BSOD (BAD_POOL_HEADER) when scanning for Inventory

Hi All
I've set up a small testsite here.
It's a quite simple setup, with a few servers, a Zen10 CM server, and a few workstations.
It's all working quite nicely, but one of the machines does a BSOD (BAD_POOL_HEADER) when I ask it to do inventory. Taken from the event viewer it shows:
Error code 00000019, parameter1 00000020, parameter2 86ef6628, parameter3 86ef6740, parameter4 1a230001.
I have of course as a start, turned off inventory, but in the long run, that is of course not a solution, I would very much like to find out what's wrong.
The machine in question is an AMD Athlon X2 64 bit CPU, running 32 bit Windows XP sp3, with all the updates.
It has been used for testing all sorts of software, so it's for sure quite a mess registry / file wise.
Nevertheless it shouldn't BSOD the machine.
Just to make sure, I've exchanged the RAM, but it didn't change anything.
The Indexing service has also been turned of.
(That was the two typical messages I got from Google).

We've had the BAD_POOL_HEADER BSOD in combination with complex directory structures on NetWare servers (leading to paths longer than 255 letters) with Novell Client 4.9 SP2. SP5 fixed it.
Try analyzing the dump file. You should be able to see which process the blue screen triggers (in our case nwfs.sys).

Similar Messages

GX700 Crashes when scanning for TV channels!

Hi forum.
I've got a GX700 with TV-tuner. Everything else on the PC is working like a charm, but when scanning for TV-channels in DVBViewer Pro and CyberLink PowerCinema, the PC simply crashes, and a nice blue-screen error message appears. The Scanning always make it to 98 %, without finding a single channel, and then the crash occurs. I'm using Vista 64-bit.

Quote
and a nice blue-screen error message appears.
And says what? >>> Getting help with random restarts and Blue Screens <<<

MAX crashes when scanning for gpib instruments

MAX closes without comment when I attempt to scan for instruments with a tektronix TDS3014B scope attached. This problem does not occur with other instruments.
Attachments:
Capture.spy ‏60 KB
nireport.txt ‏2 KB

I've tried scanning for instruments with the TDS3014B being 1) the only instrument connected, 2) one of many instruments connected and 3) not being one of the instruments connected. The scan causes MAX to crash in cases 1 and 2 but succeeds in case 3. I tried scanning with the TDS3014B connected on different computers and MAX does not crash. I attached the ni reports for those computers. I do not have another TDS3014B available to try. When scanning case 2 some of the other intruments connected are the HP8920, Agilent E3632A and Agilent E8257C, but I don't think having other instruments connected matters since case 1 causes the crash also.
Attachments:
nireport_max_OK.txt ‏2 KB
nireport2_max_OK.txt ‏2 KB

Stuck interrupt when scanning for wireless networks (Athero chipset)

I'm working on getting wireless running on my Thinkpad T40 with an Atheros AR5211 a/b adapter. The ath5k module loads automatically, and the dmesg output seems to indicate that it is properly detecting the card:
% dmesg|grep ath
[ 4.767272] ath5k 0000:02:02.0: registered as 'phy0'
[ 5.042780] ath: EEPROM regdomain: 0x61
[ 5.042787] ath: EEPROM indicates we should expect a direct regpair map
[ 5.042793] ath: Country alpha2 being used: 00
[ 5.042796] ath: Regpair used: 0x61
[ 5.478542] ath5k: phy0: Atheros AR5211 chip found (MAC: 0x42, PHY: 0x30)
[ 5.478549] ath5k: phy0: RF5111 5GHz radio found (0x17)
[ 5.478553] ath5k: phy0: RF2111 2GHz radio found (0x23)
I brought the interface up using ip:
% ip link show wlan0
4: wlan0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN mode DEFAULT group default qlen 1000
link/ether [redacted] brd ff:ff:ff:ff:ff:ff
The trouble comes when I try to scan for wireless networks. I run "sudo iw dev wlan0 scan". At this point, the system becomes very sluggish, and the load average began to monotonically increase. The scan never completes; I left it for 15-20 minutes and cut it off when the load passed 3.5. The load average did not go down after iw was killed. Checking in top, the CPU was pretty evenly split between a kworker process and ksoftirqd, even with the scan terminated.
I've searched around, and while there are all manner of problems reported with getting various wireless configurations to work, no one seems to get tripped up at the scanning phase like this. Does anyone know of diagnostics I could try (or perhaps other scan tools?) to narrow down what is actually causing the CPU to get hammered?
Last edited by Gavster (2014-01-15 02:57:56)

I got a chance to play around with this a bit more, trying wireless_tools this time:
% sudo iwlist wlan0 scan
wlan0 Failed to read scan data : Resource temporarily unavailable
As before, the load average then continues to increase until the system becomes unusable. This would lead me to believe that I have a driver or kernel issue, since that would be the commonality between the two tools.
The other interesting output is this:
% dmesg|tail
[ 280.973316] ath5k: phy0: too many interrupts, giving up for now
[ 280.989985] ath5k: phy0: too many interrupts, giving up for now
[ 281.004548] ath5k: phy0: too many interrupts, giving up for now
[ 281.019983] ath5k: phy0: too many interrupts, giving up for now
[ 281.034543] ath5k: phy0: too many interrupts, giving up for now
[ 281.049984] ath5k: phy0: too many interrupts, giving up for now
[ 281.064543] ath5k: phy0: too many interrupts, giving up for now
[ 281.079983] ath5k: phy0: too many interrupts, giving up for now
[ 281.094544] ath5k: phy0: too many interrupts, giving up for now
[ 281.109122] ath5k: phy0: too many interrupts, giving up for now
Looking at longer tails, this message repeats many many times, interspersed with:
net_ratelimit: 321 callbacks suppressed
With various values for 321. Some interrupt getting stuck would make sense for why the load average blows up, but I really don't know how to fix that ...
I verified on the ath5k site (http://wireless.kernel.org/en/users/Dri … rted_Chips) that my chip is supported:
% lspci
02:02.0 Ethernet controller: Qualcomm Atheros AR5211 Wireless Network Adapter [AR5001X 802.11ab] (rev 01)
Any tips for what might cause a stuck interrupt like that?

Format and settings when scanning for album cover artwork?

When scanning pictures for use as album cover artwork, which format works best? Also, what settings are best: number of colors (millions or billions), and resolution in dpi?

Thanks for responding, Limnos. I get the the file-size trade-off.
I guess what i need to know now is which file formats are permitted, and more to the point, do any of them work better or worse than the others in iTunes? In particular, i see that the JPEG 2000 format is extremely efficient, but is there anything about it that makes it, or any of the other image formats, a poor choice for iTunes?

Error Code:22 when scanning for available WiFi-Networks using CoreWLAN

Hi ,
I use the following code to scan for Wi-Fi networks on Mac book pro , 10.6 and above OS
                              Class pc;
                              NSArray *interfaces;
                              framework = [NSBundle bundleWithPath: @"/System/Library/Frameworks/CoreWLAN.framework"];
                              if([framework load])
                        NSLog(@"Framework loaded");
else
                                        NSLog(@"Error, framework failed to load\nAborting.");
return NULL;
if ((pc = [framework classNamed:@"CWInterface"]))
interfaces = [pc supportedInterfaces];
self.interfaceName = [interfaces objectAtIndex:0];
   airportInterface = [[pc alloc] initWithInterfaceName:[interfaces objectAtIndex:0]];
NSDictionary *argsDict = [NSDictionary dictionaryWithObject:[NSNumber numberWithBool:YES] forKey:@"SCAN_MERGE"];
NSArray *scanResults=[airportInterface scanForNetworksWithParameters:argsDict error:&scanErr];
My test software will work fine for about 30 to 40 mins returning the scanned Wi-Fi networks
After 40 Minutes, i usually get an error stating
Error code: 22, Error domain com.apple.coreWLAN.error, Error userinfo: (null)
Can you please let me know the work around or fix for this solution.
Regards
Rakesh

Hi Mike,
We have had this problem. Please delete the change log table of the ODS in the QA or Prod system (whichever is the target for your transport request) and then reimport the transport request.
<i>
534
if generated ODS InfoSource,
| 535|* no PSA versioning possible |</i>
Hope this helps...

Photoshop CC gets stuck on scanning for plugins

Windows 8.1 i7 256Gb SSHD
Photoshop Creative Cloud newly updated
On clicking photoshop icon task manager show photoshop stuck in Background Process
doesn't move up to Apps
if photoshop later starts after many minutes then
it gets stuck for minutes on scanning for plugins
when scanning for plugins task manager shows that it is essentially idle
whereas LR opens immediately and shows CPU use up over 20%
PS CC still at zero
about 10 or 15 minutes later then PS finally wakes up
What is the problem with photoshop getting stuck on not starting only starting as a background process and then not scaning for plug ins until 5 or 10 minutes later?

A frequent reason for stalling Photoshop on start up, are bad font files, so I would think the same would be true with a corrupted filter or plugin.
CC handles third party plugins differently to older versions, and you can't point to a folder like you could with CS6 etc. This link might help
https://support.alienskin.com/hc/en-us/articles/200145325-Using-a-custom-plug-ins-folder-w ith-Photoshop-CC

I just downloaded itunes, and when i go to music there are two options. You can either go to the itunes store or scan for media, and when I click on scan for media it does nothing. Help?

I just downloaded itunes, and when i go to music there are two options. You can either go to the itunes store or scan for media, and when I click on scan for media it does nothing. Help? (I tried deleting itunes and re-installing it but apparently itunes was still on my computer so it asked me if I wanted to just check and see if there were any issues or missing software, so I did that but i still had the same problem.)

Hi jbserious,
Welcome to the Support Communities!
It doesn't sound like the iTunes software and its components installed completely. The article below will walk you through some troubleshooting steps. Is this your first time using iTunes, or do you have an iTunes library from another computer that you want to move to this one?
Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/ht1926
iTunes: How to move your music to a new computer
http://support.apple.com/kb/HT4527
Adding music and other content to iTunes
http://support.apple.com/kb/HT1473
Cheers,
- Judy

Tips for reducing moire when scanning magazines?

In the past, I've just accepted the annoying pattern when scanning magazine pages that I've designed for my portfolio, using my consumer grade scanner. I've tried different scanner exposure settings (highlights, midtones, shadows, gamma), but usually without much benefit, so I'm looking more at post-scan fixes. I have some one-of-kind pages that I want to archive before they discolor (Quark pdf originals no longer available) and I'm wondering if you have any secret tips you can pass on?
ps: I'm fully aware of copyright. These are pages I've designed for use in my portfolio.
PS CS4 / OS 10.5.8 / MacPro 2 x 2.26 GHz Quad-Core Intel Xeon/ HP Photosmart c4480 scanner

There are some tricks for this. One is to rotate the magazine exactly fifteen degrees on the scanner and scan at the highest optical resolution of the scanner. Straightening the image after scanning will often reduce the amount of moiré. Then, on the high res scan, you can Gaussian Blur the image slightly - maybe one to two pixels, then add noise, followed by a small amount of blur - maybe .3-.4 pixels. Now you can downsample the file to where you need it. Those steps should take card of most if not all of your moiré.
But seriously, if you're the designer and have all the files to produce the ad, I would print directly from that and not worry about scanning.

My files in itunes appears twice when i scan for media, why?

my files in itunes appears twice when i scan for media, why?

Do you use iTunes Match?
I presume you are referring to iTunes running on a computer. iTunes does not run on a mobile device (it is confusing but it is a completely different sort of application and is the iTunes Store App, not iTunes).

Cannot see image when scanning check for neteller OS X 10.10

I am trying to use my bank's electronic deposit app. When I scan the check I do not see the image and cannot submit it to the bank. So far I have to use my Windows PC to do this. Will HP provide full software for the MAC ever or must I keep using a PC forever so I can deposit my checks?

Hey there @iMACguy13!
Thanks for posting on the HP Forums!
I can see that when scanning cheques to your Mac running 10.10 your unable to see the image. I may be able to provide some helpful suggestions!
From what I can see there is no full feature software and drivers for the Photosmart C410a on Mac OSX 10.10. You should still be able to scan using the application in the Mac called Image Capture. Image Capture is located in the Application folder of your Mac. Using Image Capture your should see your scanner on the left side. It may be listed under shared. Once you select your scanner you should see settings on the right side for scanning. There is also an option to preview the scan before you save it.
Within Image Capture you can also change the DPI settings to increase the resolution of the image. This may help fix the quality issue!
Please post back and let me know how it goes!
Cbert
I work on behalf of HP.
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" at the bottom of this post to say “Thanks” for helping!

What is the ideal configuration when scanning photos for iMovie?

When scanning photos to use in iMovie, what is the best dpi resolution? 72 dpi, 100 dpi, 150 dpi, 300 dpi?
What is the best print size? Scan it at 8 inches, 10 inches, 12 inches?
When saving to jpg, what quality is best to save at? 8, 10, 12?
Any help would be appreciated!

DPI (dots per inch) are only used when printing and iMovie will only look at the file dimensions.
But scanning images takes a lot of time and you may want to use the same images in other software so you should make the settings appropriate for future printing.
Scan (always in "landscape mode") using settings appropriate for printing (300 dpi) and sized for the largest prints you may want to make. TIFF is much less compressed than JPEG. Bring these files in iPhoto and export them out as JPEG sized at 640X480 for use in iMovie.

SCCM 2012 Secondary site some client's are scan hardware inventory for more than 30 days

Hi,
In our SCCM 2012 environment we have secondary site configured which connected with 8500 computers, on those 5500 machines scanning hardware inventory and send latest inventory details to Secondary Site Management Point, but remaing 3000 machines are not
sending latest hardware inventory for more than 30 days. I verified clients log found it is generating report on inventory agent.log however it is not available with secondary site Management Point.
Are anyone experienced this issue, please share your thought how to fix this issue.
Thanks in advance.
Madhan

Yes i did verify but the client isn't listed on both log files. Also i couldn't open IIS log because of it size has more than 800MB. currently this site has connected with 8500 machines do you think these many clients are supported by secondary site server.
If you can't open the IIS log then how do you know that the Client's IP is not listed within them?
5000 is the max for a secondary site. You will need to secondary sites at this location.
http://technet.microsoft.com/en-us/library/gg682077.aspx#BKMK_SupConfigClientNumbers
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

WHY WHEN I OPEN UP iTUNES DOES IT HAVE TO SCAN FOR MUSIC THEN I LOSE ALMOST EVERY **** SONG?!?!?!?!?!?

Why the **** is iTunes 11 so ****? I like every bit of how it looks good and new options, the thing i despise, cringe, shout and get angry about is WHY WHEN I OPEN UP iTUNES DOES IT HAVE TO SCAN FOR MUSIC THEN I LOSE ALMOST EVERY **** SONG?!?!?!?!?!? It is far to annoying to have to re-enter all my albums and music, pictures, names... etc. etc. why can't it be the usual open iTunes and listen to my playlists?

From the now playing screen, bring up the scrubber bar(tap the screen):
A small icon that looks like two circular arrows is on the left side below the scrubbing bar. Tap this icon once to repeat the album. The icon will turn blue when repeat is activated. Tap the icon again to repeat the current song. The icon will change to show the number 1 inside a blue circle. Touch the icon a third time to cancel any repeat. The icon will turn white when it's deactivated.

TS1398 this didn't help me at all. out of the clear clue my iPad can't even scan for wireless networks. even when I type in my home wireless network name. my phone can connect to it but for whatever reason my iPad won't. nothing I've tried works. I'm ****

believe me I've tried EVERTHING and my iPad still 'can't scan for wireless networks'. it happened all of a sudden and is really really frustrating. I really don't want to have to drive 40 minutes to the nearest 'genius bar'. I'm about ready to break this thing over my knee. I've even tried the frig trick. it worked for about 30 seconds. and then? nothing. any non sarcastic suggestions?

believe me I've tried EVERTHING and my iPad still 'can't scan for wireless networks'. it happened all of a sudden and is really really frustrating. I really don't want to have to drive 40 minutes to the nearest 'genius bar'. I'm about ready to break this thing over my knee. I've even tried the frig trick. it worked for about 30 seconds. and then? nothing. any non sarcastic suggestions?

BSOD (BAD_POOL_HEADER) when scanning for Inventory

Similar Messages

Maybe you are looking for