BSP for Creation and change and display of the documents in SAP R/3.

Dear All,
In SAP R/3 system, the documents can be maintained using the T-Codes CV01N, CV02N, CV03N for creation, change and display of the documents. Users is allowed to access to these transaction using the BSP application. The BSP page would be used to enable access the T-Code CV01N, CV02N, CV03N and allow uses to carryout the functionalities of check in and checkout of the document and the object links.
do i need to replicate all these T-Codes in BSP application?
If anybody hv done this...pl suggest me and give me the code.
Thanks & Regards
Pradeep
Message was edited by:
Pradeep Reddy

if you want this out of BSP, yes you have to code all of them there is not easy way.
but if the idea is to webenable these transaction and you dont have much time/resource to do it , easiest way is to go with ITS. downside of this is that you dont have much control over look and feel.
If you are on WAS6.40 or above your application server comes with integrated ITS and enabling the same is quiet simple.
Regards
Raja

Similar Messages

Hello everyone. I have my itunes account for some years, and i've purchased far too many apps and music. Now the company i work for, has to change my account in the iphone, in order to use the corporate mails and calendar. How can i keep my applications?

Hello everyone. I have my itunes account for some years, and i've purchased far too many apps and music. Now the company i work for, has to change my account in the iphone, in order to use the corporate mails and calendar. How can i keep my applications and music?

Read here:
http://support.apple.com/kb/ht5621
Changing your Apple ID to your current, working email address will not create another Apple ID, it will only change it to your working email address.

SharePoint PPS 2013 Dashboard Designer error "Please check the data source for any unsaved changes and click on Test Data Source button"

Hi,
I am getting below error in SharePoint PPS 2013 Dashboard Designer. While create the Analysis Service by using "PROVIDER="MSOLAP";DATA SOURCE="http://testpivot2013:9090/Source%20Documents/TestSSource.xlsx"
"An error occurred connecting to this data source. Please check the data source for any unsaved changes and click on Test Data Source button to confirm connection to the data source. "
I have checked all the Sites and done all the steps also. But still getting the error.Its frustrating like anything. Everything is configured correctly but still getting this error.
Thanks in advance.
Poomani Sankaran

Hi Poomani,
Thanks for posting your issue,
you must have to Install SQL Server 2012 ADOMD.Net on your machine and find the browse the below mentioned URL to create SharePoint Dashboard with Analysis service step by step.
http://www.c-sharpcorner.com/UploadFile/a9d961/create-an-analysis-service-data-source-connection-using-shar/
I hope this is helpful to you, mark it as Helpful.
If this works, Please mark it as Answered.
Regards,
Dharmendra Singh (MCPD-EA | MCTS)
Blog : http://sharepoint-community.net/profile/DharmendraSingh

What are the config steps for contract mass change and quota arrangement?

Hi friends
what are the config steps for contract mass change and quota arrangement?
Regards
Raj Kumar

Process Flow
The mass change process consists of four steps. You navigate between these steps by choosing the Next and Back buttons located at the bottom right-hand corner of the screens.
       1.      Search for contracts
You search for and select the contracts or the contract hierarchy that you want to change.
Contracts that have the status Closed cannot be changed.
       2.      Define mass changes
You specify the changes you want to make.
You make changes at header data level and at item data level by choosing the relevant change methods. A green tick appears next to each change parameter so that you can see where changes are already active.
Once you enter this step, the documents you have selected to be changed are locked so that other users cannot make changes to them until you are finished with this process.
       3.      Simulate mass changes
Here you can perform a trial run of your mass changes. This simulation step is optional.
We recommend that you perform this step so that you can check how the change methods you have chosen will be processed by the system.
You receive status messages about the change methods for each contract and can quickly see whether any errors arise in connection with the proposed changes at this stage. From this step, it is easier for you to go back and correct the error than after applying the changes.
Background processing
The system processes the changes in the background.
If there are a large number of contracts to be processed, this step could take some time to complete. In this case, you can leave the transaction so that you can, for example, carry out other tasks in the meantime.
The system sends you an e-mail once the simulation step is complete. The e-mail contains a link to the relevant screen in the application so that you can return to it when it is convenient for you to do so. If you have left the SRM application, you can only return via this link.
Here you can see the status of the changes and, if necessary, you can correct any errors by going back to the Define mass changes step.
The messages that you receive in the simulation step are not confirmation that a change has been performed. They simulate the messages you get after you apply the changes. You must complete the final step of the mass change process and apply the changes before they take effect.
       4.      Carry out mass changes
Here you apply the changes to the contracts.
You cannot reverse this step, which is why we advise you to perform the simulation step beforehand.

How can I change one section of the document to a landscape orientation and not the whole document?

How can I change one section of the document to a landscape orientation and not the whole document?

Page Setup, including page orientation, is done in the File menu. The setting applies to the whole document. As Peter says, you can rotate the contents of a page (not including the text layer of a word processing document).
As an alternative, you could use Numbers, where Sheets are empty canvases onto which you may place images, charts, tables and text boxes, and where page orientation may be set for individual Sheets. The main tradeoff is that you lose many of the built-in word processing and page layout features of Pages.
Regards,
Barry

JPG files copied to Philips Picopix 3410 are currupted with a prefix of ._ and will not display on the PicoPix

JPG files copied to Philips Picopix 3410 are currupted with a prefix of ._ and will not display on the PicoPix. Help please?

There are a couple of ways to remove these items from the drive.
One is with the $15 shareware app, BlueHarvest. It will remove the AppleDouble files from the drives you want the ._ files removed from, and has an option to prevent them from being written to non Apple formatted drives in the first place.
But the free and pretty easy way to do it is to use Terminal. From what I can see in the manual for your projector, you can only get images to it on either an SD card or a USB flash drive. So I'm going to assume a USB drive for the following.
Plug in your MS-DOS formatted drive so it appears on the Mac desktop. Open Terminal and enter:
dot_clean -m
Enter a space after the -m . Then drag and drop the icon of your flash drive into the Terminal window. It will fill in the path of the drive. Press Enter. All ._ files will be removed from that volume.
Actually, I think it removes all files that start with a period. None of which are of any great importance on a DOS formatted drive. Such as the hidden trash for that drive. The next time you plug the drive in, OS X will simply recreate it.

Hi. My id country was Saudi Arabia and I bought lots of apps from it. Now I moved to USA and changed my id counrty. the problem now is that every app that I buy in the USA store and I had already bought in the Saudi store won't appear on my purchased list

Hi. My id country was Saudi Arabia and I bought lots of apps from it. Now I moved to USA and changed my id counrty. the problem now is that every app that I buy in the USA store and I had already bought in the Saudi store won't appear on my purchased list

Tell me exactly how much you have in your store credit and I"ll let you know the best solution.
Also, I'm not 100% sure, but when you switch back to S.A., Apple MAY track your IP and still give you probs if they figure you're trying to get around this problem without moving out of America. But we won't know for 100% until we try it.
If your store change is less than the price of a single song, then you can ask the iTS support to just cash-out that balance. They'll probably send you a response to reverify this first though.
iTunes Store Support
http://www.apple.com/emea/support/itunes/contact.html
Once you change back to S.A. please let us know if you can still see the purchases in the Cloud or not from your US I.P. address as I'm curious if they've fixed this exploit fully or not.

My phone has been changed under warranty by the apple store in germany. ı need a change document to register the phone in my country again. ımeı numbers of old and new must be in the document.you can send an mail in pdf format as soon as possible please.

my phone has been changed under warranty by the apple store in germany.
ı need a change document to register the phone in my country again.
ımeı numbers of old and new must be in the document.you can send an mail in pdf format
as soon as possible please.
your's respectfully.
new phone serial no:DQ******TC0
old phone serial no:DN*******T9Y
Product:
iPhone 4S
Serial Number:
DN*******T9Y
Service Requested:
December 3, 2012
Status:
Repair Complete
<Edited by Host>

No we cannot send it to you because we are users just like you and Apple does not monitor these forums.
But you can find the IMEI numbers yourself. Read the ENTIRE article:
http://support.apple.com/kb/HT4061

When the image is uploaded on the server and it is displayed on the web pag

Dear frenz,
How the image is uploaded on the server which is at the specifiecd URL and it is displayed on the web page?
Regards,
Jasmeen

it is as simple as doing with a java program .Just place the image file inside your webapps folder and the rest will be done by webserver.

I recently had to restore my Iphone 4s and ever since I cannot double click the home button whilst the phone is locked and change my music. The controls come up and I can adjust the volume but I cannot change the songs. Help needed please!!

I recently had to restore my Iphone 4s and ever since I cannot double click the home button whilst the phone is locked and change my music. The controls come up and I can adjust the volume but I cannot change the songs. Help needed please!!

Have you guys been able to activate your iphone yet? I bought an iphone 4s from eBay and it worked fine, but the previous user had left some data on it, so last night I used the "erased all content and settings" to restore it to factory setting so I can start fresh and restore my backup. But now I'm stuck at the activation screen (I get the same "the activation server is temporarily unavailable") and can't get it to activate, even if I use my old deactivated AT&T sim card (I'm on straighttalk now).
I might try activating it with an active AT&T sim card from my fiancee's phone when she gets home, so I'll let you know how that works outs.
If it's true that the server is down; anyone know when it will be back up again? Thanks in advance.
iPhone 4s iOS 5.1.1 (9B206)
Carrier AT&T 12.0
Modem Firmware 2.0.12

Does anyone know how to use pages so you can export pdfs from the internet and automatically drag words from the document into the file name of the pdf (i.e., author, title of a scientific paper)

Does anyone know how to use pages so you can export pdfs from the internet and automatically drag words from the document into the file name of the pdf (i.e., author, title of a scientific paper). For example, if I am downloading a paper by smith called "Surgery" that was published in 2002, it will automatically set the file name in the download to smith- surgery 2002. I have heard pages is smart enough to do this.
thank you

Pages can export only its own documents. They may be exported as PDF, MS Word, RTF or Text files.
Pages can import (ie. Open a file as, or Insert a file into, a Pages document) documents in several formats, but won't rename the document as you describe. Documents that can be Opened (eg. Text, AppleWorks 6 WP, MS Word files) are converted to Pages documents, and retain their original names, with .pages replacing the original file extension. Files that can be Inserted (generally .jpg, .pdf and other image files) become part of the existing Pages file and lose their names.
It may be possible, using AppleScript, to extract the text you want and to Save a Pages file using that text as the filename, but that would depend in part on being able to identify which text is wanted and which is not.
How will the script determine where the author's name begins and where it ends?
How will the script recognize the beginning and of the title, an decide how much of the title to use in the filename?
How will the script recognize the year of publication?
For papers published in a specific journal, with a strict format for placing each of these pieces on information, or containing the needed information as searchable meta data in the file, this might be possible. But it would require knowledge of the structure of these files, and would probably handle only papers published in a specific journal or set of journals.
Outside my field of knowledge, but there are some talented scripters around here who might want to take a closer look.
Best of luck.
Regards,
Barry

When I save a pages document as a pdf and then try to email the document, it loads as an application octet-stream dat file instead of a pdf. What's happening?

When I save a Pages document as a pdf and then try to email the document, it loads as an application octet-stream dat file instead of a pdf and recipients can't open it. Some load correctly, but about half don't load as a pdf. What's happening?

Hi mjmonck-
Which email provider are you using? There are different solutions possible for different providers. Yahoo is having trouble with attachments, outside of any Firefox issue. I've seen a Google user fix this by manually adding the mail URL to their ad block program- which mistakenly perceived the webmail page as an advertisement.
Hope this helps.

I am using Adobe XI Pro and in various parts of the document there is brown / biege lettering when on the document it shows as black. My printer guy has been in and checked it out top to bottom and that part is fine. I have tried to print the same docum

I am using Adobe XI Pro and in various parts of the document there is brown / biege lettering when on the document it shows as black. My printer guy has been in and checked it out top to bottom and that part is fine. I have tried to print the same document and it comes out fine. Any ideas ? Using Windows 7 Service Pack 1

Sorry my bad. I have tried to print the same document on another printer and all the formatting is fine.

I have a word document that I have put hyperlinks in and turned into a pdf. When I email and receiver opens in iPad the document is blank. When I do a file save as pdf the document appears and the hyperlinks work but the document has much of the content

I have a word document that I have put hyperlinks in and turned into a pdf. When I email and receiver opens in iPad the document is blank. When I do a file save as pdf the document appears and the hyperlinks work but the document has much of the content turned into symbols. What is going wrong?

You select the printer properties and set the appropriate page size (I think there is a place to set it in PDF Maker too, but not sure). In the printer, this is equivalent to putting the proper paper in the printer.

Our organization uses an Oracle database hosted on a Unix platform and one of our data processing outputs is a "stuffer" document that has a barcode, and Unix jobs automatically send the document to a printer. Is there a way, or does Adobe have a produc

Our organization uses an Oracle database hosted on a Unix platform and one of our data processing outputs is a “stuffer” document that has a barcode, and Unix jobs automatically send the document to a printer.
Is there a way, or does Adobe have a product or solution, to create a PDF version of the document including the barcode, before it’s sent to a printer?

What format is the document that is printed? Or what technology is used to format the printer? There isn't a standard way of doing things in Unix.

BSP for Creation and change and display of the documents in SAP R/3.

Similar Messages

Maybe you are looking for