BSOD appears to occur everytime the system tries to access a 2nd HDD (IDE)

Pretty much as above, one day I left my machine ripping a CD into iTunes (stored on 2nd IDE drive) and when I returned the machine had hung with a blank screen.
I then tried everything to wake the machine up but nothing except a reboot worked.
Then when it started to reboot it would just BSOD on windows startup, sometimes during startup other times after I had entered my login details.
I have done some testing and seem to have narrowed it down to the 2nd HDD. If I don't access the 2nd HDD (for example by disabling it in the bios) machine seems to work OK, but as soon as I try and access the disk, even to save a file on it instant BSOD.
If anyone can offer some guidance it would be greatly appreciated. 

I'm having this same problem with my newly built system, but in my case it happens only when doing large, continuous reads or writes to the IDE hard drive. The other two SATA hard drives work perfectly. At first I thought it was some teething bugs in the bios or drivers, but I was worried about the PSU as well. I've only swapped out the mb, cpu, memory and graphics card, so I know that there's nothing wrong with the HDDs or the cables, but with the added load to the PSU... Seems odd though that it would manifest itself only when accessing the IDE hard drive.
I will try to make further tests with other PSUs, and I've ordered a IDE2SATA adapter and will try that as well.

Similar Messages

  • I'm trying to use FaceTime but when I try to log in, the system tries to verify and gives me a number to call Apple to complete registration.  Is there anything I can do?

    I'm trying to use FaceTime from my IMac OS Version 10.8.5 but when I try to log in, the system tries to verify and gives me a number to call Apple to complete registration.  Is there anything I can do? 

    There is no official public documentation of that alert as far as I know.
    If you're trying to sign in to FaceTime, try to sign in to iMessage in the Messages application, or vice versa.
    Otherwise, do as the alert directs. According to reports, you won't be charged for the support call if you select "Apple ID"—not the hardware model—as the product you're asking about, and cite the "customer code" in the alert as the "validation code" when you speak to the Apple representative.

  • System error 3 has occurred. The system cannot find the path specified

    Enterprise Manager 12c Release 2 - 12.1.0.2.0
    Agent Deployment Failed - host agent for Windows 32 bit, version 12.1.0.2
    Deployment Phase Name: Secure Agent
    Error: Execution of command C:/cygwin/bin/sh.exe -c 'export NEED_EXIT_CODE=1 && C:/oracle/product/emagent12/agent_inst/bin/emctl.bat start agent' on host myhost.mydomain.com Failed
    Cause: Error Message: System error 3 has occurred. The system cannot find the path specified. Exit Code :2
    Recommendation:
    Fix the cause of the error and retry the operation (or) manually run the following commands on the remote host
    C:/cygwin/bin/sh.exe -c 'export NEED_EXIT_CODE=1 && C:/oracle/product/emagent12/agent_inst/bin/emctl.bat secure agent'
    C:/cygwin/bin/sh.exe -c 'export NEED_EXIT_CODE=1 && C:/oracle/product/emagent12/agent_inst/bin/emctl.bat start agent'
    C:/cygwin/bin/sh.exe -c 'export NEED_EXIT_CODE=1 && C:/oracle/product/emagent12/agent_inst/bin/emctl.bat config agent addinternaltargets'
    Any ideas? thanks

    I installed Cygwin, and it's working fine I suppose. From my EM12c host I can connect to the Windows host via SSH:
    ssh WinHost
    The authenticity of host 'WinHost (XXX.XXX.XXX.XXX)' can't be established.
    RSA key fingerprint is XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX:XX.
    Are you sure you want to continue connecting (yes/no)? yes
    Warning: Permanently added 'WinHost' (RSA) to the list of known hosts.
    oracle@WinHost's password:
    Last login: Wed Sep 19 17:26:40 2012 from SomeHost
    oracle@WinHost ~
    $ cygrunsrv -h
    Usage: cygrunsrv [OPTION]...
    Main options: Exactly one is required.
    -I, --install <svc_name>  Installes a new service named <svc_name>.
    -R, --remove <svc_name>   Removes a service named <svc_name>.
    ----------------- blah blah blah ------------------------------------
    Report bugs to <[email protected]>.
    oracle@WinHost ~
    $ date
    Thu, Sep 20, 2012 10:10:01 AM
    oracle@WinHost ~
    $ cd /cygdrive/c/oracle/product/emagent12/ - this is the folder where I try to install the agent
    oracle@WinHost /cygdrive/c/oracle/product/emagent12
    $ ls -la
    total 0
    drwx------+ 1 oracle None 0 Sep 20 09:55 .
    drwx------+ 1 WinHostAdmin None 0 Sep 19 12:31 ..
    Thanks

  • An error has occurred in the system "ECC" while copying the document

    Hello Experts,
    When I'm creating service orders in CRM UI and saving them I'm receiving this error:
    An error has occurred in the system "ECC" while copying the document
    Details:
    An error has occurred in the system "ECC" while copying the document
    Message no. CRM_ORDER_MISC 020
    Diagnosis
    Errors have occurred while transferring the document into another system. Refer to the enclosed log to view the error messages.
    Transmission log
    Error occurred during determination of profitability segment (Notification E IAOM 025)
    Profit center for CRM integration not found (Notification E KECRMPCA 001)
    Error occurred during determination of profitability segment (Notification E IAOM 025)
    Account assignment error in internal order K1153000004111 for position 2000000990/0000000020 (Notification E C( 321)
    Regarding to the account assignement, we developed a field to input Accounts IDS for WBS.
    This field has a customization table related which allows to visualize in a dropdown list the allowed WBS ID per user according to the entries in the table.
    Also, In the Service Order there is one status that triggers an action that creates a Sales Order in CRM that is replicated in ECC, but since I have this error Sales order is not being replicated in ECC.
    Any ideas?
    Kindly Regards,

    HI,
    Please check these threads:
    CRM-COPA- An error occurred in system EEPCLNTXXX during account assignment
    http://www.riderspider.com/2010/11/error-error-occured-in-system-dv1cltecc.html#more
    Denis.

  • An error has occurred in the system DV1CLNT400 while copying the document

    Hi All,
    While creating complaint confirmation i am getting below mentioned Errors in ECC.
    Can any body provide configuration settings.
    An error has occurred in the system DV1CLNT400 while copying the document
    Message no. CRM_ORDER_MISC 020
    Diagnosis
    Errors have occurred while transferring the document into another system. Refer to the enclosed log to view the error messages.
    Transmission log
    No operating concern has been assigned to controlling area 1001 (Notification E KE 300)
    Error occurred during determination of profitability segment (Notification W IAOM 025)
    Error occurred during creation of settlement rule (Notification I IAOM 046)
    Regards,
    Teja

    Hi,
    From the nature of Error messages, it looks like these are related Customization settings. As you mentioned your SAP CRM system is connected to SAP ERP system, so Controlling documents and other account postings are happening there.
    So, the best approach will be to get in touch with your functional consultant who will be the best person to guide you with the scenario and the respective process setup. You can also have a look at SAP HELP about the integration of the CRM and ERP systems along with the data exchange.
    Hope this will help.
    Thanks,
    Samantak.

  • I am trying to use automator to open a safari popup window that will automatically log me into whatever account and I attempted to type up an applescript that utilized the "System Events" function with no avail, any ideas?

    I am trying to use automator to open a safari popup window that will automatically log me into whatever account and I attempted to type up an applescript that utilized the "System Events" function with no avail, any ideas?

    Hi
    In iMovie'11 (version 9.0.x)
    on top menu row - Apple/iMovie/File/Edit/Cut (Can vary dep. on language - in Swedish Apple/iMovie/Arkiv/Redigera/Klipp . . . )
    down Cut menu - Slow playback/Raspid Playback/Re-play in Slow Motion and onvards
    Here one can select the Pre-Set speeds
    Are you familiar with getting 'inspector' to run?
    No - but I guess that Double Click on clip/sequense or ctrl-Click on it might open it.
    Yours Bengt W

  • An error has occured in the system KRP810 while copying the document

    Hello Experts,
    In my project while saving the service confirmation transaction i am getting the below error. Below is the complete description of the error.
    An error has occured in the system KRP810 while copying the document
    Message no. CRM_ORDER_MISC 020
    *Diagnosis*
    *Errors have occured while transferring the document into another system. Remove the error messages from the enclosed log.*
    *Transmission log*
    *Number of hours recorded 16,04 exceeds target hours 0,00 (Notification W LR 206)*
    *Updating could not be completed (Notification E S& 150)*
    Could any one of you tell me , how can we remove the error and what is the reason behind this error.
    Thank you in advance.
    Thanks & regards,
    Vamsi krishna.

    need to replace confirmation

  • Bootcamp disk icon does not appear in the System Preferences/Startup Disk. Any help ideas ?

    Everything works fine but the Bootcamp disk icon does not appear in the System Preferences/Startup Disk.
    When I am in Win7 I am easily rebooting my iMac by right-clicking on the Bootcamp icon.
    When I am in Mac OS I wish to do same but that Bootcamp icon does not appear. Everytime I am restarting my iMac and pressing on the Option key to select the Windows disk.
    Does anyone have an idea how to adjust to bring the Bootcamp icon to the Startup Disk panel ?

    Use BootChamp instead; perhaps you have an NTFS 3rd party driver installed and has its own control panel.

  • My 2008 17in MBP has 512mb vram, but the system profile is showing 256mb. Any ideas?

    I just bought a early 2008 17" MBP from a friend. According to the specification underneath the laptop, its a A1261 model with 512vram. However in OS X hardware profile, the system indicates that there is 256mb of vram. Does anybody have any idea what is going on?

    Photocathode,
    perhaps some of its VRAM is faulty? Have you tried running its Apple Hardware Test, to see if it can detect anything amiss?

  • One of millions of Pentium ll systems trying to access older versions

    One of millions of Pentium ll computers trying to access your wonderful site/ with the older versions at the bottom of the page. ...And which are perfectly wonderful and didn't need these NEW upgrade things...it's junk....a big clue by the way to the problems with the economy (do they really believe all these computers will go in the trash every few years to buy a new one? And how many people can't get on their own sites unless they buy a new computer?
    ECONOMY? I need a 2. version HERE.

    For those that really need an earlier version of Firefox
    * ftp://ftp.mozilla.org/pub/firefox/releases/
    When reinstalling Firefox from a download, Firefox must be down once the installation starts. When the installation finishes, don't let the install start firefox for you. Instead end the install and start Firefox in your normal manner, thus preventing creating a new profile which does not have your bookmarks cookies, etc (but your old profile would still be around and would).

  • The little gear wheel keeps appearing thus slowing down the system

    My system is being slowed down by the appearance of the little gear wheel turning around & around.

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    The title of the Console window should be All Messages. If it isn't, select
              SYSTEM LOG QUERIES ▹ All Messages
    from the log list on the left. If you don't see that list, select
              View ▹ Show Log List
    from the menu bar at the top of the screen.Click the Clear Display icon in the toolbar. Then take one of the actions that you're having trouble with. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
    The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
    Please don't indiscriminately dump thousands of lines from the log into this discussion.
    Please don't post screenshots of log messages—post the text.
    Some private information, such as your name, may appear in the log. Anonymize before posting.

  • Im practically a novice to Mac Operating systems but just bought a MacBook pro, installing windows through boot camp on the system I cannot access apple operating systems what do I do

    i tried to install windows 7 through the Boot Camp provision  on my MacBook Pro which was successful but cant have access to Apple operating system its booting from windows only

    Thanks very much knucklesmac, Im from Ghana I first bought my Ipad 2 in Calgary 27 Sept 211, Ive since loved apple products but Im not a computer geek, but would certainly love to be one Im ok with windows though.
    Now the partition I craeted through windows was too small, not only that the widow 7 cd refused to come out.whats the next move, i wish to be initiiated into the apple cult the machines are sleek and beautiful

  • Visual Web JSF web app unable to render. The theme tries to access META-INF

    Hi,
    BACKGROUND: I have created a Netbeans 6 Visual Web Project using the default Visual Web JSF Theme. My web application can be viewed properly and correctly when i deploy it on tomcat 6.
    ARCHITECTURE: Our server configuration requires IIS to be our web server and tomcat to be our app server. Both are running on different machines. I have successfully linked up IIS 6 and tomcat 6 using the JK isapi_redirector.
    PROBLEM: However, when i connect to my app via IIS, my starting page opens but the input box components on that page are not displayed and i get several javascript errors that read - 'dojo is undefined' and 'webui is undefined'.
    PROBLEM DETAILS: I found that the page being served had a lot of files being requested from a META-INF folder. I have attached a snippet here.
    <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
    <html xmlns="http://www.w3.org/1999/xhtml" xmlns:wairole="http://www.w3.org/2005/01/wai-rdf/GUIRoleTaxonomy#" xmlns:waistate="http://www.w3.org/2005/07/aaa">
    <head>
    <title></title><link rel="stylesheet" type="text/css" href="/BMC/theme/com/sun/webui/jsf/suntheme4_1_1/css/css_master-all.css" /><link rel="stylesheet" type="text/css" href="/BMC/theme/com/sun/webui/jsf/suntheme4_1_1/css/ie.css" /><script type="text/javascript">var djConfig={"parseOnLoad":false,"isDebug":false}</script><script type="text/javascript" src="/BMC/theme/META-INF/json2_0/json.js"></script><script type="text/javascript" src="/BMC/theme/META-INF/prototype1_5/prototype.js"></script><script type="text/javascript" src="/BMC/theme/META-INF/com_sun_faces_ajax.js"></script><script type="text/javascript" src="/BMC/theme/META-INF/dojo1_0_1/dojo/dojo.js"></script><script type="text/javascript" src="/BMC/theme/META-INF/dojo1_0_1/dijit/dijit.js"></script><script type="text/javascript">dojo.registerModulePath("webui.suntheme", "/BMC/theme/com/sun/webui/jsf/suntheme4_1_1/javascript");</script><script type="text/javascript" src="/BMC/theme/com/sun/webui/jsf/suntheme4_1_1/javascript/webui-jsfx.js"></script><script type="text/javascript">webui.suntheme.bootstrap.init({"debug":false,"theme":{"locale":"en-US","prefix":"/BMC/theme","modulePath":"/com/sun/webui/jsf/suntheme4_1_1/javascript/theme","bundle":"suntheme","module":"webui.suntheme.theme"}});</script><link id="link1" rel="stylesheet" type="text/css" href="/BMC/resources/stylesheet.css" />I think the JK isapi_connector in IIS is preventing access to the META-INF path and the isapi_director log file says - "*+[emerg] HttpFilterProc::jk_isapi_plugin.c (1282): [BMC/theme/META-INF/json2_0/json.js] points to the web-inf or meta-inf directory. Somebody tries to hack into the site!!!+*". The same message is repeated for several more javascript files that are being served from under the META-INF path.
    Any help or advice in this matter will be greatly appreciated.
    Thanks!!!

    I managed to find a workaround. Thought i should share it with those who are faced with a similar issue.
    I found that a bug report had been placed in the past with Apache Dev. However, they had said that they would not modify their logic because the servlet container spec requires it (even though isapi_redirector is only a connector and not a container). They said that there is no way for the isapi_redirector to differentiate between /foo/WEB-INF when foo is a context and when foo is just a sub-directory of the ROOT web application. So, the general consensus was to err on the side of safety and risk blocking a few requests that are valid.
    However, this causes a serious issue for those using NetBeans JSF Visual Web Projects. Hence, I created my own flavour of isapi_redirector by modifying the code such that this check is not performed and leaving the onus of checking on Tomcat.
    For those who are interested, the simplest way to go about this would be to force the function uri_is_web_inf (in jk_isapi_plugin.c ) to always return FALSE.

  • How do I restrict the source trying to access a port?

    I have VoIP phones in my office and I am experiencing dozens of hacking attempts per day.  I received the following email from the company that I purchase service from:
    Hi ,
    Based on our research and experience with these type of calls, these are hacking attempts usually using a program called SIP Vicious or a variant. You can  check the link below about SIP Vicious.
    http://threatpost.com/hackers-pushing-sipvicious-voip-tools-malicious-attacks-08 3111/
    These attacks for the most part do not affect users behind our managed routers since we have security features in place to block them.
    The calls that the remote users are getting do not  traverse the Broadcorenetwork at all. Meaning even if the user put the phone on  DND or we try to block calls through the Web portal, calls will still go through because the call does not go through our Session Border Controller ( SBC ) .
    The call is directly hitting the IP of the remote users router (bypassing Broadcore completely) and scanning the ports for a SIP device which is the Polycom Phone. Once they get an answer back from the phone, the hacker  now has a target to attack. What they want to do is get the credentials for the user so they can authenticate a soft phone for example and make free calls.
    Unmanaged network /Router limits us of how we can block these calls  , however we have a suggestion which could help you eliminate these calls.
    What the remote user can do is to implement this policy . Allow UDP protocol on port 5060 but the only source should be west.broadcore.com.
    Since the remote user uses his/her own router, you might need help from their respective support team.
    Thank you,
    How do I set up the port mapping to only allow incoming traffic from the specified source west.broadcore.com?
    Also, is there some sort of documentation, manual, web site or book that covers what the settings of the Airport are?  In detail?  So, that I can learn for myself what is what and be able to answer my own questions such as:  Timed Access - Does this only apply to Wi-Fi or does it disable to whole router during the restricted period?
    Thanks in advance,
    Noa
    By the way I'm using the  Airport Express 802.11n Wi-Fi (2nd Generation), Firmware 7.6.4, Airport Utility 6.3.4 on my Mac or the latest version on my iPhone 6.

    What the remote user can do is to implement this policy . Allow UDP protocol on port 5060 but the only source should be west.broadcore.com.
    Unfortunately, Apple routers are quite simple, and do not have the features and settings that you would need to do this.
    However, if you are using a modem/router or gateway device with the AirPort Express, then you might be able to set up the modem/router to do what you need. What is the make and model number of the device that you likely call your "modem"?

  • When I try to open the HTML file "file:///C:/Users/DHeimann/Documents/JP Cohousing/Retreat agenda 2014.htm", the system attempts to access Gmail and hangs.

    I can open various most other *.htm or *.html files on my C drive without a problem. However, there are other HTML files on the drive that do have this problem when I try to open them.
    When I try to open the file in Internet Explorer rather than Firefox, I get a message that JavaScript is not enabled. However, I do have JavaScript enabled, and have just updated Java to Version 7, Update 51.

    One of the problems with saving web pages from complex dynamic sites like Gmail is that you may be saving the instructions for rendering the page rather than the actual content of the page. In that case, if you are logged out of your account or there is a cross-site security bar to pulling the needed data, then the saved page may not display correctly or at all. If a message is critical, it's a good idea to print or save the page to PDF or grab a screen shot to work around that problem.
    The message you're getting in Internet Explorer may be related to the fact that IE has different security zones with different restrictions. For example, sites in the Internet Zone normally can run JavaScript, and sites in the Restricted Sites list cannot. The local computer zone has much tighter security compared with the old IE6/XP days, and that may explain what you're seeing there.
    P.S. Browsers interpret JavaScript internally without using the Java plugin.

Maybe you are looking for