BSP App call from ABAP report.

Hello,
I need to call /IRM/GCRM_WS BSP application through ABAP Report. Call trnasaction '/IRM/GCRM_WS' does work fine.
How can i call it for a particular document as we do it with set parameter before call transaction?
pls provide ideas.
Rgds.

Hi,
that depends on what you did with that transaction and how you call it. You don´t provide much information.
Perhaps you have to add parameters to the URL: your_url?param1=value1&param2=value2
Check first how that BSP is structured and what it expects as parameters.

Similar Messages

  • IP - Is it possible to call exit planning function from ABAP Report..

    Hi All,
    Greetings.
    Is it possible to call exit planning function from ABAP Report (t-code SE38) ? Or I mean is not limited only to be called from ABAP Report, perhaps from BSP / Web-Dynpro / Function Module.
    If somebody here has been doing it before, I'm keen to ask to kindly share it. Particularly how to call and transfer data to that exit function.
    Or if somebody has done in BPS, appreciate if it can be shared too .
    Thanks a lot and have a good day,
    Best regards,
    Daniel N.

    Hi.
    You can achive this as suggested by Mattias in your previous post.
    Lets say you have next data structure:
    CostCenter | Amount | PercentForDistibution |
    Create input ready query in this format. Restrict cost center by variable type range.
    Create WAD with analysis item.
    When you run web page you enter range of cost centers (lets say you will enter 101004 to 101010).
    I assume you have data only for 101004 in your cube (lets say 1000).
    You will see only one record in your webpage.
    CostCenter | Amount | PercentForDistibution |
    101004       | 1000     | NOTHING
    When you create WAD in analysis item properties set "NUMBER_OF_NEW_LINES" to lets say 1 (so in WAD you will see always one blank line for entering new data).
    Just add 6 new records:
    CostCenter | Amount   | PercentForDistibution |
    101005       | NOTHING| 10
    101006       | NOTHING| 30
    101007       | NOTHING| 20
    101008       | NOTHING| 25
    101009       | NOTHING| 5
    101010       | NOTHING| 10
    Then run planning FOX function like this:
    FOREACH Z_COST_CENTER.
    IF {Amount, Z_COST_CENTER} <> 0
    Z_AMNT_TO_DISTRIBUTE = {Amount, Z_COST_CENTER}.
    ENDIF.
    ENDFOR.
    FOREACH Z_COST_CENTER.
    IF {PercentForDistibution Z_COST_CENTER} <> 0.
    {Amount, Z_COST_CENTER} = Z_AMNT_TO_DISTRIBUTE * {PercentForDistibution Z_COST_CENTER}.
    ENDIF.
    ENDFOR.
    It is not perfect FOX, but as an idead, it should work.
    Regards.

  • CALL BSP from ABAP report

    I want to execute a BSP from ABAP report. The BSP is the standar CRM CASE MANAGEMENT BSP.
    I have a CRM CASE list in ABAP report and when I make double-click on one case i want to call BSP to show this case. I don't want to execute the GUI transaction CRMD_CASE. I need to execute the BSP.

    Hello Ivan,
    To call the BSP from the ABAP report following thread will be helpful for you.
    Call BSP from SE38 Program ?
    Regards
    Aashish Garg
    Message was edited by:
            aashish garg

  • How to call  an abap report in BSP..

    hi all,
    Please can anybody tell me how to call an abap report in BSP application.....since I am new to BSP....
    with regards,
    Santosh

    check this thread
    Urgent!!  How to call a custom transaction or an ABAP program in BSP?

  • Calling and manipulating data on an Interactive Adobe form from ABAP report

    Dear All,
    Can you please tell me how to call an interactive adobe from from a custom adobe form?
    If so how can we pass and receive data between the interactive adobe form and the abap report program?
    Thank you.
    Regards,
    Prosenjit.

    Hi,
    It is possible to call an Interactive Adobe form from ABAP report and pass data into the form. If you search the forum, you will get many threads explaining the process. Let me know if you have any specific questions on this.
    Regards,
    Sanoosh

  • Calling an ABAP Report from the Web

    Hello all,
    Is there a way in WAD to have a web link call an ABAP report?  I am trying to provide a link in my web template to allow users to launch the BEx Analyzer.  When I look at transaction RRMX in the GUI, it appears to be calling the ABAP report RRMX_START_EXCEL.  Can I use BSP to accomplish this?
    Thanks in advance for any help you can provide,
    Chris

    OK, here is the code for my BSP page:
    <%@page language="abap"%>
    <%@extension name="htmlb" prefix="htmlb"%>
    <html>
    <% submit RRMX_START_EXCEL and return. %>
    </html>
    When I attempt to test it, however, I am receiving the following error:
    The following error text was processed in the system BWS : Screen output without connection to user.
    The error occurred on the application server sapbwsci_BWS_35 and in the work process 5 .
    The termination type was: RABAX_STATE
    The ABAP call stack was:
    Module: SEND_TAB of program SAPLGRAP
    Function: GRAPH_RECEIVE of program SAPLGRAP
    Function: REGISTRY_GET of program SAPLGRAP
    Form: PREPARE_LAUNCHER of program SAPLRSAH
    Function: RSAH_LAUNCH_EXCEL of program SAPLRSAH
    Form: START_EXCEL of program RRMX_START_EXCEL
    START-OF-SELECTION of program RRMX_START_EXCEL
    Any ideas??
    Thanks again!!

  • Calling custom Infotype method from ABAP report

    Hi Experts,
    I am working on an application where i need to call a method of a custom defined infotype.
    I have done this -->
    1. Create a custom infotype 9111
    2. SAP creates a class of that infotype ZCL_HRPA_INFOTYPE_9111
    3. Inside this method there are few inherited method which provide me functionality of insert , update , delete
    i want to call methods IF_HRPA_INFTY_BL~MODIFY,
    IF_HRPA_INFTY_BL~INSERT
    However when i call these method from abap report this method does not work.
    where as when i try to insert an entry using PA30 transaction it works.
    Does anyone know why does this happen and what is the solution?
    Regards,
    Ashish Shah

    Hi,
    This is the code we are using. Just calling the read and modify methods of the check class. Very simple actually .. we just want once update/insert to work but it does not.
    <CODE>
    REPORT  ZTESTRAD_WD.
    FIELD-SYMBOLS <p9106> TYPE p9106.
    DATA : infty_container_tab TYPE hrpad_infty_container_tab ,
           message_list        TYPE REF TO cl_hrpa_message_list,
         w_ok type boole_d  ,
         ref_class TYPE REF TO ZCL_HRPA_INFOTYPE_9106,
         container        TYPE REF TO if_hrpa_infty_container,
         it9106_container TYPE REF TO cl_hrpa_infotype_container,
         p9106_ref        TYPE REF TO data,
        busilog type ref to if_hrpa_masterdata_bl.
    CREATE OBJECT  message_list.
    TRY.
            CREATE OBJECT ref_class
              EXPORTING
                tclas = 'A'
                infty = '9106'.
          CATCH cx_hrpa_violated_assertion .
            write :/ 'Error during initialization'.
      ENDTRY.
    call method cl_hrpa_masterdata_bl=>get_instance
       importing
         masterdata_bl = busilog.
    TRY.
    CALL METHOD ref_class->IF_HRPA_INFTY_BL~read
      EXPORTING
        tclas           = 'A'
        pernr           = 'XXXXXXXX'
        infty           = '9106'
        begda           = sy-datum
        endda           = sy-datum
        no_auth_check   = abap_true
        message_handler = message_list
      IMPORTING
        container_tab   = infty_container_tab
        is_ok           = w_ok.
    CATCH cx_hrpa_violated_assertion .
       WRITE :/ 'Infotype could not be read'.
    ENDTRY.
    *" Fill the local structure with container data:
      loop at infty_container_tab into container.
        it9106_container ?= container.
        TRY.
        CALL METHOD it9106_container->primary_record_ref
          IMPORTING
            pnnnn_ref =  p9106_ref.
         CATCH cx_hrpa_violated_assertion .
        ENDTRY.
        ASSIGN p9106_ref->* to <p9106>.
        write :/ <p9106> .
      endloop.
    *" Just change some field values of the record
      <p9106>-C1name2 = 'Test name'.
      <p9106>-C2name2 = 'Test name 2 3 4'.
    data : return TYPE BAPIRETURN1,
           return1 TYPE BAPIRETURN1.
    *CALL FUNCTION 'BAPI_EMPLOYEE_ENQUEUE'
    EXPORTING
       number        = <p9106>-pernr
    IMPORTING
      RETURN        = return1
    *PERFORM do_nothing(sapfp50p).
    The container itself is modified
      container ?= it9106_container->modify_primary_record( <p9106> ).
    CREATE OBJECT message_list.
    the invocation - errors are always fatal !!!
      DATA : lx_exception  TYPE REF TO cx_root,
             update_mode type HRPAD_UPDATE_MODE,
             massn type massn,
             massg type massg.
      TRY.
          CALL METHOD ref_class->IF_HRPA_INFTY_BL~MODIFY(
            EXPORTING
               old_container =                   it9106_container
               massn                          = massn
               massg                         = massg
               update_mode =                 update_mode
               no_auth_check =                   'X'
               message_handler =                 message_list
            IMPORTING
               is_ok =                           w_ok
            CHANGING
               container =                       container
        CATCH cx_hrpa_violated_assertion INTO lx_exception.
          RAISE EXCEPTION TYPE cx_wd_no_handler
            EXPORTING previous = lx_exception.
      ENDTRY.
    </CODE>
    I have also tried by instantiating the cl_hrpa_masterdata_bl and then calling the methods on that object...... makes no difference.
    I used this link to proceed with the modifications:
    http://help.sap.com/saphelp_erp2005/helpdata/en/43/21d2254bba2bebe10000000a1553f7/frameset.htm
    The funny thing is that the WHOLE logic executes without any error messages or dumps or anything. I have now debugged almost every line of code that these methods call. PA30 works just fine. HR_INFOTYPE_OPERATION does not .. that's a whole differnt story.

  • Calling a proxy from ABAP Report

    Hi All,
    Can any one gimme some idea about calling a XI proxy from ABAP Report.
    I need to gather data in my internal table and after that i need to trigger a proxy which is going to do a outbound processing.
    Thanks in advance.
    Tnx,
    Joe.

    Hi Meetjoe,
      We have to design the required interface in PI ,that is used to hold the report data when tigerred a proxy and generate the proxy based on the interface if the Proxy is based on the Outbound side its called client proxy  or if the proxy is genereated on Inbound interface we call it server proxy.
    need to gather data in my internal table and after that i need to trigger a proxy which is going to do a outbound processing.
      In your case its gonna be the client proxy refer the follwing links for your better understanding
    For concepts on Proxies:
    http://help.sap.com/saphelp_nw04/helpdata/en/02/265c3cf311070ae10000000a114084/content.htm
    To enable Proxy connections:
    https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/50d69314-1be0-2b10-11ab-8045021f0c3a
    Smaple scenarios on Proxy:
    Proxysettings /people/vijaya.kumari2/blog/2006/01/26/how-do-you-activate-abap-proxies
    ABAP Server Proxy /people/siva.maranani/blog/2005/04/03/abap-server-proxies 
    ABAP Client Proxy /people/ravikumar.allampallam/blog/2005/03/14/abap-proxies-in-xiclient-proxy 
    Thanks,
    Ram.

  • Calling an ABAP Report from ITS

    Hi,
    I am new to ITS and we have requirement, where i have to call an ABAP Report with selection screen.
    Now my question is where to put the code to execute the report and what is the syntax?
    Any suggestions/documentation would be of a great help.
    Regards,
    Lalith

    Hi Lalith,
    Just pass the Tcode after the webgate followed by ! mark.
    http://hostname:portno/scripts/wgate/<b>ztest!</b>
    Rgds,
    Jothi.P

  • How to create .csv file from ABAP report

    Hi
    We have a requirement to generate .csv file from abap report.
    Currently user saves data from abap report to spreadsheet(.xls format) in desktop.  Then opens excel file and save as .csv format.  Need option to save directly in .csv format instead of .xls format.
    Please let me know, if there is any standard function module available to create .csv file.
    Regards
    Uma

    I tried with your code it's going to dump
    REPORT ZTEMP101 message-id 00.
    tables: lfa1.
    types: begin of t_lfa1,
          lifnr like lfa1-lifnr,
          name1 like lfa1-name1,
          end of t_lfa1.
    data: i_lfa1 type standard table of t_lfa1,
          wa_lfa1 type t_lfa1.
    types truxs_t_text_data(4096) type c occurs 0.
    data: csv_converted_table type table of TRUXS_T_TEXT_DATA.
    select-options: s_lifnr for lfa1-lifnr.
    select lifnr name1 from lfa1 into table i_lfa1
           where lifnr in s_lifnr.
    CALL FUNCTION 'SAP_CONVERT_TO_CSV_FORMAT'
    EXPORTING
       I_FIELD_SEPERATOR          = ';'
             I_LINE_HEADER              =
             I_FILENAME                 =
             I_APPL_KEEP                = ' '
      TABLES
        I_TAB_SAP_DATA             = I_LFA1
    CHANGING
       I_TAB_CONVERTED_DATA       = csv_converted_table
    EXCEPTIONS
       CONVERSION_FAILED          = 1
       OTHERS                     = 2
    IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    CALL FUNCTION 'WS_DOWNLOAD'
    EXPORTING
      BIN_FILESIZE                  = ' '
      CODEPAGE                      = ' '
       FILENAME                      =
       'C:\Documents and Settings\ps12\Desktop\Test folder\exl.cvs'
      FILETYPE                      = 'DAT'
      MODE                          = ' '
      WK1_N_FORMAT                  = ' '
      WK1_N_SIZE                    = ' '
      WK1_T_FORMAT                  = ' '
      WK1_T_SIZE                    = ' '
      COL_SELECT                    = ' '
      COL_SELECTMASK                = ' '
      NO_AUTH_CHECK                 = ' '
    IMPORTING
      FILELENGTH                    =
      TABLES
        DATA_TAB                      = csv_converted_table
      FIELDNAMES                    =
    EXCEPTIONS
      FILE_OPEN_ERROR               = 1
      FILE_WRITE_ERROR              = 2
      INVALID_FILESIZE              = 3
      INVALID_TYPE                  = 4
      NO_BATCH                      = 5
      UNKNOWN_ERROR                 = 6
      INVALID_TABLE_WIDTH           = 7
      GUI_REFUSE_FILETRANSFER       = 8
      CUSTOMER_ERROR                = 9
      OTHERS                        = 10
    IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    my version is 4.6c

  • How can I print PDF attachments from ABAP report in transaction ME23N?

    Hi,
    Users attach PDF files using "services for objects" in transaction ME23N.
    How can I print the PDF attachments from ABAP report ?
    Thanks in advance,,

    Hi,
      check this link,this might help you to solve your problem
    /people/thomas.jung3/blog/2005/04/28/setting-up-an-adobe-writer-for-abap-output
    Regards
    Kiran Sure

  • Start BPM process from ABAP report. Need some investigations.

    Hi there!
    I have to start a BPM process from ABAP report. I found an article http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/10d75b45-7fef-2b10-bc8e-c6012e0a9457?QuickLink=index&overridelayout=true and have done everything it describes but the process doesn't start.
    What I've done:
    1) Created a service proxy in SE80.
    2) Created a logical port in SOAMANAGER.
    3) Write a code to start a WebService in ABAP Report.
    But when I start a program nothing happens, no errors.
    What analysis I did:
    1) See logs and traces in SOAMANAGER - there is nothing appears after I start the report.
    2) Tried to test connection to my WebService in SM59 - the connection works, but it use a POST method instead of GET:
      Error: com.sap.engine.services.webservices.espbase.server.additions.wsa.WSAddressingException: com.sap.SOA.wsr.030104 - Expected request method POST. Found GET.
    But I think it is OK and from the report it use a right method.
    3) Tried to delete a logical port - the error of communication problem appears. So it means that all settings are right.
    4) No logs in NWA logs
    My thoughts - if there is not any errors and no result, it can be because the user authorization. E.g. it tried to start a process by a user who doesn't have SAP_BPM_SuperAdmin role. But I can't find a way how to check what really happens. So I want to ask for a help, colleagues:).

    Dear Kirill Zhuklinets,
    Can you share your solution as i am facing the same error while trying to consume BPM webservice from SRM ECC
    Error Message from SRM ECC :
    Exception occurred in communication framework:Error in HTTP Framework:405Method Not Allowed
    Log from BPM Web service
    Error: process()
    [EXCEPTION]
    com.sap.engine.interfaces.webservices.runtime.RuntimeProcessException: com.sap.engine.services.webservices.espbase.server.additions.wsa.WSAddressingException: com.sap.SOA.wsr.030104 - Expected request method POST. Found GET.
    Please share your solution..
    Regards,
    Yasin

  • Bapi Function call from Crystal reports 2008. import parameters syntax.

    Dear,
    I have an issue with calling a function directly from Crystal reports (2008) in the R3 system.
    (if this belongs in another thread , please add the link if moved !)
    I try to get data through function "BAPI_CLASS_GET_CLASSIFICATIONS".
    Till now all possible input parameters have no data-result.
    I already read other threads stating that 'for example' the Language key needs to be provided in a single character. 'E' in stead of 'EN'.
    I also already created a Z-wrap-function that fills out all input parameters 'hardcoded'. This works.
    clearly there are som syntax changes in passing the values to R3 when called from Crystal Reports.
    Can someone state which syntax has to be followed for numeric fields, for datefields etc. (so when i make these dynamical, I know which syntax should be the outcome of the formula)
    in my function that doesn't work I use these selections:
    (this function is called in a standard report only calling this function)
    {BAPI_CLASS_GET_CLASSIFICATIONS_1.I_LANGU_ISO} = "E" and
    {BAPI_CLASS_GET_CLASSIFICATIONS_1.I_LANGU_INT} = "E" and
    {BAPI_CLASS_GET_CLASSIFICATIONS_1.T_CLASS_OBJECTS.OBJECT_TYPE} = "MARA" and
    {BAPI_CLASS_GET_CLASSIFICATIONS_1.T_CLASS_OBJECTS.OBJECT_KEY} = "000000000000000085" and
    {BAPI_CLASS_GET_CLASSIFICATIONS_1.I_CLASSNUM} = "DSWTEST" and
    {BAPI_CLASS_GET_CLASSIFICATIONS_1.I_CLASSTYPE} = "001" and
    {BAPI_CLASS_GET_CLASSIFICATIONS_1.I_KEY_DATE} = Date (2011, 08, 05)
    I already tried other languages or the 'EN' as input.
    (I would like to know how the date is passed exaclty to R3.)
    The function is of course RFC enabled.
    when I call the my Z-function with predefined inputparameters in R3 it does give the wanted result.
    FUNCTION ZBAPI_CLASS_GET_CLASSIFICATION.
    ""Local Interface:
    *"  TABLES
    *"      OBJECT_CLASSIFICATION STRUCTURE  BAPI_OBJECT_VALUES
    *"      CLASS_OBJECTS STRUCTURE  BAPI_CLASS_OBJECTS
    data ZOBJECT_CLASSIFICATION type TABLE OF BAPI_OBJECT_VALUES.
    data ZCLASS_OBJECTS  type TABLE OF BAPI_CLASS_OBJECTS WITH HEADER LINE.
    ZCLASS_OBJECTS-OBJECT_KEY = '000000000000000085'.
    ZCLASS_OBJECTS-OBJECT_TYPE = 'MARA'.
    Append ZCLASS_OBJECTS.
    CALL FUNCTION 'BAPI_CLASS_GET_CLASSIFICATIONS'
      EXPORTING
        CLASSTYPE                    = '001'
        CLASSNUM                     = 'DSWTEST'
    *   KEY_DATE                     = SY-DATUM
    *   LANGU_ISO                    =
    *   LANGU_INT                    =
    *   CHARACTS_OF_CLASS_ONLY       =
    * IMPORTING
    *   RETURN                       =
      TABLES
        OBJECT_CLASSIFICATION        = ZOBJECT_CLASSIFICATION
        CLASS_OBJECTS                = ZCLASS_OBJECTS
    OBJECT_CLASSIFICATION[] = ZOBJECT_CLASSIFICATION[].
    ENDFUNCTION.
    please advise.
    once again if this should be moved to another forum , add the link please!

    Dear,
    I just debugged my Z-function, after adding all input parameters as in the standard BAPI function.
    All parameters seems to be passed correctly except from the table parameters from
    CLASS_OBJECTS
    So all I_parameters are passed :
    {ZBAPI_CLASS_GET_CLASSIFICATION.I_LANGU_INT} = "EN" and
    {ZBAPI_CLASS_GET_CLASSIFICATION.I_LANGU_ISO} = "EN" and
    {ZBAPI_CLASS_GET_CLASSIFICATION.I_KEY_DATE} = Date (2011, 08, 05) and
    {ZBAPI_CLASS_GET_CLASSIFICATION.I_CLASSNUM} = "DSWTEST" and
    {ZBAPI_CLASS_GET_CLASSIFICATION.I_CLASSTYPE} = "001" and
    {ZBAPI_CLASS_GET_CLASSIFICATION.I_CHARACTS_OF_CLASS_ONLY.BAPIFLAG} = ""
    but the table parameters aren't coming through:
    {ZBAPI_CLASS_GET_CLASSIFICATION.T_CLASS_OBJECTS.OBJECT_TYPE} = "MARA" and
    {ZBAPI_CLASS_GET_CLASSIFICATION.T_CLASS_OBJECTS.OBJECT_KEY} = "000000000000000085" and
    these are 'blanco' in the function.
    also after the function is executed and all data is retrieved, when passing the data back to Crystal reports, once again, the table result isn't passed to Crystal Reports.
    please advise

  • Java calls from ABAP code in XI

    Java and ABAP gurus,
    Is it possible to make java call from ABAP. Is a sample out there I can take a look at.
    Please help.
    Thanks.

    Hi,
    YES, Very well it  is Possible,
    This will help you
    /people/bv.pillai/blog/2006/09/28/calling-mdm-java-api-application-executable-from-abap
    /people/vijayasarathy.raghunathan/blog/2005/12/28/java-editor-inside-abap
    /people/gregor.wolf3/blog/2004/08/26/setup-and-test-sap-java-connector-outbound-connection
    JCo Outbound( calling Java Function from ABAP )
    /people/gregor.wolf3/blog/2004/08/26/setup-and-test-sap-java-connector-outbound-connection
    Call Java Class and Methods from ABAP
    Regards
    Agasthuri Doss

  • How to call a sub screen from abap report

    Hellow friends,
    how to call sub screen 1001 prog name SAPLMGD1
    and main program SAPLMGMM screen 4000 of tcode MM02.
    i need to call the sub screen from abap report

    Hi Rajesh,
    You can use FM MATERIAL_MAINTAIN_DIALOGUE to go to subcreen MRP1 in MM02.
    Please check this sample code from other thread and enter 'MRP 1' for p_dytxt.
    REPORT zsritest.
    TABLES mara.
    DATA: lv_bilds LIKE t133a-bilds,
    ls_t130m LIKE t130m,
    ls_rmmg1 LIKE rmmg1,
    lwa_view TYPE mbildtab,
    lwa_auswg TYPE mgauswg,
    lt_views TYPE STANDARD TABLE OF mbildtab INITIAL SIZE 0,
    lt_auswg TYPE STANDARD TABLE OF mgauswg INITIAL SIZE 0.
    PARAMETERS: p_matnr LIKE mara-matnr,
    p_werks LIKE marc-werks,
    p_dytxt LIKE mbildtab-dytxt.
    SELECT SINGLE * FROM mara WHERE matnr EQ p_matnr.
    CHECK sy-subrc EQ 0.
    CALL FUNCTION 'T130M_SINGLE_READ'
    EXPORTING
    tcode = 'MM02'
    kzrfb = 'X'
    IMPORTING
    wt130m = ls_t130m
    EXCEPTIONS
    not_found = 1
    wrong_call = 2
    OTHERS = 3.
    CALL FUNCTION 'BILDSEQUENZ_IDENTIFY'
    EXPORTING
    branche = mara-mbrsh
    materialart = mara-mtart
    tcode_ref = ls_t130m-trref
    * KZRFB = ' '
    IMPORTING
    bildsequenz = lv_bilds
    * KZ_BILDS_CHANGED =
    EXCEPTIONS
    wrong_call = 1
    not_found = 2
    OTHERS = 3.
    CALL FUNCTION 'SELECTION_VIEWS_FIND'
    EXPORTING
    bildsequenz = lv_bilds
    pflegestatus = mara-pstat
    TABLES
    bildtab = lt_views[]
    EXCEPTIONS
    call_wrong = 1
    empty_selection = 2
    OTHERS = 3.
    ls_rmmg1-matnr = mara-matnr.
    ls_rmmg1-werks = p_werks.
    READ TABLE lt_views INTO lwa_view WITH KEY dytxt = p_dytxt.
    CHECK sy-subrc EQ 0.
    lwa_auswg-auswg = lwa_view-auswg.
    APPEND lwa_auswg TO lt_auswg.
    CALL FUNCTION 'MATERIAL_MAINTAIN_DIALOGUE'
    EXPORTING
    irmmg1 = ls_rmmg1
    * IRMMG1_REF = ' '
    KZ_EIN_DARK = 'X'
    t_tcode = 'MM02'
    * FLG_MATNR_RES = ' '
    p_pstat = mara-pstat
    * FLG_STAT_ALL = ' '
    * CALL_MODE2 = ' '
    * IMPORTING
    * MATERIAL_NO =
    * UPDATE_OK =
    TABLES
    iauswg = lt_auswg[]
    EXCEPTIONS
    no_authority = 1
    OTHERS = 2.
    IF sy-subrc <> 0.
    * MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    * WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    Regards,
    Ferry Lianto

Maybe you are looking for