BT Broadband Phone how to switch on in router

my blue light use to be on on my home hub for phone, its now out, when i go in to hub it says not activate on hub then a box says try to fix click here, so i do, it then tells me to press restart button on hub, which i do, i then click box to activate and here we go again, press restart button, am going round in circles, is is because i am only getting 0.01meg speed

3. Reactivate Broadband Talk
Type www.bt.com/bbvinto your browser and hit enter.
Type in your Broadband Talk (BBT) phone number .
Type in your BBT password which was emailed to you when you signed up.
Click on NextClick on Configure Hub/RouterClick on Configure. Only click on it once, have patience!
In a few minutes the BBT light should come on.
Shortcut:If you want a shortcut to this you can do the following:-
Enter www.bt.com/bbt in your browser.
Input your BB Talk number and BB Talk password.
Click "Next"
Click on Configure hub/router
This is where Firefox comes into its own because of the enhanced Right-click functionality

Similar Messages

  • Hello my brother just switched from android to iPhone yesterday but in my contacts it still shows that he has his old phone how can I switch it to where I can text him through iMessage?

    Hello my brother just switched from android to iPhone yesterday but in my contacts it still shows that he has his old phone how can I switch it to where I can text him through iMessage?

    He has to turn on iMessgae on his iPhone.
    Settings > Messages > Turn on iMessage

  • HT201436 I have an iPhone 4s and have set up with my provider for voicemail. however, when called my phone does not switch to voicemail. How do I set the phone to transfer to voicemail when not answered etc?

    I have an iPhone 4s and have set up with my provider for voicemail. however, when called my phone does not switch to voicemail. How do I set the phone to transfer to voicemail when not answered etc?

    Voicemail is a carrier feature, not a phone feature. This has to be fixed by your carrier, so contact them, as obviously, voicemail is not properly provisioned on your account.

  • How can I stop broadband phone ringing with landli...

    If you call the broadband number only the broadband phone rings - which is what I want.
    But when you call my landline number both the landline phone and the broadband phones ring. I want just the landline phone to ring when you call the landline number.
    In the settings section of the Hub Manager, for phone sockets it only has two options to choose from:
    - BT Broadband Talk only
    - BT Broadband Talk and landline
    I need one that says "landline only" but there isn't one!
    What do I need to do so only the landline rings when the landline number is dialled?
    Thanks
    Solved!
    Go to Solution.

    Hi alantragen and welcome
    You need to change thsi via the hub manager
    Enter http://bthomehub.home/ into your browesr.
    Click settings (you will need to either change the default admin password (if it's the first time you've accessed it) or input the one you've already chosen)).
    Nativgate to Telephones.
    The menu is as displayed in the first post.
    -+-No longer a forum member-+-

  • How to switch from Bonjour to iMessage

    My iChat has changed from message to Bonjour.  I don't use Bonjour and I don't know how to change it back to message.  Please help. Steven

    your response doesn't help the overall problem. For anyone with no data plan and only using wifi like mel_222 and myself, the iphone will not be able to send a message to these people who the phone has recognized as having ios5 unless the phone has a wifi connection because it is an imesssage. I am having the same problem, hopefully someone will know how to switch it. Hopefully this clarifies for anyone who might be able to answer. Luckily I will have a data plan kick in in a week, but I am sure some people who buy the phone outright will be faced with this issue.

  • How to switch which program to view photos with?

    I have a Droid Razr.  From the camera program when I click on photo in the upper right hand corner to view my gallery, it appears the gallery is opening with google photos instead of gallery.  The google photos app dims the back lighting on the photos making it difficult to view.  I would like to switch back to viewing photos using gallery, but can't figure out how to switch back to that program by default.

    I spent several hours on the phone with VZW last night for this very issue. They had no idea how to fix it.
    Ann154 is correct. However, I have a Galaxy Nexus, and for me, I went to Settings>Apps and cleared the defaults for the
    Google+ app and that is what resolved the issue for me. Just trying to help get the word out for anyone else who may be as
    frustrated as I was.

  • BT Broadband & Phone Cooling Period

    Hi
    Basically i ordered & signed up for BT Broadband & Phone on 05.02.12 via phone. On the phone i was aware of how much my bill would be, activation date and delievery time. But an important factor i was NOT and i repeat was NOT told was that my cooling off period starts when i order and up till my equipment is delievered.
    Now i recieved my equipment on 13.02.12 and all activated when i plugged it in. but after few days and not being happy with my services i decided to scan the market for better deals. Came across skys deal at the moment ( £22.50 a month ) for exactly the same as i have currently with BT. This was 20.02.12 i found this deal. Once i found it i decided to ring BT and discuss with them regarding me to cancel my subscription with them. Remember at this point un-aware of the cooling off period, but on the phone guess what im told? ' Well unfortually Mr Edy, the cooling off period starts from the time you order untill the date your equipment is delievered and activated '. ' If you want to cancel, we will have to charge you £230 '.
    But what i dont understand and that is making me so angry. I was NOT told about this? Why wasn't i?
    Now a member of BT, what can you do for me?
    Aaron

    Not to sound awful, but the chances are you would have been told that you have until the day of activation to cancel. If you're not happy, call sales and raise a dispute. They'll be able to get the call listened to and let you know the outcome.
    If you were mis-sold, you'll have the opportunity to leave your contract. If you agreed to it (like most do as a passing comment) you're tied into the contract.
    If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the the reply answers your question then please mark as ’Mark as Accepted Solution’

  • 7962 VOIP Phone Dies After switch upgrade/reboot

    Hi
    Recently I upgraded several access swicthes (2960, 3650's) which have POE and Cisco 7962 phones connected.  After the upgarde and subsequent reboot, the IP phones failed to power up and are effectively dead.
    All that happen on the phone now is that when the POE cable is connected, the phones mute button LED light flashes before the spekaer LED lights up and remains lite up.
    Approx 5 phones across multiple switches have died this way.
    Can anyone tell me if this is a behaviour they have experience and how they may have recovered from it.

    I am searching for a power adapter now.
    Yes - appears to be only 7962
    The Watts are displaying as 7.0 as opposed to the normal 6.3 and the Device ID is showing IEEE PD
    Version 12.2(55SE9)

  • Lost my phone number when switching to Sky BUT can...

    Lost my phone number when switching to Sky BUT can I get it back if I switch to BT line rental?
    Hi, my elderly parents switched to Sky FROM TalkTalk for their phone & BB several months ago and between TT not wanting to release the number ( I believe)  and Sky wanting the money the switch went ahead even tho` Sky assured that if there were any probs the trans` would be halted.. Yeah pigs fly..
    I know that this prob is between the evil twins but I have read that if the line was transfered to BT then the number could be recovered?
    I have been told by TT that the number has been given back to Openreach and it is now not possible for them to re-activate it so Sky could then transfer it to them.
    I have spent several months (on & off) many phone calls and emails/letters to try and resolve this..
    Is this possible or have I been fed another load of untruths?
    Could my father wait until he is out of contract with Sky and switch to BT if BT can recover his number?
    I know that a diff number seems trivial but they are both getting on and keep forgeting they have a new number ( they had the number for 30+ years)
    Any advice MUCH appreciated.. I had hair before all this happened

    Its one of the risks you take, when you change service providers. Its a common problem which has been mentioned a number of times on this forum.
    Service Providers like to keep you as a customer, and can make it very difficult for you, even though they are not supposed to.
    Sometimes there are technical reasons why a number cannot be retained, especially if its a provider with their own exchange equipment and core network.
    There are some useful help pages here, for BT Broadband customers only, on my personal website.
    BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

  • HT1904 How to switch the u.s store to japan store?

    How to switch u.s store to japan store?

    You are in Japan and have a Japan billing address on your account ? If you do but the stores think that you are in the US then try going to the bottom of the Featured tab in the App Store app on your phone and tap on your account id, tap on 'View Apple ID' on the popup and log into your account, and then select the Country/Region section and select Japan.

  • How to switch apps off

    I just had my phone updated and when I tryed to switch off the apps like I use to do it didn't switch off just need to learn how to switch the apps off when I'm not using them so I can save power and not have a huge phone bill because of apps being on while I'm not using them

    Double tap the home button, then swipe the app up and off the dock.

  • How to switch on / off data service to Vivaz?

    While I was abroad, I experienced data roaming which is charged per KB, when I was connected to WiFi in my vicinity. I would like to know how to switch on / off data service by changing settings on my phone, SE Vivaz.
    Solved!
    Go to Solution.

    Hi,
    There is no way to simpy switch data off and on with the Vivaz handset I'm afraid. However my best suggestion would be to create a dummy data account on the handset. If you set this as the account you wish to use when browsing the Internet through your network operator, it will be unable to connect. If you are using Wi-Fi, this will mean that if you go out of range, the handset will not be able to switch to your mobile network data.
    This can be done by following these steps:
    Settings > Connectivity > Destinations > Access Point > Add New > Packet Data > Name the account (for example, Dummy account) > Select Internet.
    Once set up, go into Internet within Destinations and set the dummy account as priority 2 for Internet behind your Wi-Fi connection.
    I'd also recommend tapping your Data Internet connection, selecting Edit and ensuring 'Use Access Point' has 'After Confirmation' written under it. This will ensure you are asked if you wish to use that connection before it automatically connects.
    Let me know how you get on

  • Broadband Phone Number displays

    Hi,
    My Gigaset SL910A phone has a facility to send and receive text messages provided CLIP is enabled. However we are unable to send text messages and any sent to us are converted to a voice message by BT.  It looks like CLIP is enabled as when we dial out on our phone the receivers caller display shows our phone number but displays our Broadband phone number rather than the true home number.  
    I have gone into the Home Hub 2 settings but can't see how to disable the broadband phone number. Does anyone know if I can somehow turn the broadband phone off and get our number shows as the normal home phone number?  I think this may solve the text problem as it looks as if the Gigaset phone number is being blocked by HH@ which then transmits the broadband number to whoever we phone.  
    We are ex-dirctory if that makes any difference.
    Thanks for any help,
    Mickey

    You must have asked for your number to be withheld when you ordered your phone line.
    You can disable it on a call-by-call basis by prefixing the number with 1470.
    You have it permanently enabled, you would have to ask BT.
    The broadband talk number gives you free evening calls, if you are only on a basic package. Also, some International calls are cheaper.
    The service is to be discontinued by BT at the end of the year anyway.
    Your hub phone (s) will still work when you disable telephony, but the calls will be made on your normal landline number.
    The crackling on the line does not sound very good, but it could be the relay in the HH2, which can cause that.
    Its worth checking your line with a normal phone, as a bad line can affect your broadband speed.
    There are some useful help pages here, for BT Broadband customers only, on my personal website.
    BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

  • How to switch from text message to iMessage for 1 contact

    I have one friend with an iPhone who all of the sudden in my messaging has switched from iMessage to text messages with working WiFi on and stable, on my iPhone 5 (iOS 7.1.2).  This is not a cellular or wifi issues, I guarantee, I am iMessaging other people without problem. She is also iMessaging other people without problem.
    I have tried all work arounds I've seen on the web including:
    -turning iMessage on and off, turning the phone on and off
    -deleting all conversation with her and then sending a new message
    -labeling the contact as an "iPhone" on my iPad (doesn't seem to switch label to  "iPhone" and "iPhone" is no longer available as a label on iPhone)
    -sending an iMessage on my iPad to her and then trying to use same message stream on the iPhone
    This is beyond ridiculous that there is no way to switch from text to iMessage, I know how to switch from iMessage to text when the "error" comes up that it can't be sent as in iMessage.  Any ideas?

    You didn't mention trying these two steps:
    If the issue occurs with a specific contact or contacts, delete and recreate the contact in the Contacts app. Create a new message to the newly created contact and try again.
    Back up and restore your device as new.
    ... which are listed as steps 4 and 5 near the middle of this article:
    iOS: Troubleshooting Messages

  • How to switch from iMessage to text message?

    How do i switch from a iMessage to a text message? Since i depend on wifi for my iMessaging i don't always have access to it
    also, I dont feel like waiting 5 mins for my iMessage to automatically send as a text message if my recipent does not have access to data or wifi, is there an easier way than waiting for it to autiomatically send?
    Thanks

    your response doesn't help the overall problem. For anyone with no data plan and only using wifi like mel_222 and myself, the iphone will not be able to send a message to these people who the phone has recognized as having ios5 unless the phone has a wifi connection because it is an imesssage. I am having the same problem, hopefully someone will know how to switch it. Hopefully this clarifies for anyone who might be able to answer. Luckily I will have a data plan kick in in a week, but I am sure some people who buy the phone outright will be faced with this issue.

Maybe you are looking for

  • Memory speed - Equium A200 PSAF5E

    Hi all, I own a Toshiba Equium A200 - 1V0 Model no. PSAF5E - 001003sp Bios version updated to v. 2.50 Everest Ultimate 4.5.1330 says that I have 2GB of RAM, in two sticks of Samsumg DDR2-667. Also it says too that my FSB is 133Mhz with correct CPU sp

  • Logical system name in SRM system

    We are into SRM version 5.(SRM server 5.5) with the backend system as SAP ECC 6.0 . The logical system is defined as '0000000050' for backend SAP  system . All the systems like CRM and BW uses this as the logical system name for backend system . Rece

  • Lockbox issue with overpayment

    Hi,    We have a small situation going on in our company and any help on this would be deeply appreciated. We are using partial payment payments for AR and intend to use that. When we process the lockbox file, depending on the amount 3 things happen:

  • 5.1 mix broken in CC 2014.2 (V8.1)?

    Has anybody experienced the same with the most recent version of Premiere (V8.1)? The audio hardware only shows L/R but I certainly can send something out to front L/R and center. The same applies for Windows WDM setup. Only two channels show up but

  • How to stop sending spool list of a particular step in a batch job to the Distribution list

    Hi  All I have a Batch job  with three steps ( Three programs) which will be sending Spool list for all the 3 steps to the assigned distribution list My user requirement is he want only the spool list for the 3rd step only (Exclude 1st and 2nd)