BSP - Webdocuments

Webdocument is a BSP,which is used to retrieve data from
SAP - DMS(Document Management System) which comes under
SAP - PLM(Product Lifecycle Management).
Can anyone Help me out in how to call & activate the webdocuments.
Awaiting your replies.
Regards,
Wesley.

Hi John,
ipconfig /displaydns is a MS-DOS command. It is not that you have to do that in a server machine.
You can do it from your local machine.
You can logon to any sap system only through SAPLOGON GUI. Right!
For connecting to a sap system you need its IP address or Host Name.
You have no problem in connecting to SAP System, Right!
According to your reply I can understand the your SAP System IP Address is 172.16.184.209.
What's the problem in your system is that your domain name and ip address are not mapped. i.e. Any BSP application
communicates to the SAP System through its fully qualified domain name. So it is mandatory to map the
domain name and ip address.
I can see that your fully qualified domain name is hstecd.corp.wipro.ad
(host name is part of this fully qualified domain name)
and your ip address for that domain name is
172.16.184.209
I think you donot have an entry in the host file that i have mentioned in the previous reply.
If you have administration access to your system you should be able to change the host file.
Just append this line...
172.16.184.209<press tab>hstecd.corp.wipro.ad
to the host file that is present in the path
<Drive>:\WINDOWS\system32\drivers\etc
Now you should be able ping through the domain name.
Without this entry in the host file you cannot ping to the domain name.
Yes, I am working in Cognizant Technology Solutions India Pvt.Ltd.,
Thanks & Regards,
Maheswaran.B
Message was edited by: Maheswaran B

Similar Messages

BSP - WebDocuments - Error?

I am using webdocuments and Easy DMS as my browser.In the stack i am able to see the documents which i created & viewed through Easy DMS.But when i tried to open the documents it displaying that documents doesn't exist!
Also when i tried to create a new document in WebDocuments it only allows me to create a Demo documents?
All the Webdocuments screen appears exactly...even the search is working properly...but unable to open any documents???
Kindly guide me what should be done!
Regards,
John.

Yes and no.
The ICM framework does not require it - the BSP runtime does.
So if you want to use BSP you must have fully qualified hostname. On the other hand you can build your own HTTP handler classes and they will not need it.
Cheers
Graham Robbo

WebDocuments: Cannot open original files

Hello,
We are testing WebDocuments - BSP,which is used to retrieve data from SAP - DMS(Document Management System).
When we try to open any original file in any one of the documents, we get exception. All other functions are working all right. Can anybody help me with this problem?
Thanks in advance,
Sergey

Hi Ali,
Thanks for your answer, it helped us a lot. We solved the problem with original files - it was content server error. Now we are trying to implement WebDocuments in another SAP system and got error message when starting WebDocuments:
Business Server Page (BSP) error
What happened?
Calling the BSP page was terminated due to an error.
SAP Note
The following error text was processed in the system:
Exception Class CX_FQDN
Error Name
Program CX_FQDN=======================CP
Include CX_FQDN=======================CM002
ABAP Class CX_FQDN
Analyze CHECK
Line 10
Long text -
Error type: Exception
Your SAP Business Server Pages Team
Do you know what does it mean? We made exactly the same actions as in the first SAP system, so what can be the problem?
Thanks a lot,
Sergey

How can I open a PDF stored in IXOS and then display it in a BSP

Hello gurus,
I have created a PDF icon and an onclick action to open a pdf, that displays on every row of an assignment block in the actions column, but I do not know the technical process to determine how to get a PDF from the IXOS system from the line selected. (even if I know it depends on an ID attribute of that assignment block) I want to to call a transaction launcher with the url for the pdf in the IXOS that has an ID that identifies which line in the assignment block the user has clicked the pdf icon for (does that make sense?)
Therefore, I am assuming the PDF should correspond to the relance ID of the row in the assignment block, but I would like more information as per the business logic involved in able to achieve the desired results for this particular specification. I already confirmed that the XURL or any other attribute in the BOL object does not contain the URL to use for this. I have looked at the class I was told that it may contain the required business logic for determining which PDF in IXOS to fetch for a particular row, and I am currently trying to reverse engineer the logic through looking at other code and using the debugger, but so far I haven'T had much luck.
Here are some questions I have now for the functional side in the meantime:
1) Can we fetch the PDF in IXOS for each line of an assignment block?
2) Which URL should I call with the transaction launcher? a URL link to the PDF on the IXOS system??
3) Do we have to configure a transaction in the IMG to be launched?
4) Do we have to create a logical link there that I will make dynamic to call the right PDF for each table line?
5) Are there any existing examples of this or a similar functionality/ logic that I could refer to, preferably in CRM 7 WebUI?
6) Do you have any code to just display a PDF in a new window? Or prompt a download?
One possible way I thought of would be for me to have a logical link defined in the IMG, that I could call passing it different attributes (eg. some object id, etc) and then return the PDF and display it in the UI in a new browser window by itself. Alternatively, we can just prompt a download. What do you think would be the optimal behaviour here?
Please do not hesitate to propose any potential solution. Any partial answers/ links to wikis/ other threads, anything would be much appreciated.
Thank you in advance.
Best regards,
Jonathan Laplante

Hi,
I partially answered your question in another posting but I feel that you´re in the wrong forum for your problem. This is for BSP development and you talk about CRM.

Any ideas on a nice BSP view pretty printer?

Hi there,
I am wondering whether somebody already tried to extend the SAP standard pretty printer by an own functionality which fits better for pages with mixed content, containing not only BSP-elements but also HTML-tags.
The standard pretty printer considers everything as plain text which is not a BSP-element and leaves it unaltered. Only BSP-elements are arranged according to their tree structure.
This produces ugly results for pages with mixed content.
1.) Requirement
A Pretty Printer for HTML-based BSP views should cover the following:
(a) HTML-Tags and BSP-elements together form the chain. As in following example:
<z:table table_id="testTab" binding="//test/gt_test" rows="5">
<z:tableBody position="top">
 <colgroup>
 <col width="4%">
 <col width="96%">
 </colgroup>
</z:tableBody>
<z:column name="type" header="<%=zcl_bsp_util=>dtel_text_s('EDI_TTYP')%>"
 listPos="10"/>
<z:column name="text" listPos="20"></z:column>
</z:table>
(b) Certain HTML formatting tags like I, B, etc. should not be added to the stack but be treated inline.
(c) HTML-attribute names should be converted to lower case, the attribute values should be quoted.
(d) Like for BSP-elements, there should be a threshold after which the attributes should appear in separate lines. Instead of a certain maximum "number of attributes", this could also be a maximum number of characters per line.
(e) Scripting Tags (<% ... %>) should start at a new line, if the content contains new-lines.
(f) Evaluation Scripting (<%= ... %>) should be inline, if they are contained within text nodes (and not within HTML oder BSP element nodes).
(g) The Pretty Printer should be parametrizable (with parameters like indent-depth,... ).
2.) Exits?
Of course, one could always use an external HTML editor and write an add-on for that editor which produces the desired result. Or one could take the view content into the clipboard, paste it into a plain text editor like UltraEdit or TextPad which allows external commands, apply an external, self-written pretty printer to it and then paste the result back into the View. But it would be easier to use the "Pretty Printer" button directly to get the result. Therefore the question arises at which point the standard Pretty Printer Functionality could be modified or extended.
I didn't find an exit. But the pretty-print itself is doubly-decoupled in the standard which minimizes the number of points where an extension has to be made:
2.a) First decoupling point: The Fcode handler method pretty_printer_ext( ) in cl_o2_page is calling
dynamically a method in cl_o2_co2_processor:
* call pretty printer
create object pp type ('CL_O2_CO2_PROCESSOR').
appl_str = me->pagekey-applname.
page_str = me->pagekey-pagekey.
try.
 CALL METHOD pp->('PRETTY_PRINT')
 EXPORTING
 indent = 2
 ATTRIBUTE_NORMALIZE = 'X'
 ATTRIBUTE_THRESHOLD = 2
 BSP_UNFORMATTED = source
 appl = appl_str
 page = page_str
 IMPORTING
 test_ok = test_ok
 BSP_FORMATTED = pp_source.
 catch cx_o2_co2_exception into o2ex.
2.b) Second decoupling point:
The method pretty_print() of class cl_o2_co2_processor (fancy names, by the way. It seems that many former chemistry students had joined the BSP team ),
there is a second delegation, to a local class, as follows:
data pretty type ref to LCL_BSP_PRETTY_PRINT.
pretty = LCL_BSP_PRETTY_PRINT=>getInstance( processor = me ).
The real logic for doing the Pretty Print, finally, is performed in this local class.
3.) Implementation.
Since, up to my knowledge, there is no HTML parser in the ABAP world,
the implementation could be based on existing HTML Parsers, like the Perl module Parser::HTML, or the Java package http://htmlparser.sourceforge.net/ . The pretty printer could then be called as external OS command.
Are there any ideas out there? Or is there somebody who already worked in this direction?
Regards,
Rüdiger

For those who are interested. I found out that the Dave Ragget's classic "HTML Tidy" (see <a href="http://tidy.sourceforge.net/">http://tidy.sourceforge.net/</a> ) is available in ABAP! There is a class CL_HTMLTIDY (at least here in my SAP_BASIS 700 system) which wraps calls of HTML Tidy by kernel modules.
The class is undocumented, but there are 2 OSS notes of this year for it, so it might well be that it is alive.
HTML Tidy can surely not directly be used for Pretty Printing BSP views, but for designing test cases or for doing things like HTML parsing, it might be a helpful tool.

Error in using PERFORM in eventhandler in a BSP Application.

Hi All,
Can we use Subroutines in BSP applications?
If yes then please help me with syntax .
Best Regards,
Anubhav.
Edited by: Anubhav Jain on Dec 20, 2007 10:52 PM

You can call subroutine with below Synatx:
DATA: progname(20) TYPE C VALUE 'YTESTINCLUDE' .
PERFORM your_perform_name IN PROGRAM (progname) IF FOUND.
"where your_perform_name is the form within the include program YTESTINCLUDE[/code]
Raja T
Edited by: Raja Thangamani on Dec 20, 2007 4:58 PM

Problem with index of numbers in BSP Front end

Hello All,
I am facing the below problem. Request your help.
Scenario: When I am trying to add the projects in the Front end , I am facing the problem with the index of numbering of the projects.
Example: If I am adding 6 projects ( at the max only 4 on each page i-e there are 2 pages ), then the index is wrongly numbered and the arrow (for direction of the pages) are wrongly displayed. The direction of the arrow is pointed to the next page rather pointing to the previous page and the index of numbering of the pages is wrong.
Request you to please suggest if this is any code fault in the table maintainance activity in the backend (BSP).

Hi Irina,
If you mean the number range is skipping 10 numbers in between runs then its because of the buffering in the number range.
To avoid the buffer influencing the number range, pass
'X' to the function module parameter: IGNORE_BUFFER.
This should resolve the problem.
Cheers,
Aditya

BSP Error while selecting "campaign elements" in spanish --- crm 2007

Hi experts,
I´m trying to look for a solution for a problem with an error that occours while selecting in WEB UI --marketing --- campaign elements , in spanish language.
Error Business Server Page (BSP)
<thtmlb:textView>: (design) The Attribute Value is not a Value from: STANDARD/HEADER1/HEADER2/LABEL/VALUE/ITALIC/BOLD
In english it works perfect.

Which field is? Has translate value content to spanish for this field?.
In SAP CRM UI, press F2 and tell me which is the field

Badi/exit/Workflow called during execution of the BSP "SRMSUS_SELFREG"

Hi all,
We are running on SRM 5.0.(SP06) Strategic sourcing scenario.We are using enterprise Portal as the front end.My query is that at the end of Supplier registration process,when the Supplier admin creates the USER ID's for the Suppliers(through BSP SRMSUS_SELFREG),is there any way by which we can create the enterprise Portal users for those suppliers at the same time(Automation) ?My BASIS person told me that the automation is possible when the EP system is connected only to 1 backend but in our landscape we are having several systems connected to EP.
Other alternative would be to send a mail to the EP administrator stating that the Vendors User ID's have been created in SRM and the EP ID's need to be created.
For this ,i didnt get any BADi/exit which gets triggered during this USER ID creation process wherein i can write my logic for sending the mail to the EP admin.
There are some Std workflows (e.g. WS10000209)for USER creation but these dont seem to be useful in this scenario.
So the only method left is to modify the Std BSP which we dont want.Has anybody worked on this kind of scenario?
Any suggestions are welcome and will be rewarded as well.
BR,
Disha.

Hi
I am still searching.. but no BADI/Exit is called in this case..
Meanwhile, i found few SAP OSS notes, which you can go through ->
Note 1031896 Delimiting of Supplier Reg URL due to Special characters
Note 1031070 Supplier cannot be registered
Note 996030 Need to relogin to srmsus_selfreg service when using aliases
Note 1032573 FormofAddr field mandatory in userselfreg.htm page
Note 1003820 Supplier cannot be registered
Note 889451 Not Possible to register in Supplier self-registration
Note 807511 Error message after self registration of supplier admin user
Note 784883 Irrelevant warning message stops self registration
Do let me know.
Regards
- Atul

Xcelsius Dashboard on SAP R/3 Table using BSP and XML Mapping

Hi Experts,
I have developed a simple dashboard on small data set (10 records) that I am fetching from a R/3 Table into BSP and generating XML from there and consuming it in Xcelsius (SAP R/3 + BSP + XML Mapping).
Now I want to fetch data based on Variables values that should be passed from the dashboard at the runtime and should display the data accordingly. Any help on how it can be achieved?
Thanks..!!
Sharad

Hi,
You could try doing this by using XML data connection. You would have to make use of Enable load to get the data from XML and Enable send to send data back to XML from dashboard.
This would require you to write a script.
Thanks,
Amit

Unable to capture the Idle time for BSP page

Hi Experts,
I want to capture the Idle time of my BSP page. If that is 5 mins then i have to display the pop up displaying the remaining time.
Please let me know how to capture the IDLE TIME. not the time after the page is loaded.
Any suggestion will be helpful.
Aready checked in SDN but unable to get the solution so posting it.
Thanks in advance.
Sravanthi.V

hi,
After capturing the idle time iam giving the warning popup to user before 5mins of expiry.Now my requirement is if the user clicks on OK button of popup the page should get refresh. i.e.Idle time should of system should break and we have to get one more hour for expiry.
Thanks in advance,
Sravanthi.V

Field value on BSP Page

Hi,
I have a requirement to show previous entered values in an input field on BSP Page. for example suppose I enter value '0998' in an input field say 'XYZ' and then I close or refresh the browser. again i open the page in browser and click the input field then system should suggest me the previous entered value i.e. '0998'. does anyone have idea how we can do it?
Regards
Amit kumar
Edited by: amitku1201 on Jan 8, 2010 12:19 PM

Hi Amit,
I saw your code..
<htmlb:form id="Form1" method="POST" autoComplete = "TRUE">
<bsp:findAndReplace find = "ON" replace = "ON">
In the link I provided
<bsp findAndReplace find = "off" replace = "on">
I dont see the closing tag
</bsp:findAndReplace>
anywhere in your code.
The tag should be not used immediately after the FORM tag instaed it is used just before the tag for particular element.
Like in your case if you want to used it for the inputfield i_case , it should be done as
<bsp findAndReplace find = "off" replace = "on">
<htmlb:inputField id="i_case" value="<%=i_case%>" type="string" maxlength="12" width="100"/>
</bsp:findAndReplace>
The inputfield tag will be used between find and replace tags.
I hope this will help you solve the issue.
Regards,
Anubhav

Assign a value from dropdownlist to input field value on BSP page

Hi,
I'm new to SAP and ABAP. We have a CRM project in which I have to maintain BSP pages.
Now, coming to my problem: I have a input field with
value = "//BTAdminH/HeaderInfo"
This field is normally maintainable. The required function is now to set this field as not maintainable/readonly. Then, the value should be set automatically to an value, which will be selected from a dropdownListBox. After saving, the value HeaderInfo should have the same value like the selected value from the dropdownListBox.
How can I now set the field as readonly (this should be the easier part) and
how can I set the value for the HeaderInfo to the value of the selected value from the dropdownListBox?
If I set it directly like this
value = "//BTActivity/Priority"
it is shown on the BSP page correclty, but it is not saved as HeaderInfo.
Please help me.
Enja

Hello Gokul,
test was only for test purposes! I am using as a separator the plus sign!
But this is not the problem!
In debugging, the local variable has the concatenated value! So, this is working!
oncatenate ls_ddlb1-value ls_ddlb2-value ls_ddlb3-value into lv_headerinfo SEPARATED BY ' + '.
But when I assign the value of my set_headerinfo to the local variable, then it is returning only the separator sign!!!
if BTAdminH->GET_HEADERINFO( 'HEADERINFO' ) is initial.
BTAdminH->SET_HEADERINFO( attribute_path = 'HEADERINFO' value = lv_headerinfo ).
endif.
If I declare the local variable as one of the dropdown values, then it is getting populated also for set_headerinfo
lv_headerinfo =ls_ddlb1-value.
So, the assigning is also working! But it is not working, when the local variable equals more than one value! I hope that I could explained it in the right way for you!!!!
So. why is the value for set_headerinfo not the same as the one for the local variable! The local variable has the correct value after the concatination.
Regards
Enja

Capture Browse Event in BSP application

Hi guys,
i have a BSP page which contains a browse button and a drop downlist. my requirement is to enable a button only when the value is selected from the dropdown list and the text field of the browse event is filled.
the problem is that am able to capture the selection from teh dropdown list however am not able to determine whether the browse button was clicked and hence a file name been selected.
i wanted to know if there is any kind of event which is trigger when the browse button is presse in the page.
thanking you for your aids.
fardeen.

I found a piece of code whereby the author insert an Event name(OnInputProceesing) in one of the onaction event.
I have not tried it yet, but will do it in the near future
Since i got no replies here, i'l close the thread.

Error message in bsp application

hi
Im tamil selvan .....this is my first bsp application i created .. but i cant view the output..the default html code itself not executing... i copied the same code in text and saved in html its executing there... i dont know what is the issue..is any system files are missing...plz guide me im new to bsp....first what should i learn ... the below is the error i pasted...
Business Server Page (BSP) error
What happened?
Calling the BSP page was terminated due to an error.
SAP Note
The following error text was processed in the system:
Die URL enthält keine vollständige Domainangabe (isys-ecc statt isys-ecc.).
Exception Class CX_FQDN
Error Name
Program CX_FQDN=======================CP
Include CX_FQDN=======================CM002
ABAP Class CX_FQDN
Method CHECK
Line 10
Long text -
Error type: Exception
Your SAP Business Server Pages Team

Hi Tamil,
welcome to the SAP Community Network. You will find lots of great resources, tips, and examples here.
Of course to find them you have to look for them. You will find most people more than happy to help you with problems if you first try and help yourself by searching for the solution yourself.
So please, search the forums for the solution to your problem before you post.
Cheers
Graham Robbo

BSP - Webdocuments

Similar Messages

Maybe you are looking for