BSP does not show up after installation of service pack 9 on BW 7.0

Hi,
We are working on netweaver 2004s.
We have a very simple BSP page, which has been developed in BW box. Its just used to load flat files to the application server.
It was working well when we were at service pack 8. Recently we have installed service pack 9 and this BSP page either through portal or directly in web-browser does not show up at all i.e all we see is a blank page and the status bar of the browser keeps running forever.
Could you please advise what has gone wrong and is there a fix to this.
Note: other 2 BSP pages in the same BW system are working fine.
kind regards,
Waseem.

Hi Raja,
Thanks for your prompt reply.
I activated the BSP page and re-tested but it does not work.
When I activate in SE80, I get the message 'Active object generated'.
When I run it through portal or web-browser ... it does not show any message but the status bar of the browser keeps moving .... forever, indicating its doing something.
There are other 2 BSP pages which are working fine, but this BSP page ( which is the most important) is giving this porblem.
kind regards,
Waseem.

Similar Messages

  • Conversation Translator does not show up after installation

    Hi,
    I installed the Conversation Translator for Lync 2010 from conversationtranslator.com. The installation was successful but the add-on does not show up. I used it before on a different network and it was working fine. I don't know what to check to figure
    out why its not working this time. Note: I am connecting to our network through VMware (VDI). The colleague of mine who is connecting directly managed to install and is able to use.
    Could you please help?

    Hi Raja,
    Thanks for your prompt reply.
    I activated the BSP page and re-tested but it does not work.
    When I activate in SE80, I get the message 'Active object generated'.
    When I run it through portal or web-browser ... it does not show any message but the status bar of the browser keeps moving .... forever, indicating its doing something.
    There are other 2 BSP pages which are working fine, but this BSP page ( which is the most important) is giving this porblem.
    kind regards,
    Waseem.

  • TS1424 Apple Mobile device does not show up after installing 10.0.7.21

    Receive message "Apple Device not started". Apple Device does not show up in Adminstrative Tools, Services. Windows 7 64bit, IOS6.0.1.

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    The section Install missing components has advice on breaking down the iTunes installer into the individual .msi files which might prove useful if a component such as Apple Mobile Device Support won't install normally.
    tt2

  • I am trying to update a chart in Pages that I created in Numbers, but the refresh button does not show up after I save the Numbers file. Thoughts?

    I am trying to update a chart in Pages that I created in Numbers, but the refresh button does not show up after I save the Numbers file. Thoughts?

    It is hard to exactly understand what you have  done or not by you one sentence description. My thought is have you read in the Pages User Guide? Here is what it says about updating a chart in Pages:
    Updating a Chart Copied from a Numbers Document
    If you’ve created a chart in Numbers, you can copy it and paste it into your Pages document. After it’s been pasted into Pages, the chart remains linked to the data tables it references in Numbers. To change the chart data, open the original Numbers document and edit the data there, save the Numbers document, and then refresh the chart data in Pages.To update a chart after you’ve updated its linked Numbers table:
       Select the chart on the page and click the Refresh button that appears.
    Note: You must save the Numbers document before copying and pasting your chart into your Pages document and after editing the Numbers data tables that the chart references.
    I hope it has helped you.

  • LR5 - Watermark does not show up after exporting...??

    Does not show up after exporting...?? Any ideas???

    ccherrry wrote:
    Any ideas???
    Yeah, provide some details.
    Version 5.0 or 5.2RC?
    Mac? PC?
    Simple Watermark?
    Watermark Editor Created? Text-based? Graphic-Based
    Export format?

  • What causes iphone 3gs every time I insert the SIM card does not show the screen or no service?

    what causes iphone 3gs every time I insert the SIM card does not show the screen or no service?

    If the iPhone was unlocked unofficially, it has been locked to original carrier again.

  • Ibook g3 hard drive does not show up after new installation

    I have an older ibook g3. I purchased a 20gb hard drive to replace the dead 10gb hard drive that came with the computer when I bought it new. The installation was fairly easy. After the hard drive was installed and everything was put back together I turned on the computer and loaded the install disk into the cd tray. The new hard drive does not show up in order to install the operating system. What do I need to do in order to get the hard drive to show up?
    Scott

    Hey Scott,
    The new hard drive does not show up in order to install the operating system. What do I need to do in order to get the hard drive to show up?
    When you're in the installer go up to the top menu bar under utilities? or tools? and start up disk utilities. See if you see the hard drive there. If so it might not be formatted correctly so erase it and format it for your install (usually Mac OS Extended (Journaled). That should make it show up.
    Richard

  • Background for site does not show up after uploading to webhost...

    My background for my website does not show up on my webhost after uploading site with Dreamweaver.
    Here is my site: http://legacyofys.comxa.com/
    Here is the backgroud image: http://point-file-manager.000webhost.com/index.php?ftpserver=legacyofys.comxa.com&ftpserve rport=21&username=a2022293&language=en&skin=blue&ftpmode=automatic&passivemode=no&sslconne ct=no&viewmode=list&sort=&sortorder=&state=view&state2=image&directory=%2Fpublic_html%2Fim ages&entry=Background.png
    I know the background image successfully uploaded to my webhost, because it shows up in my file manager. What is wrong here? How do I fix this?

    So it was a path issue  :-)  Glad you sorted it .
    Nadia
    Adobe® Community Expert : Dreamweaver
    Unique CSS Templates |Tutorials |SEO Articles
    http://www.DreamweaverResources.com
    Book: Ultimate CSS Reference
    http://www.sitepoint.com/launch/005dfd4/3/133
    http://twitter.com/nadiap

  • The new value of bind variable does not show up after changed by PL/SQL

    Hi,
    I am running APEX 3.2. I use PL/SQL process to assign a new value to a bind variable, say, :P2_TEST := 123. The new value does not show up on the page although I can see it in the Session status.
    How can I make the new value to be displayed on the page immediately after the process is run?
    Kind regards,
    Tee

    Maybe you could use an ajax routine to refresh the item in your pl/sql routine?
    Thank you,
    Tony Miller
    Webster, TX

  • SXMB_MONI does not show payload after upgrade to SP15

    Hi there,
    We have installed SP15 in our system, everything seems to be working OK with exception of the SXMB_MONI which now does not show the Payload in the SOAP output/response.
    Does anyone know if this is a know bug/functionality of SP15?
    Thanks,
    Roberto

    The other OSS note:
    SAP Note Number: 917885
    XI: Attachments werden im Message-Monitoring nicht angezeigt
    Version: 1, Note Language: EN, Released on: 01/27/2006 
    Symptom
    An XML message contains attachments with mime types different from application/xml. When clicking on the attachments in Message-Monitoring for that message, the attachments cannot be displayed!
    Error message is: "Format of the document cannot be displayed"
    Other terms
    SXI_MONITOR, SXMB_MONI, Runtime Workbench, XI, RWB, Message Display Tool, MDT
    Reason and Prerequisites
    Before displaying an attachment, Message Monitoring checks the mime type of the message with a list of supported types. Since there are several mime types for some applications, like powerpoint or excel, the check is not exhaustive.
    Solution
    The attached correction instruction adds additional mimetypes for powerpoint, excel, and word. The patch is included in SP17 for NW04 and SP7 for NW04s.
    Actually both of these notes don't exactly indicate that the issue will be fixed in terms of the payload.  We are going to apply it and see if it fixes the issue.  I will update this forum when i try it out.
    Regards,
    Jay

  • Exporting RAW to JPG Does Not Show JPG After Export

    When I export a RAW file that I want to be changed to JPG, the file does not show up in my Lightroom folder until I synchronize the folder that I exported to.  What LR setting is needed so that the exported JPG file will show automatically?

    In the Export Location area of the export dialog is a checkbox for Add to this Catalog if you have a newer version of LR.

  • Form does not show up after been put in portal page

    I have created form application and tested it in 9iAS but when I put it in Portal page, It does not show up in the Portal page. The report that I created under the same Application does show up. However, it does not show the form. I have check the Access and everything looks right. (I even grant it to the public and still does not work).
    Any help would be appreciated.

    <BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by chetan.kashyap ([email protected]):
    Johnny,
    This looks strange. We haven't encountered such problem. Could you pls give us more details. Like:
    Are you using "Inherit Privilege from Application" ?
    Are you using Tab page/ Normal Page.
    If tab pages, have you set tab level security?
    Are you able to run that particular form from application? (Pls check it has a Valid production version).
    Are both forms & reports in the same application?
    Is this problem occuring for only a particular form or for all the forms?
    If you could provide the STEPS that you did..
    Thanx,
    Chetan.<HR></BLOCKQUOTE>
    Chetan and Johnny,
    I have the same problem as Johnny. Chetan, in answer to your questions:
    1. Yes, I am using "Inherit Privilege from Application"
    2. I tried it both on a page and on a tab and checked security, following the directions in "Building Portals, Release 3.0.8" Using "Portal30" login, access "Manage" etc.
    3. Yes, the form runs in Application, but not as a portlet on a portal page. We are using the standard demo configuration, Oracle 8i (enterprise ed.) and Oracle9i Application Server (minimal ed.).
    4. Yes, valid production version.
    5. I tried running reports and forms from same application and from different applications. Still does not show up on portal page.
    6. It occurs for all forms.
    7. Steps: As I indicated, I followed the directions closely in "Building Portals" which builds "Form based on table or view", "Publish to Portal" I even tried the database sequence (see page 4-27) and added that to the form configuration. I'm running it on NT 4.0 (service pack 5). The software was downloaded from the Oracle site.
    null

  • ESS tab does not show up after deploying ESS

    We did every configuration step for ESS and we had no issue before for other projects.
    However this time ESS tab does not show up on EP even the roles are assigned.
    ALL Jco tested OK.
    What could be wrong?
    Thanks for your help.

    Jose:
    Thanks!
    I think I miss
    BP_ERP5ESS
    BP_ERP5MSS
    Because I am at ecc6 enhp4, the matrix at Wiki did not specify above BP version.
    Could you tell me what version of
    BP_ERP5ESS
    BP_ERP5MSS
    should be applied to the EP7.01?
    Follow up:
    Jose: I do see the BP at the same Wiki:
    BP ERP05 ESS 1.41 SP04
    BP ERP05 MSS 1.41 SP04
    BP ERP05 COMMON PARTS 1.41 SP04
    I am going to apply them on the portal. Do you agree? Thanks again.
    Thanks!

  • The hit counter button does not show up after publishing page.

    I insert the hit counter button to a new blog post and when I publish, the button does not show up.
    I would really like to use the counter as this is a blog for a class I am teaching, and I would like to track
    student viewing.
    Also, sometimes the colors do not publish properly, specifically with links/rollover feature.
    Help!
    And thanks in advance for all you who know wayyy more than I do!  I hope to return
    the favor someday.

    First, thanks for the quick response Roddy.
    Once I posted the question, similar topics came up and what
    I did was remove the hit counter, publish the page without the hit counter. 
    Then inserted the hit counter again and wah-lah!
    Thanks for your reply, this information is correct and helpful as well.
    Very appreciative!

  • Mail application does not import messages after installation of yosemite 10.10

    after installing yosemite 10.10 mail does not start up but gives a message that the mail index is damaged. how do i get it to import my messages and star up again.

    Hello CMK1950,
    The article linked below details a number of steps that can help get your Mac to successfully boot up.
    Mac OS X: Gray screen appears during startup
    http://support.apple.com/en-us/TS2570
    Cheers,
    Allen

Maybe you are looking for

  • My ipod touch is no longer syncing with itunes

    not used the ipod for a while and wanted to update it last night. i changed the manual drag to tick as wanted all the recents downloads on the ipod. took nearly 3 hours for 270 songs to transfer. when finished i went to play a song but it had not tra

  • Inability to open a .pdf file in a browser.

    For years, I have run Acrobat 6 standard.  My wife & I share the same desktop--she uses IE for her browser; I use Firefox.  Early this year we both began getting the following error message when trying to open a .pdf file from within our resepctive b

  • I can not restart my IPad 2. The spinning ring does not stop at all.

    Hi All, I tried to switch off 2 hours ago for the first time. ( I bought the IPad2 last sunday) Unfortunately the spinning ring hasn't been stopped for 2 hours now. ITunes does not recognise the IPad 2 and displays an error message: iTunes could not

  • Hard Drive replacement nightmare

    On a G4 466 system with a 30gb primary hard drive running OSX 10.3.9, I attempted to perform a CCC disk copy to replace the startup disk. The drive I used as new was an IBM Deskstar 60GXP (40gb, ATA100, 7200rpm) that I previously used as a backup for

  • HT201068 Should I update this if I do not use Remote Desktop?

    I do not use Apple Remote Desktop and honestly do not even know what it is. I constantly get updates for it. Should I update it if I do not even use it? This one said that it includes improvements for Yosemite. I do not use Yosemite but MIGHT in the