BT Call Reminder Display Units Clashing ( BT260690...

Hi there.  At last i have been able to post this message !!  I have recently signed up for the Caller Display service but not the 1571 (i have an ansaphone). I then bought two Display units (Code. BT 260690 ) from the internet.
If i connect 1 unit to 1 phone it works fine with an occasional check for messages after the phone has been used, but if i connect the 2nd unit to a 2nd phone BOTH units are frequently checking for messages and while this is happening my phone line is engaged.
I have spoken to the BT Help Techs and they tell me that i should be able to use multiple units without a problem. However their only suggestion was to fit a Filter on the 2nd phone (which made no difference).
My Broadband is connected to an ADSL V10 Master Socket which does away with the need for seperate filters on the phones.
My system had the new master socket fitted about 6 months ago and the wireing was checked then so there should not be a problem with my set up.  BT has offered to send an Engineer at my expence but i thought it might be worth trying the Forum to see if anyone has had a similar problem and may be a solution.
Thanks.
 Dave.

Hi. Thanks for your reply.
 No i am now back relying on my ADSL V10 Master socket with it's built in filter. Should not require any other filters on the setup.  Dave.

Similar Messages

  • Caller display units

    Hi
    I have a caller display 1000 unit, taking the back cover off ready to change batteries, several jumped out and as a consequence, having replaced batteries It no longer shows a display ??/
    Any suggetsions please ?
    ALSO Does anyone sell caller display units anymore ?  BT seem to have discontinued everything ?

    Loads on Ebay   but make sure the battery contacts are clean in the right way round and note some batteries seem to have a longer outer case than they used to have and make good contact hard,
    If any post helps tick the star box on the left
    Just cause Im paranoid dont mean they are not out to get me

  • My Iphone 5s doesn't ring anymore (sms, whatsapp, phone call, reminder in the calendar, etc)

    My Iphone 5s doesn't ring anymore (sms, whatsapp, phone call, reminder in the calendar, etc) I can't find why.
    I trieds to go on Youtube and for that I have sound so it is just for the rings.
    Can somebody help me please?
    Thank you so much!
    Mary

    Have you checked your mute switch (right above the volume buttons)? If you see orange, it is muted and will affect the rings, but not the audio on YouTube.
    Just toggle the switch so you don't see the orange and check again.

  • How can I connect my MBA 11" 2012  to my Imac 21.5" mid 2010 as a display unit. Connected using a mini display port cable and this did not work. Any guidance welcome. Thanks. John

    I bought a belkin mini display unit cable( new) and connected the thunderbolt port in the MBA ( 11" , mid 2012) to the Imac mini display unit port using this cable. Pressed the CMD & F2 keys on the Imac keyboard as required but this did not work. Should I try with another cable ? Should i try with a thunderbolt cable ( recommended by appple support ) -- but they too were not sure about this. Is the Mid 2010 21.5" Imac not able to function as an display unit? Any guidance would help and will be much appreciated.

    Welcome to Apple Support Communities
    Only the 27-inch iMac and Mid 2011 and newer iMacs can be used as an external screen, so you can't use your Mac as an external screen. See > http://support.apple.com/kb/PH11302
    You can still use your iMac as an external display, using an application like ScreenRecycler

  • How to stop the call summary display on home screen?

    How to stop the call summary display on home screen?

    Here are the solutions I can think of (if no one here responds with something better):
    1. Open Settings and then Phone within the Settings screen and see if you can find a setting there for the call summary. The Phone submenu under Settings would be the most likely place.
    2. Open Settings on your iPhone and go through each item including all of the items within each main item. Within about 10 minutes you should be able to get through all of the settings and find the setting if it exists on your phone. There is no such setting on my phone but it is possible that Airtel has a custom menu with that.
    3. If you still haven't found it, you could check a) Airtel's support site and/or b) an Airtel specific forum.
    4. If still no luck, I would call Airtel and ask again and if you get the same response ask for the location of the setting (or to speak to someone who can tell you).
    Good luck.

  • XF-I & Call Of Duty-United offensive EAX odd noi

    When I set Call of Duty: United Offensi've to use EAX (,2 or 3) I'm getting sudden bursts of environmental sound. Maybe 2 or 3 every minute or so. e.g. sudden bursts of tank noise or footste
    ps.
    I'm running a Shuttle SN95G5, X-FI Extreme Music, XFX 6800GT, Gb corsair RAM, Athlon FX55. All running latest drivers.
    Anyone any suggestions?
    I contacted Creative Tech support but they suggested turning EAX off. This solvesthe problem but does leave me wondering exactly what I've paid for.

    I think this is the PCI latency issue again. I see the same thing. It happened with the Audigy 2 ZS as well, and it still happens with the X-Fi (although less often). You can try moving the card to different slots and messing with the PCI latency of your graphics card which may be too high. Do a search on google. I haven't had luck with changing PCI latency, but I wonder if that is because I have a PCI express motherboard. I don't know if a PCI express graphics card is subject to PCI latency parameters like an AGP card is (it is an ENTIRELY different bus).
    As to whose fault it is, I suppose both Creative and the developer could blame each other. The problem is that hardware DirectSound3D/EAX acceleration doesn't seem to fail gracefully in this case. When your graphics card is overloaded, you drop frames, which is reasonable. When the X-Fi is overloaded, you drop sound samples which can result in cracks and pops and other distortion.

  • Full screen caller image display

    Full Screen Caller image was one of the best feature of an iPhone that made look iPhone simpler and fantastic to use..
    This particular feature seems to have been last with the upgrade to iOS 7.1..
    Please fix this issue..
    Full screen caller image display makes the phone look beautiful and wonderful when a known person is calling

    I agree with you on  the full screen view for when a users contacts call them. I hesitated upgrading, Apple has now joined the ranks for screw-ups! Since the late  Steve Jobs left this earth, Tim Cook has royally screwed-up this company! Customers here in th U.S and arouund the world are the ones shelling out hundreds of dollars for a product that is the best next thing to revoluntionize the way we communicate with others. But it seems that $600+ dollars gets us junk and a device not tailored to us, the users. I want to call them "M!cr0$oft Apples!" Give us the ability to go back to iOS6. Let us choose! We the customers have made this company rich, full of wealth beyond their greedy little hands. Give us the ability to choose what OS we want to install. Their should be a transparency relationship between the customer with the money, and worker who will work for us to render a product that we "the users," want" and not want a senior desinger assumes we think is good. Remember, this is all thanks to a legend who we all know and respect as ("in my own opinion), the father of modern communication Steve Jobs. SJ worked till his last days here to creat a masterpiece, T.C came on board and took a huge "memoryDUMP," and disregarded his visions. If your passionate like me about Apple and what Steve Jobs stood for, then  help me create a petition to make this company see that we "The customers are ALWAYS right!"
    Missing and need back:
    Transparency on the dock and icons
    Working Wifi, and imessage
    Better Battery life!!!
    Reverse the icons back to iOS7.06
    Fix maps
    Unless the designers are gothic in nature (I love Goth!!); dont make our phone dark and heavy on the fonts.
    I dont know about you, but I' am tired of hearing excuses from Apple and its CEO!
    PRETTY MUCH, REVERSE THE UPDATE OR WE WANT OUR MONEY BACK!
    As th general public alredy knows, Apple will never listen or read these suggestions" They sleep soundly in thier 2.5millon homes, and respectively. Why care about those people that are paying thier salary pretty much! Listen up board of directors.....Fire Tim Cook, Hire a go-getter, Micromanage manic that will continue Mr. Jobs legacy and nip this disaster in the bud!  Tweet this, FB this! Let make the world realize we will not take it anymore! Fix the dam problems!

  • No Caller Number Display since August 2014

    Caller number display ceased to function on 9th August last year.
    Since the we have been through the fault reporting process 3 times. Had an aborted (by Openreach) engineer visit and received a statement letter from BT saying they are looking in to the problem, it will take time etc etc.
    My equipment works at my neighbours house. The neighbours phone has been tried in my house and does not work. I have removed filters, unplugged everything, tried the Master Socket. None of these things works.
    It is very tough to run my business without Caller Number Display.
    Can it be fixed???
    If I switch to another provider will Caller Number Display then work??
    Help!

    Hi Unclenorm,
    Welcome to the community forum. I am sorry to hear that you are having problems with the Caller Display. I'll be able to take a look at this for you. Please can you send me in your details using the "Contact The Mods" link found in my profile.
    Thanks
    PaddyB
    BTCare Community Mod
    If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
    We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)

  • How can i display units only for the result set

    hi
    i do not want to display units (example: $ or %) for my key figure columns but i want to display units to the result.
    how can i do that

    Hi Surya,
    I don't think it is possible to have both non-unit and unit in the same kf.
    One potential workaround to do this is to create a calculated key figure/ formula that use the NODIM function for single values. Example: NODIM(0AMOUNT). Then, create a calculated key figure/formula that computes overall result on the same kf and supresses individual values but does not use NODIM....perhaps this can help you work out a solution.
    Hope this helps.
    Regards,
    Petter
    Message was edited by: M Petter

  • Calling and displaying BAPI  values when the initial view is displayed

    hi Gurus,
    I am creating an application where I am calling a BAPI.
    Now my problem is that the values should be called and displayed when I am starting the application ie in the first view itself.
    Is there any way to execute the BAPI so as to retrieve the values from back end and get the values displayed in the initial screen/view.
    Or else is there any onPageLoad method which can be used in such cases.
    please help me how to go ahead.
    Thanks and regards,
    kris

    Hi
    Create a method in controller and insert the code,
    wdContext.current<BAPI>Element().modelObject().execute();
    And call the method in view, and check the size of BAPI's output node.If it is greater than 0, your BAPI is returning something. using any loop and get the Output
    Saravanan K

  • Not waking up from sleep whilst back of display unit getting very very hot.

    I have had my first mac now for just 6 months, over the last 6 weeks or so it has intermittently failed to wake up when it goes to sleep for prolonged periods of time i.e striking keyboard, moving the mouse or pressing the power button. As well as this the back of the display unit is getting extremely hot to the touch. The only way to resolve this problem is to pull the power cord and let the display unit cool down before it will switch back on again which can take a couple of hours.
    Has anyone else experienced or is experiencing this problem.
    James

    have you tried to just let it wake up? I had an issue (similar) were the MBP would be asleep, I would mouse the mouse or hit a key to wake it and it would sound like its waking up but the screen was blank. I would either close the lid or just power down. One time I just let it sit and with in a few minutes it came on and the frequency got further apart.
    but I haven't have any real issues since 10.5.2 and a few other updates.
    +When in doubt . . . seek a genius out . . .+

  • Call Reminder - PROBLEM please help

    I showed my boss how to use call reminder on his cell phone and now everytime he leaves my office it reminds him to call me ... this should have only happened the one time he used it but his phone is now reminding him to call me everytime he leaves my office.  How do I get this to stop?

    I haven't had that happen. Has he tried any troubleshooting at all? Like rebooting his phone?

  • Call and display Xcelsius SWF file from an SAP Transaction

    Hello Experts ,
                          Could you please suggest if it is possible to Call and display Xcelsius SWF file
    from an SAP Transaction and if Yes how can this be achieved.
    Regards ,
    Jerin.

    Jerin,
    It is possible to embed a Xcelsius model into an SAP WebTemplate (Anil promised to write a blog about this very soon). After that you can include the WebTemplate in the GUI menu, Role menu or Portal.
    Henk.

  • Query displaying unit error

    hi, after implementing new sps we found out problem with displaying unit by quantity keyfigures, we are on SAPKW70020. When I execute query I find following:
    Material      Quantity
    XZY            11.520 ***
    Instead of unit there is  11.520 ***
    Have You any advice?
    Thanks

    Hi,
    these r the main reasons pls can u look it,
    1)may correct field is not assigen to the unit  ok if ur assigend correct one only may multiple units will be there(like kg,to,ea) at that time in query properties u should not slect the displsy scaling factors for keyfiguresthen it shows all unit measures.
    2)if u donot want the units along with quantity then u create the CKF for that keyfigure ,in  datafunctions there is a function NODIM(ur keyfigure)and save that cKF and kep that CKF instead of kf.
    Thanks & Regards,
    k.sathish

  • New document - changing the displayed unit in width/height?

    Hi all,
    Sorry for this basics question relating to InDesign CS5...
    When creating a new document, with a custom size, the default size is showing as XXp00 - I don't know what the 'p' means nor it's relation to other units such as cm or mm.
    Is there a way for the default to be cm, or mm?

    XXpYY is the established convention for displaying picas (6th of an inch) and points (12th of a pica). 3p0 is 3 picas,0 points, or half an inch. 13p6 is 13 picas, 6 point, or 2.25 inches.
    You can type any units you like in any dialogue or panel and InDesign will handle the conversion to the currently displayed units. If you want a page 14 inches wide, just type 14" and InDesign will accept that and display it as 84p0.
    You cannot change the default units while a modal dialogue (like New Document) is open. You can change the default units in Preferences. You can also change the displayed units in the current document by right-clicking on the ruler. Each ruler remembers its own units, so either change the units for both rulers or right-click on the intersection of the rulers at the top left of the window.

Maybe you are looking for