BT DNS again not working correctly
again BT DNS server not working correctly. Some of the websites not openig.
To get all you website opening you need to change the DNS settings.
I'm using opendns 208.67.222.222 and 208.67.220.220
I reset all my pc, hub and open reach modem before I post here.
It's standard procedure I do when I have internet issues.
It wasn't working correct;y for about 45 min when I've change my DNS settings. Then I've checkied it again about 1h later, was still same.
When I checked it about 3h after initial broblem discovert it was all working fine.
Me and my frined we noticed that BT DNS server is playing up on regular basis 1-2 times a month.
Typical it's for about 20-30 min then is back to normal (unless it's like about 1h ago when it was f***ed for 2-3 days).
Similar Messages
-
I have OSX 10.7.5 on my imac, my idvd is not working correctly. Should I re-download this version again , do you think that it will help to improve the idvd operation?
First, iDVD is not and never has been part of OS X. If iDVD is not working correctly, then you should investigate possible problems with that application, support files, preferences, or cache.
Of course you can always reinstall OS X if you wish:
Reinstalling Lion/Mountain Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless. -
Exchange 2013 - 2007 coexistence - activesync 2007 does not work correctly
Exchange 2013 SP1. On going Saga- Last night we cut over to full co-existence with DNS changes for use of legacy namespace and had to roll back again. We had only two issues but one was considered a show stopper.
The main issue was that Active Sync would not work correctly for 2007 users. It failed the exchange connectivity test and would only work on a device if the domain was entered - or if the legacy namespace was entered manually. That would have meant
chaos for several thousand users so we rolled back. (It worked perfectly for 2013 users).
The error given by the test was "foldersync failed" when I drilled down into the detail. It found autodiscover but failed after the initial handshake. (All other tests passed for 2007 and 2013 users)
We tried:
1. Populating both Autodisover internal and external urls with the legacy namespace
2. Populating only the internal url and leaving the external blank (both 1 and 2 had the same result)
3. Leaving both URLs blank to force 2013 to proxy to the 2007 cas (totally broke it- would not resolve at all)
I don't know if this is related but SSO is failing for 2007 OWA - two prompts.
Environment notes- all internal co-existence is working and the internal LTM F5's are working. Externally we use 2 GTM F5 to the LTM f5's to Ex2013. 2007 has SSL being passed through all the way to the CAS. Servers are split into CAS and MBX over 2 DC's.
Everything else externally was working when we cut over.
any and all help appreciated
TonyHi,
Glad to know that you have found the solution.
Thanks for your generous sharing.
Have a nice day : )
Thanks
Mavis
Mavis Huang
TechNet Community Support -
Function keys are not working correctly
I've been looking all over the various threads and I can't find an answer that solves my problem.
Here are the details:
I bought the computer in the U.S. where I live.
I have a iMac 2.4GHz intel Core 2 Duo EMC 2133 with a 20" screen. Bought it new in February 2008.
I have Mac OS X 10.5.8 (I am waiting for my order for OS Snow Leopard to come in!!)
I have been using a wireless mouse and Keyboard (Love not having cords!)
Recently, my wireless keyboard got a short and quit working. I went down to the apple store and got a new wireless keyboard.
I had the computer with me at the genius bar so, yes, the apple employee saw exactly what I have.
I took it all home got the thing all put back together and got the new keyboard paired up and working with the computer.
Here are the problems:
Went to go use the function keys while using iTunes and found they weren't working properly. The F10, F11 and F12 do not control the volume of sound as the keyboard indicates they would, they instead activate dashboard, spaces, and application windows.
Following the advice of other threads, I looked over in the system preferences and made sure the "Use all F1, F2 etc." box was unchecked (it was unchecked), things still didn't work.
I tried the fn key but it appears to not work at all it has no effect on the functioning of the function keys.
I went under keyboard shortcuts in system preferences and found the F10, F11 and F12 keys, it confirms that those keys control spaces, dashboard and application windows as they are performing but shows no options to either reassign to volume control (as marked on the keyboard) or make the fn key work.
I've gone back and forth trying various combinations of checked and unchecked boxes to see if anything would work, so far I've come up with nothing.
A couple more important or interesting facts:
Yes I have turned off and taken the batteries out of the old keyboard. My bluetooth connection currently shows it as disconnected.
I have restarted the computer.
One thing I find odd; when I go under preferences and go to Keyboard and Mouse when I go under the section "Bluetooth" it shows Bluetooth mouse with the name of the mouse and the battery level. BUT nothing is showing up under bluetooth Keyboard, I can't figure out how to change this and don't know if it is contributing to the problem.
When I go under the bluetooth logo on the top bar I find the mouse and both keyboards referenced, the old keyboard is shown as disconnected and the other two are connected. I have tried to update the device's name but it doesn't seem to let me.
I have double clicked on the device under bluetooth and it shows the new keyboard as discoverable, paired and connected. Hence, I am using the new keyboard to write this inquiry.
Please, any assistance would be of great help. I have tried to be thorough in order help narrow the possible problem. Thanks!!Hendry
Just thought I'd let you know. Our suspicions were correct, it was the OS. After I installed Snow Leopard (10.6.8) all the problems were corrected. I also updated the RAM from 1 gb to 6 gb. The mac is working all around better. Sorry it took so long to get back to everyone. My superdrive had pooped out. Rather than replace it I got an external drive from OWC connected with firewire 800. So far everything is running very well, as far as I can tell this external drive is better than the original superdrive. My superdrive has always acted funny, infact I returned the first mac I got after a week because its superdrive was also malfunctioning. Anyway, all that to say everything seems to be fully functioning again.
Roy
Re: Function keys are not working correctly -
Sound blaster not working correctly?
Sound blaster not working correctly #I have a 64 bit, windows vista system.
A Logitech Z-5500 Digital speaker system (one woofer, center speaker, left, right, rear right, left rear speakers, and a seperate control head).
I have an X-fi gamer sound card.
I recently formatted my hard dri've and reinstalled everything. Trying to make everything happy again. Here is my problem:
When I use the Creative Console Launcher (CCL), my front right speaker tests fine. My front left speaker comes out of the woofer. And no other speakers will test at all. It does this in all modes (2., 4., 5. and 7.).
When I play some music, it is coming out of all of the speakers. But it won't test properly in the CCL. So, do I have an issue, does what the CCL is doing not matter, or something else In some games, hearing what direction stuff is coming from matters, so if it is sending sounds to the wrong speakers, then I need to figure out a fix.....hence my post.
Thanks for any help you can give, RobertWell, as the official documatation states, the Archlinux is for more or less advanced users, and if you're not one, we will make you one
First of all, if you compiled your sound as modules, try putting this in your rc.local:
stat_busy "Activating Sound"
/sbin/modprobe your_sound_module
/sbin/modprobe other_sound_module
/sbin/modprobe yet_other_sound_module
stat_done
Change your_sound_module stuff to your module names as you configured in the kernel, of course.
Second: in order to have two or more sound apps working at the same time, you need some kind of sound server. For default one (esd), uncomment esd in /etc/rc.local (remove ! before it) . After that, you'll have to configure your sound apps to use esd. I know that this is extremely easy with xmms and xine, dunno about others. I do not use esd, because my favorite games (quake3 and half-life) require direct access to /dev/dsp.
And remember: nobody blames for asking 8) -
I just updated the last version of OSX Mavericks on my MAc Pro and my thunder bolt display is not working correctly. Could you please help
Reset the NVRAM/PRAM and Reset the SMC, then try again.
-
Internet Explorer 11 "Enterprise Mode" do not work or do not work correctly!
Dear community,
Since yesterday we test the Feature "Enterprise Mode" for "Internet Explorer 11". However, we have many problems
with this Feature. We have configured it as described by officially instruction by MS, but it does not work
properly. Here is what we have done exactly to test this Feature:
In Registry Key " HKEY_LOCAL_MACHINE \ Software \ Policies \ Microsoft \ Internet Explorer \ Main \ Enterprise Mode " we have created the Entry " Site List " and create the string " Enable" . In the
String "Enable" we have added no value .
In Case of String "Site List" , we have specified the path to the XML file , as value of this String.
The XML file was created with the Site List Manager from Microsoft
And now, we regocnized following Problems:
The "Enterprise Mode" ist only "active", if the User(!) check "Enterprise Mode" under "Tools"...!
The site list is seemingly ignored, although in the Registry "currentversion" is pulled correctly, everytime we change
the XML File. So we think "SiteList" is configured well.
On one of our test computer freezes Internet Explorer 11 , if you try to hook the corporate mode
In Summary, it seems to be configured properly but it even do not work or not work correctly.
Our goal would be:
Enterprise Mode + access to the Site List by IE11 should be "on" by Default!
Entrys of sitelist.XML should be filtered and shown in "Enterprise Mode" or/and the right "DocMode", as configured.
The user should have no chance to check on or off the"enterprise mode"
We use "Windows 7" on all our Clients, as test Clients are also running the same operating System...
Please reply
Thank you very much
Greetings!
Ps: Please do not be angry if pronunciation or grammar do not fit well. English is not my nature language (my nature language is german)Hi，
According to your description, seems the end-users can manually turn on\off the enterprise mode, If you don''t want this, you can disable the option.
Computer(User) Configuration > Administrative Templates > Windows Components > Internet Explorer\Let users turn on and use Enterprise Mode from the Tools menu option
Disable this option, user will not have "Enterprise Mode" under "Tools", after that, please run gpupdate /force to update the policy, and get "Use the Enterprise Mode IE website list" applied again in the target system.
After that, the enterprise mode website list get applied again, and user don't have an option to disable it.
Yolanda Zhu
TechNet Community Support -
Why can I not import pictures any more?
Lightroom says "Your Lightroom 5 64-bit does not work correctly"
Technical informations:
PC with Windows 7 64-bit, Lightroom 5.7.1 64-bit installed.
What I have done:
I downloaded the newest LR 5.71 and installed it again - mode repair; without success
I checked my PC with Norton 360: full scanning and optimizing registry
I restarted the PC and than I installed the LR 5.7 again - repair
Trouble 1:
Two days ago I could work with my LR 5 and to import pictures from a SD was no problem. Now I can start LR 5 and I can watch/modify pictures, but as soon as I try to import new pictures LR 5 stops and gives the message "your LR 5 64-bit does not work correctly - searching for solution". I have not changed anything in my computer since lasttime LR 5 worked properly, only the registry was optimized by Norton 360.
Trouble 2:
I live in Switzerland and my language ist German. I dit not find a place where I can present my problem in German, e.g. a phone number oder email-address oder german-chat. My English is to week for a discussion for computer problems and do understand it.
Help:
I would very appreciate if anybody can help me, either to trouble 1 or to trouble 2. Thanks.Sehen Sie diesen Beitrag:
Photoshop CS4 & Lightroom 2.6 X64 funktionieren nicht mehr
Wacom Tablet-Treiber-Problem? -
Since updating my Late 2010 iMac to Moutain Lion the sleep function does not work correctly. They system keep waking up for no reason. The monitor comes comes day or night. I cannot figure out a fix or work around. Any ideas?
Please read this whole message before doing anything. This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it. Step 1 The purpose of this step is to determine whether the problem is localized to your user account. Enable guest logins* and log in as Guest. For instructions, launch the System Preferences application, select Help from the menu bar, and enter “Set up guest users” (without the quotes) in the search box. Don't use the Safari-only “Guest User” login created by “Find My Mac.” While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin. Test while logged in as Guest. Same problem(s)? After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it. *Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing. Step 2 The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login. Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows:
Shut down your computer, wait 30 seconds, and then hold down the shift key while pressing the power button.
When you see the gray Apple logo, release the shift key.
If you are prompted to log in, type your password, and then hold down the shift key again as you click Log in.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs. The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. *Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode. Test while in safe mode. Same problem(s)? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of steps 1 and 2. -
When I use iTunes without connecting my iPhone, it seems OK. When I connect the iPhone, after the sync has been performed, I get a message that my iTunes is not working correctly and has to be closed. Is anyone else having this problem or know how to address it.
Thanks.Thanks. Before I saw your reply, I shut down my iPhone fully, restarted it (I had to reset the defaults) and reconnected. The problem did not reoccur. It also seemed to correct a problem I was having the "weather" function on my iPhone. Thanks again.
-
We have the strange situation, that filters in calendar views are not working correctly (anymore?).
If i set up a filter to search for my name as attendee, teaming still shows all entries instead of only just mine. This behavior applies to customized and standard calendar views.
Filters for (customized) file folders still work as expected.
Any ideas?jasi,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/ -
I have an iPad 5.1.1. The calendar sync has started to not work correctly. I have it checked "All events," but it only displays the last two months for my individual entries. My repeating entires do go back further, though. How do I fix?
HI Jason269. Thanks for your reply, however I wrote that I already have "All events" checked. If All Events is checked and it doesn't diaplay all events, how do I fix? It seems this is a common issue, as I have read many others on here state the same problem.
I believe my problem occurred when I synced my iMac calendar to my iPad calendar using yahoo. Yesterday, I unsynced them on my iMac controls. When I checked my iPad calendar, all of my old entries reappeared - but only for five seconds and disappeared again. So, the data is saved and still there but cannot be displayed, even when I have All events checked. In fact, it only shows my individual entries for the last two months, but does show all my recurring entries. If I switched to last six months, I will see everything for the last six months. If I switch back to all events, it is only for the last two months.
As I mentioned, others on here have expressed exactly the same issue, including the two month example and having used yahoo.
For legal purposes, I need to be able to use the information from my indidual calendar entries in an upcoming court case. So I really need to fix this ASAP! -
Bootcamp not Working Correctly on Macbook Pro
Hello,
I am trying to install Windows 7 or 8 onto my Macbook Pro with Bootcamp.
Once I have opened the Bootcamp program it all works fine and I can go through the steps perfectly, it will appear to partition the HDD correctly and it will recognise the Windows install DVD correctly.
However, once my Macbook Pro restarts at the end of the process it boots up and the screen stays white, nothing happens and since I have a gaming keyboard and mouse the lights light up on it for about 5 seconds when it restarts then they go off (Off meaning they aren't powered). The screen will stay white for aslong as I can tell, I left it for 3 hours and the screen was still white.
So I thought there may be a problem with how it selects the the startup disk, so I boot it up into disk utility then select the DVD again and it stays white, again.
Anyone know why this is not working correctly? I have tired this with mutliple install DVD's whether they be Windows 8 or Windows 7. I also do not want to use a program that creates a virtual machine, I would like to run Windows 7 to the full so that I can play games with the maximum amount of FPS.
If you have any questions do not hesitate to let me know.
Thank you for your time.
Best Regards,
Kieran J.Does it now work only on battery? or using the power supply?
If only on the power supply use a grounded plug.
Otherwise try reseating touchpad cable. Post the size and year of your MBP. -
External usb sound card is not working correctly
When my computer usb sound card is working correctly. If your computer to sleep and wake up the sound card is working correctly. If you disable the sound card and connect again, it appears extraneous sound on the background music playing. Each time the sound is different. The sound is very similar to not match the sampling frequency. If the computer is rebooted, then the sound card is working properly again.
Soundcard Infra-sonic.com model Amon.
I have not experienced problems when using the same card with Mac OS 10.5.8 with the drivers for Mac OS 10.5
Manufacturer issued driver for Snow Leopard, but the card still does not work correctly.
Also such problems, other users complain about an external USB audio card. None of the users can not find a solution to this problem.Contact Infra-Sonic tech support.
-
Three Point Edit not working correctly :(
Hi there,
first of all I'd like to say thank you Adobe for listening to your users. And I hope this one gets noticed right away....:
It appears that 3 point editing ist not working correctly.
Right now I'm editing a video and I heavily rely on 3 point editing.
I have quite a lot XDCAM EX 50i clips which are all in one sequence that is used as source.
Coming from tape workflows I really don't like clicking clip after clip...I need to edit
Now fortunately one can choose to either have a sequence as source edited in nested or as individual tracks. Very nice!
Very bad is that 3 point editing only works when "nested" is activated. Again, very bad!
As soon as I want to use my source sequence with its individual tracks and hit (.) or (,) just nothing happens. Hmpf!
Come on guys, that is essential editing stuff, not fancy speech detection blabla...sorry but this is mega-annoying right now....
It says "Pro" right after "Premiere". So please make it pro! Professionals need ROCK SOLID essential functions.
Make us editors happy having switched from Avid/FCP etc.
Make essential stuff rock solid. That's what makes an app "pro".
Cheers and please mind my harsh words. Just a little upset right now. (I know that's not pro either )bmfm_ wrote:
I have quite a lot XDCAM EX 50i clips which are all in one sequence that is used as source.
Now fortunately one can choose to either have a sequence as source edited in nested or as individual tracks. Very nice!
Very bad is that 3 point editing only works when "nested" is activated. Again, very bad!
Hi bmfm,
I think I know what's going on. The behavior you describe happens when you try to edit back into your original sequence. Can try making a new sequence to cut your selects into? See the page in help for details: http://helpx.adobe.com/premiere-pro/using/edit-sequences-loaded-source-monitor.html
Thanks,
Kevin
Maybe you are looking for
-
Replaced value is not getting relected in IDOC segment field
Hi, Need your help for the below issue. I am replacing the PO # with Delivery Doc # . But the replaced value is not getting reflected in the IDOC segment field(e1bp2017_gm_item_create-po_number.). Function Module which I am using is IDOC_INPUT_MBGMC
-
Safari Ver 5.1.10 Fix For The "Old Style" Google Problem...
@ The mods/ Admins I'm not sure if this is the correct place to post this but I cannot seem to find the thread where people were discussing the recent problem Google introduced by forcing some versions of Safari to revert back to their old style Goog
-
Mpe file from email won't play in realplayer or quicktime
12-10-05 realplayer (10.0.0 v331) sayz "RealPlayer cannot play this media file with the installed version of Quicktime". quicktime (version 7.0.3, Player Version 7.0.3) sayz "Alert. Quicktime cannot open the file: xyz.mpe it is not a file that Quickt
-
My ipod touch 4th generation's audio jack is no longer making a connection with my headphones, i dont think my ipod is under warranty and therefor would i be able to pay apple to fix my ipod.
-
I recently purchased a Sony HT-SS360. I connected it from my blu-ray (Pioneer BDP-120) through it to my LCD via HDMI cables. When I play any disc (blu-ray or DVD) I get no voice. I connected my blu-ray directly into the TV and it's all fine. I fooled