BT Cabinet Locations for BT Infinity

I checked my location in Scarborough, North Yorkshire and it came up with 3 possible cabinets I could be connected to:
P45 - 10%
P36 - 57%
P35 - 32%
Does anyone know the physical location of these three cabinet numbers?

Morning!
This is my first post, and i hope this is the right way to ask the question.
I'm off the Farnham exchange, on cabinet P7 i believe, any chance you know where that cab is? I'm desperately trying to find out if BT plan to upgrade the cabinet as it seems to be one of the few off the exchange which hasn't been.
Many thanks.

Similar Messages

Waiting eternity for BT Infinity

Rewind 4 years I was pretty happy to see the end of Virgin Media fibre service which was so bad it was almost un useable and moving back BT with the idea that BT Infinity would be enabled on 31st Dec 2010 according to the checker.
Fast forward to now BT Infinity still not enabled!?
I think I've been pretty patient, I think BT have taken my custom for granted. I think the Infinity checker is total BS just to get our hopes up. After seeing a due date for my area since 2010 and my friends not even having a set date but are now in long time enabled areas Im wanting to leave BT.
I live opposite a field in a suburban area, on quite a odd shaped road and Im 100 percent sure its due to there not being enough customers for them to finance enabling fibre down my road, which is fair enough just dont keep feeding me lies with your checker. Its the only reason, the exchange has been long enabled and a built up road two blocks away has an enabled cabinet.
I need to speak to someone from BT who can give me a detailed and precise reason and a date if any with actual plans that engineer team is installing fibre, not some BS cabinet checker, Ive used them all, they all spout the same bs.
If I dont have any news about this I plan on moving back to virgin which I am reluctant to do.

on Exchange CROYDON is served by Cabinet 62
Featured ProductsDownstream Line Rate(Mbps)Upstream Line Rate(Mbps)Downstream Range(Mbps)Availability Date High Low High Low
FTTC Range A (Clean)
80
74.7
20
20
31-Dec-14
FTTC Range B (Impacted)
80
66.8
20
17.7
31-Dec-14
WBC ADSL 2+
Up to 4.5
3.5 to 5.5
Available
WBC ADSL 2+ Annex M
Up to 4.5
Up to 0.5
3.5 to 5.5
Available
ADSL Max
Up to 3
2 to 5.5
Available
WBC Fixed Rate
1
Available
Fixed Rate
1
Available
Other Offerings
Fibre Multicast
31-Dec-14
Copper Multicast
Available
FTTC is currently not available on this cabinet due to following reasons:- Sorry it's taking us longer than planned to get your cabinet ready for service. Please bear with us.
Surrey, croydon.

Want to register for BT Infinity

You go through the website, all the links point to BT.com/infinity but when on the page, there is no form or place to sign for interest.
The Exchange in Barnet is upgraded for BT infinity, some of the cabinets are done but talking to sales and re visiting the website, still no joy on when the roll out for the fiber optic circuit will be for EN4 8BG. Frustrating!!!!!
Surely BT can make it simpler to register for interest in BT Infinity.
Solved!
Go to Solution.

BT is making so difficult for to place order for BT Infinity. They spend enough time on tele sales but when i call them to place an order. It is remindimg me off the old days of BT or should I say Post Office when one waited for telephone line for months.
I have checked with BT infinity website for eligibilty and my address can have new Bt Infinity.
Please someone at BT Infinity sales review your procedures and make it easier for a direct customer to place an order.
Your are pushing me towards going with different vendors,,,,,,,
Wake up!!!!

When i double click itunes it doesn't open it just comes up with an error saying " The itunes library.itl file cannot be found or created. The default location for this file is in the 'itunes' folder in the 'music' folder". How can i fix this?

When i double click itunes it doesn't open it just comes up with an error saying " The itunes library.itl file cannot be found or created. The default location for this file is in the 'itunes' folder in the 'music' folder. How can i fix this problem?

Anyone can help to advice how to solve this issue ?

How can i stop an error message that comes up when i am using word? the error message is "word is unable to save the Autorecover file in the location specified. Make sure that you have specified a valid location for Autoreover files in Preferences,-

how can i stop an error message that comes up when i am using word? the error message is "word is unable to save the Autorecover file in the location specified. Make sure that you have specified a valid location for Autoreover files in Preferences,…"

It sounds like if you open Preferences in Word there will be a place where you can specify where to store autorecover files. Right now it sounds like it's pointing to somewhere that doesn't exist.

Help needed in Finding Download location for Sun One Portal 7

Hi,
help needed for finding download location for Sun ONE Portal 7. I tried to find in Oracle Download page ,
http://www.oracle.com/us/sun/sun-products-map-075562.html, But unable to find.
Please share the link for download location.
I am totally new in Sun ONE Portal.
Thanks,
Edited by: 945439 on Oct 5, 2012 3:41 AM

try edelivery.oracle.com under sun products.

When I try to open ITunes it brings up a box that says the iTunes Library. itl file cannot be found or created. the default location for this fie is in the itunes folder in the music folder How do I solve this

My laptop was updating itunes and turned off and every since when i try to load itunes it brings up a window that says
The itunes library.itl fie cannot be found or created. The default location for this fie is in the itunes folder in the Music folder.
an I cant figure out what to do to get itunes to load so I can't use itunes at all which ***** since it also means I right now I can't add music to my ipod or apps or anything. So hopefully someone can tell me what happened and how to fix it or solve it

Hi pgarard1,
If you are having issues with launching iTunes after an update, you may want to take a look at the troubleshooting in the following article:
iTunes for Windows: Doesn't open after upgrading in Windows Vista or Windows 7
http://support.apple.com/kb/TS2363
Regards,
- Brenden

What to look for in a location for setting up an Extreme?

I have a router, cable modem, cell phone extender, and hub in a bedroom closet because that is the way it was setup when I moved into my house. It is messy and there are lots of messy cables. I want to move all of this into another part of my house. What do I need to look for when deciding a location for all of this gear? What technical requirements do I need to ensure that it will work? Do I just need power and an ethernet port on the wall? Anything else?
Thanks.

Why adequate ventillation?
To keep electronics running cooler, so they will last longer. If you are not concerned about component life, then you can ignore the advice about ventilation.
The gear is on one side of my house and I plan to add another Express device to use to extend the Wi-Fi signal. In this case, I'm assuming your sprinkler example does not matter?
Then why did you not tell us this originally? We could have saved you some time.
You told us that you planned to move all of the gear in the closet, and now you seem to be saying that is not the plan.
Locate the AirPort Express approximately half way between the AirPort Extreme and the general area that needs more wireless coverage.
Extending this way always results in compromises. The Express needs to be close to the AirPort Extreme to get a good strong signal, and yet it also needs to be close to the wireless devices to deliver a strong signal to the devices.
It cannot be located both near the Extreme and your devices at the same time, so the best "compromise" is about half way between the Extreme and the area where you need more wireless signal coverage. Avoid walls or ceilings in the signal path as much as possible.
Remember that the Express can only "extend" the quality and speed of signal that it receives. It cannot "boost" the speed of the connection, it can only make it go further.
A much better solution if possible would be to connect the AirPort Express to the AirPort Extreme using a wired Ethernet cable connection. Then, you can locate the Express exactly where it will be most needed, since there is no signal loss in a wire.

SBS 2011 GPO for changing the default save location for Word/Excel 2013 not working

So this is a strange one. I've got an SBS 2011 server that's the only domain controller in the org. I've created a GPO to change the default save location for Excel 2013 and Word 2013 using the Office 2013 ADMX files which were installed to the PolicyDefinitions
folder.
The GPO (U-Office2013 Default Save Location) only contains:
1. User Configuration - Microsoft Excel 2013/Excel Options/Save - Default file location - Enabled - Z:\
2. User Configuration - Microsoft Word 2013/Word Options/Advanced/File Locations - Default file location - Enabled - Z:\
The GPO is linked at the OU that contains my users for my SBS organization.
When I do a gpupdate /force on a windows 7 system with office2013 installed, and then run a gpresult/rsop, the policy appears to be applied successfully as it lists my GPO under the Applied GPOs list on the workstation:
Applied GPOs
Default Domain Policy dyndns.local AD (24), Sysvol (24)
U-Office2013 Default Save Location domain.local/SBSusers AD (6), Sysvol (6)
In the gpresult report, the applied settings appear under:
Administrative Templates
Extra Registry Settings
software\policies\microsoft\office\15.0\excel\options\defaultpath Z:\ U-Office2013 Default Save Location
software\policies\microsoft\office\15.0\word\options\doc-path Z:\ U-Office2013 Default Save Location
BUT, when I go to the workstation, and check office->options-Save-default file path, the path has not been changed to what the GPO is pushing.
The strange thing is that in my test environment running 2008R2 server and Win7 with Office 2013 and identical settings the default save location is applied and works as expected.
Any ideas?
I've already tried re-installing the ADMX templates and re-created the GPO's several times.
I should also note that other GPO's on the SBS2011 server such as the folder redirection GPO work as expected on the same windows 7 system. It just appears to be an issue with the default save location in office2013 and other Office 2013 related GPOs which
utilize the recently added ADMX template that don't seem to be working for me.
Thanks in advance.

Hi Justin,
Thanks for your reply. I have tried several different user accounts (all have local admin privileges to the workstation) with the same issue. The default save path does not get applied from the GPO to any of the users i've tried. Here's the steps I took
per your suggestion:
1. log on as a user who has never logged onto the workstation before.
2. run gpupdate /force (entered y for yes when prompted to log off).
3. Log back in as the user and open Office and check the default save path. It has not been changed to match the GPO setting.
4. Check rsop to see if the policy was applied. Rsop states the gpo was applied successfully.
I have attached the gpsvc.log file from a the session described above. The GPO Guid in question is: {DC3C93EC-7C28-48E9-BA38-FCA1E275A207}. Its common name is: U-Word 2013 Default Save Location. It's only setting is:
Policies\Administrative Templates\Policy definitions(admx files retrieved from central store\Microsoft Word 2013\Word Options\Advanced\File Locations\Default File Location = Enabled\Documents = F:\
-------gpsvc.log sections containing the aforementioned GUID start---------
GPSVC(410.1730) 09:10:51:186 ProcessGPO: ==============================
GPSVC(410.df0) 09:10:51:186 GetGPOInfo: ********************************
GPSVC(410.1730) 09:10:51:186 ProcessGPO: Searching <cn={DC3C93EC-7C28-48E9-BA38-FCA1E275A207},cn=policies,cn=system,DC=gc,DC=local>
GPSVC(410.1730) 09:10:51:186 ProcessGPO: User has access to this GPO.
GPSVC(410.1730) 09:10:51:186 ProcessGPO: GPO passes the filter check.
GPSVC(410.1730) 09:10:51:186 ProcessGPO: Found functionality version of: 2
GPSVC(410.1730) 09:10:51:186 ProcessGPO: Found file system path of: <\\gc.local\SysVol\gc.local\Policies\{DC3C93EC-7C28-48E9-BA38-FCA1E275A207}>
GPSVC(410.1730) 09:10:51:186 ProcessGPO: Found common name of: <{DC3C93EC-7C28-48E9-BA38-FCA1E275A207}>
GPSVC(410.1730) 09:10:51:186 ProcessGPO: Found display name of: <U-Word 2013 Default Save Location>
GPSVC(410.1730) 09:10:51:191 ProcessGPO: Found user version of: GPC is 3, GPT is 3
GPSVC(410.1730) 09:10:51:191 ProcessGPO: Found flags of: 0
GPSVC(410.1730) 09:10:51:191 ProcessGPO: Found extensions: [{35378EAC-683F-11D2-A89A-00C04FBBCFA2}{D02B1F73-3407-48AE-BA88-E8213C6761F1}]
GPSVC(410.1730) 09:10:51:191 ProcessGPO: ==============================
GPSVC(410.1730) 09:10:51:191 ProcessLocalGPO: Local GPO's gpt.ini is not accessible, assuming default state.
GPSVC(410.1730) 09:10:51:191 ProcessLocalGPO: GPO Local Group Policy doesn't contain any data since the version number is 0. It will be skipped.
GPSVC(410.1730) 09:10:51:191 GetGPOInfo: Leaving with 1
GPSVC(410.1730) 09:10:51:191 GetGPOInfo: ********************************
-------gpsvc.log start---------
-------output of gpresult /r-------
Microsoft (R) Windows (R) Operating System Group Policy Result tool v2.0
Copyright (C) Microsoft Corp. 1981-2001
Created On 5/30/2014 at 9:24:08 AM
RSOP data for GC\ssanders on OPTI9020-01 : Logging Mode
OS Configuration:            Member Workstation
OS Version:                  6.1.7601
Site Name:                   Default-First-Site-Name
Roaming Profile:             N/A
Local Profile:               C:\Users\ssanders
Connected over a slow link?: No
COMPUTER SETTINGS
    CN=OPTI9020-01,OU=SBSComputers,OU=Computers,OU=MyBusiness,DC=gc,DC=local
    Last time Group Policy was applied: 5/30/2014 at 9:10:47 AM
    Group Policy was applied from:      GCSBS.gc.local
    Group Policy slow link threshold:   500 kbps
    Domain Name:                        GC
    Domain Type:                        Windows 2000
    Applied Group Policy Objects
        Windows SBS CSE Policy
        Windows SBS Client - Windows Vista Policy
        Windows SBS Client Policy
        Update Services Client Computers Policy
        C-Create Syntiro Root Folders
        Default Domain Policy
    The following GPOs were not applied because they were filtered out
        Local Group Policy
            Filtering: Not Applied (Empty)
        Windows SBS Client - Windows XP Policy
            Filtering: Denied (WMI Filter)
            WMI Filter: Windows SBS Client - Windows XP
    The computer is a part of the following security groups
        BUILTIN\Administrators
        Everyone
        BUILTIN\Users
        NT AUTHORITY\NETWORK
        NT AUTHORITY\Authenticated Users
        This Organization
        OPTI9020-01$
        Domain Computers
        System Mandatory Level
USER SETTINGS
    CN=Stephen Sanders,OU=SBSUsers,OU=Users,OU=MyBusiness,DC=gc,DC=local
    Last time Group Policy was applied: 5/30/2014 at 9:13:17 AM
    Group Policy was applied from:      GCSBS.gc.local
    Group Policy slow link threshold:   500 kbps
    Domain Name:                        GC
    Domain Type:                        Windows 2000
    Applied Group Policy Objects
        Windows SBS User Policy
        Windows SBS CSE Policy
        Small Business Server Folder Redirection Policy
        U-Word 2013 Default Save Location
        U-Office 2013 Disable Backstage
        U-Office Disable Start Screen
        U-Office Trust Center Settings
        U-Word Autorecover Location
        U-Word Autosave Interval
        U-Word Disable Capitalization First Word
        U-Word Set Arial Default Font
        U-Word UI Customizations
        U-Power Plan Settings
        Default Domain Policy
    The following GPOs were not applied because they were filtered out
        Local Group Policy
            Filtering: Not Applied (Empty)
    The user is a part of the following security groups
        Domain Users
        Everyone
        BUILTIN\Administrators
        BUILTIN\Users
        NT AUTHORITY\INTERACTIVE
        CONSOLE LOGON
        NT AUTHORITY\Authenticated Users
        This Organization
        LOCAL
        Windows SBS Link Users
        Windows SBS Fax Users
        Windows SBS SharePoint_MembersGroup
        Windows SBS Folder Redirection Accounts
        Windows SBS Remote Web Workplace Users
        High Mandatory Level
-------end gpresult output-------
Thanks in advance for any help. I also have a pps ticket open with Microsoft, but they're dragging their feet.

I cannot update or install updates on itunes. It says that the location for that file does not exist. I cant even uninstall itunes as the same error message comes up.

I cannot update or install updates on itunes. It says that the location for that file does not exist. I cant even uninstall itunes as the same error message comes up.

Hi vindog60,
Thank you for using Apple Support Communities.
To troubleshoot this issue where you get an installation error with iTunes on your Windows PC, please follow the steps in the article linked to below.
Issues installing iTunes for Windows - Apple Support
Cheers,
Alex H.

Material document ,quantity and stock location for a given material

hello all,
i have a requirement like this.
in the selection screen i have,
material.....
plant....
posting document date.....
i need to get material document number,quantity,units and stock location for the above mentioned selection criteria...
what tables do i need to use..
do i need to use any BAPI or Function module..
thanks in advance...

Hi Vinay ,
Look into table MKPF & MSEG for material document
anf for quantity in MARD
Regards
Yogendra Bhaskar

My laptop had to be reimaged and all software and programs were taken off. I installed itunes again but can't access my library. I get an error message "the folder itunes cannot be found or created and is required. The default location for this folder

I can't access my itunes music on my laptop after having it re-imaged. I installed itunes again but can't access the music folder. I get the following message when I click to open itunes: "The folder itunes cannot be found or created, and is required. The default location for this folder is the Music folder.
I have an iPad2, and iPad mini, and an iPhone5 with a different number of songs on each. I want to sync everything -- should have close to 800 songs. Tried to get support from Apple but would be charged for help.

I have a Windows 7 operating system my computer runs from.

I just upgraded my mac book to 10.6.8 and downloaded the new version of itunes. When I try to open it and error message appears saying, "The iTunes Library file cannot be found or created. The default location for this file is in the "iTunes" folder.

I just upgraded my mac book to 10.6.8 and downloaded the new version of itunes. When I try to open it and error message appears saying, "The iTunes Library file cannot be found or created. The default location for this file is in the "iTunes" folder in the "Music" folder."
I have tried a few things but iTunes closes right after i click okay. Anyone know anything?

Look in your Home > Music folder. There should be an iTunes folder there and it should have a number of files and folders including one called library.itl You want to guide iTunes to that file. If you don't see that file or folder then in your next post you will have to be very specific as to what you do see or how you have your iTunes set up because that's where it should be according to default settings.

I need help every time my iTunes library updates i get this error messege: The iTunes.itl file cannot be found or created. The default location for this file is in the "iTunes" folder in the "Music" folder. but the file should be there.

Every time I have to upgrade iTunes it gives me this messege:'The default location for this file is in the "iTunes" folder in the "Music" folder.' the file should be there but I don't understand why it does this every time Apple upgrades the Itunes library. Its on the computer somewhere but it only affects this login on my computer (meaning on this Windows Account). Why does my iTunes do this? Then I have to spend hours placing all my libraries back together and all my music back into the library. Which usually takes me a few days to sort all out. What is wrong with my iTunes? The iTunes folder is a folder in my Music folder where I store the iTunes music/files/libraries at on my computer so I can have all of the iTunes files in one place on my computer.

I have a Windows 7 operating system my computer runs from.

Itunes library.itl file cannot be found or created. The default location for this file is in the "iTunes" folder in the "Music" folder

itunes library.itl file cannot be found or created. The default location for this file is in the "iTunes" folder in the "Music" folder, I keep getting this message everytime I try to install Itunes after having to remove windows 8.1 and go back to windows 8. I have uninstalled and reinstalled and it keeps telling me the same thing. What do I do?

Hi Renee31,
If you are having issues with the library.itl file in iTunes, you may find the following articles helpful:
iTunes: What are the iTunes library files?
http://support.apple.com/kb/ht1660
Apple Support: Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/HT1923
Regards,
- Brenden

BT Cabinet Locations for BT Infinity

Similar Messages

Maybe you are looking for