BSP Error:Message E BL 203 cannot be processed in plugin mode HTTPs

Hi Experts ,
I am trying to navigate from one application to another by clicking on the opportunity that i have created.
While navigating i am getting the following error but this error does not occur for all the users.
The following error text was processed in the system:
Message E BL 203 cannot be processed in plugin mode HTTPs
Exception Class CX_SY_MESSAGE_IN_PLUGIN_MODE
Error Name
Program CL_CRM_BSP_FRAME_MAIN=========CP
Include CL_CRM_BSP_FRAME_MAIN=========CM001
ABAP Class CL_CRM_BSP_FRAME_MAIN
Method DO_REQUEST
Line 1003
Could you please help me in this regard.
Regards
D.Vadivukkarasi

You can use T_code SICF to active bc-->bsp and some components if you feel it is relevant.

Similar Messages

Error: Message E RSDODSO 201 cannot be processed in plugin mode HTTP

Hi all,
We have developed a BSP page in which, on button click, the onInputProcessing has a code written where 'Performs' in ABAP programs are being called.
When i execute the page, the layout gets executed fine. But on clicking the button after entering text, the following error is thrown:
Message E RSDODSO 201 cannot be processed in plugin mode HTTP
Exception Class CX_SY_MESSAGE_IN_PLUGIN_MODE
Error Name
Program CL_RSD_DTA====================CP
Include CL_RSD_DTA====================CM01P
ABAP Class CL_RSD_DTA
Method FACTORY
Line 45
Long text -
Please provide your suggestions to resolve the error.
Thanks,
Abhishek.

Hi Karthik,
This error occurs if you are calling external ABAP Perform or program, and the program is trying to raise any message.
Please debug your BSP application to find out exactly where this message is being raised.
Hope this helps.
Thanks,
Abhishek.

Message E R7 005 cannot be processed in plugin mode HTTP

Hi All,
I test my BSP page with transaction : BPS_WB u2013 Customizing Web Interface Builder.
I press u2018display previewu2019 to check layout and it displays well.
If i have not change any data, it can save.
But i has error when i change or input date and save it.
The error message is "Message E R7 005 cannot be processed in plugin mode HTTP ".
Does anyone have any idea about tracing/debug bsp page?
BR.
Wu

Hi Tanguy,
I have actived the InfoProvider of my InfoArea,but it still has an error messge like before.
After i trace the function, i find it is a sap program error(Note 1244874 - Inherited Error in RSDRI_CUBE_WRITE_PACKAGE).
I will import SAP_BW SP20 and test the function again.
Thanks for your advices.
BR.
Wu

Message E FPRUNX 001 cannot be processed in plugin mode HTTP

Hi,
I am getting an error when i execute BSP application error is as follows.
Exception Class     CX_SY_MESSAGE_IN_PLUGIN_MODE
Error Name
Program     Z_GET_BOOKING_FORM_NET========CP
Include     Z_GET_BOOKING_FORM_NET========CM001
ABAP Class     Z_GET_BOOKING_FORM_NET
Method     DO_REQUEST
Line     74
Long text     -*
coding in the method is as follows
method DO_REQUEST.
*CALL METHOD SUPER->DO_REQUEST
runtime->server->response->delete_header_field( name = 'Expires' ).
runtime->server->response->delete_header_field( name = 'Pragma' ).
DATA: l_name TYPE funcname.
TRY.
      CALL FUNCTION 'FP_FUNCTION_MODULE_NAME'
        EXPORTING
          i_name     = 'Z_CUST_FLIGHT_BOOKING_GEBO'
        IMPORTING
          e_funcname = l_name
        EXCEPTIONS
          OTHERS     = 0.
    CATCH cx_fp_api_repository.                         "#EC NO_HANDLER
    CATCH cx_fp_api_usage.                              "#EC NO_HANDLER
    CATCH cx_fp_api_internal.                           "#EC NO_HANDLER
ENDTRY.
DATA: l_outputparams TYPE sfpoutputparams.
*Start Form Processing.
l_outputparams-getpdf = 'X'.
CALL FUNCTION 'FP_JOB_OPEN'
    CHANGING
      ie_outputparams = l_outputparams
    EXCEPTIONS
      cancel          = 1
      usage_error     = 2
      system_error    = 3
      internal_error = 4
      OTHERS          = 5.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
    WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
Add a call to the Formu2019s function module. Notice the
settings on fp_docparams that allow for the generation
of an Interactive form Without these settings the form
will be generated as standard print form. Hint: Get the
form functional moduleu2019s generated name by testing it in
transaction SFP, and then use the Pattern wizard to insert
the function callin your code.
DATA: fp_docparams TYPE sfpdocparams,
        reservedonly TYPE bapisbodat-reserved,
        booking_data TYPE bapisbonew,
        fp_result    TYPE fpformoutput.
fp_docparams-fillable = 'X'.
fp_docparams-langu = sy-langu.
CALL FUNCTION l_name
    EXPORTING
      /1bcdwb/docparams = fp_docparams
      reserved           = reservedonly
      booking_data       = booking_data
    IMPORTING
      /1bcdwb/formoutput = fp_result
    EXCEPTIONS
      usage_error        = 1
      system_error       = 2
      internal_error     = 3
      OTHERS             = 4.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
    WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
Get the returned PDF, and store it in a
fpformoutput-pdf type variable.
DATA: pdf TYPE fpformoutput-pdf.
_ pdf = fp_result-pdf._
*Close the form processing session by calling the
*FP_JOB_CLOSE function.
CALL FUNCTION 'FP_JOB_CLOSE'
    EXCEPTIONS
      usage_error    = 1
      system_error   = 2
      internal_error = 3
      OTHERS         = 4.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
    WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
Set the content type to be of u201Capplication/pdfu201D. This way,
the client will know what kind of format the response is,
and will start the adobe reader to display it.
CALL METHOD response->set_content_type
    EXPORTING
      content_type = 'application/pdf'.
*Put the PDF into the response.
CALL METHOD response->set_data
    EXPORTING
      data = pdf.
endmethod.
error is in the line 74 in this coding line 74 is
pdf = fp_result-pdf.
Can any one suggest me some solutions.
Thanks,
Nethaji.

Hi,
I'm facing the same problem.
I wrote an very easy report. It works as intended, but when i set fillable='X' i get the error FPRUNX 001.
FP_GET_LAST_ADS_TRACE return following:
Begin operation:
Render, elapsed time = 16 ms.
#   End operation: Render, elapsed time = 89 ms.
#   Begin operation: UsageRights, elapsed time = 89 ms.
#   End operation: UsageRights, elapsed time = 97 ms.#
...and the error string of FP_GET_LAST_ADS_ERRSTR is:
ADS: Request start time: Wed Jul 01 14:44:26 CEST 2009(200.101).
Any idea what the problem might be?

SOAP to proxy scenarion error An error occurred during the processing of proxy E 00 001 The message can not be processed in plugin mode HTTP

Hi all
My scenario is soap to proxy scenario .while testing using soap to proxy i am getting " An error occurred during the processing of proxy E 00 001 The message can not be processed in plugin mode HTTP: in sxmb_moni sap pi .
Some times this interface is failing and some time its successfully processing.
While testing with successful xml data also i am getting the same error in sxmb_moni.
I modified the proxy inbound code where passing error message and still i am getting the same message.
Please suggestion the same for error solving.
Regards
Ravi.

Hi,
I'm facing the same problem.
I wrote an very easy report. It works as intended, but when i set fillable='X' i get the error FPRUNX 001.
FP_GET_LAST_ADS_TRACE return following:
Begin operation:
Render, elapsed time = 16 ms.
#   End operation: Render, elapsed time = 89 ms.
#   Begin operation: UsageRights, elapsed time = 89 ms.
#   End operation: UsageRights, elapsed time = 97 ms.#
...and the error string of FP_GET_LAST_ADS_ERRSTR is:
ADS: Request start time: Wed Jul 01 14:44:26 CEST 2009(200.101).
Any idea what the problem might be?

Error message in Command line (cannot mount database in EXCLUSIVE mode)

Hello Experts
I'm new in Oracle and trying to connect to my database though SQL command line. After I login as SYS I user I get the message that 'connected to idle instance'. Then I use “STARTUP” to connect to database. Now from my understanding it should mount the database and open it as well. But it does'nt happens.Instead I get the message 'cannot mount database in EXCLUSIVE mode' . I'm not sure why it can't mound the database and what should I do to make it working. Please can somebody show me how to make it working again. Here are the details about my problem
Enter user-name: SYS as SYSDBA
Enter password:
Connected to an idle instance.
SQL> startup
ORACLE instance started.
Total System Global Area 595591168 bytes
Fixed Size 1220748 bytes
Variable Size 301993844 bytes
Database Buffers 285212672 bytes
Redo Buffers 7163904 bytes
ORA-01102: cannot mount database in EXCLUSIVE mode
Thanks a lot in advance.

Thank you so much for both of you. I've checked everything. All looks fine to me and then i tried to connect though SQL and it worked. Now what I've notice that this time I didn't start Enterprise Manager only I started the listner and then start sql it worked. Does this means that I can't use both SQL and EM at a time together?

Purchased books from iTune store and downloaded it. Now, when I try to send it to my iPod nano, I get an error message saying the title cannot be found. I cannot find a screen that offers an option to re-download. What gives?

I purchased a box set of books on iTunes, and downloaded them. The title shows up in the "purchased" section, but when I try to send it to my iPod nano, I get an error message telling me it cannot be moved because it cannot be found. I can't find a screen anywhere offering the option to re-download either. I've paid for the books, but cannot access them! Every time I upgrade iTunes, it gets more confusing and harder to use.

Also I now can`t access any of my itunes library and am concerned that if I remove it from my computer I will lose everything as I have no option of accessing and therefore backing anything up. Any ideas?

Can't install itunes - error message "the folder "itunes" cannot be found

Help. I just bought a new Iphone and can't get itunes to load. I had itunes on my computer for several years for my nano - haven't synced up in about a year. Went to open it and got the following error message
The folder "itunes" cannot be found or created and is required. The default location for this folder is inside Mu Music folder"
I have uninstalled everything - quicktime, apple mobile, every single file. I have rebooted, run searches to make sure there were no files at all left - did it through control panel, search etc., rebooted and downloaded it again (this make about 5 times now) and still get that same message that the folder cannot be found. Help! I just blew about $400 in the Apple store!
Can anyone help me?

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2

When I download photos from a flash drive,everything is fine and they show in Events and Pictures, but when I click on the individual pic I get an error message saying that it cannot locate the JPG. Any thoughts?

When I download photos from a flash drive,everything is fine and they show in Events and Pictures, but when I click on the individual pic I get an error message saying that it cannot locate the JPG. Any thoughts?

It sounds like your iPhoto Advanced preferences are set to not copy photos during import, i.e. a Referenced library:
Check your Advanced preferences to see if that's the case. If it is the best solution would be to select the checkbox to copy the photos and reimport the photos from the flash drive. Then check the new import. It it was OK you can delete the previous event with the "missing" photos.
OT

Error message from Adobe Reader. cannot extract the embedded font 'LICCMC+MyriadPro-Light'. some characters may not display or print correctly. Print looks like gibberish

Trying to view/print PDF documents from website. Print looks like gibberish and is unreadable. Problem is with the embedded fonts. Error message from Adobe says cannot extract the embedded font 'LICCMC+MyriadPro-Light'. some characters may not display or print correctly.

Try Adobe support, that's not a Firefox support issue. <br />
http://forums.adobe.com/index.jspa

I have no trouble viewing apps in the iTunes Store on my iPad. However, every time I try to install a new app, I get an error message after a while - cannot connect to iTunes Store. This issues cropped up two days ago on my new iPad. Please help...

I have no trouble viewing apps in the iTunes Store on my iPad. However, every time I try to install a new app, I get an error message after a while - cannot connect to iTunes Store. This issues cropped up two days ago on my new iPad. Please help...

JUst experienced the exact same problem after changing password.Getting same message. Hope someone has an answer for this.

I installed adobe digital editions but when I want to authorize a device (an e-reader) it doesn't work, I receive an error message that digital editions cannot connect with the activation server. what can I do?

I installed adobe digital editions but when I want to authorize a device (an e-reader) it doesn't work, I receive an error message that digital editions cannot connect with the activation server. what can I do?

Please quote the exact error message, word-for-word, verbatim.
What is your operating system?
What version of Lightroom?

IPhone 4 stuck in recovery mode, iTunes error message pops up saying cannot be restored...how do I go about this?

Hi all..hoping someone can help me out with this.
So I recently lost my iPhone 5, therefore I am going to use a friend's old iPhone 4 in the meantime. The iPhone 4 has been jailbroken, but I wanted to do a reset to clear the jailbreak as well as just clear all other data, so that I can just restore my own iCloud backup & use with my own data.
However, the problem I am now faced with is that the phone is in recovery mode, and when I plug in the phone to my computer...I am given the options to click Restore. But after all the time it takes to update the software and supposedly doing its thing with "restoring" the phone....turns out no luck, i get an error message saying the phone cannot be restored. And now I pretty much can't do anything because I do not know how to do a reset of any sort to get out of this recovery mode.
PLEASE HELP. first time losing phone, first time trying to figure out how to reset and get out of recovery mode. I just want to be able to reset and then restore with previous backup..
I really appreciate the help. Thanks in advance.
*please ask any questions that you may need in order to help me solve this, since I am not exactly sure how to word some of these problems*

If using windows...
Temporarily disable your firewall and antivirus software and try again...
http://support.apple.com/kb/TS1379
See iTunes Connection Issues here...
iTunes for Windows: Troubleshooting security software issues
More info on unable to Update or Restore > http://support.apple.com/kb/HT1808
Note:
Make sure you have the Latest Version of iTunes (v11.1.5) Installed on your computer
iTunes free download from www.itunes.com/download

I can no longer back up my iphone to my computer on selecting 'sync'. I can back up to iCloud but I get an error message telling me I cannot backup to my Mac. Can any one help? It's driving me crazy!

I can no longer back up my iphone to my computer on selecting 'sync'. I can back up to iCloud but I get an error message telling me I cannot backup to my Mac. Can any one help? It's driving me crazy!

Hello joelfromn. charleston,
It seems you are unable to activate iMessage on a device with no carrier service. The following article provides information regarding activation issues:
If you get an error when trying to activate iMessage or FaceTime - Apple Support
Check your device settings
Make sure that you’re connected to a cellular data or Wi-Fi network. If you're using an iPhone, you'll need SMS messaging to activate your phone number with iMessage and FaceTime. Depending on your carrier, you might be charged for this SMS.
Go to Settings > General > Date & Time and make sure that your time zone is set up correctly.
Thank you for contributing to Apple Support Communities.
Cheers,
Bobby_D

Not able to install Logic on mac with OSX. 10.8.2. Error message: Logic Studio.mpkg cannot be opened as the power pc programs are no longer supported. I have logic studio 8 software purchased in 2007 and upgraded with logic studio 9 (purchased in 2009)

After an earlier attempt to move Logic from my other mac (OSX 10.6.8) with the migration assistant to my new mac with OSX 10.8.2. I've re-started the whole start up process by erasing the hard drive from the new machine and build it up from scratch. After a new "out of the box" start, I decided to install LOGIC from my disks : starting with my 2007 package Logic Studio 8 and upgrading with my Logic 9 package from 2009. When trying to start to install 2008 I got the error message : Logic Studio.mpkg cannot be opened as the power pc programs are no longer supported.
What does this mean? HOw do I get this working under 10.8.2 as it works flawlessly under OSX 10.6.8. For sure I didn't buy a new machine to have OSX 10.8.2 but I suspect this is the roadblock to installing my logic package.
Help!

Mark,
Sorry...
I completely lost the thread (I actually got confused between you and another poster on a another forum that was asking the same basic question) and somehow ended up thinking you were trying to install on a PPC Mac
My apologies and please ingnore those parts of my last post relating to the PPC Macs...
You have an Intel Mac and therefore Logic Studio 2 Boxed Upgrade set should install/run on your Mac without issue. As I said earlier.. you do not need to try and install from the original Logic Studio 1 /Logic 8 Boxed set...(It won't work anyhow because you have an Intel Mac and that version had a PPC installer) but just install from the Logic Studio 2 / Logic Pro 9 Upgrade Boxed setof DVDs instead...
Have you tried the "Make Disk Image" solution I gave earlier? That normnally works under such circumstances as what you are describing can happen when your DVD drive cannot read the DVDs correctly... I have had this situation myself where one drive read them okay and another failed to do so for whatever reason. Making and then installing from Disk images of those exact same disks resolved the issue for me...
You can try to reinstall directly from the DVDs of course though under some circumstances it may not allow you to reinstall Logic Pro itself if that part of the original installation attempt was successful... in which case you can also try this... (It's probably the easiest method if Logic 9 was already installed and present in your Apps Folder)
If the Logic Pro App is in your applications folder..
Run Software Updates to update Logic Pro to a version that will run under 10.8.2 (The initially installed version of Logic will not)
Run Logic
Go to the menu bar in Logic and select Logic Pro/Install Additional Content and select all content in there..
This content is basically exactly the same as what is stored on the remaining DVDs of the boxed set so you might not need to use the rest of the DVDs to install from but download it all instead from Apple Servers...

BSP Error:Message E BL 203 cannot be processed in plugin mode HTTPs

Similar Messages

Maybe you are looking for