BT Freestyle 750 cordless phone with answer machin...

Hi
Can anyone help. The keypad on the phone is locked and I'm therefore not able to make calls with the phone. Can only receive calls. Don't know how the keypad got locked. Any help would be appreciated.

Er, you could try reading the user guide?
if you have lost it download another one.
I found one on the BT site where it says press and hold the hash key # to lock/unlock.
http://www.shop.bt.com/products/bt-freestyle-750-twin-cordless-phone-with-answer-machine--grey--56XM...
You must have pressed the # key for a few seconds.
Regards
El enfadado (the angry one)

Similar Messages

BT3920 Quad Phones with Answering Machine from Tes...

Hi, Have bought BT3920 Quad Phones with Answering Machine from Tesco which only has a short User Guide. Tried to get fuller guide on-line AND tried ringing all the BT Helpline numbers I can find, but to no avail. It seems BT know nothing about the BT3920 and it looks like it was made specially for Tesco. My problem is that I need to find out how to access the answering machine remotely and with no User Guide have found it impossible. Have tried numerous methods but no luck. Anyone got one of these phone sets who can advise please?

I have now worked out how to pick up messages remotely, but could still do with the full User Guide! If anyone else gets these phones you have to go into Menu, scroll through Anwerphone selections and select "Ans settings", then select "remote access" and select "On" (it must come out of the factory switched onto "Off"). The default factory setting for picking up the messages remotely is by entering "*0000" on the keypad of the phone you are ringing from, but wait until answer message starts first. Hope this helps someone else in need!!!

BT Freestyle 750 cordless phone

I have entered the correct date and time on my phone, purchased one month ago, but the automated message on the answering machine states the wrong day. i.e, if I receive a message on Sunday, the answering machine says it was received on Friday, although the time is correct. How can I remedy this?

I assume you have read the manual, but did you see the below?
Date and time
Providing you have subscribed to your
network’s Caller Display service, the
date and time is set automatically for
all handsets when you receive your
first call.
The date and time is recorded with
each answering machine message
you receive.
If you do not have a Caller Display
service you can set the date and time
manually.
Ray.

Bt synergy 5500 trio phone with answer machine

hi ,can anyone tell me why our phone shows missed call even though we answer it when it rings and why when we clear the message on one handset we have to clear it on the other handsets as well . thanks

Hi Sammy,
Thanks for posting. How long have you had the phones? Have you checked the batteries? They may need recharging or changing. Check the user guide at this link for information.
http://www.shop.bt.com/content/uni2/documentation/5fjg/full_user_guide.pdf
Let me know how you get on.
Cheers
David
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)

Broadband interference with Answer Machine

I have recently installed the Home Hub 2. I also have a BT Freestyle 2500 with a base station and 2 satellite handsets. The Freestyle includes an Answerphone (Ansafone if you're searching later!)
The handsets are clear still.
It's only when the answering machine kicks in does the white noise interference start, it can be heard while recording and on playback.
I have exchanged ADSL filters and its still the same. It stops if I power down the Hub.
Any ideas?
Solved!
Go to Solution.

You can still add an extra filter, if you have one.
Plugging it into the hub would use Broadband Talk, if you have the service. Otherwise it defaults to your landline number.
There is quite a bit of extra filtering on that connection, so that may help.
Remember to set up the home hub telephone setting page correctly, otherwise you will not get any incoming calls.
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

Problem with answering machines and PSTN voice mails

Hi,
We are experiencing issues when we place a call to the PSTN and it is redirected to a answering machine, for example if I place a call to my cell phone and it is powered off normally it will be answered by the voice mail of my celular company, but in this case whe have two strange behaviors:
1.- the call keeps ringing like my cell phone were available.
2.- the call is connected but we are experiencing something like one way audio, we cannot hear audio from the voicemail, but checking my voice mail on my cell phone I realized that I am able to leave a message.
This two issues occours randomly and for both home answering machines and cell phones voicemails, with regular calls we have no problems.
we have:
     CUCM 9.1
     GW 3900 - 15.1 (4) M7
The GW is connected with the CUCM via SIP, and with the PSTN with E1 R2.
Here is part of the configuration that I think could be relevant:
voice call convert-discpi-to-prog
voice service voip
no ip address trusted authenticate
allow-connections sip to sip
signaling forward unconditional
sip
bind control source-interface Loopback0
bind media source-interface Loopback0
rel1xx disable
min-se 360 session-expires 360
header-passing
voice rtp send-recv
controller E1 3/1
framing NO-CRC4
line-termination 75-ohm
ds0-group 0 timeslots 1-15,17-31 type r2-digital r2-compelled ani
cas-custom 0
   country telmex
   release-guard-time 2
   disconnect-tone
   category 2
   answer-signal group-b 1
   ani-digits min 4 max 20
   answer-guard-time 500
   timer interdigit incoming 1000
   groupa-callerid-end
   dtmf timer inter-digit 250
description E1 para PSTN
voice-port 3/1:0
cptone MX
dial-peer voice 401 pots
description ** LLAMADAS A CELULAR LOCAL y LD**
preference 1
destination-pattern 9044..........
port 3/1:0
forward-digits 13
no register e164

Hi Cesar,
I've reviewed "debug voice ccapi inout" and "show call history voice", but I found anything, I attached both files.
Best Regards!

Can I use my PB as a phone and answer machine?

Hi.
I use Palm desktop as my diary and it seems to have the ability to dial phone numbers. Could I use my bluetooth headset the same way as I use it in Skype, only to talk on my landline? Is there any software that will act as an answering machine if someone dials into the computer?
Regards,Nick.
1 gig TiBook, quad G5, Mac Mini. Mac OS X (10.4.5)

OS 7.5 used to include this as standard - I don't know when it was dropped.
MacUpdate has a couple of solutions.
HTH
mrtotes

Bt Verve 450 Trouble with Answer machine

Hi,
I got a problem with my bt verve 450, i can make and receive calls ok,but when i turn on the answer machine,i cant record a outgoing message,it just comes up with not possibe on the handset,and when i have the answer machine turned on and i receive a call,the base station comes up with P2,any help would be very appreciated
With kind thanks
Solved!
Go to Solution.

I was unable to set my outgoing message. The handset would show empty battery and then switch off for about 10 seconds! This occurred on all handsets, with full, new battery and even if plugged into a charger!
I reset the base - no change (see above for instructions)
I reset the handset - success!
Handset reset
This resets your BT Verve 450 handset - Addresses are retained
1. Press Menu, scroll to Settings and press OK.
2. Scroll to H/set settings. Press OK.
3. Scroll to Handset reset. Press OK.
4. At "Reset to default" Select yes.
5. If you select "Yes", the handset displays "Please wait" followed by a tick, it then exits the menu mode. If you press
No, it returns to the previous menu level
(If I have helped you in any way to say "Thank You" please click on the star next to the message. Thank You)
If I have solved your Issue please click the "Mark as accepted solution" button.

Studio 4500 triple with answer machine

When entering contacts to one of the the handsets does this have to be repeated on all other handsets or can this be done automatically.if so,how.All handsets are registered.
Cheers

Sorry Mg1,
I think the Studio 4500 stores it phone directory on the handsets and not the base station, as such you can only add and delete the number on each handset (one at a time).
Hope you dont have too many numbers to save, as it can take a while ;-(

Freelance XD5500 Answer machine

I have XD550 Twin phone with answer machine - The answer machine has now started playing message on its own Saying Answer off / Answer on and only way to solve this is by switching machine off

Hi Arandkrr,
I'm sorry to read about the problems with your answering machine check out this link BT Freelance XD8500 for info on how to get help with this.
Thanks
Neil
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

Having huge problems with TONE on freestyle 750, c...

We recently bought a new Freestyle 750 phone and answer machine, and while in other respects the phone is fine, we find that voices are very distorted, to the extent that we cant really recognise people well, including my family.
This is really pretty embarassing, so we are hoping to find a way of adjusting the TONE to be less wooly, tinny and bassifying. Volume doesnt help (it probably makes it worse), anybody got any good ideas as this is really hard to tolerate.
Or possibly there are other issues preventing it from being clear?

Unplug your router and plug the phone directly into the phone socket. Make a call. Does it now sound ok?
If so the microfilter could be the cause. A different brand of filter can cure this (If it sounds ok when trying the above).
-+-No longer a forum member-+-

Can send but can't receive faxes on HP Laserjet, on Mac 10.9 Mavericks with TAM answering machine

I have an iMac running OS 10.9 (Mavericks) and an HP Laserjet Professional M1212nf MFP all-in-one print/scan/fax machine connected by USB. I have a telephone system with answering machine connected.
I can send out faxes from the HP and from the Mac (using Fax pdf). What I can't do is receive faxes on the HP (I know that the Mac cannot receive faxes with this machine). I've tried every combination of settings to no avail even disconnecting the phone/answering machine to no avail.
Any ideas what settings I need?
This question was solved.
View Solution.

Hi ChuckStewart,
This is certainly a head scratcher! I have found some additional information, from the following link Using an HP Fax Product with a Telephone Answering Machine (TAM).
I found this blurb interesting, When recording the outgoing message on your TAM, the voice portion should be at least 10 seconds long, but no longer than 20 seconds . Record 5 to 7 seconds of silence at the end of the voice portion of your outgoing message (total outgoing message length would be your voice message plus the additional 5 to 7 seconds of recorded silence ).
I wonder if you might find something helpful in the document.
Please let me know. thanks.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Bug in LP: smart call/answering machine 1.28

Bug in smart call/ answering machine in Lp 1.28
Smart call have 2 bugs and one suggestion.
1. Sometimes smart call isnt work. After restart phone its works again. I test in some devices and all of them have this bug.
2. While talking phone if someone is waiting on another call, after seprate phone from ear and see who is on another call. So after bring device to ear call accepted and old call end. This is so annoying.
3. Seprate smart call options. I dont want answer my phone with bring device to ear but i need to reject and mute mode.. Plz
And about answering machine.
In lollipop answering machine have some problems.. For example sometimes i am taking with phone and answering machine starts automatically and call ended. Or sometimes calls dont go to answering machine.
Some ui bugs:
3 dot icon is bigger in phone/contacts app vs other stock apps
Small apps page isnt material yet
Sorry for my bad english..my phone is z2 23,1.a.1.28

Contact Sony Xperia Support with your bug report .
http://support.sonymobile.com/global-en/contactUs/

Can I get a adaptor to my standard cordless phone ...

Can I get a adaptor to my standard cordless phone with out a computer turned on

I utilize a FreeTalk Connect Me (www.freetalkconnect.com/me/) to perform that task without a computer. Some people claim this type of configuration produces bad audio quality. I haven't had any major issues with my configuration. To me the quality has been on par with that of a standard phone line.

Skype ready cordless phone purchase

i recently bought the skype ready cordless phone with plan for $104+, since then i have not received any confirmation email or anything of the sort saying when i will get my phone.
Does anyone know how long this takes for shipment and is it normal not to get a confirmation email.

doc11583 wrote:
so to confirm I will have to contact General Electric (GE) because i bought the GE Digital Cordless Expandable Telephone. ???
Yes, there is a "contact us" for GE on this page: http://www.gephones.com/support/FAQ/
About Me You can also use a IP Camera as your camera for Skype video Example Instructions

BT Freestyle 750 cordless phone with answer machin...

Similar Messages

Maybe you are looking for