BT HAVE WITHOUT DOUBT THE WORST AND MOST USELESS ...
So on the last day of April I was made redundant. Luckily I was headhunted by another company and would restart with them in two weeks time.
I IMMEDIATELY contact BT on the 1st May and explained that I would not be able to settle my outstanding bill until the monday AFTER the 1st June. I was pushing my luck a bit i know, but hey ho...
The customer service liar said that it was fine and that as long as the payment was made on the 3rd june (this would be the following monday, and tomorrow as i write this) then all would be fine.
At that point i thought "blimey what a nice bunch these people are". Little did I know......
Halfway through May my service was restricted and I contacted BT immediately and explained. They said they would listen to the call and get back to me...
They did.....
admitted it was their fault and reconnected me assuring me once again that it would be ok to settle the account on the 3rd June.
All was good once again...
Until yesterday (1st June) when I awoke to find the service suspended once again.
So here I was on the phone to them on and off (due to them often disconnecting me and not bothering to call back) for 3 hours. I was told that a manual reconnection had gone through and that it would be working within 24 hours.
I emphasised how important it was that I had internet connection today as I was to chair a conference call for work for a multi-million pound contract and as I had to VPN into our office system to do it it was VITAL it would be working.
PROMISED (laughable) that it would be.
Awoke today.... still no service... contacted BT and was told they could see no manual reconnection yesterday, but they would rush it through and it would DEFINITELY be working within two hours.
TWO HOURS LATER.... still not working.
Rang BT and told them I was SUICIDLE with the hassle this was causing me and threatened to JUMP OFF THE NEAREST TALL BUILDING. I spoke to a chap called "Eddie in the Special Services Dept" He assured me that it wasnt worth ending my life over BTs actions and whilst i totally agree with him, made it clear that it was definitley an option.
He told me as he was in the "special" dept he could make sure that my BB service was restored immediately and even went off to speak with a FEW departments to make sure that my service was working.
"OK Mr *********" he said thats all working now. I explained I was not at home to check but would be home about 8.30pm. He told me to reboot my router when I got home and SWORE TO ME that it would all be working.
ITS **bleep** WELL NOT!!!!!
Therefore... BT you can keep your service. I WILL NOT BE PAYING THE OUTSTANDING BILL AT ALL. I will also be sending an email to Warren Buckley first ting in the morning regarding this and also Mickey Boy Rake too so that they can see just what us customers have to put up with.
Now before you guys say, you should have paid your bill, had I have been told that it was not ok, I would have borrowed money and gotten myself into debt to pay it. But because I was told it was OK I feel that it should have been ok.
BT please feel free to disconnect my services completely and supply me with a MAC code so I can move to another provider. Feel free to sue me for any outstanding balance as I would love to be givine the opportunity to argue this out over a courtrrom table.
Rant over..
AS
Hi ukdeveloper,
Thanks for posting. Sorry for the delay in getting back to you. I can look into this for you if you wish. Drop me an email with the details. You'll find the "contact us" form in the about me section of my profile. Once I have the details we'll take it from there.
Cheers
David
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)
Similar Messages
-
Not rally a question, just wanted to share my absolute frustration with the update of iTunes...this is, without a shadow of a doubt THE WORST application i have EVER used, Mac or PC! And that's saying something with the amount of PC dross that's out there...Apple...PLEASE update and give us back the old version of iTunes...
Pull down View > Show Sidebar. This will give you back the same functionality of iTunes 10.x.x.
-
Just purchased an IPad Air to replace a first geneation IPad purchased several years ago. How do I transfer data from the old to the new without losing the history and data from Apps like Candy Crush? Thanks
How to Transfer Everything from an Old iPad to New iPad
http://osxdaily.com/2012/03/16/transfer-old-ipad-to-new-ipad/
iOS: Transferring information from your current iPhone, iPad, or iPod touch to a new device
http://support.apple.com/kb/HT2109
Moving Content to a New iPad
http://tinyurl.com/qzk2a26
Transferring your prepaid cellular data account depends on your carrier. AT&T lets you move it yourself when you go to Cellular Data in Settings and log into your account with your previous AT&T user name and password. For iPads with Sprint service, you can set up an account on the new iPad and contact Sprint Customer Care (888-211-4727 and go through the menus) to deactivate the old plan and get credit for unused service. For Verizon, call the company’s customer service number for mobile broadband support (800-786-8419) and ask to have your account transferred.
Cheers, Tom -
I want to know how to backup my library to a fixed backup drive rather than to a CD or DVD. I mostly have audiobooks in the library and my computer is running out of space. There are so many that copying them to a CD or DVD would be a horrendous waste of time and resources. Can you please help me?
msscott69 wrote:
I want to know how to backup my library to a fixed backup drive
Copy your ENTIRE iTunes FOLDER to an External Drive...
Full Details Here > http://support.apple.com/kb/HT1751
Also... Have a look at these 2 Videos...
http://macmost.com/moving-your-itunes-library.html
http://macmost.com/moving-your-itunes-media-to-an-external-drive.html -
I have signed to up to iCloud and am pretty sure that all of my settings are turned on appropriately. However I get syncing from iCloud to my iMac and to my iPhone, but I am unable to get my iPhone to sync with the iCloud and most obviously calendar events, so that if adding an event on my iPone it never appears on my other hardware? Can anyone help me sort this out?
Re: check that the appointments in my phone are going into iCloud calendars....exactly how do I do this? I fear this is a really stupid question!
My iCloud account is set up with my Apple ID as one email account (for example [email protected]) which is the email account I use to sign up for internet sites like Amazon, Apple,etc, so that I can differentiate vendors/mass emails. But my default calendar on my iPhone is in a different email name (ie [email protected]) which I use for most communications to friends, relatives, etc. and it is this account that holds most of my appointments. To further complicate things I have other email accounts that I use for business/professional and community work. If I want all my calendars to show on my iPhone AND sync to my iCloud, do I set this at the phone level or the iCloud level? or both?
Let me clarify....It looks like if I go into appointments that I previously set up through my personal account (ie above [email protected]) and edit the entry on my iPhone, selecting the iCloud "home" calendar within the entry, it will then sync to my iCloud account, no problem....do I have to do this to EVERY entry I have? or is there a way to name my personal account as one to sync to iCloud? -
Hello I have an imac with os x 10.7.5 and I have some doubts:
the new version of garageband 10.0.2 is compatible with os x 10.7.5?
I have not installed mavericks. should I install?
Thanks!!It requires 10.9 or later.
Upgrading to Mavericks
You can upgrade to Mavericks from Lion or directly from Snow Leopard. Mavericks can be downloaded from the Mac App Store for FREE.
Upgrading to Mavericks
To upgrade to Mavericks you must have Snow Leopard 10.6.8 or Lion installed. Download Mavericks from the App Store. Sign in using your Apple ID. Mavericks is free. The file is quite large, over 5 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
OS X Mavericks- System Requirements
Macs that can be upgraded to OS X Mavericks
1. iMac (Mid 2007 or newer) - Model Identifier 7,1 or later
2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) - Model Identifier 5,1 or later
3. MacBook Pro (Mid/Late 2007 or newer) - Model Identifier 3,1 or later
4. MacBook Air (Late 2008 or newer) - Model Identifier 2,1 or later
5. Mac mini (Early 2009 or newer) - Model Identifier 3,1 or later
6. Mac Pro (Early 2008 or newer) - Model Identifier 3,1 or later
7. Xserve (Early 2009) - Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
Are my applications compatible?
See App Compatibility Table - RoaringApps. -
I have creative suite version 5.5 Isn't there a way to just upgrade the software without using the cloud and a monthly plan?
Only to the 3+ year old Creative Suite 6
-
My late 2009 27" iMac gets stuck on the grey Apple logo when booting up. It boots correctly when in safe mode. I have tried erasing the HD and re-installing from a USB installer. It says the install is complete, but after restarting it gets stuck on the Apple logo again. This could possibly be an HD failure, but then why does Safe Mode still work and the USB install not work? Any ideas?
1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off merely by the seeming complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the behest of a stranger. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts 51 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports 'com.autodesk.AutoCad com.evenflow.dropbox com.google.GoogleDrive' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 ` route -n get default|awk '/e:/{print $2}' ` 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n\t(%s)\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;5p;6p;8p;12p;' ' {sub(/^ +/,"")};NR==6;NR==13&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/root/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1000) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/d;/(etc|Preferences)\//s/^\.\/[^/]+//p;' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| ","||kMDItem'${p[35]}'=");sub("^.."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[9]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/ { next;} /%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]" "$1;b=b$1;} END { if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|POSIX sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' /^ +[NP].+ =/h;/^( +D.+[{]|[}])/{ g;s/.+= //p;};' ' /^ +B/{ s/.+= |(-[0-9]+)?\.s.+//g;p;} ' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / /{$0="'"${p[28]}"'"};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' 's/0/Off/p' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil PlistBuddy whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '-c Print /L*/P*/loginw*' '-c Print L*/P*/*loginit*' '-c Print L*/Saf*/*/E*.plist' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' '-c Print\ :'${p[35]}' 2>&1' '-c Print\ :Label 2>&1|head -1' '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' -i4TCP:0-1023 com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' );N1=${#c2[@]};for j in {0..8};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;A2 0 $((N1+1)) 2;C0;A1 0 $N1 1;C0;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A1 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D23 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 14 2 48 43;D13 4 5 32 1;D22 4 4 50 0;D13 14 3 49 5;D12 26 48 59 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
8. If you see an error message in the Terminal window such as "syntax error," enter
exec bash
and press return. Then paste the script again.
9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with "Model Identifier." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed. -
Linking to an OBIEE report without showing the user and password
Hi!
we are trying to access to an obiee report from an external portal (coded with php).
The idea is that the user clicks on a link an gets the report in pdf format. For that purpose we are using this url:
http://ttivobiee01:7001/analytics/saw.dll?Go&Path=/shared/Prueba/ogp_obi&Action=Print&P0=1&P1=eq&P2="Criteria"."Key"&P3=1402&NQuser=user&NQPassword=pass&format=pdf
But this url is expossing OBIEE's user and password.
In order to avoid this security issue we tried to do an wget of the url but it doesn't return the report. Instead we get an html, which seams to download the report chunk by chunk (using javaScript).
The question is, is there any way that we could let our portal ussers access to an obbie report without expossing the user and password?
I have been looking into oracle forums and have found this: OBIEE Go URL with password protected
but we couldn't use this aproach due to security issues.
Thanks!
NuriaHi!
We have finally done this (and it works!)
<?php
$urlInforme='http://obi:7001/analytics/saw.dll?Go&Path=/shared/Prueba/ogp_obi&Action=Print&P0=1&P1=eq&P2="Criterios"."Clave oficial"&P3=1402&NQuser=user&NQPassword=pass&format=pdf';
$ch = curl_init($urlInforme);
$ckfile = tempnam ("./", "CURLCOOKIE");
$ch = curl_init ($urlInforme);
curl_setopt ($ch, CURLOPT_COOKIEJAR, $ckfile);
curl_setopt ($ch, CURLOPT_RETURNTRANSFER, true);
$output = curl_exec ($ch);
$ch = curl_init ($urlInforme);
curl_setopt ($ch, CURLOPT_COOKIEFILE, $ckfile);
curl_setopt ($ch, CURLOPT_RETURNTRANSFER, true);
$fp = fopen("salida.pdf", "w");
curl_setopt($ch, CURLOPT_FILE, $fp);
$output = curl_exec ($ch);
curl_close($ch);
fclose($fp); -
My ipad currently has ios 5.1.1 and won't recognize any available update for ios 6. I have tried on the ipad and connected to itunes and both say up to date. How to I update to ios 6?
See the chart below to determine whether you can upgrade your device and what you can upgrade to. If you do not have a Software Update option present on your iDevice, then you are trying to upgrade to iOS 5 or higher. You will have to connect your device to your computer and open iTunes in order to upgrade.
IPhone, iPod Touch, and iPad iOS Compatibility Chart
Device iOS Verson
iPhone 1 iOS 3.1.3
iPhone 3G iOS 4.2.1
iPhone 3GS iOS 6.1.x
iPhone 4 iOS 6.1.x
iPhone 4S iOS 6.1.x
iPhone 5 iOS 6.1.x
iPod Touch 1 iOS 3.1.3
iPod Touch 2 iOS 4.2.1
iPod Touch 3 iOS 5.1.1
iPod Touch 4 iOS 6.1.x
iPod Touch 5 iOS 6.1.x
iPad 1 iOS 5.1.1
iPad 2 iOS 6.1.x
iPad 3 iOS 6.1.x
iPad 4 iOS 6.1.x
iPad Mini iOS 6.1.x
=====================================
Select the method most appropriate for your situation.
Upgrading iOS
1. How to update your iPhone, iPad, or iPod Touch
2. iPhone Support
3. iPod Touch Support
4. iPad Support
a. Updating Your iOS to Version 6.0.x from iOS 5
Tap Settings > General > Software Update
If an update is available there will be an active Update button. If you are current,
then you will see a gray screen with a message saying your are up to date.
b. If you are still using iOS 4 — Updating your device to iOS 5 or later.
c. Resolving update problems
1. iOS - Unable to update or restore
2. iOS- Resolving update and restore alert messages -
My old 17" MBP (2005) often crashes, freezes or shows grey screen at start up. Also track pad often does not work. I have re fomatted the HD and reinstalled system but to no avail. Genius bar says possible faulty HD, but I suspect logic board. All checks out OK on the Apple Diagnostic bench. Can a Logic board go intermittant?? Any Ideas any body??
Ive repaired 1000s of laptops over the years (translate: diagnose and replace parts).
Its not that old, Ive owned 100s of laptops (most were free) ....some I still have are nearly 13 years old and still perfect, ....some extremely expensive ones died in under a year.
other than becoming obsolete at some point, there isnt really any "will spoil on" data like Milk for solid state computer parts, ....alas.
You can have a $5000 laptop die in 4 months, and a junker one keep kicking after 10 years.... Ive seen that firsthand countless times.
Common logic dictates that "very expensive = long life" in computers,..... but all the repair people will tell you just the opposite.
I know you have a gripe, I get that all too well honestly . -
How to download the same song(track) with different keys? iTunes seems to think I have already dowloaded the song and will not let me download the song in a different key or the Demo.
Hello Jigz19,
It sounds like you are unable to play a couple of songs from your library becuase you get a message that the computer is unauthorized to play, but other content purchased that same day works without issue. I would verify that the affected songs were purchased with the same Apple ID first:
Recovering a forgotten iTunes Store account name
http://support.apple.com/kb/ht1920
Open iTunes
Highlight one of the items you have purchased (You can find your purchases in your Purchases playlist).
Choose File > Get Info.
Click the Summary tab.
The Account Name area will list the account used to purchase the item. Unless you have changed accounts, this is your iTunes Store account name.
If so, then delete the songs:
How to delete content you've downloaded from the iTunes Store, App Store, iBooks Store, or Mac App Store
http://support.apple.com/kb/HT5772
Then re download them with this article:
Download past purchases
http://support.apple.com/kb/ht2519
Thank you for using Apple Support Communities.
All the best,
Sterling -
How can I get my castleville legends to connect to facebook? I select the option to connect, it goes to facebook and back to the app, but it still won't connect. I have both restarted the app and my phone wiht no luck.
Hello sdrail81,
The following article provides tips that can help resolve most issues with apps from the App Store.
iOS: Troubleshooting apps purchased from the App Store
http://support.apple.com/kb/TS1702
Cheers,
Allen -
My time capsule is full and when I attempt to back up, I only receive a preparing back up message and the earliest and most recent back up dates remain the same. Why are the oldest backups not being deleted to make room for the newest backups?
linda mariefromharper woods wrote:
My time capsule is full and when I attempt to back up, I only receive a preparing back up message and the earliest and most recent back up dates remain the same. Why are the oldest backups not being deleted to make room for the newest backups?
It may be in the process of making room. What version of OSX are you on? (That process can be excruciatingly slow on Leopard or Snow Leopard backups over a network; Lion has improved it greatly.)
A clue may be lurking in your logs. Use the widget in #A1 of Time Machine - Troubleshooting to display the backup messages from your logs. That should help you figure out what's going on. If in doubt, copy and post them here (but if the same ones repeat over and over, drop most of the duplicates).
If you can, connect via Ethernet; it will be 2-3 times faster. -
When trying to update an app, it partially downloads and then displays the message "unable to download item" Please try again later. This happens on any app I try. I have tried deleting the app and reinstalling with same results. What can I do?
I have the same thing happening on my iPod Touch 5th gen. Been happening for at least a month. I have updated to the most recent version of iOS which hasn't solved the issue. Must be a bug that they didn't get around to resolving yet, a year later. Really annoying to have it pop up when you are in the middle of a game though.
Maybe you are looking for
-
Brightness keys not working anymore and screen frequently flashing black and staying black!
I had my macbook pro in for repair twice last month. They replaced the logic board and had to take the screen off and look at it due to there being a potential crack. Now, when i got the macbook back the first time, after replacing the logic board, e
-
Change the order within the navigation panel
Hi everybody, within my navigation panel i have two iview, the detail navigation and an own iView (Web Dynpro within the dynamic navigation of a page). Until now the detail navigation appears at the first position in the navigation panel. How can i c
-
Job Opening at Moog Bangalore, India
Hello Friends, Moog Aircraft Group, Bangalore is looking for LabVIEW and TestStand Engineers with 2 to 5 years of experience in test automation field. Please find the job description as mentioned below. If interested, please send the resumes to urska
-
When the java program tries to insert the data (around 300 records), the error occurs as "EJB Exception: weblogic.transaction.internal.TimedOutException: Transaction timed out after 95 seconds" Anyone know what happen and how to resolve the problem?
-
HT5192 every time i try to down load a game or anything it says i need iso 4.3 how do i get it
how do i get this i cant play no games