Bsod on cs4 install

I'm running windows 7 ultimate and I'm trying to install the trial of cs4. every time i start the install I get the bsod almost immediatly. idk what to do. if someone has a similar problem or knows how to fix this problem please reply.

Welcome to the forum.
BSOD is a serious occurrence, and probably indicates a much larger problem. This ARTICLE will give you tips on tracking down "clues" on what is happening just before the BSOD. It was written with Premiere in mind, but applies to any program/system crash. Be sure to follow ALL links in any warning, or error message. Also, you might want to switch OFF Reboot on Error (or similar syntax), so you can get time to read the full extent of the BSOD. Also, upon reboot, you should get a series of messages, with one offering a link to MS. What did that link tell you? Often, BSOD's are caused by device drivers, but the MS Help screen seldom identifies which one. At the bottom of the linked article is "The Case of the Unexplained," that will give you some tools and tips on tracking things down.
Good luck,
Hunt

Similar Messages

  • Adobe CS4 Install freezes at "Preparing to Install..." on Vista

    I am trying to install Adobe CS4 for the first time (it's not an upgrade) from DVD on Vista (all the latest updates are installed; Windows Update has nothing more to do). The Vista install is also pretty fresh, although I have installed a few things. The CS4 install starts and I get a "Preparing to Install..." message. But, that's it. It's stuck there indefinitely.
    I have disable my antivirus software, tried to use AdobeSupportAdvisor (but it doesn't seem to be able to determine that an install has been attempted), and been working through everything on
    http://kb.adobe.com/selfservice/viewContent.do?externalId=kb404127&sliceId=1
    to no avail. I get the same behavior no matter what I try.
    Any suggestions are very much appreciated.

    OK, I got it to install. I think what happened was really simple and stupid on my part, but I can't really say for sure because I didn't get any such info from the CS4 install program. I had an upgrade version and I was installing on a new computer. So, possibly the CS4 installer was looking for a previous version.
    Anyway, here's what I did:
    1. I noticed that in spite of the install not appearing to get anywhere, there were some CS4 components installed. I removed them via the usual Control Panel / Add/Remove Programs routine.
    2. Install CS3.
    3. Install CS4.
    Worked just fine.
    So, my only suggestions are:
    1. If you have an upgrade version, install the version from which you are upgrading first.
    2. If you had this install failure, it might help if you uninstall whatever got installed during the failed attempt(s).
    Simple and obvious, I suppose, but it did get the install working.

  • I have cs4 installed on my old computer, i have since lost the disk and serial #s. Is there any way to recover this information and install the programs on my new computer?

    I have cs4 installed on my old computer, i have since lost the disk and serial #s. Is there any way to recover this information and install the programs on my new computer? I used my old computer for college and haven't used it in awhile, now I have a job that can benefit from having those programs. I was wondering if ADOBE keeps records or something to where I can download the programs on my new MacBook and use my old serial #s.

    Find your serial number quickly
    Download CS4 products
    Mylenium

  • Strange yellow color cast after CS4 install

    I just ran into a strange problem helping a friend install PS CS4. Everything seemed to go fine, but now all of a sudden his images are displayed with a strong yellow tint. I don't mean a slight color cast, I mean a STRONG yellow tint. The images appear the same in Photoshop, the Bridge, and even ACR. I re-calibrated the monitor (Gretag McBeth) and generated a new profile just be sure, but that wasn't it. The same images viewed in other applications (Picassa, opened in a browser, etc.) on the same computer display normally. This appears to be only Photoshop related. What's also interesting is that CS3 now exhibits the same problem after the CS4 install.
    I reviewed all the color settings and workflow, and nothing is out of the ordinary. The Nikon raw images were imported via ACR, and opened in Photoshop with ACR workflow options set for 16 bit/Adobe RGB. Photoshop working space is Adobe RGB. I also installed the 11.0.1 update. But here are what may be a couple of clues. First, it's not just the image files that look bad. The colors are awful in the color picker in the toolbox. The entire color picker slider is almost all yellow and orange. And here's another good one. We tried importing some new raw images via the photo downloader in Bridge. With the downloader in Advanced mode, the image previews before download show the same yellow cast. But after I click the Get Photos button, the image colors appear correct as they flash on for a couple of seconds while being downloaded. This has got to be a big clue for someone. What's different about how the image is displayed during that two second preview during the actual download?
    The PC hardware is a 3.2Ghz Pentium 4 Dell tower (2G ram) running XP Pro w/SP3, with a nVidia GeForce 7800 graphics card, and the screen resolution is 1024x768. I'm thinking maybe a graphics card issue or corrupted system profiles, but I'm a Mac and he's a PC so my PC troubleshooting skills are limited.
    Has anyone else seen a problem like this before?? Any ideas? Thanks!
    Ed

  • Have CS4 installed on new mac, but can't open any programs. Know Java6

    I have CS4 installed on a new mac. It asks me to install JAVA 6. Java 6 is no longer available and in have installed Java 8, but it still asks for Java 6. I paid $1400 for CS4 4 year ago and really only use Acrobat. I don't want to buy it over again. I haven't been able to get support on this problem.

    check if others have been successful, http://roaringapps.com/apps:table

  • Contribute CS4 Install error - ccmenu.xml

    Hi,
    Trying to get Contribute CS4 installed for a user here at Notre Dame. It keeps telling us that:
    "Contribute encountered problems while constructing the menus from the current ccmenus.xml file.
    Please delete the current ccmenus.xml file and rename menus.bak to ccmenus.xml."
    We do this, and that same error comes up every time. We uninstall and reinstall and that error comes up every time.
    Anyone seen this?
    The machine is a new iMac running Mac OS X 10.6.2. It does not have any CS3 products installed just CS4.
    thanks,
    bart loeb, notre dame

    Seems like an issue with media files, some of the content might be missing. Try to download CS4 from the below website but make sure to follow the "Very Important Instructions", mentioned on that website, carefully before downloading it.
    http://prodesigntools.com/download-adobe-cs4-and-cs3-free-trials-here.html

  • CS4 installed on new computer

    Own CS4 Design Premium.  Just got new computer.  All else but ID working.  Says licensing has stopped working.  Error Code 5.  Anyone have any help to offer. CS4 is no longer supported by tech support.

    What operating system? If you just got a new Mac with Mavericks (10.9.2), there's no guarantee you'll be able to get CS4 installed.
    You may have tried to use Migration which won't work. You might have a chance if you could do a clean install from your original discs.

  • I have CS4 installed on two computers however none of the applications will now open on one machine and I get the error message 150:30

    I have CS4 installed on two computers however none of the applications will now open on one machine and I get the error message 150:30

    Your best bet is probably to start over by cleaning off the old software with the Adobe Cleaner tool:
    Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
    Then reinstall from your original media, or download it here:
    http://www.adobe.com/downloads/other-downloads.edu.html

  • With CS5 upgrade installed, do I need to keep CS4 installed as well?

    I upgraded from CS4 to CS5 by purchasing the "upgrade" package.
    In my applications I now have CS4 and CS5 installed and they show as two separate applications.
    What I would like to know is
    1. Do I need to keep CS4 installed for CS5 to work, as it is only an "upgrade"?
    2. When I buy a new computer, do I have to install CS4 on it before installing the "upgrade" version of CS5?
    Many thanks for your help.

    I must admit that comes as a bit of a surprise.
    I had presumed that the "upgrade" version of CS5, being so much cheaper to buy than the full original, would check your hard drive to make sure you actually had bought a legal copy of CS4.
    Does that mean there is no difference between the "upgrade" and the full price installation discs?
    By the way, I know I'm old sometimes can't find something even when it's right under my nose, but is there a "LOG OUT" button anywhere on this forum?

  • Cs6 upgrade is installed, do I need to keep CS4 installed?

    cs6 upgrade is installed, do I need to keep CS4 installed?

    Stephen Roach III wrote:
    I,m under the impression that CS4 must be installed on the machine for a 'upgrade to' version of CS6 to be successfully installed.
    Is this assumption wrong?
    No, but it's not essential since upgrades include the full program code. The serial number differentiates a full version from an upgrade.
    If the CS6 ugrade installer cannot find an earlier qualifying version already installed, it will ask you to enter the serial number for an earlier qualifying version instead. You then enter an earlier version qualifying serial and the CS6 installer will continue.
    When I'm installing (or reinstalling) Creative Suites where the latest version is an upgrade version, I only ever install the latest version - even if no Adobe software was previously installed on that particular computer.

  • With CS4 installed already, can I uninstall InDesignCS3 without affecting the CS4 suite?

    With CS4 installed already, can I uninstall InDesignCS3 without affecting the CS4 suite?
    InDesignCS3 was downloaded from the internet. CS4 suite was installed from CDs. Both are currently on my computer. How can I uninstall InDesignCS3?

    Just use the add/remove programs feature in the control panel, but I would strongly suggest that you don't do this. If you ever need to supply a CS3 file you'll be sorry you uninstalled it.
    Bob

  • CS4 Install Tips - OS X

    I could not get Fireworks CS4 to successfully run on my Mac
    running 10.5.5. After several install/uninstall/reboot/repair
    permissions cycles, trying to install it under a different user,
    installing it after a Safe Boot and pretty much everything short of
    having a witch doctor attend to the computer, I finally got it to
    install and run without failing with the "AMT Subsystem Failure"
    message.
    If you have installed the Fireworks CS4 beta it is important
    that you use the uninstaller to remove it before attempting an
    upgrade.
    Being an old Mac hand I did what a lot of us do: I dragged
    the beta to the trash and emptied it. I deleted the old prefs file
    and thought I was done. However, after spending hours trying to get
    the new CS4 installed I finally downloaded Adobe's CleanScript and
    ran it. It found the beta uninstaller (!) and asked me if I'd like
    to run it. I did. After rebooting (to be safe) I tried again to
    install the new CS4.
    It worked just fine.
    So if you have installed the beta make sure you use the
    uninstaller to remove it before attempting to install the new CS4.
    Hope this saves someone some trouble.

    You can install on a second computer simply copy the install files from your DVD to a USB drive.  Acrobat 9 itself may function but you may face some difficulties with PDF creation under 10.8.

  • CS4 install without disk

    I have CS4 installed on a dead laptop and can't find my install disk.  How can I get it to install on a new computer?  I have serial number...

    Direct Download Links for Adobe Software
    Mylenium

  • Deactivating CS4 on failing computer running XP, upgrading to new computer running Win7.  I have CS4 installed. Do I deactivate on each product or will a single deactivation cover all?

    I have CS4 installed on this computer but computer is failing and I will have to get a new one. Do I deactivate on each product or will a single deactivation cover all? Also, I see that all products are now on the cloud so is CS4 still an active product?

    With any Suite, launch one app (e.g. Photoshop) and click Help > Deactivate to deactivate the entire suite.
    CS4 has not been an active product since CS5 shipped in 2010. We've since had CS5, CS6, CC (subscription only) and now CC 2014 (subscription only).
    Also, it depends on what you mean by active. You can still download, install and activate CS4.
    However Adobe no longer does any work on CS4 and no longer supports it via Customer Service Chat etc.

  • Bonjour, j'ai la CS4 installée sur un PC, et je dois changé d'ordinateur et j'hésite entre encore un PC ou un MAC, et je voudrais  savoir si ma version de CS4 peut s'installer aussi sur un MAC . Merci pour votre réponse

    Bonjour, j'ai la CS4 installée sur un PC, et je dois changé d'ordinateur et j'hésite entre encore un PC ou un MAC, et je voudrais  savoir si ma version de CS4 peut s'installer aussi sur un MAC . Merci pour votre réponse

    No.  Votre numéro de série est pour le PC uniquement, pas le Mac. Il n'est pas possible d'échanger une licence CS4 PC pour une licence de Mac.
    Gène

Maybe you are looking for

  • I want to know if i pre-order the new ipod,when can i get it?

    i have pre-ordered a new ipod touch last week.And i did not see APPLE took the money from my credit card. i wonder if oreder it successfully.And it said it can ship in Oct, I want to know when.DATE

  • Image control runtime creation issue

    I am having problems getting the Image control to actually display the image I specify in the source property. The Image control is created in actionscript at runtime based on XML returned by an HTTPService request. I have a canvas that I want to pop

  • How to exp/imp both diff character set tables between in DB1 and DB2?

    In the Solaris 2.7 ,the oracle 8i DB1 has NLS_CHARACTERSET ZHS16CGB231280 and NLS_NCHAR_CHARACTERSET ZHS16CGB231280 character set. In other linux7.2 system ,the oracle 8i DB2 is install into the NLS_NCHAR_CHARACTERSET US7ASCII and NLS_CHARACTERSET US

  • Variant Configuration: Stock must be dispalyed on the charachteristics

    Dear All, I need your help to resolve the query in variant configuration. I have maintained the characteristics & class for the raw material. I have done all  the make to order process from So to Migo And it successfully run but stock is displayed on

  • Mail not working yosemite (google) tried everything... help

    the mail is not working ... i have yosemite i get a triangle with exlamation mark however mails do get sent, even though show in outbox to be sent. i have reset account in preferences, deleted keychains etc other mail service apps work, but i would l