BSP is working as a URL but not as a BSP iView

Hello,
I have created a certain BSP page.
If I open it's URL on the server directly: https://<server>:1443/sap/bc/bsp/sap/zgpd_upload/default.htm
it is working but if I build a BSP iView on top of it hangs when I open it (loads and loads forever).
If I try to reach it as a URL from inside the portal (using URL iView) it can't locate this address. The error I receive is:
"Unable to fetch site .Error # 302"
At first I thought it is an issue with the proxy service configuration on the portal but on our test this application is working with the same proxy configuration.
Any ideas?

two things you need to do.
1. go to transaction SE80, from the dropdown choose BSP application and in the input field just below the dropdown enter your BSP application name. and hit enter.
no you will see a tree structure below the inputfield with root node being the name of your BSP application, right click on it and click activate.
2. go to transaction SICF and expand the default_host node and go to sap/bc/bsp/sap/
there you should see your BSP application name and right click on it and click activate. (if activate is grayed out, that means its already active)
now run your BSP it should work fine.
Regards
Raja

Similar Messages

OSA-Error message shows up in R3, but not in Portal(BSP)

Hello,
I'm working on Objective Setting & Appraisal with workflow & portal. At the template level I've put some business check which if not met at the document level throws up error msg. This works fine in R3 and the error msg is shown at the bottom of the screen at the status bar.
But this same error msg doesn't show up when I open the document in the portal through workflow. The appraisal document opens in the portal through BSPs. When the condition is not met, on saving or submitting the page remains there ... but no error msg. We tried to show the error msg as a pop up and the pop up works fine in R3 but not in portal.
Pls advice how to solve this problem.
JKT

Hi Sameer,
We have used the application hap_document under BSP Application. And we have not used any standard user exit. All we have done is created a new enhancement under HRHAP00_DOC_BC ;ie; Appraisal Document - Business Check.
I can see one document_error.htm Document - Error Handling. Do I have to do anything with this page ? if so, should it not call this page automatically whenever there is an rror msg ?
Pls suggest. Thanks

Html link to pdf works ok on mac but not on ipad. adobe reader for ipad downloaded.

HTML link to pdf works ok on Mac but not on ipad. Adobe Reader for ipad downloaded. What's wrong?

Hi pwillener,
Thank for reply. The pdf’s are in a subfolder “PDF” of the folder holding the web page. The web page itself uses
. This works in full size computer browsers but not in an iPad.
My excursion through the search engine has produced the idea of adding #page = requesting page to the URL but I have not had time to try it perhaps without the = sign.
Bryan

My applet works in the appletviewer but not in the navigator

My applet works in the appletviewer but not in the navigator
exceptions problem1 and problem2 are throwed
this is my code
import java.applet.*;
import java.net.*;
import java.io.*;
import javax.swing.*;
import java.awt.*;
import java.awt.event.*;
public class ValiderHtml extends Applet implements ActionListener {
JButton send =new JButton("Connexion");
JScrollPane jscrollpane= new JScrollPane();
DefaultListModel lignes=new DefaultListModel();
JList lstURL = new JList(lignes);
BufferedReader reader = null;
String ligne;
URL url;
URLConnection conn;
   public void init(){
   this.setSize(900,400);
   setLayout( new GridLayout(2,1));
   jscrollpane.setBounds(new Rectangle(19,53,160,73));
   jscrollpane.getViewport().add(lstURL,null);
   send.addActionListener(this);
        this.add(send);
   this.add(jscrollpane);
    public void actionPerformed(ActionEvent evt) {
         Send();
   public void Send(){
        try {
   url=new URL("http://www.developpez.com");
   conn = url.openConnection();
   reader = new BufferedReader(new InputStreamReader(conn.getInputStream()));
while ((ligne = reader.readLine()) != null) {
                 lignes.addElement(ligne);
    }//fin bloc try
   catch (Exception e) {
               lignes.addElement("probleme1");
            finally{
               try{reader.close();}catch(Exception e){ lignes.addElement("probleme2");}
   }// fin Send
      public void paint(Graphics g) {
            super.paint(g);
}// fin Applet

As for tracking the source of your problem your applet sucks.
Try e.printStackTrace() on a cought exception and check the (full) trace.
url=new URL("http://www.developpez.com");
Unless yor applet is on www.developpez.com this will throw an exception in an unsigned
applet without special policies.
Signing applets:
http://forum.java.sun.com/thread.jsp?forum=63&thread=524815
second post and last post for the java class file
http://forum.java.sun.com/thread.jsp?forum=63&thread=409341
4th post explaining how to set up your own policy with your own keystore

How do I troubleshoot installation/distribution of a LabVIEW .exe which processes data using Matlab when it works on some computers but not others?

I've been given the unenviable task of troubleshooting and installing/distributing software written by a former co-worker. I've modified the LabVIEW code and built an .exe file. I've successfully installed the Labview .exe file on several computers, but it won't work on some others. What's more baffling is that I installed it successfully on one computer, uninstalled it, and tried reinstalling it with no success. In fact, it's a new error (Dr. Watson for Windows NT application error). It doesn't help that I have different versions of LabVIEW and Matlab on the target computers. Some have LabVIEW 5.1, some
have 5.0, and some don't have it at all. Some have Matlab 5.2, some have 5.3 (R11) and some have 6.0 (R12). It's also not clear to me where the Matlab m files should be located. I'm not sure if it's a LabVIEW Runtime Engine problem, or if it's a Matlab problem. I've also wondered how LabVIEW and Matlab talk to each other. When LabVIEW calls Matlab, it seems that Matlab is running in the background. In other words, clicking on the Matlab Command Window and typing "whos" or any other command/variable doesn't work.

Jay del Rosario wrote:
>
> How do I troubleshoot installation/distribution of a LabVIEW .exe
> which processes data using Matlab when it works on some computers but
> not others?
Poke around zone.ni.com and
http://digital.natinst.com/public.nsf/$$Search/ .
Good luck, Mark

Site works in the app, but not in the browser.

Hello iWeb experts,
I've got problems.
Last night I published my site. And while it appears, and functions, properly in my iWeb app, it doesn't do the same in Safari, Firefox, and Internet Explorer.
Two issues...
FONTS
I chose Bellamie, Univers Condensed, and Marydale as my fonts. From reading these forums, I've discovered those won't wysiwyg on other computers if the fonts aren't available and open on them. So my two choices are to make every bit of text a graphic or to use a set of more universal fonts, correct? So my questions are...One, is there a list somewhere of fonts that will work in any browser? And, two, is there a short-cut, or easy way to transform type into a graphic without having to create image files?
FUNCTIONS
Here are the functions that work fine in iWeb but have gone haywire in all of the browsers I tested...
• The type in one nav link appears smaller than all the rest.
• Some links are active, others are not.
• Rollover highlighting works on some links, but not others.
• Most of the rollover links appear in the proper static color, a few do not.
I've tested these functions on three Macs, one PC, and in the three browsers mentioned above. All of them show the exact same problems. So something must be going wrong with iWebs coding, or my host server musn't like iWeb.
Any thoughts, suggestions on these two issues? Thanks much for any advice.
John
PS - For reference, see: www.johnrunk.com

Fascinating, Kirk (+he types with one raised eyebrow+).
QuickTimeKirk wrote:
When I drag across your page most of your links do not change. The "text" portion of them doesn't change, either. Something is covering them.
I can see that. But for the life of me, I don't know what could be covering those links. In my app, when I click in the area of the links, the type is the first item selected. Unless, possibly, it could somehow be the faint reflection of my black-and-white image (me & the ground I stand on). Hmmm...
QuickTimeKirk wrote:
Single click (outside the boundaries of your page contents) and an "outline" will appear. It shows the image file dimensions and locations.
This I don't see. An outline? As in "an object outline," or as in "a list of dimensions and locations?" When I click outside my page contents, I get nothing.
Thanks, QTK. I truly appreciate your troubleshooting here.
John

Can get the AirPlay to work off my computer, but not my iPhone or iPad. I have the latest software. Airplay logo never appears on iPhone or iPad.

Can get the AirPlay to work off my computer, but not my iPhone or iPad. I have the latest software. Airplay logo never appears on iPhone or iPad.

Try here > http://support.apple.com/kb/TS1538

HT5787 How can I change an old email to a new one? For some reason my old email comes up on my iPhone - and I don't get access to change to my new email which I have on my iCloud account on my pc. My AppleID works on my pc, but not on my iPhone!

How can I change an old email adress on my iCloud accout to my new email (the same as on my pc), as long as my Apple ID works on my pc but not on my iPhone?
Br
Finn

You would have to change it back to your old email address in order to turn off "Find My iPhone" on your devices. After you changed it back to your old address and deactivated "Find My iPhone" (activation lock) you could change your Apple ID to your new address again. Now it should wok on all your devices.

LR 5.6 on Mac desktop all of a sudden will not read any card from any reader but will work on my laptop. I can work on previous images but not import new ones. Even if I create a catalog on laptop and import to my desktop on a thumb drive, the images are

LR 5.6 on Mac desktop all of a sudden will not read any card from any reader but will work on my laptop. I can work on previous images but not import new ones. Even if I create a catalog on laptop and import to my desktop on a thumb drive, the images are only accessible as long as the thumb drive is inserted.

Sounds like you may need to repair the Disk Permissions on your drive where your images are stored.

I have a bluetooth headset that only works in phone feature but not in itunes or apps on my iphone, please help

I have a bluetooth headset that only works in phone feature but not in itunes or apps on my iphone, please help.
It works fine through my macbook, can't find anything in settings on iphone to resolve problem

The headset has to have A2DP capability, which most (I believe) do not.
http://en.wikipedia.org/wiki/Bluetooth_profile

When i burn videos to a dvd-r disc it works on my macbook but not on a windows/pc or my dvd player. How can i make it work on all the above and not just a mac product?

when i burn videos to a dvd-r disc it works on my macbook but not on a windows/pc or my dvd player. How can i make it work on all the above and not just a mac product?

Unfortunately, the recording & movie industry does not respect the rights of the people who make them money, and thus you can only use the paid-for content in ways they see fit. Even if I lived in a bunker where no one else could possibly see the movie I paid for, therefor I'm not 'sharing it illegally', I would still not be allowed in a blue moon to copy that movie to DVD for TV viewing. Someone will tell you to get an AppleTV. How about Apple give us one for free? Until this changes, people wanting to use their content in multiple locations will continue to download music & movies via torrents, legally or illegally.

I-pod touch works on a Mac but not a PC

Please help! My I-pod touch works on a Mac but not a PC. When hooked up to a PC, the device is not recognized in I-tunes message, says I-pod in recovery mode and to restore, after checking update and restore, receive unknown error message (9). Have tried unistaling and reinstalling I-tunes, using different USB ports, creating new user, restarting computer, using different PC, and trying to reset by holding sleep/wake and home buttons all to no avail, very, very frustrated, everything is fine on a Mac!!

I have CA Internet Security Suite Plus 2010, version 6.0.0.264.
I was wondering about that one in particular.
Try configuring you CA as per kalda01's instructions in this post:
http://discussions.apple.com/message.jspa?messageID=10525876#10525876
(Sometimes switching the security software off doesn't help, but doing the configuration does help. Not sure what's afoot with that, but it has happened with other security-package problems with iTunes in the past.)

When I send an email with bcc recipients, the bcc does not show in my sent mail so I can't reference back later who I sent the email to. Worked in Snow Leopard but not in Yosemite. Please advise if their is fix for that.

When I send an email with bcc recipients, the bcc does not show in my sent mail so I can't reference back later who I sent the email to. Worked in Snow Leopard but not in Yosemite. Please advise if their is fix for that.

Did you select View->Bcc Address Field from the menu bar?

G4 iBook works in Safe Mode, but not in regular mode (stuck on blue screen)

14" iBook G4 1.2GHz with 1 gig of RAM.
I recently had an issue with this machine in that the image on the screen would freeze but the cursor would be able to move around. This was narrowed down to an issue with the logic board. I wanted something a little more permanent than a shim, so I sent the board in to have it reballed.
After installing the maching back into my iBook, it seemed to work fine until I applied a software update to the machine.
It was then that I got to experience the first of many kernel panics.
Restarting at different times always brought me to the dialog box which states that the machine needed to be restarted in multiple languages.
Running the Apple Hardware Test off my install disks yielded this error code: 2ATI/2/4:113-xxxxx-125
I have no idea what that means. I do know that just before I got the results of the test, the screen changed to all kinds of colors. It was only for a few seconds and then the results (with the error code) were displayed.
Still, not sure what to do next, I tried resetting the PRAM. I also tried resetting the NVRAM.
I also tried booting up into Safe Mode which actually worked. There were no issues with the machine and everything seemed to be working fine.
When I tried to restart the machine in regular mode, I'm taken to the infamous blue screen and the machine just stays there. When I let the machine stay off overnight, it booted up normal, but after applying the software update, the machine was in kernel panic again.
I've tried running fsck, but nothing changes.
I'm still not sure why it seems to work in Safe Mode but not in regular mode.
I'd appreciate any suggestions or ideas.

Hi,
A couple of the things that are disabled in safe mode are AirPort and non Apple startup items. The easiest thing for you to test is the AirPort card. Shut down and remove the AE card under the keyboard. See if it starts. If it does your AE card is bad. If not, start in safe mode and go to System Preferences>Accounts>youraccount and disable all non Apple startup (LOgin) items by clicking on them and then the minus sign. Restart normally and see if it will start.
John

Windows 8.1 64bit. Webcam works with "Camera" app but not with Skype.

I've spent a few hours googling and trying out various things - all listed below. I give up - any ideas??? OS: Windows 8.1 64bitMemory: 32GBWebCam: Microsoft VX-7000. As per subject - the webcam works with the "Camera" app but not with Skype for desktop or for Modern UI (or the Microsoft Lifecam software for that matter). Already attempted: 1) Uninstall webcam drivers - download latest from microsoft (Windows 7) and install in Windows 7 compatibility mode.2) Close (from taskmgr) anything that looks like it might use Webcam. 3) Run Skype for Desktop in Windows 7 and 8 compatibility modes None of the above work. In Skype for Modern UI the webcam doesn't appear in the drop down in Settings - so I can't even select it. In Skype for desktops (version 6.11.32.102) the webcam is found but instead of image I get "Can't start video. Try closing other programs that might be using your webcam". I see from a bit of googling that various people seem to have the same issue (i.e. Webcam works with Camera app but not Skype) - so I'm hopeful someone has found a workaround / fix to this issue and I've just not had the googling skills to find it Thanks, - Matt Symes

OK - I appear to have resolved the issue. I restricted my google terms to [vx-7000 site:microsoft.com "windows 8.1"] Which uncovered this article: http://support.microsoft.com/kb/933311 I noticed there were a couple of Windows 7 x64 specific registry settings that were mentioned so I checked these and they weren't as per the article. In fact - one of the Registry Keys was already used by other software "AI Charger+" which is some ValueAdd software that came with my motherboard. I uninstalled AI Charger+, uninstalled LifeCam driver. Reinstalled LifeCam driver in Windows 7 compatibility mode. Still not working. I returned to the registry and noticed the settings still differed from the above article. I corrected them (which involved not just amending Data but having to add new Values). I then disabled and reenabled the LifeCam from dvcmgmt.msc I was then able to get video from the webcam in the Skype for Desktop preview screen.

BSP is working as a URL but not as a BSP iView

Similar Messages

Maybe you are looking for