BT Headset works on Mac side but not on Windows side

I just purchased a Plantronics Voyater 510 BT Headset. Awesome! It works great on the OSX side of my iMac with Skype. However when I boot into Windows XP via Bootcamp, I can't get it to work with Skype.
I've sucessfully paired it to Windows, but the headset does not show up as a device in the Skype options. I'm stumped here and wondering if anyone else has run into this problem.

Still unresolved but just want to clear my Unanswered list

Similar Messages

PDF-Presentation works with Macs keynote but not with iPad keynote ???

Using this Converter PDF to Keynote" ( http://www.cs.hmc.edu/~oneill/freesoftware/pdftokeynote.html ) PDF-Presentations works totaly well inside Macs keynote. Transfering with iTunes to the iPad works well, too. But opening such a presentation in iPads keynote results in "Could not import, unknown error".
Are there any tips or tricks?
A.

Hi,
I didn't understand how you fixed the problem.
Could you please explain step by step how you sorted it?
Thanks

Internet connectivity works in OS X, but not in Windows 7 Ultimate

I have a new Mac Mini. Mid 2011. 2.3 GHz i5. 8 GB RAM.OS X Lion 10.7.3. Windows 7 Ultimate.
I used Bootcamp to install Windows 7 Ultimate on a partition. All drivers are apparently up-to-date -- they were installed through the Bootcamp Assistant. Internet connectivity works fine in OSX, but is very unstable, if even existant, in Windows. If I do have a connection, I have download speeds of <1Mbps.
Any thoughts on what may be causing this?

Hello, I don't think I can help, I do have 10.7.3 & W7 Ultimate, but I run W7 in Parallels...
http://www.parallels.com/
And it uses Shared Networking of OSX.

Wireless internet work on MAC's but not on the PC's

I just bought the time capsule recently, set it up and all that good stuff. I have two MAC's connecting wirelessly with on and off speeds. I also have two PCs with wireless card. Before time capsule i was running on a Linksys WRT54G and the wireless worked fine on both MAC's and the PC's. The problem i am having is that the internet on the PC's are always down. I would have to go through the diagnostics test or making the internet come back to life with renewing the IP's or clicking "Repair". When it does work it works fine, then couple hours later the internet dies. It is never connected. Where as on the MAC's it is perfectly fine anytime. Before on the Linksys i could have my PC's up 24/7 and the internet wouldn't die. Any suggestions or tips? anything please. THANK YOU!
running from the DSL PPPoe directly to the time capsule through WAN port.
Connection : ALWAYS ON.
Wireless Security : WPA/WPA2
Channel: 1(Automatic)
Radio Mode : 802.11m (802.11b/g compatible)

I have had a couple of occaisions where the WiFi on my Macbook Air got in a knot. It seemed to come good after power cycling the router.
You could try removing your network from the computer and then adding it back again.
System Preferences > Network > select WiFi > click Advanced > select the WiFi tab > click the name of your network > press the minus button to remove it. Then add the network back again.
Hope this helps - Mark

Caps Lock lights up but doesn't work in Mac OS (but does in Windows)

My Caps Lock button lights up but caps do not work in any Leopard programs. If I hold down the Shift key then caps will work.
However, I have Parallels and caps lock DOES work when running Windows.
I checked the Modifier Keys settings in keyboard preferences and they are set to the default.
I am new to Apple and have a Mac Book Pro that I bought in Spring 2008.
I searched the discussions but didn't see my situation...

Hi Steve, Welcome to apple discussions.
Hmm, that is a strange problem. Well, you've already done what I would suggest which is to go to the keyboard settings and click the "Restore defaults" button in the modifier keys window and try again. If that doesn't work then you can restart the computer and check. If that doesn't work you can try to reset the pram. Hold the optioncommand+PR buttons after you hear the startup chime, it should chime again, I let it chime a third time just for good measure and see if things look better.
If that fails then you can try making another account and seeing if the caps lock works in the new account. There might be some strange error on your account that would be corrected for in a new account. After that it gets more labor intensive. Do a system re-install, do an erase and install.
You might consider a trip to the apple genius bar there in Honolulu if can. The should be able to run through all that for you. You're still under warrantee so take advantage and get some help.
Oh, and just a disclaimer that I learned from Adam on the maccast podcast. Make a full, complete backup including a time machine and bootable (like superduper or carbon copy cloner) disk before you do any of the above or take the unit it for service.
Hope this helps.
John

Copy / Duplicate a CD works for the MacOS but not for Windows

Hi all,
i burnt some jpg's on a CD with my Mac (drag & drop within
the Finder). This went fine: i can read the CD on my Mac
and on my Windows-PC.
As i need y couple of copies from this CD, i thougth that
the "drag & drop" thing within the Finder is to much effort
and i created an image of the CD with the DiskUtility.
After that i burnt the image on new, empty CDs. All of them
worked fine on my Mac, but non of them were readable on
any Windows-PC.
So i started a workaround with the "burning-folder". That
works, but it is a little bit uncomfartable in comparison
to working with images.
Sadly i found no way to create an burn an image which works
on Windows-PCs.
Is there no way to copy / duplicate CD, that are readable
on Windows-PCs?
Thanks a lot, Stefan

Hm, i testet something and i do not know, why two different things come out:
1) i began to create an image from the CD, which i created at first, which works
on my Mac and on my Windows-System.
So i could choose the following formats: read-only, compressed, read/write, DVD-/CD-Master.
2) if i create an image from an existing folder from my harddisk, i have the same options
PLUS "hybrid-image". If i choose this format and burn it, the CD works on my Windows-System, too.
So the question is, why the hybrid-image only available for images which are created
from hardisk-folders and not from an CD?!

Fixed header working fine for desktop but not for windows phone

I have my website in asp.net with master page. I have used below css for header div of my website to make it fixed.
.header{
z-index: 3001;
position:fixed;
top:0px;left:0px;
background-color: white;
width:100%;height:150px;
This is working fine for desktop. But on mobile, I can only see my 50% of width of the header. On the right side of 50%, nothing is cmg. As in just white background is cmg. On the right side, I have a button which when I click is working. To say, controls are
not visible but they are working if u manage to click at the exact place. Any fix for this?
I want to add that this problem is coming only in windows phone. So need fix for that.

Hi User1508372,
The
Developing for Windows Phone forum is for developers to discuss writing Windows Phone apps, not for writing web sites targeting Windows Phone IE.
My guess here is that your site may be running into a compatibility mode or different versions of IE on desktop and on Windows Phone, but you don't provide enough information about which versions of IE you are using. Windows Phone 8 uses IE 10 (similar to
Windows 8).
The folks in the
Windows Phone IT Pro forums are likely to know more about the Windows Phone IE specifics, and the folks in the IE or ASP.Net forums will know more about how to target your HTML for different versions.
--Rob

MP3 tags work in iTunes 11 but not in Windows 7 - Fixed

I tagged a bunch of MP3 downloads in iTunes 11, but the artist/track/album and other information did not show up in Windows 7 file information or in Windows Media Player.
The fix that worked for me was to convert to MP3 tags to ID3 tags to version 1.0.
Steps:
-Open iTunes
-Find the songs you want to convert in the Songs view
-Right click the songs
-Choose Convert ID3 Tags...
-Check the box for ID3tag version
-Choose v1.0
-Click OK
Your mileage may vary, of course, but this worked for me and all of the embedded info was properly updated. Note that I did not have album art and I don't know if rolling back the version will affect that. Good luck.

Thanks turingtest2.
I tried your None>2.3 path and it appears to be a superior method to my original suggestion.
I hadn't noticed, but the track #s did not come through to Windows using my original method. They come through when converting to None then to 2.3. Your method, as you note, also provides the advantage of longer field lenghts. I am sure there are other advantages to 2.3 over 1, if nothing other than it's closest to the most up to date standard.
I tried converting to 2.4, but none of the data comes through to Windows.
Here is a revised set of steps. Note that this method will clear artwork.
-Open iTunes
-Find the songs you want to convert in the Songs view
-Right click the songs
-Choose Convert ID3 Tags...
-Check the box for ID3tag version
-Choose None
-Click OK
-Choose Convert ID3 Tags... again
-Check the box for ID3tag version
-Choose v2.3
-Click OK
Last comment: There may be better solutions using other software such as id3tagit, but the solution above works right from iTunes.

WLC only connects to MACs, Androids, but not to Windows PCs since today

Since today we have a curious "feature":
Only MAC and Android clients are able to connect to the WLAN, locked by WPA2-enterprise/Radius (Windows domain server with NAS). Windows clients are denied.
Does anyone have the same epxeriences?
Markus

I found the solution after sveral hours of searching in google and the log-files of the NPS:
http://support.microsoft.com/kb/933430/en-us
Our NPS-Server contains to many entries in the trusted root certification list!!!
I tried to delete several certificates, but as you can see in http://support.microsoft.com/kb/293781 this can be very critical, since I don#t know, which certificates are needed for the system
So I used Method #3 in http://support.microsoft.com/kb/933430/en-us afterwards and now it seems, that all clients can connect again.
Markus

Script Works on MacBook and Mac Mini but Not MacBook Air

I just bought a new Mac Mini and 11' MacBook Air, and I have a script that works on the former but not the later. Running it on my Air generates the error, "error "Finder got an error: Can’t set alias "My Hard Drive!:directory path:File Name copy.doc" to "FileName}doc"." number -10006 from alias "My Hard Drive!:directory path:File Name copy.doc".
Here is the script:
tell application "Finder"
set theFile to item 1 of (get selection)
set TheName to name of theFile
set duplicatedFile to (duplicate theFile) as alias
end tell
set capName to do shell script "/bin/echo " & quoted form of TheName & " | /usr/bin/awk '{for(i=1;i<=NF;i++)sub(/./,toupper(substr($i,1,1)),$i)}1' | tr -cd [:alnum:]_. "
tell application "Finder" to set name of duplicatedFile to capName
set longURL to "http://domainname.com/" & capName
set curlCMD to "curl --stderr /dev/null "http://bit.ly/api?url=" & longURL & """
set bitLy to (do shell script curlCMD)
set the clipboard to bitLy
set curlFTP to "curl -T " & quoted form of POSIX path of duplicatedFile & space & quoted form of ("ftp://unsername:[email protected]/path/" & capName)
do shell script curlFTP
tell application "Finder" to move (duplicatedFile as alias) to trash

There is a problem with duplicate names.
!http://farm2.static.flickr.com/1283/5188829536_841015b22c.jpg!
I am not sure what statement failed for you. Please clarify if I guessed wrong.
I did encounter some problem with the exclamition point in a name.
There could be a problem with exclamation point in a url, but didn't try.
You could use unix to do the rename.
tell application "Finder"
   set theFile to item 1 of (get selection)
   set TheName to name of theFile
   set duplicatedFile to (duplicate theFile) as alias
end tell
log duplicatedFile
set capName to do shell script "/bin/echo " & quoted form of TheName & " | /usr/bin/awk '{for(i=1;i<=NF;i++)sub(/./,toupper(substr($i,1,1)),$i)}1' | tr -cd [:alnum:]_. "
-- Use unix to rename
set unixName to POSIX path of duplicatedFile
log "unixName=" & unixName
set baseP to do shell script "dirname " & quoted form of unixName
log "baseP=" & baseP
set baseN to do shell script "basename " & quoted form of unixName
set baseN to quoted form of baseN
set baseP to quoted form of baseP
-- Rename the file.
set what to do shell script "cd " & baseP & "; " & "mv " & baseN & " " & capName
-- tell application "Finder" to set name of unixName to capName
log "what=" & what
set longURL to "http://domainname.com/" & capName
log "longURL=" & longURL
set curlCMD to "curl --stderr /dev/null \"http://bit.ly/api?url=" & longURL & "\""
log "curlCMD=" & curlCMD
set bitLy to (do shell script curlCMD)
set the clipboard to bitLy
set curlFTP to "curl -T " & quoted form of POSIX path of duplicatedFile & space & quoted form of ("ftp://unsername:[email protected]/path/" & capName)
do shell script curlFTP
tell application "Finder" to move (duplicatedFile as alias) to trash
Robert

LR 5.6 on Mac desktop all of a sudden will not read any card from any reader but will work on my laptop. I can work on previous images but not import new ones. Even if I create a catalog on laptop and import to my desktop on a thumb drive, the images are

LR 5.6 on Mac desktop all of a sudden will not read any card from any reader but will work on my laptop. I can work on previous images but not import new ones. Even if I create a catalog on laptop and import to my desktop on a thumb drive, the images are only accessible as long as the thumb drive is inserted.

Sounds like you may need to repair the Disk Permissions on your drive where your images are stored.

I have a bluetooth headset that only works in phone feature but not in itunes or apps on my iphone, please help

I have a bluetooth headset that only works in phone feature but not in itunes or apps on my iphone, please help.
It works fine through my macbook, can't find anything in settings on iphone to resolve problem

The headset has to have A2DP capability, which most (I believe) do not.
http://en.wikipedia.org/wiki/Bluetooth_profile

When i burn videos to a dvd-r disc it works on my macbook but not on a windows/pc or my dvd player. How can i make it work on all the above and not just a mac product?

when i burn videos to a dvd-r disc it works on my macbook but not on a windows/pc or my dvd player. How can i make it work on all the above and not just a mac product?

Unfortunately, the recording & movie industry does not respect the rights of the people who make them money, and thus you can only use the paid-for content in ways they see fit. Even if I lived in a bunker where no one else could possibly see the movie I paid for, therefor I'm not 'sharing it illegally', I would still not be allowed in a blue moon to copy that movie to DVD for TV viewing. Someone will tell you to get an AppleTV. How about Apple give us one for free? Until this changes, people wanting to use their content in multiple locations will continue to download music & movies via torrents, legally or illegally.

I mostly work on Mac desktop, but use a Macbook Pro on trips. Due to limited HD space on the latter, I want to create a library of part of the images on the Mac, to be used on the Macbook. I do not however want to remove these images from the Mac library.

I mostly work on Mac desktop, but use a Macbook Pro on trips. Due to limited HD space on the latter, I want to create a library of part of the images on the Mac, to be used on the Macbook. I do not however want to remove these images from the Mac library.

Choose one or more Projects, and then use Export as New Library (from File). The resulting export will be a fully functioning Aperture Library to either transfer and open on the Macbook Pro, or to Import into a library you already have on the MBP.
Ernie

Have Sony reader 505, ADE doesn't recognize when attached to mac OX 10.6.8. works with reader library but not with ADE

Have Sony reader 505, ADE doesn't recognize when attached to mac OX 10.6.8. works with reader library but not with ADE

YEAY!
I just got the solution (that worked for me, anyway) from a Sony support rep. No PC or VMWare needed.
OK, you've installed Sony eBook Library v3, and Adobe Digital editions, you've set up your acocunts and authorized your computer on both of them, and you've authorized your Reader with the Sony Library application.
You go to the public library ebook download page, either through the Sony Library or just through a bookmark.
You check out a book, and open it in Adobe Digital Editions, which still won't recognize your Reader.
BUT, in the Sony Library app, you can now click "File, Import.." and go find the pdf you downloaded with the Adobe app.
On my Mac, it was in ~/Documents/Digital Editions
Import it, and drag it to your Reader.
The first time you do this, it will ask you to authorize the Reader with your Adobe ID.
Worked like a charm.

BT Headset works on Mac side but not on Windows side

Similar Messages

Maybe you are looking for