BSOD-Problem ha20x22k.sys X-Fi WinXP SP3 multicore-processor

Hi @all,
I already read around this forum & know that the bluescreens in connection with ha20x22k.sys only happen on WinXP SP3 machines with multicore processors. There seem to be a beta driver XFTI_PCDRVBETA_2_7_0005.zip that fixes this issue. There are several postings about it here in this forum and Google finds more elsewhere.
Only there is no download link.
Where can I get XFTI_PCDRVBETA_2_7_0005.zip?
Sincerely - Harry Zingel - www.zingel.de

Hi!
I had similar problems with a older Creative Cards. This ist PCI-IRQ Routing problem most caused by a Bios that is not 00% ACPI compatible, even if the manufracturer say it is 00% compatible.
I solved this with a Bios upgrade or before is did the Bios upgrade i changed the ACPI kernel to a MPS kernel (i wont suggest that because if something goes wrong, it is not easy to repair the OS and needs much OS-internal-related knowledge to do this).

Similar Messages

  • WinXP SP3 and Boot Camp 2.1 | Win BSOD ATI card not correct!

    Configuration:
    Loaded and OEM WinXP SP3 on an iMac with Boot Camp V2.0. All worked correctly.
    Immediately after Boot Camp 2.0 completed installed Boot Camp V2.1. All worked correctly.
    Problem:
    Working in Windows the OS triggered a BSOD (Blue Screen of Death) after the OS was up for approximately 10 minutes. This was a repeatable problem.
    Investigation:
    Downloaded Windows DeBug utility to analyze the crash dump files from the BSODs. For reference on how to read the Windows dmp files and how to use Windows DeBug utility see the following link.
    http://www.networkworld.com/news/2005/041105-windows-crash.html
    Determined that the fault was caused by a driver file ati2mtag.sys.
    Checked the version with the latest availble from the manufacturer ATI. It was the most recent version
    Analysis:
    In Windows right click on My Computer, go to Properties.
    Go to the Hardware tab in Properties, and then to the Device Manager, drop down the Display adapters. The model shown was a Mobility Radeon HD 2600 XT!
    This is WRONG, the video card in this iMAC is a ATI Radeon HD 2600 Pro.
    Conclusion:
    Windows and or Boot Camp loaded the incorrect video drivers for the video card.
    Solution:
    1. Download and install Dot Net 2.0 because the ATI driver installer requires this level to install required drivers. The download is available at the following link.
    http://www.microsoft.com/downloads/details.aspx?FamilyID=0856EACB-4362-4B0D-8EDD -AAB15C5E04F5&displaylang=en
    2. Go to ATI driver support page and download the latest Catalyst driver for 32-bit XP.
    http://game.amd.com/us-en/drivers_catalyst.aspx?p=xp/radeonx-xp
    3. After download, launch the installer, just proceed with the installer until it gets to the point where it pops up an error message saying that the installer could not find a suitable driver for your hardware.
    4. Close out the installer and right click on My Computer, go to Properties.
    5. Go to the Hardware tab in Properties, and then to the Device Manager, drop down the Display adapters, and you should see Mobility Radeon HD 2600 XT, this is incorrect.
    6. Right click on the video card and choose Update Driver, you will be now see a Hardware Update Wizard.
    7. It says Can Windows connect to Windows Update to search for software? Select No, not this time, and click Next... Now you should see What do you want wizard to do? Select Install from a list or specific location (Advanced), and click Next.... On the next page select Don't Search. I will choose the driver to install, click Next....
    8. On the lower right corner of the Wizard, Have Disk... Now click Browse and go to C: > ATI > Support > Driver, and select the inf file in there, click Open.
    9. Scroll through to locate and then select ATI Radeon HD 2600 Pro, and install that, you might get a message saying this driver isn't certified, ignore it and continue.
    10. After completion, reboot.
    My system is now running correctly, no more BSOD's!

    hmm, is it possible that the same problem of the imac is mine on the macpro with 2 ati 2600 cards?
    from where do you know that the recginized xt card is wrong and it must the pro version? cause of the 256mb to 512mb at the offical xt version?
    plz take a look at my problem thread:
    http://discussions.apple.com/thread.jspa?threadID=1686327
    thx alot

  • Problem opening Canon 6D RAW even after upgrade today to PS CS6, WinXP-SP3

    Givens: PS CS5>CS6 upgrade via $199USD download today, Non-CC upgrade. OS: WinXP SP3, camera: Canon 6D RAW (.CR2 files) and prefer to work on RAWs via Bridge.
    Main goal: view Canon 6D files in Bridge, do adjustments, open via ACR into PS CS6 for further work.
    My fav workflow for photos is: Bridge>ACR>PS. Just got a Canon 6D camera. So I updated to PS CS6 today and I did go through PS CS6 menu: help>update mechanism for all available updates, which was one round of ACR (and Bridge) updates, no more were offered. That brought ACR from v7.0.0.308 to v7.1.0.354--still could not see Canon 6D RAW files.  I went to Adobe.com and did manual download for ACR/DNG 7_3 but it did not enable Bridge to see my new camera files nor could I open the 6D .CR2 files in PS. Got PS error message about not recognizing filetype, update ACR, etc (which of course I just attempted). (Seems as through PS and Bridge did not know the ACR/DNG 7.3 "existed" IF that is a capability).
    Then I tried to install ACR 8.7 from the "Fix your 6D RAW problems page" and got error messages in PS CS6 (perhaps bc I am on 32-bit system). Decided to start from scratch; uninstalled PS CS6 upgrade.
    Secondary issue is: Now I have uninstalled PS CS6 and done System Restore to the point just after I downloaded PS CS6 upgrade. I want to reinstall but the installer fails. Support chat told me to download PS CS6 Upgrade again (doing that now), then reinstall.
    Solve: Main problem: Be able to work on Canon 6D RAW through Bridge and ACR (prefer NOT to workaround with DNG if possible) At time of writing, as mentioned, I am downloading PS CS6 upgrade again, then plan to reinstall. If that works, then I need steps to update ACR so that I can work on 6D RAWs through Bridge and ACR. Please know that going through Photoshop's Help>Update mechanism does NOT seem to work. Do I need manual updates? If so, please direct me to the correct ones and order of procedure to execute this upgrade successfully.
    Many thanks, Paul

    Yammer, thanks for the info about Camera Raw 8.3--that is my goal to load PS CS6 Upgrade and update to Camera Raw 8.3  Currently, I am having problems installing PS CS6 upgrade after uninstall. I have used Adobe CC Cleaner several times. It seemed to help, and the installer proceeded further with next try. Then I looked and there was no PS CS6 icons. I have done system restore also several times and am about to try again. It seems that my original PS CS6 upgrade installed, but when I tried to load ACR update, problems arose. Is there a way to remove recent version Camera Raw remnants from my computer. There is no Photoshop CS6 folder and further none for the CameraRaw.8bi for PS CS6. One possible clue: Yesterday I did two upgrades: 1) PS CS4>CS5 via box, then 2) PS CS5.CS6 on-line download non-CC. In one round of update, I saw that PS CS*5* Extension Manager failed to update. Seems unrelated but mentioned here for thoroughness.
    Running ACR 8.3 in XP SP3 would be most useful and timely today as I have work to do. Many thanks, Paul

  • DESPERATE HELP PLS: WinXP, SP3: Creative Console and other elements crashing

    LDESPERATE HELP PLS: WinXP, SP3: Creative Console and other elements crashingRHi all. Hoping someone out there can help; I've been going around in circles for far too long on this.
    Exec summary:
    WinXP, SP3, Audio finally is working, Creative Console launches but crashes consistently. Diagnostics fails, on-screen could not install.
    System:
    WinXP, SP3
    Story
    I had an original X-Fi card that came with my Dell XPS70 3 years ago. Working perfectly, until I upgraded to WinXP, SP3 (from SP2).
    BAM - lots of BSODs, always in ha20x2k.sys. Many times, all networking would just stop, and the BSOD would happen when shutting down the computer. Networking would fail 00% everytime I watched any kind of video (news, youtube, whatever).
    Couldn't find more current drivers, bought X-Fi ExtremeGamer card from Frys. Could not get this to install off the package CD, new card was not recognized by Windows. Install would always hang on "On-Screen display" (I have a dual monitor system - should that matter?)
    Eventually, downloaded more current drivers and console app from the Creative website and got audio working. Console will now launch but the moment I try to change something in the EQ panel, the console crashes, 00% of the time. Other Creative apps (e.g. diagnostics) fail with this error:? "The audio device supported by this application may not be present or may be operating in an unsupported mode..."
    I haven't been able to "cleansweep" my system, the link in this (Creative) forum is broken.
    REALLY hoping someone can help get this working... Have spent 2 days away from business to try to make this work properly, and am out of things to try.
    Thanks,
    Jerry

    I should add - I have NO interest in gaming, just looking for high-end audio...

  • D20 + SATA ONLY + WINXP SP3 32BIT

    Hi all,
    Currently testing a D20 for the business and cant get the D20 to run as a SATA drive only. Currently its spinning up the Marvell controller with a 500GB drive in.
    Have tried going into the BIOS and disabling the RAID controller but then I cant seem to use the HD as just a SATA drive.
    The only joy I've had is plugging in a floppy disc with 32bit Marvell controller drivers booting up with WinXP 32bit, as it going through install hit F6 to install controller drivers then once I hit continue to get back to the setup/format drives I get a blue screen of death. The strange thing is if I use our WinXP SP3 32bit Microsoft licensing copy which it MUST be installed with I get this BSOD but if I through in a Dell WinXP SP3 32bit OS disc I can install the operating system no problem at all!
    All I want to do really is disable the RAID controller (somehow) use SATA single drive only and install WinXP SP3 32bit using our Microsoft Licensing copy with out it blue screening!!
    Any help would be fantastic!
    Cheers,
    Ant
    Solved!
    Go to Solution.

    Hi all,
    Not to worry I have managed to work it out
    For all thoses that need to know too I'll post an update of instructions on how to do it in a bit after I have successfully installed the operating system
    Kind regards,
    Ant

  • BSOD with NVSNPU.SYS

    I also having BSOD involving NVSNPU.SYS. on a Neo4 Plat.
    I installed another NIC because I'm testing Darwin x86 and the nVidia NIC is not recognized by Darwin, couriously I disable the nVidia NIC on WinXP and enable the SMC 1211TX (Realtek 8139 compatible) and edonkey2000 found more sources and have less problems with the Realtek 8139 NIC driver, with the nVidia NIC I have a lot of LowID and diconnection from servers.
    I will try the new nVidia drivers, also I'll try the onboard Gigabit NIC.
    Ciao,
    Alejandra.
    MSI Neo4 Platinum
    AMD 64 3500+
    MSI GeForce 6600 256
    1 GB (2x512 Kingston sticks)
    4 Maxtor 80GB SATA in RAID
    Quantum 40GB on Primary IDE Master
    Pioneer A07 on Secondary Master
    LiteOn LTR52327S on Secondary Slave
    Sound Blaster Audigy Platinum Card
    AverMedia TV98 Stereo Card
    SMC 1211 TX NIC
    WinXP SP2

    Hi,
    Was there ever a solution found for this? I'm getting the same BSOD using the
    nidmgpib.sys driver (v1.5).
    The company we're working with says upgrading is not a quick fix, as they have
    a lot invested in this driver.
    Attached is the dump file.
    Thanks,
    Jeff
    Attachments:
    DumpAnalyzed.TXT ‏10 KB

  • Windows 8.1 BSOD problem

    Hello i have an ASUS S400 CA ultrabook and my BSOD problems have started after automated upgrade from windows 8 to windows 8.1 Here is the latest dump file. BSOD problem says "DRIVER_IRQL_NOT_LESS_OR_EQUAL(athw8x.sys)"
    I have downloaded driver from the ASUS website but the problem remains unsolved. Please, give me some advice, thank you in advance 
    https://dl.dropboxusercontent.com/u/79149617/042314-24390-01.dmp

    Hi,
    The attached DMP file is of the DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1) bug check.
    This indicates that a kernel-mode driver attempted to access pageable memory at a process IRQL that was too high.
    A driver tried to access an address that is pageable (or that is completely invalid) while the IRQL was too high. This bug check is usually caused by drivers that have used improper addresses.
    3: kd> k
    Child-SP RetAddr Call Site
    ffffd000`2161c3d8 fffff803`78f627e9 nt!KeBugCheckEx
    ffffd000`2161c3e0 fffff803`78f6103a nt!KiBugCheckDispatch+0x69
    ffffd000`2161c520 fffff800`0272571f nt!KiPageFault+0x23a
    ffffd000`2161c6b0 ffffc000`00000000 athwbx+0x9671f
    ffffd000`2161c6b8 fffff803`7918a223 0xffffc000`00000000
    ffffd000`2161c6c0 ffffe000`6666744e nt!FsRtlTeardownPerStreamContexts+0x53
    ffffd000`2161c730 ffffc000`03ba6010 0xffffe000`6666744e
    ffffd000`2161c738 fffff800`00db4dd2 0xffffc000`03ba6010
    ffffd000`2161c740 fffff800`00cdbe24 Ntfs!NtfsDeleteFcb+0x460
    ffffd000`2161c7c0 fffff800`00000002 Ntfs!NtfsTeardownFromLcb+0x1f4
    ffffd000`2161c850 fffff800`00000001 CI!_guard_check_icall_fptr <PERF> (CI+0x2)
    ffffd000`2161c858 fffff800`029692f0 CI!_guard_check_icall_fptr <PERF> (CI+0x1)
    ffffd000`2161c860 ffffe000`00000000 athwbx+0x2da2f0
    ffffd000`2161c868 fffff800`029685d0 0xffffe000`00000000
    ffffd000`2161c870 fffff800`02968550 athwbx+0x2d95d0
    ffffd000`2161c878 ffffd000`2161c890 athwbx+0x2d9550
    ffffd000`2161c880 ffffd000`2161c951 0xffffd000`2161c890
    ffffd000`2161c888 ffffd000`2161c900 0xffffd000`2161c951
    ffffd000`2161c890 ffffe000`01581098 0xffffd000`2161c900
    ffffd000`2161c898 00000000`00000000 0xffffe000`01581098
    ^^ athwbx.sys is the Qualcomm Atheros AR9485WB-EG Wireless Network Adapter. In every case I've dealt with this driver, the manufacturer never actually had the latest version, and downloading this driver always helped -
    http://www.atheros.cz/atheros-wireless-download.php?chipset=61&system=7
    ^^ Atheros' website can be kind of confusing to say the very least, so let me know if you need help downloading it.
    Regards,
    Patrick
    “Be kind whenever possible. It is always possible.” - Dalai Lama

  • On updating from FF3.5.10 to FF3.6.6; No session-restore option, no menu drop-down "Recently bookmarked" list. (winXP sp3)

    On updating from FF3.5.10 (good :-) to FF3.6.6 (bad :-( ): No session-restore option; no menu drop-down "Recently bookmarked" list. (Sys=winXP sp3)
    1. can a non-techy fix this? :-(
    2. how do I recover to FF3.5.10? - I liked it very much ! - thanks to all at Mozilla :-)

    Make sure that you not run Firefox in [[Private Browsing]] mode.
    In Private Browsing mode some menu items are disabled (grayed) and some features like visited links and others are disabled and not working.
    You are in Private Browsing mode if you see "Tools > Stop Private Browsing".
    See [[Private Browsing]] and http://kb.mozillazine.org/Issues_related_to_Private_Browsing

  • Having BSOD problem

    Hi Microsoft professional team,
    I am using Windows  8.1 pro and I keep having the BSOD problem everyday. I uploaded the memory dump file to OneDrive.
    Can you give me a hand on this to find out where the problem is?
    Many Thx.
    Daniel

    DMS
    Driver verified and Related to ZoneAlarm Firewall Driver.  I would remove it and use the built in defender in its place
    Microsoft (R) Windows Debugger Version 6.3.9600.17298 AMD64
    Copyright (c) Microsoft Corporation. All rights reserved.
    Loading Dump File [C:\Users\Ken\Desktop\New folder\031215-6609-01.dmp]
    Mini Kernel Dump File: Only registers and stack trace are available
    ************* Symbol Path validation summary **************
    Response Time (ms) Location
    Deferred SRV*e:\symbols*http://msdl.microsoft.com/download/symbols
    Symbol search path is: SRV*e:\symbols*http://msdl.microsoft.com/download/symbols
    Executable search path is:
    Windows 8 Kernel Version 9600 MP (8 procs) Free x64
    Product: WinNt, suite: TerminalServer SingleUserTS
    Built by: 9600.17668.amd64fre.winblue_r8.150127-1500
    Machine Name:
    Kernel base = 0xfffff801`0b61a000 PsLoadedModuleList = 0xfffff801`0b8f3250
    Debug session time: Wed Mar 11 13:03:15.527 2015 (UTC - 4:00)
    System Uptime: 0 days 0:02:12.192
    Loading Kernel Symbols
    Loading User Symbols
    Loading unloaded module list
    * Bugcheck Analysis *
    Use !analyze -v to get detailed debugging information.
    BugCheck A, {ffffcf8094653000, 2, 1, fffff8010b702dde}
    *** WARNING: Unable to verify timestamp for vsdatant.sys
    *** ERROR: Module load completed but symbols could not be loaded for vsdatant.sys
    Probably caused by : vsdatant.sys ( vsdatant+13bc0 )
    Followup: MachineOwner
    0: kd> !analyze -v
    * Bugcheck Analysis *
    IRQL_NOT_LESS_OR_EQUAL (a)
    An attempt was made to access a pageable (or completely invalid) address at an
    interrupt request level (IRQL) that is too high. This is usually
    caused by drivers using improper addresses.
    If a kernel debugger is available get the stack backtrace.
    Arguments:
    Arg1: ffffcf8094653000, memory referenced
    Arg2: 0000000000000002, IRQL
    Arg3: 0000000000000001, bitfield :
    bit 0 : value 0 = read operation, 1 = write operation
    bit 3 : value 0 = not an execute operation, 1 = execute operation (only on chips which support this level of status)
    Arg4: fffff8010b702dde, address which referenced memory
    Debugging Details:
    WRITE_ADDRESS: GetPointerFromAddress: unable to read from fffff8010b97d138
    unable to get nt!MmNonPagedPoolStart
    unable to get nt!MmSizeOfNonPagedPoolInBytes
    ffffcf8094653000
    CURRENT_IRQL: 2
    FAULTING_IP:
    nt!MmBuildMdlForNonPagedPool+ee
    fffff801`0b702dde 48890c17 mov qword ptr [rdi+rdx],rcx
    CUSTOMER_CRASH_COUNT: 1
    DEFAULT_BUCKET_ID: VERIFIER_ENABLED_VISTA_MINIDUMP
    BUGCHECK_STR: AV
    PROCESS_NAME: System
    ANALYSIS_VERSION: 6.3.9600.17298 (debuggers(dbg).141024-1500) amd64fre
    TRAP_FRAME: ffffd0014eba6290 -- (.trap 0xffffd0014eba6290)
    NOTE: The trap frame does not contain all registers.
    Some register values may be zeroed or incorrect.
    rax=ffffef8094703000 rbx=0000000000000000 rcx=00000000b8e00000
    rdx=fffff6e7c04a3818 rsi=0000000000000000 rdi=0000000000000000
    rip=fffff8010b702dde rsp=ffffd0014eba6420 rbp=0000007ffffffff8
    r8=00000067c04a3818 r9=ffffcf8094652fd0 r10=0000000000000000
    r11=fffff6fb73e02518 r12=0000000000000000 r13=0000000000000000
    r14=0000000000000000 r15=0000000000000000
    iopl=0 nv up ei ng nz ac po cy
    nt!MmBuildMdlForNonPagedPool+0xee:
    fffff801`0b702dde 48890c17 mov qword ptr [rdi+rdx],rcx ds:fffff6e7`c04a3818=78010b8e00000000
    Resetting default scope
    LAST_CONTROL_TRANSFER: from fffff8010b7764e9 to fffff8010b76a9a0
    STACK_TEXT:
    ffffd001`4eba6148 fffff801`0b7764e9 : 00000000`0000000a ffffcf80`94653000 00000000`00000002 00000000`00000001 : nt!KeBugCheckEx
    ffffd001`4eba6150 fffff801`0b774d3a : 00000000`00000001 0000000f`ffffffff ffffd001`4eba4000 ffffd001`4ebaa000 : nt!KiBugCheckDispatch+0x69
    ffffd001`4eba6290 fffff801`0b702dde : ffffd001`4eba6c60 ffffcf80`94416ac0 00000000`00000000 fffff800`b6936bc0 : nt!KiPageFault+0x23a
    ffffd001`4eba6420 fffff800`b6936bc0 : ffffe001`2e27d580 ffffd001`4eba6600 ffffcf80`8f6bedf0 00000000`00000000 : nt!MmBuildMdlForNonPagedPool+0xee
    ffffd001`4eba6440 ffffe001`2e27d580 : ffffd001`4eba6600 ffffcf80`8f6bedf0 00000000`00000000 00000000`00000000 : vsdatant+0x13bc0
    ffffd001`4eba6448 ffffd001`4eba6600 : ffffcf80`8f6bedf0 00000000`00000000 00000000`00000000 00000000`00000040 : 0xffffe001`2e27d580
    ffffd001`4eba6450 ffffcf80`8f6bedf0 : 00000000`00000000 00000000`00000000 00000000`00000040 ffffe001`2e27d680 : 0xffffd001`4eba6600
    ffffd001`4eba6458 00000000`00000000 : 00000000`00000000 00000000`00000040 ffffe001`2e27d680 ffffd001`4eba6600 : 0xffffcf80`8f6bedf0
    STACK_COMMAND: kb
    FOLLOWUP_IP:
    vsdatant+13bc0
    fffff800`b6936bc0 ?? ???
    SYMBOL_STACK_INDEX: 4
    SYMBOL_NAME: vsdatant+13bc0
    FOLLOWUP_NAME: MachineOwner
    MODULE_NAME: vsdatant
    IMAGE_NAME: vsdatant.sys
    DEBUG_FLR_IMAGE_TIMESTAMP: 538e623f
    FAILURE_BUCKET_ID: AV_VRF_vsdatant+13bc0
    BUCKET_ID: AV_VRF_vsdatant+13bc0
    ANALYSIS_SOURCE: KM
    FAILURE_ID_HASH_STRING: km:av_vrf_vsdatant+13bc0
    FAILURE_ID_HASH: {cd69ac10-8557-151b-0942-e160e96e9310}
    Followup: MachineOwner
    0: kd> lmvm vsdatant
    start end module name
    fffff800`b6923000 fffff800`b69b8000 vsdatant T (no symbols)
    Loaded symbol image file: vsdatant.sys
    Image path: \SystemRoot\System32\drivers\vsdatant.sys
    Image name: vsdatant.sys
    Timestamp: Tue Jun 03 20:03:11 2014 (538E623F)
    CheckSum: 00072B74
    ImageSize: 00095000
    Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4
    Wanikiya and Dyami--Team Zigzag

  • Z87 MPOWER MAX - Killer E2200 BSOD problem on Win 8.1

    Hello all!
    I have a BSOD problem on win 8.1 with the mentioned motherboard . specifically with the Killer E2200  e22w8x64.sys driver.
    No matter where I get the driver for it (MSI installation DVD, killer gaming homepage...) I still have the problem. And it was a bit hard to identify this driver, After 20-30 BSOD-s a day I had to start windows driver verifier to realize wich driver is failing. Is anybody else experiencing this problem? Is there any solution to this, maybe a driver under development?
    I couldn't find the option to attach something ( because extarnal links are not allowed apparently (would have been to skydrive) ), I would have attached a miniDump which has the referrence to this driver.
    Thank You.
    Regards,
    Takács Attila

    Quote
    My question is: can I somehow make it work, can YOU msi developers make it work, or I really need to buy new RAM?
    This is a Users-to-Users Forum. For contacting MSI tech: >>How to contact MSI.<<
    Be waware that your system is a dual cahnnel one and a three stick (triple channel) setup is not optimal. Also it is meant for old X58 systems and most likely 1.65v. Clear cmos and retry with just two sticks.

  • PM7 and WinXP SP3

    Following a disaster, I replaced the primary HDD on my home PC with a brand new one last wekend.
    After re-installing WinXP, MSO2K3, CS2, the thousands of updates which took hours and a call to Adobe for new activiation code as I wasn't able to de-activate, there being an HDD failure, I can confidently assert that PM7 (followed by the updates to PM7.0.1a) installs perfectly. And yes, there is a minor error/typo somewhere in the PM7.0.1a update which calls it PM7.0.1.
    And my positively ancient T1 fonts (Gill Sans, Times New RomanPS and Courier) from 1991 were all added by the windows Font manager as expected and without a hitch.
    Export… AdobePDF… also worked perfectly first time with PM figuring it all out by itelf with Distiller 7.  (My default printer is an HP Laserjet 2300PS which probably helps.)
    So for anyone who is having problems with PM7 and WinXP SP3, I can only conclude that years of accumulated windows junk is where to look.
    As they say with windows, if a re-boot doesn't solve, re-install!
    Iechyd da! John
    22:02 10/11/2009 GMT

    Hi,
    dbgallo wrote:
    >
    > So here's one we've been working, no solution as of yet...
    >
    > PC prior to SP3 is SP2 with all current patches, BM is 3.9sp2 and the
    > server is 6.5sp8 with all current patches. Client is 4.91sp5. CLNTRUST
    > is loaded from the edir login script. with a DWNTRUST proceeding it.
    > CLNTRUST is the version that comes with BM3.9SP2. Windows Firewall is
    > disabled by GPO.
    >
    > We push out SP3 and after reboot, the user gets the prompt to login to
    > BM. reboot the pc 1, 2, 3, 4, up to 8 times to get it to work normally,
    > it does work eventually.,
    >
    > What's causing it to fail? it's not on every machines, but some do take
    > up to 8 reboots to use CLNTRUST again
    Not enough information, but my best guess is a: INstalling SP3 always
    reenables the (new) Firewall. Potentially your GPO doesn't always take,
    and needs several reboots.
    But to find out what's going on, the details of the clntrust status is
    needed, and potentially a lan trace. If the clntrust tstus doesn't show
    any requests (and that's my guess), then my guess becomes almost
    certain.
    CU,
    Massimo Rosen
    Novell Product Support Forum Sysop
    No emails please!
    http://www.cfc-it.de

  • Constant BSOD with nidgpibk.sys when receiving GPIB commands

    Greetings,
    I have a mainframe with a PXI GPIB card installed.  I'm controlling the mainframe with my PC using GPIB and very frequently, the mainframe crashes (BSOD) listed nidgpibk.sys as the culprit.  Them mainframe manufacturer says they can only use NI-Device 1.1 since it's the only version compatible with their system.
    Is nigpibk.sys part of the NI-Device install?  Is there any way to debug or fix this problem?
    Thanks,
    Jason

    Hi,
    Was there ever a solution found for this? I'm getting the same BSOD using the
    nidmgpib.sys driver (v1.5).
    The company we're working with says upgrading is not a quick fix, as they have
    a lot invested in this driver.
    Attached is the dump file.
    Thanks,
    Jeff
    Attachments:
    DumpAnalyzed.TXT ‏10 KB

  • MAX will not display any installed modules mounted to cRIO-9074 chassis WinXP SP3 LV2010 developer

    MAX will not display any installed modules mounted to cRIO-9074 chassis WinXP SP3 LV2010 Developer Suite.
    I can see the backplane in MAX and Project explorer but none of the modules show up for configuration in the drop down lists.  The LV was just installed on the PC with RT/FPGA/Sound and Vibration. I have Admin and am accessing through a PCMCIA Ethernet card. I have to disable normal wireless Ethernet just to see the cRIO unit at all.

    Well, you actually won't be able to see the C-series modules for a cRIO in MAX.  Take a look at this KnowledgeBase article for a little more information.
    As far as not being able to see them in the Project explorer, are you trying to run in FPGA or Scan Interface?  If you're using the FPGA Interface, you'll have to make sure to expand the FPGA Target tree in the Project explorer to see these modules.
    Regards,
    Austin S.
    National Instruments
    Academic Field Engineer

  • Migration Assistant: Problems transferring data from PC (XP SP3) to new Mac Pro 2012 - can not get Migration Assistant to work as PC will not display verfify passcode

    Migration Assistant: Problems transferring data from PC (XP SP3) to new Mac Pro 2012 - can not get Migration Assistant to work as PC will not display verfify passcode
    Hello, I am having problems migrating data from my old PC running XP (SP3) to my new Mac Pro 2012 using the Migration Assistant.
    - I downloaded and installed the Windows Migration Assistant from Apple
    - My Mac recognized PC and displays passcode
    - The sasscode does not show / display on my PC
    - My Mac is then stuck in "authenticating" loop and the PC is stuck "waiting for Mac to connect."
    - Both computers are connected on same network (have connected PC on WIFI and using ethernet to Reuter)
    I have looked on support site and only response I saw says to reinstall Windows Migration Assistant (which I have done)
    Any ideas?  If cant get this to workare there instructions for manually bring across relevant data eg itunes music and apps, photos, picasa data etc?

    Why not turn off the Windows firewall and uninstall any other firewall software you have installed?
    If you are using a Norton product uninstall it and discard it. To fully unistall most Norton products you have to go to the Norton website and download a soecial program to completely get rid of it. The normal uninstall feature built into the program will not remove all of it.

  • "System Update could not start properly" - New error just started (WinXP SP3)

    I can no longer run System Update; it displays the splash screen, then a small window pops up with the above error message. I just ran it last a day or two ago, and it installed a few things; since then I have also run Microsoft Update and it also installed a few things, which I backed out one at a time (except for the malicious software removal updates)--all to no avail.  Anyone else seen this, any suggestions?
                 Thanks,
                 Jonathan
    --T61 (6460-8VU) - WinXP SP3, all the latest patches (except for KB961260, which is still backed out); .NETFramework 3.5 SP1

    Hello,
    I have reinstalled the system update  after I did clean and download the last version from Lenovo website but still have the same pop up message says: Syystem Update could not start properly.
    what's wrong??????

Maybe you are looking for