BT Broadband Talk Not Working

I have had no problems with my hub / router or phone until recently, but now my hub phone has stopped functioning correctly. The light on the hub has gone out and the phone does now not call through the hub but instead through the landline. When I log into the gui it simply says the BT Broadband Talk service is temporarily unavailable and suggests I restart the router which I have tried multiple times to no avail. This problem now has been going on for about a month so its clearly nothing temporary anymore. Any help would be greatly appreciated.

Have you tried re-activating it using http://www.bt.com/bbt ?

Similar Messages

Broadband did not work for days

my broadband did not work for days. I spent two lengthy periods of time on the phone to sky, once fo 1.5 hrs and the other time for 1 hour. Both phone calls achieved nothing. Eventually the internet started working again. The sky service status online advised that my area had no problems. The service from sky has been incredibly rubbish and has made me very angry. In order to get myself online i had to pay BT Wifi £8 for a day pass. Sky have been very generous and have compensated me 62 pence for the time I have been without the internet. My question to sky is..... will youplease refund me the £8 I have spent and give me some sort of compensation for the dismal service provided. I have tried to call calling you this morning but you phone is engaged, I tired emailin gyou but you have no email, I tried the live chat, but it is busy. The forum is the only place I can go.

Sky don't post here and won't respond to you here. The forum is customer to customer support only.
Official complaints process as below:
http://help.sky.com/articles/how-to-make-a-complaint
Sky are under no obligation to compensate you for the loss of service and the 62p is, I assume, the cost of your package for the days it was not working.

Broadband is not working

I need some help. My computer is saying that the sim card and the device for my broadband is not found. I haven't deleted anything and was working just fine when I shutdown my computer yesterday. I went to system restore and restored my system, but that did not work. What do I do?

Your computer shouldn't have to detect a SIM card for any reason. Which device are we talking about here? What is the OS of your computer?
My first suggestion is to call it into VZW as a bad SIM card. They can ship you a new one for free.
That or bring it into a VZW store. Most have spare SIM cards in stock that they can configure and activate for you. They could also try to confirm that its a SIM card problem by popping in one that they know works. If your MiFi still doesn't work with a good SIM card then the device is faulty and should be replaced.

Smart Talk not working with Bluetooth since update

I have been using Smart Talk for many months now on my iPhone. I have a bluetooth headset which I generally use.
This has worked fine (with the exception that when I get an incomming call it disconnects the bluetooth from the Smart Talk call).
But now, since installing version 1.28.0, Smart Talk is not working with my bluetooth headset at all. When I first make a call the headset is connected - I hear ringback tone. But as soon as the call is answered, the headset disconnects and the call is transferred to the iPhone itself. And the Smart Talk app does not give me any options to select the "audio source" (as it does if I make an ordinary mobile call).
As I almost exclusively use the headset, this latest update has made Smart Talk unusable for me.
Is there anyway I can get back to the previous version?

I worked out the problem... I'm using iPhone 4S iOS7
- Start BT Smart Talk from in car
- call someone, connects to bluetooth
- call someone else, connects to bluetooth
- call someone else, no bluetooth connection
- kill and restart BT Smart talk
- call someone, connects to bluetooth
- call someone else, connects to bluetooth
- call someone else, no bluetooth connection
3rd call, always no bluetooth.
It seems there is no way to select the output like with all other bluetooth devices too

T mobile broadband stick not working after lion instal

T mobile broadband USB stick not working after lion install

No s#!t batman.The point is a mac laptop is ment to be mobile and for it to be mobile you need a mobile broadband stick so when a new op system lion is released don't you think it would be one of the first items to be checked for compatability.with snow leopard the same problem took months before I could use a broadband stick,there is no lion connection manager software available right now until someone decides to wright it, so does anyone have a usefull fix i can use ?

Sky talk not working again !!!!!

My phone line is down again.... I'm not prepared to phone on my mobile as I have just been informed that there is a 20 minute wait it's all good and well giving a contact number free of charge for sky talk customers but how are you supposed to access it if your phone line is not working could somebody please look into why my phone line has gone down again . My number is 01142323359

Try deleting the app, rebooting your iPhone and then installing the app again.

Broadband dongle not working

meteor BB dongle not working.. running lion on new macbook pro??.. any ideas??... user new to mac world

Talk to the vendor about an upgraded driver for Lion.
Allan

Broadband Shield Not Working

Hi FolksI have just changed from O2 broadband to Sky Fibre Broadband.I was initially delighted how easy the Broadband Sheild was to work, and I went in to the customs setting to prevent access to:'Pornigraphy and Adult''Dating'websites as we have children using devices in the house, but this would still aloow us as adults to view typical adult discussion sites.However it doesnt actually block anything, as I have selibreately searched these sites and access to them isn't blocked.I ahve tried talking to Sky but they say in this case what I need to do is block access to specific websites by entering the IP address of each site I want to block, however this is completely nonsense and rediculous, how is this considerd parental controls, as how am I going to be able to get the IP address for every?Had anyone any sensible ideas how to make it work.Basically we have quite a number of devices and I want to block these sites via the router rather than each individual device.CheersAlan

Thats what I believed as well. However after talking directly to a emember of the Sky Sheild team it appears this is very much in its infancy, as there are only 20,000 users using at to date, and i dont think they have it fully tested for problems yet. If its blocked at the router as they say, then it shouldnt matter what settting each device has, the router shouldnt be able to access blocked content. If you have to clear cache files, and internet history and do all sorts of stuff, then if we wish to change or adjust the setting, we have to go through each devices history, and cache files before the Sheild takes effect, then its not at all effective. The response form Sky hasnt been satisfactory at all. I also had a problem accessing my long standing email address via outlook after I changed to Sky (even though it would work perfectly when using my laptop via O2 and BT connections), and one representative told me to get a sky email otherwise ther was nothing they could do, not exactly helpful, not terribly impressed to be honest.

Google Talk not working with Messages

I have added the google Talk account in the messages application. But only the jabber account shows in the main window, which was there by default. Am I adding the account properly. Should Messages work like the Windows Google Talk application ?

HI,
This is somewhat a hangover from the iChat days.
In Messages > Preferences > Accounts is the GoogleTalk account listed as Gmail item ?
IF you highlight it and go to "Server Settings" is the server talk.google.com ?
Now go to the Window Menu
Select the Buddies item (you probably still have a combined list)
The Buddy List should now appear.
GO to the Preferences > General section and untick the item about gathering Buddy list into one list
You may now have more than one Buddy list
Instead of being called "Buddies" it will take on the name of the Account ....
The exceptions to this are:-
Generic AIM Logins will be Called AIM Buddy List if there is only one
Generic Jabber Logins will lbe listed as "Jabber" Buddy list if there is only one Jabber list
(you can also have Yahoo and Bonjour)
IF in the Preferences > Accounts you add details to the Description Line then the Buddy List gets called this
IF you don't name or Describe the accounts and have more than one (Jabber and /or AIM) then they get named with the Screen Name or ID.
Account and Buddy list "Named"
This now carries over to the text entry field/box in the main Messages Window where the ID or Screen Name you will be chatting from is listed in that Text field.
IF you only have one Jabber Account And Googletalk is a Jabber account it will read "Jabber" unless you have more Jabber accounts or add a Description
10:50 PM Wednesday; November 14, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.2)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Mobile Broadband Connect not working on x301

Hi
I definitely cannot get mobile broadband working on my UK x301
I have a fully updated system with all the Win7 Drivers (using both System update 4 and further manual downloads) and I found a Win 7 version of Mobile Broadband Connect however when loaded it hangs on Initialising... for ages and then complains that "the sim card present on the system cannot be read"
Can anyone help please?

That has been on issue ever since RC1. The Ericsson Broadband Modem only seems to work in specific combinations of older drivers. Also not every access connections version seems to behave nicely in combination with it. My success rate in configuring those has been approx 50% and I gave up.
I did manage a 100% success rate though with all most recent drivers + the specific 7uw706ww ericsson package from the beta website.
There's one catch though. This driver seems to be capped at 384Kbps e.g. stuck in UMTS mode.
For me that's enough to last until proper drivers come out, but it is higly irritating.
Lenovo Premium Business Partner
X1 Carbon Touch | i7-3667U | 8Gb | 256Gb | HD 4000 | 14HD+ | WWAN | W8.1 Pro RTM x64 |

Mobile broadband (un2430) not working with Windows 10 on Folio 9470m

I have had Windows 10 installed on my HP Folio 9470m since October last year (insider program). One thing that I never been able to get to work is the mobile broadband device (un2430). It simply says "Radio off". All attempts to re-install driver (which shows as "working"), disable/enable the device etc etc just leads to same result, that the "Radio is off".I googled this a couple of times and found that other users have the same problem. Also colleagues of mine with same model has also the same problem. It works just fine under Windows 8.1. Anyone has a workaround? I was really disappointed when W10 was released that HP did not update the drivers-page with W10 drivers:http://h20566.www2.hp.com/hpsc/swd/public/readIndex?sp4ts.oid=5271102 How can I find out when/if HP will release W10 drivers, including support for mobile broadband, for the HP Folio 9470m?

Thank you for your reply. I've tryed several SIM cards, and arrived to the conclusion that it doesn't work with portuguese operator TMN (all the SIM i've tried from TMN lead to the same result)!
I guess that there is some misconfiguration on WM config files. I found one xml with default configuration for worldwide carriers, and maybe it is possible to change some of those parameters to make it work... I just don't know wich one!
Maybe I'll have some luck, of someone reading this, and that is able to give me a tip to solve the problem.
The SIM card just work well on a 3G usb stick, or even in a celular phone!
Thank you again.

Mobile Broadband does not work on HP mini 110

This is the my device:
$ lsusb | grep Gobi
Bus 001 Device 077: ID 03f0:1f1d Hewlett-Packard un2400 Gobi Wireless Modem
sometimes another result:
$ lsusb | grep Gobi
Bus 001 Device 020: ID 03f0:201d Hewlett-Packard un2400 Gobi Wireless Modem (QDL mode)
I have installed in my netbook with these steps:
1. Install network manager: networkmanager, network-manager-applet. Then systemctl enable, start NetworkManager.service
Run "sudo NetworkManager".
2. Install BCM4312 and Hp un2400 gobi firmwares: b43-fwcutter. And b43-firmware, gobi-loader, gobi-firmware from AUR
Here is my /lib/udev/rules.d/60-gobi.rules, i have added the red line:
# udev rules for firmware loading on qualcomm gobi devices
ACTION=="add", SUBSYSTEM=="tty" KERNEL=="ttyUSB*" GOTO="gobi_rules"
GOTO="gobi_rules_end"
LABEL="gobi_rules"
ATTRS{idVendor}=="05c6", ATTRS{idProduct}=="9211", RUN+="gobi_loader $env{DEVNAME} /usr/lib/firmware/gobi"
ATTRS{idVendor}=="03f0", ATTRS{idProduct}=="201d", RUN+="gobi_loader $env{DEVNAME} /usr/lib/firmware/gobi"
ATTRS{idVendor}=="03f0", ATTRS{idProduct}=="1f1d", RUN+="gobi_loader $env{DEVNAME} /usr/lib/firmware/gobi"
ATTRS{idVendor}=="04da", ATTRS{idProduct}=="250c", RUN+="gobi_loader $env{DEVNAME} /usr/lib/firmware/gobi"
ATTRS{idVendor}=="413c", ATTRS{idProduct}=="8171", RUN+="gobi_loader $env{DEVNAME} /usr/lib/firmware/gobi"
ATTRS{idVendor}=="1410", ATTRS{idProduct}=="a008", RUN+="gobi_loader $env{DEVNAME} /usr/lib/firmware/gobi"
ATTRS{idVendor}=="0b05", ATTRS{idProduct}=="1774", RUN+="gobi_loader $env{DEVNAME} /usr/lib/firmware/gobi"
ATTRS{idVendor}=="19d2", ATTRS{idProduct}=="fff2", RUN+="gobi_loader $env{DEVNAME} /usr/lib/firmware/gobi"
ATTRS{idVendor}=="1557", ATTRS{idProduct}=="0a80", RUN+="gobi_loader $env{DEVNAME} /usr/lib/firmware/gobi"
ATTRS{idVendor}=="05c6", ATTRS{idProduct}=="9008", RUN+="gobi_loader $env{DEVNAME} /usr/lib/firmware/gobi"
ATTRS{idVendor}=="05c6", ATTRS{idProduct}=="9201", RUN+="gobi_loader $env{DEVNAME} /usr/lib/firmware/gobi"
ATTRS{idVendor}=="05c6", ATTRS{idProduct}=="9221", RUN+="gobi_loader $env{DEVNAME} /usr/lib/firmware/gobi"
ATTRS{idVendor}=="05c6", ATTRS{idProduct}=="9231", RUN+="gobi_loader $env{DEVNAME} /usr/lib/firmware/gobi"
ATTRS{idVendor}=="1f45", ATTRS{idProduct}=="0001", RUN+="gobi_loader $env{DEVNAME} /usr/lib/firmware/gobi"
ATTRS{idVendor}=="16d8", ATTRS{idProduct}=="8001", RUN+="gobi_loader -2000 $env{DEVNAME} /usr/lib/firmware/gobi"
ATTRS{idVendor}=="1199", ATTRS{idProduct}=="9000", RUN+="gobi_loader -2000 $env{DEVNAME} /usr/lib/firmware/gobi"
ATTRS{idVendor}=="03f0", ATTRS{idProduct}=="241d", RUN+="gobi_loader -2000 $env{DEVNAME} /usr/lib/firmware/gobi"
ATTRS{idVendor}=="05c6", ATTRS{idProduct}=="9204", RUN+="gobi_loader -2000 $env{DEVNAME} /usr/lib/firmware/gobi"
ATTRS{idVendor}=="05c6", ATTRS{idProduct}=="9214", RUN+="gobi_loader -2000 $env{DEVNAME} /usr/lib/firmware/gobi"
ATTRS{idVendor}=="05c6", ATTRS{idProduct}=="9224", RUN+="gobi_loader -2000 $env{DEVNAME} /usr/lib/firmware/gobi"
ATTRS{idVendor}=="05c6", ATTRS{idProduct}=="9234", RUN+="gobi_loader -2000 $env{DEVNAME} /usr/lib/firmware/gobi"
ATTRS{idVendor}=="05c6", ATTRS{idProduct}=="9244", RUN+="gobi_loader -2000 $env{DEVNAME} /usr/lib/firmware/gobi"
ATTRS{idVendor}=="05c6", ATTRS{idProduct}=="9264", RUN+="gobi_loader -2000 $env{DEVNAME} /usr/lib/firmware/gobi"
ATTRS{idVendor}=="05c6", ATTRS{idProduct}=="9274", RUN+="gobi_loader -2000 $env{DEVNAME} /usr/lib/firmware/gobi"
ATTRS{idVendor}=="413c", ATTRS{idProduct}=="8185", RUN+="gobi_loader -2000 $env{DEVNAME} /usr/lib/firmware/gobi"
LABEL="gobi_rules_end"
3. Install wireless: wpa_supplicant, wireless_tools, gnome-keyring.
Then systemctl enable and start wpa_supplicant.service
4. Install modem manager: usbutils, usb_modeswitch, modemmanager, mobile-broadband-provider-info
Then systemctl enable and start ModemManager
After reboot, i get this log keep being repeat forever:
$ dmesg | grep ttyUSB
[ 8.783499] usb 1-6: Qualcomm USB modem converter now attached to ttyUSB0
[ 13.924825] qcserial ttyUSB0: usb_wwan_indat_callback: resubmit read urb failed. (-19)
[ 13.925166] qcserial ttyUSB0: usb_wwan_indat_callback: resubmit read urb failed. (-19)
[ 13.925490] qcserial ttyUSB0: usb_wwan_indat_callback: resubmit read urb failed. (-19)
[ 13.925813] qcserial ttyUSB0: usb_wwan_indat_callback: resubmit read urb failed. (-19)
[ 13.926887] qcserial ttyUSB0: Qualcomm USB modem converter now disconnected from ttyUSB0
[ 15.560838] usb 1-6: Qualcomm USB modem converter now attached to ttyUSB0
[ 15.562758] usb 1-6: Qualcomm USB modem converter now attached to ttyUSB1
[ 17.869672] qcserial ttyUSB0: usb_wwan_indat_callback: resubmit read urb failed. (-19)
[ 17.869883] qcserial ttyUSB0: usb_wwan_indat_callback: resubmit read urb failed. (-19)
[ 17.870123] qcserial ttyUSB0: usb_wwan_indat_callback: resubmit read urb failed. (-19)
[ 17.870366] qcserial ttyUSB0: usb_wwan_indat_callback: resubmit read urb failed. (-19)
[ 17.872845] qcserial ttyUSB1: usb_wwan_indat_callback: resubmit read urb failed. (-19)
[ 17.873762] qcserial ttyUSB0: Qualcomm USB modem converter now disconnected from ttyUSB0
[ 17.874305] qcserial ttyUSB1: usb_wwan_indat_callback: resubmit read urb failed. (-19)
[ 17.874560] qcserial ttyUSB1: usb_wwan_indat_callback: resubmit read urb failed. (-19)
[ 17.874813] qcserial ttyUSB1: usb_wwan_indat_callback: resubmit read urb failed. (-19)
[ 17.875605] qcserial ttyUSB1: Qualcomm USB modem converter now disconnected from ttyUSB1
[ 18.845277] usb 1-6: Qualcomm USB modem converter now attached to ttyUSB0
[ 22.616332] qcserial ttyUSB0: usb_wwan_indat_callback: resubmit read urb failed. (-19)
[ 22.616698] qcserial ttyUSB0: usb_wwan_indat_callback: resubmit read urb failed. (-19)
[ 22.617055] qcserial ttyUSB0: usb_wwan_indat_callback: resubmit read urb failed. (-19)
[ 22.617385] qcserial ttyUSB0: usb_wwan_indat_callback: resubmit read urb failed. (-19)
[ 22.618447] qcserial ttyUSB0: Qualcomm USB modem converter now disconnected from ttyUSB0
[ 23.560845] usb 1-6: Qualcomm USB modem converter now attached to ttyUSB0
[ 23.562771] usb 1-6: Qualcomm USB modem converter now attached to ttyUSB1
Am i missing any configuration or installation?
Last edited by princenguyen (2014-06-19 06:30:17)

Hello,
Did you find a solution because I am having the same issue with my Sony Vaio SA. It has a Gobi 2000 and works perfectly on Ubuntu 14.04 and all other distributions I have tried so i know the hardware is fine.
I dont get the message repeating although I can get it like that by using the firmware from the AUR. If I use the firmware I got from my previous Windows installation then the error only occurs when turning the device on. This is so annoying
I get the following:
NetworkManager[1787]: <info> (wwp0s26u1u4): DHCPv4 state changed nbi -> preinit
Jul 08 23:40:11 Raspberry dhcpcd[5345]: wwp0s26u1u4: soliciting an IPv6 router
Jul 08 23:40:12 Raspberry dhcpcd[5345]: wwp0s26u1u4: soliciting a DHCP lease
Jul 08 23:40:12 Raspberry kernel: qmi_wwan 1-1.4:1.0: nonzero urb status received: -71
Jul 08 23:40:12 Raspberry kernel: qmi_wwan 1-1.4:1.0: wdm_int_callback - 0 bytes
Jul 08 23:40:12 Raspberry kernel: usb 1-1.4: USB disconnect, device number 9
Jul 08 23:40:12 Raspberry kernel: qcserial ttyUSB0: usb_wwan_indat_callback: resubmit read urb failed. (-19)
Jul 08 23:40:12 Raspberry kernel: qcserial ttyUSB1: usb_wwan_indat_callback: resubmit read urb failed. (-19)
Jul 08 23:40:12 Raspberry dhcpcd[3049]: if_managelink: No such device or address
Jul 08 23:40:12 Raspberry dhcpcd[5345]: wwp0s26u1u4: dhcp if_readrawpacket: Network is down
Jul 08 23:40:12 Raspberry kernel: qmi_wwan 1-1.4:1.0 wwp0s26u1u4: unregister 'qmi_wwan' usb-0000:00:1a.0-1.4, WWAN/QMI device
Jul 08 23:40:12 Raspberry kernel: qcserial ttyUSB0: usb_wwan_indat_callback: resubmit read urb failed. (-19)
Jul 08 23:40:12 Raspberry ModemManager[1785]: <info> (net/wwp0s26u1u4): released by modem /sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4
Jul 08 23:40:12 Raspberry kernel: qcserial ttyUSB1: usb_wwan_indat_callback: resubmit read urb failed. (-19)
Jul 08 23:40:12 Raspberry kernel: qcserial ttyUSB0: usb_wwan_indat_callback: resubmit read urb failed. (-19)
Jul 08 23:40:12 Raspberry kernel: qcserial ttyUSB1: usb_wwan_indat_callback: resubmit read urb failed. (-19)
Jul 08 23:40:12 Raspberry dhcpcd[5345]: if_managelink: No such device or address
Jul 08 23:40:12 Raspberry kernel: qcserial ttyUSB0: usb_wwan_indat_callback: resubmit read urb failed. (-19)
Jul 08 23:40:12 Raspberry kernel: qcserial ttyUSB1: usb_wwan_indat_callback: resubmit read urb failed. (-19)
Jul 08 23:40:12 Raspberry ModemManager[1785]: <info> (usbmisc/cdc-wdm1): released by modem /sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4
Jul 08 23:40:12 Raspberry ModemManager[1785]: <info> (tty/ttyUSB1): released by modem /sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4
Jul 08 23:40:12 Raspberry ModemManager[1785]: <info> (tty/ttyUSB2): released by modem /sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4
Jul 08 23:40:12 Raspberry ModemManager[1785]: <info> (tty/ttyUSB0): released by modem /sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4
Jul 08 23:40:12 Raspberry ModemManager[1785]: [/dev/cdc-wdm1] Releasing 'wds' client with flags 'release-cid'...
Jul 08 23:40:12 Raspberry ModemManager[1785]: [/dev/cdc-wdm1] Unregistered 'wds' client with ID '1'
Jul 08 23:40:12 Raspberry ModemManager[1785]: [/dev/cdc-wdm1] Releasing 'pds' client with flags 'release-cid'...
Jul 08 23:40:12 Raspberry ModemManager[1785]: [/dev/cdc-wdm1] Unregistered 'pds' client with ID '1'
Jul 08 23:40:12 Raspberry ModemManager[1785]: [/dev/cdc-wdm1] Releasing 'wms' client with flags 'release-cid'...
Jul 08 23:40:12 Raspberry ModemManager[1785]: [/dev/cdc-wdm1] Unregistered 'wms' client with ID '1'
Jul 08 23:40:12 Raspberry ModemManager[1785]: [/dev/cdc-wdm1] Releasing 'nas' client with flags 'release-cid'...
Jul 08 23:40:12 Raspberry ModemManager[1785]: [/dev/cdc-wdm1] Unregistered 'nas' client with ID '1'
Jul 08 23:40:12 Raspberry ModemManager[1785]: [/dev/cdc-wdm1] Releasing 'dms' client with flags 'release-cid'...
Jul 08 23:40:12 Raspberry ModemManager[1785]: [/dev/cdc-wdm1] Unregistered 'dms' client with ID '1'
Jul 08 23:40:12 Raspberry NetworkManager[1787]: <info> (cdc-wdm1): device state change: ip-config -> unmanaged (reason 'removed') [70 10 36]
Jul 08 23:40:12 Raspberry NetworkManager[1787]: <info> (cdc-wdm1): deactivating device (reason 'removed') [36]
Jul 08 23:40:12 Raspberry dhcpcd[5345]: received signal TERM from PID 1787, stopping
Jul 08 23:40:12 Raspberry dhcpcd[5345]: wwp0s26u1u4: removing interface
Jul 08 23:40:12 Raspberry kernel: qcserial ttyUSB0: Qualcomm USB modem converter now disconnected from ttyUSB0
Jul 08 23:40:12 Raspberry kernel: qcserial 1-1.4:1.1: device disconnected
Jul 08 23:40:12 Raspberry kernel: qcserial ttyUSB1: Qualcomm USB modem converter now disconnected from ttyUSB1
Jul 08 23:40:12 Raspberry kernel: qcserial 1-1.4:1.2: device disconnected
Jul 08 23:40:12 Raspberry kernel: qcserial ttyUSB2: Qualcomm USB modem converter now disconnected from ttyUSB2
Jul 08 23:40:12 Raspberry kernel: qcserial 1-1.4:1.3: device disconnected
Jul 08 23:40:13 Raspberry dhcpcd[5345]: exited

Google Talk not working with Messages after upgrade to Mountain Lion

After upgrading to Mountain Lion, I'm no longer able to use Google Talk with the new Messages App. It worked fine on iChat, but now I cannot enable the account. When I try to check the enable box, it immediately unchecks itself and nothing happens. Any suggestions?

Welcome to Apple Communities
Open Finder, press Option key and select Go > Library. Open Preferences and delete com.apple.imessage.bag.plist and com.apple.imservice.iMessage.plist

[SOLVED] Huawei E173s-1 mobile broadband dongle not working

Update: check the wiki entry at https://wiki.archlinux.org/index.php/Huawei_E173s
Hi,
My dongle works out-of-the-box in Ubuntu but I can't get it to work in Arch Linux.
I followed the instructions from this site: http://www.vivaolinux.com.br/dica/Modem … s-no-Linux
/etc/usb_modeswitch.d/12d1:1c0b
DefaultVendor=0x12d1
DefaultProduct=0x1c0b
TargetVendor=0x12d1
TargetProduct=0x1c05
CheckSuccess=20
MessageEndpoint=0x0f
MessageContent="55534243123456780000000000000011062000000100000000000000000000"
/usr/lib/udev/rules.d/40-usb_modeswitch.rules
ATTRS{idVendor}=="12d1", ATTRS{idProduct}=="1c0b", RUN+="usb_modeswitch '%b/%k'"
# usb_modeswitch -c /etc/usb_modeswitch.d/12d1:1c0b
Looking for target devices ...
No devices in target mode or class found
Looking for default devices ...
found matching product ID
adding device
Found device in default mode, class or configuration (1)
Accessing device 003 on bus 001 ...
Getting the current device configuration ...
OK, got current device configuration (1)
Using first interface: 0x00
Using endpoints 0x0f (out) and 0x8f (in)
Inquiring device details; driver will be detached ...
Looking for active driver ...
OK, driver found; name unknown, limitation of libusb1
OK, driver "unkown" detached
SCSI inquiry data (for identification)
Vendor String: HUAWEI
Model String: Mass Storage
Revision String: 2.31
USB description data (for identification)
Manufacturer: HUAWEI
Product: HUAWEI Mobile
Serial No.: not provided
Setting up communication with interface 0
Using endpoint 0x0f for message sending ...
Trying to send message 1 to endpoint 0x0f ...
OK, message successfully sent
Resetting response endpoint 0x8f
Resetting message endpoint 0x0f
Device is gone, skipping any further commands
Checking for mode switch (max. 20 times, once per second) ...
Searching for target devices ...
Searching for target devices ...
Searching for target devices ...
Searching for target devices ...
Searching for target devices ...
Searching for target devices ...
found matching product ID
adding device
Found target device, now opening
Found correct target device
Mode switch succeeded. Bye.
# modprobe usbserial vendor=0x12d1 product=0x1c0b
But when I run wvdialconf it can't find the modem:
Editing `/etc/wvdial.conf'.
Scanning your serial ports for a modem.
Sorry, no modem was detected! Is it in use by another program?
Did you configure it properly with setserial?
Please read the FAQ at [url]http://alumnit.ca/wiki/?WvDial[/url]
As a result I'm stuck with Ubuntu for the time being. ;( Any help would be very appreciated.
Edit: running sakis3g after doing the above I was able to connect but I'd still love to know how to to make it work manually with wvdial.
Last edited by jasewobble (2012-04-22 22:25:22)

Hi
Thanks for the advice above. Initially cleaned off original app
I removed the software application from Mac HD/Applications/Orange Mobile Partner
The kernel extension located at Mac HD/System/Library/Extensions/HuaweiDataCardDriver.kext
The modem script located at Mac HD/Library/Modem Scripts/HUAWEI Mobile Connect – 3G Modem
Then dragged the Orange MobilePartner file to the HD, selected 'Show Package Contents' and followed the advice above opening the .mpkg.
Was about to try and return the dongle, but now after several tests, am sure it works
Another Apple Discussion Board success

Orange Huawei E160E Mobile Broadband Dongle - NOT WORKING NOW!

Well as you can see from the title - i've just upgraded to Snow Leopard over the weekend - and love the 16GB of harddrive space I got back, however I came you use my Orange Huawei E160E Mobile Broadband USB Modem 'Dongle' and it doesn't work.
25 mins on the phone to Orange Tech Support, and they tell me 'sorry we can't do anymore' & 'thats what you get for being on the cutting edge of technology'!!!
Apple Care told me to install Rosetta - and still NO good!
Any ideas?

Hi
Thanks for the advice above. Initially cleaned off original app
I removed the software application from Mac HD/Applications/Orange Mobile Partner
The kernel extension located at Mac HD/System/Library/Extensions/HuaweiDataCardDriver.kext
The modem script located at Mac HD/Library/Modem Scripts/HUAWEI Mobile Connect – 3G Modem
Then dragged the Orange MobilePartner file to the HD, selected 'Show Package Contents' and followed the advice above opening the .mpkg.
Was about to try and return the dongle, but now after several tests, am sure it works
Another Apple Discussion Board success

BT Broadband Talk Not Working

Similar Messages

Maybe you are looking for