BSOD with ntkrnlpa.exe

Hi guys,
I've had a BSOD caused by ntkrnlpa.exe and I would like to know if you can find out what exactly (probably some driver?) caused the crash? I can attach files later if this is possible.
Thanks, Hakosuka

Hi,
Here are some suggestions you can try:
1. Please boot into Clean
Boot Mode and Safe Mode
test the issue again.
2. Update your Chipset driver to the latest and see how it works.
If it works fine in Clean Boot, the root cause can be the third party software. If the issue reoccurs in Clean Boot, but works fine in Safe Mode,
the cause can be the disabled hardware drivers. You may narrow down the causes in Device Clean Boot.
Device Clean Boot
=================
1. Click Start, type "devmgmt.msc" (without quotation marks) in the Search bar and press Enter.
2. Expand "Sound, video and game controllers".
3. Right click on your sound card and then click "Properties.
4. In the dropdown menu of Device Usage, please choose "Do not use this device (disable)" and click OK.
5. Please use the same method to disable other dubious hardware such as: internal modem, network card and CD-R drive. Please note some devices such as video adapter are not available to
be disabled.
In addition, it is recommended to connect the Beckhoff for assistance. Beckhoff should be the best resource for this. Thank you for your understanding.
Tracy Cai
TechNet Community Support

Similar Messages

Ntkrnlpa.exe 22fa3 causing bsod at point of final shutdown

My minidump file says: "ntkrnlpa.exe+22fa3" has caused the BSOD.
This BSOD appears at the final point of shut down / restart.
Other syptoms:
This DC7700p using SP3 is running slowly - memory seems to over used.
I have run Malwarebytes, CCleaner, SuperSpyware and NIS is loaded on this machine.
All report "no problems"
Also my USB mouse is affecting the audio when moved.
The later may just be just lack of memory.
System:
O/s build 2600 lang: 0809
RAM 3.6GB
Bios 786e1 vo3.07
Tried replacing SP3 and every other thing I have found to sort this problem.
Fed up reading and searching for the answer.
Any thoughts

Hi Silverfox1947,
I was wondering when was the last time your system was defragmented? Here is a document on how to defragment your disk drive volumes in Windows XP.
http://support.microsoft.com/kb/314848
If that does not work the next step would be to do a system restore. Here is a link on how to do that.
http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/app_system_restore_hs...
Hope it helps.
Thanks
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Re-Occurring Blue Screen~Dump files included~Please Help~Unable to verify timestamp for ntkrnlpa.exe

Hello,
Starting yesterday I started getting the BSOD. I have uploaded my dump files to this dropbox account:
www.dropbox.com/sh/w3ryago8pfcw2y2/AAAR5i6Crx5q-p--xdESJjnMa
There are lots of them as my PC crashed many times.
I attempted to analyze them with windbg but all I can see is:
Unable to load image \SystemRoot\system32\ntkrnlpa.exe, Win32 error 0n2
*** WARNING: Unable to verify timestamp for ntkrnlpa.exe
Also I ran sfc /scannow and it found no integrity violations.
After the first BSOD I was barely able to get Windows to load without another immediate crash. I couldn't boot my PC last night but today seems okay so far. CPU temp was fine, actually quite cool as I had my window open right by the PC with the side off
the case and it was cold last night. Today, so far, seems to be running okay...so far anyways..
Windows update recently installed a driver for my on-board video card (Nvidia GeForce 6150n) on the 18th I think as I started using a 2nd monitor using the on-board card in addition to my PCI Express Ati Radeon HD. To use the second screen, I switched
the primary video in CMOS to on-board instead of PCI-E 16x so the on-board Nvidia card would be enabled.
I also installed brand new ram (4gb DDR2) about a month ago
and a new power supply 2 months ago. The power supply is not "exactly" the same voltage as the one that was in there but it's dang close. But I don't have any power leeching components.
Other than that nothing new has happened. After I got the crash, I tried to enter CMOS yesterday and it glitched out on me twice. I hope it's not my motherboard..
I am willing to do a system re-format as I am running Windows 7 32bit on a 64bit AMD so I wouldn't mind having 64 bit Windows anyways but I'd like to know what the problem is before I do this. Thank you.
Update: Just did a MalwareByte's Anti-Malware scan and no malware but found these items:
Scan Date: 5/22/2014
Scan Time: 6:08:00 PM
Logfile:
OS: Windows 7 Service Pack 1
CPU: x86
File System: NTFS
Scan Type: Threat Scan
Result: Completed
Objects Scanned: 261539
Time Elapsed: 8 min, 10 sec
Processes: 0
(No malicious items detected)
Modules: 0
(No malicious items detected)
Registry Keys: 0
(No malicious items detected)
Registry Values: 0
(No malicious items detected)
Registry Data: 0
(No malicious items detected)
Folders: 2
PUP.Optional.CrossRider.A, C:\Users\Justin\AppData\Local\Google\Chrome\User Data\Default\Extensions\ecoccdldklbjglocbgbfpmpehjegkode, , [dd97c58f413a74c2503e7106649ec23e],
PUP.Optional.CrossRider.A, C:\Users\Justin\AppData\Local\Google\Chrome\User Data\Default\Extensions\ecoccdldklbjglocbgbfpmpehjegkode\0.1_0, , [dd97c58f413a74c2503e7106649ec23e],
Files: 9
PUP.Optional.OptimumInstaller.A, C:\Users\Justin\Downloads\Player-Chrome.exe, , [6b090a4a4437d363a05f361717ea718f],
PUP.Optional.Outbrowse, C:\Users\Justin\Downloads\install-flashplayer.exe, , [561ee173fe7d1125edf4d9a443be5aa6],
PUP.Optional.CrossRider.A, C:\Users\Justin\AppData\Local\Google\Chrome\User Data\Default\Extensions\ecoccdldklbjglocbgbfpmpehjegkode\0.1_0\icon-128.png, , [dd97c58f413a74c2503e7106649ec23e],
PUP.Optional.CrossRider.A, C:\Users\Justin\AppData\Local\Google\Chrome\User Data\Default\Extensions\ecoccdldklbjglocbgbfpmpehjegkode\0.1_0\icon-16.png, , [dd97c58f413a74c2503e7106649ec23e],
PUP.Optional.CrossRider.A, C:\Users\Justin\AppData\Local\Google\Chrome\User Data\Default\Extensions\ecoccdldklbjglocbgbfpmpehjegkode\0.1_0\icon-48.png, , [dd97c58f413a74c2503e7106649ec23e],
PUP.Optional.CrossRider.A, C:\Users\Justin\AppData\Local\Google\Chrome\User Data\Default\Extensions\ecoccdldklbjglocbgbfpmpehjegkode\0.1_0\jquery-1.10.2.min.js, , [dd97c58f413a74c2503e7106649ec23e],
PUP.Optional.CrossRider.A, C:\Users\Justin\AppData\Local\Google\Chrome\User Data\Default\Extensions\ecoccdldklbjglocbgbfpmpehjegkode\0.1_0\manifest.json, , [dd97c58f413a74c2503e7106649ec23e],
PUP.Optional.CrossRider.A, C:\Users\Justin\AppData\Local\Google\Chrome\User Data\Default\Extensions\ecoccdldklbjglocbgbfpmpehjegkode\0.1_0\tweetwiki.js, , [dd97c58f413a74c2503e7106649ec23e],
PUP.Optional.CrossRider.A, C:\Users\Justin\AppData\Local\Google\Chrome\User Data\Default\Extensions\ecoccdldklbjglocbgbfpmpehjegkode\0.1_0\_DS_Store, , [dd97c58f413a74c2503e7106649ec23e],
Physical Sectors: 0
(No malicious items detected)

Hi,
All of the attached DMP files are of the
WHEA_UNCORRECTABLE_ERROR (124) bug check.
A fatal hardware error has occurred. This fatal error displays data from the Windows Hardware Error Architecture (WHEA).
If we run an !errrec on the 2nd parameter of the bug check (address of the WER structure) we get the following:
BugCheck 124, {0, 867d2024, b2000010, 10c0f}
===============================================================================
Section 2 : x86/x64 MCA
Descriptor @ 867d2134
Section @ 867d22bc
Offset : 664
Length : 264
Flags : 0x00000000
Severity : Fatal
Error : BUSLG_OBS_ERR_*_NOTIMEOUT_ERR (Proc 0 Bank 4)
Status : 0xb200001000010c0f
This is a pretty complicated error compared to other possibilities it could have been, as it implies you have a hardware fault somewhere along the bus (not very definitive on its own).
In our case however, we can go a bit deeper with this one:
0: kd> .formats 0xb200001000010c0f
Evaluate expression:
Hex: b2000010`00010c0f
Decimal: -5620492266238833649
Octal: 1310000001000000206017
Binary: 10110010 00000000 00000000 00010000 00000000 00000001 00001100 00001111
Chars: ........
Time: ***** Invalid FILETIME
Float: low 9.61613e-041 high -7.45059e-009
Double: -7.41853e-068
Now that we have this info, we'd refer to the AMD manual:
63 VAL Valid
62 OVER Status Register Overflow
61 UC Uncorrected Error
60 EN Error Condition Enabled
59 MISCV Miscellaneous-Error Register Valid
58 ADDRV Error-Address Register Valid
57 PCC Processor-Context Corrupt
56–32 Other Information
31–16 Model-Specific Error Code
15–0 MCA Error Code
In our specific case, bit 63 of the status code is set, so it is valid. Bit 62 of the status code is
unset, therefore there's no overflow. Bit 61 implies an uncorrected error has occurred, and Bit 60 implies an error condition was enabled. Last but not least, Bit 57 is
set and implies a corrupted processor context.
If we take a look at the last 15 bits of the binary:
Binary: [trimming] 00001100 00001111
In our case, the MSB in binary (00001100 ), implies a bus error occurred (as I mentioned above). We need to further decode the bits to understand more:
[0000]1100 00001111
0000 = 1PPT RRRR IILL.
PP = Participation Processor, T = Timeout,
R = Memory Transaction Type, I = Memory and/or I/O, and finally
L = Cache Level.
With this said, it appears we actually have a faulty motherboard as the processor seems fine, etc. The only other thing I see possible is bad RAM, which you can figure out whether or not is the case by running no less than ~8 passes of Memtest:
Memtest86+:
Download Memtest86+ here:
http://www.memtest.org/
Which should I download?
You can either download the pre-compiled ISO that you would burn to a CD and then boot from the CD, or you can download the auto-installer for the USB key. What this will do is format your USB drive, make it a bootable device, and then install the necessary
files. Both do the same job, it's just up to you which you choose, or which you have available (whether it's CD or USB).
Do note that some older generation motherboards do not support USB-based booting, therefore your only option is CD (or Floppy if you really wanted to).
How Memtest works:
Memtest86 writes a series of test patterns to most memory addresses, reads back the data written, and compares it for errors.
The default pass does 9 different tests, varying in access patterns and test data. A tenth test, bit fade, is selectable from the menu. It writes all memory with zeroes, then sleeps for 90 minutes before checking to see if bits have changed (perhaps because
of refresh problems). This is repeated with all ones for a total time of 3 hours per pass.
Many chipsets can report RAM speeds and timings via SPD (Serial Presence Detect) or EPP (Enhanced Performance Profiles), and some even support changing the expected memory speed. If the expected memory speed is overclocked, Memtest86 can test that memory performance
is error-free with these faster settings.
Some hardware is able to report the "PAT status" (PAT: enabled or PAT: disabled). This is a reference to Intel Performance acceleration technology; there may be BIOS settings which affect this aspect of memory timing.
This information, if available to the program, can be displayed via a menu option.
Any other questions, they can most likely be answered by reading this great guide here:
http://forum.canardpc.com/threads/28864-FAQ-please-read-before-posting
Regards,
Patrick
“Be kind whenever possible. It is always possible.” - Dalai Lama

MacBook Windows7 install failing - ntkrnlpa.exe - "Windows failed to load because the kernel is missing, or corrupt."

Trying to do BootCamp Windows-7 install on my MacBook (running 10.5.x).
Detailed progress notes here. Latest: "Windows failed to load because the kernel is missing, or corrupt." (ntkrnlpa.exe) Hit `Enter` to continue, make next selection, but it comes back to error message. So shut down (power button) then reboot with Windows DVD still in there. Ended up with same error!

Best thing to do is nuke the drive, then reinstall Vista again.
I know this is a long process but should get you back running again.
Linux makes odd partitions that recovery does not understand and they don't get deleted properly, boot and nuke will take care of that.

BSOD with error 0xc000001 on my Hp elite book

I have to get this working by tomorrow so I'm quite anxious but heres the story.
My Hp elitebook folio 9470m has died on me last Friday and said it had to restart, when it did it gave me a blank black screen only after letting it rest for a day did it show me a BSOD with the error 0xc00000f, and after pressing enter, the message saying that winload.exe is missing or corrupt comes up. I've tried to use the disk but when I press enter, the screen just refreshes itself but does nothing otherwise.
Would appreciate any help to make my lap top starting again. I dont care whether it's a forced wipe as long as I can get it working ASAP! Thanks in advance!

Hello Airztonne,
Your computer will not boot.
Do a hard reset.
Turn the computer off.
Remove the power cable and the battery.
Hold down the power button for 15 sec while booth power sources are removed.
This should reset the hardware in the computer.
As you power it back on tap the F2 key. This will load hardware diagnostics.
Run the startup test.
This will test all the hardware in the system and detect any problems.
If the entire tests pass, turn off the computer.
As you turn it back on tap the F10 key. This will load BIOS setup utility.
Press F9 to load defaults.
Press F10 to save and exit.
When the computer boots back up, check to see if everything is working.
If your still not able to boot you can try to restore the computer to factory setting by tapping the F11 key as you power on the computer, and selecting the recovery options.
Let me know how everything goes.

I am trying to install my CS4 Suite onto new PC with Windows 8. It installed Photoshop but nothing else. It is asking me to "Install with 'setup.exe'" Which i dont think is on there. Is there a way around this? Thanks in advance.

I am trying to install my CS4 Suite onto new PC with Windows 8. It installed Photoshop but nothing else. It is asking me to "Install with 'setup.exe'" Which i dont think is on there. Is there a way around this? Thanks in advance.

Run the cleaner tool and reinstall with sufficient user privileges and security stuff turned off. Your install went wrong because you didn't consider this.
Mylenium

IPod Touch gives BSOD with iTunes 8 and Windows Vista

For almost a year I have used my iPod Touch (v1.1.3) and Nano with Windows Vista and iTunes almost perfectly. This was until last week when I upgraded to v8.
Now iTunes still works well with the Nano but i get the BSOD when I try and plug in the Touch. I have never had the BSOD with Vista until now.
I have read that alot of other people are having a similar problem. Is there a fix to this? New driver?
Please tell me Apple are aware of this problem and generating a fix if its not already done.
many thanks

I have a similar problem, with my new iPod Touch crashing an XP Professional setup. It's worth noting that the Apple article also talks about potential USB conflicts with other devices on the system that might have bad drivers. They say the solution, if that is the fault, is to make sure all your USB drivers are good. I'll try that, by a process of elimination, before re-installing iTunes (as I thought I had the latest version and I don't have Vista). I'll come back here later to report the outcome.
(serious if your iPod crashed your PC - can't even charge its battery ! )

How to open a pdf with a ".exe" extension?

Hi everyone,
I am new. Someone just sent me a document they created in Acrobat 9 pro. They say it is a password protected pdf. When I click open or download, it changes from 1 KB to 28 bytes and displays a message that the content has been deleted. I would really appreciate any insights!
In case it helps, I am using Windows 7 and have Acrobat XI Pro. Thanks.

If it was a PDF with a .exe extension I suspect you have just been injected with Virsus, Worm, Trogan Horse or some other malware. A PDF if it’s a true PDF will only have pdf extension. When some one says it’s a Pdf but say it will be sent as exe file don't download it. Or if itd ownloaded don't open it trash it immediately.

How to get Class Name given along with java.exe

Hi friends,
I am Mukesh, currently facing one problem
On command prompt to execute any java program we give :
C : \.-- > java ClassName
This ClassName I need in my application, I want to do some post processing on that.
Actually see what I want :
public class Base
static Base object;
public static void main(String[] args) throws Exception
object=(Base)Class.forName("Derived Class Name").newInstance();
void main()
public class Derived extends Base
void main()
System.out.println("Hello World");
I am trying to Run Derived Class, since there is no entry point found, default JVM invoke the Base class's entry point, there I want to load
Derived Class, but I am not getting any identity of derived class in Base class.
I found one temporary solution to this problem :
C: \ -- >java Derived Derived
& in Base class, I have loaded class
object=Class.forName(args[0]).newInstance();
But I dont want to write the same thing twise just to know the Class name which is given along with java.exe.
Is there any way to get the ClassName supplied with java.exe
I have tried a lot, still I am trying !!!
If any one knows the answer, help me.
Regards.
Mukesh.

Multiple post. Please continue in other thread
http://forum.java.sun.com/thread.jspa?threadID=5196980&tstart=0

Calling an rss script with rs.exe fails to result in a report pdf from VB6 w/ ShellEx.

Sql 2008 R2
Calling an rss script with rs.exe fails to result in a report pdf from VB6 w/ ShellEx.
If I call rs.exe with the various parameters from the command prompt I have success(other than rs.exe using the temp folder, which is a different issue). But when I try to execute the same process from a Visual Basic 6.0 application utilizing
the ShellEx api call, the report creation and output to PDF format do not occur. There is no error raised.
Yes, I wish I could use a newer dev tool but that isn't an option right now. I think this should work. Can ya'll tell me what I'm doing wrong?
sArgs = "-i " & Chr(34) & "'C:\Program Files\Dura Supreme\OrderEntry\RunOrdReports.rss'" & Chr(34) & _
" -s 'http://walnut/reportserver' -v 'DuraOrderNum=" & _
Chr(34) & sOrdDuraID & Chr(34) & "' -e Exec2005 -t"
ShellEx Chr(34) & "C:\Program Files\Dura Supreme\OrderEntry\rs.exe" & Chr(34), EShellShowConstants.essSW_SHOWNORMAL, sArgs
TIA,
Jim M.

ShellEx Chr(34) & "C:\Program Files\Dura Supreme\OrderEntry\rs.exe" & ....
Hello Jim,
The path for rs.exe includes spaces, you should set it in hyphen, as you already did for file "RunOrdReports.rss" in variable "sArgs2
Olaf Helper
[ Blog] [ Xing] [ MVP]

I have a problem with ( AppleSyncNotifier.exe - Entry Point Not Found ) The procedure entry point sqlite3_wal_checkpoint could not be locate in the dynamic link library SWLite3.dll.

I have a problem with ( AppleSyncNotifier.exe - Entry Point Not Found ) The procedure entry point sqlite3_wal_checkpoint could not be locate in the dynamic link library SWLite3.dll.

With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
Copy the SQLite3.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
Reboot and see if all is well
In case that your OS is Windows 7 (64 bit)
1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
2. Copy file "SQLite3.dll"
3. Open new windows explorer, to to location C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
4. Paste file "SQLite3.dll" to the location.
5. Reboot your computer, it should not display that message, it should be clear.
Good Luck

Strange issue creating a BCP xml format file with double dagger '‡' (alt + 0135) as column terminator with bcp.exe

Hi,
I'm having issues generating a BCP XML format file using a fairly unusual column terminator, a double dagger symbol
‡ (alt + 0135) which I need to support.
I'm experiencing this problem with bcp.exe for SQL2008 R2 and SQL2012.
If I run the following command line:
bcp MyDB.TMP.Test_Extract format nul -c -x -f "C:\BCP\format_file_dagger_test.xml" -T -S localhost\SQL2012 -t‡
I end up with a XML format file like so:
<?xml version="1.0"?>
<BCPFORMAT xmlns="http://schemas.microsoft.com/sqlserver/2004/bulkload/format" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<RECORD>
<FIELD ID="1" xsi:type="CharTerm" TERMINATOR="ç" MAX_LENGTH="255" COLLATION="SQL_Latin1_General_CP1_CI_AS"/>
<FIELD ID="2" xsi:type="CharTerm" TERMINATOR="ç" MAX_LENGTH="50"
.. and so on.
You will notice that the TERMINATOR="ç" (Minuscule c-cedilla) is output instead of TERMINATOR="‡". The
ç character, is strangely enough is alt + 135 (and not alt + 0135) so this might more than a coincidence! I know you can specify the codepage but this switch applies the data being imported or extracted and not for the format file
itself (I tried it anyway).
In order to use the XML file to bulk import I manually did a text substitution of 'ç' character for '‡' and then BCP imports '‡' data fine.
This character swap doesn't occur if I generate a non XML format file (the '‡' character is output in the format file correctly) however, this file produces other import errors, which I don't encounter if I use a standard delimiter like a comma. So I have stuck
with the working XML format file which I prefer.
Does anyone know why this is happening? I'm planning to automate the generation the of the XML format file and would like to avoid the additional step of text substitution if possible.
Thank you.

Hi Ham09,
According to your description , we do a test and find that the character of the terminator is changed due to the code page of Operation System. When you choose the different time zone in Data and Time bar, and do the same bcp test, you will find it will
export the different TERMINATOR in your XML format file. For example, you can import the character "ç" (alt + 135) in (UTC-12:00)International Date Line West time zone and (UTC+09:00)Osaka, Sapporo, Tokyo time zone, and check if the terminators are different.
By default, the field terminator is the tab character (represented as \t). To represent a paragraph mark, use \r\n.
For more information, there is detail about code page(Windows), you can review the following article.
http://msdn.microsoft.com/en-us/library/windows/desktop/dd317752(v=vs.85).aspx
Regards,
Sofiya Li
Sofiya Li
TechNet Community Support

Execution problem with java.exe

Hi everybody. I am a student in a belgian university, and i've got a problem with the execution of my binaries in the JVM.
I'm developping my project with Eclipse. When I build the project, Eclipse launch perfectly my application with javaw.exe (I supposed it because it's written in the console when I run the project).
Thus, I wanted to try to launch my application by myself, to check if everything is right...
My project is composed like this :
- creavea/src : the sources of my project (a package called "main" , and a package "com.creavea. ..." and other .jar files like a MySQLConnector/J, edtFTPj, the JOutlookBar by lf2prod, ...
- creavea/bin : Eclipse puts the binaries there, when I run my project.
- creavea/files : Somes files like configuration files for my application, etc ...
- creavea/images : Images for my interface.
- the main class, containing the pubilc static void main method, is called CreaGesta, and is in the "main" package.
creavea is the name of my project, but i think you supposed it !
I want to run the binaries, then i do this :
- I open a ms-dos console
- I'm going in the C:\eclipse\workspace\creavea\bin folder
- I execute the command : java main.CreaGesta ...
And it doesn't work :'( ! An error appears :
Exception in thread "main" java.lang.NoClassDefFoundError : com/lf2prod/common/swing/JOutlookBar.
This class, JOutlookBar is used by my application, and the jar file containing the class is in my /bin folder. I can't understand, i'm a little bit disapointed.
It's my first big project in Java, then i don't really understand what's happening. So if someone can help me, it will be really nice for me ! Thanks a lot for your help !
J�r�me - Belgium

Thank you for your reply Atmguy ! I put in my command the classpath of the jar's who are in my /bin folder.
Like this : java -classpath edtftpj-1.4.9.jar; jdom.jar;l2fprod-common-outlookbar.jar;mysql-connector-java-3.1.8-bin.jar main.CreaGesta But now, i've got an other error message :
Exception in thread "main" java.lang.NoClassDefFoundError : main/CreaGestaOh, it changed ! but I don't understand the problem . What does it mean? "Java cannot find the class main/CreaGesta", or "An error occured in main.CreaGesta" ?
Can somebody help me to solve this new error ? Thank you !

XMAM30 - digital signature - new applet running with MobileEngine.exe

Hello,
I am new to this forum and could not find a solution for my problem.
I would be very happy, if anybody can help me.
I have developed a new applet based on the standard SAP applet for the digital signature in xMAM30. This applet works fine in Microsoft Internet Explorer 6.0 but it doesn't work with the MobileEngine.exe!
I have already read the SAP note 897289 about this topic, but this note was not the solution for my problem. Because the SAP Standard applet (com.sap.mbs.mam.order.control.SignApplet) in the mamsignapplet.jar works fine in MS IE 6 and with MobileEngine.exe.
After several tests I found out, that the problem must be the JAR-file which contains the applet.
I have created a new JAR-File of the SAP applet class: com.sap.mbs.mam.order.control.SignApplet with the same MANIFEST.MF which I found in mamsignapplet.jar. But this new JAR-file doesn't work with MobileEngine.exe. Only the MS IE 6 could load the standard SAP applet for digital signature.
Now my question is:
What is the difference between the standard SAP jar-file "mamsignapplet.jar" and the jar-file I have created by using the normal Eclipse export as jar functionality?
What's wrong with the jar-file I have created?

Hello,
The jars have to be "digitally signed". You can have a look here:
http://java.sun.com/developer/Books/javaprogramming/JAR/sign/signing.html
If it is still not wroking, I can find out with the production guys how they do it.
Thank you,
Julien.

I have trouble with APSDeamon.exe

I also have trouble with starting I Tunes. Can you send a programtool to solve this problem?

Hi Tonnie Blommaart,
If you are having issues with APSDaemon.exe and iTunes not launching, you may find the following article helpful:
Apple Support: iTunes for Windows and the iCloud Control Panel may not launch when APSDaemon (Apple Push) is running
http://support.apple.com/kb/TS4194
Regards,
- Brenden

BSOD with ntkrnlpa.exe

Similar Messages

Maybe you are looking for