BT drop line socket. No! I do not have an NTe5 soc...
Hi, the drop line enters my house (built 1977) and connects to a simple oval junction box with four screw connections for incoming and outgoing wires.
As I am getting very erratic (not erotic) broadband speeds varying from 150kbps to the best 3.9meg in a 8meg area I decided to rewire the property to see if that is the problem as the BB supplier (Demon) says the problem is within my property. Demon seem to be insistent I have a NTE5 socket!
To test their theory I have taken a short wire to my own master socket from the incoming drop line socket as described but no improvement.
My question is this......I appreciate I will have an erotic experience if I touch the BT terminal socket but what can I do to improve connections from that? Do I install a NTE5 alongside it and go from there?
Solved!
Go to Solution.
you might find help here http://www.kitz.co.uk/adsl/socket.htm
or even here http://www.jarviser.co.uk/jarviser/howto3.html
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.
Similar Messages
-
I have a BT line/socket, but BT does not have it o...
The first time I signed up with BT, I told them I had a BT socket.
Consequently, the very nice man went to check the records and discovered that yes, there was a BT line in my house, but it was under a different address name (I have no idea why I have two addresses!)
Now I am signing up with BT again, same residence, but everyone keeps insisting to me that there *Is no record of having a BT line at that address, and that I have been completely disconnected"
Anyhow, I spent 5 hours on the phone being tossed around departments in a circle - this does not bother me, what bothers me is that I have to wait 3 gruelling weeks for an engineer to come to my house to say nothing needs to be done, then activate it.
How on earth does one speed up the process? I clearly don't need a line installed. I just need it activated again at the hefty sum of 125 £.
Any advice is appreciatedJust an update.
Finally got through to someone capable in the BT help department. He said he can activate it within 3 days instead of '3 weeks'
Just letting everyone know that BT does get many things wrong *cross* I've been lied to and misled, but all that doesn't frustrate me as long as I get my line back up and running >:/
Problem: BT's records and refusal to admit I have a line in my house (which I can see with my own two eyes)
Solution: Tell them they're wrong and make them change their records.
Total hours on phone: 8. -
Aerender error: "Unable to execute script at line 95. Window does not have a constructor"
A BG Renderer user is getting this error when running aerender version 10.5.1x2:
"Unable to execute script at line 95. Window does not have a constructor"
The render proceeds but the process never completes which is preventing the rest of the BG Renderer notifications from triggering. Any idea what this error means and how to fix it?
Thanks,
LloydI guess we'll have to wait for Adobe to answer what could be causing the transmission to drop on Line 95. Todd's out of the office for a month or two, but maybe someone else can shed some light.
-
Error optimizing formula for [mbrName]: argument [] may not have size [] in function []
Hi all,
Please help me
I wrote the following script:
182 "Commercial income tax"(
183 IF ( "Payment of principal - Short-term" <> #MISSING)
184 "Commercial income tax" = 1;)
It throws following error:
Error:Error optimizing formula for [Commercial income tax] (line 182): argument [2] may not have size [-4] in function [@NE] Rule PandL.
What the meaning of these word?
argument [2]
size [-4]
Is there another way of accomplishing the above?Yeah, Anthony,
I ve just written Calculation Scripts 6 month ago.
Your question: "Commercial income tax" and the "Payment of principal - Short-term" members are Accounts ?
My Answer: Yes, they are.
My full IF statement:
182 "Commercial income tax"(
183 IF ( "Payment of principal - Short-term" <> #MISSING)
184 "Commercial income tax" = 1;
185 ELSEIF ( "Payment of principal - Short-term" == #MISSING)
186 "Commercial income tax" = #MISSING;
187 ENDIF;)
Warning Error:
Error:Error optimizing formula for [Commercial income tax] (line 182): argument [2] may not have size [-4] in function [@NE] Rule PandL
It is not Error if I write following Script:
182 "Commercial income tax"(
183 IF ( "Payment of principal - Short-term" <> 0 or "Payment of principal - Short-term" == 0)
184 "Commercial income tax" = 1;
185 ELSEIF ( "Payment of principal - Short-term" <> 0 and "Payment of principal - Short-term" != 0)
186 "Commercial income tax" = #MISSING;
187 ENDIF;) -
Unexpected: "may not have a type qualifier" error
Hi,
When I uses a 3rd party auto pointer utility, an unexpected "may not have a type qualifier" error raised. I hacked into the code and able to reproduce the problem with the following program.
Any one have workaround or solution for it?
Thank you very much.
Compiler version:
$ CC -V
CC: Sun C++ 5.7 Patch 117830-09 2006/11/01
OS version:
$ uname -a
SunOS niss165 5.10 Generic_118833-20 sun4us sparc FJSV,GPUZC-M
Compilation output:
$ CC main3.cpp
"main3.cpp", line 11: Error: func1 may not have a type qualifier.
"main3.cpp", line 45: Where: While instantiating "AutoPtr<BarFoo<Bar, Foo<T>>>::~AutoPtr()".
"main3.cpp", line 45: Where: Instantiated from non-template code.
"main3.cpp", line 11: Error: Cannot use AutoPtrRep<BarFoo<Bar, Foo<T>>>* to initialize int.
"main3.cpp", line 45: Where: While instantiating "AutoPtr<BarFoo<Bar, Foo<T>>>::~AutoPtr()".
"main3.cpp", line 45: Where: Instantiated from non-template code.
2 Error(s) detected.Test Program:
template <class A>
class AutoPtr
public:
AutoPtr(void)
~AutoPtr(void)
AutoPtrRep<A>::func1(rep); // compilation error
private:
AutoPtrRep<A>* rep;
template <class C>
class AutoPtrRep
public:
static void func1(AutoPtrRep<C>*& rep)
// do something
class Bar
template <class T>
class Foo
template <class E, template <class T> class F>
class BarFoo
int main()
// lead to compilation error
AutoPtr< BarFoo<Bar, Foo> > ptr;
// no error
//AutoPtr< Bar > ptr;
// no error
//AutoPtr< Foo<int> > ptr;
}Message was edited by:
germancheungThis bug is fixed in the Sun C++ 5.8. If you have a
service contract you can escalate this problem for
Sun C++ 5.7. It looks like there is no workaround for
this bug.BTW, do you have the bug ID for this specific error? coz I need to show evidence for it to give reason for an upgrade.
Thanks. -
Cannot send email. When I click Write the window does not open properly. Does not have the "send, spelling, attach, security, save line there. Then when I click File, then Send now it will not send. A message comes up saying my SMTP server failed. Have check and everything appears to be o.k.
Hi Stephen,
What version of MS Office are you using?
Are you facing the issue similar to that mentioned here: Acrobat/Reader: Attach to Email button not working for PDFs referenced from long URLs
Open Acrobat. Use the click-path Edit - Preferences - select the Category "Email Accounts". In the dialog there is the "Add Account" drop-down. Select "Add Other". The "Add Webmail Account" dialog presents. You'll fill out the dialog's fields with Outlook.com settings. (don't forget the "Advance Settings" button)
From a look-see on the web it appears that the following are the needed settings. BUT, you'll be wanting to validate.
The Outlook.com SMTP server settings for sending outgoing messages from an email program on desktop, cell phone or mobile device are:
• Outlook.com SMTP server address: smtp.live.com
• Outlook.com SMTP user name: Your full Outlook.com email address (not an alias)
• Outlook.com SMTP password': Your Outlook.com password
• Outlook.com SMTP port: 587
• Outlook.com SMTP TLS/SSL encryption required: yes
For incoming messages from an Outlook.com account to an email program using POP, use the Windows Live Hotmail POP3 server settings.
The Outlook.com POP server settings for downloading new incoming messages to email program, cell phone or mobile device are:
• Outlook.com POP server address: pop3.live.com
• Outlook.com POP user name: Your full Outlook.com email address (not an alias)
• Outlook.com POP password: Your Outlook.com password
• Outlook.com POP port: 995
• Outlook.com POP TLS/SSL encryption required: yes
Regards,
Rave -
No Connectivity on line - rebooting Westell 7500 does not help
Hi All,
We've been having sync issues for well over 2 weeks now. Sometimes hard rebooting the Westell 7500 (Model:A90-750015-07 - firmware ver: 5.01.00.02) will allow the line to stay up for a day or so.
But since yesterday, nothing has helped. The line will come up and stay up for maybe 5-10minutes and then drop again.
Calling the VZ support line is very frustrating since the "robot" menus do not help to get us to actual support personnel. The one time we got past the automated system, the lady said we had reached the wrong dept. and dropped us back to the robot
I am working from home, so all of this is total time and monely loss. Currently a different internet connection helped to manage post this.
Anyway, here are some "all event" logs we could collect today - (we are in an apartment and do not have access to any NID).
cwmpd[338]: CWMP: Final Http Return Code = 204
syslog: WebServer: Page [/htmlV/wacpHidden.asp] Access by user administrator from IP 192.168.15.253
cwmpd[338]: CWMP: Inform (200). The following events are true:1 BOOT,4 VALUE CHANGE
cwmpd[338]: CWMP: SSL Status = SSL Connection Succeeded,TCP Status = TCP Connected,Authentication Type = Basic
cwmpd[338]: CWMP: Inform Sent Successfully
daemon.err cwmpd[368]: cwmpDDNSCallback: Result of DDNS Update (ipupdate_once) ->3
syslog: WebServer: Page [/htmlV/sys_system_log.asp] Access by user administrator from IP 192.168.15.253
syslog: WebServer: Page [/goform/EventForm] Access by user administrator from IP 192.168.15.253
syslog: WebServer: Page [/htmlV/sys_system_log.asp] Access by user administrator from IP 192.168.15.253
Apr 11 09:18:58 daemon.notice pppd[1838]: Westell PPP Environment:device:nas1 linkname:config0 iplocal:74.102.130.79 ipremote:10.5.59.1 ppplogname:root orig_uid:0 connect_time:355824129 bytes_sent:287346 bytes_rcvd:544123 usepeerdns:1 dns1:71.250.0.12 dns2:71.242.0.12
Apr 11 09:18:58 daemon.warn pppd[1838]: pppd[1838] EXIT_PPPOE_TIMEOUT_PADO caused InternetFail light to be lit
Apr 11 09:18:58 daemon.notice pppd[1838]: PPPD Exit Status changed EXIT_OK->EXIT_PPPOE_TIMEOUT_PADO during phase PHASE_SERIALCONN->PHASE_HOLDOFF
Apr 11 09:18:58 daemon.notice pppd[1838]: Westell phase_hook PHASE=PHASE_HOLDOFF(11)
Apr 11 09:18:58 daemon.notice pppd[1838]: Westell Random Holdoff returning 445 seconds
Apr 11 09:18:58 daemon.warn pppd[1838]: Leaving destroy_pppoesessionfile
Apr 11 09:18:58 daemon.err pppd[1838]: Unlinking PPPoE session file:/WFIO/ppp-config0
Apr 11 09:18:58 daemon.warn pppd[1838]: Enter destroy_pppoesessionfile
Apr 11 09:18:58 daemon.err pppd[1838]: Unable to complete PPPoE Discovery
Apr 11 09:18:58 daemon.warn pppd[1838]: Timeout waiting for PADO packets
Apr 11 09:18:58 daemon.warn pppd[1838]: waitForPADO: timed out
Apr 11 09:18:48 daemon.warn pppd[1838]: waitForPADO: timed out
Apr 11 09:18:43 daemon.warn pppd[1838]: waitForPADO: timed out
Apr 11 09:18:38 daemon.notice pppd[1838]: Westell PPP Environment:device:nas1 linkname:config0 iplocal:74.102.130.79 ipremote:10.5.59.1 ppplogname:root orig_uid:0 connect_time:355824129 bytes_sent:287346 bytes_rcvd:544123 usepeerdns:1 dns1:71.250.0.12 dns2:71.242.0.12
Apr 11 09:18:38 daemon.notice pppd[1838]: PPPD Exit Status changed EXIT_PPPOE_TIMEOUT_PADO->EXIT_OK during phase PHASE_DORMANT->PHASE_SERIALCONN
Apr 11 09:18:38 daemon.notice pppd[1838]: Westell phase_hook PHASE=PHASE_SERIALCONN(2)
Apr 11 09:18:38 daemon.notice pppd[1838]: Wan link is up and PPPoE Terminator on DSL:nas1 is done working
Apr 11 09:18:38 daemon.notice pppd[1838]: Westell PPP Environment:device:nas1 linkname:config0 iplocal:74.102.130.79 ipremote:10.5.59.1 ppplogname:root orig_uid:0 connect_time:355824129 bytes_sent:287346 bytes_rcvd:544123 usepeerdns:1 dns1:71.250.0.12 dns2:71.242.0.12
Apr 11 09:18:38 daemon.notice pppd[1838]: Westell phase_hook PHASE=PHASE_DORMANT(3)
Apr 11 09:14:15 daemon.notice pppd[1838]: Westell PPP Environment:device:nas1 linkname:config0 iplocal:74.102.130.79 ipremote:10.5.59.1 ppplogname:root orig_uid:0 connect_time:355824129 bytes_sent:287346 bytes_rcvd:544123 usepeerdns:1 dns1:71.250.0.12 dns2:71.242.0.12
Apr 11 09:14:15 daemon.warn pppd[1838]: pppd[1838] EXIT_PPPOE_TIMEOUT_PADO caused InternetFail light to be lit
Apr 11 09:14:15 daemon.notice pppd[1838]: PPPD Exit Status changed EXIT_OK->EXIT_PPPOE_TIMEOUT_PADO during phase PHASE_SERIALCONN->PHASE_HOLDOFF
daemon.notice pppd[1838]: Westell phase_hook PHASE=PHASE_HOLDOFF(11)
daemon.notice pppd[1838]: Westell Random Holdoff returning 263 seconds
daemon.warn pppd[1838]: Leaving destroy_pppoesessionfile
daemon.err pppd[1838]: Unlinking PPPoE session file:/WFIO/ppp-config0
daemon.warn pppd[1838]: Enter destroy_pppoesessionfile
daemon.err pppd[1838]: Unable to complete PPPoE Discovery
daemon.warn pppd[1838]: Timeout waiting for PADO packets
Apr 11 09:14:15 daemon.warn pppd[1838]: waitForPADO: timed out
Apr 11 09:14:05 daemon.warn pppd[1838]: waitForPADO: timed out
Apr 11 09:14:00 daemon.warn pppd[1838]: waitForPADO: timed out
Apr 11 09:13:55 daemon.notice pppd[1838]: Westell PPP Environment:device:nas1 linkname:config0 iplocal:74.102.130.79 ipremote:10.5.59.1 ppplogname:root orig_uid:0 connect_time:355824129 bytes_sent:287346 bytes_rcvd:544123 usepeerdns:1 dns1:71.250.0.12 dns2:71.242.0.12
Apr 11 09:13:55 daemon.notice pppd[1838]: PPPD Exit Status changed EXIT_PPPOE_TIMEOUT_PADO->EXIT_OK during phase PHASE_DORMANT->PHASE_SERIALCONN
Apr 11 09:13:55 daemon.notice pppd[1838]: Westell phase_hook PHASE=PHASE_SERIALCONN(2)
Apr 11 09:13:55 daemon.notice pppd[1838]: Wan link is up and PPPoE Terminator on DSL:nas1 is done working
Apr 11 09:13:55 daemon.notice pppd[1838]: Westell PPP Environment:device:nas1 linkname:config0 iplocal:74.102.130.79 ipremote:10.5.59.1 ppplogname:root orig_uid:0 connect_time:355824129 bytes_sent:287346 bytes_rcvd:544123 usepeerdns:1 dns1:71.250.0.12 dns2:71.242.0.12
Apr 11 09:13:55 daemon.notice pppd[1838]: Westell phase_hook PHASE=PHASE_DORMANT(3)
Apr 11 09:05:55 daemon.notice pppd[1838]: Westell PPP Environment:device:nas1 linkname:config0 iplocal:74.102.130.79 ipremote:10.5.59.1 ppplogname:root orig_uid:0 connect_time:355824129 bytes_sent:287346 bytes_rcvd:544123 usepeerdns:1 dns1:71.250.0.12 dns2:71.242.0.12
Apr 11 09:05:55 daemon.warn pppd[1838]: pppd[1838] EXIT_PPPOE_TIMEOUT_PADO caused InternetFail light to be lit
Apr 11 09:05:55 daemon.notice pppd[1838]: PPPD Exit Status changed EXIT_OK->EXIT_PPPOE_TIMEOUT_PADO during phase PHASE_SERIALCONN->PHASE_HOLDOFF
Apr 11 09:05:55 daemon.notice pppd[1838]: Westell phase_hook PHASE=PHASE_HOLDOFF(11)
Apr 11 09:05:55 daemon.notice pppd[1838]: Westell Random Holdoff returning 480 seconds
Apr 11 09:05:55 daemon.warn pppd[1838]: Leaving destroy_pppoesessionfile
Apr 11 09:05:55 daemon.err pppd[1838]: Unlinking PPPoE session file:/WFIO/ppp-config0
Apr 11 09:05:55 daemon.warn pppd[1838]: Enter destroy_pppoesessionfile
Apr 11 09:05:55 daemon.err pppd[1838]: Unable to complete PPPoE Discovery
Apr 11 09:05:55 daemon.warn pppd[1838]: Timeout waiting for PADO packets
Apr 11 09:05:55 daemon.warn pppd[1838]: waitForPADO: timed out
Apr 11 09:05:45 daemon.warn pppd[1838]: waitForPADO: timed out
Apr 11 09:05:40 daemon.warn pppd[1838]: waitForPADO: timed out
Apr 11 09:05:35 daemon.notice pppd[1838]: Westell PPP Environment:device:nas1 linkname:config0 iplocal:74.102.130.79 ipremote:10.5.59.1 ppplogname:root orig_uid:0 connect_time:355824129 bytes_sent:287346 bytes_rcvd:544123 usepeerdns:1 dns1:71.250.0.12 dns2:71.242.0.12
Apr 11 09:05:35 daemon.notice pppd[1838]: PPPD Exit Status changed EXIT_PEER_DEAD->EXIT_OK during phase PHASE_DORMANT->PHASE_SERIALCONN
Apr 11 09:05:35 daemon.notice pppd[1838]: Westell phase_hook PHASE=PHASE_SERIALCONN(2)
Apr 11 09:05:35 daemon.notice pppd[1838]: Wan link is up and PPPoE Terminator on DSL:nas1 is done working
Apr 11 09:05:35 daemon.notice pppd[1838]: Westell PPP Environment:device:nas1 linkname:config0 iplocal:74.102.130.79 ipremote:10.5.59.1 ppplogname:root orig_uid:0 connect_time:355824129 bytes_sent:287346 bytes_rcvd:544123 usepeerdns:1 dns1:71.250.0.12 dns2:71.242.0.12
Apr 11 09:05:35 daemon.notice pppd[1838]: Westell phase_hook PHASE=PHASE_DORMANT(3)
Apr 11 09:04:09 daemon.err cwmpd[367]: ddnsWanIPCallback WAN State Down
Apr 11 09:04:07 daemon.notice net_mgr[357]: Routes transitioning to Down state on ppp0.
Apr 11 09:04:07 daemon.notice net_mgr[357]: QoS on ppp0 transitioning to Down state.
Apr 11 09:04:04 daemon.notice pppd[1838]: Westell PPP Environment:device:nas1 linkname:config0 iplocal:74.102.130.79 ipremote:10.5.59.1 ppplogname:root orig_uid:0 connect_time:355824129 bytes_sent:287346 bytes_rcvd:544123 usepeerdns:1 dns1:71.250.0.12 dns2:71.242.0.12
Apr 11 09:04:04 daemon.notice pppd[1838]: Westell phase_hook PHASE=PHASE_HOLDOFF(11)
Apr 11 09:04:04 daemon.notice pppd[1838]: Westell Random Holdoff returning 91 seconds
Apr 11 09:04:04 daemon.warn pppd[1838]: Leaving destroy_pppoesessionfile
Apr 11 09:04:04 daemon.err pppd[1838]: Unlinking PPPoE session file:/WFIO/ppp-config0
Apr 11 09:04:04 daemon.warn pppd[1838]: Enter destroy_pppoesessionfile
Apr 11 09:04:04 daemon.notice pppd[1838]: Westell PPP Environment:device:nas1 linkname:config0 iplocal:74.102.130.79 ipremote:10.5.59.1 ppplogname:root orig_uid:0 connect_time:355824129 bytes_sent:287346 bytes_rcvd:544123 usepeerdns:1 dns1:71.250.0.12 dns2:71.242.0.12
Apr 11 09:04:04 daemon.notice pppd[1838]: Westell phase_hook PHASE=PHASE_DISCONNECT(10)
Apr 11 09:04:04 daemon.info pppd[1838]: Sent 287346 bytes,received 544123 bytes.
Apr 11 09:04:04 daemon.info pppd[1838]: Connect time 5930402.2 minutes.
Apr 11 09:04:04 daemon.notice pppd[1838]: Connection terminated.
Apr 11 09:04:04 daemon.notice pppd[1838]: Westell PPP Environment:device:nas1 ifnamepp0 linkname:config0 iplocal:74.102.130.79 ipremote:10.5.59.1 ppplogname:root orig_uid:0 connect_time:355824129 bytes_sent:287346 bytes_rcvd:544123 usepeerdns:1 dns1:71.250.0.12 dns2:71.242.0.12
Apr 11 09:04:04 daemon.warn pppd[1838]: pppd[1838] EXIT_PEER_DEAD caused InternetFail light to be lit
Apr 11 09:04:04 daemon.notice pppd[1838]: PPPD Exit Status changed EXIT_OK->EXIT_PEER_DEAD during phase PHASE_ESTABLISH->PHASE_DEAD
Apr 11 09:04:04 daemon.notice pppd[1838]: Westell phase_hook PHASE=PHASE_DEAD(0)
Apr 11 09:04:04 daemon.info dnsmasq[311]: using nameserver 71.250.0.12#53
Apr 11 09:04:04 daemon.info dnsmasq[311]: using nameserver 71.242.0.12#53
Apr 11 09:04:04 daemon.info dnsmasq[311]: reading /var/etc/resolv.conf
Apr 11 09:04:04 daemon.notice ip-down[2062]: ppp0: 287346 bytes sent,544123 bytes received
Apr 11 09:04:04 daemon.notice ip-down[2062]: ppp0: disconnected;connected for 355824129 seconds
Apr 11 09:04:04 daemon.warn pppd[1838]: Couldn t increase MRU to 1500
Apr 11 09:04:04 daemon.warn pppd[1838]: Couldn t increase MTU to 1500
Apr 11 09:04:04 daemon.notice pppd[1838]: Westell PPP Environment:device:nas1 ifnamepp0 linkname:config0 iplocal:74.102.130.79 ipremote:10.5.59.1 ppplogname:root orig_uid:0 connect_time:355824129 bytes_sent:287346 bytes_rcvd:544123 usepeerdns:1 dns1:71.250.0.12 dns2:71.242.0.12
Apr 11 09:04:04 daemon.notice pppd[1838]: Westell phase_hook PHASE=PHASE_ESTABLISH(4)
Apr 11 09:04:04 daemon.notice pppd[1838]: Westell PPP Environment:device:nas1 ifnamepp0 linkname:config0 iplocal:74.102.130.79 ipremote:10.5.59.1 ppplogname:root orig_uid:0 connect_time:355824129 bytes_sent:287346 bytes_rcvd:544123 usepeerdns:1 dns1:71.250.0.12 dns2:71.242.0.12
Apr 11 09:04:04 daemon.notice pppd[1838]: Westell phase_hook PHASE=PHASE_NETWORK(7)
Apr 11 09:04:04 daemon.notice pppd[1838]: Westell PPP Environment:device:nas1 ifnamepp0 linkname:config0 iplocal:74.102.130.79 ipremote:10.5.59.1 ppplogname:root orig_uid:0 connect_time:355824129 bytes_sent:287346 bytes_rcvd:544123 usepeerdns:1 dns1:71.250.0.12 dns2:71.242.0.12
Apr 11 09:04:04 daemon.notice pppd[1838]: Westell ip_down()
Apr 11 09:04:04 daemon.notice pppd[1838]: Westell PPP Environment:device:nas1 ifnamepp0 linkname:config0 iplocal:74.102.130.79 ipremote:10.5.59.1 ppplogname:root orig_uid:0 usepeerdns:1 dns1:71.250.0.12 dns2:71.242.0.12
Apr 11 09:04:04 daemon.notice pppd[1838]: Westell phase_hook PHASE=PHASE_TERMINATE(9)
Apr 11 09:04:04 daemon.notice pppd[1838]: Serial link appears to be disconnected.
Apr 11 09:04:04 daemon.info pppd[1838]: No response to 6 echo-requests
Apr 11 08:49:27 daemon.info cwmpd[338]: CWMP: Final Http Return Code = 204
Apr 11 08:49:27 daemon.info cwmpd[338]: CWMP: Inform (200). The following events are true:1 BOOT,4 VALUE CHANGE
Please help!!
TIAI have sent you a private message regarding your issue.
Anthony_VZ
**If someones post has helped you, please acknowledge their assistance by clicking the red thumbs up button to give them Kudos. If you are the original poster and any response gave you your answer, please mark the post that had the answer as the solution**
Notice: Content posted by Verizon employees is meant to be informational and does not supersede or change the Verizon Forums User Guidelines or Terms or Service, or your Customer Agreement Terms and Conditions or plan -
Legality of master line socket
Hi, When we moved into our rented accomodation the telephone access point in the lounge did not work. I searched the house for a master socket but couldn't find one.
So I called the rental agency, and they sent one of their employees out who did some adhoc messing about (there were two access points in the lounge) and he cut some wires and bodged a connection together from a combination of both sockets.
Our BB connection has always synched much lower than it should, which I have always put down to dodgy internal wiring & not being able to find the master socket hasn't helped.
Now a friend has identifed that the access point in the lounge is actually a very ancient master socket. I have read that it is against the law to touch or modify the master socket which is BTs property.
However as I work from home I would really like to get the speed sorted out and have a decent master socket fitted.
So I have several questions,
1) If we get an engineer out, are there any legal ramifications of the socket being modified (I can happily point them to the man who did it - but he does own the rental agency we rent the house from, so it could jeopordise our accomodation)
2) Who would be liable for the bill to repair / replace the master socket?
I would love to get some advice from an actual BT rep if possible please?
EDIT: Does anyone from BT read or respond on these forums?Devon_Dave wrote:
hamish72 wrote:
I think some master sockets have terminals for the user to attach extension wiring so that would be legal whilst any work up to that point would not and your old socket probably has not got that feature
Master sockets do not have a customer connection point, only line boxes (NTE5) do
Several misconceptions creeping in here.
1 An NTE5 is a master socket. It does have customer-accessible terminals. How else do you think extension wiring would be attached ?
2 Very old sockets are identifiable by having no split in the faceplate. They date from the days when BT provided and owned all the wiring, and there was no need to have a demarcation point between BT and the customer's network. If that is what exists, it should be replaced at no cost by BT Openreach during any fault tracing work. If you just want it replaced, you will be charged (lots !).
3 Any work undertaken by BT to sort out bodged customer wiring will be charged. The person who will be charged is the current owner of the telephone line account - regardless of who actually did the deed. There's no question of prosecution these days (if there ever was).
4 It's perfectly possible for bodged wiring to screw up DSL sync speeds, without necessarily introducing noise interference. If the wiring has been "Tee'd" in to circuit (that is - forming a sort of "Y" with one input and two outputs), it can cause a large "Impedance discontinuity". This will ruin the "Frequency response" of the line and this will cause lowered sync rates. (This is a common problem in customers' wiring, but some electricians and telecom technicians aren't aware of this).
Getting this fixed is up to the person who pays the line rental. It's quite clear that someone has badly bodged the wiring, and it needs a professional (that is - a BT technician) to sort it out. This has to be paid for. The OP made a fair point about not upsetting the landlord - but it's the landlord who has been let down by a cowboy handyman. -
Systemd: Socket service syslog.service not loaded, refusing [SOLVED]
I have installed systemd as mentioned in the wiki alongwith initscripts and I use "init=/bin/systemd" in kernel line to start it.
I am getting this systemd error "Socket service syslog.service not loaded, refusing" at boottime. This is the only error that comes. I have tried to check the wiki and google and found following links:
https://bbs.archlinux.org/viewtopic.php?id=147640
http://www.spinics.net/lists/hotplug/msg05295.html
There is apparently a solution to this:
http://www.spinics.net/lists/hotplug/msg05296.html
But it is too technical for me to understand and implement; and it is not for Arch linux. Please help.
Last edited by rnarch (2012-10-25 16:46:46)I have syslog-ng in the DAEMONS line of rc.conf file. I mentioned that I see this error at time of booting only. The systemctl status outputs are as follows:
$ systemctl status syslog.service
syslog.service
Loaded: error (Reason: No such file or directory)
Active: inactive (dead)
$ systemctl status syslog-ng.service
syslog-ng.service - System Logger Daemon
Loaded: loaded (/usr/lib/systemd/system/syslog-ng.service; disabled)
Active: active (running) since Wed, 24 Oct 2012 19:09:18 +0000; 1h 54min ago
Docs: man:syslog-ng(8)
Main PID: 294 (syslog-ng)
CGroup: name=systemd:/system/syslog-ng.service
└ 294 /usr/sbin/syslog-ng -F
What further information should I provide. -
Error in ABUMN: Line Item Schema SAP_RET_XX0 is not defined
Hello Guru,
I have one problem when doing asset transfer (ABUMN) within same company code, because we want to drop some of depreciation areas. And in the new asset those depreciation areas are not existing. When I was trying to run ABUMN and simulate, the error came. Message no AC598 "Line Item Schema SAP_RET_XX0 is not defined". I tried to look in OSS Note, I found that error but the solution is for 4.0 while we are using 4.7 already but still the error is happening.
Please share whether you ever faces the error like this before.
Thanks in advance.
Kind regards,
DodiHi,
Please refer to Note 703302 - Error AC 598 SAP_RET_RU0 is missing if it helps.
Summary
Symptom
Message AC 598 "Line item schemes are not found." is issued when trying to create assets postings with activity types 230, 300.
Other terms
SAP_RET_RU0 SAP_RET_RU1
Reason and Prerequisites
Line items schemes SAP_RET_RU1, SAP_RET_RU0 are incorrect. This is an error in the standard delivery for Russia.
Solution
Delete two records in the table T093H using transaction SE16 with the following data: LAND1 GLAFABER BWASL BUZSM
RU * 230 SAP_RET_RU1
RU * 300 SAP_RET_RU0
Header Data
Release Status: Released for Customer
Released on: 03.02.2004 14:58:55
Priority: Recommendations/additional info
Category: Customizing
Primary Component: XX-CSC-RU-FI Financial Accounting
Secondary Components: XX-CSC-RU Russia
Releases
Release Independant -
I dropped my computer. Boot Device not found?
I dropped my computer and for some reason when i power it up, it goes straight to a black screen and says "Boot Device Not Found, Please install an operating system on your hard disk. Hard Disk (3F0), f2 System Diagnostics, For more information, please visit: www.hp.com/go/techcenter/startup" I have no clue what to do to fix this. Thanks in advance.
diazlourdes wrote:
I dropped my computer and for some reason when i power it up, it goes straight to a black screen and says "Boot Device Not Found, Please install an operating system on your hard disk. Hard Disk (3F0), f2 System Diagnostics, For more information, please visit: www.hp.com/go/techcenter/startup" I have no clue what to do to fix this. Thanks in advance.
My Pavilion dv7-3165dx recently had a total HDD failure, first I tried to order an OEM replacement HDD from the HP parts sales phone line, but they only offered a smaller HDD as their listed replacement for my laptop. I finally got them to inform me that the tech support line might be able to sell me the OEM HDD. On calling the tech support line I was able to order the correct HDD, and it came with a set of recovery DVDs to install Win 7, and the other OEM partitions on my new HDD. This being the case if your HDD has failed you may want to call the tech support line to find out if they have an OEM HDD, and the recovery DVDs to go with your machine.
IF what I post solves your problem please click the "Problem solved" button on my post.
Oh, and if I have helped you, clicking the 'Kudos' star on my post would not hurt my feelings ether. -
What is this message: Base Line Date for rule 11 not set ?
Hello all,
I am doing some test.
Cenario:
I need to create a Scheduling Agreement in transaction: VA41
The material I am using to create the VA41, I have just created.
I created in MM01 the views: Basic Datas 1 and 2, Sales View 1,2 and 3 and Account View 1.
Issue:
When I am creating the VA41 and I enter the material, the system shows the messages:
1) Dates from:: Base line date for rule 11 not set
2) Dates from:: Base line date for rule 9 not set
*obs: the messages dos not block the creation of VA41. It is a information message.
Question:
What that means? What will happen if I do not fix that? What should I do in order to not have more these messages?
Tks & Rgds,
Barbara
Message was edited by:
Barbara BarbosHi
Please check whether you have assigned - payment terms both at company code and sales area level
VVR -
I can't print wirelessly using Airport Express. I have my HP printer connected to a USB hub, and the hub to the Airport Express, but when I select the HP from the printer list, my MacBook says the printer is "off-line" - even when it is not. I've tried several USB connectors, and several different ports on my USB hub; same result. I need to have the HP connected to the hub 'cause from there it's connected to our desktop Mac.
Hi,
I am currently replying to this as it shows in the iChat Community.
I have asked the Hosts to move it to Snow Leopard (you should not lose contact with it through any email links you get)
I also don't do Wirelss printing so I can't actaully help either.
10:01 PM Friday; July 29, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb( 10.6.8)
Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images." No, Seriously -
My iphone is not working, i was planning on getting the iphone 5s for christmas, but i do not have my phone backed up on itunes. On my screen are these blue lines across on my screen, and i cant see anthing and i do not know what to do. I want to back up my phone but i cant see my screen to back it up. I need help badly. Thanks apple hope you can help me in this matter.
You wouldn't need to see the screen to backup unless you have a passcode on the device. Is that the case? You should be able to plug the device into the computer with iTunes and just select backup now.
-
I'm using Firefox 6 with all current updates. This is on a desktop pc running Windows XP (Service Pack 3).
At some previous time I was able to pin tabs - I pinned three. Lately I do not have a drop-down menu when right clicking on a pinned or unpinned tab. The feature is just not there.Try the Firefox SafeMode. <br />
''A troubleshooting mode, which disables most Add-ons.'' <br />
''(If you're not using it, switch to the Default Theme.)''
# You can open the Firefox 4/5/6/7 SafeMode by holding the '''Shft''' key when you use the Firefox desktop or Start menu shortcut.
# Or use the Help menu item, click on '''Restart with Add-ons Disabled...''' while Firefox is running. <br />
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shft key) to open it again.''
If it is good in the Firefox SafeMode, your problem is probably caused by an extension, and you need to figure out which one. <br />
http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes
Maybe you are looking for
-
Eye icon not displaying in AccordionPanelTab
This problem is across sites. One of them is http://www.alvingolf.com/documents.html. Strangely, on that site, there is also an accordion where I cannot directly edit in design view, but must edit in the code. That page is http://www.alvingolf.com/ba
-
Reading attachment: diposition NULL
Hi, I am trying to read attachment using javamail but when I use getDisposition function, I always get NULL disposition value,even for attachment.Please help me.This is the code I am using. import java.io.*; import javax.swing.*; import java.util.*;
-
It is called Object Drawing Mode and can be turned off easily by clicking the ODM sub-selection button when the line tool is selected. Chris Georgenes Adobe Community Expert mudbubble.com keyframer.com howtocheatinflash.com plecoguy wrote: > Everytim
-
Archive pricing condition record
Hello everybody, I want to ask about how to archive MM pricing condition record? I tried with SARA, archive object CND_RECORD or program /SAPCND/CND_RECORD_WRITE but it doesnt work. Kindly advise, Thanks, HN
-
Music On Ipod lost after latest Itunes Update...
I just updated to the new Itunes software, and after plugging in my Ipod Touch to add some new content to my playlist that I had just purchased from the Itunes store. Itunes froze up and would not respond. When I finally got it running again, all the