BT Graphite 1500

I have bought a BT Graphite 1500 - is this a new model??
The main question - can I adjust the volume of the handset for incoming calls?
I hope someone can help.
Stuart

Hi and welcome.
Yes the Graphite is still a current model supplied by BT, have a check here in the user guide.
(If I have helped you in any way to say "Thank You" please click on the star next to the message. Thank You)
If I have solved your Issue please click the "Mark as accepted solution" button.

Similar Messages

  • Graphite 1500 and Synergy 2150 compatibility

    Hi Folks,
    Help required. Story and query:
    I had a BT Synergy 2150 with 4 additional 2100 handsets. Eventually I had to replace a couple of the 2100s with 2150s and, later still, swapped the whole thing for a Graphite 1500 Quad set up. Following a question from me, the helpful salesperson at BT assured me I could use one of the working 2150s as the fifth handset - and I did! That handset has now failed, so I should like to use another of the working 2150 handsets as the fifth handset - but I have completely forgotten how I can register this 2150 handset to the Graphite base! Can anyone help?
    The Synergy set up was all in the instructions but I can find no instructions for registering with the Graphite. There must be a way as I did it once, successfully.
    Any advice appreciated.

    Hi Beau_Block
    Welcome to the Community.
    Have you referred to the userguides for both phones, I'll be honest this isn't something I am overly technical on, but if you have mislead the userguides you can access them here.
    Synergy 2150
    Graphite 1500
    Hope they help let us know how you get on.
    Cheers
    Stuart
    BTCare Community Mod
    If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
    We are sorry that we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)

  • BT graphite 1500 - answer phone messages cut short

    Does anyone know how to stop messages that are left on the answer phone being cut off in the midde when replayed. I cannot find any hlep in the user guides about how to extend the amount of time given to the actual messages left. thanks 

    I did some searching for you and found that this is a known issue with the graphite 1500. there is a fix for it apparently. i found this on another forum:
    "we are experiencing the same problem with a BT Graphite 1500. There is no info on website about this but after experimenting found a fix. if you press the ffwd skip button down until you see the numbers start to swirl then - you can record a msg yourself which i did for 2 mins. this seemed to kick in the answer phone length and now it works fine…"
    So it seems like recording your own outgoing message should fix the problem. if you have already recorded an outgoing message, just try and replace it with a fresh one. Post back and let me know if it worked!

  • BT Graphite 1500 answer phone

    Hi, I have had my Graphite 1500 for a couple of years, but have found that despite repeated corrections, the day and time for answer phone messages keeps becoming incorrect. For example, I received a message this morning, Monday AM, but the message was timed as Friday PM. I keep resetting to the correct time, but it goes out again. I haven't monitored how long it takes before things go wrong. I read on another post about a different model that this can because if the year is set incorrectly during set up. But there is no option for the year to be entered.
    Any help would be appreciated.
    Solved!
    Go to Solution.

    Could it be that someone switched the answer machine off by accident?
    Use the "Ans on/off" button to switch the answering machine on or off. By pressing the "Ans on/off" button you can scroll around the 3 options:
    - Answer only;
    - Answer off;
    - Answer and record.
    Let us know if that did the trick.
    Stephanie
    Stephanie
    BTCare Community Manager
    If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post. If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

  • Graphite 1500 Phone / Answer Machine issue

    Hi,
    Don't know if anyone can help with this please....we had issues with our original graphite machine as it wouldn't record. Having gone through BT support etc they advised us to take it back to the shop and exchange it. We did this, but now the replacement doesn't work properly either, as it doesn't record all of the message - eg you often miss the person's number or something as it does not record the last few seconds of the call. Does anyone have any suggestions please? It's rather frustrating!
    Thanks in advance.

    Aaargh!  Tried the "recording my own message" suggestion.  No good!
    Is it worth trying to go directly to the manufacturer?  I am really annoyed about this problem and the fact that it's such a common issue.  Can't BT help the customers that have invested in these telephones?  I have 3 phones and the main base, so it wasn't the cheapest option to purchase at the time.  However, I thought I'd be safe with such a well known company!  Pleeeeeeeeeeeeeeeeeease help!

  • BT Graphite 1500 - answer message sounds like a fa...

    Hi,
    After years of using the answer machine in a quad phone set-up, the answer phone is now playing a message that sounds like a fax machine.
    There is no fax machine plugged in to the phone circuit and it continues even when the IP fax is powered off.  There has been no change to the home set-up for months/years.
    The "fax-like" message plays whatever the setting of the phone:  answer and record, answer only or answer phone off.
    Tried resetting everything I can and powering off!
    Any clues?
    Thanks

    Are you sure it is the phone causing the problem? could there be something else plugged into another phone socket,
    Try unplugging the graphite from the phone line and then call your home number.
    (If I have helped you in any way to say "Thank You" please click on the star next to the message. Thank You)
    If I have solved your Issue please click the "Mark as accepted solution" button.

  • BT Graphite 1500 answer machine

    the answer machine doesn't allow messages to be recorded.
    It answers ok, asks caller to leave a message, then after about 5 seconds closes call and no recording is left.
    The answer and record option is on and I have changed the batteries.
    Any ideas?

    Hi phutcherson,
    Welcome to the forum.
    Sounds like a fault, how long have you had the phone?
    Stephanie
    Stephanie
    BTCare Community Manager
    If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post. If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

  • Answer machine is not playing recording long enoug...

    hello, can anyone help i have a bt graphite 1500 with answer machine,but problem i am having is when anyone wants to leave a message the machine is not running long enough to receive a full message,is there anyway of lengthing the time you have to record? at the moment its about 5 seconds not long enough to record any message which leads me to beleive whats the point of having one!!!! please help anyone out there is they can help or had similar problems. 

    The full manual is here
    http://www.shop.bt.com/content/uni2/documentation/4xz2/graphite_1500.pdf
    However I cant find any way to change the message time which is usually long enough as I think it should just continue until a long silence occurs
    If any post helps tick the star box on the left
    Just cause Im paranoid dont mean they are not out to get me

  • Bt 1500 answer machine

    how do i change the date on my bt 1500 answer machine

    What 1500 is it (studio, graphite, quartet?)
    (If I have helped you in any way to say "Thank You" please click on the star next to the message. Thank You)
    If I have solved your Issue please click the "Mark as accepted solution" button.

  • Error 1500 in Adobe Acrobat 9 Pro Install

    I have Windows 8.1, and I am attempting to download Adobe Acrobat 9 Pro from the content disc provided when I purchased Creative Suite 5 some time ago. During installation, I received the Error 1500 message. No existing forum is solving my problem. I have tried unregistering, then re-registering my Windows Installer. There are also no mid-installation processes in my registry. Also, the fact that I can only get customer support over a forum is unpleasant to me. That seems a little consumer elitist, don't you think? Anyway, I digress. If you can, please help.

    Hi athoopes,
    We apologize for the inconvenience, we would try to help you with this issue.
    I would like to inform you that there could also be an issue with the compatibility between Acrobat 9 pro and windows 8.1 as it was not tested on win 8.1.
    Check system requirements System requirements | Acrobat family of products
    Kindly check if the log files(.GZ) for acrobat is getting created on the below mentioned location.
    C:\Program Files\Common Files\Adobe\Installers
    Thanks,
    Atul Saini

  • The difference between the airport graphite and snow??

    I bought an old graphite base station hopeing to use the airport card inside to use in my MDD Mac. The Lucent card functioned perfectly except it has a built-in antenna so you can not the antenna cable in the MDD nor can you fully close the access door.. The antenna is where the receptacle should be. I understand there is a different card in the snow (not extreme) base station. Does any one know whether that card has a built in antenna or a receptacle for an external antenna? I know there are the old style airport cards on eBay foe about $30 but old airport base stations run about $5 at garage sales.

    The antenna is built into the case in the Snow model. Click here for more information.
    (42915)

  • New Lease of Life for Imac Graphite DV?

    Hi,
    My apologies if this question has been asked a zillion times before....
    I have an Imac Graphite - I think it was called "Special Edition" when I bought it about 8 years ago! I have recently got interested in "Apple-Type" things again and want to see if I can get the Imac into best state possible. Ultimately I will give to my sister-in-law who just does a bit of word processing, email and web surfing, so I don't mind spending a bit on it for an HD etc. That's the background, here's the details:
    400 MHZ PowerPC G3
    256Mb of memory (on 2 128Mb sticks)
    Hard Drive is 13 Gb
    OS is 10.2.8 - I up graded it in about 2003
    The firmware level is not known, but I have a suspicion that when I upgraded to the new operating system a firmware revision will have been done?
    When I do the "OPT-APPLE-O-F" startup I get the message: *"Apple PowerMac 2, 1 2.4f1 BootRom built on 2/18/00"*
    I was wondering if anyone could give me some pointers to both what is possible and what works well in the following areas:
    1. I think the maximum memory is 1 GB? but reading various threads on here it looks like you have to be very careful when selecting memory as to what particular type you use. For instance, I have seen references to PC100 and PC133? If it helps I could pull out one of the sticks and tell you what the part number is for one of the existing?
    2. I think there is a limit on the size of hard drive that can actually be addressed, but I'm not sure what that limit is. Clearly, there is no point in buying a 250 Megabits Drive is if the computer will only recognize 100 Mb? Are there any particular manufacturers brands of hard drive that people would recommend?
    3. What is the highest level of operating system, that can be sensibly used with this machine? I have a feeling it may be 10.4, but I am not sure where I would go to try and obtain a copy. Does it need to be specific to my machine or can I use any upgrade, or is there a generic version that will work with anything? Can this software still be obtained from Apple? (They stopped sending out updates for my 10.2.8 some while ago.)
    4. Lastly any good sites or links that I might look at that "talk you through" any of the upgrade processes?
    Sorry for the length of the post!
    Regards,
    Phil.

    Hello and Welcome to Apple Discussions. 
    The iMac with the 13GB HDD indeed was the iMac DV SE.
    1. The maximum RAM is 1GB (2x 512MB PC100 168pin DIMMs) good quality PC133 will down-speed and work but not all PC133 will. Buy from a Mac-savvy supplier like Crucial:
    Crucial UK.
    2. The addressing limit is 137GB (which translates into about 128GB of actual capacity). So a 120GB HDD is most appropriate. On the iMac DV no partitioning is required but you may if you wish. The bus is an ATA33 so any ATA/IDE drive will be fine (not SATA though). I put a 7,200rpm 60GB Seagate in my iMac DV about 4 years ago and was impressed at the speed. I was also impressed at the low noise of the Western Digital 320GB drive I put in the iMac G4 we have.
    3. With a 7,200 rpm 120Gb drive, and 1GB RAM you shouldn't have any issues running Mac OS 10.4.11 which is the very latest supported. Getting a copy of it however could be problematic. I can't think of anywhere to get one in the UK. You'll need to have a look around Google etc. You should purchase the Retail version only. This came on a black DVD. Machine-specific versions (especially if they say iMac) are likely to be for Intel processors and won't work. You sound like you are aware that you must have the correct Firmware update before installing 10.3 or higher. Hopefully you have OS 9 still installed or have the original orange install discs and can re-install it to confirm the firmware is correct:
    http://docs.info.apple.com/article.html?artnum=75130
    4. Try the Macworld guide:
    http://www.macworld.com/article/2496/2001/10/howtoimac.html
    Since 2001 drives have got cooler so it's fine to use a 7,200rpm HDD.
    Hope that helps.
    mrtotes

  • Safari Won't open password protected Graphite Filesharing Public folder

    Dear people,
    Using Homepage I made my Public folder available to a small group of people, whom I gave my password. I chose Graphite Filesharing. Starting about half a year ago, I got mor and more complaints from people not being able to Login. The password is not refused, but the dialog keeps coming back. This only happens in Safari 3 and Safari 4. Firefox works fine.
    If you need more info, then please leave a URL where I can post a formal bug report with all the details.
    Kind regards,
    Gerard Jonker

    Thanks. Unfortunately that didn't work for me. I tried deleting the bookmark and visiting the site by typing in the address. The same problem still persists. I just sit there staring at the loading symbol spin and spin - hypnotized with anticipation.
    Any other ideas out there?

  • How can I view more than one result on the screen when I search for apps? eg I search for my hobby and there are over 1500 results - one result per screen - do I have to swipe 1500 times to see them all?

    I search for apps about my hobby. There are over 1500 results. Each single result takes up the whole screen. I will have to swipe the screen 1500 times to see all the results. How can I see 8 or 10 results and scroll through fast? Thanks very much for any suggestions!

    Bump:)
    But I've found some online reviews of this and I think we
    are stuck with this amazingly awful search system until
    they realize people like me won't bother searching for or buying
    Apps.
    Does a novel display one sentence per page?
    Do you listen to a radio documentary that transmits one word a minute?
    Or how about a song that is broken into four parts because the singers ran out of breath?
    Searching app products has never been easy or a pleasure, and now it's tougher than ever. Who has the time to swipe 1,600 times? It HURTS - and hurts my brain just thinking about it.
    Woe is me!
    Woe are we!

  • TS3899 How can i delete multiple e-mails from my iphone 4S. There are indicated more than 1500 e., but when i open the file there is indicated: no e-mail.

    How can i delete multiple e.mails from my iPhone 4 S. ? It shows the presence of more than 1500 e-mails. But when I try to open the account it shows that there a no e-mails. So i cannot delete them.

    I would disconnect the email on your phone...
    And reconnect again and if it still does that go on an actual computer, log on and delete the mails with ease...
    Hope this helps..it may just need to be refreshed...

Maybe you are looking for