BSOD during Install

Bought Dreamweaver CS5 Educator and Student edition for daughter's college class. Tried to install on family computer, which is basic 1Gb, AMD Athlon 64 2800 machine. At about 20% installation progress (installing ADOBE HELP files) get quick BSOB and machine shutsdown and restarts. I deleted what was installed from Control Panel and tried again after full Windows Update and CHKDSK. Same Result.
So, I thought I would try to install to my personal machine which is AMD Athlon 64 X2 Dual Core 6400 with 3 Gb. Same identical result, BSOD at 20% installation progress during installatin of Adobe Help files and PC shuts down. During Windows recovery from serious error get just a generic "drivers, hardware, or software casued serious error" message. Nothing helpful.
I am running AVG antivirus and Superspyware on both machines. Both machines XP Home SP3.
Really stumped and have searched to no avail. Daughter is getting a little desperate to have installed so she can complete project.
Log of Installer session show 0 fatal error and two warnings.
Did short chat session with Adobe Tech Support and all they suggested was to uninstall and reinstall. Same result.

A couple things you can try if you are getting blue screens. First, if it is something with DW you can run the Adobe Clean Script (link below) and then try re-installing.
Adobe - Adobe CS5 Clean Tool
If that does not work you will need to get your disk out because in XP I believe this function required the disc:
sfc /scannow
Type that into the command prompt and let Windows repair and replace DLL files. I would recommend on backing up as a precautionary measure before doing that.
Unfortunately, Adobe support would have only been able to help if your system had stayed operational during the install because their installer does create a log, even in failure, and their support does allow the uploading of logs to troubleshoot installation errors.

Similar Messages

BSODs During Install

I been trying to install Windows 8.1 on my desktop custom build for a month and a half. I purchased a Giagbyte 78LMT-USB3 motherboard with an AMDFX-4103 processor and a 4 GB stick of Patriot DDR3 RAM. I purchased a Crucial M500 SSD and also a
new 700 Watt Rosewill PSU. I also have 2 other HDDs, a 2 TB WD Green drive and a 360 GB Samsung drive from an old HP computer that died.
I tried to install to the SSD, and I did get it fully installed once. However, I received BSODs within a minute of boot. Many different codes, DVP WATCHDOG VIOLATION, NFTS FILESYSTEM, MEMORY MANAGEMENT, plus others too numerous to remember.
I updated the MB BIOS with my flash drive, didn't seem to help. I tried to update the MB Drivers but it would always bluescreen before I could do anything.
So I decided to re-install Windows. I tried several times and received several BSODs during the setup itself. I received a CACHE MANAGER BSOD, NTFS FILESYSTEM BSOD and several BSODs without any specific problem listed. I updated the SSD
firmware to the latest version, March 25,2014, and still got BSODs on all install attempts. I then decided to attempt to install on my HDD. I attempted to install on the Samsung drive and received several more of afore mentioned BSODs. I have yet
to get Windows 8.1 installed to a point where it runs more than 1 minute without a BSOD. Right now I can't even get it to install.
I don't have any dump files to upload since it BSODs during the install attempts. Not sure where to go from here.
Edit: I also ran MemTest on it for 4 passes and it came back with 0 errors.

Check the SSD forums. Sometimes there are settings in the BIOS that will greatly affect how well a system tolerates an SSD.
-Noel
Detailed how-to in my eBooks:
Configure The Windows 7 "To Work" Options
Configure The Windows 8 "To Work" Options

BSOD while installing Windows 7

Hi everyone , I got a different BSOD problem while installing Windows 7 from Recovery CDs i made .
first i got HP Pavilion dv6-6155ee Entertainment Notebook
The problem starts approximately from two weeks , Win 7 starts to stop while i am
working so i made a recovery through the rec. partition i got two OS Ubuntu and WIn 7 , Making the recovery make a
problem in boot so i used Boot repair Disk , and i do the recovery
[url=http://postimg.org/image/65ojt3p7n/][img]http://s13.postimg.org/65ojt3p7n/20130810_011028.jpg[/img][...
but the BSOD problem doesn't go off i tried to Update the drives , i used Driver Verifier but it seems as it is not working , i made a CHKDSK But no error appeared .
i decided to install a fresh windows from the rec. Cds and i chose Factory reset
[url=http://postimg.org/image/jsxld146b/][img]http://s21.postimg.org/jsxld146b/20130817_183029.jpg[/img][...
but here is the problem that i face now during installing software
[url=http://postimg.org/image/v1rwir8v1/][img]http://s22.postimg.org/v1rwir8v1/ded.jpg[/img][/url]
BSOD appears in different errors
[url=http://postimg.org/image/trj26q4kd/][img]http://s22.postimg.org/trj26q4kd/20130810_181958.jpg[/img][...
[url=http://postimg.org/image/s4yfz8hwd/][img]http://s22.postimg.org/s4yfz8hwd/20130810_163605.jpg[/img][...
[url=http://postimg.org/image/e8hj8jwtz/][img]http://s15.postimg.org/e8hj8jwtz/IMG_20130816_WA0012.jpg[/i...
[url=http://postimg.org/image/ktu98bcon/][img]http://s15.postimg.org/ktu98bcon/20130817_174511.jpg[/img][...
[url=http://postimg.org/image/upiit7jlt/][img]http://s16.postimg.org/upiit7jlt/20130813_182434.jpg[/img][...
[url=http://postimg.org/image/pdzdwsb4z/][img]http://s21.postimg.org/pdzdwsb4z/20130812_190022.jpg[/img][...
[url=http://postimg.org/image/kub7buie5/][img]http://s22.postimg.org/kub7buie5/20130812_172515.jpg[/img][...
[url=http://postimg.org/image/c43k35oe1/][img]http://s12.postimg.org/c43k35oe1/20130812_015335.jpg[/img][...
[url=http://postimg.org/image/f8uo2d8tr/][img]http://s11.postimg.org/f8uo2d8tr/20130810_223406.jpg[/img][...
I also tried to change the Bios Date from 2013 to 2011 but nothing , i make sure that the wifi is on , i do memrytest 86 - Memory Test - HDD Test and no error detected
[url=http://postimg.org/image/p1j99450t/][img]http://s14.postimg.org/p1j99450t/20130814_042942.jpg[/img][...
[url=http://postimg.org/image/ylbyflnxj/][img]http://s23.postimg.org/ylbyflnxj/20130810_190505_1.jpg[/img...
[url=http://postimg.org/image/45a015pwt/][img]http://s14.postimg.org/45a015pwt/20130814_042942.jpg[/img][...
i read that using kill disk will fix it So i used it for the rec. partition and c: partition
and nothing changed
and of course F8 wont help as there is no windows now .
so do you have any ideas that may Help and thanks in advance

see this topic as the images can't be displayed : http://www.tomshardware.com/answers/id-1770940/bsod-errors.html

Itunes error during install service apple mobile device failed to start.. help

I had to install Chrome browser in order to use my gmail account. Now I cannot open itunes on my Window Vista computer, get a Microsoft Visual C++ Runtime Library. R6034. I uninstall itunes and reinstall itunes 64-bit itunes installer. During install received error during the 'starting services' process "Service 'Apple Mobile Device' (Apple Mobile Device) failed to start. Verify that you have sufficient privelges to start sytem services. I ignore with the same error message so I abort. At the end of uninstalling I received the Microsoft Visual C++ Runtime Library error again. I click ok than an error from itunes. "itunes was not installed correctly. Please reinstall itunes. Error 7 (Windows error 1114). I click ok. Help..

Try the following user tip:
Troubleshooting issues with iTunes for Windows updates

Error During INSTALL of Application Export File

An error is reported during INSTALL of an application that I am trying to copy (Import/Install) from a "development" Work Space into a "production" Work Space. The production (target) Work Space is on the same HTML DB instance as the development Work Space.
I am receiving the following INSTALL error:
ORA-20001: GET_BLOCK Error. ORA-20001: GET_STMT error. ORA-20001: Execution of the statement was unsuccessful. ORA-06550: line 15, column 1: PLS-00103: Encountered the symbol &quot;,'39','RD8','8','S','10','U','43','UD','41','UG','11','W')) END)&quot; when expecting one of the following: . ( * @ % &amp; = - + ; &lt; / &gt; at in is mod remainder not rem &lt;an exponent (**)&gt; &lt;&gt; or != or ~= &gt;= &lt;=
Following is some pertinent (hopefully) information:
The above INSTALL error takes exception to part of a Region Select (sql) that works fine in the development Work Space.
The common HTML DB (v1.6) instance is on UNIX.
A new Work Space was created on the same instance.
A new schema name was created during creation of the new Work Space. However, this schema does not point to a database. (We were not certain how to setup the schema to parse to our live database.) I will be running DBLINK upon production application startup in order to access the database objects.
EXPORT INFO -
File Format: UNIX (also, tried DOS but received same error during INSTALL)
IMPORT INFO -
File Type: Application/Page Export
File Character Set: Western European Windows 1252
Target Work Space is newly created on the same HTML DB instance.
INSTALL INFO -
*Parse As Schema: COLLIVE17 (Again, this schema does not parse to a database. I intend to use DBLINK.)
*Build Status: Run and Build Application
Please refer to above error message.
Again, any insights or suggestions are appreciated.

Urgently need help! I've read several other Forum messages having a related problem but none having same Install error message.
Again, my Export/Import from development Workspace to production Workspace is successful. The following error is reported when I attempt to "Install" into the production Workspace:
ORA-20001: GET_BLOCK Error. ORA-20001: GET_STMT error. ORA-20001: Execution of the statement was unsuccessful. ORA-06550: line 15, column 1: PLS-00103: Encountered the symbol &quot;,'39','RD8','8','S','10','U','43','UD','41','UG','11','W')) END)&quot; when expecting one of the following: . ( * @ % &amp; = - + ; &lt; / &gt; at in is mod remainder not rem &lt;an exponent (**)&gt; &lt;&gt; or != or ~= &gt;= &lt;=
The "snippet" of Region Sql Select code that relates to the reported error is:
ELSE htmldb_item.display_and_save (5, DECODE (GET_GRADE_B93 (sac.stc_final_grade,sac.stc_verified_grade),'18','AU','1','A','3','B','4','C','7','CR','5','D','46','DR','6','F','47','FW','49','IB','30','IC','31','ID','23','IF','44','MW','9','NC','21','RD','14','RD0','33','RD1','32','RD2','34','RD3','35','RD4','36','RD5','37','RD6','38','RD7','39','RD8','8','S','10','U','43','UD','41','UG','11','W'),'GRADE_'||ROWNUM) END q_v_grade,
HTML DB version is: 1.6.0.00.67. I've also tried to Export/Import/Install the application into the "same" Workspace specifying the same schema, and only changing the Application ID. However, I get the same Install error (see above).
Any suggestions on things to try in order to get application into production is greatly appreciated.
Thanks, Bernard.

Creative cloud installer just disappears during install

I had creative cloud and on last update most of the applications are gone along with the desktop icon.
I have tried to install creative cloud again - but it just stops halfway and disappears during install.
I've tried safe mode install
Ive renamed OOBE folders in both librarys
I've tried the adobe application manager and that crashes on install
I've tried the Adobe clean up tool
Nothing is working to get creative cloud to reinstall on the computer - I've lost about 4 applications in creative cloud
Working on a Mac - Yosemite OS

Hi! The cleaner failed - simply could not detect any creative cloud products. ( It did find a previous CS6 installation, long since uninstalled, actually).
Didn't get a chance to try ROOT, as an Adobe tech (Loveneesh) remoted in and did some 'known fixes'... basically he cleaned up the failed CC desktop installation ( deleted a couple of folders) - and then gave "wide open" permissions to a couple of sets of library folders ( One for machine, and one for user). I believe they were
/library/application support/
/library/application support/Adobe/
/users/[username]/library/application support/
/users/[username]/library/application support/Adobe/
Still couldn't install CC desktop, (failed twice!) BUT that at least allowed the installation of "Adobe App Manager" - which was subsequently UPGRADED to CC Desktop. Something of a clever workaround, if you ask me!
And now its all working OK again.
I'm a bit bothered by the somewhat cavalier ""Everybody" permissions applied to library folders, but as I understand this is the quick fix when nobody quite knows what the heck is going on with permissions... (I suppose ROOT access gives much the same effect for installations)

Error message during install

Anyone have a clue what to do? Keep receiving error message during install. Have disable firewall, no help. Here is the error message:
Error Microsoft.VC80.CRT.type="win32".version="8.0.50727.4053".publicKeyToken="1fc8b3 b9a1e18e3b".processorArchitecture="amd64".
HRESULT:0x8007054f
I uninstalled because Itunes would not upgrade. Now I can't install. I was able to install an older version, but couldn't access my music because it was an older version, so I uninstalled that and now have nothing. I would appreciate any help.
Thank you.

Glad to read that renaming trick helped to get iTunes installed for you. Your thread here is fine for more questions.
Search your hard drive for your music - it should still be there, but perhaps this fresh install of iTunes just isn't seeing it.
Find music: http://support.apple.com/kb/TS1408
You absolutely do NOT want to sync your iPhone with an empty iTunes library. It will erase everything. Apple only gives you one download and you need to make backups. I hope it is still on your PC! But at least you have it on your iPhone.
I don't think you synced your iPhone with your father's iTunes, or his music would be on it. Have a look in a folder named Previous iTunes Libraries. There might be an iTunes database ITL file in there that you can use.
They have names like "iTunes Library 2009-04-06.itl" which would be from April 6th, 2009.
Press and hold the shift key while starting iTunes, and when prompted, choose the most recent previous library. Does it show most of your music, and can you play some songs in iTunes OK?

Audigy 4 gives blue screen during install of drivers on Windows XP SP3

FAudigy 4 gives blue screen during install of drivers on Windows XP SP3! Specs
Asus a8n-sli
GB RAM
6600 GT
Audigy 4
LC Power 550 W PSU
I put in the installation CD that comes with the card. I want to install everything (full install), and mid-install I get a blue screen.
I then uninstalled everything and tried only to install the updated drivers from the website in safe-mode and still a blue screen. Should I get the dump file and send it to Creative?
How do get this card to work like it should? I also have a remote control that came together with the card.
Im currently using the onboard AC97 Realtek ALC850 soundcard.
Whats the whole procedure to make this work? Detailed please. How do I eliminate all traces of the audigy on my PC?

Re: Audigy 4 gives blue screen during install of drivers on Windows XP SP38 Perhaps you'd want to read this old thread of mine about my misadventures with the same exact card you are trying to use. IMHO that card was not worth the time and money I spent on it (even even less the time and money it caused me to spend afterwards to repair the damage it caused.
Message Edited by CreativeSkeptic on 2-23-2008 0:4 PMMessage Edited by CreativeSkeptic on 2-23-2008 0:4 PM

"WRITE SAME failed. Manually zeroing." error during install or boot

Hello everyone!
Since the lasts kernels (I'm almost sure it happens since 3.9 because 3.8 worked fine) I can't boot on Archlinux anymore. This error floods my screen and I can't do anything, and because the new Archlinux iso (june 2013) comes with 3.9 kernel it now also happens during installation. Fortunately, I saved the may iso so I still can install archlinux and switch during install to LTS kernel but this is not a good solution. I can't find a solution online, some people have this issue but it seems to be a bit different everytime.
I use Archlinux on a server, with hardware raid : Dell PERC H200a with LSI SAS2008 according to my BIOS. According to http://kernelnewbies.org/Linux_3.7, the WRITE SAME SCSI command "allows the same block to be efficiently replicated throughout a block range. Only a single logical block is transferred from the host and the storage device writes the same data to all blocks described by the I/O (commit)". Here is the exact configuration :
- DELL® PowerEdge R210 II
- 1x Intel® Xeon® E3 1220 V2
- HDD: 2 x 1 To SATA2 RAID
- RAID: Hardware, Dell PERC H200, (Raid 1)
So my first problem is that I can't find online if my server is capable of this command (but I don't think so) and then the other issue is that I want to know if I can disable it. I found kernel patches for this issue :
https://patchwork.kernel.org/patch/1898441/ and https://patchwork.kernel.org/patch/1982051/ (the first link seems to be a better solution).
Then, I checked in the kernel source of 3.9 and I think that this patch isn't implemented (there is no device_write_same_capable function for instance). But kernel patching is not a really good solution, if I have to patch my kernel everytime the main kernel is updated...
After some research, I found that my hardware RAID driver seems (I'm not sure) to be the kernel module "mpt2sas", so I checked both may and june isos of Archlinux and it's the same version (14.1) so it shouldn't be the problem.
Does somebody can help me on this issue ? I don't really know what to do now.
Thanks for reading, if I forgot something or if you want more informations, ask me!
Bye.
PS : My English isn't very good, sorry.
EDIT : I found a part of the solution ! It seems to be an issue with the kernel that doesn't detect properly if my disc is capable of doing WRITE SAME command.
So I have to write "0" in the file "max_write_same_blocks" under /sys. But the problem is that /sys is renewed every boot so I don't know how to make my changes permanent. I made a systemd service file, it almost works, but this solution isn't nice : the parameter is applied lately so errors shows at the beginning and this is not really easy to set up. I prefer a solution like "sysctl" but it seems that it only controls parameter under /proc/sys and not /sys, am I right ?
Moreover, I tried two other things : Ubuntu 12.04 with kernel 3.9.4 works and Archlinux iso with 3.8.10 has max_write_same_blocks > 0 and it also works... So I don't really understand this issue. Maybe in 3.8 the parameter max_write_same_blocks has no effect (or not the same as in 3.9) ?
Here is the systemd file that I made to reduce the issue :
[Unit]
Description=No WRITE SAME
After=local-fs.target
[Service]
Type=oneshot
ExecStart=/bin/sh -c 'echo 0 > /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0/host0/target0:1:0/0:1:0:0/scsi_disk/0:1:0:0/max_write_same_blocks'
RemainAfterExit=no
[Install]
WantedBy=multi-user.target
This is not a good solution, see my next post. I don't delete it in case you want to compare.
Last edited by rfnx (2013-06-02 15:26:50)

I found a solution to disable the WRITE SAME command. That doesn't answer all my questions but it solves my issue. I was looking for a file like "sysctl.conf" but for /sys parameters : you already can do that in Arch, just create a file that ends with ".conf" in tmpfiles.d and add one line per parameter you want to modify. This file will be loaded early at boot.
To disable it in an existing Archlinux installation, add in you file the line :
w /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0/host0/target0:1:0/0:1:0:0/scsi_disk/0:1:0:0/max_write_same_blocks - - - - 0
Read the manpage of tmpfiles.d if you don't understand this line, it depends on your configuration and you can't copy it.
Then reboot and no more error !
If you want to disable it during the Arch install, just change directly the value you want in /sys. You have to do it at the beginning before mounting partitions, for instance just after choosing your keymap.
Bye.
Last edited by rfnx (2013-06-02 15:34:11)

Cann't install up to date update Lion 10.7 cancel during install error: damaged by download but it's download without errors 1,34 GB. What can I do has anyone a solution to solve this issue?

cann't install up to date update Lion 10.7 cancel during install error: damaged by download but it's download without errors 1,34 GB. What can I do has anyone a solution to solve this issue?

I wish I fully understood your post, but perhaps you should try re-downloading. Are you trying to download the 10.7.3 update? If so, then try downloading OS X Lion Update 10.7.3 (Client Combo).

I5 17''MBP gets blue screen during install windows 7 32 bit

Hello all:
I heard that quite many people get classic windows' "blue screen" during using windows , whatever Windows XP, Vista or 7. But now i face the "blue screen" during install Windows 7, which means I even can not complete installation.
I bought my Macbook Pro i5 17'' one month ago, and I'm trying to install Windows 7 but I face the problem during the installation. After finishing first 4 steps the computer would restart and start to "finish installation", but at this time it gets "blue screen" and shows "error: 0x0000009c" and stuck there. I have to shut down the turn off button and interrupt the installation.
I don't know if there's any one else face this unlucky situation. I searched on the net and it says the problem could be from memory, graphic card (too new), or even overlocking the cpu,whatever it must be the problem of hardware. I thought it might be the problem of compatible.
If anyone knows how to deal with this problem??!! I do need to use some software under Windows system!

It is good to see that it is indeed a USB2.
The support software on the USB is used in the Pre-boot environment setup and provides drivers for Apple specific hardware, GPU, BT, Mouse, etc. You can verify that by looking at the USB contents. The DVD contains generic drivers when hardware is not recognized as defaults to use. Apple does enough 'secret sauce' to make them different. The following does not explicitly state the USB2 need when using the DVD Installer and mentions W8 (not W7).
From Boot Camp: Creating an ISO image from a Windows installation DVD - Apple Support
Insert a blank USB 2 flash drive that is a least 16GB in size into a USB port on the computer. Boot Camp Assistant uses this drive to store the Windows 8 install media and support drivers during installation of Windows.
Note: This flash drive needs to be formatted for the FAT32 file system and must use the Master Boot Record partitioning scheme. Use Disk Utility to check the format of the flash drive before proceeding, and partition or erase the flash drive if necessary.
I suspect the GPU is not getting the correct driver and the Installer fails. The Generic VGA should work. From the OS X side, can you see files in your BC volume? If yes, can you look for logs in the BC volume at the following locations.
./Windows/Inf/setupapi.dev.log
./Windows/Inf/setupapi.offline.log
./Windows/Inf/setupapi.setup.log
./Windows/Logs/SetupCleanupTask/setupact.log
./Windows/Logs/SetupCleanupTask/setuperr.log
./Windows/Panther/FastCleanup/setupact.log
./Windows/Panther/FastCleanup/setuperr.log
./Windows/Panther/setupact.log
./Windows/Panther/setuperr.log
./Windows/Panther/UnattendGC/setupact.log
./Windows/Panther/UnattendGC/setuperr.log
./Windows/setupact.log
./Windows/setuperr.log
./Windows/System32/Sysprep/Panther/IE/setupact.log
./Windows/System32/Sysprep/Panther/IE/setuperr.log

BSOD After Installing Boot Camp 5640 Drivers on Win7 x64

I get a BSOD after installing the Boot Camp 5640 drivers on Windows 7 x64 Professional due to "CACHE_MANAGER". If install the drivers individually, this does not happen (provided I don't run bootcamp.exe).
This wouldn't be a problem except that I can't get the trackpad working properly without running setup.exe or bootcamp.exe.

what is your exact rMBP
check here and make sure you are trying to install the right boot camp pkg for your windows version and machine
http://support.apple.com/kb/ht5634

Error has occured during install before the requested operation for i tunes could not be completed your system has not been modified

error has occured during install before the requested operation for I tunes could be completed Your system has not been modified to complete the install run the installer again and I have it still won't work

See:
Trouble installing iTunes or QuickTime for Windows

Error During install Exchange 2013 through Powershell on Server 2012 "Mailbox role: Client Access service"

Dear all
During install Exchange 2013 through Powershell on Server 2012 I got this error in Mailbox role: Client Access service :
The following error was generated when "$error.Clear();
$BEVdirIdentity = $RoleNetBIOSName + "\OWA (Exchange Back End)";
new-OwaVirtualDirectory -Role Mailbox -WebSiteName "Exchange Back End" -DomainController $RoleDomainController
set-OwaVirtualdirectory -Identity $BEVdirIdentity -FormsAuthentication:$false -WindowsAuthentication:$true;
" was run: "An error occurred while creating the IIS virtual directory 'IIS://MONAMBX2.mona.local/W3SVC/2/ROOT/o
wa' on 'MONAMBX2'.".
The following error was generated when "$error.Clear();
$BEVdirIdentity = $RoleNetBIOSName + "\OWA (Exchange Back End)";
new-OwaVirtualDirectory -Role Mailbox -WebSiteName "Exchange Back End" -DomainController $RoleDomainController
set-OwaVirtualdirectory -Identity $BEVdirIdentity -FormsAuthentication:$false -WindowsAuthentication:$true;
" was run: "The operation couldn't be performed because object 'MONAMBX2\OWA (Exchange Back End)' couldn't be fo
und on 'MonaDc1.mona.local'.".
Any advice please !!

I can't answer your question but I had a similar issue when I was trying to move our mailbox database off the C: drive. Our environment still has an Exchange 2007 server in it and when I was trying to move the database on the 2013 server, I would get
error messages saying the database does not exist. It seemed like it was trying to move the database on the 2007 server from the similar error messages that I was getting. To get around it, I deleted the database and created a new one on the drive
where we wanted it.
I discovered this when I was configuring the Antispam settings. I deleted our 2007 settings, added them to the 2013 shell, the settings appeared on our 2007 server. The shell on 2013 was making changes to 2007.
I'm not sure if there is a "Get|Set or New" command that I/we should be using when this happens. Or maybe my issues will be fixed if I just remove the Exchange 2007 server? I'm not ready to do that yet because I can't configure the spam filtering
on 2013 yet with its shell not being able to make the changes that we need.
I don't know if your environment is in coexistence mode like mine.
Hopefully someone else out there has an answer or can tell us when/how the shell can make the appropriate changes to the 2013 server. Does this happen after the 2007 server is removed?

How to install XE and specify the SID (instead of XE) during install

I would like to use Oracle 10g Express Edition for development purposes but I already have an existing project that requires a specific SID.
I tried following some instructions on asktom.oracle.com on changing the SID but it was disastrous and did not work.
Ultimately I have to rip XE off and reinstall everything because it was so mucked up.
I would like to reinstall XE but during install specify the SID just like I can with Oracle 10g R2 Enterprise Edition.
Can someone please tell me how to do this, and Oracle if you are listening, can you modify XE so that the SID can be specified on install? This one thing is a deal breaker for me and am considering falling back and using postgresql for the initial release of this product instead of Oracle to clients. I am sure many of them would upgrade to Oracle Enterprise edition if I were able to release a product based on XE first.
thanks
OracleTek

At the time of installation , you can't change SID XE.
After installation, you can add another service name
Check following thread for more details
Re: How to create service on Oracle 10g XE
- Virag Sharma
http://virag.sharma.googlepages.com
http://viragsharma.blogspot.com

BSOD during Install

Similar Messages

Maybe you are looking for