BSOD - Updated BIOS - Windows doesn't load

Hi,
I've been running my system since August with out any problems, however today I decided to download MSI Live Update since I've never update anything on the motherboard before (except for the GPU driver). So I checked the boxes to update the BIOS, Audio driver and ethernet and I pressed "Total Installer". I got a message that everything went well and that I had to restart my computer which I did. But as my computer is starting again and is about to load into Windows a quick bluescreen pops up and then the computer shuts down itself. I then tried to start the computer again but I get the same problem. Is there any way to resolve this?
Best Regards,
Jon
Specs:
Fractal Design Define R3, Svart
MSI P67A-GD65 Socket 1155, P67, ATX B3
TFT Samsung 24'' S24A350B LED HDMI, Analog Glossy
HD1TB Samsung SP SATA-2 7200RPM Spinpoint F3
CPU Core i5 2500K
Corsair 8GB (KIT) DDR3 1600MHz/VENGEAN/1,5VBLUE
SSD 120GB Corsair SATA 2.5", Force 3 Series
GK PCIe KFA2 GF GTX 560Ti EX OC
PSU Corsair HX 650W 80+, Modulära kabla
DVD±RW Samsung 22X DL Sva rt, Bulk, SH-222AB/BEBE
Kbl HDMI-DVI ha-ha 2 m CA9231520
Windows®7 Home Swe 64-bit Single OEI, SP1

Quote from: Svet on 29-April-12, 05:20:55
oki, it appear to be this version:
http://www.msi.com/service/download/bios-16109.html
Put the BIOS file [E7681IMS.190] over a blank FAT32 formatted USB key,
in a rear USB port of the mainboard, then turn it ON and wait 5 min see if your board can boot from it
I tried it, but it didn't resolve the problem :(
Quote from: HU16E on 29-April-12, 16:08:43
It won't enter UEFI/BIOS now to change the settings?
Nope, after I cleared CMOS and I try to start the computer this happens:
I got no reaction on my monitor while this is happening.

Similar Messages

Update to windows 8.1 Load MMdriver not responding

After I updated my windows 8 professional to windows 8.1, first the graphics drivers stopped working. So I downloaded the intel and amd graphics driver form hp support page.
Now the intel graphics is running fine, but the amd graphics driver is not working. Everytime the laptop starts after 1-2 minutes "Load MMdriver application has stopped working" error comes which disables the highperformance ATI graphics.
Please help what can be done here to solve this issue.
I downloaded http://ftp.hp.com/pub/softpaq/sp59501-60000/sp59936.exe which is dated 2012-11-26 but still is the only driver which actually installs, other lates drivers from the amd abruptly stops through install. Also it is recommended from hp support page for my laptop.
My laptop specs
HP Pavilion g6 Notebook PC 2230ee
Microsoft Windows 8.1 Pro
Intel(R) Core(TM) i7-3632QM CPU @ 2.20GHz, 2201 Mhz, 4 Core(s), 8 Logical Processor(s)
Radeon (TM) HD 7670M
Intel(R) HD Graphics 4000

I found this thread sometime ago as I have had the same problems installing the graphics.
HP Pavilion dv7-6b01tx
Microsoft Windows 8.1 Pro 64 bit
Intel(R) Core(TM) i7-2670QM CPU @ 2.20GHz
Intel(R) HD Graphics 3000 on board
AMD HD 6700M card
8Gb ram
17" 1920x1080 monitor
My issue is now the 'Load MM driver....' but it is deeper than that.
My laptop came with W7 preinstalled and I have since upgraded to W8.1 and got nothing but more problems.
At my last rebuild (I am up to double figures on complete rebuilds trying to fix this) I followed the specific order of installation as given here, chipset, mei etc, I even disabled windows automatic 'look for missing drivers option' so that it didn't install my graphics card itself.
Every time the onboard graphics installer tells me that my laptop doesn't meet the minimum requirements and exits. Eventually I found that doing a windows update at that point (again trying to avoid an auto install of the graphics card) would install the onboard device, then onto the graphics card. Going to Intels site didn't help. (Hope your following this).
This has been the best result to date, apart from the MM driver issue, which is not every time and the fact my screen stays blank after closing the lid (open and close a couple of times fixes that). That may give you the idea of just how hopeless this has been. It also stopped the regular BSOD's that I'd been getting, that's yet another issue.
The fact that I found the 'strict installation routine' on a forum and not on HP's site points to deeper problems.
During one rebuild I left all the drivers off and used the HP site to discover my machine (it did) and check for missing drivers, it came back that everything was up to date. I laughed like a drain at that one.
What has brought me here has been recent, impromptu, discussions with other people and because this issue is the most typical example of the 'HP disease' I could find. Those conversations were basically mocking me, or trying to, for ever buying a HP in the first place. I contended that I'd broken a lifetimes promise that I would never buy a HP, but this machine was about the only choice at the time that met my requirements. Don't get me wrong I don't regret buying it, when it works, well ok when the faults are bearable (error messages, drivers not loading, BSOD, weird shut downs), it is a really nice machine.
HP no doubt will take the view that they sold me a machine with W7 on it and it is now 18 months past warranty. That they are being 'nice' to provide support for another operating system. Not the best way to get returning customers and the simple fact that it really wasn't any better with W7, there was a time when the family knew this laptop by the nickname 'Bluescreen'.
I can't ever really be totally down on HP, I did make good money some 15 years ago going round fixing folks computer problems, without HP I would have gone broke very very quickly.
So there it is, reading the replies on this thread just tell me, don't waste your time mate, HP is simply HP and that will never change. When this machine finally goes belly up (most folks think I've doen well to get to 2.5 years use, I back up everyday) then I will return to that 'lifelong' promise that I broke and simply pay what it takes to get a proper machine with porper support made by proper computer people.
Ah, that feels better!

"adobe updater preferences" window doesn't show

i have the newest adobe reader X and im trying to disable auto update as it says in many instructions on the net
the problem is that i cant get to "Adobe Updater Preferences" window which is necessary to do this - the instructions says that it should appear after clicking "Help"-"Check for Updates" but i see only software checking for updates, completes the check and informing me about any new updates AND THAT'S ALL. just the information that there are no any new updates. there are no any "preferences" option or something as it shows for example below:
http://www.chotocheeta.com/2007/11/01/turn-off-adobe-auto-update/
any idea whats going on? all sites says that this window should be there...

i did this before i started this thread ("do not download or install updates automatically")... it doesnt change anything.
really, wouldnt be life easier if people would disable auto update on SAME window where updates popup? why we must spend our time for searching something that could be just next to info about new updates waiting for download? then wouldnt be this and thounds of other threads :/

Windows 7 and updated firefox window do not load completely . the banner may load or it times out. If I leave it sit for a while it may finish loading. New computer.. cannot figure it out.

I have a new computer with windows 7. I downloaded the mozilla and the update.. now my pages do NOT load completely. the page banner but not the content. or it takes a really long time. When it will not load it say the try again.. and i reload a number of times to get it to load... HELP ME!!
I will include an example below... in the URL blank.
This includes Yahoo and Google...
occasionally it says ...
The connection was reset
The connection to the server was reset while the page was loading.
The site could be temporarily unavailable or too busy. Try again in a few moments. If you are unable to load any pages, check your computer's network connection.
If your computer or network is protected by a firewall or proxy, make sure that Firefox is permitted to access the Web.

Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
*Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
*Do NOT click the Reset button on the Safe Mode start window
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
It is possible that your security software (firewall, anti-virus) blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full, unrestricted, access to install for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.org/kb/Server+not+found
*https://support.mozilla.org/kb/Firewalls
*https://support.mozilla.org/kb/fix-problems-connecting-websites-after-updating

Updating BIOS, Windows won't run the exe

I'm running Win7 Pro x64 and I want to update the BIOS on a a55m-p33 mobo. Live update just says 'download fail', so I've downloaded the file separately and put it on a pen drive as per the BIOS Update SOP. When I run the exe it says it isn't compatible with this version of Windows.
Anyone know why that would be?
Thanks.

>>Use the MSI HQ Forum USB flasher<< and point to the uncompressed archive from MSI or create a dos bootstick (https://forum-en.msi.com/index.php?topic=165175.0), put the .exe on it and start it in dos (also described in the BIOS Update SOP).

My Macbook Pro auto update, now it doesn't load and OS.

My Macbook had what looked like an auto update which I just accepted and now it won't load the Lion OSX at all. It won't even load "Safe Mode." I don't know what to do as it now just says I have to turn it off in four different languages.

If there are problems with updating or with the permissions then easiest is to download the full version and trash the currently installed version to do a clean install of the new version.
Download a new copy of the Firefox program and save the disk image (dmg) file to the desktop
*Firefox 8.0.x: http://www.mozilla.com/en-US/firefox/all.html
*Trash the current Firefox application to do a clean (re-)install
*Install the new version that you have downloaded
Your profile data is stored elsewhere in the Firefox Profile Folder, so you won't lose your bookmarks and other personal data if you uninstall and (re)install Firefox.
*http://kb.mozillazine.org/Profile_folder_-_Firefox

Ever since the "update" itunes store doesn't load.

I haven't been able to access the itunes store on my iphone 4s since the update. It is just a blank screen with the icons listed along the bottom. I have synced the phone with my itunes acct. on my computer. I have signed out and signed back in. I have run a diagnostic on my phone through the apple.com (everything checked out). I have tried to get support from apple.com but keep going around in circles. Before I call or visit a store I thought I'd check to see if anyone else has had this problem and if he/she was able to correct it. Any advice or suggetions would be greatly apprectiated.

Hello, KAS225.
There are a couple of things you can try. The first would be to reset all settings. Go to Settings > General > Reset > Reset all settings.
If the issue persists, try signing out of all services that require signing into your Apple ID and then signing back in.
iOS: Changing the signed-in iTunes Store Apple ID account
http://support.apple.com/kb/HT1311
iOS: Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/ts4268
Cheers,
Jason H.

After today latest update Firefox doesn't load Mafia Wars (on Facebook), but it loads other web sites. Chrome loads it alright.

After latest (today) Firefox automatic update Mafia Wars doesn't load on Firefox. Other sites do load ok. Chrome loads Mafia Wars ok.
I can't load Mafia Wars from Facebook, neither from Zynga directly. Only think I get is a blank page.
I downloaded and installed latest Java and Flash to no avail.

This issue exists for me on a clean installation of Windows 7 64bit running Firefox 7.0.1 with all addons disabled and the cache cleared out. Even with additional cleaning using CCleaner the problem persists.
This problem also exists on my work Win7 64bit box running Firefox 6.0.2 and Windows XP Pro SP3 running Firefox 7.0.1.
My roommates who run Windows Vista are unaffected.

Bsod after bios update 1.4 - 1.5 + Windows automatic repair loops

After i updated my bios with liveupdate5 my computer started acting up with endless automatic repairs for w8.1 and random bsods for w7. Changing bios settings and restoring defaults does not solve the issue :-/
Is it possible to revert back to the 1.4 somehow?

Quote from: RemusM on 07-March-14, 21:50:06
v1.5 was released 3 months ago.
http://www.msi.com/product/mb/H87MG43.html#/?div=BIOS
Did you clear the CMOS (and reload the default settings) after the BIOS update?
hm true, weird how they just now was displayed in the live update. No, I havent done any type of manual cmos clearing, but it would seem that the live update takes care of that as far as the instructions goes.
Patching back to 1.4 without any light in the tunnel. The computer still does no longer boot futher than the windowslogo before bsod. Reinstalling windows does not help :-/

New Icloud Terms and Conditions window pops up every time I try to check my email, or when I open setting. My email doesn't load because of this, so I haven't been able to check my email for months.

'New Icloud Terms and Conditions' window pops up every time I try to check my email, or when I open setting. My email doesn't load because of this, so I haven't been able to check my email for months. When I click, 'view terms' it takes me to my Icloud section in settings, but the terms don't pop up. I plugged it into my iTunes to see if it would pop up, but that didn't work either. My phone is updated, and I'm pretty sure I already accepted the new terms and conditions on the last update a few months back.

Hi munaxnight,
If you are having issues with your iPhone continuing to ask you to accept terms and conditions, you may want to try some things to troubleshoot.
First, quit all running applications and test again -
Force an app to close in iOS
Next, I would try restarting and if needed resetting the iPhone -
Restart or reset your iPhone, iPad, or iPod touch
If the issue is still present, you may want to restore the iPhone as a new device -
How to erase your iOS device and then set it up as a new device or restore it from backups
Thanks for using Apple Support Communities.
Best,
Brett L

My browser will not load a page or update unless I am actively moving my cursor or typing. If I select a page and don't do anything then it doesn't load at all. I have no idea how this happened or how to fix it. Thanks.

My browser will not load a page or update unless I am actively moving my cursor or typing. If I select a page and don't do anything then it doesn't load at all. I have no idea how this happened or how to fix it. Thanks.

Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
* Don't make any changes on the Safe mode start window.
* https://support.mozilla.com/kb/Safe+Mode
* https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

Updating bios in windows 8.1

I'm trying to install a new graphics card (gtx750ti) from ATI Radeon HD 4600 Series (Microsoft Corporation - WDDM v1.1) and have updated power source to 750w. Turn pc on and no video, the pc is working but nothing on the monitor. Had the vid card tested on another machine it works fine, they suggested updating the bios. I'm hesitant to update as there is no windows 8.1 udate, any suggestions?
OS Name Microsoft Windows 8.1 Pro with Media Center
Version 6.3.9600 Build 9600
Other OS Description Not Available
OS Manufacturer Microsoft Corporation
System Name ROBERT-PC
System Manufacturer HP-Pavilion
System Model FK574AA-A2L a6652f
System Type x64-based PC
System SKU FK574AA#A2L
Processor Intel(R) Core(TM)2 Quad CPU Q8200 @ 2.33GHz, 2333 Mhz, 4 Core(s), 4 Logical Processor(s)
BIOS Version/Date American Megatrends Inc. 5.43, 2009-09-10
SMBIOS Version 2.5
Embedded Controller Version 255.255
BIOS Mode Legacy
BaseBoard Manufacturer PEGATRON CORPORATION
BaseBoard Model Not Available
BaseBoard Name Base Board
Platform Role Desktop
Secure Boot State Unsupported
PCR7 Configuration Binding Not Possible
Windows Directory C:\WINDOWS
System Directory C:\WINDOWS\system32
Boot Device \Device\HarddiskVolume1
Locale United States
Hardware Abstraction Layer Version = "6.3.9600.17031"
User Name Robert-PC\ROBERT-PC\Robert
Time Zone Eastern Daylight Time
Installed Physical Memory (RAM) 4.00 GB
Total Physical Memory 4.00 GB
Available Physical Memory 1.95 GB
Total Virtual Memory 8.00 GB
Available Virtual Memory 5.72 GB
Page File Space 4.00 GB
Page File C:\pagefile.sys
Hyper-V - VM Monitor Mode Extensions No
Hyper-V - Second Level Address Translation Extensions No
Hyper-V - Virtualization Enabled in Firmware No
Hyper-V - Data Execution Protection Yes
This question was solved.
View Solution.

You will need to run the IPIBL-LB Motherboard BIOS v5.43 Update on Windows Vista or Windows 7. It is unlikely that the update will succeed when run on Windows 8 / 8.1. Additionally, this update doesn't address your issue and will not solve your problem.
The GTX 750 Ti graphics card is incompatible with your HP Pavilion a6652f Desktop Computer and its IPIBL-LB (Benicia) motherboard. Current generation graphics cards will not work with your computer and you will need to purchase a graphics card that is one generation old... such as the GTX 650 Ti / GTX 660 Ti.
If you have any further questions, please don't hesitate to ask.
Please click the White KUDOS "Thumbs Up" to show your appreciation
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

Update fails and Embedded Youtube videos doesn't load

Problem 1: All update (beta, RC) fails in my computer. After download, when I click in apply button, Firefox closes and a process "firefox.exe"starts with (~2.800 kB) and nothing happens. Every time and every versions in my 2 computers (Vista and Seven). It occurs since ~10 version (9, 10, 11... i don't remember.
When I download the exe from Mozilla, the update works.
Problem 2: Since the ~10 version or flash version, mostly embedded youtube videos doesn't load in firefox (in all pcs again). In youtube site it works, but embedded only shows a black square. In Google Reader it occurs all the time.

A possible cause is security software (firewall,anti-virus) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.org/kb/Server+not+found
*https://support.mozilla.org/kb/Firewalls
If there are problems with updating then best is to download the full version of the Firefox installer.
Download a fresh Firefox copy and save the file to the desktop.
*Firefox 15.0.x: http://www.mozilla.org/en-US/firefox/all.html
Uninstall your current Firefox version, if possible, to cleanup the Windows registry and settings in security software.
*Do NOT remove personal data when you uninstall your current Firefox version, because all profile folders will be removed and you will also lose your personal data like bookmarks and passwords from profiles of other Firefox versions.
Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
*It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
*http://kb.mozillazine.org/Uninstalling_Firefox
*http://kb.mozillazine.org/Installation_directory
Your bookmarks and other profile data are stored in the Firefox Profile Folder and won't be affected by an uninstall and (re)install, but make sure that "remove personal data" is NOT selected when you uninstall Firefox.
If you keep having problems then also create a new profile.
*http://kb.mozillazine.org/Profile_folder_-_Firefox
*http://kb.mozillazine.org/Profile_backup
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

X120e update BIOS failed "Driver Loading Failed. The Utility cannot proceed"

I was tried to update Bios to 1.12 but not successed..
It always came out this message " Driver Loading Failed. The Utility cannot proceed."..
I tried to update under safe mode, still not work..
I tried to use Winflash, it came out "Cannot open new BIOS file"..
There's only one method that I didn't try is that burn a ISO CD and connect to External CDROM.. but I don't have External CDROM..
The reason that I update Bios is that I want to install Toolbox; otherwise, I won't take this risk..
For futhermore information click following link..
http://forums.lenovo.com/t5/ThinkVantage-Technologies/This-version-of-Lenovo-ThinkVantage-Toolboox-i...

Sounds like something wonky with your Windows install. I'd avoid doing a BIOS update through such an install.
W520: i7-2720QM, Q2000M at 1080/688/1376, 21GB RAM, 500GB + 750GB HDD, FHD screen
X61T: L7500, 3GB RAM, 500GB HDD, XGA screen, Ultrabase
Y3P: 5Y70, 8GB RAM, 256GB SSD, QHD+ screen

Compaq Presario SR2129UK bios update for windows 8 pro 32bit

Hi all.
I have recently upgraded my operating system from Windows 7 pro to Windows 8 pro. I have alos changed the CPU to a pentium D, The power supply and the graphics card but I am having from with my SD ram and temperature displays.
I want to upgrade my bios if possible due to all the upgrades, when I looked in this site it doesn't mention windows 8 operating system with my PC? My system info is below.
Compaq Presario SR2129UK bios update for windows 8 pro 32bit.
Any help would be appreciated.

Hi:
The only BIOS update for your model is for Windows Vista (v5.23).
There aren't any newer BIOS releases than that one.
You would need to be running Windows Vista in order to update the BIOS, or you would run a better than 99% chance of completely wrecking your PC.

BSOD - Updated BIOS - Windows doesn't load

Similar Messages

Maybe you are looking for