BSOD and Memory (perhaps)
Over the last six weeks I have run into a number of BSOD issues which have left me both perplexed and yet and at the same time livid.
The messages onscreen are inconsistent although the crash invariable occurs when playing a game, every game in fact except Medieval Total war (for some reason).
I have attempted to analyse the memory - memtest ran overnight and found no errors. The finger of blame then shifted to point to Norton which has now been blown away, PSU has been checked, thermal paste reapplied etc etc
I was having issues with Nvidia 57.62 drivers but rolled back to 53.03 and that situation seemed to resolve itself in as much as no specific dll was mentioned on the BSOD. Every message seems to point to memory (when followed up on Google) but I would like to resolve any problem if I can rather than replace the memory sticks.
Memory timings were set by SPD at 7-3-3-2 and Crucial are a company related to Microm if that helps
IRQ settings are as follows - if that helps
IRQ 0 System timer OK
IRQ 1 Standard 101/102-Key or Microsoft Natural PS/2 Keyboard OK
IRQ 3 Communications Port (COM2) OK
IRQ 4 Communications Port (COM1) OK
IRQ 6 Standard floppy disk controller OK
IRQ 8 System CMOS/real time clock OK
IRQ 9 Microsoft ACPI-Compliant System OK
IRQ 11 NVIDIA nForce PCI System Management OK
IRQ 13 Numeric data processor OK
IRQ 14 Primary IDE Channel OK
IRQ 15 Secondary IDE Channel OK
IRQ 19 NVIDIA GeForce FX 5700 Ultra OK
IRQ 20 Standard OpenHCD USB Host Controller OK
IRQ 20 NVIDIA(R) nForce(TM) Audio Codec Interface OK
IRQ 21 Standard Enhanced PCI to USB Host Controller OK
IRQ 21 OHCI Compliant IEEE 1394 Host Controller OK
IRQ 22 Standard OpenHCD USB Host Controller OK
IRQ 22 NVIDIA(R) nForce(TM) MCP Audio Processing Unit (Dolby(R) Digital) OK
Sorry to be vague with the BSOD message info but if I see one more tonight Mr Fist will meet Mr Screen at extreme velocity
Thanks in Advance
IRQ's are fine
So drivers and Norton are the only thing you've introduced to this system prior to this problem?
How long has this OS been up and running?
Have you installed a lot of programs and/or uninstalled them?
At first, I would consider several things.
I need to look back and try to remember when it started happening and then try to tie in what how and when (changes) I've made to the OS, such as new programs, drivers, introuduced new hardware etc. After some investigation, if I can't attribute this problem to possibly any changes I may have made, then I have to consider a hardware or power problem. I don't have either of the latter as I have a good supply like you and I use a UPS with a line conditioner.
You've tested the RAM but that doesn't rule out a problem completely but good enough to look elsewhere for the time being. If it worked great before, no sense in changing memory settings, logic tells me that's like swatting the dog for crapping on your new carpet, when it was really your one year old's diaper that's leaking.
By now I may have come to the conclusion it's probably me that's introduced or had a hand in cocking up my system and I consider a full reformat and re-install to verify my suspicion. It's certainly takes me less time to load the OS then to nitpick around, especially with how I beat up my OS on a regular basis. I can't even go 9 months before I decide it's time.
Just some things to think about, no point in getting angry at a computer, you own it so you have a right to abuse it
Similar Messages
-
Hi,
The MAPS app, is incapable of finding adresses eventhough I copied said adress from the MAPS app onto my adress book. What is the matter with this app???
Also I can't find a way to calculate an itinirary between two destinations other if one of the two is not necessaraly my PRESENT LOCATION. Is there a way to do it? And I never get multiple itiniraries wich is a problem when I know there is construction work on the most obvious itinirary.
Furthermore, an adress or a phone numbre sent by email or text message is not identified by my phone as such so I cannot click on it to go directly to the MAPS app or the automaticaly dial the phone number.
LOGICIEL
My BlackBerry Link freezes 50% of the time on my iMac, does this also happen on a PC?
Added Memory card
Is there a way to transfer excess data to my multimedia memory card?
NICNicolasCleroux wrote:
Added Memory card
Is there a way to transfer excess data to my multimedia memory card?
HOW DO I TRANSFER EXCESS DATA FROM MY BBZ10 MEMORY, TO THE MULTIMEDIA MEMORY CARD I ADDED TO MY BBZ10.
NicolasCleroux, I asked above and you've yet to answer... what is this "excess data" you speak of?
Please, scroll up, read and answer that, and then perhaps we can deal with that... What do you consider "excess" data?
NicolasCleroux wrote:
LOGICIEL
My BlackBerry Link freezes 50% of the time on my iMac, does this also happen on a PC?
IS IT A PROBLEM ON A PC??
For some, Link is a problem on Mac and Windows. I've had some isues with it on my Win7 PC, but it does work after some fixing of issues in my firewall and proxy settings.
NicolasCleroux wrote:
Furthermore, an adress or a phone numbre sent by email or text message is not identified by my phone as such so I cannot click on it to go directly to the MAPS app or the automaticaly dial the phone number.
WHEN I SAY "IDENTIFY" I MEAN THAT THE ADRESS OR PHONE NUMBER CANNOT BE CLICKED ON TO ACCESS DIRECTLY THE RELEVANT APP ( PHONE OR MAPS)
Make sure those phone numbers are formatted properly to be recognized as a phone number or address.
For instance, where I am, a phone number formatted as xxx-xxx-xxxx work and is "hot-linked" to dial the number.
Similarly, with an address: 123 Street, city, St, Zip" will create a hot-linked address openable in BlackBerry Maps.
I know in my own Address Book's contacts, i have several linked addresses which open in maps, and you will see them in a highlighted blue text if they are recognized as such.
So, please give an example of how your phone numbers and addresses are formatted?
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
New build keeps BSOD and freezing
HI all
Right here we go
i have built a PC for my son specs are
OS: win7 home 64bit
Motherboard: msi Z87 G45
Memory: patriot viper 3 1600 8GB
GPU: Gigabyte 650TI 2GB
CPU: I5 4670K Haswell
PSU: Be Quiet! CM BQT L8-730W PSU Pure Power
HDD: Seagate 1TB Barracuda
I loaded all the software and updated all drivers and the bios.
The pc either crashes bsod or freezes when installing certain games (star craft and Guild wars) but will play others without issue, it has crashed while opening some web pages and defraggler
I have so far:
I have swapped both the GPU, PSU and memory with my other PC but it keeps crashing while theses items cause no issues on my pc .
I have scanned the memory with Memtest but nothing shows up.
I was done a complete re-install after a format.
I have change the HDD and even installed with the 32 Bit version in-case it was the 64bit disc.
I have checked and re seated all componants including the CPU.
the only two parts i havent changed is the CPU and the Motherboard.
Here are just a few of the BSOD reports:
==================================================
Dump File : 100613-18969-01.dmp
Crash Time : 06/10/2013 12:59:23
Bug Check String : CACHE_MANAGER
Bug Check Code : 0x00000034
Parameter 1 : 00000000`00050853
Parameter 2 : fffff880`03185618
Parameter 3 : fffff880`03184e70
Parameter 4 : fffff800`02d004b4
Caused By Driver : ataport.SYS
Caused By Address : ataport.SYS+f5ad
File Description :
Product Name :
Company :
File Version :
Processor : x64
Crash Address : ntoskrnl.exe+75b80
Stack Address 1 :
Stack Address 2 :
Stack Address 3 :
Computer Name :
Full Path : C:\Windows\Minidump\100613-18969-01.dmp
Processors Count : 4
Major Version : 15
Minor Version : 7601
Dump File Size : 289,312
Dump File Time : 06/10/2013 13:00:18
==================================================
==================================================
Dump File : 100613-21200-01.dmp
Crash Time : 06/10/2013 13:10:35
Bug Check String : PAGE_FAULT_IN_NONPAGED_AREA
Bug Check Code : 0x00000050
Parameter 1 : fffff280`0a480828
Parameter 2 : 00000000`00000000
Parameter 3 : fffff800`03043fa5
Parameter 4 : 00000000`00000007
Caused By Driver : ntoskrnl.exe
Caused By Address : ntoskrnl.exe+75b80
File Description : NT Kernel & System
Product Name : Microsoft® Windows® Operating System
Company : Microsoft Corporation
File Version : 6.1.7601.18247 (win7sp1_gdr.130828-1532)
Processor : x64
Crash Address : ntoskrnl.exe+75b80
Stack Address 1 :
Stack Address 2 :
Stack Address 3 :
Computer Name :
Full Path : C:\Windows\Minidump\100613-21200-01.dmp
Processors Count : 4
Major Version : 15
Minor Version : 7601
Dump File Size : 284,792
Dump File Time : 06/10/2013 13:11:24
==================================================
==================================================
Dump File : 100713-21684-01.dmp
Crash Time : 07/10/2013 10:34:12
Bug Check String : MEMORY_MANAGEMENT
Bug Check Code : 0x0000001a
Parameter 1 : 00000000`00005100
Parameter 2 : fffff6fc`4004fdf0
Parameter 3 : 00000000`00000003
Parameter 4 : 00000000`00000001
Caused By Driver : ntoskrnl.exe
Caused By Address : ntoskrnl.exe+75b80
File Description : NT Kernel & System
Product Name : Microsoft® Windows® Operating System
Company : Microsoft Corporation
File Version : 6.1.7601.18247 (win7sp1_gdr.130828-1532)
Processor : x64
Crash Address : ntoskrnl.exe+75b80
Stack Address 1 :
Stack Address 2 :
Stack Address 3 :
Computer Name :
Full Path : C:\Windows\Minidump\100713-21684-01.dmp
Processors Count : 4
Major Version : 15
Minor Version : 7601
Dump File Size : 286,400
Dump File Time : 07/10/2013 10:35:48
==================================================
Any advice (before i start to lose what hair i have left)would be much appreciated
Daveok, got bsod, bios updated 1.6B2, after sleep got blue screen
"Who Crashed"
This was probably caused by the following module: ntoskrnl.exe (nt+0x75B80)
Bugcheck code: 0x1A (0x41287, 0x30, 0x0, 0x0)
Error: MEMORY_MANAGEMENT
file path: C:\Windows\system32\ntoskrnl.exe
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: NT Kernel & System
Bug check description: This indicates that a severe memory management error occurred.
This might be a case of memory corruption. More often memory corruption happens because of software errors in buggy drivers, not because of faulty RAM modules.
The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time.
BlueScreenView
==================================================
Filename : ntoskrnl.exe
Address In Stack : ntoskrnl.exe+ed22
From Address : fffff800`02e06000
To Address : fffff800`033ec000
Size : 0x005e6000
Time Stamp : 0x51fb06cd
Product Name : Microsoft® Windows® Operating System
File Description : NT Kernel & System
File Version : 6.1.7601.18229 (win7sp1_gdr.130801-1533)
Company : Microsoft Corporation
Full Path : C:\Windows\system32\ntoskrnl.exe
==================================================
only changes in bios i got is memory XMP profile 1 2400 Hz.
memory placed only 8gigs in 4th slot, several times even bios dont start when memory in this slot.
What this can be?
bad slot?
memory incompatibility?
I need some tips, suggestion. -
Hi ,
I want to setup hyper-v host with 128 GB RAM , Windows 2012 R2
What is recommended size of System drive to keep operating system files , paging files and Memory Dump?
I tested to using 150 GB , but when the server is crashed, there is no free space to keep memory dump file.
RamyHi Ramy,
For Server 2012R2 the absolute minimum system drive is 32Gb but this assume you have limited RAM or have your Page file located on another drive. It used to be best practice to setup a small page file but MS PFE now suggest leaving windows to manage
the page file size.
Obviously this is not always possible depending on the amount of RAM in the system, but base the system drive around this or offload the Page file to perhaps another drive. On top of this you also need space for the memory dump to be written, potentially
again up to the size of the RAM. Assuming you fire the machine back up after a crash, you need space for the OS, the Page File plus space for the associated dump file.
There is a nice little article here that maybe of assistance: http://social.technet.microsoft.com/wiki/contents/articles/13383.best-practices-for-page-file-and-minimum-drive-size-for-os-partition-on-windows-servers.aspx
Kind Regards
Michael Coutanche
Blog:
Twitter: LinkedIn:
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose. -
JPA @Lob annotation and memory problem
Hi.
Is there any way to overcome the memory problem with @Lob types?
FetchType.LAZY means lazy as it spelled. Am I right?
And it doesn't mean any stream handling of big sized lobs. For lobs are so big that my physical memory can't hold it.
@Entity public class Parent implements Serializable {
@Lob private byte[] big; // what can I do if it is to big to hold in memory?
}Is there any standard way for this problem?
I found that openejb serves *@Persistent* annotation for InputStream/Reader for this purpose.
But I want to know if there is another way for more portability.
You know what?
I heard from a JPA spec guy that this problem (maybe it's not a problem) won't even be considered in next version. (2.0?)
How horrible...
Is it can be a good think that split the Lob column into a OneToMany children?
This is the best output, for now, from my head.
@Entity public class Parent implements Serializable {
@OneToMany private Collection<Child> children;
@Entity public class Child implements Serializable {
@Lob private byte[] chopped; // small enough to fit into memory
}If the Lob is too big for your memory, then you are best off handling whatever processing you need to do on it through raw JDBC. If your only interested on the first n bytes, then you could probably map to something like this using a view the truncate the lob, and map your class to the view instead of the table.
You should also be able to define your variable as Blob or Clob and get the locator directly. But the locator is tied to the connection, so will not be usable after the connection is returned to the pool. I'm not sure how such a lob could be model if it can't be read into memory, perhaps as some special JPA Lob type that can return a stream on the data by re-querying the lob from the db.
What exactly to you want to do with the lob?
-- James : http://www.eclipselink.org -
Hi!
I would like to know if there is any way of getting system CPU and memory usage using Java code.I want to get the system CPU and memory usage using the performance monitor dll, the perfctrs.dll, but access this data using Java language.Then you should create wrapper dll between your java code and perfctrs.dll and convert data from format of dll to format of your java code.
So, that is next question - how to create wrapper dll, how to deal with or how perfctrs.dll works? -
So our customer has asked us to compare compare Amazon Workspace and Azure RemoteApp offerings for them to choose from. While looking at Amazon Workspace, it clealy defines bundles with specific CPU cores, memory and user storage. However, Azure RemoteApp
only specifies user storage and vaguely compares its basic vs. standard plans in terms of "task worker" vs. "information worker"
I tried looking up its documentation but couldn't find specific CPU cores that are dedicated per user in basic vs. standard plans. I have following questions:
Can anyone point me in the right direction or help understand how many CPU cores and memory are dedicated (or shared) per user in each plan?
Our customer would most likely need a "custom" image for their custom apps. Is it possible for us to choose specific CPU cores and memory for the users to be able to run their apps in azure remoteapp?
In case i am misunderstanding the basic difference between AWS workspace and Azure RemoteApp, i'd appreciate some help in understanding it as well.
Thanks!Hi,
With Azure RemoteApp users see just the applications themselves, and the applications appear to be running on their local machine similar to other programs. With Workspaces users connect to a full desktop and launch applications within that.
1. Azure RemoteApp currently uses size A3 Virtual Machines, which have 4 vCPUs and 7GB RAM. Under Basic each VM can have a maximum of 16 users using it whereas under Standard each VM is limited to 10 users. The amount of CPU available
to a user depends on what the current demands are on the CPU at that moment from other users and system processes that may be on the server.
For example, say a user is logged on to a VM with 3 other users and the other users are idle (not consuming any CPU). At that moment the user could use all 4 vCPUs if a program they are running needed to. If a few moments later
the other 3 users all needed lots of CPU as well, then the first user would only have approximately 1 vCPU for their use. The process is dynamic and seeks to give each user their fair share of available CPU when there are multiple users demanding CPU.
Under the Standard plan a user will receive approximately a minimum of .4 vCPU assuming that the VM has the maximum number of users logged on and that all users are using as much CPU as possible at a given moment. Under the Basic plan the approximate
minimum would be .25 vCPU.
2. You cannot choose the specific number of cores and memory. What you can do is choose the Azure RemoteApp billing plan, which affects the user density of each VM as described above. If you need a lower density than Standard you
may contact support.
-TP -
What is FF doing when it sets at idle with nothing streaming , playing or such and uses 40-70% of CPU and memory usage keeps on going up. I just set there and watch in the task manager. Every other program uses nothing,
There has to be a programmer intelligent enough to fix this. this has been going on for years.SImple fact is there is all "fixes" and answers are bogus. Just try using the same tabs in any other browser.
Right now Opera is 2-3% idle no memory problems. other browsers are similiar and I will post.
Mozzila is just like Microsoft . They have no desire to fix the problem -
Can I upgrade the chip and memory? if so what can I use. The system is a little too slow. Yes I have all the software to speed it up. Thanks
HP 2000 Notebook PC Windows 8.1 64-bit [Edited for Personal Information] AMD E-300 APU with Radeon(tm) HD Graphics microprocessor 4GB SODIMM Kinston 800MHz memory 188B KBC Version 69.18 system board F.37 system bios HGST HTS545032A7E380 SATA Disk Device Product number: E0M17UA#ABA AMD E-300 APU with Radeon(tm) HD GraphicsHere is the Service Manual:
http://h10032.www1.hp.com/ctg/Manual/c03763129.pdf
Go through Page 16-17. Each different processor is soldered to the board, so you've to replace the whole motherboard for that, you can see that their part numbers are different according to three different boards.
I suggest RAM upgrade from 4 to 8GB by adding another 4GB in the other vacant slot, with configuration DDR3 1333MHz dual channel boost.
thanks,
++Please click KUDOS / White thumb to say thanks
++Please click ACCEPT AS SOLUTION to help others, find this solution faster
**I'm a Volunteer, I do not work for HP** -
HDD and memory upgrade on Satellite A350
Hi All
I have a satellite a350 laptop can anyone tell me whats the biggest harddrive I can have and memory please
ThanksHi
The RAM upgrade depends on the available chipset.
Not quite sure about your A350-xxx model but many of the Sat A350 notebooks were quipped with an Intel GM45 Express chipset and in such case you could upgrade the memory max up to 8GB RAM
Regarding the HDD: This notebook supports SATA HDD. This mean that you are not limited to an special size.
Theoretically it could be possible to use 500GB, 750GB 2.5 SATA HDDs -
MSI 785GM-E51 and memory modules problems
Could anyone help me with one problem. I have motherboard MSI 785GM-E51 and 4 memory modules GOODRAM GR 1333D364L9/2G. But when I'm inserting ALL modules my system not starting (even POST procedure). So working variants - when I'm inserting:
- one module in first (boot) slot
or
- they inserted in first and third memory slots
Any ideas?It is not motherboard problem, but processor itself - I have AMD Phenom II X4 965 Black Edition 3,4 Ghz Core Revision C2 and this revision (according to the article: http://www.fcenter.ru/online.shtml?articles/hardware/processors/27650#02) has problems with support memory modules DDR3-1333 Mhz more than 2 modules. Conclusion - either adjust BIOS settings concerning memory timings and memory controller voltage or replace this kind of processor with the same type but with core revision C3
-
How to display CPU and memory utilization from ST06 in a report
Hi,
I want to display CPU Utilization and Memory utilization and File sys details from ST06 transaction in a report.
Is there any function module or any other method to do that.
Please advice.
Thanks,
Sandeep.Hi Ranganath,
Thanks for your time.
And thank you very much for the reply.
Both the function modules are helpful.
But can u also help me in getting the data of FileSys from ST06.
Thankyou,
Sandeep. -
Profile Performanc​e and memory
Hi, guys
I am trying to analysis my Profile Data for the Profile Performance and memory.
When I check the data for VI Time, I found there are same VIs with different VI Time, what is that mean
The reason why I am doing this is because I am going to add pulse model for my VI, so I need to know the relationship between my all instruments and time, Am I in the right track
Thanks
Solved!
Go to Solution.
Attachments:
VI Time.png 72 KBIt looks like the timing had a resolution of 15.6 ms, which I think is common on some flavors of the Windows OS. Note that the average times on some of those VIs is zero. This suggessts that for many of the 1878 runs the time was probably recorded as zero and a few were at 15.6 ms.
This is one of the limitations of the Profiler.
Lynn -
Profile Performanc​e and Memory shows very large 'VI Time' value
When I run the Profile Performance and Memory tool on my project, I get very large numbers for VI Time (and Sub VIs Time and Total Time) for some VIs. For example 1844674407370752.5. I have selected only 'Timing statistics' and 'Timing details'. Sometimes the numbers start with reasonable values, then when updating the display with the snapshot button they might get large and stay large. Other VI Times remain reasonable.
LabVIEW 2011 Version 11.0 (32-bit). Windows 7.
What gives?
- lesles,
the number indicates some kind of overroll.... so, do you have a vi where this happens all the time? Can you share this with us?
thanks,
Norbert
CEO: What exactly is stopping us from doing this?
Expert: Geometry
Marketing Manager: Just ignore it. -
Hard Drive and memory upgrade on macbook pro (13" mid 2009)
I want to upgrade my current hard drive and memory (currently 250gb and 4 gb) but i'm having trouble to find out which one is going to fit.
I considered buying this ones
http://www.bestbuy.com/site/Western+Digital+-+Scorpio+Blue+1TB+Internal+Serial+A TA+Hard+Drive+for+Laptops/9960668.p?skuId=9960668&productCategoryId=pcmcat189600 050008&id=1218253425468
http://www.bestbuy.com/site/Kingston+Technology+-+4GB+PC3-8500+DDR3+SoDIMM+Lapto p+Memory/2129381.p?skuId=2129381&productCategoryId=abcat0506002&id=1218404812331
Any ideas?OWC is a reputable supplier of hard drives and RAM upgrades to the Mac community.
Go to their site, lookup your model MacBook Pro and see what upgrades are available.
The 1tb WD Scorpio Blue is a 5400rpm drive and slower than the crop of 7200rpm drives.
Do you need space over speed?
Maybe you are looking for
-
Extra characters introduced in InDesign
I am using InDesign CS4 and I have a problem in hyphenation. When I select the language "Swedish", the word "tillämpliga" is hyphenated with one more extra character being introduced. And when I select the language "English:USA" the same word hyphena
-
Java.text.SimpleDateFormat with zones
Hi, I have a log file which has a date format as below: 20091224060656.000000+060 Wondering if java.text.SimpleDateFormat would be able to parse it properly.I was seeing this API and it didnot have any exact syntax for parsing this kind of date forma
-
hi , if user is on leave, and he is not maintained the substitution. then wokitem go to in his inbox. for this problem how can i solve . i heard that workflow adminstrator can put subtitute for any user, how? if workitem already went to user inbox, h
-
Il arrive que lorsque je veux imprimer une photo (imprimante Epson stylus DX 5050) PSE se ferme complètement lorsque je valide sur la fenêtre "Tirages". Pourtant dans le dernier cas j'avais imprimé 3 photos juste avant sans problème et avec les même
-
Error: (-36) SrcErr:YES Copying /.journal to (null)
Not a huge concern since TM is still backing up successfully, but I didn't see this specific error in the troubleshooting guide. Maybe I'm a little OCD but when I see any errors in logs I get a bit twitchy. Anyway, my TM log is: Starting standard bac