BSOD when connected to Ipod 120 gb

Whenever I connect my ipod to my laptop the laptop crashes, my desk top computer does not crash when connected to the same ipod.

So we know it's not an issue with the iPod or with the cable.  Are all the drivers, firmware, chipsets, and BIOS up
to date on the PC? To check, you'll have to visit the laptop's manufacturer's support site.  You'll need to know the
make and model of the laptop to get to the appropriate downloads page.
Was the iPod ever able to successfully connect with this laptop without causing the BSOD?
B-rock

Similar Messages

  • Does anyone Know how to fix error 0xe8000065 when connecting the ipod touch 4g

    does anyone Know how to fix error 0xe8000065 when connecting the ipod touch 4g

    See:
    iPhone, iPad, iPod touch: Unknown error containing '0xE' when connecting

  • PC sometimes crashes when connecting my iPod

    Hi,
    Apologies if this has been asked and answered before, I couldn't seem to find anything relating to my particular problem.
    On occassions when connecting my iPod to my PC at work I find that the PC powers down completely, without going through any shutdown procedure. I then have to switch off the mains supply, listen for what sounds like a slight discharge, switch on the mains supply and power up my PC. If the iPod is already cabled up there's no problem with powering up. This doesn't happen everytime I connect, just intermitently, but it's annoying as I don't have any problems with anything else in the USB ports I'm using. I've also tried different USB ports on the machine, and it doesn't seem to make any difference. The PSU for the PC is 380W, so that shouldn't be the problem.
    Fortunately the iPod doesn't get chance to go into 'Do Not Disconnect' mode, so I've never lost any of my content. But it's still annoying!
    Can anyone suggest what's causing this?
    Windows XP Professional SP2 and all the current updates
    iTunes 7.5.0.20
    30Gb 5th Gen iPod
    Thanks

    Yes, the list on my computer of what is in my iPod library is grey, not black font. I tried "manual" but it will not allow me to drag anything to the iPod. Not even newly purchased music.
    That certainly sounds like one of the Automatic syncing options has been engaged.
    ... quickly doublechecking, just in case. After selecting "Manually manage ..." in the device tab for the iPod in iTunes, did you click "Apply"?

  • When connecting my ipod nano (5 gen) I get an error messege saying that it was recognized but not properly. Ive tried everything the support site says and it still not working. What do I do now?

    When connecting my ipod nano (5th gen) I get an error messege saying that it was recognized but not propperly. I treid everything that the support site said to do but it still not working. What do I do no?

    This came from another thread, but worked for me.  Problem is with newest iTunes 4.62.  Unistall iTunes, as well as its helper programs (Apple Application Support, Apple Mobile Divice Support, and Apple Software Update).  Reboot, and reinstall iTunes.  It will reinstall all the other ones and you should be able to connect your nano.  Good luck.

  • ThinkPad W530 with Windows 8 x64 Pro BSOD when connecting to projector

    Nine, that only covers Widows 7. Many people in this thread have reported the problem using Windows 8. Has that been addressed by Lenovo yet? Stability problems like this should NEVER be allowed to go so long without a resolution.
    Edit Note : This thread was created base from the previous thread "ThinkPad W530 with Windows 7 x64 Pro BSOD when connecting to projector. As we currently Cx reporting facing the same issue on Win8 I have seperated this thread in order not toconfuse other customer. For cutomers facing this issue please continue posting in this thread.

    Hi shan_mcarthur,
    Thanks for posting. I read through this thread again and noticed that most of customers here do indeed have Windows 7 installed as what the title represented unless I'm mistaken or may have missed out are you or anyone else here facing the same issue on Windows 8. If that is the case I'll be more than happy to bring this up with the teams but it will have to be a new thread though as I'd like to keep the resolution separate based on the OS use just to not confuse other customer .
    For those facing the same issue above on Win8, please do let me know so we can start a discussion around this.
    Do let me know.
    Regards

  • Computer is crashing (freeze) when connecting my iPod Nano

    Hello,
    my computer is crashing (freeze) when connecting my iPod Nano. I have a Pentium IV with windows XP Pro. Can anybody help me please.

    This came from another thread, but worked for me.  Problem is with newest iTunes 4.62.  Unistall iTunes, as well as its helper programs (Apple Application Support, Apple Mobile Divice Support, and Apple Software Update).  Reboot, and reinstall iTunes.  It will reinstall all the other ones and you should be able to connect your nano.  Good luck.

  • Itunes freezes when connect my ipod

    When connect My ipod Classic to itunes, itunes freezes and when disconect the ipod, itunes restabilized. I try uninstall all apple software in my pc, but no work. This problem continue in others computers
    Sorry for my english, i speak spanish... HELP
    EDIT: Ah! When connect mi iPhone is work correct, the problem is con my iPod. It's work perfect in hard disk mode, not know

    Similar problem here:
    When I'm playing songs with iTunes and connecting my 3G 20GB iPod, my computer will hang up completely - screen goes dark and I have to reset my PC.
    However, when my iTunes is "idle", i.e. not playing a song or doing anything else, connecting and syncing the iPod will work just fine.
    I'm using the newest (6.x) Version of iTunes on WinXP SP2 with a 3G iPod 20GB.
    Martin

  • When connecting an iPod touch 4g to an accessory (car radio) can be heard crackling (cliping)

    When connecting an iPod touch 4g to an accessory (car radio) can be heard crackling (cliping), as if listening to an old record, but via headphones everything is ok. So where is the problem?

    All I can suggest are the standard fixes:
    - Reset the car system/contact the manufacturer
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up           
    - Restore to factory settings/new iOS device.

  • Ipod Error Message when connected to Ipod Hifii, Stereo ect

    I get the following errormessage wehn I connect my ipod to my ipod hifi or my car stereo "Firewire connections are not supported. To transfer songs, connect the USB cable provided. Press center to dismiss"
    when I push the center button it sometimes goes away but mostly it just comes back.... does anyone have any suggestions????
    Celeron 1.1 512 M memory, 40 g    

    Try restoring the ipod first.
    http://docs.info.apple.com/article.html?artnum=60983
    If this does not work, it is not a software issue, but a hardware issue.
    Set the ipod up for service using this website.
    http://depot.info.apple.com/ipod

  • ITunes won't automically update to IOS 5 when connecting to iPod Touch

    I followed the directions to connect my iPod to iTunes and it won't initiate the upgrade to IOS 5.  When I clicked on the check for updates button, I get a message that I am current.  Being that I am on version 4.2.7 I find that hard to believe.  I also tried a Manual download of IOS 5 and that did not work either.

    Do you mean iOS 4.2.1?  If so, it means you likely have a 2G iPod Touch, which can only go as high as iOS 4.2.1.  See this article to help you determine what generation of your iPod Touch is.
    http://support.apple.com/kb/ht1353
    B-rock

  • ITunes and Computer freeze when connecting 160GB iPod classic

    160 GB iPod Classic
    Model: MC293LL
    Version: 2.0.4 PC
    iTunes version: 11.1.3
    computers: 1 Win8 desktop,
                     1 Win7 Home Premium, Service Pack 1 Notebook
    since yesterday I started having trouble with my iPod. When connecting it to the Notebook it showed a message: "There's a problem with this device. Scan the drive now and fix it". After clicking on scan and trying to fix the problem the notebook froze, so I connected it to me desktop, and it worked, it said that the problem was fixed. But when trying to open the iTunes it froze and after disconnecting it I realised the music was gone. So I connected it again, the same "There's a problem with this device. Scan the drive now and fix it"-message showed, but at the end the computer said it didn't detect any problem with the drive, so I opened iTunes and restored the iPod, and it worked but after that iTunes froze, then Windows Explorer and then the whole computer. Tried to connect the iPod to the Win7 Notebook and the same thing happened, first iTunes froze and then the computer froze, they both didn't show the blue screen.
    What can I do? The iPod was already restored to the factory settings.

    i had the same problem. all i did was download the newest version of itunes, which i had been putting off for months because it takes so long. after i did this itunes worked fine for me
    hope this helps

  • TS1372 when connecting my ipod nano to itunes, it states unknown error (2005) ? Thank you

    When I connect my ipod nano to itunes it shows an error, unknown (2005) and it my ipod doesn't appear. I have a shuffle and it recognises that fine. Has my nano given up or is there something I can do?
    Thank you for any help

    Did you already try the suggestions mentioned in this article? iTunes: Error 13019 during sync

  • Ipod Communications Error rec'd when connecting to Ipod port in Scion Xb

    I recently purchased an Ipod Nano and a Scion Xb. The Scion has an Ipod port for easy connection. However, when I connect my Ipod Nano to the port/cable, I get an error message. "Ipod Communication Error" Does anyone know what I can do to fix this problem?

    I have a Scion xB 2006 with the Pioneer iPod control and an iPod Photo 30GB. Which was working fine for about 3 weeks and now it will play a few tunes and then freeze. I've also run into songs playing but with no sound on iPod. I've tried rebooting the iPod, I've tried to restore/update, reload the music and settings on the iPod with no luck. After the freeze the setting stay stuck to the Scion logo on the iPod.
    I suspect Pioneer puts a little bit of code out on the iPod disk or firmware to get it to work with the Steering Wheel controls as well as putting out its own logo and messages on the iPod display itself. Support for the iPod podcast menu seems non-existent as well. It would be nice if there was a way to get the iPod back to Factory Settings. I suspect a problem with the manufacturer Pioneer. But I'll go complain to my dealer first!
    iBook G4   Mac OS X (10.4.6)   iPod Photo 30GB
    iBook G4   Mac OS X (10.4.6)   iPod Photo 30GB
    iBook G4   Mac OS X (10.4.6)   iPod Photo 30GB

  • ThinkPad W530 with Windows 7 x64 Pro BSOD when connecting to projector

    Hi,
    I have 2 identical ThinkPad W530 laptops model 244723G
    Both are set to discrete graphics from BIOS because with optimus driver my projector will not work at all.
    But how i have other issue that causes BlueScreen when connection laptop to projector.
    I have installed latest driver from Lenovo download site -> still BSOB when connecting to projector.
    When i install driver from Nvidia site it fixes BSOD issue with discrete graphics and external projector.
    Can same one else confirm that there is a error on Lenovo optiomus driver when using discrete graphics?
    Solved!
    Go to Solution.

    Would you mind posting the links to those drivers, or copying their exact name for us to search on the appropriate site(s)?
    I use a w520 (quad core/nVidia 1000 discrete graphics board) with a projector and anything that makes that smoother I have to consider. There have been posts about how to re-create the usual ThinkPad use of the F7 key for choosing projector view mode but I admit I have never been able to take the time (and risk of failure) to try the swap of internal files to make it happen. (Starting a project like that always makes me feel I have to have time to do the project and if it goes wrong re-install the OS and all updates -- all before the next time the laptop is needed for anything important. That condition is almost never possible.)
    Yeah, I know, I'm chicken! <grin>
    jonathan7007
    4276-37U -- W520. Still have an X61t. First laptop in my house was an Osborne! Now that was a cool computer. (...for its time!)

  • Itunes messes with my libraries and songs when connected with ipod.

    On my itunes when i move songs around to other libraires and such it wont add them to the library when it downloads to the ipod. When i make my libraires on the ipod and i connect my ipod to itunes it deletes everything i have made on the ipod and reverts back to the libraries on itunes. Basically if i want my ipod libraries set up the way i want i cant connect my ipod to itunes anymore. I also have a problem with itunes not being able to locate music files in my library folders after i move a few songs around or add mor songs or whatever. How do i get my itunes to leave the libraires the way i make them and not keep songs from transfering over to the ipod. Its actually ******* me off. its not that the songs arnt playable they just keep getting removed on their own. how can i set up my music files in a folder where itunes will resort to and not have any problems locating the files.

    For anyone who hits this thread: Hit view, then "hide music in the cloud." Your libraries will return to how you have built them.
    Kelly, your music is still probably on your hard drive. The iCloud is just a cute techy way of saying that you have online access to things you've purchased from apple... just wait until they make it so that you ONLY have online access to your purchases, and nothing ever comes "off" the cloud for you to tangibly own.
    Folks, this is a smoke and mirrors gimmick to make you buy-in to the itunes store. Let Apple manage, deliver, and DECIDE all the content that you will see. It's at least one degree more insiduous than corporate radio.
    Kudos on the crisp interface and larger album cover displays, but...
    Apple cannot find cover art for 1/3 of the library that I have built. That is because Apple does not carry that music. Apple will never host music from ancient vinyl that I have remastered, Apple will never host the shows of obscure electronica djs or the local bluegrass bands that put out EPs in the western US in the 80s. If you restrict your music experience to a single venue, you are not only missing out, but you are supporting an economic model which quashes music that does "not meet industry standards." Have fun with iTunes 11 kids.

Maybe you are looking for

  • Where is the Beat Detection feature in Adobe Premiere Pro?

    Dear community, Adobe Premiere Elements sports a cool Beat Detection feature, unfortunately the Pro version doesn't. Why is that? And why can't paying CC subscribers use the Elements version for free? Or do I miss something? Kind regards, Tim

  • Encoding on the server

    How can I receive a 1.5Mbit stream from Flash Media Live Encoder and then re-encode it to 2 different streams? It's much like what Ustream is doing. They receive one high-quality feed, and then re-encode to a couple of different qualities in realtime

  • Time Capsule + MacBook Pro

    So i got a MBP and set it up last night. also got the time capsule and configured it. It seemed to be working, my Dell laptop recognized the wireless network and connected. But my Mac was not configured for that network (when i booted up, i configure

  • Parameter In Query Problem

    Hi All, I am having some trouble with my query below.  The query runs fine however the moment I put the [%0] parameters in the query does not run at all.  I don't get any errors it just simply does not run.  If I take out this part AND (T1.WhsCode =

  • How to store and use coordinates

    I need to store 2d coordinates and use them in solving equations and pass them into methods. For example, I need to store the coordinates of a corner of a rectangle (5,10). Then I need to use that point and solve for certain variables in a equation (