BT Broadband Line from exchange

BT is a total and abslolute joke I subscribed to BT services for over 9 years witthout a single improvment to my BB speed, I continualyy got the same old dreary excuse excuse  !  its your disctance form the exchange - well thats **bleep** - because my neigbours either sid e of me get 6Mps  - IM lucky if i get 2 on most days yet I pay more than any of my neigbours.. Its time the Government forced BT to provide a minimuk 8Mps spedd to the whole of the UK.  No wonder business to business activity in this Country is forcing us to lag behind in the world.
WHAT INCENTICE IS THER FOR BT TO INVEST IN UPGRADING YOU SPEE   LET ME TELL YOU  NONE !!! SO THEY SIT BACK AND ALLOW THE UK USERS TO SUFFER WIHT AN APPALLING SERVICE   SHAME ON THEM

Hi gbucks,
Sorry to hear that your having problems with your BT Broadband
You will either be on the ADSLMax (upto 8mbps) service or if your exchange has been BTw 21cn upgraded you maybe on the ADSL2/2+ (upto 12/20mbps) service depending on your line quality and length.
However these upto speeds may not be the speeds you will get as ADSL broadband connections are very dependent on the distance from your property to the exchange and the quality of your line. The further away you are from your local exchange the slower your broadband speed will be.
To enable the community to help you please see the advice below:
Please see Keith's help guide here: Helping forum members to help you, it will go through some checks that are needed for us to help you.
A summary of the checks are:
1a) Is your router/Homehub connected by a BT NTE5 master socket, Adsl Filtered Master Socket or Extension Socket?   Please bear in mind that extension cables and extension sockets can reduce the broadband's performance. If you have an Old LJU master socket then please say.
1b) Have you tried the Test Socket? - if you have one.
2) Can you please run a BT speed test (including IP Profile) http://speedtest.btwholesale.com (not beta version)[Best done with a wired, Ethernet, connection] After Quick Test is done you need to click "Further Diagnostics" to get IP Profile.
3) is there any noise on your line. dial 17070 option2 ,called quite line test, from landline phone. should be silent but slight hum normal on cordless phone.
4) please post adsl line statistics 
ADSL Line Statistic Help:
 If you have a BT Home Hub like the one below...
 Then:
 1) Go to http://192.168.1.254 or http://bthomehub.home
 2) click Settings
 3) Click Advanced Settings
 4) Click Broadband
 5) Click Connection or sometimes called ADSL (see picture Below)
The direct Address is http://bthomehub.home/index.cgi?active_page=9116 (for bthomehub3.A firmware ending in 1.3)
or http://bthomehub.home/index.cgi?active_page=9118 (for bthomehub3.A firmware ending in 94.1.11)
You will need to copy and past all the adsl line statistics ( Including HEC, CRC and FEC errors). You may need to click " More Details"
There are more useful links on Keith's website here: If you have an ADSL connection, please select this link
Don't have a BT Homehub/Voyager?
• http://192.168.0.1 for a netgear router and look for ADSL adsl statistics with information like noise margin and line attenuation, connection speed
• http://192.168.2.1 for a belkin router and look for ADSL adsl statistics with information like noise margin and line attenuation, Data Rate
 cheers
I'm no expert, so please correct me if I'm wrong

Similar Messages

  • Please arrange BT to increase my broadband line ba...

    Hi
    A few months back I had a lot of broadband problems and my connection would keep dropping out etc frequently.
    I`m on BT`s ADSL2 service and have a connection sync rate speed of about 4900kbps but the exchange (DLM) has heavily
    capped my line banding+sync rate+line profile down so I can`t get anymore than 2.5MB and my line won`t sync any
    higher than 3072kbps.
    I was wondering if one of the forum mods would be able to arrange BT to increase my broadband line banding a little bit
    more so I can get a bit more of my line sync rate back? because despite my previous problems are now gone and my connection
    has been stable for months now, my line speed hasn`t returned.
    Thanks for the response and help.
    Sylver123.

    it sounds like all your disconnections/resets have resulted in your line being put in a banded profile until it stabilises.  can you post the adsl stats from your router may need to 'show detail' to get all stats (if hub enter 192.168.1.254 in your browser and navigate to adsl or use a-z, if netgear enter 192.168.0.1) and run btspeedtester http://speedtester.bt.com and post the results.
    are you connected to the master or test socket or somewhere else
    do the quiet line test   dial 17070 option 2  should hear nothing   best done with a corded phone
    Someone may then be able to offer assistance
    If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
    If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

  • We live 235 meters from exchange and have been tol...

    we live 235 meters from exchange and have been told 2meg is the most we can have ..hummm..
    sorry to the chap that just called us , but i dont believe your words .
    the intermittent connection problem seams to have been solved after a long visit from the open reach engineer last Friday . Thank you to that chap ! .
    i understand that it can take several days to allow our broadband connection to settle , as stated by the best engineer to date of last friday .
    he explained what he had found and corrected the problem wonderfull  
    when you pay top price for unlimited service you expect to get the service you want , not to be told you will be caped at just over 2meg .
    upon checking the approx speed available via the BT line speed checker i think the chap that just told me what we can have needs to check the facts first before calling .
    our line can take over 10+ meg as we have had in the past before we had this stability problem now  that problem has been solved why do we have to put up with only 2meg ?? .
    i bet if we only payed an eigth of our monthly bill you  i.e BT would be very quick to approach the matter .
    so please someone explain why .
    thanks ..
    sunnydorset .
    Solved!
    Go to Solution.

    hi there , thanks for your reply . here are the current adsl stats .
    VPI/VCI
    0/38
    Type
    PPPoA
    Modulation
    ITU-T G.992.5
    Latency type
    Interleaved
    Noise margin (Down/Up)
    26.4 dB / 5.8 dB
    Line attenuation (Down/Up)
    14.5 dB / 6.6 dB
    Output power (Down/Up)
    0.0 dBm / 12.3 dBm
    Loss of Framing (Local)
    21
    Loss of Signal (Local)
    2
    Loss of Power (Local)
    0
    FEC Errors (Down/Up)
    56 / 4294967264
    CRC Errors (Down/Up)
    0 / 2147480000
    HEC Errors (Down/Up)
    nil / 0
    Error Seconds (Local)
    2
    Line state
    Connected
    Connection time
    2 days, 20:18:21
    Downstream
    2,268 Kbps
    Upstream
    1,212 Kbps

  • ADSL2+ Broadband Line Speed

    I have just renewed my 12 month home BT Total Broadband contract again (contract started Monday 14th March), and have always been very pleased with the reliability and quality of my (up to 8Mbps) actual download speed of around 4 to 5Mbps. 
    This time I was told I would have an (up to 20Mbps) actual download speed of around 14Mbps, which I verified using the BT Wholesale Broadband Availability Checker (ADSL2+ broadband line speed of 14Mbps, typically the line speed would range between 8Mbps and 18.5Mbps).
    However, my line is now still yielding around 5Mbps, but I am aware of the 10 day, MSR, IP Profile BRAS, DLM, etc issues.    The bt.com speedtester has just yielded the following Test 1 results:
    Download speed achieved during the test was 5281Kbps.
    For your connection, acceptable range of speeds is 2000 - 7150 Kbps.
    DSL Connection Rates of 7275Kbps Downstream and 888 Kbps Upstream
    IP Profile for your line is 5500 Kbps
    My point is : Surely the above Test 1acceptable range of speeds of 2000 - 7150Kbps, should now  be xxxx - 14000Kbps or higher, as ADSL2+ has a maximum speed of 20000Kbps and my line will support the 14000Kbps ?

    New upgrade ADSL2+ service started 14th March 2011.
    BT Home Hub Manager.
    ADSL Line Status            16th March                        17th March
    Connection Time              14 hrs                                   2 hrs                            
    Downstream                      7,275 Kbps                         283 Kbps
    Upstream                            888 Kbps                            440 Kbps
    VPI/VCI                                0/38                                      0/38
    Type                                     PPPoA                                 PPPoA
    Modulation                         ITU-T G992.5                      ITU-T G.992.5
    Latency type                      Interleaved                          Interleaved
    Noise Margin Dn/Up        7.8 / 13.7 dB                       15.8 / 29.4 dB
    Line Attenuation Dn/Up   31 / 16.4 dB                        31 / 16.3 dB
    Output Power Dn/Up        0.0 / 12.6 dB                       0.0 / 12.5 dB
    Loss of Framing Local      0                                          11
    Loss of Signal Local         0                                          1                
    Loss of Power Local         0                                          0
    FEC Errors Dn/Up             134820 / 4294967150     7327 / 0
    CRC Errors Dn/Up            221 / 2147480000            0 / 2147480000
    HEC Errors Dn/Up             nil / 0                                   nil / 0
    Error Seconds Local        116                                     145
    Speedtester.bt.com  17th March  2pm.
    Download Speed achieved during test    175 Kbps
    Maximum Achievable Down Speed         7150 Kbps
    Acceptable range of speeds                      2000 to 7150 Kbps
    DSL Connection Rate Down Stream       283 Kbps
    DSL Connection Rate Up Stream             440 Kbps
    IP Profile for line                                           5500 Kbps
    Throughput of Best Efforts in Test             25.07:32.47:42.74
    Up Stream Test  Upload Speed                341 Kbps
    Maximum Achievable Upstream Speed   440 Kbps
    Up Stream Rate IP Profile for line              440 Kbps
    This article from the Internet helped me to get my brain (what's left of it) round this problem. I hope it helps others too.
    During the first ten days after the Broadband service has been provided, the line's performance is monitored, and the lowest connection speed is noted. This figure is used from then on to define minimum service standards below which the service can be considered to have a fault. Both during this period and afterwards, a system known as Dynamic Line Management (DLM) constantly assesses the performance of the line in order to provide information to the end user's DSL Modem/Router to allow it to choose a suitable sync rate, with which to connect to the Telephone Exchange Digital Subscriber Line Access Multiplexer (DSLAM), balancing speed against the risk of errors due to changing noise conditions. DLM can make adjustments to the DSLAM output power, suggested target signal-to-noise-ratio, and sync rate, and can choose to apply a technique known as interleaving, which aids error correction. Several factors dictate the sync rate, which limits the maximum attainable line speed, such as the presence of noise within the frequency spectrum used by ASDSL, but mainly it is the distance from the Telephone Exchange to the Subsriber, which has the largest influence on the line' performance.
    Questions.
    Why are my Broadband Internet speeds now slower than the old Dial-Up service ?
    Why is my Download Speed now lower than my Upload Speed ?
    Why have my Down / Up Noise Margins doubled overnight ?
    Why is the DLM system now assessing my line as so bad, after years of quality 5000 Kbps Broadband Speed ?
    Why does the achievable speed top at 7150 Kbps, when ADSL2+ works up to 20000 Kbps, 14000 Kbps on my line ?

  • Infinity direct from Exchange

    Hi
    My exchange Brundall EABRU has recently gone live on FTTC but I still cannot order Infinity.
    I noticed in the Infinity FAQ that you sometimes cannot get Infinity if your line comes directly from the exchange and fear I fall into that category as my house is 400m from the exchange.
    What if anything does BT plan to do to get Infinity or a high speed equivalent to properties fed direct from exchanges.
    I saw a mention of something quicker than ADSL 2+ in one posting but can't find it.

    At the moment Exchange Only (EO) lines can only support Adsl Broadband (ie ADSLMax which is upto 8mbps or ADSL2+ which is upto 20mb) unless your exchange is FTTP/H ready (Fibre to the Premises/Home)
    Unfortunatly most EO lines are currently unable to have fibre broadband such as BT Infinity (FTTC Version) due to your line not connecting to a cabinet which would allow FTTC.
    Also BT Retail (a communication provider/ISP who operates this forum) does not have much say as to when and if you will be able to get FTTC or FTTP/H based broadband such as BT Infinity.
    The rollout of fibre broadband (FTTC or FTTP/H) is being planned, managed and done by Openreach for all communication provider/ISP. BT Retail (a communication provider/ISP) has nothing to do with the rollout and planning of fibre broadband.
    Openreach plan to upgrade EO lines in the future to allow access to Fibre based broadband
    Please bear in mind that in some cases it may not be possible to provide FTTC broadband in areas due to: 
    • Your phone line may be connected directly to the telephone exchange and not to a local street cabinet - (Exchange Only Line [EO] )
    • Your line may be too far from the local street cabinet to have a stable FTTC broadband service such as BT Infinity service.
    • Your local street cabinet may not be suitable for fibre optic cables.
    • We haven't yet got the council's planning permission to do the necessary work at your local street cabinet.
    • Your home may not be suitable for fibre optic cables.
    • Your landlord may not have agreed to the fibre infrastructure being provided in your building (for example if you live in a flat).
    There are different stages to the development of the fibre infrastructure in the UK.
    If you have an EO Line then currently you will not be able to have FTTC broadband as your line isn't connected to a cabinet. In these instances Openreach plan to connect some areas that have EO lines with either FTTP or other fibre technologies in the future.
    This video explains more: http://www.youtube.com/watch?feature=player_embedded&v=p0qN5XHuI5Q
    Also check the Openreach "Power of Fibre" website: http://www.superfast-openreach.co.uk/the-big-build/the-power-of-fibre.aspx
    You can keep checking the BT Wholesale Database and BT Infinity website for upto date information as these are updated regularly.
    The openreach When and Where website is: http://www.superfast-openreach.co.uk/where-and-when/
    **The Fibre-Optic Broadband Rollout is being managed and done by Openreach for all communication providers/ISPs.
    BT Retail (your communication provider/ISP) has nothing to do with the rollout of fibre broadband.**
    Hope that helps.
    Cheers.
    jac_95 | BT.com Help Site | BT Service Status
    Someone Solved Your Question?
    Please let other members know by clicking on ’Mark as Accepted Solution’
    Try a Search
    See if someone in the community had the same problem and how they got it resolved.

  • Help With Migration From Exchange 2007 To Exchange 2013

    We have an Exchange 2007 Server with Service Pack 3 and Rollup 12 applied. 
    I installed a new Exchange 2013 Server and then immediately applied CU3.
    I am following this Technet article:
    http://blogs.technet.com/b/meamcs/archive/2013/07/25/part-1-step-by-step-exchange-2007-to-2013-migration.aspx
    The only deviation from the instruction I have had to do is in Part 2, section 4 “Configure offline address book (OAB)”. 
    Instead of entering:
    Get-MailboxDatabase | Set-MailboxDatabase -OfflineAddressBook "\Default Offline Address Book (Ex2013)"
    I had to enter:
    Get-MailboxDatabase | Set-MailboxDatabase -OfflineAddressBook "\Default Offline Address Book (Ex2012)"
    I believe this is due to the fact that the writer installed from an Exchange 2013 CU1 disk and I only had Exchange 2013.
    Also when I tried to run:
    Move-OfflineAddressBook -Identity "Default Offline Address Book" -Server SRV-EX2013
    I get the following error:
    Move-OfflineAddressBook : Failed to create the 'ExchangeOAB' folder on the target server 'SRV-EX2013'. Two possible reasons for the failure are that the System Attendant Service is not running or you do not have permission to perform
    this operation. Error message : 'Catastrophic failure (Exception from RESULT: 0x8000FFFF (E_UNEXPECTED))'.At line:1 char:24+ Move-OfflineAddressBook <<<< 
    -Identity "Default Offline Address Book" -Server SRV-ex2013+ CategoryInfo         
    : InvalidResult: (Default Offline Address Book:OfflineAddressBookIdParameter) [Move-OfflineAddressBook], LocalizedException  
    + FullyQualifiedErrorId : 9250969C,Microsoft.Exchange.Management.SystemConfigurationTasks.MoveOfflineAddressBook
    However when I looked at the address books in EAC I could see that “Default Offline Address Book (Ex2012)” was the default and that it contained a copy of the Global Address List. So I did nothing else about it.
    I am now at Part 3, section 7 “Move Mailboxes” and it keeps failing. 
    I am using the EAC so that I at least see the error as using the powershell brings back no results. 
    Anyway it Syncs the 18 items in the mailbox then fails with:
    Data migrated: 936.7 KB ‎(959,145 bytes)‎
    Migration rate: 0 B ‎(0 bytes)‎
    Error: MigrationPermanentException: Error: An error occurred while updating a user object after the move operation. --> Unable to generate the e-mail address. Unable to load address module ‎'C:\Program Files\Microsoft\Exchange Server\V15\Mailbox\address\SMTP\AMD64\inproxy.dll‎'
    for address type ‎'SMTP‎'. Additional message: ‎'Access is denied‎'.
    Help??
    Tony

    Hi,
    You can't configure Exchange 2013 to generate other OAB versions, and the OAB generation occurs on the Mailbox server on which the organization mailbox resides.Therefore, to move OAB generation in Exchange 2013, you must move the organization mailbox. You
    can only move the OAB generation to another Exchange 2013 mailbox database. You can’t move OAB generation to a previous version of Exchange.
    And please refer to the following articles :
    Moving OABs between Exchange versions
    If you want to upgrade from exchange 2007 to exchange 2013,I recommend you refer to the following article:
    Upgrade from Exchange 2007 to Exchange 2013
    Exchange   version
    Exchange   organization coexistence
    Exchange 2007
    Supported with the following   versions of Exchange:
    Update Rollup 10 for Exchange        2007 Service Pack 3 (SP3) on all Exchange 2007 servers in the       
    organization, including Edge Transport servers.  
    Exchange 2013 Cumulative        Update 2 (CU2) or later on all Exchange 2013 servers in the       
    organization.
    Install Exchange 2013 in an Existing Exchange 2007 Organization
    You can install a Microsoft Exchange Server 2013 server into an existing Exchange Server 2007 organization, and then move the Exchange resources, such as mailboxes, public folders, and connectors, to Exchange 2013. However, you can't perform an in-place
    upgrade from Exchange 2007 to Exchange 2013.
    Hope this helps!
    Thanks.
    Niko Cheng
    TechNet Community Support

  • Mailbox Move from Exchange 2007 to Exchange 2013

    I was surpprised to see that when I move mailboxes from exchange 2007 to Exchange 2013, that the mailbox being moved does not get disconnected during the move process (client Outlook connection). That is great news but supprising to me. I know
    moving from 2010 - 2013 or 2013 - 2013 is a background process. Did something change with this recently or has it always been this way? Does the mailbox move flag inside the mailbox just jet ignored?
    Thanks

    When you do a mailbox move it stays connected during the initial sync.  Once the initial sync is performed, there is another phase where it completes the mailbox move (basically updates some AD attributes) when this piece happens users will not be able
    to access their mailboxes.
    You can control this behavior by setting the SuspendWhenReadyToComplete
    switch either by command line when creating the move request via the EMS
    https://technet.microsoft.com/en-us/library/dd351123%28v=exchg.150%29.aspx?f=255&MSPPError=-2147217396
    Or if you are doing this via the the EAC select "Manually Complete the batch" option before starting the move.
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread

  • Upgrading from Exchange 2007 SP2 to SP3 stops and fails with Performance Counter

    We are upgrading from Exchange 2007 SP2 to SP3.
    Exchange Server is on Windows 2008 Enterprise 64 bit OS -SP2
    DC is on windows 2008 Enterprise 32 bit OS - SP2
    When we run Exchange SP3 setup.exe GUI, it runs through the pre-requisites completely and then starts to configure the Hub Transport services but @ exactly 55% it throws an error window "Exchange Server Setup encountered an error"
    On repeating this process i noticed it throws the same error at 55% while "Performance COunter Configuring". Please find below the entries of exchangesetup.log
    [2/1/2015 1:09:30 PM] [0] **********************************************
    [2/1/2015 1:09:30 PM] [0] Starting Microsoft Exchange 2007 Setup
    [2/1/2015 1:09:30 PM] [0] **********************************************
    [2/1/2015 1:09:30 PM] [0] Operating System version: Microsoft Windows NT 6.0.6002 Service Pack 2.
    [2/1/2015 1:09:30 PM] [0] Setup version: 8.3.83.6.
    [2/1/2015 1:09:30 PM] [0] Logged on user: chakfig\Administrator.
    [2/1/2015 1:09:30 PM] [0] Command Line Parameter Name='mode', Value='Upgrade'.
    [2/1/2015 1:09:30 PM] [0] Command Line Parameter Name='sourcedir', Value='J:\EXSP01\SP3'.
    [2/1/2015 1:09:30 PM] [0] Command Line Parameter Name='fromsetup', Value=''.
    [2/1/2015 1:09:30 PM] [0] ExSetupUI was started with the following command: '-mode:upgrade -sourcedir:J:\EXSP01\SP3 /FromSetup'.
    [2/1/2015 1:09:30 PM] [0] Setup is choosing the domain controller to use
    [2/1/2015 1:09:31 PM] [0] Setup is choosing a local domain controller...
    [2/1/2015 1:09:35 PM] [0] Setup has chosen the local domain controller PGCDC.chakfig.local for initial queries
    [2/1/2015 1:09:35 PM] [0] PrepareAD has been run, and has replicated to this domain controller; so setup will use PGCDC.chakfig.local
    [2/1/2015 1:09:35 PM] [0] Setup is choosing a global catalog...
    [2/1/2015 1:09:35 PM] [0] Setup has chosen the global catalog server PGCDC.chakfig.local.
    [2/1/2015 1:09:35 PM] [0] Setup will use the domain controller 'PGCDC.chakfig.local'.
    [2/1/2015 1:09:35 PM] [0] Setup will use the global catalog 'PGCDC.chakfig.local'.
    [2/1/2015 1:09:35 PM] [0] Exchange configuration container for the organization is 'CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=chakfig,DC=local'.
    [2/1/2015 1:09:35 PM] [0] Exchange organization container for the organization is 'CN=chakfig,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=chakfig,DC=local'.
    [2/1/2015 1:09:35 PM] [0] Setup will search for an Exchange Server object for the local machine with name 'PGCVMEXG'.
    [2/1/2015 1:09:35 PM] [0] Exchange Server object found : 'CN=PGCVMEXG,CN=Servers,CN=Exchange Administrative Group (FYDIBOHF23SPDLT),CN=Administrative Groups,CN=chakfig,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=chakfig,DC=local'.
    [2/1/2015 1:09:35 PM] [0] The following roles are unpacked: BridgeheadRole ClientAccessRole MailboxRole AdminToolsRole 
    [2/1/2015 1:09:35 PM] [0] The following roles are installed: BridgeheadRole ClientAccessRole MailboxRole AdminToolsRole 
    [2/1/2015 1:09:35 PM] [0] The local server has some Exchange files installed.
    [2/1/2015 1:09:35 PM] [0] Setup will use the path 'J:\EXSP01\SP3' for installing Exchange.
    [2/1/2015 1:09:35 PM] [0] Setup will discover the installed roles from server object 'CN=PGCVMEXG,CN=Servers,CN=Exchange Administrative Group (FYDIBOHF23SPDLT),CN=Administrative Groups,CN=chakfig,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=chakfig,DC=local'.
    [2/1/2015 1:09:35 PM] [0] 'BridgeheadRole' is installed on the server object.
    [2/1/2015 1:09:35 PM] [0] 'ClientAccessRole' is installed on the server object.
    [2/1/2015 1:09:35 PM] [0] 'MailboxRole' is installed on the server object.
    [2/1/2015 1:09:35 PM] [0] The server is cluster type: 'None'.
    [2/1/2015 1:09:35 PM] [0] The requested cluster type: 'None'.
    [2/1/2015 1:09:35 PM] [0] The installation mode is set to: 'BuildToBuildUpgrade'.
    [2/1/2015 1:09:35 PM] [0] An Exchange organization with name 'chakfig' was found in this forest.
    [2/1/2015 1:09:35 PM] [0] Active Directory Initialization status : 'True'.
    [2/1/2015 1:09:35 PM] [0] Schema Update Required Status : 'False'.
    [2/1/2015 1:09:35 PM] [0] Organization Configuration Update Required Status : 'False'.
    [2/1/2015 1:09:35 PM] [0] Domain Configuration Update Required Status : 'False'.
    [2/1/2015 1:09:35 PM] [0] The locally installed version is 8.3.83.6.
    [2/1/2015 1:09:35 PM] [0] Exchange Installation Directory : 'C:\Program Files\Microsoft\Exchange Server'.
    [2/1/2015 1:09:35 PM] [0] The backup copy of the install path is 'C:\Program Files\Microsoft\Exchange Server'.
    [2/1/2015 1:09:35 PM] [0] The backup copy of the previously installed version is '8.2.176.2'.
    [2/1/2015 1:09:36 PM] [0] Setup is determining what organization-level operations to perform.
    [2/1/2015 1:09:36 PM] [0] Because the value was specified, setup is setting the argument OrganizationName to the value chakfig.
    [2/1/2015 1:09:36 PM] [0] The installed .msi file is current for this version of setup.
    [2/1/2015 1:09:36 PM] [0] RootDataHandler has 1 DataHandlers
    [2/1/2015 1:12:38 PM] [0] End of Setup
    [2/1/2015 1:12:38 PM] [0] **********************************************
    [2/1/2015 2:17:36 PM] [0] **********************************************
    [2/1/2015 2:17:36 PM] [0] Starting Microsoft Exchange 2007 Setup
    [2/1/2015 2:17:36 PM] [0] **********************************************
    [2/1/2015 2:17:36 PM] [0] Operating System version: Microsoft Windows NT 6.0.6002 Service Pack 2.
    [2/1/2015 2:17:36 PM] [0] Setup version: 8.3.83.6.
    [2/1/2015 2:17:36 PM] [0] Logged on user: chakfig\Administrator.
    [2/1/2015 2:17:37 PM] [0] Command Line Parameter Name='mode', Value='Upgrade'.
    [2/1/2015 2:17:37 PM] [0] Command Line Parameter Name='sourcedir', Value='J:\EXSP01\SP3'.
    [2/1/2015 2:17:37 PM] [0] Command Line Parameter Name='fromsetup', Value=''.
    [2/1/2015 2:17:37 PM] [0] ExSetupUI was started with the following command: '-mode:upgrade -sourcedir:J:\EXSP01\SP3 /FromSetup'.
    [2/1/2015 2:17:41 PM] [0] Setup is choosing the domain controller to use
    [2/1/2015 2:17:41 PM] [0] Setup is choosing a local domain controller...
    [2/1/2015 2:17:43 PM] [0] Setup has chosen the local domain controller PGCDC.chakfig.local for initial queries
    [2/1/2015 2:17:43 PM] [0] PrepareAD has been run, and has replicated to this domain controller; so setup will use PGCDC.chakfig.local
    [2/1/2015 2:17:43 PM] [0] Setup is choosing a global catalog...
    [2/1/2015 2:17:43 PM] [0] Setup has chosen the global catalog server PGCDC.chakfig.local.
    [2/1/2015 2:17:43 PM] [0] Setup will use the domain controller 'PGCDC.chakfig.local'.
    [2/1/2015 2:17:43 PM] [0] Setup will use the global catalog 'PGCDC.chakfig.local'.
    [2/1/2015 2:17:43 PM] [0] Exchange configuration container for the organization is 'CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=chakfig,DC=local'.
    [2/1/2015 2:17:43 PM] [0] Exchange organization container for the organization is 'CN=chakfig,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=chakfig,DC=local'.
    [2/1/2015 2:17:43 PM] [0] Setup will search for an Exchange Server object for the local machine with name 'PGCVMEXG'.
    [2/1/2015 2:17:43 PM] [0] Exchange Server object found : 'CN=PGCVMEXG,CN=Servers,CN=Exchange Administrative Group (FYDIBOHF23SPDLT),CN=Administrative Groups,CN=chakfig,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=chakfig,DC=local'.
    [2/1/2015 2:17:43 PM] [0] The following roles are unpacked: BridgeheadRole ClientAccessRole MailboxRole AdminToolsRole 
    [2/1/2015 2:17:43 PM] [0] The following roles are installed: BridgeheadRole ClientAccessRole MailboxRole AdminToolsRole 
    [2/1/2015 2:17:43 PM] [0] The local server has some Exchange files installed.
    [2/1/2015 2:17:43 PM] [0] Setup will use the path 'J:\EXSP01\SP3' for installing Exchange.
    [2/1/2015 2:17:43 PM] [0] Setup will discover the installed roles from server object 'CN=PGCVMEXG,CN=Servers,CN=Exchange Administrative Group (FYDIBOHF23SPDLT),CN=Administrative Groups,CN=chakfig,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=chakfig,DC=local'.
    [2/1/2015 2:17:43 PM] [0] 'BridgeheadRole' is installed on the server object.
    [2/1/2015 2:17:43 PM] [0] 'ClientAccessRole' is installed on the server object.
    [2/1/2015 2:17:43 PM] [0] 'MailboxRole' is installed on the server object.
    [2/1/2015 2:17:43 PM] [0] The server is cluster type: 'None'.
    [2/1/2015 2:17:43 PM] [0] The requested cluster type: 'None'.
    [2/1/2015 2:17:43 PM] [0] The installation mode is set to: 'BuildToBuildUpgrade'.
    [2/1/2015 2:17:43 PM] [0] An Exchange organization with name 'chakfig' was found in this forest.
    [2/1/2015 2:17:43 PM] [0] Active Directory Initialization status : 'True'.
    [2/1/2015 2:17:43 PM] [0] Schema Update Required Status : 'False'.
    [2/1/2015 2:17:43 PM] [0] Organization Configuration Update Required Status : 'False'.
    [2/1/2015 2:17:43 PM] [0] Domain Configuration Update Required Status : 'False'.
    [2/1/2015 2:17:43 PM] [0] The locally installed version is 8.3.83.6.
    [2/1/2015 2:17:43 PM] [0] Exchange Installation Directory : 'C:\Program Files\Microsoft\Exchange Server'.
    [2/1/2015 2:17:43 PM] [0] The backup copy of the install path is 'C:\Program Files\Microsoft\Exchange Server'.
    [2/1/2015 2:17:43 PM] [0] The backup copy of the previously installed version is '8.2.176.2'.
    [2/1/2015 2:17:43 PM] [0] Setup is determining what organization-level operations to perform.
    [2/1/2015 2:17:43 PM] [0] Because the value was specified, setup is setting the argument OrganizationName to the value chakfig.
    [2/1/2015 2:17:43 PM] [0] The installed .msi file is current for this version of setup.
    [2/1/2015 2:17:43 PM] [0] RootDataHandler has 1 DataHandlers
    [2/1/2015 2:17:47 PM] [0] Validating options for the 4 requested roles
    [2/1/2015 2:17:47 PM] [0] UpgradeModeDataHandler has 5 handlers and 5 work units
    [2/1/2015 2:17:52 PM] [0] Validating options for the 4 requested roles
    [2/1/2015 2:17:52 PM] [0] UpgradeModeDataHandler has 5 handlers and 5 work units
    [2/1/2015 2:17:53 PM] [0] **************
    [2/1/2015 2:17:53 PM] [0] Setup will run the task 'test-setuphealth'
    [2/1/2015 2:17:53 PM] [1] Setup launched task 'test-setuphealth -DomainController 'PGCDC.chakfig.local' -DownloadConfigurationUpdates $true -ExchangeVersion '8.3.83.6' -Roles 'Bridgehead' -ScanType 'PrecheckUpgrade' -SetupRoles 'Bridgehead','ClientAccess','Mailbox','AdminTools'
    -TargetDir 'C:\Program Files\Microsoft\Exchange Server''  
    [2/1/2015 2:17:53 PM] [1] Beginning processing.
    [2/1/2015 2:18:19 PM] [1] Beginning processing.
    [2/1/2015 2:18:19 PM] [1] Administrator Active Directory session settings are:  View Entire Forest: 'True', Configuration Domain Controller: 'PGCDC.chakfig.local', Preferred Global Catalog: 'PGCDC.chakfig.local', Preferred Domain Controllers: '{ PGCDC.chakfig.local
    [2/1/2015 2:18:19 PM] [1] Searching objects "PGCVMEXG" of type "Server" under the root "$null".
    [2/1/2015 2:18:19 PM] [1] Previous operation run on domain controller 'PGCDC.chakfig.local'.
    [2/1/2015 2:18:19 PM] [1] Previous operation run on domain controller 'PGCDC.chakfig.local'.
    [2/1/2015 2:18:19 PM] [1] Preparing to output objects. Maximum result set size "unlimited".
    [2/1/2015 2:18:20 PM] [1] Ending processing.
    [2/1/2015 2:18:20 PM] [1] Beginning processing.
    [2/1/2015 2:18:20 PM] [1] Administrator Active Directory session settings are:  View Entire Forest: 'True', Configuration Domain Controller: 'PGCDC.chakfig.local', Preferred Global Catalog: 'PGCDC.chakfig.local', Preferred Domain Controllers: '{ PGCDC.chakfig.local
    [2/1/2015 2:18:20 PM] [1] Searching objects of type "SmtpSendConnectorConfig" with filter "$null", scope "SubTree" under the root "Administrative Groups".
    [2/1/2015 2:18:20 PM] [1] Previous operation run on domain controller 'PGCDC.chakfig.local'.
    [2/1/2015 2:18:20 PM] [1] Preparing to output objects. Maximum result set size "unlimited".
    [2/1/2015 2:18:20 PM] [1] Ending processing.
    [2/1/2015 2:18:20 PM] [1] Ending processing.
    [2/1/2015 2:18:20 PM] [0] **************
    [2/1/2015 2:18:20 PM] [0] Setup will run the task 'test-setuphealth'
    [2/1/2015 2:18:20 PM] [1] Setup launched task 'test-setuphealth -DomainController 'PGCDC.chakfig.local' -DownloadConfigurationUpdates $false -ExchangeVersion '8.3.83.6' -Roles 'ClientAccess' -ScanType 'PrecheckUpgrade' -SetupRoles 'Bridgehead','ClientAccess','Mailbox','AdminTools'
    -TargetDir 'C:\Program Files\Microsoft\Exchange Server' -IISInstalled $true'  
    [2/1/2015 2:18:20 PM] [1] Beginning processing.
    [2/1/2015 2:18:26 PM] [1] Beginning processing.
    [2/1/2015 2:18:26 PM] [1] Administrator Active Directory session settings are:  View Entire Forest: 'True', Configuration Domain Controller: 'PGCDC.chakfig.local', Preferred Global Catalog: 'PGCDC.chakfig.local', Preferred Domain Controllers: '{ PGCDC.chakfig.local
    [2/1/2015 2:18:55 PM] [1] Searching objects of type "SmtpSendConnectorConfig" with filter "$null", scope "SubTree" under the root "Administrative Groups".
    [2/1/2015 2:18:55 PM] [1] Previous operation run on domain controller 'PGCDC.chakfig.local'.
    [2/1/2015 2:18:55 PM] [1] Preparing to output objects. Maximum result set size "unlimited".
    [2/1/2015 2:18:55 PM] [1] Ending processing.
    [2/1/2015 2:18:55 PM] [1] Ending processing.
    [2/1/2015 2:18:55 PM] [0] **************
    [2/1/2015 2:18:55 PM] [0] Setup will run the task 'test-setuphealth'
    [2/1/2015 2:18:55 PM] [1] Setup launched task 'test-setuphealth -DomainController 'PGCDC.chakfig.local' -DownloadConfigurationUpdates $false -ExchangeVersion '8.3.83.6' -Roles 'ClientAccess' -ScanType 'PrecheckUpgrade' -SetupRoles 'Bridgehead','ClientAccess','Mailbox','AdminTools'
    -TargetDir 'C:\Program Files\Microsoft\Exchange Server' -IISInstalled $true'  
    [2/1/2015 2:18:55 PM] [1] Beginning processing.
    [2/1/2015 2:19:01 PM] [1] Beginning processing.
    [2/1/2015 2:19:01 PM] [1] Administrator Active Directory session settings are:  View Entire Forest: 'True', Configuration Domain Controller: 'PGCDC.chakfig.local', Preferred Global Catalog: 'PGCDC.chakfig.local', Preferred Domain Controllers: '{ PGCDC.chakfig.local
    [2/1/2015 2:19:01 PM] [1] Searching objects "PGCVMEXG" of type "Server" under the root "$null".
    [2/1/2015 2:19:01 PM] [1] Previous operation run on domain controller 'PGCDC.chakfig.local'.
    [2/1/2015 2:19:01 PM] [1] Previous operation run on domain controller 'PGCDC.chakfig.local'.
    [2/1/2015 2:19:01 PM] [1] Preparing to output objects. Maximum result set size "unlimited".
    [2/1/2015 2:19:01 PM] [1] Ending processing.
    [2/1/2015 2:19:01 PM] [1] Ending processing.
    [2/1/2015 2:19:01 PM] [0] **************
    [2/1/2015 2:19:01 PM] [0] Setup will run the task 'test-setuphealth'
    [2/1/2015 2:19:01 PM] [1] Setup launched task 'test-setuphealth -DomainController 'PGCDC.chakfig.local' -DownloadConfigurationUpdates $false -ExchangeVersion '8.3.83.6' -Roles 'Mailbox' -ScanType 'PrecheckUpgrade' -SetupRoles 'Bridgehead','ClientAccess','Mailbox','AdminTools'
    -TargetDir 'C:\Program Files\Microsoft\Exchange Server' -IISInstalled $true'  
    [2/1/2015 2:19:01 PM] [1] Beginning processing.
    [2/1/2015 2:19:04 PM] [1] Beginning processing.
    [2/1/2015 2:19:04 PM] [1] Ending processing.
    [2/1/2015 2:19:07 PM] [1] Beginning processing.
    [2/1/2015 2:19:07 PM] [1] Administrator Active Directory session settings are:  View Entire Forest: 'True', Configuration Domain Controller: 'PGCDC.chakfig.local', Preferred Global Catalog: 'PGCDC.chakfig.local', Preferred Domain Controllers: '{ PGCDC.chakfig.local
    [2/1/2015 2:19:07 PM] [1] Searching objects "PGCVMEXG" of type "Server" under the root "$null".
    [2/1/2015 2:19:07 PM] [1] Previous operation run on domain controller 'PGCDC.chakfig.local'.
    [2/1/2015 2:19:07 PM] [1] Previous operation run on domain controller 'PGCDC.chakfig.local'.
    [2/1/2015 2:19:07 PM] [1] Preparing to output objects. Maximum result set size "unlimited".
    [2/1/2015 2:19:07 PM] [1] Ending processing.
    [2/1/2015 2:19:08 PM] [1] Ending processing.
    [2/1/2015 2:19:20 PM] [0] Setup is determining what organization-level operations to perform.
    [2/1/2015 2:19:20 PM] [0] Because the value was specified, setup is setting the argument OrganizationName to the value chakfig.
    [2/1/2015 2:19:20 PM] [0] The installed .msi file is current for this version of setup.
    [2/1/2015 2:19:20 PM] [0] RootDataHandler has 1 DataHandlers
    [2/1/2015 2:19:20 PM] [0] **************
    [2/1/2015 2:19:20 PM] [0] Setup will run the task 'Install-BridgeheadRole'
    [2/1/2015 2:19:20 PM] [1] Setup launched task 'Install-BridgeheadRole -DomainController 'PGCDC.chakfig.local' -UpdatesDir 'J:\EXSP01\SP3\Updates''  
    [2/1/2015 2:19:20 PM] [1] Beginning processing.
    [2/1/2015 2:19:20 PM] [1] Attempting Install for BridgeheadRole.
    [2/1/2015 2:19:20 PM] [1] The following roles are current: 
    [2/1/2015 2:19:26 PM] [1] Reading components for role 'BridgeheadRole' from 'res://BridgeheadRoleDefinition.xml'
    [2/1/2015 2:19:26 PM] [1] Found 22 components
    [2/1/2015 2:19:26 PM] [1] Loaded component 'All Roles Common First - Run Once' with 10 task info blocks from 'res://AllRolesCommonFirst_RunOnce.xml'
    [2/1/2015 2:19:26 PM] [1] Loaded component 'All Roles Common First' with 8 task info blocks from 'res://AllRolesCommonFirst.xml'
    [2/1/2015 2:19:27 PM] [1] Loaded component 'All Roles Precompile Management Binaries' with 30 task info blocks from 'res://AllRolesPrecompileManagementBinaries.xml'
    [2/1/2015 2:19:27 PM] [1] Loaded component 'Bridgehead Permissions Configuration' with 1 task info blocks from 'res://BridgeheadLocalPermissionsComponent.xml'
    [2/1/2015 2:19:27 PM] [1] Loaded component 'Common Perf Counters ' with 2 task info blocks from 'res://CommonPerfCountersComponent.xml'
    [2/1/2015 2:19:27 PM] [1] Loaded component 'Provision Server' with 9 task info blocks from 'res://ProvisionServerComponent.xml'
    [2/1/2015 2:19:28 PM] [1] Loaded component 'All Active-Directory Roles Common' with 14 task info blocks from 'res://AllADRolesCommon.xml'
    [2/1/2015 2:19:28 PM] [1] Loaded component 'Exchange 2003 Pseudo-MTA Configuration' with 1 task info blocks from 'res://LegacyMTAComponent.xml'
    [2/1/2015 2:19:28 PM] [1] Loaded component 'Exchange 2003 SMTP VSI Configuration' with 1 task info blocks from 'res://LegacySMTPComponent.xml'
    [2/1/2015 2:19:29 PM] [1] Loaded component 'Transport Perf Counters' with 21 task info blocks from 'res://TransportPerfCountersComponent.xml'
    [2/1/2015 2:19:29 PM] [1] Loaded component 'Enable RPC-EPMAP firewall exception' with 1 task info blocks from 'res://RpcEpmapFirewallException.xml'
    [2/1/2015 2:19:29 PM] [1] Loaded component 'Bridgehead Role Setter' with 1 task info blocks from 'res://BridgeheadRoleSetterComponent.xml'
    [2/1/2015 2:19:29 PM] [1] Loaded component 'Transport Common Configuration' with 22 task info blocks from 'res://TransportCommonComponent.xml'
    [2/1/2015 2:19:30 PM] [1] Loaded component 'Bridgehead Perf Counters' with 8 task info blocks from 'res://BridgeheadPerfCountersComponent.xml'
    [2/1/2015 2:19:30 PM] [1] Loaded component 'Bridgehead Configuration' with 18 task info blocks from 'res://BridgeheadComponent.xml'
    [2/1/2015 2:19:30 PM] [1] Loaded component 'Transport Log Search Service' with 1 task info blocks from 'res://TransportLogSearchServiceComponent.xml'
    [2/1/2015 2:19:31 PM] [1] Loaded component 'Data Storage Configuration' with 1 task info blocks from 'res://DataStorageComponent.xml'
    [2/1/2015 2:19:31 PM] [1] Loaded component 'Monitoring Service Configuration' with 5 task info blocks from 'res://MonitoringComponent.xml'
    [2/1/2015 2:19:31 PM] [1] Loaded component 'Active Directory Topology Service Configuration' with 2 task info blocks from 'res://AllADRolesCommonServiceControl.xml'
    [2/1/2015 2:19:31 PM] [1] Loaded component 'Bridgehead Service Configuration' with 3 task info blocks from 'res://BridgeheadServiceControl.xml'
    [2/1/2015 2:19:32 PM] [1] Loaded component 'Transport Common Service Control' with 1 task info blocks from 'res://TransportCommonServiceControl.xml'
    [2/1/2015 2:19:32 PM] [1] Loaded component 'All Roles Common Last' with 4 task info blocks from 'res://AllRolesCommonLast.xml'
    [2/1/2015 2:19:32 PM] [1] The following roles are installed: BridgeheadRole ClientAccessRole MailboxRole AdminToolsRole 
    [2/1/2015 2:19:32 PM] [1] Writing informational script to 'C:\ExchangeSetupLogs\Install-BridgeheadRole-20150201-1419320497.ps1'
    [2/1/2015 2:19:32 PM] [1] Executing '$RoleIsClusterNode = $False', handleError = False
    [2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleIsClusterNode = $False'.
    [2/1/2015 2:19:32 PM] [1] Executing '$RoleRoles = "BridgeheadRole,ClientAccessRole,MailboxRole,AdminToolsRole"', handleError = False
    [2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleRoles = "BridgeheadRole,ClientAccessRole,MailboxRole,AdminToolsRole"'.
    [2/1/2015 2:19:32 PM] [1] Executing '$RoleIsAdminToolsRoleInstalled = $True', handleError = False
    [2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleIsAdminToolsRoleInstalled = $True'.
    [2/1/2015 2:19:32 PM] [1] Executing '$RoleNetBIOSName = "pgcvmexg"', handleError = False
    [2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleNetBIOSName = "pgcvmexg"'.
    [2/1/2015 2:19:32 PM] [1] Executing '$RoleInvocationID = "20150201-1419320497"', handleError = False
    [2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleInvocationID = "20150201-1419320497"'.
    [2/1/2015 2:19:32 PM] [1] Executing '$RoleInstallPath = "C:\Program Files\Microsoft\Exchange Server\"', handleError = False
    [2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleInstallPath = "C:\Program Files\Microsoft\Exchange Server\"'.
    [2/1/2015 2:19:32 PM] [1] Executing '$RoleStartTransportService = $True', handleError = False
    [2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleStartTransportService = $True'.
    [2/1/2015 2:19:32 PM] [1] Executing '$RoleLoggedOnUser = "chakfig\Administrator"', handleError = False
    [2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleLoggedOnUser = "chakfig\Administrator"'.
    [2/1/2015 2:19:32 PM] [1] Executing '$RoleInstallationMode = "BuildToBuildUpgrade"', handleError = False
    [2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleInstallationMode = "BuildToBuildUpgrade"'.
    [2/1/2015 2:19:32 PM] [1] Executing '$RolePreviousVersion = "8.2.176.2"', handleError = False
    [2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RolePreviousVersion = "8.2.176.2"'.
    [2/1/2015 2:19:32 PM] [1] Executing '$RoleIsMailboxRoleInstalled = $True', handleError = False
    [2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleIsMailboxRoleInstalled = $True'.
    [2/1/2015 2:19:32 PM] [1] Executing '$RoleBinPath = "C:\Program Files\Microsoft\Exchange Server\Bin"', handleError = False
    [2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleBinPath = "C:\Program Files\Microsoft\Exchange Server\Bin"'.
    [2/1/2015 2:19:32 PM] [1] Executing '$RoleSetupLoggingPath = "C:\ExchangeSetupLogs"', handleError = False
    [2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleSetupLoggingPath = "C:\ExchangeSetupLogs"'.
    [2/1/2015 2:19:32 PM] [1] Executing '$RoleFqdnOrName = "pgcvmexg"', handleError = False
    [2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleFqdnOrName = "pgcvmexg"'.
    [2/1/2015 2:19:32 PM] [1] Executing '$RoleTargetVersion = "8.3.83.6"', handleError = False
    [2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleTargetVersion = "8.3.83.6"'.
    [2/1/2015 2:19:32 PM] [1] Executing '$RoleUpdatesDir = "J:\EXSP01\SP3\Updates"', handleError = False
    [2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleUpdatesDir = "J:\EXSP01\SP3\Updates"'.
    [2/1/2015 2:19:32 PM] [1] Executing '$RoleIsClientAccessRoleInstalled = $True', handleError = False
    [2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleIsClientAccessRoleInstalled = $True'.
    [2/1/2015 2:19:32 PM] [1] Executing '$RoleRoleName = "BridgeheadRole"', handleError = False
    [2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleRoleName = "BridgeheadRole"'.
    [2/1/2015 2:19:32 PM] [1] Executing '$RoleDomainController = "PGCDC.chakfig.local"', handleError = False
    [2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleDomainController = "PGCDC.chakfig.local"'.
    [2/1/2015 2:19:32 PM] [1] Executing '$RoleProductPlatform = "amd64"', handleError = False
    [2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleProductPlatform = "amd64"'.
    [2/1/2015 2:19:32 PM] [1] Executing '$RoleIsBridgeheadRoleInstalled = $True', handleError = False
    [2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleIsBridgeheadRoleInstalled = $True'.
    [2/1/2015 2:19:32 PM] [1] Executing '$RoleLoggingPath = "C:\Program Files\Microsoft\Exchange Server\Logging"', handleError = False
    [2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); $RoleLoggingPath = "C:\Program Files\Microsoft\Exchange Server\Logging"'.
    [2/1/2015 2:19:32 PM] [1] Found 136 tasks to execute
    [2/1/2015 2:19:32 PM] [1] Processing component 'All Roles Common First - Run Once' (Configuring the server.).
    [2/1/2015 2:19:32 PM] [1] Executing 'if ($RoleProductPlatform -eq "amd64") { $watsonMSI = 'dw20sharedamd64.msi'; $watsonMSILogFileName = 'Installdw20sharedamd64.msilog'; } else { $watsonMSI = 'dw20shared.msi'; $watsonMSILogFileName = 'Installdw20shared.msilog';
    } install-MsiPackage -PackagePath ($RoleInstallPath + "bin\$watsonMSI") -LogFile ($RoleSetupLoggingPath + "\$watsonMSILogFileName") -UpdatesDir $RoleUpdatesDir -PropertyValues ("APPGUID=`"{24B2C164-DE66-44fe-B468-A46D9D5E6B31}`"
    LOGVERBOSE=1");', handleError = False
    [2/1/2015 2:19:32 PM] [2] Launching sub-task '$error.Clear(); if ($RoleProductPlatform -eq "amd64") { $watsonMSI = 'dw20sharedamd64.msi'; $watsonMSILogFileName = 'Installdw20sharedamd64.msilog'; } else { $watsonMSI = 'dw20shared.msi'; $watsonMSILogFileName
    = 'Installdw20shared.msilog'; } install-MsiPackage -PackagePath ($RoleInstallPath + "bin\$watsonMSI") -LogFile ($RoleSetupLoggingPath + "\$watsonMSILogFileName") -UpdatesDir $RoleUpdatesDir -PropertyValues ("APPGUID=`"{24B2C164-DE66-44fe-B468-A46D9D5E6B31}`"
    LOGVERBOSE=1");'.
    [2/1/2015 2:19:32 PM] [2] Beginning processing.
    [2/1/2015 2:19:33 PM] [2] ProductCode is '95120000-00b9-0409-1000-0000000ff1ce'.
    [2/1/2015 2:19:33 PM] [2] PackagePath was set to 'C:\Program Files\Microsoft\Exchange Server\bin\dw20sharedamd64.msi'; normalizing to 'C:\Program Files\Microsoft\Exchange Server\bin\dw20sharedamd64.msi'.
    [2/1/2015 2:19:33 PM] [2] ProductCode is '95120000-00b9-0409-1000-0000000ff1ce'.
    [2/1/2015 2:19:33 PM] [2] Installing MSI package 'C:\Program Files\Microsoft\Exchange Server\bin\dw20sharedamd64.msi'.
    [2/1/2015 2:19:34 PM] [2] Ending processing.
    [2/1/2015 2:19:34 PM] [1] Executing 'Set-InstallPathInAppConfig -ConfigFileRelativePath "Scripts\" -ConfigFileName "Exchange2007.xml" -ReplacementString "%ProgramFiles%\Microsoft\Exchange Server\";', handleError = False
    [2/1/2015 2:19:34 PM] [2] Launching sub-task '$error.Clear(); Set-InstallPathInAppConfig -ConfigFileRelativePath "Scripts\" -ConfigFileName "Exchange2007.xml" -ReplacementString "%ProgramFiles%\Microsoft\Exchange Server\";'.
    [2/1/2015 2:19:34 PM] [2] Beginning processing.
    [2/1/2015 2:19:34 PM] [2] Ending processing.
    [2/1/2015 2:19:34 PM] [1] Executing 'Remove-XmlNode -XmlFileRelativePath "Scripts\" -XmlFileName "Exchange2007.xml" -XmlNodeNameToRemove "_locDefinition";', handleError = False
    [2/1/2015 2:19:34 PM] [2] Launching sub-task '$error.Clear(); Remove-XmlNode -XmlFileRelativePath "Scripts\" -XmlFileName "Exchange2007.xml" -XmlNodeNameToRemove "_locDefinition";'.
    [2/1/2015 2:19:34 PM] [2] Beginning processing.
    [2/1/2015 2:19:34 PM] [2] ExchangeInstallPath = C:\Program Files\Microsoft\Exchange Server\, Relative Path = Scripts\, Xml Full File Path = C:\Program Files\Microsoft\Exchange Server\Scripts\Exchange2007.xml, Xml Node Name = _locDefinition
    [2/1/2015 2:19:34 PM] [2] Ending processing.
    [2/1/2015 2:19:34 PM] [1] Executing 'Set-InstallPathInAppConfig -ConfigFileRelativePath "Scripts\" -ConfigFileName "Exchange2007Edge.xml" -ReplacementString "%ProgramFiles%\Microsoft\Exchange Server\";', handleError = False
    [2/1/2015 2:19:34 PM] [2] Launching sub-task '$error.Clear(); Set-InstallPathInAppConfig -ConfigFileRelativePath "Scripts\" -ConfigFileName "Exchange2007Edge.xml" -ReplacementString "%ProgramFiles%\Microsoft\Exchange Server\";'.
    [2/1/2015 2:19:34 PM] [2] Beginning processing.
    [2/1/2015 2:19:34 PM] [2] Ending processing.
    [2/1/2015 2:19:34 PM] [1] Executing 'Remove-XmlNode -XmlFileRelativePath "Scripts\" -XmlFileName "Exchange2007Edge.xml" -XmlNodeNameToRemove "_locDefinition";', handleError = False
    [2/1/2015 2:19:34 PM] [2] Launching sub-task '$error.Clear(); Remove-XmlNode -XmlFileRelativePath "Scripts\" -XmlFileName "Exchange2007Edge.xml" -XmlNodeNameToRemove "_locDefinition";'.
    [2/1/2015 2:19:34 PM] [2] Beginning processing.
    [2/1/2015 2:19:34 PM] [2] ExchangeInstallPath = C:\Program Files\Microsoft\Exchange Server\, Relative Path = Scripts\, Xml Full File Path = C:\Program Files\Microsoft\Exchange Server\Scripts\Exchange2007Edge.xml, Xml Node Name = _locDefinition
    [2/1/2015 2:19:34 PM] [2] Ending processing.
    [2/1/2015 2:19:34 PM] [1] Executing 'Set-InstallPathInAppConfig -ConfigFileRelativePath "Scripts\" -ConfigFileName "Exchange2007_WinSrv2008.xml" -ReplacementString "%ProgramFiles%\Microsoft\Exchange Server\";', handleError = False
    [2/1/2015 2:19:34 PM] [2] Launching sub-task '$error.Clear(); Set-InstallPathInAppConfig -ConfigFileRelativePath "Scripts\" -ConfigFileName "Exchange2007_WinSrv2008.xml" -ReplacementString "%ProgramFiles%\Microsoft\Exchange Server\";'.
    [2/1/2015 2:19:34 PM] [2] Beginning processing.
    [2/1/2015 2:19:34 PM] [2] Ending processing.
    [2/1/2015 2:19:34 PM] [1] Executing 'Remove-XmlNode -XmlFileRelativePath "Scripts\" -XmlFileName "Exchange2007_WinSrv2008.xml" -XmlNodeNameToRemove "_locDefinition";', handleError = False
    [2/1/2015 2:19:34 PM] [2] Launching sub-task '$error.Clear(); Remove-XmlNode -XmlFileRelativePath "Scripts\" -XmlFileName "Exchange2007_WinSrv2008.xml" -XmlNodeNameToRemove "_locDefinition";'.
    [2/1/2015 2:19:34 PM] [2] Beginning processing.
    [2/1/2015 2:19:34 PM] [2] ExchangeInstallPath = C:\Program Files\Microsoft\Exchange Server\, Relative Path = Scripts\, Xml Full File Path = C:\Program Files\Microsoft\Exchange Server\Scripts\Exchange2007_WinSrv2008.xml, Xml Node Name = _locDefinition
    [2/1/2015 2:19:34 PM] [2] Ending processing.
    [2/1/2015 2:19:34 PM] [1] Executing 'Set-InstallPathInAppConfig -ConfigFileRelativePath "Scripts\" -ConfigFileName "Exchange2007Edge_WinSrv2008.xml" -ReplacementString "%ProgramFiles%\Microsoft\Exchange Server\";', handleError
    = False
    [2/1/2015 2:19:34 PM] [2] Launching sub-task '$error.Clear(); Set-InstallPathInAppConfig -ConfigFileRelativePath "Scripts\" -ConfigFileName "Exchange2007Edge_WinSrv2008.xml" -ReplacementString "%ProgramFiles%\Microsoft\Exchange Server\";'.
    [2/1/2015 2:19:34 PM] [2] Beginning processing.
    [2/1/2015 2:19:34 PM] [2] Ending processing.
    [2/1/2015 2:19:34 PM] [1] Executing 'Remove-XmlNode -XmlFileRelativePath "Scripts\" -XmlFileName "Exchange2007Edge_WinSrv2008.xml" -XmlNodeNameToRemove "_locDefinition";', handleError = False
    [2/1/2015 2:19:34 PM] [2] Launching sub-task '$error.Clear(); Remove-XmlNode -XmlFileRelativePath "Scripts\" -XmlFileName "Exchange2007Edge_WinSrv2008.xml" -XmlNodeNameToRemove "_locDefinition";'.
    [2/1/2015 2:19:34 PM] [2] Beginning processing.
    [2/1/2015 2:19:34 PM] [2] ExchangeInstallPath = C:\Program Files\Microsoft\Exchange Server\, Relative Path = Scripts\, Xml Full File Path = C:\Program Files\Microsoft\Exchange Server\Scripts\Exchange2007Edge_WinSrv2008.xml, Xml Node Name = _locDefinition
    [2/1/2015 2:19:34 PM] [2] Ending processing.
    [2/1/2015 2:19:34 PM] [1] Executing 'Set-WERRegistryMarkers;', handleError = False
    [2/1/2015 2:19:34 PM] [2] Launching sub-task '$error.Clear(); Set-WERRegistryMarkers;'.
    [2/1/2015 2:19:34 PM] [2] Beginning processing.
    [2/1/2015 2:19:34 PM] [2] Ending processing.
    [2/1/2015 2:19:35 PM] [1] Processing component 'All Roles Common First' (Creating the Exchange server configuration in the Active Directory).
    [2/1/2015 2:19:35 PM] [1] Executing '$RoleNames = $RoleRoles.Replace('Role','').Split(','); .\ServiceControl.ps1 EnableServices $RoleNames', handleError = False
    [2/1/2015 2:19:35 PM] [2] Launching sub-task '$error.Clear(); $RoleNames = $RoleRoles.Replace('Role','').Split(','); .\ServiceControl.ps1 EnableServices $RoleNames'.
    [2/1/2015 2:19:35 PM] [1] Executing 'Set-LocalPermissions', handleError = False
    [2/1/2015 2:19:35 PM] [2] Launching sub-task '$error.Clear(); Set-LocalPermissions'.
    [2/1/2015 2:19:35 PM] [2] Beginning processing.
    [2/1/2015 2:19:49 PM] [2] Ending processing.
    [2/1/2015 2:19:49 PM] [1] Executing 'get-service | where { $_.Name -ieq "HealthService" } | stop-service -Force:$true', handleError = False
    [2/1/2015 2:19:49 PM] [2] Launching sub-task '$error.Clear(); get-service | where { $_.Name -ieq "HealthService" } | stop-service -Force:$true'.
    [2/1/2015 2:19:49 PM] [1] Executing 'get-service | where { $_.Name -ieq "MOM" } | stop-service -Force:$true', handleError = False
    [2/1/2015 2:19:49 PM] [2] Launching sub-task '$error.Clear(); get-service | where { $_.Name -ieq "MOM" } | stop-service -Force:$true'.
    [2/1/2015 2:19:49 PM] [1] Executing 'get-service | where { $_.Name -ieq "OnePoint" } | stop-service -Force:$true', handleError = False
    [2/1/2015 2:19:49 PM] [2] Launching sub-task '$error.Clear(); get-service | where { $_.Name -ieq "OnePoint" } | stop-service -Force:$true'.
    [2/1/2015 2:19:49 PM] [1] Executing '$mofFilePath = ($RoleInstallPath + "bin\Exchange.MOF"); $mflFilePath = ($RoleInstallPath + "bin\Exchange.MFL"); compile-moffile -MofFilePath:$mofFilePath; compile-moffile -MofFilePath:$mflFilePath;',
    handleError = True
    [2/1/2015 2:19:49 PM] [2] Launching sub-task '$error.Clear(); $mofFilePath = ($RoleInstallPath + "bin\Exchange.MOF"); $mflFilePath = ($RoleInstallPath + "bin\Exchange.MFL"); compile-moffile -MofFilePath:$mofFilePath; compile-moffile
    -MofFilePath:$mflFilePath;'.
    [2/1/2015 2:19:49 PM] [2] Beginning processing.
    [2/1/2015 2:19:49 PM] [2] Exchange tracing provider was installed successfully.
    [2/1/2015 2:19:49 PM] [2] Ending processing.
    [2/1/2015 2:19:49 PM] [2] Beginning processing.
    [2/1/2015 2:19:49 PM] [2] Exchange tracing provider was installed successfully.
    [2/1/2015 2:19:49 PM] [2] Ending processing.
    [2/1/2015 2:19:49 PM] [1] Processing component 'All Roles Precompile Management Binaries' (Pre-compiling management binaries.).
    [2/1/2015 2:19:49 PM] [1] Executing '$fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\microsoft.Exchange.Rpc.dll"); precompile-ManagedBinary -BinaryName $fullPath;', handleError = False
    [2/1/2015 2:19:49 PM] [2] Launching sub-task '$error.Clear(); $fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\microsoft.Exchange.Rpc.dll"); precompile-ManagedBinary -BinaryName $fullPath;'.
    [2/1/2015 2:19:49 PM] [2] Beginning processing.
    [2/1/2015 2:19:49 PM] [2] Starting: C:\Windows\Microsoft.NET\Framework64\v2.0.50727\ngen.exe arguments: install "C:\Program Files\Microsoft\Exchange Server\bin\microsoft.Exchange.Rpc.dll" /verbose
    [2/1/2015 2:19:50 PM] [2] Process standard output: Microsoft (R) CLR Native Image Generator - Version 2.0.50727.4252
    Copyright (c) Microsoft Corporation.  All rights reserved.
    Installing assembly C:\Program Files\Microsoft\Exchange Server\bin\microsoft.Exchange.Rpc.dll
    All compilation targets are up to date.
    [2/1/2015 2:19:50 PM] [2] Process standard error: 
    [2/1/2015 2:19:50 PM] [2] Ending processing.
    [2/1/2015 2:19:50 PM] [1] Executing '$fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\microsoft.Exchange.Common.IL.dll"); precompile-ManagedBinary -BinaryName $fullPath;', handleError = False
    [2/1/2015 2:19:50 PM] [2] Launching sub-task '$error.Clear(); $fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\microsoft.Exchange.Common.IL.dll"); precompile-ManagedBinary -BinaryName $fullPath;'.
    [2/1/2015 2:19:50 PM] [2] Beginning processing.
    [2/1/2015 2:19:50 PM] [2] Starting: C:\Windows\Microsoft.NET\Framework64\v2.0.50727\ngen.exe arguments: install "C:\Program Files\Microsoft\Exchange Server\bin\microsoft.Exchange.Common.IL.dll" /verbose
    [2/1/2015 2:19:50 PM] [2] Process standard output: Microsoft (R) CLR Native Image Generator - Version 2.0.50727.4252
    Copyright (c) Microsoft Corporation.  All rights reserved.
    Installing assembly C:\Program Files\Microsoft\Exchange Server\bin\microsoft.Exchange.Common.IL.dll
    All compilation targets are up to date.
    [2/1/2015 2:19:50 PM] [2] Process standard error: 
    [2/1/2015 2:19:50 PM] [2] Ending processing.
    [2/1/2015 2:19:50 PM] [1] Executing '$fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\Microsoft.Exchange.Diagnostics.dll"); precompile-ManagedBinary -BinaryName $fullPath;', handleError = False
    [2/1/2015 2:19:50 PM] [2] Launching sub-task '$error.Clear(); $fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\Microsoft.Exchange.Diagnostics.dll"); precompile-ManagedBinary -BinaryName $fullPath;'.
    [2/1/2015 2:19:50 PM] [2] Beginning processing.
    [2/1/2015 2:19:50 PM] [2] Starting: C:\Windows\Microsoft.NET\Framework64\v2.0.50727\ngen.exe arguments: install "C:\Program Files\Microsoft\Exchange Server\bin\Microsoft.Exchange.Diagnostics.dll" /verbose
    [2/1/2015 2:19:51 PM] [2] Process standard output: Microsoft (R) CLR Native Image Generator - Version 2.0.50727.4252
    Copyright (c) Microsoft Corporation.  All rights reserved.
    Installing assembly C:\Program Files\Microsoft\Exchange Server\bin\Microsoft.Exchange.Diagnostics.dll
    All compilation targets are up to date.
    [2/1/2015 2:19:51 PM] [2] Process standard error: 
    [2/1/2015 2:19:51 PM] [2] Ending processing
    [2/1/2015 2:20:07 PM] [2] Process standard error: 
    [2/1/2015 2:20:07 PM] [2] Ending processing.
    [2/1/2015 2:20:07 PM] [1] Executing '$fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\Microsoft.Exchange.PowerShell.configuration.dll"); precompile-ManagedBinary -BinaryName $fullPath;', handleError = False
    [2/1/2015 2:20:07 PM] [2] Launching sub-task '$error.Clear(); $fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\Microsoft.Exchange.PowerShell.configuration.dll"); precompile-ManagedBinary -BinaryName $fullPath;'.
    [2/1/2015 2:20:07 PM] [2] Beginning processing.
    [2/1/2015 2:20:07 PM] [2] Starting: C:\Windows\Microsoft.NET\Framework64\v2.0.50727\ngen.exe arguments: install "C:\Program Files\Microsoft\Exchange Server\bin\Microsoft.Exchange.PowerShell.configuration.dll" /verbose
    [2/1/2015 2:20:10 PM] [2] Process standard output: Microsoft (R) CLR Native Image Generator - Version 2.0.50727.4252
    Copyright (c) Microsoft Corporation.  All rights reserved.
    Installing assembly C:\Program Files\Microsoft\Exchange Server\bin\Microsoft.Exchange.PowerShell.configuration.dll
    All compilation targets are up to date.
    [2/1/2015 2:20:10 PM] [2] Process standard error: 
    [2/1/2015 2:20:10 PM] [2] Ending processing.
    [2/1/2015 2:20:10 PM] [1] Executing '$fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\Microsoft.Exchange.Management.SnapIn.Esm.dll"); precompile-ManagedBinary -BinaryName $fullPath;', handleError = False
    [2/1/2015 2:20:10 PM] [2] Launching sub-task '$error.Clear(); $fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\Microsoft.Exchange.Management.SnapIn.Esm.dll"); precompile-ManagedBinary -BinaryName $fullPath;'.
    [2/1/2015 2:20:10 PM] [2] Beginning processing.
    [2/1/2015 2:20:10 PM] [2] Starting: C:\Windows\Microsoft.NET\Framework64\v2.0.50727\ngen.exe arguments: install "C:\Program Files\Microsoft\Exchange Server\bin\Microsoft.Exchange.Management.SnapIn.Esm.dll" /verbose
    [2/1/2015 2:20:12 PM] [2] Process standard output: Microsoft (R) CLR Native Image Generator - Version 2.0.50727.4252
    Copyright (c) Microsoft Corporation.  All rights reserved.
    Installing assembly C:\Program Files\Microsoft\Exchange Server\bin\Microsoft.Exchange.Management.SnapIn.Esm.dll
    All compilation targets are up to date.
    [2/1/2015 2:20:12 PM] [2] Process standard error: 
    [2/1/2015 2:20:12 PM] [2] Ending processing.
    [2/1/2015 2:20:12 PM] [1] Processing component 'Bridgehead Permissions Configuration' (Setting folder and registry permissions).
    [2/1/2015 2:20:12 PM] [1] Executing 'Set-LocalPermissions -Feature:"Bridgehead"', handleError = False
    [2/1/2015 2:20:12 PM] [2] Launching sub-task '$error.Clear(); Set-LocalPermissions -Feature:"Bridgehead"'.
    [2/1/2015 2:20:12 PM] [2] Beginning processing.
    [2/1/2015 2:20:12 PM] [2] Ending processing.
    [2/1/2015 2:20:12 PM] [1] Processing component 'Common Perf Counters ' (Configuring performance counters).
    [2/1/2015 2:20:12 PM] [1] Executing 'new-perfcounters -DefinitionFileName ExchangeTopologyPerformanceCounters.xml', handleError = True
    [2/1/2015 2:20:12 PM] [2] Launching sub-task '$error.Clear(); new-perfcounters -DefinitionFileName ExchangeTopologyPerformanceCounters.xml'.
    [2/1/2015 2:20:12 PM] [2] Beginning processing.
    [2/1/2015 2:20:12 PM] [2] Processing file: C:\Program Files\Microsoft\Exchange Server\Setup\Perf\ExchangeTopologyPerformanceCounters.xml
    [2/1/2015 2:20:12 PM] [2] Performance counter name is Latest Exchange Topology Discovery Time in Seconds, type is NumberOfItems32.
    [2/1/2015 2:20:12 PM] [2] Performance counter name is Number of Exchange Topology Discoveries, type is NumberOfItems32.
    [2/1/2015 2:20:12 PM] [2] Performance counter name is Number of Siteless Servers, type is NumberOfItems32.
    Appreciate if someone can help us move forward in this scenario.
    We have
    1. disabled anti virus and tried.
    2. removed watermarks and action entries in the registry
    3. tried almost everything mentioned on google but i am not able to move forward.
    Please help. we need this as part of our migration to Exchange 2013 for co-existence.
    Thank you.
    Philip

    ExchangeSetup.log (part 3)
    [2/2/2015 8:06:45 PM] [1] Executing '$RoleSetupLoggingPath = "C:\ExchangeSetupLogs"', handleError = False
    [2/2/2015 8:06:45 PM] [2] Launching sub-task '$error.Clear(); $RoleSetupLoggingPath = "C:\ExchangeSetupLogs"'.
    [2/2/2015 8:06:45 PM] [1] Executing '$RoleFqdnOrName = "pgcvmexg"', handleError = False
    [2/2/2015 8:06:45 PM] [2] Launching sub-task '$error.Clear(); $RoleFqdnOrName = "pgcvmexg"'.
    [2/2/2015 8:06:45 PM] [1] Executing '$RoleTargetVersion = "8.3.83.6"', handleError = False
    [2/2/2015 8:06:45 PM] [2] Launching sub-task '$error.Clear(); $RoleTargetVersion = "8.3.83.6"'.
    [2/2/2015 8:06:45 PM] [1] Executing '$RoleUpdatesDir = "C:\SP3\Updates"', handleError = False
    [2/2/2015 8:06:45 PM] [2] Launching sub-task '$error.Clear(); $RoleUpdatesDir = "C:\SP3\Updates"'.
    [2/2/2015 8:06:45 PM] [1] Executing '$RoleIsClientAccessRoleInstalled = $True', handleError = False
    [2/2/2015 8:06:45 PM] [2] Launching sub-task '$error.Clear(); $RoleIsClientAccessRoleInstalled = $True'.
    [2/2/2015 8:06:45 PM] [1] Executing '$RoleRoleName = "BridgeheadRole"', handleError = False
    [2/2/2015 8:06:45 PM] [2] Launching sub-task '$error.Clear(); $RoleRoleName = "BridgeheadRole"'.
    [2/2/2015 8:06:45 PM] [1] Executing '$RoleDomainController = "PGCDC.platcorp.local"', handleError = False
    [2/2/2015 8:06:45 PM] [2] Launching sub-task '$error.Clear(); $RoleDomainController = "PGCDC.platcorp.local"'.
    [2/2/2015 8:06:45 PM] [1] Executing '$RoleProductPlatform = "amd64"', handleError = False
    [2/2/2015 8:06:45 PM] [2] Launching sub-task '$error.Clear(); $RoleProductPlatform = "amd64"'.
    [2/2/2015 8:06:45 PM] [1] Executing '$RoleIsBridgeheadRoleInstalled = $True', handleError = False
    [2/2/2015 8:06:45 PM] [2] Launching sub-task '$error.Clear(); $RoleIsBridgeheadRoleInstalled = $True'.
    [2/2/2015 8:06:45 PM] [1] Executing '$RoleLoggingPath = "C:\Program Files\Microsoft\Exchange Server\Logging"', handleError = False
    [2/2/2015 8:06:45 PM] [2] Launching sub-task '$error.Clear(); $RoleLoggingPath = "C:\Program Files\Microsoft\Exchange Server\Logging"'.
    [2/2/2015 8:06:45 PM] [1] Found 136 tasks to execute
    [2/2/2015 8:06:45 PM] [1] Processing component 'All Roles Common First - Run Once' (Configuring the server.).
    [2/2/2015 8:06:45 PM] [1] Executing 'if ($RoleProductPlatform -eq "amd64") { $watsonMSI = 'dw20sharedamd64.msi'; $watsonMSILogFileName = 'Installdw20sharedamd64.msilog'; } else { $watsonMSI = 'dw20shared.msi'; $watsonMSILogFileName = 'Installdw20shared.msilog';
    } install-MsiPackage -PackagePath ($RoleInstallPath + "bin\$watsonMSI") -LogFile ($RoleSetupLoggingPath + "\$watsonMSILogFileName") -UpdatesDir $RoleUpdatesDir -PropertyValues ("APPGUID=`"{24B2C164-DE66-44fe-B468-A46D9D5E6B31}`"
    LOGVERBOSE=1");', handleError = False
    [2/2/2015 8:06:45 PM] [2] Launching sub-task '$error.Clear(); if ($RoleProductPlatform -eq "amd64") { $watsonMSI = 'dw20sharedamd64.msi'; $watsonMSILogFileName = 'Installdw20sharedamd64.msilog'; } else { $watsonMSI = 'dw20shared.msi'; $watsonMSILogFileName
    = 'Installdw20shared.msilog'; } install-MsiPackage -PackagePath ($RoleInstallPath + "bin\$watsonMSI") -LogFile ($RoleSetupLoggingPath + "\$watsonMSILogFileName") -UpdatesDir $RoleUpdatesDir -PropertyValues ("APPGUID=`"{24B2C164-DE66-44fe-B468-A46D9D5E6B31}`"
    LOGVERBOSE=1");'.
    [2/2/2015 8:06:45 PM] [2] Beginning processing.
    [2/2/2015 8:06:45 PM] [2] ProductCode is '95120000-00b9-0409-1000-0000000ff1ce'.
    [2/2/2015 8:06:45 PM] [2] PackagePath was set to 'C:\Program Files\Microsoft\Exchange Server\bin\dw20sharedamd64.msi'; normalizing to 'C:\Program Files\Microsoft\Exchange Server\bin\dw20sharedamd64.msi'.
    [2/2/2015 8:06:45 PM] [2] ProductCode is '95120000-00b9-0409-1000-0000000ff1ce'.
    [2/2/2015 8:06:45 PM] [2] Installing MSI package 'C:\Program Files\Microsoft\Exchange Server\bin\dw20sharedamd64.msi'.
    [2/2/2015 8:06:47 PM] [2] Ending processing.
    [2/2/2015 8:06:47 PM] [1] Executing 'Set-InstallPathInAppConfig -ConfigFileRelativePath "Scripts\" -ConfigFileName "Exchange2007.xml" -ReplacementString "%ProgramFiles%\Microsoft\Exchange Server\";', handleError = False
    [2/2/2015 8:06:47 PM] [2] Launching sub-task '$error.Clear(); Set-InstallPathInAppConfig -ConfigFileRelativePath "Scripts\" -ConfigFileName "Exchange2007.xml" -ReplacementString "%ProgramFiles%\Microsoft\Exchange Server\";'.
    [2/2/2015 8:06:47 PM] [2] Beginning processing.
    [2/2/2015 8:06:47 PM] [2] Ending processing.
    [2/2/2015 8:06:47 PM] [1] Executing 'Remove-XmlNode -XmlFileRelativePath "Scripts\" -XmlFileName "Exchange2007.xml" -XmlNodeNameToRemove "_locDefinition";', handleError = False
    [2/2/2015 8:06:47 PM] [2] Launching sub-task '$error.Clear(); Remove-XmlNode -XmlFileRelativePath "Scripts\" -XmlFileName "Exchange2007.xml" -XmlNodeNameToRemove "_locDefinition";'.
    [2/2/2015 8:06:47 PM] [2] Beginning processing.
    [2/2/2015 8:06:47 PM] [2] ExchangeInstallPath = C:\Program Files\Microsoft\Exchange Server\, Relative Path = Scripts\, Xml Full File Path = C:\Program Files\Microsoft\Exchange Server\Scripts\Exchange2007.xml, Xml Node Name = _locDefinition
    [2/2/2015 8:06:47 PM] [2] Ending processing.
    [2/2/2015 8:06:47 PM] [1] Executing 'Set-InstallPathInAppConfig -ConfigFileRelativePath "Scripts\" -ConfigFileName "Exchange2007Edge.xml" -ReplacementString "%ProgramFiles%\Microsoft\Exchange Server\";', handleError = False
    [2/2/2015 8:06:47 PM] [2] Launching sub-task '$error.Clear(); Set-InstallPathInAppConfig -ConfigFileRelativePath "Scripts\" -ConfigFileName "Exchange2007Edge.xml" -ReplacementString "%ProgramFiles%\Microsoft\Exchange Server\";'.
    [2/2/2015 8:06:47 PM] [2] Beginning processing.
    [2/2/2015 8:06:47 PM] [2] Ending processing.
    [2/2/2015 8:06:47 PM] [1] Executing 'Remove-XmlNode -XmlFileRelativePath "Scripts\" -XmlFileName "Exchange2007Edge.xml" -XmlNodeNameToRemove "_locDefinition";', handleError = False
    [2/2/2015 8:06:47 PM] [2] Launching sub-task '$error.Clear(); Remove-XmlNode -XmlFileRelativePath "Scripts\" -XmlFileName "Exchange2007Edge.xml" -XmlNodeNameToRemove "_locDefinition";'.
    [2/2/2015 8:06:47 PM] [2] Beginning processing.
    [2/2/2015 8:06:47 PM] [2] ExchangeInstallPath = C:\Program Files\Microsoft\Exchange Server\, Relative Path = Scripts\, Xml Full File Path = C:\Program Files\Microsoft\Exchange Server\Scripts\Exchange2007Edge.xml, Xml Node Name = _locDefinition
    [2/2/2015 8:06:47 PM] [2] Ending processing.
    [2/2/2015 8:06:47 PM] [1] Executing 'Set-InstallPathInAppConfig -ConfigFileRelativePath "Scripts\" -ConfigFileName "Exchange2007_WinSrv2008.xml" -ReplacementString "%ProgramFiles%\Microsoft\Exchange Server\";', handleError = False
    [2/2/2015 8:06:47 PM] [2] Launching sub-task '$error.Clear(); Set-InstallPathInAppConfig -ConfigFileRelativePath "Scripts\" -ConfigFileName "Exchange2007_WinSrv2008.xml" -ReplacementString "%ProgramFiles%\Microsoft\Exchange Server\";'.
    [2/2/2015 8:06:47 PM] [2] Beginning processing.
    [2/2/2015 8:06:47 PM] [2] Ending processing.
    [2/2/2015 8:06:47 PM] [1] Executing 'Remove-XmlNode -XmlFileRelativePath "Scripts\" -XmlFileName "Exchange2007_WinSrv2008.xml" -XmlNodeNameToRemove "_locDefinition";', handleError = False
    [2/2/2015 8:06:47 PM] [2] Launching sub-task '$error.Clear(); Remove-XmlNode -XmlFileRelativePath "Scripts\" -XmlFileName "Exchange2007_WinSrv2008.xml" -XmlNodeNameToRemove "_locDefinition";'.
    [2/2/2015 8:06:47 PM] [2] Beginning processing.
    [2/2/2015 8:06:47 PM] [2] ExchangeInstallPath = C:\Program Files\Microsoft\Exchange Server\, Relative Path = Scripts\, Xml Full File Path = C:\Program Files\Microsoft\Exchange Server\Scripts\Exchange2007_WinSrv2008.xml, Xml Node Name = _locDefinition
    [2/2/2015 8:06:47 PM] [2] Ending processing.
    [2/2/2015 8:06:47 PM] [1] Executing 'Set-InstallPathInAppConfig -ConfigFileRelativePath "Scripts\" -ConfigFileName "Exchange2007Edge_WinSrv2008.xml" -ReplacementString "%ProgramFiles%\Microsoft\Exchange Server\";', handleError
    = False
    [2/2/2015 8:06:47 PM] [2] Launching sub-task '$error.Clear(); Set-InstallPathInAppConfig -ConfigFileRelativePath "Scripts\" -ConfigFileName "Exchange2007Edge_WinSrv2008.xml" -ReplacementString "%ProgramFiles%\Microsoft\Exchange Server\";'.
    [2/2/2015 8:06:47 PM] [2] Beginning processing.
    [2/2/2015 8:06:47 PM] [2] Ending processing.
    [2/2/2015 8:06:47 PM] [1] Executing 'Remove-XmlNode -XmlFileRelativePath "Scripts\" -XmlFileName "Exchange2007Edge_WinSrv2008.xml" -XmlNodeNameToRemove "_locDefinition";', handleError = False
    [2/2/2015 8:06:47 PM] [2] Launching sub-task '$error.Clear(); Remove-XmlNode -XmlFileRelativePath "Scripts\" -XmlFileName "Exchange2007Edge_WinSrv2008.xml" -XmlNodeNameToRemove "_locDefinition";'.
    [2/2/2015 8:06:47 PM] [2] Beginning processing.
    [2/2/2015 8:06:47 PM] [2] ExchangeInstallPath = C:\Program Files\Microsoft\Exchange Server\, Relative Path = Scripts\, Xml Full File Path = C:\Program Files\Microsoft\Exchange Server\Scripts\Exchange2007Edge_WinSrv2008.xml, Xml Node Name = _locDefinition
    [2/2/2015 8:06:47 PM] [2] Ending processing.
    [2/2/2015 8:06:47 PM] [1] Executing 'Set-WERRegistryMarkers;', handleError = False
    [2/2/2015 8:06:47 PM] [2] Launching sub-task '$error.Clear(); Set-WERRegistryMarkers;'.
    [2/2/2015 8:06:47 PM] [2] Beginning processing.
    [2/2/2015 8:06:47 PM] [2] Ending processing.
    [2/2/2015 8:06:47 PM] [1] Processing component 'All Roles Common First' (Creating the Exchange server configuration in the Active Directory).
    [2/2/2015 8:06:47 PM] [1] Executing '$RoleNames = $RoleRoles.Replace('Role','').Split(','); .\ServiceControl.ps1 EnableServices $RoleNames', handleError = False
    [2/2/2015 8:06:47 PM] [2] Launching sub-task '$error.Clear(); $RoleNames = $RoleRoles.Replace('Role','').Split(','); .\ServiceControl.ps1 EnableServices $RoleNames'.
    [2/2/2015 8:06:47 PM] [1] Executing 'Set-LocalPermissions', handleError = False
    [2/2/2015 8:06:47 PM] [2] Launching sub-task '$error.Clear(); Set-LocalPermissions'.
    [2/2/2015 8:06:47 PM] [2] Beginning processing.
    [2/2/2015 8:07:00 PM] [2] Ending processing.
    [2/2/2015 8:07:00 PM] [1] Executing 'get-service | where { $_.Name -ieq "HealthService" } | stop-service -Force:$true', handleError = False
    [2/2/2015 8:07:00 PM] [2] Launching sub-task '$error.Clear(); get-service | where { $_.Name -ieq "HealthService" } | stop-service -Force:$true'.
    [2/2/2015 8:07:00 PM] [1] Executing 'get-service | where { $_.Name -ieq "MOM" } | stop-service -Force:$true', handleError = False
    [2/2/2015 8:07:00 PM] [2] Launching sub-task '$error.Clear(); get-service | where { $_.Name -ieq "MOM" } | stop-service -Force:$true'.
    [2/2/2015 8:07:00 PM] [1] Executing 'get-service | where { $_.Name -ieq "OnePoint" } | stop-service -Force:$true', handleError = False
    [2/2/2015 8:07:00 PM] [2] Launching sub-task '$error.Clear(); get-service | where { $_.Name -ieq "OnePoint" } | stop-service -Force:$true'.
    [2/2/2015 8:07:00 PM] [1] Executing '$mofFilePath = ($RoleInstallPath + "bin\Exchange.MOF"); $mflFilePath = ($RoleInstallPath + "bin\Exchange.MFL"); compile-moffile -MofFilePath:$mofFilePath; compile-moffile -MofFilePath:$mflFilePath;',
    handleError = True
    [2/2/2015 8:07:00 PM] [2] Launching sub-task '$error.Clear(); $mofFilePath = ($RoleInstallPath + "bin\Exchange.MOF"); $mflFilePath = ($RoleInstallPath + "bin\Exchange.MFL"); compile-moffile -MofFilePath:$mofFilePath; compile-moffile
    -MofFilePath:$mflFilePath;'.
    [2/2/2015 8:07:00 PM] [2] Beginning processing.
    [2/2/2015 8:07:01 PM] [2] Exchange tracing provider was installed successfully.
    [2/2/2015 8:07:01 PM] [2] Ending processing.
    [2/2/2015 8:07:01 PM] [2] Beginning processing.
    [2/2/2015 8:07:01 PM] [2] Exchange tracing provider was installed successfully.
    [2/2/2015 8:07:01 PM] [2] Ending processing.
    [2/2/2015 8:07:01 PM] [1] Processing component 'All Roles Precompile Management Binaries' (Pre-compiling management binaries.).
    [2/2/2015 8:07:01 PM] [1] Executing '$fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\microsoft.Exchange.Rpc.dll"); precompile-ManagedBinary -BinaryName $fullPath;', handleError = False
    [2/2/2015 8:07:01 PM] [2] Launching sub-task '$error.Clear(); $fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\microsoft.Exchange.Rpc.dll"); precompile-ManagedBinary -BinaryName $fullPath;'.
    [2/2/2015 8:07:01 PM] [2] Beginning processing.
    [2/2/2015 8:07:01 PM] [2] Starting: C:\Windows\Microsoft.NET\Framework64\v2.0.50727\ngen.exe arguments: install "C:\Program Files\Microsoft\Exchange Server\bin\microsoft.Exchange.Rpc.dll" /verbose
    [2/2/2015 8:07:02 PM] [2] Process standard output: Microsoft (R) CLR Native Image Generator - Version 2.0.50727.4252
    Copyright (c) Microsoft Corporation.  All rights reserved.
    Installing assembly C:\Program Files\Microsoft\Exchange Server\bin\microsoft.Exchange.Rpc.dll
    All compilation targets are up to date.
    [2/2/2015 8:07:02 PM] [2] Process standard error: 
    [2/2/2015 8:07:02 PM] [2] Ending processing.
    [2/2/2015 8:07:02 PM] [1] Executing '$fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\microsoft.Exchange.Common.IL.dll"); precompile-ManagedBinary -BinaryName $fullPath;', handleError = False
    [2/2/2015 8:07:02 PM] [2] Launching sub-task '$error.Clear(); $fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\microsoft.Exchange.Common.IL.dll"); precompile-ManagedBinary -BinaryName $fullPath;'.
    [2/2/2015 8:07:02 PM] [2] Beginning processing.
    [2/2/2015 8:07:02 PM] [2] Starting: C:\Windows\Microsoft.NET\Framework64\v2.0.50727\ngen.exe arguments: install "C:\Program Files\Microsoft\Exchange Server\bin\microsoft.Exchange.Common.IL.dll" /verbose
    [2/2/2015 8:07:02 PM] [2] Process standard output: Microsoft (R) CLR Native Image Generator - Version 2.0.50727.4252
    Copyright (c) Microsoft Corporation.  All rights reserved.
    Installing assembly C:\Program Files\Microsoft\Exchange Server\bin\microsoft.Exchange.Common.IL.dll
    All compilation targets are up to date.
    [2/2/2015 8:07:02 PM] [2] Process standard error: 
    [2/2/2015 8:07:02 PM] [2] Ending processing.
    [2/2/2015 8:07:02 PM] [1] Executing '$fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\Microsoft.Exchange.Diagnostics.dll"); precompile-ManagedBinary -BinaryName $fullPath;', handleError = False
    [2/2/2015 8:07:02 PM] [2] Launching sub-task '$error.Clear(); $fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\Microsoft.Exchange.Diagnostics.dll"); precompile-ManagedBinary -BinaryName $fullPath;'.
    [2/2/2015 8:07:02 PM] [2] Beginning processing.
    [2/2/2015 8:07:02 PM] [2] Starting: C:\Windows\Microsoft.NET\Framework64\v2.0.50727\ngen.exe arguments: install "C:\Program Files\Microsoft\Exchange Server\bin\Microsoft.Exchange.Diagnostics.dll" /verbose
    [2/2/2015 8:07:02 PM] [2] Process standard output: Microsoft (R) CLR Native Image Generator - Version 2.0.50727.4252
    Copyright (c) Microsoft Corporation.  All rights reserved.
    Installing assembly C:\Program Files\Microsoft\Exchange Server\bin\Microsoft.Exchange.Diagnostics.dll
    All compilation targets are up to date.
    [2/2/2015 8:07:02 PM] [2] Process standard error: 
    [2/2/2015 8:07:02 PM] [2] Ending processing.
    [2/2/2015 8:07:02 PM] [1] Executing '$fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\Microsoft.Exchange.Common.dll"); precompile-ManagedBinary -BinaryName $fullPath;', handleError = False
    [2/2/2015 8:07:02 PM] [2] Launching sub-task '$error.Clear(); $fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\Microsoft.Exchange.Common.dll"); precompile-ManagedBinary -BinaryName $fullPath;'.
    [2/2/2015 8:07:02 PM] [2] Beginning processing.
    [2/2/2015 8:07:02 PM] [2] Starting: C:\Windows\Microsoft.NET\Framework64\v2.0.50727\ngen.exe arguments: install "C:\Program Files\Microsoft\Exchange Server\bin\Microsoft.Exchange.Common.dll" /verbose
    [2/2/2015 8:07:03 PM] [2] Process standard output: Microsoft (R) CLR Native Image Generator - Version 2.0.50727.4252
    Copyright (c) Microsoft Corporation.  All rights reserved.
    Installing assembly C:\Program Files\Microsoft\Exchange Server\bin\Microsoft.Exchange.Common.dll
    All compilation targets are up to date.
    [2/2/2015 8:07:03 PM] [2] Process standard error: 
    [2/2/2015 8:07:03 PM] [2] Ending processing.
    [2/2/2015 8:07:03 PM] [1] Executing '$fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\Microsoft.Exchange.Core.Strings.dll"); precompile-ManagedBinary -BinaryName $fullPath;', handleError = False
    [2/2/2015 8:07:03 PM] [2] Launching sub-task '$error.Clear(); $fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\Microsoft.Exchange.Core.Strings.dll"); precompile-ManagedBinary -BinaryName $fullPath;'.
    [2/2/2015 8:07:03 PM] [2] Beginning processing.
    [2/2/2015 8:07:03 PM] [2] Starting: C:\Windows\Microsoft.NET\Framework64\v2.0.50727\ngen.exe arguments: install "C:\Program Files\Microsoft\Exchange Server\bin\Microsoft.Exchange.Core.Strings.dll" /verbose
    [2/2/2015 8:07:03 PM] [2] Process standard output: Microsoft (R) CLR Native Image Generator - Version 2.0.50727.4252
    Copyright (c) Microsoft Corporation.  All rights reserved.
    Installing assembly C:\Program Files\Microsoft\Exchange Server\bin\Microsoft.Exchange.Core.Strings.dll
    All compilation targets are up to date.
    [2/2/2015 8:07:03 PM] [2] Process standard error: 
    [2/2/2015 8:07:03 PM] [2] Ending processing.
    [2/2/2015 8:07:03 PM] [1] Executing '$fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\Microsoft.Exchange.Net.dll"); precompile-ManagedBinary -BinaryName $fullPath;', handleError = False
    [2/2/2015 8:07:03 PM] [2] Launching sub-task '$error.Clear(); $fullPath = [System.IO.Path]::Combine($RoleInstallPath, "bin\Microsoft.Exchange.Net.dll"); precompile-ManagedBinary -BinaryName $fullPath;'.
    [2/2/2015 8:07:03 PM] [2] Beginning processing.
    [2/2/2015 8:07:03 PM] [2] Starting: C:\Windows\Microsoft.NET\Framework64\v2.0.50727\ngen.exe arguments: install "C:\Program Files\Microsoft\Exchange Server\bin\Microsoft.Exchange.Net.dll" /verbose
    [2/2/2015 8:07:04 PM] [2] Process standard output: Microsoft (R) CLR Native Image Generator - Version 2.0.50727.4252
    Copyright (c) Microsoft Corporation.  All rights reserved.
    Installing assembly C:\Program Files\Microsoft\Exchange Server\bin\Microsoft.Exchange.Net.dll
    All compilation targets are up to date.

  • Hybrid Deployment - Migrating from Exchange Online to On-Premise Exchange

    Hi,
    I'm migrating from Exchange Online to an 2013 On-Premise Exchange. 
    Hybrid Deployment has been set up and configured successfully. 
    However, I'm encountering issues while performing a mailbox migration to the on-premise server. 
    It's has been stuck at validating and reflecting a MigrationTranscientException Error. 
    Appreciate the valuable advise and suggestions! Thanks!
    Cheers!
    Joshua
    Error message below:
    Data migrated: 
    Migration rate: 
    Error: MigrationTransientException:
    The Mailbox Replication Service could not connect to the remote server because the remote server encountered an internal error. The call to ‎'https://mail.domain.com.sg/EWS/mrsproxy.svc‎' failed. Error details: The content type text/html; charset=utf-8 of
    the response message does not match the content type of the binding ‎(application/soap+xml; charset=utf-8)‎. If using a custom encoder, be sure that the IsContentTypeSupported method is implemented properly. The first 1024 bytes of the response were: ‎'<!DOCTYPE
    html> <html> <head> <title>Runtime Error</title> <meta name="viewport" content="width=device-width" /> <style> body {font-family:"Verdana";font-weight:normal;font-size: .7em;color:black;}
    p {font-family:"Verdana";font-weight:normal;color:black;margin-top: -5px} b {font-family:"Verdana";font-weight:bold;color:black;margin-top: -5px} H1 { font-family:"Verdana";font-weight:normal;font-size:18pt;color:red } H2 { font-family:"Verdana";font-weight:normal;font-size:14pt;color:maroon
    } pre {font-family:"Consolas","Lucida Console",Monospace;font-size:11pt;margin:0;padding:0.5em;line-height:14pt} .marker {font-weight: bold; color: black;text-decoration: none;} .version {color: gray;} .error {margin-bottom: 10px;} .expandable
    { text-decoration:underline; font-weight:bold; color:navy; cursor:hand; } @media screen and ‎(max-width: 639px)‎ { pre { width: 440px; o‎'. --> The remote server returned an error: ‎(500)‎ Internal Server Error.. --> The content type text/html; charset=utf-8
    of the response message does not match the content type of the binding ‎(application/soap+xml; charset=utf-8)‎. If using a custom encoder, be sure that the IsContentTypeSupported method is implemented properly. The first 1024 bytes of the response were:
    ‎'<!DOCTYPE html> <html> <head> <title>Runtime Error</title> <meta name="viewport" content="width=device-width" /> <style> body {font-family:"Verdana";font-weight:normal;font-size: .7em;color:black;}
    p {font-family:"Verdana";font-weight:normal;color:black;margin-top: -5px} b {font-family:"Verdana";font-weight:bold;color:black;margin-top: -5px} H1 { font-family:"Verdana";font-weight:normal;font-size:18pt;color:red } H2 { font-family:"Verdana";font-weight:normal;font-size:14pt;color:maroon
    } pre {font-family:"Consolas","Lucida Console",Monospace;font-size:11pt;margin:0;padding:0.5em;line-height:14pt} .marker {font-weight: bold; color: black;text-decoration: none;} .version {color: gray;} .error {margin-bottom: 10px;} .expandable
    { text-decoration:underline; font-weight:bold; color:navy; cursor:hand; } @media screen and ‎(max-width: 639px)‎ { pre { width: 440px; o‎'. --> The remote server returned an error: ‎(500)‎ Internal Server Error. --> The Mailbox Replication Service could
    not connect to the remote server because the remote server encountered an internal error. The call to ‎'https://mail.domain.com.sg/EWS/mrsproxy.svc‎' failed. Error details: The content type text/html; charset=utf-8 of the response message does not match the
    content type of the binding ‎(application/soap+xml; charset=utf-8)‎. If using a custom encoder, be sure that the IsContentTypeSupported method is implemented properly. The first 1024 bytes of the response were: ‎'<!DOCTYPE html> <html> <head>
    <title>Runtime Error</title> <meta name="viewport" content="width=device-width" /> <style> body {font-family:"Verdana";font-weight:normal;font-size: .7em;color:black;} p {font-family:"Verdana";font-weight:normal;color:black;margin-top:
    -5px} b {font-family:"Verdana";font-weight:bold;color:black;margin-top: -5px} H1 { font-family:"Verdana";font-weight:normal;font-size:18pt;color:red } H2 { font-family:"Verdana";font-weight:normal;font-size:14pt;color:maroon }
    pre {font-family:"Consolas","Lucida Console",Monospace;font-size:11pt;margin:0;padding:0.5em;line-height:14pt} .marker {font-weight: bold; color: black;text-decoration: none;} .version {color: gray;} .error {margin-bottom: 10px;} .expandable
    { text-decoration:underline; font-weight:bold; color:navy; cursor:hand; } @media screen and ‎(max-width: 639px)‎ { pre { width: 440px; o‎'. --> The remote server returned an error: ‎(500)‎ Internal Server Error.. --> The content type text/html; charset=utf-8
    of the response message does not match the content type of the binding ‎(application/soap+xml; charset=utf-8)‎. If using a custom encoder, be sure that the IsContentTypeSupported method is implemented properly. The first 1024 bytes of the response were:
    ‎'<!DOCTYPE html> <html> <head> <title>Runtime Error</title> <meta name="viewport" content="width=device-width" /> <style> body {font-family:"Verdana";font-weight:normal;font-size: .7em;color:black;}
    p {font-family:"Verdana";font-weight:normal;color:black;margin-top: -5px} b {font-family:"Verdana";font-weight:bold;color:black;margin-top: -5px} H1 { font-family:"Verdana";font-weight:normal;font-size:18pt;color:red } H2 { font-family:"Verdana";font-weight:normal;font-size:14pt;color:maroon
    } pre {font-family:"Consolas","Lucida Console",Monospace;font-size:11pt;margin:0;padding:0.5em;line-height:14pt} .marker {font-weight: bold; color: black;text-decoration: none;} .version {color: gray;} .error {margin-bottom: 10px;} .expandable
    { text-decoration:underline; font-weight:bold; color:navy; cursor:hand; } @media screen and ‎(max-width: 639px)‎ { pre { width: 440px; o‎'. --> The remote server returned an error: ‎(500)‎ Internal Server Error. --> The call to ‎'https://mail.domain.com.sg/EWS/mrsproxy.svc‎'
    failed. Error details: The content type text/html; charset=utf-8 of the response message does not match the content type of the binding ‎(application/soap+xml; charset=utf-8)‎. If using a custom encoder, be sure that the IsContentTypeSupported method is
    implemented properly. The first 1024 bytes of the response were: ‎'<!DOCTYPE html> <html> <head> <title>Runtime Error</title> <meta name="viewport" content="width=device-width" /> <style> body {font-family:"Verdana";font-weight:normal;font-size:
    .7em;color:black;} p {font-family:"Verdana";font-weight:normal;color:black;margin-top: -5px} b {font-family:"Verdana";font-weight:bold;color:black;margin-top: -5px} H1 { font-family:"Verdana";font-weight:normal;font-size:18pt;color:red
    } H2 { font-family:"Verdana";font-weight:normal;font-size:14pt;color:maroon } pre {font-family:"Consolas","Lucida Console",Monospace;font-size:11pt;margin:0;padding:0.5em;line-height:14pt} .marker {font-weight: bold; color: black;text-decoration:
    none;} .version {color: gray;} .error {margin-bottom: 10px;} .expandable { text-decoration:underline; font-weight:bold; color:navy; cursor:hand; } @media screen and ‎(max-width: 639px)‎ { pre { width: 440px; o‎'. --> The remote server returned an error:
    ‎(500)‎ Internal Server Error.. --> The content type text/html; charset=utf-8 of the response message does not match the content type of the binding ‎(application/soap+xml; charset=utf-8)‎. If using a custom encoder, be sure that the IsContentTypeSupported
    method is implemented properly. The first 1024 bytes of the response were: ‎'<!DOCTYPE html> <html> <head> <title>Runtime Error</title> <meta name="viewport" content="width=device-width" /> <style>
    body {font-family:"Verdana";font-weight:normal;font-size: .7em;color:black;} p {font-family:"Verdana";font-weight:normal;color:black;margin-top: -5px} b {font-family:"Verdana";font-weight:bold;color:black;margin-top: -5px} H1
    { font-family:"Verdana";font-weight:normal;font-size:18pt;color:red } H2 { font-family:"Verdana";font-weight:normal;font-size:14pt;color:maroon } pre {font-family:"Consolas","Lucida Console",Monospace;font-size:11pt;margin:0;padding:0.5em;line-height:14pt}
    .marker {font-weight: bold; color: black;text-decoration: none;} .version {color: gray;} .error {margin-bottom: 10px;} .expandable { text-decoration:underline; font-weight:bold; color:navy; cursor:hand; } @media screen and ‎(max-width: 639px)‎ { pre { width:
    440px; o‎'. --> The remote server returned an error: ‎(500)‎ Internal Server Error

    Hello Joshywahcho ,<o:p></o:p>
    First Check  is the MRS proxy is enabled or not and restart the Microsoft Exchange Mailbox Replication service and
    IIS on Hybrid .<o:p></o:p>
    As now Microsoft has change the procedure to roll back the mailbox from O365, please follow the below mention Step<o:p></o:p>
    Moved the affected user's mailbox to the Hybrid Server from Office 365 <o:p></o:p>
    Connect to Exchange Online using remote PowerShell<o:p></o:p>
    Ran the command
    $Credentials = Get-Credential<o:p></o:p>
    Ran the command
    New-MoveRequest -identity <e-mail address of the affected user> -OutBound -RemoteTargetDatabase "Name of the Datbase" -RemoteHostName <Your Host Name> -RemoteCredential $Credentials -TargetDeliveryDomain <Your Target Delivery Domain><o:p></o:p>
    Ran the command
    Get-MoveRequest -Identity <e-mail address of the user> to check the status of mailbox move<o:p></o:p>
    once the mailbox move from Office 365 to Hybrid Server was completed then initiated a Mailbox move from the Hybrid Server to On-premise server <o:p></o:p>
    Mailbox was moved successfully from Hybrid Server to the On-premise server .<o:p></o:p>
    checked in the On-premise server 2007 and the affected user's mailbox was showing there<o:p></o:p>

  • Getting error when I try to remove eum secondary email address from the Mailbox from Exchange 2013 server

    Getting error when I try to remove eum secondary email address from the Mailbox from Exchange 2013 server. The command works if you issue directly from the server exchange shell.
    I open the remote power shell to the exchange server 2013.
    Issue the following commands and getting the following error.
    $mailbox = Get-Mailbox -Identity testuser$mailbox.EmailAddresses -= "eum:50004;phone-context=telExt5digits.lync5.com"Then getting the following error:Method invocation failed because [System.Collections.ArrayList] doesn't contain a method named 'op_Subtraction'.
    At line:1 char:27
    + $mailbox.EmailAddresses -= <<<<  "eum:50004;phone-context=telExt5digits.lync5.com"
        + CategoryInfo          : InvalidOperation: (op_Subtraction:String) [], RuntimeException
        + FullyQualifiedErrorId : MethodNotFoundHelp!

    Now for an answer - your remote session doesn't have the same object you have on the server itself.  Notice it says this is an array list, not a ProxyAddressCollection.  If you need to work around this, you'll need to massage the addresses another
    way that the system will accept.  I'd try the following:
    $NewAddresses = $mailboxEmailAddresses | ? { $_ -notlike "eum:50004;phone-context=telExt5digits.lync5.com" }
    See what you get in the $NewAddresses variable when you do this.

  • Upgrading from Exchange 2013 CU1 to CU2

    1 : Upgrading from Exchange 2013 CU1 to CU2
    ================================================================
    "Unable to remove product with code 4934d1ea-be46-48b1-8847-f1af20e892c1.
    Fatal error during installation. Error code is 1603. Last error reported by the MSI package is 'Service 'Tracing Service for Search in Exchange ' (SearchExchangeTracing) could not be stopped. 
    Verify that you have the correct permissions to stop system services.'."
    ================================================================

    Hi,
    According to the error message, it is highly likely caused by insufficient permission.
    Please verify that your user account is member of Exchange administrators group and not limit by RBAC, than try again to see if this works.
    If the issue continues, run the command below to uninstall the product:
    msiexec.exe /X {code 4934d1ea-be46-48b1-8847-f1af20e892c1}
    Msiexec (command-line options):
    http://technet.microsoft.com/en-us/library/cc759262(v=ws.10).aspx
    If you have any question, please feel free to let me know.
    Thanks,
    Angela
    Angela Shi
    TechNet Community Support

  • My broadband line is used when i want to make free...

    My landline number is working and i can receive incoming calls but when i want to make calls from that number using my free evening and weekend package i cant, it always diverts to my broadband number so i'm paying ?
    I think its probably a connection / set up problem, i've got a bt home hub and use that handset, with a 2nd handset thats not connected to a phone socket
    Any ideas?

    i had the same problem for just over a month i was being charged for calls when i had the unlimited option i rang bt several times to find out why this was and not a single person told me the problem.
    Originally i had a fault and couldnt recive any incomming or out going calls so i rang bt on my mobile.  They fixed the incomming calls but still couldnt make out going calls so i rang them again and again this was fixed .... i noticed the dial tone had changed so again i rang no one offered me any explanation as to why the dial tone had changed they were simply more than happy that i was making and reciving calls.
    Then my bill arrived WOW what a shock no calls were free!!! So  again i rang i got a sorry and my bill re funded but still i hear the unusal tone.  So i  ring again the people over in the call centre in india didn't know what the problem was and left me to it again!
    Another bill came and yet again i was charged so i sent an email this time again they didnt know the problem.
    I rang again and this time got a woman with an irish accent who told me i was making calls from my broadband line i said i didnt request this and i certainly dont want it.  she told me to press 5 on the phone that will take it away and it was MY FAULT  i was being charged and i would not be reciveing a refund on my bill,  in fact she was rather nasty again excellent customer service on behalf of bt.
    So my advice to you is get rid of braodband talk and make sure u have pressed 5 on your hub phone and hear the normal dialing tone.

  • 48dB from exchange but only 1.2Mbps connection???

    Hi all,
      This one is a little frustrating for us. We've just move from a similar situation where we had download speeds of around 5Mbps to a house where it's now only 1.2Mbps.
      What I've done so far:
      Plugged the phone and broadband into the test socket.
      Done a quiet line test; all good to the point I wasn't sure it was actually connected until it said "quiet line test"
      Swapped microfilters, just to be sure.
    Done the BT wholesale check:
      Download speedachieved during the test was - 1.22 Mbps
     For your connection, the acceptable range of speeds is 0.4 Mbps-2 Mbps.
     Additional Information:
     Your DSL Connection Rate :2.02 Mbps(DOWN-STREAM), 0.45 Mbps(UP-STREAM)
     IP Profile for your line is - 1.25 Mbps
    Here's the line from the event log
    11:29:59, 17 Oct.
    DSL Link Up: Down Rate=2016Kbps, Up Rate=448Kbps; SNR Margin Down=15.3dB, Up=18.0dB
    I'm on a Home Hub 4:
    Firmware version: v0.07.00.1729-BT (Type B)
    Last updated 15/8/2014
    Board version:01A 
    Data Rate: 448 / 2016
    Maximum Data Rate: 916 / 2236
    Noise Margin: 18.0 / 15.4
    Line Attenuation: 30.5 / 48.0
    Signal Attenuation: 0.0 / 48.0
    Data sent/received: 3.0 MB / 10.1 MB
    This was the hub I had in the old house, so it's unlikely to be that. I've just had to restart the connection but that was to check the test socket.
    Any ides folks or is it worth a gamble on that £129 engineeri visit????
    Thanks guys
    Matt

    Hi Matthew_R,
    Welcome to the forum.
    Certainly looks like your SNRm is driving down your sync speed.  Imjolly is right, the connection is stable so we could move to resetting your SNRm back to the target of 6dB.  That should then get your speeds back to where you would expect.
    Please send me an email and I will sort this out.  Click on my username (SeanD) and you will find the 'Mods contact link' under the 'About me' section on my profile.  Once we pick up your email and reset the noise margin the change takes affect almost immeditaely 
    Cheers
    Sean
    BTCare Community Manager
    If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
    We are sorry that we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)

  • TS3899 Sending a meeting invite from Exchange 2007 account located in Central Time from Outlook 2010 Email Client located in Eastern Time cause meeting to show up 1 hour early on iPhone

    Sending a meeting invite from Exchange 2007 account located in Central Time from Outlook 2010 Email Client located in Eastern Time cause meeting to show up 1 hour early on iPhone.

    The meeting invite is being sent from a Computer through the Outlook 2010 Email Client. Both Computer and Outlook 2010 are set to Eastern Time. The OWA (Outlook Web Access) for the 2007 account is set to Eastern Time. The Outlook 2010 Email Client is connected to an Exchange 2007 account and the Exchange server for the exchange 2007 account is located in Chicago (Central Time) and is set to Central Time. When the meeting invite is sent from the Outlook 2010 Client the recipient receives the invite on his/her iPhone(set and located in the Eastern Time Zone) and a mime-attachment.ics file is attached to the meeting invite email. There is no info displayed in the subject line or message body. If the iPhone user opens the attachment it displays the meeting date and time and any other info that was sent from Outlook. The Outlook 2010 user sets the meeting for 10:00am to 11:00am. when the meeting invite mime-attachment.ics file is opened on the iPhone the meeting is displayed as 9:00am to 10:00am. if the iPhone user adds the ics file to his/her calendar it adds a meeting event that is scheduled 1 hour earlier than it is supposed to be. I had the iPhone user to set Time Zone support on and off and there is no change.

  • BroadBand Speed / Farningham Exchange

    Can someone help and let me know if my speed is correct or not or can be improved.
    I had BT Broadband for over a year now and never get speed above 1.05Mb, For a Whole year it was on 0.5mb
    BT Wholesale states
    Exchange FARNINGHAM
    Your exchange is ADSL enabled, and our initial test on your line indicates that your line should be able to have an ADSL broadband service that provides a fixed line speed up to 1Mbps. However due to the length of your line the 1Mbps service may require an engineer visit who will, where possible, supply the broadband service.
    Our test also indicates that your line currently supports an estimated ADSL Max broadband line speed of 2Mbps; typically the line speed would range between 1Mbps and 3Mbps.
    Our test also indicates that your line currently supports an estimated ADSL2+ broadband line speed of 2.5Mbps; typically the line speed would range between 1Mbps and 4Mbps. Our test also indicates that your line could support an estimated ADSL 2+ Annex-M broadband upstream line speed of 500Kbps and downstream line speed of 2.5Mbps; typically the downstream speed would range between 1Mbps and 4Mbps.
    The actual stable line speed supportable will be determined during the first 10 days of use. This speed may change over time, to ensure line stability is maintained.
    If you decide to place an order, a further test will be performed to confirm if your line is suitable for the service you wish to purchase.
    Thank you for your interest.
    My Router States I know SNR is high at the moment as i have been rebooting the router.
    Status: ShowtimeRetrain Reason: 8000
    Channel: FAST, Upstream rate = 801 Kbps, Downstream rate = 1024 Kbps
    Link Power State: L0
    Mode: ADSL2
    Channel: Fast
    Trellis: UN /DN
    Line Status: No Defect
    Training Status: Showtime
    Down Up
    SNR (dB): 9.3 6.0
    Attn(dB): 61.0 39.8
    Pwr(dBm): 0.0 12.7
    Max(Kbps): 1408 808
    Rate (Kbps): 1024 801
    G.dmt framing
    K: 33(0) 15
    R: 10 8
    S: 4 16
    D: 8 2
    ADSL2 framing
    MSGc: 59 11
    B: 32 14
    M: 4 16
    T: 1 7
    R: 10 8
    S: 4.0000 9.4928
    L: 284 209
    D: 8 2
    Counters
    SF: 36169 34553
    SFErr(CRCErr): 8 0
    RS: 587750 247301
    RSCorr: 98 0
    RSUnCorr: 54 0
    HEC: 7 0
    OCD: 1 0
    LCD: 0 0
    Total Cells: 1418532 1110190
    Data Cells: 145399 26340
    Drop Cells: 0
    Bit Errors: 0 0
    ES: 222394 28
    SES: 27742 0
    UAS: 186 0
    AS(Uptime): 588
    INP: 1.12 0.30
    PER: 16.25 17.65
    delay: 8.00 4.74
    OR: 32.00 7.70
    Bitswap: 113 61
    Total uptime: 276742
    BT Speed Checker States
    Im on 1.05mb download profile.
    I have no phone connected, Just the broadband router with a good ADSL filter, Ive raised calls with BT before but they seem just to get closed. 
    I think i should be able to get at least 2MB Download Speed without dropout but i think the IP Profile is stuck, The last BT Call on the telephone was they could not change the profile on the phone and a engineer would have to look at the exchange.
    Can someone please help
    Neil

    FAQ
     Download speedachieved during the test was - 0.71 Mbps
     For your connection, the acceptable range of speeds is 0.4 Mbps-1 Mbps.
     IP Profile for your line is - 0.91 Mbps
    Upload speed achieved during the test was - 0.66Mbps
     Additional Information:
     Upstream Rate IP profile on your line is - 0.83 Mbps

Maybe you are looking for

  • IOS 8 Calendar : Time to leave / travel time alert does not show

    iPhone User Guide: For iOS 8.1 Software Calendar at a glance: pg. 78 "Add an event. Tap  +, then fill in the event details.  If you add a location and choose Alert > Time to leave, Calendar reminds you of the event based on the current travel time to

  • Change taxcode in local PO using BBP_DET_TAXCODE_BADI

    Hello Gurus, We are in SRM7.0 extended classic scenario, we want to change the default tax code while creating a local PO and want the new tax code to be displayed in local PO. We have implemented BADI "BBP_DET_TAXCODE_BADI" and changing the tax code

  • AirPort is on and everything is conected but nothing is happening?

    Trying to play speakers and print but nothing is happening. Just need a little help with this Express. All software has been down loaded. It's telling me the airport is on and I'm conected to my wireless hub in the office. When I open itunes the bar

  • Help with the date field!!! in opportunity

    hello friends!!!! I have a requirement that in opportunity tab milestone we have created date profile with 4 different date types and position them to milestone tab in opportunity header data. Now the issue is out these 4, 2 of them we wish to have a

  • My Clipping Path isn't working? Please help...

    I am working in Photoshop CS4 on Mac. I have followed the steps below to create a clipping path: * Opened image that I want to add a clipping path to * Selected the part of the image that I wanted to clip (with the eliptical marquee tool) * On the Pa