BSOD Caused by connection.
When my brand new iPod touch is plugged into my computer [running on windows xp] I get the BSOD, also known as the Blue Screen Of Death.
I've heard of others having this problem and that it's most probably caused by the current iTunes, or firmware update on the touch itself.
Anyone help? Please?
Hi all,
I had a similar problem: iPod worked fine for 2 days and then started causing BSOD when I connected it (XP SP3).
Doing all the things in the KB did not solve my problem.
Eventually I found out that the iPod is causing a 'camera' device driver to be installed too.
Disabling this device seems to solve the problem.
(Device can be disabled after you start XP in safe mode)
Please let me know if this solves your problems as well.
Bert
PS: Apple, where did you hide this camera...
Message was edited by: Bert Janssen
Message was edited by: Bert Janssen
Similar Messages
-
Hi, I am trying to use "Remote Resources" on the current version of the Microsoft Remote Desktop for Android app, I can input the webfeed and it even shows the apps that I have configured on the server for "Remote App", sadly whenever
I try to load any of the RemoteApps, I receive an error stating " A problem with the system proxy caused the connection to fail. End of File".
I don't know what I can do to fix this, I've tried many things to no avail, also, normal Remote Desktop connections from the Microsoft Android app work flawlessly to the server.
The relevant log is the following:
[2014-Jan-09 04:40:54] RDP (0): ----- BEGIN ACTIVE CONNECTION -----
[2014-Jan-09 04:40:54] RDP (0): Final rdp configuration used: memory bookmark [
label
hostname DIAZSERVER
port 3389
loadbalanceinfo
ui.swapmousebutton false
remote.program ||ZWaveUtil
remote.workingdirectory
remote.name ZWave Adapter Utility
remote.args
rail true
soundmode 0
connect_to_console false
redirectsdcard true
performance_flags 134
arc.sessionid 0
anonymous_username
authentication_level 2
use_redirection_server_name false
username administrator
gateway [
host = DIAZSERVER
port = 443
bypass = false
connect info[
hostnames = [localhost]
gatewayHost = DIAZSERVER
gatewayPort = 443
routingToken = Cookie: mstshash=administrator
redirectionGUID =
proxyHost = 200.5.68.10
proxyPort = 8080
sessionId = -1
[2014-Jan-09 04:40:54] RDP (0): Using HttpConnect proxy at 200.5.68.10:8080
[2014-Jan-09 04:40:54] RDP (0): Using Basic Authentication with username ''
[2014-Jan-09 04:40:54] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
AsioEndpointContext (0): startup(): starting up down context
[2014-Jan-09 04:40:54] RDP (0): Resolved '200.5.68.10' to '200.5.68.10' using NameResolveMethod_DNS(1)
[2014-Jan-09 04:40:54] RDP (0): Resolved '200.5.68.10' to '200.5.68.10' using NameResolveMethod_DNS(1)
ASIOSocketAdapter (9): readSomething error. message: End of file. instance: 0x5d39d5c0
RpcOverHttp (9): Stream error in endpoint 0x5abbc170 : A problem with the system proxy caused the connection to fail: End of file
[2014-Jan-09 04:40:55] RDP (0): Error message: A problem with the system proxy caused the connection to fail: End of file
[2014-Jan-09 04:40:55] RDP (0): Error message: A problem with the system proxy caused the connection to fail: End of file
[2014-Jan-09 04:40:55] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
ASIOSocketAdapter (9): handleRead(): exception: Exception in file '/var/lib/jenkins/jobs/rc-android-app/workspace/rdp-layer/library/jni/librdp/private/httpendpoint.cpp' at line 489
User Message : Failed to read from channel: -1. instance: 0x5d39d5c0
[2014-Jan-09 04:40:55] RDP (0): Disconnect initiated by client
RpcOverHttp (9): Exception in endpoint 0x5abbc170 : Exception in file '/var/lib/jenkins/jobs/rc-android-app/workspace/rdp-layer/library/jni/librdp/private/httpendpoint.cpp' at line 489
User Message : A problem with the system proxy caused the connection to fail: Failed to read from channel: -1
[2014-Jan-09 04:40:55] RDP (0): Exception caught: Exception in file '/var/lib/jenkins/jobs/rc-android-app/workspace/rdp-layer/library/jni/librdp/private/httpendpoint.cpp' at line 489
User Message : A problem with the system proxy caused the connection to fail: Failed to read from channel: -1
[2014-Jan-09 04:40:55] RDP (0): Exception caught: Exception in file '/var/lib/jenkins/jobs/rc-android-app/workspace/rdp-layer/library/jni/librdp/private/httpendpoint.cpp' at line 489
User Message : A problem with the system proxy caused the connection to fail: Failed to read from channel: -1
AsioEndpointContext (0): shutdown(): shutting down context
AsioEndpointContext (0): shutdown(): context shut down
AsioEndpointContext (0): shutdown(): shutting down context
AsioEndpointContext (0): shutdown(): context shut down
[2014-Jan-09 04:40:57] RDP (0): ------ END ACTIVE CONNECTION ------My problem is that the "proxy" is the proxy set up by my 3G configuration so, I tried connecting to the remote resources through my work wifi and I get the following:
[2014-Jan-14 16:58:13] RDP (0): ----- BEGIN ACTIVE CONNECTION -----
[2014-Jan-14 16:58:13] RDP (0): Final rdp configuration used: memory bookmark [
label
hostname DIAZSERVER
port 3389
loadbalanceinfo
ui.swapmousebutton false
remote.program ||chrome
remote.workingdirectory
remote.name Google Chrome
remote.args
rail true
soundmode 0
connect_to_console false
redirectsdcard true
performance_flags 134
arc.sessionid 0
anonymous_username
authentication_level 2
use_redirection_server_name false
username Administrator
gateway [
host = DIAZSERVER
port = 443
bypass = false
connect info[
hostnames = [localhost]
gatewayHost = DIAZSERVER
gatewayPort = 443
routingToken = Cookie: mstshash=Administrator
redirectionGUID =
proxyHost =
proxyPort = 0
sessionId = -1
[2014-Jan-14 16:58:13] RDP (0): Not using any proxy
[2014-Jan-14 16:58:13] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
AsioEndpointContext (0): startup(): starting up down context
ASIOSocketAdapter (9): handleResolve(): boost error: Host not found. Please provide the fully-qualified name or the IP address of the host.. instance: 0x5d474090
RpcOverHttp (9): Stream error in endpoint 0x5d46b678 : Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
[2014-Jan-14 16:58:17] RDP (0): Error message: Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
[2014-Jan-14 16:58:17] RDP (0): Error message: Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
[2014-Jan-14 16:58:17] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
ASIOSocketAdapter (9): handleResolve(): boost error: Host not found. Please provide the fully-qualified name or the IP address of the host.. instance: 0x5d445158
RpcOverHttp (9): Stream error in endpoint 0x5d49fa30 : Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
[2014-Jan-14 16:58:17] RDP (0): Error message: Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
[2014-Jan-14 16:58:17] RDP (0): Disconnect initiated by client
[2014-Jan-14 16:58:17] RDP (0): Error message: Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
AsioEndpointContext (0): shutdown(): shutting down context
AsioEndpointContext (0): shutdown(): context shut down
AsioEndpointContext (0): shutdown(): shutting down context
AsioEndpointContext (0): shutdown(): context shut down
[2014-Jan-14 16:58:17] RDP (0): ------ END ACTIVE CONNECTION ------
Now, I know the host can be resolved because: if I connect to the same host but on a full remote desktop (as opposed to just RemoteApp on it) I have no trouble either through 3G OR through my work connection.
Moreover, I also tried directly inputting the IP as opposed to the web address of my server, I get the same error, that is the Remote Resources tab is able to access the feed (because it shows the available RemoteApps) but when I click an app it says it can't
find the Host, here's the log for the connection directly to the IP address/rdweb/feed/webfeed.aspx :
[2014-Jan-14 17:09:27] RDP (0): ----- BEGIN ACTIVE CONNECTION -----
[2014-Jan-14 17:09:27] RDP (0): Final rdp configuration used: memory bookmark [
label
hostname DIAZSERVER
port 3389
loadbalanceinfo
ui.swapmousebutton false
remote.program ||chrome
remote.workingdirectory
remote.name Google Chrome
remote.args
rail true
soundmode 0
connect_to_console false
redirectsdcard true
performance_flags 134
arc.sessionid 0
anonymous_username
authentication_level 2
use_redirection_server_name false
username administrator
gateway [
host = DIAZSERVER
port = 443
bypass = false
connect info[
hostnames = [localhost]
gatewayHost = DIAZSERVER
gatewayPort = 443
routingToken = Cookie: mstshash=administrator
redirectionGUID =
proxyHost =
proxyPort = 0
sessionId = -1
[2014-Jan-14 17:09:27] RDP (0): Not using any proxy
[2014-Jan-14 17:09:27] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
AsioEndpointContext (0): startup(): starting up down context
ASIOSocketAdapter (9): handleResolve(): boost error: Host not found. Please provide the fully-qualified name or the IP address of the host.. instance: 0x5d372f28
RpcOverHttp (9): Stream error in endpoint 0x5dd6b168 : Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
[2014-Jan-14 17:09:31] RDP (0): Error message: Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
[2014-Jan-14 17:09:31] RDP (0): Error message: Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
[2014-Jan-14 17:09:31] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
ASIOSocketAdapter (9): handleResolve(): boost error: Host not found. Please provide the fully-qualified name or the IP address of the host.. instance: 0x5d378de0
RpcOverHttp (9): Stream error in endpoint 0x5e9cc1f0 : Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
[2014-Jan-14 17:09:31] RDP (0): Error message: Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
[2014-Jan-14 17:09:31] RDP (0): Disconnect initiated by client
[2014-Jan-14 17:09:31] RDP (0): Error message: Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote PC, and then try again.
AsioEndpointContext (0): shutdown(): shutting down context
AsioEndpointContext (0): shutdown(): context shut down
AsioEndpointContext (0): shutdown(): shutting down context
AsioEndpointContext (0): shutdown(): context shut down
[2014-Jan-14 17:09:31] RDP (0): ------ END ACTIVE CONNECTION ------
I'm really puzzled here, I've tried checking if ports where open, and ports 443 and 3389 are wide open, I don't know what else it could be. -
what would cause adobe connect to freeze in a session for users, while the moderator session did not
HI rogerstam1
Is screen being shared at that time when addin freezes?
if yes if this coems again could you just stop screen share and try it again.
hope this helps. -
Oracle XML vaidation causes database connection lost.
Schema document:
<?xml version="1.0" encoding="UTF-8"?>
<xsd:schema xmlns:s="http://www.w3.org/2001/XMLSchema" xmlns:xsd="http://www.w3.org/2001/XMLSchema" elementFormDefault="qualified" attributeFormDefault="unqualified">
<xsd:annotation>
<xsd:documentation xml:lang="en">
</xsd:documentation>
</xsd:annotation>
<xsd:element name="BDDString" type="xsd:string"/>
</xsd:schema>
XML document:
<?xml version="1.0" encoding="UTF-8"?>
<BDDString><Path>USA</Path></BDDString>
Result http://apps.gotdotnet.com/xmltools/xsdvalidator/Default.aspx validation:
Validation error:
<?xml version="1.0" encoding="UTF-8"?>
<BDDString
Error at (2,14): The element 'BDDString' has invalid child element 'Path'. An error occurred at , (2, 14).
Error at (2,14): The 'Path' element is not declared. An error occurred at , (2, 14).
<Path>USA</Path></BDDString>ORACLE validation:
Declare
xmlObj XMLType;
begin
xmlObj := XMLType('<?xml version="1.0" encoding="UTF-8"?><BDDString><Path>USA</Path></BDDString>',
'cb78db306e061027a7c4b02b1a84d6fb');
XMLType.schemavalidate(xmlObj);
end;
Result: Oracle XML vaidation causes database connection lost!
*** SCRIPT START : Session:M1GLOBAL_DEV15@MATRIX(5) 3-мар-2005 14:05:41 ***
Start SQL Editor Execution ...
Processing ...
xmlObj := XMLType('<?xml version="1.0" encoding="UTF-8"?>
ORA-03113: end-of-file on communication channel
*** SCRIPT END : Session:M1GLOBAL_DEV15@MATRIX(5) 3-мар-2005 14:08:02 ***
End SQL Editor Execution
Task "SQL Editor Execution": Operation aborted
SQL Editor Execution terminated with errors
Task "SQL Editor Execution" in DoTerminate(): Session Manager: No connection to M1GLOBAL_DEV15@MATRIX
Help!
Question:
1)Why Oracle validation incorrectly works?
2)How it to correct?Hi,
1- what is the Reports version being used?
2- What is the error you are getting?
3- Have you tried to enable reports trace and see what is happening in trace file?
Thanks, Roberto -
Where is the form / forum to submit BSOD caused by Photoshop CS4 to the technical support ?
But if it will make you feel better, the bug report form is here:
http://www.adobe.com/cfusion/mmform/index.cfm?name=wishform
As Bob said, though, this is generally a hardware/driver issue of some sort. I've just seen a case where some malware was causing BSOD when trying to run or install a scanner. When I got the malware off the machine the BSOD problem was instantly cured. -
Just installed Premiere Elements, tring to register I'm getting this message:Either your computer is offline or the clock on your computer is set incorrectly, causing a connection error. An Internet connection is required. Please connect to the Internet or adjust your clock and try again.". Have tried all suggested steps, no problem registering PSE one month ago. Win 7 system. Is there a solution?
Laurenceb70597335 you can find details regarding the activation process at Activation & Deactivation Help. This includes details on how to activate and deactivate Premiere Elements.
-
Web Acceleration Client Error (513) - Internal Error
The Web Acceleration Client detected an internal error which caused the connection between the Web Acceleration Client and Web Acceleration Server to be broken. Retrying the web page may correct the problem.
I get this error continuously when working in the ancestry.com website. I have to reload the page on almost every search I do on that website. This is the ONLY website that I get this error message on, can work continuously for several hours on other websites and never get this message. I've talked to the people at Ancestry.com support and they made 2 recommendations: turn of antivirus (did not help) or switch to another web browser. I tried both IE 11 and Chrome Version 31.0.1650.63 m and I did not have the problem with either of those 2 browsers getting this error.
Is there a problem with how Firefox and ancestry.com are communicating with each other?Hello byron.lewis, many site issues can be caused by corrupt cookies or cache. In order to try to fix these problems, the first step is to clear both cookies and the cache.
Note: ''This will temporarily log you out of all sites you're logged in to.''
To clear cache and cookies do the following:
#Go to Firefox > History > Clear recent history or (if no Firefox button is shown) go to Tools > Clear recent history.
#Under "Time range to clear", select "Everything".
#Now, click the arrow next to Details to toggle the Details list active.
#From the details list, check ''Cache'' and ''Cookies'' and uncheck everything else.
#Now click the ''Clear now'' button.
Further information can be found in the [[Clear your cache, history and other personal information in Firefox]] article.
Did this fix your problems? Please report back to us!
Thank you. -
ACE Module Cookie Parsing causes Reset Connection
I am trying to upgrade my ACE Modules from A2(1.3) to A2(3.2) . Unfortunately, the cookie parsing breaks when there are illegal characters and causes a connection reset (RST) when there is an invalid cookie, but only on code later than A2(1.3).
The cookie in question is being passed by a third party so making them change the cookie is not necessarily do-able. The cookie has the following value:
Cookie: CurrentUser={"UserKey":{"Key":"anonymous"},"LastUpdated":"10/13/2010 1:35:52 PM"}
We are using the following parameter map:
parameter-map type http CASE_PARAM
case-insensitive
persistence-rebalance
set header-maxparse-length 20480
length-exceed continue
On the older code, the request is passed on to the server.
Is there a setting similar to "length-exceed continue" that I can give the ACE to tell it to ignore cookies it cannot parse?HTTP inspection is not enabled.
Did you mean adding a class-default to the policy-map?
Adding it to the policy-map does make it match the class-default. Unfortunately, cookie parse errors result in the inability to parse both the cookie and the host header as well. It seems that rather than just failing to parse the cookie and being unable to do sticky matching - it completely fails the entire header parsing.
Here's our setup:
rserver host test1
ip address 192.168.1.101
inservice
rserver host test2
ip address 192.168.1.102
inservice
rserver host test3
ip address 192.168.1.103
inservice
rserver host test4
ip address 192.168.1.104
inservice
serverfarm host auto
probe HTTP-diagnostic
rserver test1
inservice
rserver test2
inservice
serverfarm host news
probe HTTP-diagnostic
rserver test3
inservice
rserver test4
inservice
sticky http-cookie autoCookie auto-cookie
cookie insert browser-expire
replicate sticky
serverfarm auto
sticky http-cookie newsCookie news-cookie
cookie insert browser-expire
replicate sticky
serverfarm news
class-map type http loadbalance match-any auto
2 match http header Host header-value "www.auto.local"
3 match http header Host header-value "auto.local"
class-map type http loadbalance match-any news
2 match http header Host header-value "www.news.local"
3 match http header Host header-value "news.local"
class-map match-all prod_VIP
2 match virtual-address XXX.XXX.XXX.XXX tcp eq www
policy-map type loadbalance first-match prod_POLICY
class auto
sticky-serverfarm auto-cookie
class news
sticky-serverfarm news-cookie
class class-default
sticky-serverfarm auto-cookie
policy-map multi-match aggregate-slb-apps
class prod_VIP
loadbalance vip inservice
loadbalance policy prod_POLICY
loadbalance vip icmp-reply active
loadbalance vip advertise
appl-parameter http advanced-options CASE_PARAM -
I cannot seem to sign in because my "computer if offline...or the clock on your computer us set incorrectly causing a connection error..." Neither is true. How do I fix this?
spunoney
What version of Premiere Elements and on what computer operating system is it running?
Premiere Elements 12 by any chance?
Please review what I ran into in this regard and what the solution turned out to be for me.
ATR Premiere Elements Troubleshooting: PE12: Sign In Failure (Connect to Internet or Fix Computer Clock)
We will be watching for your results even if version other than 12 is involved.
Thank you.
ATR -
Bt signal extender causing limited connection
Hi,
I recently bought a bt dual band wifi extender 600 and it did the job perfectly for a few weeks but it is now causing 'limited connectivity' issues for all devices that try to connect through it. It is obviously the extender that is the issues as if i turn it off i get connection through the router fine when i am in the same room (as long as i am in range of course), i was wondering if this is likely to be a fault with the extender or if there are some settings i can try that may solve the problem. I have tried resetting nd moving the extender which seems to work for an hour or so but then the problem occurs again.
Any advice would be appreciated.
Thanks
AdamHave you tried changing the wireless channel on the home hub, try channel 13?
There may be interference on the channel you are using at the moment, causing the extender to lose connection.
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones. -
Randomly BSODs caused by ntoskrnl.exe
I have random BSODs, this is the dump file... any ideas? I tried to update all drivers, but I solved nothing.
Microsoft (R) Windows Debugger Version 6.3.9600.17029 X86
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Program Files (x86)\Windows Kits\8.1\Debuggers\x86\061114-29937-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available
Error: Attempts to access '061114-29937-01.dmp' failed: 0x0 - The operation completed successfully.
************* Symbol Path validation summary **************
Response Time (ms) Location
Error 061114-29937-01.dmp
Symbol search path is: 061114-29937-01.dmp
Executable search path is:
Unable to load image \SystemRoot\system32\ntoskrnl.exe, Win32 error 0n2
*** WARNING: Unable to verify timestamp for ntoskrnl.exe
*** ERROR: Module load completed but symbols could not be loaded for ntoskrnl.exe
Windows 8 Kernel Version 9600 MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 9600.17085.amd64fre.winblue_gdr.140330-1035
Machine Name:
Kernel base = 0xfffff800`6e28e000 PsLoadedModuleList = 0xfffff800`6e5582d0
Debug session time: Wed Jun 11 20:29:12.062 2014 (UTC + 2:00)
System Uptime: 0 days 0:22:21.219
Unable to load image \SystemRoot\system32\ntoskrnl.exe, Win32 error 0n2
*** WARNING: Unable to verify timestamp for ntoskrnl.exe
*** ERROR: Module load completed but symbols could not be loaded for ntoskrnl.exe
Loading Kernel Symbols
Loading User Symbols
Loading unloaded module list
************* Symbol Loading Error Summary **************
Module name Error
ntoskrnl The system cannot find the file specified
You can troubleshoot most symbol related issues by turning on symbol loading diagnostics (!sym noisy) and repeating the command that caused symbols to be loaded.
You should also verify that your symbol search path (.sympath) is correct.
* Bugcheck Analysis
Use !analyze -v to get detailed debugging information.
BugCheck 133, {1, 1e00, 0, 0}
***** Kernel symbols are WRONG. Please fix symbols to do analysis.
*** Either you specified an unqualified symbol, or your debugger ***
*** doesn't have full symbol information. Unqualified symbol ***
*** resolution is turned off by default. Please either specify a ***
*** fully qualified symbol module!symbolname, or enable resolution ***
*** of unqualified symbols by typing ".symopt- 100". Note that ***
*** enabling unqualified symbol resolution with network symbol ***
*** server shares in the symbol path may cause the debugger to ***
*** appear to hang for long periods of time when an incorrect ***
*** symbol name is typed or the network symbol server is down. ***
*** For some commands to work properly, your symbol path ***
*** must point to .pdb files that have full type information. ***
*** Certain .pdb files (such as the public OS symbols) do not ***
*** contain the required information. Contact the group that ***
*** provided you with these symbols if you need this command to ***
*** work.
*** Type referenced: nt!_KPRCB
5 times more...
*** Either you specified an unqualified symbol, or your debugger ***
*** doesn't have full symbol information. Unqualified symbol ***
*** resolution is turned off by default. Please either specify a ***
*** fully qualified symbol module!symbolname, or enable resolution ***
*** of unqualified symbols by typing ".symopt- 100". Note that ***
*** enabling unqualified symbol resolution with network symbol ***
*** server shares in the symbol path may cause the debugger to ***
*** appear to hang for long periods of time when an incorrect ***
*** symbol name is typed or the network symbol server is down. ***
*** For some commands to work properly, your symbol path ***
*** must point to .pdb files that have full type information. ***
*** Certain .pdb files (such as the public OS symbols) do not ***
*** contain the required information. Contact the group that ***
*** provided you with these symbols if you need this command to ***
*** work.
*** Type referenced: nt!_KPRCB
Probably caused by : ntoskrnl.exe ( nt+153fa0 )
Followup: MachineOwner
Systeminfo:
OS Name: Microsoft Windows 8.1 Pro
OS Version: 6.3.9600 N/A Build 9600
OS Manufacturer: Microsoft Corporation
OS Configuration: Standalone Workstation
OS Build Type: Multiprocessor Free
Original Install Date: 30/10/2013, 13:43:05
System Boot Time: 11/06/2014, 20:29:52
System Manufacturer: TOSHIBA
System Model: Satellite L500
System Type: x64-based PC
Processor(s): 1 Processor(s) Installed.
[01]: Intel64 Family 6 Model 37 Stepping 2 GenuineIntel ~2261 Mhz
BIOS Version: TOSHIBA 2.10, 17/05/2011
Windows Directory: C:\WINDOWS
System Directory: C:\WINDOWS\system32
Boot Device: \Device\HarddiskVolume2
Total Physical Memory: 3.958 MB
Available Physical Memory: 1.792 MB
Virtual Memory: Max Size: 7.926 MB
Virtual Memory: Available: 5.492 MB
Virtual Memory: In Use: 2.434 MB
Page File Location(s): C:\pagefile.sys
Domain: WORKGROUP
Logon Server:
\\MicrosoftAccount
Hotfix(s): 56 Hotfix(s) Installed.
[01]: KB2899189_Microsoft-Windows-CameraCodec-Package
[02]: KB2843630
[03]: KB2868626
[04]: KB2883200
[05]: KB2887595
[06]: KB2889543
[07]: KB2891214
[08]: KB2893294
[09]: KB2894029
[10]: KB2894179
[11]: KB2898868
[12]: KB2900986
[13]: KB2901125
[14]: KB2901128
[15]: KB2903939
[16]: KB2904440
[17]: KB2911106
[18]: KB2912390
[19]: KB2913152
[20]: KB2916036
[21]: KB2919355
[22]: KB2919394
[23]: KB2919442
[24]: KB2920189
[25]: KB2923528
[26]: KB2923768
[27]: KB2926765
[28]: KB2928680
[29]: KB2931358
[30]: KB2931366
[31]: KB2939153
[32]: KB2939576
[33]: KB2950153
[34]: KB2953522
[35]: KB2954879
[36]: KB2955164
[37]: KB2956575
[38]: KB2957151
[39]: KB2957189
[40]: KB2957689
[41]: KB2958262
[42]: KB2959977
[43]: KB2961908
[44]: KB2962140
[45]: KB2964718
[46]: KB2964736
[47]: KB2965065
[48]: KB2965142
[49]: KB2965500
[50]: KB2965699
[51]: KB2965788
[52]: KB2966072
[53]: KB2966407
[54]: KB2966804
[55]: KB2969817
[56]: KB976002
Network Card(s): 10 NIC(s) Installed.
[01]: Realtek PCIe FE Family Controller
Connection Name: Ethernet
DHCP Enabled: Yes
DHCP Server: N/A
IP address(es)
[02]: Realtek RTL8191SE Wireless LAN 802.11n PCI-E NIC
Connection Name: Wi-Fi
Status: Hardware
not present
[03]: Hyper-V Virtual Ethernet Adapter
Connection Name: Ethernet 6
Status: Media
disconnected
[04]: Hyper-V Virtual Ethernet Adapter
Connection Name: Ethernet 3
Status: Media
disconnected
[05]: Hyper-V Virtual Ethernet Adapter
Connection Name: Ethernet 5
DHCP Enabled: Yes
DHCP Server: 192.168.1.1
IP address(es)
[01]: 192.168.1.129
[02]: fe80::1513:f368:3c1e:c173
[06]: Hyper-V Virtual Ethernet Adapter
Connection Name: Ethernet 4
DHCP Enabled: No
IP address(es)
[01]: 169.254.80.80
[02]: fe80::4892:9cb3:7a80:2057
[07]: VMware Virtual Ethernet Adapter for VMnet1
Connection Name: VMware Network Adapter VMnet1
DHCP Enabled: No
IP address(es)
[01]: 192.168.223.1
[02]: fe80::a11c:f4d5:c02f:9fcf
[08]: VMware Virtual Ethernet Adapter for VMnet8
Connection Name: VMware Network Adapter VMnet8
DHCP Enabled: No
IP address(es)
[01]: 192.168.132.1
[02]: fe80::fc9a:9075:a71e:776c
[09]: TAP-Windows Adapter V9
Connection Name: Local Area Connection 3
Status: Media
disconnected
[10]: Hyper-V Virtual Ethernet Adapter
Connection Name: vEthernet (TAP-Windows Adapter V9 Virtual Switch)
Status: Media
disconnected
Hyper-V Requirements: A hypervisor has been detected. Features required for Hyper-V will not be displayed.Hi,
In order to assist you, we will need the .DMP files to analyze what exactly occurred at the time of the crash, etc.
If you don't know where .DMP files are located, here's how to get to them:
1. Navigate to the %systemroot%\Minidump folder.
2. Copy any and all DMP files in the Minidump folder to your Desktop and then zip up these files.
3. Upload the zip containing the .DMP files to Onedrive or a hosting site of your choice and paste in your reply. Preferred sites: Onedrive, Mediafire, Dropbox, etc. Nothing with wait-timers, download managers, etc.
4 (optional): The type of .DMP files located in the Minidump folder are known as Small Memory Dumps. In %systemroot% there will be what is known as a Kernel-Dump (if your system is set to generate). It is labeled MEMORY.DMP. The difference
between Small Memory Dumps and Kernel-Dumps in the simplest definition is a Kernel-Dump contains
much more information at the time of the crash, therefore allowing further debugging of your issue. If your upload speed permits it, and you aren't going against any strict bandwidth and/or usage caps, etc, the Kernel-Dump is the best
choice. Do note that Kernel-Dumps are much larger in size due to containing much more info, which is why I mentioned upload speed, etc.
If you are going to use Onedrive but don't know how to upload to it, please visit the following:
Upload photos and files to Onedrive.
After doing that, to learn how to share the link to the file if you are unaware, please visit the following link -
Share files and folders and change permissions and view 'Get a link'.
Please note that any "cleaner" programs such as TuneUpUtilities, CCleaner, etc, by default will delete .DMP files upon use. With this said, if you've run such software, you will need to allow the system to crash once again to generate a crash dump.
If your computer is not generating .DMP files, please do the following:
1. Start > type %systemroot% which should show the Windows folder, click on it. Once inside that folder, ensure there is a Minidump folder created. If not, CTRL-SHIFT-N to make a New Folder and name it Minidump.
2. Windows key + Pause key. This should bring up System. Click Advanced System Settings on the left > Advanced > Performance > Settings > Advanced > Ensure there's a check-mark for 'Automatically manage paging file size for all
drives'.
3. Windows key + Pause key. This should bring up System. Click Advanced System Settings on the left > Advanced > Startup and Recovery > Settings > System Failure > ensure there is a check mark next to 'Write an event to the system
log'.
Ensure Small Memory Dump is selected and ensure the path is %systemroot%\Minidump.
4. Double check that the WERS is ENABLED:
Start > Search > type services.msc > Under the name tab, find Windows Error Reporting Service > If the status of the service is not Started then right click it and select Start. Also ensure that under Startup Type it is set to Automatic rather than
Manual. You can do this by right clicking it, selecting properties, and under General selecting startup type to 'Automatic', and then click Apply.
If you cannot get into normal mode to do any of this, please do this via Safe Mode.
Regards,
Patrick
“Be kind whenever possible. It is always possible.” - Dalai Lama -
Home Hub 3/USB HDD causing internet connection to ...
Hi Guys,
I've been using a Home Hub 3 for a couple of years without any real problems. I recently decided to plug a USB HDD into the hubs usb port to act as shared storage on the network. I initially tried using an unpowered portable HDD which failed to work (I've since found out that the port does not have the power to power these devices).
I then tried a powered HDD which worked well and I was able to map to my network. However with in 24 hours I started noticing very frequent intermintant dropping of my internet connection. Through elimination I have isolated the cause to the USB drive. On removing and powering the drive the internet connection returns to being stable with no problems.
To test if it was just a fault caused by that particular USB drive I installed a USB flash drive (I have read that the port outputs enough power for a simple thumb drive) to see if the problem was recreated. Again the drive was recognised and I mappped it to the network sucessfully. However the intermitant problem has again become apparent. It has again also been corrected by removing the drive from the home hub.
The outages seem only to be with the internet connection. The wireless network with in the home remains up and running without interfernce. The outages are all for several seconds before self correcting and can happen almost continually making the web virtually unusable. For example it has taken me 5 or 6 attempts to post this message.
Any help on the cause of this problem and solutions would be greatly appreciated. I'd really like to avoid buying a NAS etc if unnecessary.
Many Thanks,
Jeffnickbailey_co_uk wrote:
...HDD needs to be formatted in FAT32...
Hi Nick,
Thanks for that info, and the above probably explains why it didn't work with the drive I tried it on - I'm pretty sure I formatted the one I tried to NTFS - I shall have to test it with a thumb drive.
Also, if you're looking at going down the NAS route, I've also been looking into getting a NAS and have had Netgear recommended to me - I know they're a good manufacturer, and from what I've seen it looks like you get pro-level features (such as RAID 5 (improved error correction/redundancy (for models with 3 or more drive bays)), hot swap (so you can swap out a dead drive without switching the unit off), and so on) at much closer to consumer-level prices - not 100% sure if they do one with FTP/web access, but I'd be surprised if they didn't.
Worth shopping around - there's a lot of alternatives on the market these days. -
BSOD caused by e22win7x64.sys
Hey all,
recently I have some issues related with e22win7x64.sys. I believe this BSOD is caused by Killer network manager.
I have checked all possible solutions like uninstall Killer network, and only install the drivers.
Unfortunately, it doesn't help me much. I still have BSOD problems.
Does anyone know if there exist another network adapter that can replace Killer network?
My motherboard is X99S Gaming 9 ACK
Memorary: G.SKILL Ripjaws 4 series 32GB (4 x 8GB) 288-Pin DDR4 SDRAM DDR4 2666
GPU: MSI GTX 980 GAMING 4G GeForce GTX 980 4GB
CPU: I7-5960Xwhich killed driver version you are using?
-
AppM File Passivation SQL92 Flavor for DB2 and causes Pool connection Leaks
I am porting an ADF application to WebSphere and DB2 and noticed AM passivation goes from file to database. I have bc4j setup to use file passivation. When this happens I am noticing Connection are not being returned to pool. Has anyone experienced these 2 issues (Connection leaks and AM passivation to database)
bc4j settings below are in place.
-Djbo.doconnectionpooling=true
-Djbo.txn.disconnect_level=1
ADF Version: 11.1.1.59.23 ::: JDEVADF_11.1.1.4.0_GENERIC_101227.1736.5923
Server Info: IBM WebSphere Application Server/7.0
Host Operating System is AIX, version 7.1
Java version = JRE 1.6.0 IBM J9 2.4 AIX ppc64-64 jvmap6460sr9-20110624_85526 (JIT enabled, AOT enabled)
J9VM - 20110624_085526
JIT - r9_20101028_17488ifx17
GC - 20101027_AA_CMPRSS, Java Compiler = j9jit24, Java VM name = IBM J9 VM
BC4J is configured to perform file passivation instead of database. The temp files (BC59c10e3cBCD) are being created, but the application occasionally passivates to database.
ConsoleDiagno C Establish database connection
3 oracle.jbo.server.DBTransactionImpl establishNewConnection [15306] Before getNativeJdbcConnection='com.ibm.ws.rsadapter.jdbc.WSJccSQLJConnection
3 oracle.jbo.server.DBTransactionImpl establishNewConnection [15307] After getNativeJdbcConnection='com.ibm.db2.jcc.am.gf
3 oracle.jbo.pcoll.JDBCPersistManager handleControlTableExists [15308] **createControlTable** tabname=PCOLL_CONTROL already exists
3 oracle.jbo.pcoll.JDBCPersistManager holdTableName [15309] **holdTableName** tabName=PS_IDMKRAppMod locked in controltab
3 oracle.jbo.pcoll.PCollManager resolveName [15310] **PCollManager.resolveName** tabName=PS_IDMKRAppMod
3 oracle.jbo.server.DBTransactionImpl closeTransaction [15311] *** closing jdbc connection now **** (com.ibm.db2.jcc.am.gf@4cb14cb1)Yes there are nested AMs in this case. I have a SQL92 flavor with Type Map set to Java, and running against a DB2 database. I have used reference site
http://www.oracle.com/technetwork/developer-tools/jdev/multidatabaseapp-085183.html
to properly configure my projects and setting and jbo options. What I am looking for is verification on the correct setting when this combination is used. I have dumped the runtime setting below. Are there any obvious problems below that may cause this behavior?
[1135] {{ begin Loading BC4J properties
[1136] -----------------------------------------------------------
[1137] BC4J Property jbo.default.language='en' -->(MetaObjectManager) from System Default
[1138] BC4J Property jbo.default.country='US' -->(MetaObjectManager) from System Default
[1139] Skipping empty Property jbo.default.locale.variant from System Default
[1140] BC4J Property DeployPlatform='LOCAL' -->(SessionImpl) from Client Environment
[1141] Skipping empty Property ConnectionMode from System Default
[1142] Skipping empty Property HostName from System Default
[1143] Skipping empty Property ConnectionPort from System Default
[1144] BC4J Property jbo.locking.mode='optimistic' -->(MetaObjectManager) from Client Environment
[1145] BC4J Property jbo.txn.disconnect_level='1' -->(SessionImpl) from System Property
[1146] Skipping empty Property ApplicationPath from System Default
[1147] BC4J Property AppModuleJndiName='oracle.documaker.idocumaker.model.shared.app.IDMKRAppModuleAM' -->(SessionImpl) from Client Environment
[1148] Skipping empty Property java.naming.security.principal from System Default
[1149] Skipping empty Property java.naming.security.credentials from System Default
[1150] Skipping empty Property jbo.user.principal from System Default
[1151] BC4J Property jbo.simulate.remote='false' -->(SessionImpl) from System Default
[1152] BC4J Property jbo.security.context='oracle.security.jazn' -->(MetaObjectManager) from System Default
[1153] Skipping empty Property jbo.object.marshaller from System Default
[1154] BC4J Property jbo.use.pers.coll='true' -->(SessionImpl) from Client Environment
[1155] BC4J Property jbo.pers.max.rows.per.node='70' -->(SessionImpl) from System Default
[1156] BC4J Property jbo.pers.max.active.nodes='30' -->(SessionImpl) from System Default
[1157] BC4J Property jbo.validation.threshold='10' -->(SessionImpl) from System Default
[1158] BC4J Property jbo.sparse.array.threshold='20' -->(SessionImpl) from System Default
[1159] BC4J Property jbo.pcoll.mgr='oracle.jbo.pcoll.pmgr.DB2PersistManager' -->(SessionImpl) from System Property
[1160] BC4J Property jbo.txn_table_name='PS_TXN' -->(SessionImpl) from System Default
[1161] BC4J Property jbo.txn_seq_name='PS_TXN_seq' -->(SessionImpl) from System Default
[1162] BC4J Property jbo.txn_seq_inc='50' -->(SessionImpl) from System Default
[1163] BC4J Property jbo.control_table_name='PCOLL_CONTROL' -->(MetaObjectManager) from System Default
[1164] BC4J Property jbo.stringmanager.factory.class='use_default' -->(SessionImpl) from System Default
[1165] BC4J Property jbo.domain.date.suppress_zero_time='true' -->(MetaObjectManager) from System Default
[1166] BC4J Property jbo.domain.bind_sql_date='true' -->(MetaObjectManager) from System Default
[1167] BC4J Property jbo.domain.string.as.bytes.for.raw='false' -->(MetaObjectManager) from System Default
[1168] BC4J Property jbo.fetch.mode='AS.NEEDED' -->(MetaObjectManager) from System Default
[1169] BC4J Property jbo.323.compatible='false' -->(MetaObjectManager) from System Default
[1170] BC4J Property jbo.903.compatible='false' -->(MetaObjectManager) from System Default
[1171] Skipping empty Property JBODynamicObjectsPackage from System Default
[1172] BC4J Property MetaObjectContextFactory='oracle.jbo.mom.xml.DefaultMomContextFactory' -->(MetaObjectManager) from System Default
[1173] BC4J Property jbo.load.components.lazily='false' -->(MetaObjectManager) from System Default
[1174] BC4J Property MetaObjectContext='oracle.jbo.mom.xml.XMLContextImpl' -->(MetaObjectManager) from System Default
[1175] BC4J Property java.naming.factory.initial='oracle.jbo.common.JboInitialContextFactory' -->(SessionImpl) from Client Environment
[1176] BC4J Property IsLazyLoadingTrue='true' -->(MetaObjectManager) from /oracle/jbo/server/jboserver.properties resource
[1177] BC4J Property oracle.jbo.usemds='true' -->(MetaObjectManager) from System Default
[1178] BC4J Property oracle.adfm.usemds='true' -->(MetaObjectManager) from System Default
[1179] BC4J Property ActivateSharedDataHandle='false' -->(MetaObjectManager) from System Default
[1180] Skipping empty Property HandleName from System Default
[1181] Skipping empty Property Factory-Substitution-List from System Default
[1182] BC4J Property jbo.project='oracle.documaker.idocumaker.model.SQL92Model' -->(Configuration) from Client Environment
[1183] BC4J Property jbo.max.cursors='50' -->(MetaObjectManager) from System Default
[1184] WARNING: Property jbo.dofailoverset to null
[1185] Skipping empty Property jbo.dofailover from null
[1186] WARNING: Property jbo.envinfoproviderset to null
[1187] Skipping empty Property jbo.envinfoprovider from null
[1188] Skipping empty Property jbo.rowid_am_conn_name from System Default
[1189] BC4J Property jbo.rowid_am_datasource_name='jdbc/xxxxxxx' -->(MetaObjectManager) from Client Environment
[1190] WARNING: Property jbo.ampool.writecookietoclientset to null
[1191] Skipping empty Property jbo.ampool.writecookietoclient from null
[1192] BC4J Property jbo.doconnectionpooling='true' -->(Configuration) from System Property
[1193] WARNING: Property jbo.recyclethresholdset to null
[1194] Skipping empty Property jbo.recyclethreshold from null
[1195] WARNING: Property jbo.ampool.dynamicjdbccredentialsset to null
[1196] Skipping empty Property jbo.ampool.dynamicjdbccredentials from null
[1197] BC4J Property jbo.ampool.resetnontransactionalstate='true' -->(SessionImpl) from System Default
[1198] WARNING: Property jbo.ampool.sessioncookiefactoryclassset to null
[1199] Skipping empty Property jbo.ampool.sessioncookiefactoryclass from null
[1200] WARNING: Property jbo.ampool.connectionstrategyclassset to null
[1201] Skipping empty Property jbo.ampool.connectionstrategyclass from null
[1202] WARNING: Property jbo.ampool.maxpoolsizeset to null
[1203] Skipping empty Property jbo.ampool.maxpoolsize from null
[1204] WARNING: Property jbo.ampool.initpoolsizeset to null
[1205] Skipping empty Property jbo.ampool.initpoolsize from null
[1206] WARNING: Property jbo.ampool.monitorsleepintervalset to null
[1207] Skipping empty Property jbo.ampool.monitorsleepinterval from null
[1208] WARNING: Property jbo.ampool.minavailablesizeset to null
[1209] Skipping empty Property jbo.ampool.minavailablesize from null
[1210] WARNING: Property jbo.ampool.maxavailablesizeset to null
[1211] Skipping empty Property jbo.ampool.maxavailablesize from null
[1212] WARNING: Property jbo.ampool.maxinactiveageset to null
[1213] Skipping empty Property jbo.ampool.maxinactiveage from null
[1214] WARNING: Property jbo.ampool.timetoliveset to null
[1215] Skipping empty Property jbo.ampool.timetolive from null
[1216] WARNING: Property jbo.ampool.doampoolingset to null
[1217] Skipping empty Property jbo.ampool.doampooling from null
[1218] WARNING: Property jbo.ampool.issupportspassivationset to null
[1219] Skipping empty Property jbo.ampool.issupportspassivation from null
[1220] BC4J Property jbo.ampool.isuseexclusive='true' -->(SessionImpl) from System Default
[1221] BC4J Property jbo.passivationstore='file' -->(MetaObjectManager) from Client Environment
[1222] BC4J Property jbo.saveforlater='false' -->(SessionImpl) from System Default
[1223] BC4J Property jbo.snapshotstore.undo='persistent' -->(SessionImpl) from System Default
[1224] BC4J Property jbo.maxpassivationstacksize='10' -->(SessionImpl) from System Default
[1225] BC4J Property jbo.txn.handleafterpostexc='false' -->(SessionImpl) from System Default
[1226] BC4J Property jbo.connectfailover='true' -->(SessionImpl) from System Default
[1227] BC4J Property jbo.datasource_naming_factory='oracle.jbo.server.DataSourceContextFactory' -->(MetaObjectManager) from System Default
[1228] WARNING: Property jbo.maxpoolcookieageset to null
[1229] Skipping empty Property jbo.maxpoolcookieage from null
[1230] WARNING: Property PoolClassNameset to null
[1231] Skipping empty Property PoolClassName from null
[1232] BC4J Property jbo.maxpoolsize='4096' -->(MetaObjectManager) from System Default
[1233] BC4J Property jbo.initpoolsize='0' -->(MetaObjectManager) from System Default
[1234] BC4J Property jbo.poolrequesttimeout='30000' -->(MetaObjectManager) from System Default
[1235] BC4J Property jbo.poolmonitorsleepinterval='600000' -->(MetaObjectManager) from System Default
[1236] BC4J Property jbo.poolminavailablesize='5' -->(MetaObjectManager) from System Default
[1237] BC4J Property jbo.poolmaxavailablesize='25' -->(MetaObjectManager) from System Default
[1238] BC4J Property jbo.poolmaxinactiveage='600000' -->(MetaObjectManager) from System Default
[1239] BC4J Property jbo.pooltimetolive='-1' -->(MetaObjectManager) from System Default
[1240] BC4J Property jbo.qcpool.monitorsleepinterval='1800000' -->(SessionImpl) from System Default
[1241] BC4J Property jbo.qcpool.maxinactiveage='900000' -->(SessionImpl) from System Default
[1242] BC4J Property RELEASE_MODE='Stateful' -->(MetaObjectManager) from System Default
[1243] BC4J Property jbo.assoc.consistent='true' -->(MetaObjectManager) from System Default
[1244] BC4J Property jbo.viewlink.consistent='DEFAULT' -->(MetaObjectManager) from System Default
[1245] BC4J Property jbo.finder.range.size='DEFAULT' -->(MetaObjectManager) from System Default
[1246] BC4J Property jbo.passivation.TrackInsert='true' -->(MetaObjectManager) from System Default
[1247] Skipping empty Property jbo.ViewCriteriaAdapter from System Default
[1248] BC4J Property jbo.SQLBuilder='SQL92' -->(MetaObjectManager) from Client Environment
[1249] BC4J Property jbo.ConnectionPoolManager='oracle.jbo.server.ConnectionPoolManagerImpl' -->(MetaObjectManager) from System Default
[1250] BC4J Property jbo.TypeMapEntries='Java' -->(MetaObjectManager) from Client Environment
[1251] Skipping empty Property jbo.sql92.JdbcDriverClass from System Default
[1252] BC4J Property jbo.sql92.LockTrailer='FOR UPDATE' -->(MetaObjectManager) from System Default
[1253] BC4J Property jbo.jdbc.trace='false' -->(MetaObjectManager) from System Default
[1254] BC4J Property jbo.abstract.base.check='true' -->(MetaObjectManager) from System Default
[1255] BC4J Property jbo.assoc.where.early.set='false' -->(MetaObjectManager) from System Default
[1256] BC4J Property jbo.use.findbykey.for.assoc='true' -->(MetaObjectManager) from System Default
[1257] BC4J Property jbo.sql92.DbTimeQuery='select sysdate from dual' -->(MetaObjectManager) from System Default
[1258] BC4J Property oracle.jbo.defineColumnLength='skipDefines' -->(MetaObjectManager) from System Default
[1259] BC4J Property jbo.jdbc_bytes_conversion='jdbc' -->(MetaObjectManager) from System Default
[1260] BC4J Property jbo.tmpdir='./' -->(MetaObjectManager) from Client Environment
[1261] Skipping empty Property jbo.server.internal_connection from System Default
[1262] BC4J Property SessionClass='oracle.jbo.server.SessionImpl' -->(SessionImpl) from System Default
[1263] Skipping empty Property TransactionFactory from System Default
[1264] Skipping empty Property jbo.def.mgr.listener from System Default
[1265] Skipping empty Property jbo.use.global.sub.map from System Default
[1266] BC4J Property jbo.debugoutput='console' -->(Diagnostic) from System Property
[1267] BC4J Property jbo.debug.prefix='DBG: ' -->(Diagnostic) from /oracle/jbo/common/Diagnostic.properties resource
[1268] BC4J Property jbo.logging.show.timing='false' -->(Diagnostic) from /oracle/jbo/common/Diagnostic.properties resource
[1269] BC4J Property jbo.logging.show.function='false' -->(Diagnostic) from /oracle/jbo/common/Diagnostic.properties resource
[1270] BC4J Property jbo.logging.show.level='false' -->(Diagnostic) from /oracle/jbo/common/Diagnostic.properties resource
[1271] BC4J Property jbo.logging.show.linecount='true' -->(Diagnostic) from /oracle/jbo/common/Diagnostic.properties resource
[1272] BC4J Property jbo.logging.trace.threshold='6' -->(Diagnostic) from /oracle/jbo/common/Diagnostic.properties resource
[1273] BC4J Property jbo.jdbc.driver.verbose='false' -->(Diagnostic) from System Default
[1274] Skipping empty Property oracle.home from System Default
[1275] Skipping empty Property oc4j.name from System Default
[1276] Skipping empty Property jbo.shared.txn from System Default
[1277] BC4J Property jbo.ejb.txntimeout='1830' -->(SessionImpl) from System Default
[1278] BC4J Property jbo.ejb.txntype='global' -->(SessionImpl) from System Default
[1279] BC4J Property jbo.ejb.txn.disconnect_on_completion='false' -->(SessionImpl) from System Default
[1280] BC4J Property jbo.ejb.useampool='false' -->(SessionImpl) from Client Environment
[1281] Skipping empty Property oracle.jbo.schema from System Default
[1282] BC4J Property jbo.xml.validation='false' -->(MetaObjectManager) from System Default
[1283] BC4J Property ord.RetrievePath='ordDeliverMedia' -->(MetaObjectManager) from System Default
[1284] BC4J Property ord.HttpMaxMemory='102400' -->(MetaObjectManager) from System Default
[1285] Skipping empty Property ord.HttpTempDir from System Default
[1286] BC4J Property ord.wmp.classid='clsid:22D6F312-B0F6-11D0-94AB-0080C74C7E95' -->(MetaObjectManager) from System Default
[1287] BC4J Property ord.qp.classid='clsid:02BF25D5-8C17-4B23-BC80-D3488ABDDC6B' -->(MetaObjectManager) from System Default
[1288] BC4J Property ord.rp.classid='clsid:CFCDAA03-8BE4-11cf-B84B-0020AFBBCCFA' -->(MetaObjectManager) from System Default
[1289] BC4J Property ord.wmp.codebase='http://activex.microsoft.com/activex/controls/mplayer/en/nsmp2inf.cab#Version=5,1,52,701' -->(MetaObjectManager) from System Default
[1290] BC4J Property ord.qp.codebase='http://www.apple.com/qtactivex/qtplugin.cab' -->(MetaObjectManager) from System Default
[1291] Skipping empty Property ord.rp.codebase from System Default
[1292] BC4J Property ord.wmp.plugins.page='http://www.microsoft.com/isapi/redir.dll?prd=windows&sbp=mediaplayer&ar=Media&sba=Plugin&' -->(MetaObjectManager) from System Default
[1293] BC4J Property ord.qp.plugins.page='http://www.apple.com/quicktime/download/' -->(MetaObjectManager) from System Default
[1294] BC4J Property ord.rp.plugins.page='http://www.real.com/player/' -->(MetaObjectManager) from System Default
[1295] BC4J Property jbo.security.enforce='None' -->(SessionImpl) from System Default
[1296] BC4J Property jbo.security.loginmodule='oracle.security.jazn.oc4j.JAZNUserManager' -->(SessionImpl) from System Default
[1297] Skipping empty Property jbo.security.config from System Default
[1298] BC4J Property jbo.server.useNullDbTransaction='false' -->(SessionImpl) from System Default
[1299] BC4J Property jbo.domain.reopenblobstream='false' -->(MetaObjectManager) from System Default
[1300] BC4J Property jbo.server.retainAssocAccessor='false' -->(SessionImpl) from System Default
[1301] BC4J Property jbo.groovy.debug='false' -->(MetaObjectManager) from System Default
[1302] BC4J Property oracle.adfm.DefaultEventPolicy='NONE' -->(MetaObjectManager) from System Default
[1303] BC4J Property oracle.adfm.useRootFrameOnly='false' -->(MetaObjectManager) from System Default
[1304] Copying unknown Client property (java.naming.factory.url.pkgs='com.ibm.ws.naming:com.ibm.ws.runtime:weblogic.corba.j2ee.naming.url:weblogic.corba.client.naming:com.ibm.ws.naming') to session
[1305] Copying unknown Client property (jbo.applicationmoduleclassname='oracle.documaker.idocumaker.model.shared.app.IDMKRAppModuleAM') to session
[1306] Copying unknown Client property (name='IDMKRAppModuleAMLocal') to session
[1307] Copying unknown Client property (ApplicationName='oracle.documaker.idocumaker.model.shared.app.IDMKRAppModuleAM') to session
[1308] Copying unknown Client property (JDBCDataSource='jdbc/xxxxxxx') to session
[1309] Copying unknown Client property (java.naming.provider.url='corbaloc:rir:/NameServiceServerRoot') to session
[1310] Copying unknown Client property (DBconnection='jdbc/xxxxxx') to session
[1311] }} finished loading BC4J properties -
T43 BSOD's when connected to a Projecter
Ok here is a good one for you guys.
I have a T43 type 1875 that blue screens everytime it is plugged into a projector. I have other similar laptops (some T43's some HP's) and they all work with the projector without any issues. This system in particular also can connect to a LCD monitor without causing BSODing. I have swapped cables, updated video drivers, formatted the computer and reimaged. At this point I am lost. Any other suggestions?
Thanks in advance....What you describe is not an Apple or iPhone issue.
Talk to Toshiba. If you chose to pursue the issue with them, that is up to you. No one here can tell you what the correct solution is.
Keep in mind, all iPhones ship will a wall plug to permit the device being charged from a wall outlet.
Maybe you are looking for
-
Remove SelectionBackColor from a RichTextBox
I have a richtextbox with a highlighting feature. However, it seems impossible to revert the selectionbackcolor of the selected text when removing the highlight color. I cannot just hard-code the color as transparent or the richtextbox backcolor beca
-
How do i get my apple email to work after switching to icloud?
how do i get my apple email to work after switching to icloud?
-
Motion 4 upgrade preferences not highlighted
Hi, upgraded to Motion 4 but I can't get into preferences or import anything as no icons get highlighted. About Motion Preferences Provide Motion feedback Show All are non-responsive. Thanks for any advise. HH
-
No discount when moving from Lightroom 5 to CC?
I currently have Lightroom 5 and Photoshop CS5. Moving over to CC photoplan - is there no discount when you have perpetual licenses already?
-
Can anyone tell me if there are any plans for BT Vision to have channel 5 HD? It's so annoying having so few HD channels. Am thinking of going back to SKY