Bsod win 7 halmacpi.dll and ntkrnlpa.exe

I am having BSOD errors with the above files
here are my dumps
https://onedrive.live.com/redir?resid=FA19834CC1347DBF!631&authkey=!ADggVUV25M6TmHA&ithint=file%2cdmp
Not sure what the issue is as I have updated
Thank you

Lunat1k
First step is to update to service pack 1. That may by itself fix the issue.
Second if it does not this one crash was Related to e1c62x64.sys Gigabit Adapter NDIS 6.x driver from Intel Corporation. I would remove the current version and install the newest version available.
Microsoft (R) Windows Debugger Version 6.3.9600.17237 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Users\Ken\Desktop\102714-17940-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available
DbsSplayTreeRangeMap::Add: ignoring zero-sized range at ?ffffffff`8078ada4?
************* Symbol Path validation summary **************
Response Time (ms) Location
Deferred SRV*D:\symbols*http://msdl.microsoft.com/download/symbols
Symbol search path is: SRV*D:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7600 MP (4 procs) Free x86 compatible
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7600.17273.x86fre.win7_gdr.130318-1532
Machine Name:
Kernel base = 0x82e48000 PsLoadedModuleList = 0x82f90810
Debug session time: Mon Oct 27 01:40:05.422 2014 (UTC - 4:00)
System Uptime: 2 days 13:27:35.979
Loading Kernel Symbols
Loading User Symbols
Loading unloaded module list
* Bugcheck Analysis *
Use !analyze -v to get detailed debugging information.
BugCheck 9F, {3, 863d4690, 8078adb0, 8a9bb8e8}
Probably caused by : pci.sys
Followup: MachineOwner
0: kd> !analyze -v
* Bugcheck Analysis *
DRIVER_POWER_STATE_FAILURE (9f)
A driver has failed to complete a power IRP within a specific time.
Arguments:
Arg1: 00000003, A device object has been blocking an Irp for too long a time
Arg2: 863d4690, Physical Device Object of the stack
Arg3: 8078adb0, nt!TRIAGE_9F_POWER on Win7 and higher, otherwise the Functional Device Object of the stack
Arg4: 8a9bb8e8, The blocked IRP
Debugging Details:
DRVPOWERSTATE_SUBCODE: 3
IMAGE_NAME: pci.sys
DEBUG_FLR_IMAGE_TIMESTAMP: 4a5bbf14
MODULE_NAME: pci
FAULTING_MODULE: 8c4f0000 pci
CUSTOMER_CRASH_COUNT: 1
DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT
BUGCHECK_STR: 0x9F
PROCESS_NAME: svchost.exe
CURRENT_IRQL: 2
ANALYSIS_VERSION: 6.3.9600.17237 (debuggers(dbg).140716-0327) amd64fre
DPC_STACK_BASE: FFFFFFFF8078B000
STACK_TEXT:
8078ad64 82e83314 0000009f 00000003 863d4690 nt!KeBugCheckEx+0x1e
8078add0 82e82ba8 8078ae94 00000000 8a9268c8 nt!PopCheckIrpWatchdog+0x1f5
8078ae08 82eb120d 82f89a20 00000000 760a5b3f nt!PopCheckForIdleness+0x73
8078ae4c 82eb11b1 82f71d20 8078af78 00000001 nt!KiProcessTimerDpcTable+0x50
8078af38 82eb106e 82f71d20 8078af78 00000000 nt!KiProcessExpiredTimerList+0x101
8078afac 82eaf3ee 00d86a48 963add34 00000000 nt!KiTimerExpiration+0x25c
8078aff4 82eaebbc 963adce4 00000000 00000000 nt!KiRetireDpcList+0xcb
8078aff8 963adce4 00000000 00000000 00000000 nt!KiDispatchInterrupt+0x2c
WARNING: Frame IP not in any known module. Following frames may be wrong.
82eaebbc 00000000 0000001a 00d6850f bb830000 0x963adce4
STACK_COMMAND: kb
FOLLOWUP_NAME: MachineOwner
IMAGE_VERSION: 6.1.7600.16385
FAILURE_BUCKET_ID: 0x9F_3_POWER_DOWN_e1c6232_IMAGE_pci.sys
BUCKET_ID: 0x9F_3_POWER_DOWN_e1c6232_IMAGE_pci.sys
ANALYSIS_SOURCE: KM
FAILURE_ID_HASH_STRING: km:0x9f_3_power_down_e1c6232_image_pci.sys
FAILURE_ID_HASH: {22313249-e49c-434f-ae49-c0186bd073a4}
Followup: MachineOwner
0: kd> !irp 8a9bb8e8
Irp is active with 4 stacks 3 is current (= 0x8a9bb9a0)
No Mdl: No System Buffer: Thread 00000000: Irp stack trace.
cmd flg cl Device File Completion-Context
[ 0, 0] 0 0 00000000 00000000 00000000-00000000
Args: 00000000 00000000 00000000 00000000
[ 0, 0] 0 0 00000000 00000000 00000000-00000000
Args: 00000000 00000000 00000000 00000000
>[ 16, 3] 0 e1 86435028 00000000 83168f78-8b068048 Success Error Cancel pending
*** WARNING: Unable to verify timestamp for e1c6232.sys
*** ERROR: Module load completed but symbols could not be loaded for e1c6232.sys
\Driver\e1cexpress nt!PopSystemIrpCompletion
Args: 00016600 00000000 00000006 00000005
[ 0, 0] 0 0 00000000 00000000 00000000-8b068048
Args: 00000000 00000000 00000000 00000000
Wanikiya and Dyami--Team Zigzag

Similar Messages

Difference between AcroPDF.dll and Acrobat.exe while loading standard and custom plug_ins

Hi,
I want to know the difference of behavior when AcroPDF.dll loading the PDF file in the internet explorer and Acrobat.exe application loading PDF in context of plug_ins developed by Adobe or Custom plug_ins using SDK.
When I am loading PDF within Acrobat.exe all the plug_ins (Standard as well as Custom) loaded successfully and working fine but at the same time if I am loading a document within Internet Explorer, behind the scene internet explorer using AcroPDF.dll which is ActiveX for IE to load PDF and it is trying to load plug_ins (standard and custom) but some how my custom plug_in is destroyed or currpted and it is not working any more.
I want to know how AcroPDF and Acrobat.exe using AcroExch.App class or using any other thing to load plug_ins?
Thanks,
Twinkle

For this level of support, you join our developers/partners program and submit a formal support request.

Ntkrnlpa.exe 22fa3 causing bsod at point of final shutdown

My minidump file says: "ntkrnlpa.exe+22fa3" has caused the BSOD.
This BSOD appears at the final point of shut down / restart.
Other syptoms:
This DC7700p using SP3 is running slowly - memory seems to over used.
I have run Malwarebytes, CCleaner, SuperSpyware and NIS is loaded on this machine.
All report "no problems"
Also my USB mouse is affecting the audio when moved.
The later may just be just lack of memory.
System:
O/s build 2600 lang: 0809
RAM 3.6GB
Bios 786e1 vo3.07
Tried replacing SP3 and every other thing I have found to sort this problem.
Fed up reading and searching for the answer.
Any thoughts

Hi Silverfox1947,
I was wondering when was the last time your system was defragmented? Here is a document on how to defragment your disk drive volumes in Windows XP.
http://support.microsoft.com/kb/314848
If that does not work the next step would be to do a system restore. Here is a link on how to do that.
http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/app_system_restore_hs...
Hope it helps.
Thanks
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

BSOD with ntkrnlpa.exe

Hi guys,
I've had a BSOD caused by ntkrnlpa.exe and I would like to know if you can find out what exactly (probably some driver?) caused the crash? I can attach files later if this is possible.
Thanks, Hakosuka

Hi,
Here are some suggestions you can try:
1. Please boot into Clean
Boot Mode and Safe Mode
test the issue again.
2. Update your Chipset driver to the latest and see how it works.
If it works fine in Clean Boot, the root cause can be the third party software. If the issue reoccurs in Clean Boot, but works fine in Safe Mode,
the cause can be the disabled hardware drivers. You may narrow down the causes in Device Clean Boot.
Device Clean Boot
=================
1. Click Start, type "devmgmt.msc" (without quotation marks) in the Search bar and press Enter.
2. Expand "Sound, video and game controllers".
3. Right click on your sound card and then click "Properties.
4. In the dropdown menu of Device Usage, please choose "Do not use this device (disable)" and click OK.
5. Please use the same method to disable other dubious hardware such as: internal modem, network card and CD-R drive. Please note some devices such as video adapter are not available to
be disabled.
In addition, it is recommended to connect the Beckhoff for assistance. Beckhoff should be the best resource for this. Thank you for your understanding.
Tracy Cai
TechNet Community Support

Error report on win 8.1 about conhost.exe and werfault.exe

I am not sure exactly what is happening, but I have noticed recently a new problem with CONHOST.EXE and werfault.exe each time I was opened application. and I didn't know exactly about was there have relationship with my brightness control
(increase or decrease) than I can't make any change after first time I have noticed about conhost.exe and werfault.exe. and other problem than my laptop more 'slowly' than before, but the console window will remain open fastly enough. (The host process
exists, but I can see an orphaned CONHOST.EXE for the application in Task Manager.)
I hope someone who sees this knows why this is happening, and can help me fix the problem.
Thanks!

Hi,
Here is the details about conhost.exe process:
Windows 7 / Windows Server 2008 R2: Console Host
http://blogs.technet.com/b/askperf/archive/2009/10/05/windows-7-windows-server-2008-r2-console-host.aspx
Same within Windows 8.
The werfault.exe is used for Windows Error Reporting.
You can go to event viewer to check if there are any error messages.
For this kind of issue, you may also try Clean Boot to see if this problem persists.
Alex Zhao
TechNet Community Support

How do I stop Win7 from breaking my software? Ole32.dll and "Power" service suspected culprits.

Hello and thanks for any help with this.
I built a new computer for my aunt and her one major request is that she still be able to use her card maker software Creatacard (yes misspelled just like that) by American Greetings. I thought this would be no issue, I could give her a much faster machine
and get her off (the no longer supported) WindowsXP all at the same time by moving her to Windows7 and copying all her files over from the old PC to the new one.
I tested the software first on a test PC of mine and found it would not install in a 64bit environment (error message saying use 32bit during install) which I solved by using Windows7 32bit. It worked perfectly so I proceeded to build her machine thinking
that issue resolved. Problem is after the new rig was built and SP1 plus all windows updates were installed the Creatacard software would not load. I get an instant popup message saying "Creatacard Application File has stopped working" with the options
to "Check online for a solution..." and "Close the Program."
Checking online does nothing noticeable and close program doesn't help as every time you reload it fails immediately with the same message. Clicking on the "view problem details" drop menu reveals that this is an APPCRASH with the following clues
Fault Module Name ole32.dll
Fault Module Version 6.1.7601.17514
I have researched and tried everything I could find online about this crash and none of it (up to and including completely re-installing Windows, systematically loading a few Win-updates and trying the app after each batch, editing the registry multiple
times, trying alt versions of ole32.dll, and using a Linux live CD to alter windows settings) has fixed the problem. I have learned the following though:
When windows is first installed the card maker software (CMS from here on) works fine.
After windows updates itself and a few device drivers auto load (like when you first plug in a USB mouse or Flash drive) CMS breaks.
Loading windows normally after it is up to date always causes CMS to crash and give the above message.
When I perform a "clean boot" CMS works fine once again.
When I boot into safe mode CMS works fine.
Someone online suggested a service could be the actual problem and there being 140 of them I used the 50% method to quickly narrow the list and found that yes indeed windows services do appear to be related because if I don't allow the "Power"
service to run the CMS works perfectly. With a bit of testing to see what it does I found that it controlled wake/sleep settings, delay until your monitor goes dark etc and that if the Power service is disabled it remembers the last settings entered and I
thought GREAT! Finally after many days of frustration and being balked by nonsense I have a solution. My aunt will never use/miss the power settings I will set them up for her once and then kill that service and all is well for a Happy Holiday... (from my
research online some may already guess where this is headed) until I went to play a video............ and there was no sound.
A little red X had appeared next to the speaker icon down in the system tray next to the clock and hovering over it gave a popup with "The Audio Service is not running." This is where the BS gets deep. I had of course NOT disabled the sound (Windows
Audio) service and a quick check showed it and all the services it depended on were in fact on and running. The Windows trouble shooter offered to fix the issue and so I let it run but it comes back with "one or more Audio service is not running"
and attempting to restart the service on its own came back with a "Not fixed" result. Now if I go to check dependencies for the "Power" it claims that no other services depend on it and it depends on nothing but that is an outright lie.
Further digging shows me the Power service's "path to executable" as... C:\Windows\system32\svchost.exe -k DcomLauncher and many other services show they depend on DcomLauncher to run.
Long extra trouble shooting session short here is where I am at. I can have the sound working or the CMS but not both.
Uninstalling and re-installing the sound card drivers didn't help (since sound is being stopped at the windows OS level) either.
As soon as I turn on the Power service and reboot the CMS breaks. As soon as I disable the Power service and reboot the CMS works perfectly but all audio breaks. Both of these are a deal breaker as she will not leave her old slow XP machine without her CMS
and I cannot give her a new machine that has no sound. Reboots take 30 seconds on this new PC so were it mine I could just live with it as the CMS has no sound and I don't need music playing when I am designing a Christmas card. Use the sound/power on 99%
of the time and disable them and reboot whenever I make a card and then enable and reboot when I am done. This would be over her head though I fear as she is a senior and not very tech savvy. My question then is...
Is there any way to have the CMS work while still keeping the Windows Audio service (and all the other not listed but still existing dependent services) running? Or alternatively is there something else I can do to the ole32.dll to make it stop the crash/error?
To be clear I would happily accept a system without the Power service running if (like it actually says under dependencies) nothing else other than the "Power Options" in Control Panel ceased to function.

Thanks Michael. Apologies for the slow reply I was away for a bit (holiday blitz at work and visiting family madness etc.etc.) back now, I set both options you requested to "never " and retried the CMS software with no change.
I do have progress of a sort though, as a test I took a separate test PC and put a clean install of Win7 on and loaded up the CMS software (it worked perfectly) and then took the version of ole32.dll off that machine and put it onto the computer I had built
for her (using Linux) and...
got a new error code. Darn I was so sure I had found a clever solution this time lol.
Anyway now when the CMS fails it gives me a similar error but the offending module is "ntdll.dll" sooo... I tried taking the "working" version of ntdll.dll from the test box and moving it over (making sure to back up the existing ones
first so I could put them back if needed) to her new PC and the PC would not boot.
It seems to want the original versions of a few Dynamic Link Libraries and if I could somehow give it those while not breaking Win7 it should theoretically work seeing as it no longer errors with ole32.dll.
ntdll.dll however seems necessary for Win7 to boot.
So what I am wondering now is:
Is there some way to have both versions of the DLL file in the system32 folder (bypassing the "cannot have two files with the exact same name in the same folder" thing) or rename the original DLL's something else and somehow make the CMS look for
the new named versions so the system has the updated DLL's it needs to boot/run and the CMS has the old ones it wants to run or is there someway to have a self contained install of the CMS, say on a USB flash drive and give it it's own E:/windows/system32/needed
dll's path to the files it needs?
Willing to try any other options or settings you may have come up with as well.
Thanks again for your reply and my apologies for not answering sooner.

Re-Occurring Blue Screen~Dump files included~Please Help~Unable to verify timestamp for ntkrnlpa.exe

Hello,
Starting yesterday I started getting the BSOD. I have uploaded my dump files to this dropbox account:
www.dropbox.com/sh/w3ryago8pfcw2y2/AAAR5i6Crx5q-p--xdESJjnMa
There are lots of them as my PC crashed many times.
I attempted to analyze them with windbg but all I can see is:
Unable to load image \SystemRoot\system32\ntkrnlpa.exe, Win32 error 0n2
*** WARNING: Unable to verify timestamp for ntkrnlpa.exe
Also I ran sfc /scannow and it found no integrity violations.
After the first BSOD I was barely able to get Windows to load without another immediate crash. I couldn't boot my PC last night but today seems okay so far. CPU temp was fine, actually quite cool as I had my window open right by the PC with the side off
the case and it was cold last night. Today, so far, seems to be running okay...so far anyways..
Windows update recently installed a driver for my on-board video card (Nvidia GeForce 6150n) on the 18th I think as I started using a 2nd monitor using the on-board card in addition to my PCI Express Ati Radeon HD. To use the second screen, I switched
the primary video in CMOS to on-board instead of PCI-E 16x so the on-board Nvidia card would be enabled.
I also installed brand new ram (4gb DDR2) about a month ago
and a new power supply 2 months ago. The power supply is not "exactly" the same voltage as the one that was in there but it's dang close. But I don't have any power leeching components.
Other than that nothing new has happened. After I got the crash, I tried to enter CMOS yesterday and it glitched out on me twice. I hope it's not my motherboard..
I am willing to do a system re-format as I am running Windows 7 32bit on a 64bit AMD so I wouldn't mind having 64 bit Windows anyways but I'd like to know what the problem is before I do this. Thank you.
Update: Just did a MalwareByte's Anti-Malware scan and no malware but found these items:
Scan Date: 5/22/2014
Scan Time: 6:08:00 PM
Logfile:
OS: Windows 7 Service Pack 1
CPU: x86
File System: NTFS
Scan Type: Threat Scan
Result: Completed
Objects Scanned: 261539
Time Elapsed: 8 min, 10 sec
Processes: 0
(No malicious items detected)
Modules: 0
(No malicious items detected)
Registry Keys: 0
(No malicious items detected)
Registry Values: 0
(No malicious items detected)
Registry Data: 0
(No malicious items detected)
Folders: 2
PUP.Optional.CrossRider.A, C:\Users\Justin\AppData\Local\Google\Chrome\User Data\Default\Extensions\ecoccdldklbjglocbgbfpmpehjegkode, , [dd97c58f413a74c2503e7106649ec23e],
PUP.Optional.CrossRider.A, C:\Users\Justin\AppData\Local\Google\Chrome\User Data\Default\Extensions\ecoccdldklbjglocbgbfpmpehjegkode\0.1_0, , [dd97c58f413a74c2503e7106649ec23e],
Files: 9
PUP.Optional.OptimumInstaller.A, C:\Users\Justin\Downloads\Player-Chrome.exe, , [6b090a4a4437d363a05f361717ea718f],
PUP.Optional.Outbrowse, C:\Users\Justin\Downloads\install-flashplayer.exe, , [561ee173fe7d1125edf4d9a443be5aa6],
PUP.Optional.CrossRider.A, C:\Users\Justin\AppData\Local\Google\Chrome\User Data\Default\Extensions\ecoccdldklbjglocbgbfpmpehjegkode\0.1_0\icon-128.png, , [dd97c58f413a74c2503e7106649ec23e],
PUP.Optional.CrossRider.A, C:\Users\Justin\AppData\Local\Google\Chrome\User Data\Default\Extensions\ecoccdldklbjglocbgbfpmpehjegkode\0.1_0\icon-16.png, , [dd97c58f413a74c2503e7106649ec23e],
PUP.Optional.CrossRider.A, C:\Users\Justin\AppData\Local\Google\Chrome\User Data\Default\Extensions\ecoccdldklbjglocbgbfpmpehjegkode\0.1_0\icon-48.png, , [dd97c58f413a74c2503e7106649ec23e],
PUP.Optional.CrossRider.A, C:\Users\Justin\AppData\Local\Google\Chrome\User Data\Default\Extensions\ecoccdldklbjglocbgbfpmpehjegkode\0.1_0\jquery-1.10.2.min.js, , [dd97c58f413a74c2503e7106649ec23e],
PUP.Optional.CrossRider.A, C:\Users\Justin\AppData\Local\Google\Chrome\User Data\Default\Extensions\ecoccdldklbjglocbgbfpmpehjegkode\0.1_0\manifest.json, , [dd97c58f413a74c2503e7106649ec23e],
PUP.Optional.CrossRider.A, C:\Users\Justin\AppData\Local\Google\Chrome\User Data\Default\Extensions\ecoccdldklbjglocbgbfpmpehjegkode\0.1_0\tweetwiki.js, , [dd97c58f413a74c2503e7106649ec23e],
PUP.Optional.CrossRider.A, C:\Users\Justin\AppData\Local\Google\Chrome\User Data\Default\Extensions\ecoccdldklbjglocbgbfpmpehjegkode\0.1_0\_DS_Store, , [dd97c58f413a74c2503e7106649ec23e],
Physical Sectors: 0
(No malicious items detected)

Hi,
All of the attached DMP files are of the
WHEA_UNCORRECTABLE_ERROR (124) bug check.
A fatal hardware error has occurred. This fatal error displays data from the Windows Hardware Error Architecture (WHEA).
If we run an !errrec on the 2nd parameter of the bug check (address of the WER structure) we get the following:
BugCheck 124, {0, 867d2024, b2000010, 10c0f}
===============================================================================
Section 2 : x86/x64 MCA
Descriptor @ 867d2134
Section @ 867d22bc
Offset : 664
Length : 264
Flags : 0x00000000
Severity : Fatal
Error : BUSLG_OBS_ERR_*_NOTIMEOUT_ERR (Proc 0 Bank 4)
Status : 0xb200001000010c0f
This is a pretty complicated error compared to other possibilities it could have been, as it implies you have a hardware fault somewhere along the bus (not very definitive on its own).
In our case however, we can go a bit deeper with this one:
0: kd> .formats 0xb200001000010c0f
Evaluate expression:
Hex: b2000010`00010c0f
Decimal: -5620492266238833649
Octal: 1310000001000000206017
Binary: 10110010 00000000 00000000 00010000 00000000 00000001 00001100 00001111
Chars: ........
Time: ***** Invalid FILETIME
Float: low 9.61613e-041 high -7.45059e-009
Double: -7.41853e-068
Now that we have this info, we'd refer to the AMD manual:
63 VAL Valid
62 OVER Status Register Overflow
61 UC Uncorrected Error
60 EN Error Condition Enabled
59 MISCV Miscellaneous-Error Register Valid
58 ADDRV Error-Address Register Valid
57 PCC Processor-Context Corrupt
56–32 Other Information
31–16 Model-Specific Error Code
15–0 MCA Error Code
In our specific case, bit 63 of the status code is set, so it is valid. Bit 62 of the status code is
unset, therefore there's no overflow. Bit 61 implies an uncorrected error has occurred, and Bit 60 implies an error condition was enabled. Last but not least, Bit 57 is
set and implies a corrupted processor context.
If we take a look at the last 15 bits of the binary:
Binary: [trimming] 00001100 00001111
In our case, the MSB in binary (00001100 ), implies a bus error occurred (as I mentioned above). We need to further decode the bits to understand more:
[0000]1100 00001111
0000 = 1PPT RRRR IILL.
PP = Participation Processor, T = Timeout,
R = Memory Transaction Type, I = Memory and/or I/O, and finally
L = Cache Level.
With this said, it appears we actually have a faulty motherboard as the processor seems fine, etc. The only other thing I see possible is bad RAM, which you can figure out whether or not is the case by running no less than ~8 passes of Memtest:
Memtest86+:
Download Memtest86+ here:
http://www.memtest.org/
Which should I download?
You can either download the pre-compiled ISO that you would burn to a CD and then boot from the CD, or you can download the auto-installer for the USB key. What this will do is format your USB drive, make it a bootable device, and then install the necessary
files. Both do the same job, it's just up to you which you choose, or which you have available (whether it's CD or USB).
Do note that some older generation motherboards do not support USB-based booting, therefore your only option is CD (or Floppy if you really wanted to).
How Memtest works:
Memtest86 writes a series of test patterns to most memory addresses, reads back the data written, and compares it for errors.
The default pass does 9 different tests, varying in access patterns and test data. A tenth test, bit fade, is selectable from the menu. It writes all memory with zeroes, then sleeps for 90 minutes before checking to see if bits have changed (perhaps because
of refresh problems). This is repeated with all ones for a total time of 3 hours per pass.
Many chipsets can report RAM speeds and timings via SPD (Serial Presence Detect) or EPP (Enhanced Performance Profiles), and some even support changing the expected memory speed. If the expected memory speed is overclocked, Memtest86 can test that memory performance
is error-free with these faster settings.
Some hardware is able to report the "PAT status" (PAT: enabled or PAT: disabled). This is a reference to Intel Performance acceleration technology; there may be BIOS settings which affect this aspect of memory timing.
This information, if available to the program, can be displayed via a menu option.
Any other questions, they can most likely be answered by reading this great guide here:
http://forum.canardpc.com/threads/28864-FAQ-please-read-before-posting
Regards,
Patrick
“Be kind whenever possible. It is always possible.” - Dalai Lama

Wine secur32.dll/gnutls crash

Hi,
Getting a consistent crash running Dungeons and Dragons Online in Wine. It will happen within a couple minutes usually before I even fully load into the character and sometimes just waiting on the character selection screen. Been taking intermittent runs at troubleshooting it without any success and at the point that it is either bitrot on my install or bug(s).
Tried downgrading the usual suspects, kernel, gnutls, libasn, xorg, nvidia, etc. Currently up to date running all testing repos. Can not downgrade wine because of a 'feature' introduced by Turbine to anything under 1.5.17 with a small patch, but currently running a wine-git AUR compile.
Tried wine64 and wine32 binaries and prefixes. Tried reinstalling the game into new wine prefix directories with same result. Hardware is pretty generic i5 CPU, Nvidia 560, no other crashes in Wine or native apps, 3d or not, even Netflix works.
Can get new dumps on demand. Any hints or insights are appreciated, even a yep it's broken file a bug report will do.
Thanks
The memory addresses change but the files are always the same.
*** glibc detected *** dndclient.exe: malloc(): memory corruption: 0xefa087a0 ***
======= Backtrace: =========
/usr/bin/../lib32/libc.so.6(+0x75932)[0xf752e932]
/usr/bin/../lib32/libc.so.6(+0x773aa)[0xf75303aa]
/usr/bin/../lib32/libc.so.6(+0x78308)[0xf7531308]
/usr/bin/../lib32/libc.so.6(realloc+0xe7)[0xf75323d7]
/usr/lib32/libgmp.so.10(__gmp_default_reallocate+0x2a)[0x7dbb9f2a]
/usr/lib32/libgmp.so.10(__gmpz_realloc+0x56)[0x7dbce126]
/usr/lib32/libgmp.so.10(__gmpz_tdiv_r+0x246)[0x7dbd0ae6]
/usr/lib32/libgmp.so.10(__gmpz_mod+0x4f)[0x7dbcb2bf]
/usr/lib32/libgnutls.so.28(+0xd6e26)[0x7dd42e26]
/usr/lib32/libgnutls.so.28(+0xd67f6)[0x7dd427f6]
/usr/lib32/libgnutls.so.28(+0xd6341)[0x7dd42341]
/usr/lib32/libgnutls.so.28(+0xd548f)[0x7dd4148f]
/usr/lib32/libgnutls.so.28(+0xd56bb)[0x7dd416bb]
/usr/lib32/libgnutls.so.28(+0xcefe0)[0x7dd3afe0]
/usr/lib32/libgnutls.so.28(+0xb2916)[0x7dd1e916]
/usr/lib32/libgnutls.so.28(+0xb2aab)[0x7dd1eaab]
/usr/lib32/libgnutls.so.28(+0x25798)[0x7dc91798]
/usr/lib32/libgnutls.so.28(gnutls_handshake+0x66a)[0x7dc8ed4a]
/usr/bin/../lib32/wine/secur32.dll.so(+0x1f55c)[0x7e2c455c]
/usr/bin/../lib32/wine/secur32.dll.so(+0x1dfe0)[0x7e2c2fe0]
/usr/bin/../lib32/wine/secur32.dll.so(InitializeSecurityContextW+0x120)[0x7e2ca730]
[0x293bc3e]

I get the same problem with Football Manager 2013
*** glibc detected *** C:\Program Files\Steam\steamapps\common\Football Manager 2013\fm.exe: malloc(): memory corruption: 0xf7205340 ***
======= Backtrace: =========
/usr/bin/../lib32/libc.so.6(+0x75932)[0xf74c3932]
/usr/bin/../lib32/libc.so.6(+0x773aa)[0xf74c53aa]
/usr/bin/../lib32/libc.so.6(+0x78308)[0xf74c6308]
/usr/bin/../lib32/libc.so.6(realloc+0xe7)[0xf74c73d7]
/usr/lib32/libgmp.so.10(__gmp_default_reallocate+0x2a)[0x7d4c2f2a]
/usr/lib32/libgmp.so.10(__gmpz_realloc+0x56)[0x7d4d7126]
/usr/lib32/libgmp.so.10(__gmpz_tdiv_r+0x246)[0x7d4d9ae6]
/usr/lib32/libgmp.so.10(__gmpz_mod+0x4f)[0x7d4d42bf]
/usr/lib32/libgnutls.so.28(+0xd9246)[0x7d64f246]
/usr/lib32/libgnutls.so.28(+0xd8c16)[0x7d64ec16]
/usr/lib32/libgnutls.so.28(+0xd8761)[0x7d64e761]
/usr/lib32/libgnutls.so.28(+0xd78af)[0x7d64d8af]
/usr/lib32/libgnutls.so.28(+0xd7adb)[0x7d64dadb]
/usr/lib32/libgnutls.so.28(+0xd1400)[0x7d647400]
/usr/lib32/libgnutls.so.28(+0xb4d36)[0x7d62ad36]
/usr/lib32/libgnutls.so.28(+0xb4ecb)[0x7d62aecb]
/usr/lib32/libgnutls.so.28(+0x25ae8)[0x7d59bae8]
/usr/lib32/libgnutls.so.28(gnutls_handshake+0x66a)[0x7d59909a]
/usr/bin/../lib32/wine/secur32.dll.so(+0x1f55c)[0x7dcea55c]
/usr/bin/../lib32/wine/secur32.dll.so(+0x1dfe0)[0x7dce8fe0]
/usr/bin/../lib32/wine/secur32.dll.so(InitializeSecurityContextW+0x120)[0x7dcf0730]
[0x3d9c17e]

Access Denied AcroIEHelper.dll AcroPDF.dll and pdfshell.dll

I have bits and pieces of earlier versions of Adobe Reader on my computer, so before I downloaded the latest version, version 9, I tried to remove the earlier versions. I had to do it manually and seem to have removed all the bits and pieces recommended in the tech notes but I CANNOT REMOVE AcroIEHelper.dll AcroPDF.dll and pdfshell.dll from Program files\common files\Adobe\Acrobat\ActiveX I can see that other people have had this problem but there doesn't seem to be an obvious and foolproof way of doing it. (I tried the Microsoft Installer Cleanup Utility and nearly wrecked my computer - Word froze and disappeared altogether off my list of programs!)

Could not delete pdfshell.dll, but this worked (in Win XP):
1. Close all programs.
2. Open a command prompt window: Start > Run. Enter cmd.
3. Open Task Mgr.
4. Select explorer.exe and End Process. Yes to Warning. Desktop goes away.
5. In the command prompt window (remember your DOS commands) and go to the directory and delete the file. Apparently this works because explorer.exe is not running.
6. Restart Explorer: In the Task Mgr., File > New Task. Type explor.exe.

Captivate 6 Errors: Missing file libwinpthread-1.dll and The Application was unable to start correctly (0xc000007b) on Windows 2008 R2

Hi,
I have a problem with Captivate 6 installation on Windows Server 2008 R2. I have 2 different scenarios where I tested but the result is same.
1- I used AMEE (Application Manager Enterprise 3.1) to create the installation Package to deploy through SCCM 2012.
Notice that the current package works fine on Windows7 (x86 & x64) but not on 2008 R2 due to an error after I try to launch Captivate.exe application.
The error states that there's a Missing file: libwinpthread-1.dll and if I copy and made a registration of this .DLL file then it sends another error saying: The Application was unable to start correctly (0xc000007b) so it never let me launch the application.
2- Now if I install the package directly from the Original sources(CD) without creating any AMEE package after completing the installation I still have the same error about the DLL missing file.
Is there any fix or workaround to install Captivate 6 on Win2008 R2 ?
Thanks in advance & kind regards.

Wow, No replies so far !!
Any one ??

I was recently prompted to update my Itunes player to the latest version. I'm using Windows Vista. I was left with an error message MSVCR80.dll and consequently no new update. I uninstalled the old version and have tried to reinstall manually. No luck

I was recently prompted to update my Itunes player to the latest version. I'm using Windows Vista. I was left with an error message MSVCR80.dll and consequently no new update. I uninstalled the old version and have tried to reinstall manually several times. No luck. Consequently I have no player.
Any ideas for a fix?

Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2

Software Update Point doesn't show Win 2012 R2 and Windows 8.1 updates

I started deploying Windows 2012 R2 Datacenter servers and some Windows 8.1 workstations. I wanted to make sure that my Software Update Point was downloading updates available to those OS's and after going in to Administration -> Overview -> Site Configuration
-> Sites -> Configure Site Components -> Software Update Point, I notice that those OS's weren't available to select.
I then did some searches on the web and thought my problem was two fold:
1 - I was using SCCM 2012 SP1.
2 - My SCCM 2012 Software Update Point was on a Win 2008 R2 server
So the first thing I did was upgrade from SCCM 2012 SP1 to SCCM 2012 R2. I then created a Windows 2012 R2 Datacenter server and installed WSUS on it. I then added the server as a Site System Server, added the Software Update Point to it and configured it.
Unfortunately, this still didn't help me as you can see from the screen shots below:
What am I doing wrong and what needs to be done to have all the updated Operating Systems and Microsoft Software added to my Product list?
Thanks... Frank

To follow on to narcoticoo's statement, have you actually initiated a catalog sync from within the ConfigMgr console yet? If so, has it completed successfully (you can check the moniotring workspace or you can watch the wsyncmgr.log).
Jason | http://blog.configmgrftw.com
Jason...
I just ran a Synchronize Software Updates from ConfigMgr Console. I then went Monitoring -> Software Update Point Sync Status. It's showing my new WSUS server ( 2012 R2 ) but it's not showing any updates are being sync'd through it. See this screen shot:
I then went to the wsyncmgr.log file on my site server which is the OLD WSUS server ( Win 2008 R2 ) and say this:
STATMSG: ID=6703 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_WSUS_SYNC_MANAGER" SYS=PREP-SCCM12.<domain.org> SITE=STA PID=5224 TID=4028 GMTDATE=Wed Feb 26 19:00:40.236 2014 ISTR0="getSiteUpdateSource" ISTR1="WSUS update source not found on site STA. Please refer to WCM.log for configuration error details." ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0 $$<SMS_WSUS_SYNC_MANAGER><02-26-2014 14:00:40.236+300><thread=4028 (0xFBC)>
Sync failed. Will retry in 60 minutes $$<SMS_WSUS_SYNC_MANAGER><02-26-2014 14:00:40.279+300><thread=4028 (0xFBC)>
Setting sync alert to active state on site STA $$<SMS_WSUS_SYNC_MANAGER><02-26-2014 14:00:40.313+300><thread=4028 (0xFBC)>
Sync time: 0d00h00m00s $$<SMS_WSUS_SYNC_MANAGER><02-26-2014 14:00:40.360+300><thread=4028 (0xFBC)>
Deleting file \\?\UNC\prep-dpsccm12\WSUS Updates\Win 7 Updates up to Aug 2012\0048da55-f46f-4452-b4c1-37c0f295333b\IE9-langpack-Windows7-x86-xho.exe, FAILED, Win32 Error = 5 $$<SMS_WSUS_SYNC_MANAGER><02-26-2014 14:00:41.042+300><thread=4028 (0xFBC)>
Failed to delete orphaned content folder \\prep-dpsccm12\WSUS Updates\Win 7 Updates up to Aug 2012, error 0x5 $$<SMS_WSUS_SYNC_MANAGER><02-26-2014 14:00:41.067+300><thread=4028 (0xFBC)>
Deleting file \\?\UNC\prep-dpsccm12\WSUS Updates\Win2k8 Updates Until Aug 2012\000f8a0a-825c-457b-a15b-57ade145a09b\windows6.0-kb2653956-x64.cab, FAILED, Win32 Error = 5 $$<SMS_WSUS_SYNC_MANAGER><02-26-2014 14:00:41.119+300><thread=4028 (0xFBC)>
Failed to delete orphaned content folder \\prep-dpsccm12\WSUS Updates\Win2k8 Updates Until Aug 2012, error 0x5 $$<SMS_WSUS_SYNC_MANAGER><02-26-2014 14:00:41.144+300><thread=4028 (0xFBC)>
Deleting file \\?\UNC\prep-dpsccm12\WSUS Updates\Win 7 Updates for Sept 2012\10f3ec1c-f096-4a82-ae41-440ba5328467\Windows6.1-RTM-Client-NEUTRAL-X86.EXE, FAILED, Win32 Error = 5 $$<SMS_WSUS_SYNC_MANAGER><02-26-2014 14:00:41.173+300><thread=4028 (0xFBC)>
Failed to delete orphaned content folder \\prep-dpsccm12\WSUS Updates\Win 7 Updates for Sept 2012, error 0x5 $$<SMS_WSUS_SYNC_MANAGER><02-26-2014 14:00:41.199+300><thread=4028 (0xFBC)>
Deleting file \\?\UNC\prep-dpsccm12\WSUS Updates\XP Updates Until Sept 30\17165524-99fa-49f7-91e6-457d43d4a48e\Windows-KB890830-V4.12.exe, FAILED, Win32 Error = 5 $$<SMS_WSUS_SYNC_MANAGER><02-26-2014 14:00:41.228+300><thread=4028 (0xFBC)>
Failed to delete orphaned content folder \\prep-dpsccm12\WSUS Updates\XP Updates Until Sept 30, error 0x5 $$<SMS_WSUS_SYNC_MANAGER><02-26-2014 14:00:41.254+300><thread=4028 (0xFBC)>
It appears to me that when doing a Sync, it's still trying to use my OLD WSUS server instead of my new one. I removed the Software Update Point from the OLD WSUS server and uninstalled WSUS from it. I'm not sure why it's still trying to sync from the old
server rather than the new one. Any ideas?
Thanks... Frank

MacBook Windows7 install failing - ntkrnlpa.exe - "Windows failed to load because the kernel is missing, or corrupt."

Trying to do BootCamp Windows-7 install on my MacBook (running 10.5.x).
Detailed progress notes here. Latest: "Windows failed to load because the kernel is missing, or corrupt." (ntkrnlpa.exe) Hit `Enter` to continue, make next selection, but it comes back to error message. So shut down (power button) then reboot with Windows DVD still in there. Ended up with same error!

Best thing to do is nuke the drive, then reinstall Vista again.
I know this is a long process but should get you back running again.
Linux makes odd partitions that recovery does not understand and they don't get deleted properly, boot and nuke will take care of that.

Creating dll and calling it in labview crashing the program

Hi All,
I am using labview from quite a long time.But this time i am stuck with dll.Not able to solve this issue.
I have to communicate with FTDI chip.
I have a VC++ Project to communicate with SPI of FTDI.That Code is working perfectly fine.
Now I Have to automate that through LabVIEW. VISA Drivers i cant use in this. So Last option left is either to create dll or to make EXE out of it.
I have tried by creating DLL and then calling it in LabVIEW by using Call Library Function Node.But its not helping me out every time LabVIEW is getting Crashed.
Is there error in creation of dll or something i am not doing properly while calling?
Thanks In Advance
Shweta
Attachments:
old_dolphin_sub_spi_func_ftdi.c ‏21 KB
ftdi_write_read.vi ‏15 KB

Which function call crashes LabVIEW?
Have you tried switching the calling convention from stdcall to C for all of the DLL calls?
Why are you converting a string to a number, instead of using a numeric constant directly? If you want a number in hex, you can right-click a numeric constant, make the radix visible, and switch it to hex display.

EMET 5.1 crashes Outlook.exe, Photoshop.exe and Communicator.exe. Please explain why it would do that?

Hi,
EMET 5.1 is crashing/not opening these applications on two of our staff workstations (Both are Windows 7 x86): Outlook.exe, Photoshop.exe and Communicator.exe.
One computer, EMET crashes Communicator and Outlook. The other Computer, the EMET crashes Photoshop only.
Obviously, it works for everybody else. Can someone please explain to me why would EMET crash these apps if it works for the rest? Could it be that it found a possible threat/exploit to the machine?
How do I mitigate this problem?
Please advise. Below is a sample of the error.
Fault bucket 1031393421, type 17
Event Name: APPCRASH
Response: Not available
Cab Id: 0
Problem signature:
P1: communicator.exe
P2: 4.0.7577.4103
P3: 4fd6bebb
P4: EMET.DLL
P5: 5.0.0.0
P6: 545ffd74
P7: c0000005
P8: 00060310
P9:
P10:
Attached files:
C:\Users\xx\AppData\Local\Temp\WERD21D.tmp.WERInternalMetadata.xml
These files may be available here:
C:\Users\xx\AppData\Local\Microsoft\Windows\WER\ReportArchive\AppCrash_communicator.exe_7fba75e97ffde076db3fe52dd74029de19dc38_15d4e56e
Analysis symbol:
Rechecking for solution: 0
Report Id: 97ed67e2-de0a-11e4-822e-00125a5e8f35
Report Status: 0
Faulting application name: Photoshop.exe, version: 15.2.2.310, time stamp: 0x5480306d
Faulting module name: EMET.DLL, version: 5.0.0.0, time stamp: 0x545ffd74
Exception code: 0xc0000005
Fault offset: 0x0006714e
Faulting process id: 0x15c4
Faulting application start time: 0x01d0721e6fc383e7
Faulting application path: C:\Program Files\Adobe\Adobe Photoshop CC 2014 (32 Bit)\Photoshop.exe
Faulting module path: C:\WINDOWS\AppPatch\EMET.DLL
Report Id: b159a74a-de11-11e4-86b9-1cc1de578f37

One guess is that old Outlook plugins can sometimes cause issues with EMET. Try starting Outlook in safe mode, by holding down the CTRL key when starting Outlook to see if that helps, and look in Outlook in File / Options / Add-Ins menu item to see
the add-ons that are installed. Verify that the OS and apps have all the latest patches if you haven't, though you have probably already done that. If those don't work you could try unchecking the EMET application protection boxes for the
application that isn't working, one by one. Note that EMET 5.2 is out now so that might be something to try too.

Bsod win 7 halmacpi.dll and ntkrnlpa.exe

Similar Messages

Maybe you are looking for