thanks.

Googlemaps will not work since I downloaded latest version of Firefox. Any suggestions? I've followed all of the troubleshooting suggestions at Googlemaps already and no luck. Thanks.
== URL of affected sites ==
http://maps.google.com/

From here it looks like you used Safari instead. Lots of choices that's what I like.
You did end Firefox and try to restart didn't you?
If you did then I would expect you have a problem with your Firewall, and would have had it before, does not affect IE, it does affect Firefox, I don't know about other browsers. See
http://kb.mozillazine.org/Firewalls

Need to downgrade Nokia 5800 software version

Hi.
I upgraded my nokia 5800 software version, but after updating half screen has gone blank and other half shows some white line coming and going, i googled and got the solution that i will need to downgrade the software version, my earlier version was v20.0.0.12, now from where can i get this v20 version?Plz help me....

@Bradleyfox
Although any data would be lost you will probably have to try resetting device to "Out of box" state by keeping these three keys depressed RED, GREEN & CAMERA whilst powering on until Nokia "Shaking hands" logo appears.
Have you removed any memory card if present before trying the above?
Happy to have helped forum with a Support Ratio = 42.5

Want to know how the GPS works on nokia 5800?

Hi, are there any documentation explaining the working principle of how gps on nokia 5800 actually works? I want a kind of in-depth understanding...Thanx in advance.

Network based positioning is the fastest, but most inaccurate. Basically, it looks at what cell tower you're connected to, and approximates your location to be the location of that tower. The phone will use this FIRST (if you have enabled it), because it gives you an approximiate position while you wait for GPS to work.
Integrated GPS is the actual GPS receiver built into your phone. It receives signals from the network of GPS satellites and calculates your position. Due to the inherent design of the civilian GPS system, it takes time for the receiver to see enough satellites to figure out where you are. Because sometimes this time can be 5 minutes or more, the cell companies developed Assisted GPS.
Assisted GPS (AGPS) is just regular GPS, helped out by a server on the internet. Your phone will take partial GPS data (not enough to get a fix on its own), and send that data to a server (in our case supl.nokia.com). The server knows a LOT more about the exact locations of GPS satellites at any given time, so based on partial information it can compute a very good approximation of your location. This happens very quickly because a server has a much more powerful processor, and many more resources, than your phone (to put it simply). The amount of data actually sent is very very small (less than 1KB every time). AGPS helps out in getting a position fix quickly when the gps receiver hasn't been used for a while, or when you are in an area without great GPS reception.
So the order of methods used by the phone in your case is as follows. First it will give you an "approximate" position using Network Based Positioning. This will happen almost instantly. Then the phone will immediately get to work trying to get a GPS fix, and will use the AGPS server if you have allowed it to. Note that you must have an internet plan with your cell provider for AGPS to work, since it sends data to supl.nokia.com which is on the internet.
Hope that clarifies things,
Ravi

Not Enough Memory [Nokia 5800 Xpress Music]

Hello,
i have a nokia 5800 xpress music mobile phone.
recently, i've been facing an error while trying to change my ringtone from the profiles
when i tap on the screen on the ringing tone tab in general profile (or any other profile), an pop-up tells me the following "not enough memory to display all ringing tones, only read-only memory tones will be displayed"
then, when i tap again , the ringing tones menu open but for sure not listing all of my music files !!
i thought it's a firmware problem, i updated my 5800 to the latest v30 firmware, but the problem still persists.
please, feed me back
your help will be highly appreciated, thanks in advance
Best regards,
Solved!
Go to Solution.

take out your memory card and consider the first two options. make sure you have a back up and read carefully
1. *#7780# - Restore factory settings - resets all the settings to the default ( you will not lose any data)
Make sure you back up your data as you will lose all of it when you perform option 2 or 3 on this list. The default code for ALL operations listed here is 12345
2. *#7370# - Reformat your phone (out of the box, tho keep in mind that most newer nokia phones at least n series, e series and s60 based phones have udp - user data preservation so not ALL data may be lost. still it is a good idea to always do a back up of your stuff.)
3. This you perform as a last resort. Nothing else is working.If the phone is not showing any activity, proceed with hard formatting , turn off your phone, hold the following buttons while pressing the power button. (the default code is 12345)
hard reset - hold the following buttons *, 3 (number button) and talk/green key. turn on the phone and do not release those buttons until you see the Nokia boot up screen. once you feel the phone power up you can let go off the power button while still holding all three buttons ( for Nokia 5800XM - use the following buttons to do a hard reset, GREEN/RED/CAMERA keys pressed all at once on power up. this will only work on 5800's that have firmware version 20... and up. ) For Nokia N97 (unofficial version but works) is SHIFT /SPACE BAR / BACKSPACE while holding the power button. Again do not let go until you see the handshake screen.
If these codes are not working the only thing for you to do is contact your Nokia Care Center/Service for assistance.
You know what I love about you the most, the fact that you are not me ! In love with technology and all that it can offer. Join me in discovery....

Operamini is not working on nokia c3

I cannot access internet through operamini in nokia c3 since last 2 days.i cant even connect to m.opera.com from my phone default browser and other browsers
But i can access internet from other browsers.any of my browsers are not connecting to opera sites.
I tried to reinstall operamini by downloading it from nokia store but it is not installing.i have even restored my phone and it dint work.
Solved!
Go to Solution.

hey homie its not just your problem i am also facing the same problem in my 5800 xpress mudic opera mini is not working anymore because its signing certificates produced by thwate and versign are expired and it is not letting us to use the browser you must try uc browser or wait till opera mini 7.0 comes out hope you understood the problem now

Fring is not connecting in nokia 5800 frimware 50....

recently i have update my nokia 5800 frimware 50.0.005.
after update this i have problem to connecting fring via wifi.
error : (connection could not be establish.)
earlier fring is working fine in frimware 31.0.008
kindly give me the suggection for this
thanks in advance for help

I would suggest uninstalling and reinstalling Fring.

Firmware not updating for nokia 5800

I got my phone from chicago flagship, they said it's a Euro VErsion of nokia 5800
when I go to device updates, it says no update available, although version 11 is out.
when I do it from the PC suite, it says that your network provider has not approved the
update, no update availabe.
I'm using T-mobile US.
Anyone have a clue on how I can update my phone, I get the usual 5800 firmware 10 bugs, like
unable to edit and add birthdays on contacts, alarms not working.
I really like to have it updated.
Thanks in adance.

*#0000# what does it say when you plug in this code?
that is strange because euro codes usually are one of the first ones to get the firmware updates. you can serach your product code via google and find out if it is indeed a euro version of the code. this is an unlocked/unbranded unit right? you should have no issues in regards to provider in that case. does nokia flagship chicago have a service departmetn as well? you can always take it to them and request that they do the update for you. still this should not be the case if you have an unlocked/unbranded euro version of the device.
You know what I love about you the most, the fact that you are not me ! In love with technology and all that it can offer. Join me in discovery....

Car kit microphone not working after nokia softwar...

I have a Nokia 5800 Express Music. It was working perfect in my car Bluetooth system. Recently I updated my software version to 60.0.003. Now the microphone is not working while using the car Bluetooth system. I can hear the caller voice but they can’t listen what I say. All other phones are still working perfect with Bluetooth System. Therefore I think some bug is there with this software update. I tried changing Accessories settings to Headset, Wireless Car Kit etc., but still the problem exist.
Please me to find some way to make the mic working or else help me to downgrade my phone software to earlier version.

please somebody help.......

BSNL 3G not working in nokia 5800 US version

Similar Messages

Maybe you are looking for