BSOD ha20x2k.sys.. help from
IRQ_LESS_OR_EQUAL
that happened after playing starship troopers for a while....
i got latest firmware and drivers for everything..
AMD Athlon 64 X2 4400++ABIT Fatalty AN8-SLI2x XFX 7800GTX Extreme Gamers Edition in SLISound Blaster X-FI Fatalty FPSOCZ EL DDR PC-3500 Gold GX Dual ChannelEnermax EG70AX-VE(W)SFMA 600W ATX V2.00
Have you done any other troubleshooting on the system yet? If so, perhaps post up some quick detail on what you've tried.
For instance, it could help to move the card to another PCI slot, as that will make sure it's assigned other resources (like a different IRQ). Don't put it in the slot directly nexto the graphics card, if you can avoid it.
Are all the latest system updates (where available) loaded aswell?
Cat
Similar Messages
-
Keep getting BSOD and need help PLEASE ! P7N Platinum Sli
Hey guys ,
Can someone please help me ? I have been getting BSOD for along time now and then i get a windows recovered from serious error when it boots back up , i always send in the error report and usually it says a driver problem but i have re-installed every driver servral times and and re-formated my pc sevral times to try and get it to run right . Now i finally got a different report back from windows error reporting saying a "Non Compatable BIOS is the cause " here is the error report screeny i took and uploaded to flickr http://farm4.static.flickr.com/3538/3349882297_4a3194e3df_b.jpg and this is another screeny in flickr of my BIOS in MSI Info View http://farm4.static.flickr.com/3445/3349882397_ef282a33d2_b.jpg , i believe i have the newest BIOS installed and the correct one also and have been running that version for along time . When i first setup this system i could not get my Q9550 to boot at all with this mobo till i updated the bios to the P0B6 but have never had it stable from BSOD . My Specs are Q9550 "Core 2 Quad Yorkfield SLAWQ Q9550 333 2.83 12M " / MSI P7N Platinum 750i SLI / OCZ Vendetta CPU cooler / 4GB- 4x1GB OCZ FLEX DDR2 1150 / OCZ GameXtreme 1010W / 2x - XFX GTX260 Black Edition in SLI / 1TB Seagate HD .
Also i had just tried the live update but it says there is no new updates for bios , when i first did the update i used a 3.5 floppy and flashed the bios to the ver i currently have now because there was no way for me to use the live update with XP Pro 64bit , Now im running Xp Pro 32bit w. SP2
Please help ??? Please help ??? Please help ??? Please help ??? Please help ??? Please help ??? Please help ??? Please help ??? Please help ??? Please help ??? Please help ??? Please help ???Quote from: NovJoe on 14-March-09, 11:22:13
I suggest that you clear CMOS and use flash it to the BIOS v1.1 under the MSI website for your board and see how it goes.
http://global.msi.com.tw/index.php?func=downloaddetail&type=bios&maincat_no=1&prod_no=1373
LOL thats funny !!!!! 1.1 is what came installed on the mobo and is not compatable with the Q9550 it will never boot to bios using 1.1 with a quad core ! Thats the first problem i had thats why i explained all the steps i had to go through to get this mobo / cpu to boot with the help from MSI tech support ! -
GF4 TI4200 BSOD Dilemma - Please help!
Greetings gurus and fellow frustrated gamers. I purchased MSI's GF4 TI4200 about a year ago and have been putting up with a problem I thought was related to other components for a long time. Every single 3D graphics game I play in windows XP will eventually and utterly crash with a Blue Screen of Death (BSOD) which relates always to the nv4_dsp.dll file which is Nvidia's driver. I have tried 12 drivers...MSI/NVidia/experimental with no change. With help from the folks on the forum I replaced the PSU with an Antec 400w with no change. I have tried my old Geforce2 MX400 with the same problem. I have reformatted the computer 8 times and removed every single additional component except what was required to test my problem. I just purchased Star Wars Galaxies and am now crashing 8-15 times a day. I generally go 20-30 minutes between crashes. This is no longer acceptable. I have received this crash on Warcraft III, WC3:TFT, Neverwinter Nights, SWG, Black & White, and many more.
I have found through search engines that this has something to do with some Windows XP systems and Nvidia drivers and is an issue that does not have a fix. I am hoping that you can offer something that I can do to fix this problem.
Before you ask...this has nothing to do with any other component in my computer. It is not heat, the psu, the motherboard, the memory, the hard drives, etc. I have replaced every single piece in this computer and it still occurs. Check out this link for an example of someone else with the same problem: Similar Problem or use a search engine and type: nv4 blue screen. You will see what I mean...this is happening to tons of people.
My question: Is there a fix?
Any help is most appreciated. If there is not a fix, ATI is my only direction I can take.Richard,
Well you are right about it not using IRQ 5, however, it is not conflicting with any other IRQ that I can see. The view under resources by connection reads:
(ISA) 0 System Timer
(ISA) 3 Communications Port(COM2)
(ISA) 4 Communications Port(COM1)
(ISA) 6 Standard floppy disk controller
(ISA) 8 System CMOS/real time clock
(ISA)11 Microsoft ACPI-Compliant System
(ISA)13 Numeric data processor
(ISA)14 Primary IDE Channel
(ISA)15 Secondary IDE Channel
(PCI) 5 VIA Rev 5 or later USB Universal Host Controller
(PCI) 5 VIA Rev 5 or later USB Universal Host Controller
(PCI)16 NVIDIA GeForce4 Ti 4200
(PCI)17 Texas Instruments OHCI Compliant IEEE 1394 Host Controller
(PCI)18 Wireless-G PCI Adapter
(PCI)19 Creative SB Live! Series (WDM)
Please advise. Thank you for the response.
Jeremy -
How are you supposed to get help from Apple if you don't know what your serial number is? They say to input the serial number of the "product" that you are asking about. Since my problem is how to deauthorize/authorize computers, and they are saying I have more than 5 (which I have never owned more than 5 computers in my life), I can't imagine what serial number they mean. Does it mean your desktop computer? If so, which one? Do they mean your device? LIke your iPhone, iPod or whatever? Do they mean the software ON one of your computers and/or devices? If so, which program, and on which computer/device?
We have three operational computers, one does not have iTunes on it. Since Apple is saying I have more than 5 authorized computers, and I can't imagine what they are, I am afraid to deauthorize all my computers. See what I mean? I just wanted to ask the question about how I can find out WHICH computers Apple thinks I have authorized, so I can decide if it's safe to deauthorize them all or not. I only know of 2 computers that have iTunes on them, so how can there be 5? We also have 2 iPhones and 2 iPods in this family, but one of the iPhones has his own apple id. He may have been using mine, since his computer died. I read that those don't count as "computers" to the 5. Do they, then?
Help! I can't contact apple because I have no idea what they mean about serial number. I doubt they would help me anyway. In order to get the serial number off my desktop computer (that has iTunes on it already), I will have to move furniture, so I don't want to if that's not it. Is there some way to find the serial number in the software, either on my desktop or my iPhone?sunshinecowgill wrote:
We have three operational computers, one does not have iTunes on it. Since Apple is saying I have more than 5 authorized computers, and I can't imagine what they are, I am afraid to deauthorize all my computers. See what I mean? I just wanted to ask the question about how I can find out WHICH computers Apple thinks I have authorized, so I can decide if it's safe to deauthorize them all or not.
You could have more 5 computers authorized if you ever, for example, reformatted a hard drive or replaced a hard drive without deauthorizing the computer first. Apple's system would see that as a different computer, even though you don't. There's nothing to be afraid of in deauthorizing everything and the reauthorizing what you actually have. You won't lose any data. Mistimp is correct, they can't tell you which computers are authorized. -
My IMAC OSX 10.6.8 2.8 GHz intelcore 2Duo 4GB 800 Mhz DDR2 SDRam recently had to have its hard drive replaced by apple thy actually had to give me a larger one because mine was no longer available,They also reinstalled all my programs and data from my 2 terrabite time machine back up. I got my system home and found that I had to upgrade most of my programs which I managed with a little help from my friends, but I still have one problem that I can't solve I have a Nikon Coolpix S6 that I have Been Syncing with my Iphoto since I've got it 3 years ago and now when I place it in the cradle the program reconizes it and says that it is going to start to import the new photos the little white wheel in the center of the screen starts spinning but nothing else happens. I checked all my connections and they are goog plus I even downloaded a nikon progam just to double check the camera & cradle and it works there but it wont pair off with my IPhoto.
First go to iPhoto Preferences, look in both General and Advanced tabs to make sure that things are set to import from camera into iPhoto.
Then if that doesn't help, connect the camera and open Image Capture in your Applications > Utilities folder and see if you can use Image Capture to reset the import path from the camera to iPhoto.
Image Capture: Free import tool on Mac OS X - Macgasm
Message was edited by: den.thed
Sorry John, I didn't see your post when I clicked the reply button. Dennis -
How can i create a link in the context help from frontpanel elements like knobs and so on
i want to create on context sensitive online help and therefore need to know how i can place a hyperlink in the context help from labVIEW of a frontpanel element
lotto;
You can place your help file in LabVIEW help directory, which should be in \help. If you place your help file in that directory, then when you start LabVIEW, you can access your help from LabVIEW's help menu (there will be an extra entry with the name of your help file.)
To link your control or vi to this help file, open the front panel (or the panel where you edit the control) and open the VI setup. In the help path field write the following:
:\name.hlp
Where "name" in the name of your help file. in the "Help Tag" field you should enter the tag you already assigned to the topic in the help at design time. (I suggest the tag to be similar as the vi or control name.)
After all this, the next time you start LabVIEW,
you should be able to access the context help file to your control or vi by right-clicking on it and selecting "Online Help".
IMPORTANT NOTE: Be aware that you may loose files you locate in special directories in LabVIEW, like the help, because those directories might be overwritten when you upgrade your software. Another option can be to locate your help file in a directory other than LabVIEW's help. The steps are almost the same, except that you won't be able to access your help file from LabVIEW's help menu.
Best regards;
Enrique
www.vartortech.com -
would like to trace my ipod touch because I was robbed. I would find it please. need help from you guys. Not because I am able to get another. Thank you.
- If you previously turned on FIndMyiPod on the iPod in Settings>iCloud and wifi is on and connected go to iCloud: Find My iPhone, sign in and go to FIndMyiPhone. If the iPod has been restored it will never show up.
iCloud: Find My iPhone
- You can also wipe/erase the iPod and have the iPod play a sound via iCloud.
- If not shown, then you will have to use the old fashioned way, like if you lost a wallet or purse.
- Change the passwords for all accounts used on the iPod and report to police
- There is no way to prevent someone from restoring the iPod (it erases it) using it unless you had iOS 7 on the device. With iOS 7, one has to enter the Apple ID and password to restore the device.
- Apple will do nothing without a court order
Reporting a lost or stolen Apple product
- iOS: How to find the serial number, IMEI, MEID, CDN, and ICCID number -
Does anyone else share my frustration with BT for their lack of help over setting up their Home Hub 5 (HH5)?
I have just taken out an Infinity contract and had my new HH5 installed.
I have some fairly basic requirements for setting up my home network.
I couldn't undertake the set-up myself based on the (scant) information provided with the HH5.
I couldn't get any meaningful help from BT by chat or by phone. Mostly they wanted to tell me that this was not their problem but mine.
I couldn't get a manual from them - because apparently there isn't one
I can't seem to find the answer on this forum (which is fine: why should a general member of the public know more about the HH5 than BT who supply it?)
Essentially, I have gone from having a slow internet connection with an efficient in-house set up to having a fast internet connection with such an inefficient in-house set-up that I can't take advantage of the extra line speed.
Anyone else got anything similar to report?Thank you again john46.
I am very grateful for the help that people are trying to give me. (not so grateful for the comments of others - not you) that simply imply the problems I am experiencing are my fault or the fault of my devices when my tests suggest otherwise.
I find it really kind that people with no afiliation to BT are willing to give up their time to help me (and others).
However, I still can't believe that it is entirely responsible and ethical for a large organisation like BT to provide me with some equipment with no manual and with no technical help and then when it doesn't work to say 'computer says no', and then to suggest that I would get better help by looking on the forum.
I've checked out your link on printers and almost the first thing it says is that to prevent them becoming 'lost' the first thing you should do is to give them a static address. To do this, I need to 'see' the printer first. Even though the printer will initially print from my PCs whilst still invisible on the network, it eventually gets lost and the only way to solve it getting lost is to re-start the router.
If it is all my fault and it is not possible to use the HH5 as my router (if that is the correct term for the bit that runs the home network), my next course of action will be to ask BT to supply one of their original VDSL modems and to connect my original DrayTek router to that - I know the home network worked fine with that. Unfortunately, when I asked BT if this is possible, they said that if I didn't ask for a separate modem when I placed the order I am not able to change to one now.
So: for whatever reason (whoever's 'fault' it is), I have a HH5-based home network that doesn't work. I would like to fix it. But the 'Catch 22' is that no one in BT can help sort the HH5-based home network and it 'isn't their problem anyway', no one on the forum has been able to help yet, and BT will not provide an alternative set of equipment to allow me to access Infinity and still maintain my home network in a manner that used to work perfectly before I contracted to BT.
Where do I go now? -
I have formatted my laptop, Reinstalled all my Adobe softwares and still the same problem continues.
Photoshop sometimes gets stuck in between while working no matter what the file size and dimensions. Its not about lagging. The screen is just stationary and I can't access any of Photoshop's commands for the stationary period of some seconds or a minute. I can only minimize it. Photoshop even crashes at times.
I have latest wacom drivers installed 5.3.5-5, Bamboo dock installed, and NVIDIA, GT 740M version 347.52. I have verified the problem with Wacom but they say the tablet doesn't have a problem. I have even tried using Intuos 5. When I use the zoom command with mouse the document zooms in and out continuously without any control.
I tried to get help from Photoshop CS6 GPU FAQ
but in vain.
Bamboo Create Medium CTH 670/K0 C
Windows 8.1 with NVIDIA graphic card and Intel R HD graphic cardIf you have both a Nvidia GPU and Intel GPU on your machine have you disabled the Intel GPU in windows Device manager. Adobe in the GPU FAQ clearly state that you may have Photoshop problems if your running machine configuration has multiple GPU that are different GPU.
-
How to (make best) use external js library from html object (need help from dev)
Ok, on another discussion about rotating full screen backgrounds slideshows, i was orientated to try a small lib named "backstrech"
I throw myself in, and i really like what we can do with it.
To use it simply, just make an html object and paste this in :
<script src="http://musecdn2.businesscatalyst.com/scripts/4.0/jquery-1.8.3.min.js" type="text/javascript"></script>
<script src="assets/jquery.backstretch.min.js" type="text/javascript"></script>
<script>
$.backstretch([
"http://dl.dropbox.com/u/515046/www/outside.jpg"
, "http://dl.dropbox.com/u/515046/www/garfield-interior.jpg"
, "http://dl.dropbox.com/u/515046/www/cheers.jpg"
], {duration: 3000, fade: 750});
</script>
then add the jquery.backstretch.min.js to your "downloaded files" (file menu > files to download)
And you’re done.
Now, i need some help from better developers.
As you can see, my first line is a call to jquery, the same that we find later in Muse exported code.
Reason 1 : without this line, jquery is not defined and the plugin won’t work.
This raises 2 issues :
- We load twice the same ressource which is useless (100k)
- loading js is all about having the page hangs while it loads, hence, they are put at the end of the body.
Does anybody know a way to load this particular html script AFTER we are sure the muse scripts (esp. jquery) have been loaded ?
(in the Edge Animate world, i’d go for the yepnope, and put it at the right place in the code, though, here i have no access to page load structure except head)
PS : in addition to that, i made an exported page/excluded from navigation where i put all the images i wanted for the background, i could then simply change the images lines :
, "http://dl.dropbox.com/u/515046/www/garfield-interior.jpg"
to
, "images/my_image_name_as_in_ressources.jpg"Got it, there was a bug in my code. Here is what you do:
1. Download the js file https://raw.github.com/srobbin/jquery-backstretch/master/jquery.backstretch.min.js
2. In Muse: Go to File -> Add Files for Upload and add the script file
3. Open Page Properties -> Metadata -> HTML for <Head>
Paste this code in:
<script>
window.onload = function() {
var loaded = function() {
$.backstretch([
"http://dl.dropbox.com/u/515046/www/outside.jpg"
, "http://dl.dropbox.com/u/515046/www/garfield-interior.jpg"
, "http://dl.dropbox.com/u/515046/www/cheers.jpg"
], {duration: 3000, fade: 750});
//Load the plugin:
var head= document.getElementsByTagName('head')[0];
var script= document.createElement('script');
script.type= 'text/javascript';
script.onreadystatechange = loaded;
script.onload = loaded;
script.src= 'assets/jquery.backstretch.min.js';
head.appendChild(script);
}; //Window OnLoad
</script>
4. Preview or Publish = Done!
Example: http://musebackstretch.businesscatalyst.com/index.html -
SAP R/3 4.6c online help from html help CD
Hi :
I copied SAP R/3 4.6c help into SAP Server .
How to access this help from online SAP screen .
Please help for this .
Thanks in advance,
ChimsiHi,
Wouldn't it be more helpful to use help.sap.com instead?
Eddy -
Network Magic v 5.5 I cannot access the online help from the links within NM
When I try to access the online help from any link button in NM V5.5 including the main help > Help center > Network magic help, the browser will open and resolve address , Status bar will state done but I have a blank page.
The URL in the address bar is
http://go.purenetworks.com/redir/webhelp/nm/_cover.htm?pn=nm&a=5.5.9195.0&as=0&ad=2&bt=shp&b=Pure&dc=Pure0.LinksysRouterSetup&dt=OLN&k=1611759616&ct=cisco&ag=d9429c0fe2fd40b9&g=d04c74e28eb95300%2Cb2610a4f03b2f988&lcid=1033&ulcid=2057&am=99&it=upgrade
I am running windows 7 Ultimate, have tried
Firefox 3.6 and
IE 8.0 -- I have put the Url into the trusted zone and the web page will again show up as done and status bar shows trusted zone
I have tried all this with my Firewall & AV (Kaspersky Internet Security 2010) both on and disabled
NB The "ask linskys link works" as does the "community forums"
The Main help > Help center >Getting Started also works.
( I am running the WRT610N Router set up by Network Magic)
Many ThanksI've seen this too use http://support.networkmagic.com
Mikro the Owner of the Linksys BEFCMU10_V4-UG Modem & The BEFSR41v4 Router. -
Why can't I get help from you people? Thunderbird is installed, but not working.
I carefully followed the directions for installing Thunderbird. I am running WinXP pro. Thunderbird is there but not functioning. I am 78 years old and I need help from you re: install. I am not going to pay $$$$$to get a computer tech to come to my home and install Thunderbird. I had no trouble installing Firefox, but Thunderbird is an absolute drongo. Please call me at xxx-xxx-xxxx or email me a number to call. I need human help. PLEASE! Thunderbird just sits there but gets no mail.
Regards, SaraThis appears to be your first post here and you have not provided much detail to work with. This is the Thunderbird support forum. No one is going to call or email you other than the spammers that get your info that you posted in a public forum.
-
Overnight my contact list went from 1492 to 52. With help from Apple I retrieved the missing contacts using Time Machine. The problems is that the contacts are not in groups as they used to be. Any suggestions? I really need them grouped for business reasons.
Also, there are no longer pictures associated with each contact.
thanks for any help anyone can give me getting contacts back into the groups that I had established. By the way, the group names are still there, but they are all empty.
thanks,
SparkyWhat Mac do you have, with what version of OS X?
-
HI Guru's
How do I call a R/3 search help from SRM? I want to work it the same way as it works in R/3.
Thanks,
KrishnaHello,
Please check the following notes:-
171117
550052
642202
673390
656633
746788
708580
693795
712701
725247
I hope this will definately help.
Thanks and regards,
Gaurav
Maybe you are looking for
-
Hp 6500 officejet 6500 e709n series won't print
This printer printed a few documents, but, after one week, it would not print, I just get an error message on the screen and my computer has a popup that says "document failed to print". Officejet 6500 e709n series.
-
Deploying custom templates only shows first template
Hi guys, I'm having an issue deploying custom templates. I have followed the steps outlined here (http://technet.microsoft.com/en-us/library/cc178976.aspx) but when I open up Word/New I see the "CompanyName" under custom templates but when I open it
-
Cannot find this menu in my Maps???
I've seen this screen on official nokia pages: I'm using ovi maps v3.01 and i cant find anything like this... please help... thanks...
-
How can i save it permanently to my iPhone when everytime I sync i cant access it ? When i use home sharing as soon as the wifi is down it doesnt work ? I need it to be saved to my phone and I can use it on the go ! I need help, its killing me !!!!!!
-
Converting to LWAPP (Aironet 1231)
I currently manage 115 Aironet AP1231-G-A-K9 WAP's via WLSE. We had a site assessment done, and they are recommending two wireless controllers for management with Cisco 3500 WAP's with clean air technology. I agree with recommendations, but I do not