BT broadband (not infinity) and the package with M...

Can i get MTV without having infinity? I dont really need infinity but would like MTV and have looked so many times and tried different ways to add it but can not figure it out
It says i can add it then when i try it it says nothing more about it

Without Infinity, no you can't.

Similar Messages

  • My imac and ipad2 will not connect to the internet with Windstream using an 2wire DSL modem.

    Help my brand new imac and ipad2 will not connect to the internet with Windstream using an "2WIRE" DSL modem.  Windstream tech service is useless.  i can connect with the built in router through Ethernet or wireless, but still no connecting to internet, help!  windstream said everything is working on their end, yea right.  What i do know is that both the mac and ipad work at other places and can connect with wireless connected to the internet, so i know it's not the apple products. 
    these are brand new machines with lion.
    This is my first mac, so I’m still new to how it works, which is not helping either so a detailed help would be great.  Please help before my wife losses it
    thanks

    There is a 2701HG-B, and a 2701HG-D.  If not labelled on the modem, ask Windstream which one they presently supply or how to tell the difference.
    By the way tell your wife it isn't that bad.  At least you have an ethernet DSL modem.  There were times where DSL modems had RJ-11, USB, and Ethernet, and all three were used to provide access.  At least now only the craziest DSL providers still use those modems.

  • I have a MacBook Pro 15" and my warranty just ran out! I partitioned my harddrive into two partitions, one with Snow Leopard and the other with microsoft.This morning I turned on my Macbook Pro and it will not boot into Snow Leopard.

    Good Morning,
    I have a MacBook Pro 15" and my warranty just ran out! I partitioned my harddrive into two partitions, one with Snow Leopard and the other with microsoft.This morning I turned on my Macbook Pro and it will not boot into Snow Leopard. I shut it off took out the battery, reinstalled the battery. Then I put in the Snow Leopard CD and booted up to disk utility and The Snow Leopard partion would not show up?? I do see the microsoft partion.
    I also rebooted holding down the shift key and still no Snow Leopard
    Could you please tell me what I can do, what keys do I press on restart any advice to get Snow leopard back.
    thank you.

    Have you restarted holding down the Opt key?  That procedure should give you a gray screen with all of the partitions that exist.  Then select the SL partition for boot.  Also go to System Preferences and Startup Disk, unlock the lock and select the SL partition as the default boot partition, then relock.

  • I made a card using the iPhoto and when I click to buy it, it says that I did not fill all the frames with pictures, even though I did and have checked multiple times. Please help, it's for Mother's Day.

    I made a card using the iPhoto and when I click to buy it, it says that I did not fill all the frames with pictures and that I need to in order to purchase it, even though I did and have checked multiple times. Please help, it's for Mother's Day.

    Before ordering your book preview it using this method - http://support.apple.com/kb/HT1040 - and save the resulting PDF for reference - the delivered book will match it.
    LN

  • I dont know my security questions and the email with those questione is not correct

    i dont know my security questions and the email with those questione is not correct

    I would contact Apple ID Support.
    Apple ID Support

  • I was re-naming a folder with many sub folders suddenly Thunderbird did not respond and the folder and sub folders I was re-naming disappeared.

    I was re-naming a folder with many sub folders attached, suddenly, Thunderbird did not respond and the folder I was re-naming disappeared along with all the sub folders attached to it. How can I get them back? I am not a computer savvy person. Any help would be greatly appreciated.
    Thank you.
    [email protected]

    Turned out that my anti-virus was doing a scheduled scan and had found a virus in an email attachment in my deleted items folder, thus nothing being able to do during the scan.

  • OXS server 3 with mavericks, it will not load up the assistant with open directory and will not allow me to use old open directory it was not a clean install just upgrade. any help or advise appreciated as i really need the server.

    OXS server 3 with mavericks, it will not load up the assistant with open directory and will not allow me to use old opeopen directory and will not allow me to use old open directory it was not a clean install just upgrade. any help or advise appreciated as i really need the server.

    I wonder if the disk being referred to is actually your iPod which is not plugged in. Maybe something has stuck thinking the iPod should be there.
    Try completely removing all the iTunes related programs according to this method.
    http://support.apple.com/kb/HT1923
    Restart you PC and see if startup improves.
    If it doesn't improve you need to consider the possibility that there is something else going on.
    If The problem goes away, hopefully a fresh install will be OK.

  • G4 just replaced power supply , it powers up , but the screen is not on and the mouse and keyboard aren't on either. A few times the computer came on with screen working but then it froze up, can't do any type of reset cause of keyboard not working. Help!

    G4 just replaced power supply , it powers up , but the screen is not on and the mouse and keyboard aren't on either. A few times the computer came on with screen working but then it froze up, can't do any type of reset cause of keyboard not working. Help! Pressed pmu button already,  nothing ,..  Ppc g4 Mac

    Should I check the memory cards themselves? Reseat them?
    Yes.
    Memtest X or Rember to test the RAM.
    Reseat is also good.
    The iPhone 4 doesn't like USB 1.1 much.
    after the update the computer was working well, except for this freeze when ever I connect iPhone.
    I'd try USB 2.0 PCI. That's how I connect my iPhone 4s, and have connected all iPhones and iPods, to my G4.
    Never an issue.
    Can't say the same for USB 1.1.......
    The above (previous post) linked PCI card is cheap enough.
    Want cheaper, try this:
    http://www.amazon.com/Protronix®-5-Port-Controller-Card-Chipset/dp/B005JE2U82/re f=sr_1_2?ie=UTF8&qid=1337472141&sr=8-2
    The NEC chipset is the desired chipset, regardless of what OS the maker says is compatible.
    OS X has native NEC chipset USB support.

  • My problem is a sudden loss of ability to get to PSE12 Organizer when I tried to load a saved scan. Had been using the Organizer and the Editor with no problems for several hours just before that.     Can not load the Organizer from the icon at the bottom

    My problem is a sudden loss of ability to get to PSE12 Organizer when I tried to load a saved scan. Had been using the Organizer and the Editor with no problems for several hours just before that.  
    Can not load the Organizer from the icon at the bottom of  Editor screen, from the icon on the MacBook Air dock (OS 10.10.2),  nor from the file in applications located with Finder.
    I have tried without success to access Organizer after turning off and on the scanner, turning off and on the computer, loading a fresh copy of PSE12 from the CD, and restoring default preferences.  I have searched on line for other options but not  found any. 
    Can you help me?

    Not Charge
    - See:    
    iPod touch: Hardware troubleshooting
    iPhone and iPod touch: Charging the battery
    - Try another cable. The cable for 5G iPod (lightning connector) seems to be more prone to failure than the older cable.
    - If a 5G iPod               
    Iphone 5 lightning port charging problem - SOLUTION!
    - Try another charging source
    - Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
    - Make an appointment at the Genius Bar of an Apple store.
      Apple Retail Store - Genius Bar

  • HT1386 Why when I select not to update the calendar with any entry older than 1 day it ignors that and goes back as far as my calendar has entries

    Why when I select not to update the calendar with any entry older than 1 day it ignors that and goes back as far as my calendar has entries

    FCPx answer: At least the answer that worked for me...
    I had the same problem, as I believe many others had.
    In my case the problem was with one of OSX Mavericks' new features: APP NAP.
    It looks like this is ON by DEFAULT for ALL Applications and that FCPx, or Compressor for that matter, will not work if this is enabled on them.
    I just disabled App Napp on FCPx and now it works, again, like a charm.
    This is how you disable App Nap: http://reviews.cnet.com/8301-13727_7-57612009-263/how-to-disable-app-nap-in-os-x -mavericks/
    I hope this helps,
    Mariano

  • My new macbook air and new thunderbolt monitor will not work together. the keyboard will not engage and the monitor screen keeps going black. is it a problem with the monitor, connection, laptop?

    my new macbook air and new thunderbolt monitor will not work together. the keyboard will not engage and the monitor screen keeps going black. is it a problem with the monitor, connection, laptop?

    A new Mac comes with 90 days of free tech support from AppleCare.
    AppleCare: 1-800-275-2273
    Call AppleCare. They will help you.
    Best.

  • The ipad mini and the ipad with retina display can not use the app store

    i just got the ipad mini and the ipad with retina display but i can't use the app store on those two

    For information on your iPad (model, date of production, etc) then enter your serial number at this site. Information, based on the serial number, will be shown.  http://www.chipmunk.nl/klantenservice/applemodel.html
    Identifying iPad models
    http://support.apple.com/kb/HT5452?viewlocale=en_US&locale=en_US
     Cheers, Tom

  • Error with Project Parameters when executing the package with dtexec command

    Hi,
    We have started migrating our SSIS package from 2005 version to SSIS 2012. In SSIS 2005 we were using XML configuration files and executing the packages with dtexec command from the packages folder (without deploying packages to filesystem).
    Now in SSIS 2012, we have seen Project Parameters and created couple of package parameters and used those parameters in the package. when executing this package from solution explorer it was working fine but when i try to execute the same package from command
    line with Dtexec command, it was showing an error message of 'Not able to map Project Prameters to configurations'.
    Could you please give me an idea of how to execute the packages from command line by using dtexex command. basically i would like use project parameters in 2012 similar to configurations?
    Thanks,
    Venu.

    Refer
    http://msdn.microsoft.com/en-IN/library/hh231187.aspx
    you can pass parameter like this
    /SET \Package.Variables[$Package::ParameterName];<value> /SET \Package.Variables[$Project::ParameterName];<value>
    Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

  • [svn:fx-trunk] 12936: -make sure the bundles directory for airspark is not included in the package fixes bug SDK-24552

    Revision: 12936
    Revision: 12936
    Author:   [email protected]
    Date:     2009-12-14 19:40:23 -0800 (Mon, 14 Dec 2009)
    Log Message:
    -make sure the bundles directory for airspark is not included in the package fixes bug SDK-24552
    -remove (from svn) the en_US/docs directories for textLayout because these directories and dita files are created by asdoc in the doc target
    -updated the main build.xml to not include the playerglobal project
    -updated fat-swc targets in osmf,automation_spark,automation_flashflexkit,automation,airspark, and textlayout to remove the doc directory.
    QE notes: make sure copylocales works properly
    Doc notes: no
    Bugs: SDK-24552
    Reviewer:
    Tests run: checkintests
    Is noteworthy for integration: no
    Ticket Links:
        http://bugs.adobe.com/jira/browse/SDK-24552
        http://bugs.adobe.com/jira/browse/SDK-24552
    Modified Paths:
        flex/sdk/trunk/build.xml
        flex/sdk/trunk/frameworks/projects/airspark/build.xml
        flex/sdk/trunk/frameworks/projects/automation/build.xml
        flex/sdk/trunk/frameworks/projects/automation_flashflexkit/build.xml
        flex/sdk/trunk/frameworks/projects/automation_spark/build.xml
        flex/sdk/trunk/frameworks/projects/osmf/build.xml
        flex/sdk/trunk/frameworks/projects/textLayout/build.xml
    Removed Paths:
        flex/sdk/trunk/frameworks/projects/airframework/bundles/en_US/docs/
        flex/sdk/trunk/frameworks/projects/automation/bundles/en_US/docs/
        flex/sdk/trunk/frameworks/projects/automation_flashflexkit/bundles/en_US/docs/
        flex/sdk/trunk/frameworks/projects/automation_spark/bundles/en_US/docs/
        flex/sdk/trunk/frameworks/projects/framework/bundles/en_US/docs/
        flex/sdk/trunk/frameworks/projects/rpc/bundles/en_US/docs/
        flex/sdk/trunk/frameworks/projects/textLayout/bundles/en_US/docs/

    Well, I've tried compiling a package and I have modified the PKGBUILD file to look like this now. (Keeping it as simple as possible)
    pkgname=dvbcut-svn
    pkgver=16
    pkgrel=1
    pkgdesc="DVBCUT-svn is an application that allows you to
    edit MPEG files. ie: Remove TV ads. (SVN version: Fri, 01 Dec 2006)."
    url="http://dvbcut.sourceforge.net"
    depends=('qt' 'libao')
    makedepends=('subversion' 'scons')
    conflicts=('dvbcut' 'ffmpeg')
    provides=('dvbcut')
    source=()
    md5sums=()
    _svntrunk=https://svn.sourceforge.net/svnroot/dvbcut/trunk
    _svnmod=dvbcut
    build() {
    cd $startdir/src
    svn co $_svntrunk --config-dir ./ -r $pkgver $_svnmod
    cd $_svnmod
    msg "SVN checkout done or server timeout"
    msg "Starting make..."
    make || return 1
    # vim:syntax=sh
    I then run makepkg PKGBUILD and let it do its thing
    It ends with this...
    scons: done building targets.
    ==> Removing info/doc files...
    ==> Compressing man pages...
    ==> Stripping debugging symbols from libraries...
    ==> Stripping symbols from binaries...
    ==> Generating .PKGINFO file...
    ==> Generating .FILELIST file...
    tar: *: Cannot stat: No such file or directory
    tar: Error exit delayed from previous errors
    ==> Compressing package...
    tar: *: Cannot stat: No such file or directory
    tar: Error exit delayed from previous errors
    ==> Finished making: dvbcut-svn  (Sun Jan 21 19:08:28 UTC 2007)
    I'm not sure what's causing this error message.
    tar: *: Cannot stat: No such file or directory
    tar: Error exit delayed from previous errors
    I'll try installing it and see how it goes.

  • Bought iphone 5C on December. No additional warranty purchased. The phone keeps not working and the top and bottom right corners look melted. Can I send it in amd get a new one on manufacturer warranty? Or what are my options? Thanks

    I Purchased iphone 5C on December 2014. However now it's very difficult to have it working. The screen is constantly not working and the right side bottom&top does looks like its melted? the cover I mean , which maked the phone slide out of its cover. I did not purchase anny additional warranty or insurance so I don't know what to do with it? Can i send it in and they can send me a new one under the manufacturer warranty or what do i do with it?
    I Have alwa had an iphone but this 5c is making me never have one again. Thanks in advance

    Each iPhone comes with a one-year warranty. You said it looks melted? That's going to be difficult to prove that you did not damage it, and it happened on its own. That is the only way it would be covered.

Maybe you are looking for