BSP application access via internet

hi all,
has any one implemented Bsp application which is accessed via eportal on the internet ,
i have a application which works fine on the intranet , but it does not work when accessed via the internet .
What could be the reason?
REgards
sameer

to access your BSP from internet your app server from where BSP runs has to be exposed to internet (DMZ). you should talk to your system admin guys to set it up
Raja

Similar Messages

Web Dynpro application accessed via internet?

Hallo
We should develop one Application, but it should be accessed via internet. Our Personal System and Material System ist from SAP. Thus we want to did the GUI in Web Dynpro for Java.
I'm not sure if the WD runs on internet? And ist it ture that SAP only good for the intranet application? Have you any example to solve the problem such as authentication and autorisation for the service (using adaptive Web Service)?
Thanks a lot and
Nice regards
ping

WD Java Apps can be accessed outside Intranet for example companies expose their ESS/MSS applications(WD Java apps) on the internet for their employees and managers. However you need to check for browser compatitbilty depending on the Portal SP level you are using. WD Java many not be supported by all browsers and versions.
Hope this helps
Siva

Is it possible to have a VI "run when opened" when accessed via Internet Explorer?

I am trying to get a remote panel application to "run when opened" when is accessed via Internet explorer. I have multiple remote panel licenses on the server and the VI is Re-entrant. The application works well except for this issue. Having the VI "Run When Opened" via IE is very important to the user. As is, when IE opens, the user must click on the panel image once to get the VI's attention and then again on the start arrow to run the program. Is there any way around this or a way to simplify the process?
Thanks.
Solved!
Go to Solution.

This is actually the intended operation of remote front panels, however, we can simplify the operation to meet closer with what your customer wants. Basically, if you were to always have your program run in somewhat of an idle state, you can use the Application Control>>Property node for 'RemotePanel.ConnToClients' property to determine when a user is connected and run the proccess of the program as soon as a connection is detected. When no connection is detected you could have the program run in an idle state. The attached screenshot shows a general way to do this. Have a good evening!
-Bob
-Bob
Attachments:
idle state.JPG ‏45 KB

Access via internet

Hi,
Can I configure my time capsule as a file server and can I access over internet via PC?

You can setup the TC as a fire server.. although as I have posted many times this morning.. it is a bad idea.. the TC is unable to back itself up. It has a single disk so any failure is total failure.
And no, you cannot access it from a PC remotely in any way that is secure unless you are using a vpn router and have the TC installed behind it as bridged device. That is really the only way, as SMB file protocol is not available on the WAN of the TC, only AFP.

Survey access via internet without sap login

Hi!
I just created a survey using crm_survey_suite. How can I let our external customers (without sap login) answer the survey via internet? I'm currently working on CRM 4.0.
Thanks!
Steph

Hi steph,
You will have work with Basis team and create an anonymous login id and password for your survey link which canbe sent on mail.
Regards
Raj

BSP application accessing error throgh browser

Hi ,
I am new to BSP.I need simple help.During my BSP execution.Its asking Domain name in URL path.Actually my SAP system is installed on Local installation.Can execute BSP Applications on system which is installation based on Lcal system installation procedure.
How can i resolve this domain issue during BSP execution.If u solve thsi issue things will be easy.
Plz suggest necessary configuration reqiured in BSP execution using Domain.
Regards

Hi,
it doesn't matter if it is a local installation or not.
You need a fully qualified domain name, as stated and explained in this weblog:
<a href="/people/brian.mckellar/blog/2003/09/25/bsp-in-depth-fully-qualified-domain-names In-Depth: Fully Qualified Domain Names</a>
If the machine is not part of a domain, do the following:
choose a domain name for yourself (should not match an existing real one), use it to set the icm parameter, and add an entry to your hosts file which matches your machine's FQDN to its IP.
If you need further help, let us know.
Regards,
Max

Remote access via internet to another macbook

I would like to access my moms computer when she needs help sometimes via the internet. We both have Macbooks and high speed internet. Before I move away I can install whatever is necessary on her computer. Then if she has computer problems (as she often does) I can go onto her computer to sort it out. (Obviously, I will have to phone her to tell her to open up the computer). Is this a really involved thing that I am asking? I don't really know where to start. I have heard of remote desktop but after reviewing it, it sounds like it is much more than what I am looking for. Any info to point me in the right direction would be much appreciated.

So why is system prefs saying, "To log in to this computer remotely, type "ssh [email protected]" at a shell command prompt."
Is it just because it doesn't know its behind the router?
I have tried telling finder to connect to server; vnc://65.95.40.34 and it just times out.
I have also tried setting Chicken of the VNC to;
HOST: 65.95.40.34
Display: 0
Password: (password that I set for login on her computer)
This just times out eventually.
I have also tried terminal both ways:
"ssh [email protected]" and
"ssh [email protected]"
and it tells me "ssh: connect to host 65.95.40.34 port 22: Operation timed out"
It take a minute or two using any of these methods before it tells me that its timed out.
I have made sure that she has her computer opened up and turned on of course and the settings so it will wake if admin accesses remotely.
Any ideas as to why this wouldn't work?
Thanks for all the info.

Multiple Virtual Machines access via internet

Hi, I dont know exactly what I am looking for but basically I have deployed two testing servers and I want to create different VMs on that and provide it to developers working from their home. I dont know how to be specific on that but once the conversation starts I ll have a framework to work with. Can somebody point me where to look for such a deployment technologies or suggest a manual homework ?
Thanks.

Sorry, the internet was down .. Anyway to answer those questions -
1. They are going to be commandline.
2. They are going to tests python apps so I am going primarily with ubuntu-servers
3. There isn't going to be a lot of VMs, for now. 4-5 is okay.
4. I should be able to access them remotely vis ssh or/and web app access
And ability to create vms via web or some gui remotely would be nice if there is any ?!?

Network Camera Access Via Internet

I have a d-link network camara. I connect it to my FE04 router (1811). How do I setup to have my people access to this camera by having them to enter ip address in internet with userid and password?

dynamic dns:
http://www.cisco.com/en/US/docs/ios/12_4/ip_addr/configuration/guide/ht_ddns.html
As for the firewall, nobody can access your network because of nat. IOS also has firewall, but in most cases it is not necessary.
Hope this helps, please rate post if it does!

Remote access via internet

Have an Vitek DVR with several cameras and after correctly configuring port forwarding on the router and input the IP to the DVR, I am able to view the camera pictures without any problems on the MacBook Pro. However, being able to view the camera results from the IPHONE via remote access, through Safari, requires an APP. Having tried the VITEK DVRViewer app, and half a dozen other apps, I am unable to connect via the iphone. I contacted VITEK and was informed that they are aware of the problem, which they say is due from the IOS6 update, an updated app was submitted to Apple for approval, which would solve the issue.
I have found many hits on the YouTube with the same issues. Does anyone know of a solution, or if they were told by VITEK of the same solution?
Thank you

This would not seem to be an issue with Apple Remote Desktop, Apple's software for managing networked Macs and the topic of this forum. I'd suggest you take this up in the iPhone forum, where you'll be more likely to encounter someone attempting to run the same app and hence provide suggestions.
Regards.

Bonjour Access via Internet

Ladies and Gentlemen:
How do I setup a bonjour connection form may Laptop (on the road via 3G) to my HomeMac for screen-sharing?
Thank you very much.
Kind regards
Dieter Zakel

Is your Back to My Mac, not working (or otherwise not an option), Dieter?
[Mac OS X: Using and troubleshooting Back to My Mac|http://support.apple.com/kb/HT1109]

My Home IT Camera cannot be accessed via Internet

I have a Tenvis IT Camera on Port 81 connected to my BT Infinity Modem which works fine on WiFi at home but not over the Internet world wide, someone said that Port 81 may be blocked on my router. I have tried the PortForwarding Software to no avail. Can anyone help
Bob

This link should help.
Port forwarding problems
There are also some forum threads concerning this camera.
http://community.bt.com/t5/forums/searchpage/tab/message?filter=location&location=forum-board%3AOthe...
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

Using Time capsule via internet

if my time capsule is at home, can i have access via internet from my company?

Your company probably has various firewalls in place that would prevent this.
There are numerous articles on connecting to the Time Capsule on the Internet. For starters:
http://www.google.com/search?client=safari&rls=en&q=Connect+to+time+capsule+from +the+Internet&ie=UTF-8&oe=UTF-8

How to Use calendar service via internet not intranet

Hello:
I wanted to know if there is any change or stuff (like proxy web server) to use the calendar via Internet.
i.e.
i access the calendar on my networ througth http://hostname.domainname.com:portnumbre.
When i try to access via internet therougth www.domainname:portnumer, it cannot be accesible.
What are the procedures, by the way i have used the evaluation senario for this.
Thanks in advice.

Hi:
Thanks for the reply but still yet it does not fix my problem.
Let me explain a little bit more:
The DNS looks up to the ip so the access page can be reached, but when i try to use the service it does not work.
So i guess i need to ad some line to ics.conf?? or something else:
My domain internally just works fine.
host.mydomain.com:3080
and i access and use the clalendar
however when outside the intranet i.e my home i use:
www.mydomain.com:3080
It accesses to the page where it asks me for login, but it does not authenticate. and continues asking for a user.
That�s why i think there must be some change in the configuration or software.
Once More
Thanks

Deployment - Making BI Dashboard accessible via internet

Hi Guys,
Would anyone be able to point me to an article/blog/ Oracle Manual that deals with enabling OBISE Presentation Services (Interactive Dashboard) being accessed via internet?
Currently I have it set up in a local machine and access it via Remote Desktop. I need it accessible via web on url like https://dashboard.mywebsite.com/ or something like that.
I know for starters I need a subdomain set up, but wondering if there is instructions anywhere that deals with this kind of deployment.
Cheers,
AI
Edited by: AI on Oct 19, 2011 3:03 PM

Hi
Authorization & access wise both are similar. You can give data level authorization with authorization object.
Look & feel wise VC is good. Also the 'Flash' functionality which is available in VC is not there in WAD. Drilldown with Flash is better if you are looking at user point of view.
Regards
Sandeep

BSP application access via internet

Similar Messages

Maybe you are looking for