BSP data from different user mixed up

Hello,
Our stateful BSP application is called from the portal. How can it be possible that two different users at two different locations with different session id's can see information from the other person?
Best regards
Sander

Hi Sander,
this can happen if you enable server cache. One user calls the page with his relevant information, then the page is cached and each other user who calls the same page gets the cached one instead of his own page.
Please have a look at the "Properties" tab of your page and check that the Cache is set to 0 sec.
Regards,
Rainer

Similar Messages

View hard disk data from different user login

I have Macbook pro. Took a back with a new user login, but apple ID is same. How to view the data.

The only way to view the data in another home folder is to login as that user, or log in as root.
Follow the directions at this page to login as root. https://support.apple.com/kb/ht1528

How to store jsp session data of different user in util.hashmap

how to store jsp session data of different user in java.util.hashmap
and access the data of all user on the server side
The same example is given in professional jsp but its not working.
I can use getIds() of httpsessioncontext but it's depricated

Hi
I'm trying to make an example.
With the following codes you can get the date from the session.
request.getSession().getAttribute("sessionname")
To store it in a hashmap you could do it like this ->
Hashmap hm = new Hashmap();
hm.put(Object key, request.getSession().getAttribute("sessionname"));
I hope you understand it if not just write it!
Cyrill

How to get data from different SEGMENTs

Hi;
My requirement is to first of all retrieve the data from different segments in run time.
I mean, i have to execute t/code WE19 and the idoc will be given after that an user exit would called where i have to retrieve the data from different segments and then it would store in an internal table for further calculation.
Can you all please guide me how to retrieve the data via ABAP code in runtime so that it can store in an internal table.
Regards
Shashi

write code lke this ..
form post_idoc tables idoc_data structure edidd
                                idoc_status structure bdidocstat .
loop at idoc_data .
case idoc_data-segnam .
    when 'zsegment1'.
       move idoc_data-sdata to wa_zsegment1 .
    when 'zsegment2'.
      move idoc_data-sdata to wa_zsegment2 .
   when 'zsegmentn'.
      move idoc_data-sdata to wa_zsegmentn.
endcase .
endloop.
After this write code to move data to int table from work area .
endform .
Hope this helps u....

Import data from different Excel sheets to different tables

I have an Excel file which has different sheets(S1,S2,S3) .The columns in the sheet are different. I want to import the data from different sheets to different tables(T1,T2,T3).
S1 ---> T1
S2 ---> T2
S3 ---> T3
I want only one Excel data source in my SSIS package.

You need to have different DFT flows for that as the metadata is different. You need to map each sheets to corresponding destination tables and then it would work fine
Please Mark This As Answer if it solved your issue
Please Vote This As Helpful if it helps to solve your issue
Visakh
My Wiki User Page
My MSDN Page
My Personal Blog
My Facebook Page

Copying a query from different user group

masters,
is it possible to copy a query from different user group?
if so please tell me how
thnks!

The query made from SQVI is only intended for individual use. It cannot be transported and there is no concept of Global/Standard area. To be able to transport or share the query to other users is by converting it to SAP Query wherein the source of data will also be converted to an Infoset. Remember that is done in the Standard query area. To do this, go to SQVI-> click SAP Query then go to menu Query -> Convert Quickviews... Select your Quickview queries and provide and infoset name.

How to "join" data from different SyncBO's within MAM?

Hi,
Have anyone tried "joining" the data from different SyncBO's into one in a custom MAM application? For example, the SyncBO MAM30_30 (Functional Location) has references to MAM30_016 (Catalog + Code Groups). Is there an easy way to display all of the related information together, instead of first looping through objects from MAM30_030, then for each individual object, loop through a list of MAM30_016?
Basically, the application that we're working with has 3000+ Functional Locations, so we are looking for a way to join the data and display them as one object to improve performance.
Many thanks!
Jeffrey

Thanks Norbert. Unfortunately, we cannot create new Syncbo's, as we have limited access to that R/3 backend.
Basically, what we want to do is customize the MAM bit so that it can display the Tech Obj List with all its codes and children item syncbo's, instead of having the user click on the link to see more info. We would like to do this without having to loop through the child sync bo's.
Many thanks!

Help needed to insert data from different database

Hi ,
I have a requirement where i need to fetch data from different database through database link .Depending on user request , the dblink needs to change and data from respective table from mentioned datbase has to be fetched and populated .Could i use execute immediate for this, would dblink work within execute immediate .If not , could pls let me know any other approach .

What does "the dblink needs to change" mean?
Are you trying to dynamically create database links at run-time? Or to point a query at one of a set of pre-established database links at run-time?
Are you sure that you really need to get the data from the remote database in real time? Could you use materialized views/ Streams/ etc to move the data from the remote databases to the local database? That tends to be far more robust.
Justin

InfoCube Modelling-Adding data from different ODS's on to the Infocube

Hi Experts,
I am new to SAP BI. I have a basic doubt on Modelling the InfoCube.
In our requirement, I have to populate data from 9 custom SAP Tables on to 9 ODS's. And, then take these data on to Infocubes.
And, they want to reduce the number of cubes as much as possible. So, I have to combine the data from different ODS's and build 2-3 Infocubes.
For Example.
I am going to combine 5 ODS's data on to 1 CUBE based on Delivery number...
there are 5 ODS with common key Delivery number. And, suppose I have added some set of fields from ODS1.
And, now when I add other set of fields from the second ODS, WHAT WILL HAPPEN TO THE 'Delivery Number' field ??
I will make it clear.
I have a record in CUBE already containing Fields- : Delivery no, field_a, field_b, field_c, field_d. Where the 'Delivery no =112333'. This record comes from ODS1.
Now, I want to add data data from ODS2, containg fields -: Delivery no, field_e, field_f, field_g, field_h.
And, what happens to the already existing record in CUBE with 'Delivery no = 11233'. ?
Will the value in this info-object get overwritten ?
OR.. will it combine the data from both the ODS's and show it as ONE record ???
Please advice ... How will I solve this scenario ?
Thanking You in Advance
Shyne Sasimohanan

Answer for your question and the suggestion.
the data will look like as given below
Delivery no, field_a, field_b, field_c, field_d, field_e, field_f, field_g, field_h
11233           1           1           1          1            0           0            0            0
11233          0           0          0             0           1           1           1          1
but the best way, according the design standards is creating another DSO on the top of all the DSO's and combine all the data in that DSO and send the data to Infocube. then the data will be shown as below.
Delivery no, field_a, field_b, field_c, field_d, field_e, field_f, field_g, field_h
11233           1           1           1          1            1           1           1          1
Regards,
Siva A

How to combine data from different input forms outside a nested iView

Hi,
i try to combine data from different input forms in a single one.
Because of space reasons in Flex compiling i already use nested iViews. Within these nested iViews its possible to use the 'combine' function to do this.
But in the main iView I cant compose these function with other elements. I need to do this because of using these model in Guided Procedures with output parameters. These parameters I only get with a 'endPoint'. Unfortunatly its not possible to combine data from different input forms into the 'endPoint'.
Is there any solution?
Thanx
Mathias

Hi Scott,
i tried this already and i also tried to map all parameters in the endpoint by drawing lines from the other forms and assign the 'empty parameters' by a formula.
And when i create a collable object in GP and assign the VC iView, only the parameters of the parent-form (the form who trigger the event) are shown as output-parameters.
Maybe any other ideas? I cant believe that such a simple thing is not possible?!?!
In my opinion, thats a bug, that I'am not able to use the combine-operator in the main VC-iView. Whats your mind?
greets
mathias

Data from different databases in the same report.

Hi Everyone,
I am trying to build a reconciliation report in which I need to show the data from the source and target, side by side.
Source and target are both different databases, although being oracle only
Whenever a new data model is created, it gets attached to a data source and in the report we need to choose a specific data model.
Can we have data from different databases in the same report ?

Yes, it is possible.
One way Is to use dataTemplates. There you can make queries from any number of different databases (The max I have done is 5).
It looks something like that:
<dataTemplate name="NameOfTemplate">
<dataQuery>
     <sqlStatement name="Q1" dataSourceRef="Connection1">
          <![CDATA[     select * from table1]]>
     </sqlStatement>
     <sqlStatement name="Q2" dataSourceRef="Connection2">
          <![CDATA[     select * from table2]]>
     </sqlStatement>
</dataQuery>
<dataStructure>
     <group name="RESULT1" source="Q1">
          <element name="P_FIRST_NAME" value="P_FIRST_NAME"/>
     </group>
     <group name="RESULT2" source="Q2">
          <element name="P_DATE" value="P_DATE"/>
     </group>
</dataStructure>
</dataTemplate>dataStructure is very important when you get data from different places, if you don't define those elements, then only the result from Q1 is shown.
The second possible way is to make as two different data models, each containing their own query and then set Main Data Set as concatenated SQL Data Source.
Best of luck,
Evelyn

How to display multiple data from different table in one table? please help

Hi
I got sun java studio creator 2(the separate installation not the one in the net beans)....
My question is about displaying data that have been taken from the database.... I know how to display data in a table(just click on the table "bind data" )... but my question is that:
when i want to use a sql statement that taken the data from different table...
how can i display that data in the table(that will be shown in the web) ??? when i click bind data on the table i can only select one table i can't select more than one....
Note:
1) i'm using the rowset for displaying the data in the table, since the sql statement is depending on a condition(i.e. select a from b where c= ? )...
2) i mean by different table is that( i.e. select a from table1,table2 )..
thanks in advance...

Hi,
937440 wrote:
Hi every one, this is my first post in this portal. Welcome to the forum!
Be sure to read the forum FAQ {message:id=9360002}
I want display the details of emp table.. for that I am using this SQL statement.
select * from emp where mgr=nvl(:mgr,mgr);
when I give the input as 7698 it is displaying the corresponding records... and also when I won't give any input then it is displaying all the records except the mgr with null values.
1)I want to display all the records when I won't give any input including nulls
2)I want to display all the records who's mgr is null
Is there any way to incorporate to include all these in a single query..It's a little unclear what you're asking.
The following query always includes rows where mgr is NULL, and when the bind variable :mgr is NULL, it displays all rows:
SELECT *
FROM     emp
WHERE     LNNVL (mgr != :mgr)
;That is, when :mgr = 7698, it displays 6 rows, and when :mgr is NULL it displays 14 rows (assuming you're using the Oracle-supplied scott.emp table).
The following query includes rows where mgr is NULL only when the bind variable :mgr is NULL, in which case it displays all rows:
SELECT     *
FROM     emp
WHERE     :mgr     = mgr
OR      :mgr      IS NULL
;When :mgr = 7698, this displays 5 rows, and when :mgr is NULL it displays 14 rows.
The following query includes rows where mgr is NULL only when the bind variab;e :mgr is NULL, in which case it displays only the rows where mgr is NULL. That is, it treats NULL as a value:
SELECT     *
FROM     emp
WHERE     DECODE ( mgr
            , :mgr, 'OK'
            )     = 'OK'
;When :mgr = 7698, this displays 5 rows, and when :mgr is NULL, it displays 1 row.

How to insert data from different internal table into a data base table

hi all,
I want to insert a particular field in an internal table to a field in a data base table.Note that the fields in the internal table and database table are not of the same name since i need to insert data from different internal tables.can some one tell me how to do this?
in short i want to do something like the foll:
INSERT INTO ZMIS_CODES-CODE VALUE '1'.
*INSERT INTO ZMIS_CODES-COL1 VALUE DATA_MTD-AUFNR .(zmis_codes is the db table and data_mtd is the int.table)

REPORT ZINSERT.
tables kna1.
data: itab LIKE KNA1.
data lv_kUNAG LIKE KNA1-KUNNR.
lv_kuNAG = '0000010223'.
ITAB-kuNNR = lv_kuNAG.
ITAB-name1 = 'XYZ'.
INSERT INTO KNA1 VALUES ITAB.
IF SY-SUBRC = 0.
WRITE:/ 'SUCCESS'.
ELSE.
WRITE:/ 'FAILED'.
ENDIF.
Here lv_kunag is ref to kna1 kunnr passed in different name
In internal table .
Try and let me know if this logic dint work.

Best way to accept a date from a user

Hi Guys,
Whats the best way to get a date from a user and add it in an
insert record to access.
I have a form that adds a record and it works well enough as
long as the data added is in the correct format.
Untill now ive just had a text box with an explination to the
user on how to add the date and what format....
But Im fed up with having to change bad entrys and need to
place a control or something on the form but dont know whats
easiest and best?
Any ideas welcome.
Thanks

If you want today's date set the database up to insert the
date
automatically. If you want other dates than today's use a
date picker or
calendar to insert the date.
Dave
"Tag2007" <[email protected]> wrote in
message
news:epj87p$mar$[email protected]..
> Hi Guys,
>
> Whats the best way to get a date from a user and add it
in an insert
record to
> access.
>
> I have a form that adds a record and it works well
enough as long as the
data
> added is in the correct format.
>
> Untill now ive just had a text box with an explination
to the user on how
to
> add the date and what format....
>
> But Im fed up with having to change bad entrys and need
to place a
control or
> something on the form but dont know whats easiest and
best?
>
> Any ideas welcome.
> Thanks
>

Select data from different database

hi,
may I know how to select data from different database?
for example,
I've 2 databases, OracleDB and OracleAR
Connect with OracleAR in SQL*Plus
select * from OracleDB.TableName
does Oracle support this kind of query?
how can I retrieve data from other database while im connecting with
other database?

Hi,
Yes, it's possible. No, your syntax won't work.
First of all you have to define a DATABASE LINK inside the DB where you are already connected (in this case OracleAR). Read docs how to do that.
Second thing is the query. It will look like
SELECT * from TableName@<NameOfDatabaseLink>Greetings,
Guido

BSP data from different user mixed up

Similar Messages

Maybe you are looking for