BT HH4 Unlock for non BT ISPs

Evening All
Just wondering if anyone out there can help? I bought a HH4 off a friend hoping to use this on Vodafone ADSL Broadband here in Ireland.
I can access settings menu to update broadband user names and PW (as well as update VCI/VPI settings for Ireland) however the HH comes back with a message that the username is incorrect/not supported.
I've tried a number of different UK BB provider User name/PW combinations but none of these are accepted either so it seems that the HH4 is locked to BT.
Looking online there is an Unlocked version of the HH4 available at Currys (and Argos soon):
Just wonder if there is an unlocked veriosn of firware for the HH4 I could flash to my HH or does anyone have any idea if an unlock is available for the HH4?
All previous versions of the HH (except the HH3B) were unlocked using unlocks developed at Psidoc.com but his site is down and I don't think it'll be back
Thanks in advance
Baz

I'll post now before the morning edit. Crikey, it's sad to find out that 'that' site is no more
Plus it makes me wonder why and who dunnit.
Baz. I don't believe anyone ever did try/bother to crack it. Guess you could lurk around another non BT site to see what the official unlocked hub firmware is?
-+-No longer a forum member-+-

Similar Messages

G2 unlocked for international use?

Hi! I have a Verizon G2 phone and was wondering if the device is already unlocked for use in Korea.
Thanks!

It is unlocked, but the bands and frequencies in use might be different on the Korean carrier, and the VS980 might only work on 1 of those, or none.

Warranty Not Honored For Non-activated iPhones?

Hello,
Is it true that Apple will not honor warranties against manufacture defects for iPhones that have not been activated? I went back to the store where I purchased my iPhone from, and that was exactly what I was told, however, the store manager could not find where it explicitly states that under the terms and conditions for warranty. Can someone please clarify this?

If your iPhone was purchased in the U.S., it was sold as carrier locked with at&t only. None of the iPhone functions work until the iPhone is activated with at&t, or hacked to be unlocked for use with another provider.
Copied from the written warranty.
+This warranty does not apply: (a) to damage caused by use with non-Apple products; (b) to damage caused by accident, abuse, misuse, flood, fire, earthquake or other external causes; (c) to damage caused by operating the product outside the permitted or intended uses described by Apple; (d) to damage caused by service (including upgrades and expansions) performed by anyone who is not a representative of Apple or an Apple Authorized Service Provider (“AASP”); *(e) to a product or part that has been modified to alter functionality or capability without the written permission of Apple;* (f) to consumable parts, such as batteries, unless damage has occurred due to a defect in materials or workmanship; (g) to cosmetic damage, including but not limited to scratches, dents and broken plastic on ports; or (h) if any Apple serial number has been removed or defaced.+
I believe the highlighted portion for exclusions applies to a hacked/modified iPhone for use with another provider. Doing so alters the functionality or capability.
An iPhone sold in the U.S. is designed to function as activated with at&t only.

Cannot access forum from non BT ISP

It was a few weeks ago so presume still the same, I wanted to check this forum from work through the corporate non BT ISP and got a message that I couldn't because I wasn't on a BT line. Couldn't even log in. Surely given that we might have problems with BT and need this forum when the line is down or something that is a nonsense!!??
Solved!
Go to Solution.

This is probably the message you saw if you accessed a link to my forumhelp pages.
"Sorry - You must be connected to BT Broadband or the BT network to use this website.
This is a private website for the benefit of BT Broadband customers who use the
BT Customer Support Community
website, and is not connected with BT."
It better than just giving the standard 403 (Unauthorised) message
That would have come from my webserver if your IP address did not originate from the BT network. This is done to allow me to manage the level of traffic, and keep out web spiders and most hackers.
I am sorry if it caused you any inconvenience, but you should have been able to access it from home, and even a BT wifi, BT FON, or BTOpenzone hotspot.
If anyone does have problems accessing my site from the BT network, then please tell me what your current public IP address is, and I can check it against my routing table, as BT keep adding more POP sites, and its possible they may be missing from my list.
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

Which OS, Version, Best Setup on like-new 2008 MBP for non-HD archival DV?

MacBook Pro 15"
(Early 2008)
2.4 GHz Core 2 Duo
4GB RAM
720GB 7200rpm Hard Drive (original 360GB 5400rpm drive also available)
OS 10.6.8
(6GB RAM possible but additional $100+ for 4GB module needed now for software upgrades)
    I first and last used Final Cut Pro 2-3 in film school on a Titanium PowerBook (500MHz!) during the OS9/X transition. Next, was an Aluminum PowerBook (1.67Ghz) but because of life changes, I did little editing other than occasionally in iMovie. Then as an early adopter of iPhone/Pad, I rarely used my AlPB other than for back up, writing, and occasional simple editing.
    Now I'm finally entering the early MacIntel age with a pristine "early 2008" MacBook Pro bought for $250 from an elderly original-owner couple who used it only at home for email and iPhoto. Though at the end of its supported life, it's practically new with a known history of light graphics usage (no video or gaming rendering ever) delivered in the original box with original battery (only 46 cycles!), discs, manual, like-new charger, and no sign of wear. The original internal wrapper was even saved and put back on the device! Furthermore, because the wife was a photo enthusiast, the Apple Store swapped out her internal hard drive for a Western Digital 720GB 7200rpm drive and the husband just gave me the original 360GB drive!
    I want to do several things with this "new" device. I've done a lot of research but the world has changed since FCP 3 and the G4 processor and I'm overwhelmed with all the possibilities. I need guidance and have always appreciated the wisdom and generosity of the gurus here. I thank you all in advance!
iCloud integration: I'd like it since I'm an iPhone/Pad user. I could upgrade to Mountain Lion but Mavericks, under the best of conditions, is doable on my device and may give me improved CPU and battery performance. I realize this is best left for the OSX forums. HOWEVER...
Final Cut Pro: I want to also return to editing in FCP an unfinished documentary using primarily archival film and video converted to non-HD DV. This may greatly impact how I set up my drives and the decision as to which OS is best. So, this should probably be my initial decision.
Hard Drive: First and foremost, I should probably swap the drives and place the 7200rpm drive into an enclosure (Firewire or is that stone-age?) for FCP media, correct?
OS: With Mavericks, I must use FCPX which is beyond my current non-HD needs and will most likely strain my system resources. However, the new simplified interface is appealing and I've read some users are running it on "early 2008" MBPs. If an earlier OS is better suited, then which one? And also...
FCP Version: Which is most stable given my model? And which is best for non-HD needs? What about FCExpress? I want to explore more possibilities than what's available in iMovie and would appreciate the simpler interface found in FCE and FCPX, especially since I haven't used any Final Cut since FCP 3 but will gladly embrace what's best. I want to relearn the program and hope to continue using it for other projects.
Partitioned drive: Finally, what about partitioning my drive, one for daily life running Mavericks or other OS, the other solely dedicated to an optimized OS/FCP for non-HD editing? Even at 360 GB it should be doable if I keep it lean and the bulk of storage externally (I ran FCP 3 adequately on a partitioned 40GB drive back in the day). How much space should I dedicate to an FCP partition?
    Finances are tight and I'll need to upgrade Office, other apps (I know there's Rosetta in Snow Leopard but must weigh that with iCloud integration; decsions, decisions!) and probably locate an older copy of FCP on EBay or elsewhere which could be expensive. I must wait a bit before swapping in a 4GB RAM module and possibly upgrading to an SSD. Meanwhile, I'd like to experience this like-new MacBook Pro now, both as it was during its heyday and with what's still possible today. It seems doable and I appreciate any and all suggestions.
Thank you all and have a great day!
Evalyn
PS: I realize my FCP3 files are probably useless and plan to reimport everything into a new project. And sorry for the lack of paragraph spacing. Can't get it formatted right on the iPad!

CyberFinch wrote:
FCP Version: Which is most stable given my model? And which is best for non-HD needs? What about FCExpress? I want to explore more possibilities than what's available in iMovie and would appreciate the simpler interface found in FCE and FCPX, especially since I haven't used any Final Cut since FCP 3 but will gladly embrace what's best. I want to relearn the program and hope to continue using it for other projects.
Just to note that there is much more commonality between FCP3 and FCP7 and/or FCE than with the early version and FCP X. IMO, learning FCP X is worth the effort, but it will require some effort since it is so different than traditional NLE's. You could "get by" with FCE for many types of projects and you should be able to find a copy on eBay or Amazon for a few hundred dollars. However, you will not be able to open a FCP project of any version with it. Also, I don;t think I would agree that its UI is simple; it's essentially the same as FCP.
As for partitioning, some people advise against editing from drives that have been partitioned. I use a partition on one machine and I've not had any problems, so I think it is an option.
As you can see from the replies you've received so far, you have reasonable choices. Good luck.
Russ

ISE 1.2 - Posture Detail Assessment - enforcement audit mode report not show status for non-compliant

ISE 1.2 - Posture Detail Assessment - enforcement audit mode report not show status for non-compliant.
- For old version 1.1.4 it can be reported for non-compliant, How can I generate report for this?
Thanks
Kosin Usuwanthim

It used to be in there (id 226635 is the last one with it); should I clean it up a bit and put it back with a bit more of a disclaimer?

Service desk for non-sap (please - any inputs are welcome)

hi all,,
I know how to setup service desk for SAP use. Can some one provide me some tips on using solution manager - service desk for non-sap as well? eg: the company wants to use service desk for normal activities as well, as laptop not working, server down, other system issues etc.
The questions I have are -
1) Any specific structure to be created for the non-sap? The way we use in SAP specific environment is to use "SAP Components" while creating tickets. How can we create tickets for non-sap components? What will be the "responsibility" selection?
2) How about the Ibase? For SAP, the ibase already have the data from SMSY. How can I get data for non-sap systems? Anything is SAP to keep the Asset management data (like entries of laptops, servers etc)
Thanks for all the suggestions !!
JZKALH

Hi
You need to go for service desk XT which is the extension of service desk to manage non sap or IT incidents
Check below link
https://websmp110.sap-ag.de/_solutionmanager
Heterogeous system environments are a challenge for IT-service management in any company. The associated complex structures and varying forms of media often make it difficult to realize efficient service processes. With SAP Solution Manager Service Desk - Extended Usage (Service Desk XT), SAP offers a centralized support tool as a single point of access - for service requests and problem tickets related to SAP and non-SAP software.
The Single Point of Access for Support
SAP Solution Manager, which is a standard part of every SAP solution and therefore can be used by all SAP customers, supports users in SAP relevant service requests. The standard function of the service desk is restricted to service requests.
With Service Desk XT, SAP provides an extended support tool, which can be also used for general service requests, for example regarding IT or telecommunication equipment.
This priced add-on does not require additional interfaces to third-party products - the same service requests are used for SAP and non-SAP applications. This simplification is a benefit for your employees.
This solution has been created with IT service providers in mind, especially those which work within a company and currently do not have an IT-service desk application in place or would like to replace an existing system.
Also,
check this link
pg(46)
https://websmp205.sap-ag.de/~form/sapnet?_FRAME=CONTAINER&_OBJECT=011000358700000147532009E
Pg 52 onwards
https://websmp205.sap-ag.de/~form/sapnet?_FRAME=CONTAINER&_OBJECT=011000358700000059742008E
https://websmp205.sap-ag.de/~form/sapnet?_FRAME=CONTAINER&_OBJECT=011000358700000548652007E
Hope it helps
Regards
Prakhar

How to allow access to winrs for non-admin user?

I have Windows Server 2012 (and Server 2008, but it is next priority) to monitor it using txwinrm. txwinrm library internally is using WinRS protocol. I have to monitor it using least privileged user, but don't know how to configure access for him.
All I managed to do - is to configure remote Powershell session for my user, but it's look like that winrs and powershell sessions have different security descriptors:
Invoke-Command -ComputerName 192.168.173.206 -Credential (credential Administrator $pwd) -ScriptBlock { 2 + 2}
# gives 4
Invoke-Command -ComputerName 192.168.173.206 -Credential (credential lpu1 $pwd) -ScriptBlock { 2 + 2}
# gives 4
winrs -r:192.168.173.206 -u:Administrator -p:$pwd 'powershell -command "2+2"'
# gives 4
winrs -r:192.168.173.206 -u:lpu1 -p:$pwd 'powershell -command "2+2"'
# Gives Winrs error: Access is denied.
Configuration for my user is following:
(Get-Item WSMan:\localhost\Service\RootSDDL).value
# O:NSG:BAD:P(A;;GA;;;BA)(A;;GA;;;S-1-5-21-3231263931-1371906242-1889625497-1141)S:P(AU;FA;GA;;;WD)(AU;SA;GWGX;;;WD)
(Get-PSSessionConfiguration -name Microsoft.Powershell).SecurityDescriptorSddl
# O:NSG:BAD:P(A;;GA;;;BA)(A;;GA;;;S-1-5-21-3231263931-1371906242-1889625497-1149)S:P(AU;FA;GA;;;WD)(AU;SA;GXGW;;;WD)
(In each security descriptor my user is given general access to protected object).
So what security descriptor should I set to make my winrs query work for non-admin user?

Hi Bunyk,
I can not recreate the erroe you posted, and please also post the screenshoot in your convenience.
I tested with a non-domain user but has the local admin permission of the remote computer, and this worked, before running the remote cmdlet in powershell, I also configured the TrustedHosts.
In addition, the access denied could be also caused to the Protocol Filtering on the remote server, for more detailed information, please refer to this thread:
winrs error:access is denied
I hope this helps.

"SSO" for non-sap web application using SAPGUI to browse?

I have a web application (non SAP) and the user base are also SAP users in an ABAP system.
To strengthen the authentication in the web app, I wanted to implement SSO
authentication as we pity the users for having to remember so many strong pw's and I
dont like LDAP based pw sync or other technology I dont understand, because then we are
just yet another application with the same pw...
We are having technical problems implementing SSO on the web app side, and are anyway a
bit sceptical about the user admin / role admin assignment if we get it to work.
So I have created a transaction in SAP which browses the web app and the intention is to
send the SAP sy-uname as the web app user. We can control this using s_tcode, and
an own auth object on the WAS side and a check on the session type before the connection is
established. In this sense we are dependent on the SAP concept implemented, but even so:
The role assignment is controlled in the web app itself -> so assume that I am not overly
worried about unauthorized access to the web application, as they would not have any
system role for it as their sy-uname does not exist. (Infact we can monitor this)
The browser on the front end is the SAPGUI with html controls on the SAP side.
I would be interested in knowing whether anyone else has experience with this approach, and
whether there are any areas to be carefull of?
I would also like to know whether this is a strategic error?
Kind regards,
Julius

Hi Julius,
well, if that web application would run on the same ABAP backend system then the solution described in <a href="http://service.sap.com/~iron/fm/011000358700000431401997E/0612670">SAP Note 612670</a> would be applicable:
a so-called "Re-entrance ticket" (based on the "SAP logon ticket" SSO proceedings) is issued, transported via the SAPGUI connection and back to the system via the invoked HTML control.
But for non-SAP web applications that does not help.
In that case only X.509 client certificates can be used for SSO. Actually, the web application could then also be invoked directly (independent from the SAPGUI session). The user is authenticated based on the X.509 client certificate - and not based on the ABAP userID (of the SAPGUI session).
Well, if you don't mind the effort you could also use the "SAP Logon Ticket evaluation library" (sapssoext, see <a href="http://service.sap.com/~iron/fm/011000358700000431401997E/0304450">SAP Note 304450</a>) to evalute the SAP logon ticket externally. You'll then need to have a "stub application" at the ABAP side that triggers the http redirect to your external web application. Not a nice solution but a possible one.
In the future SAML browser artifacts would be an option (preferable to integrate non-SAP applications). But currently that's not available (for NWAS ABAP).
Cheers, Wolfgang

SSO FOR NON SAP APPLICATIONS

SSO for non sap applications in EP on which siteminder sso is integrated
Posted: Aug 28, 2006 7:09 AM Reply E-mail this post
Hi ,
we have implemented Siteminder on SAP PORTAL 6 SP16 for authentication.I would like to integrate non sap application in Portal.I could not find any documentaion for setting up non sap application's in portal on which siteminder external authentication is implemented.
can anybody help for getting step by step document.
diff rewards to be given

Hi,
if you have access to service.sap.com via S-User, you can download "SAP Enterprise Portal Security Guide" in the portal section. It has dedicated descriptions about SSO-Settings, also about netegrity.
You can also search help.sap.com about "SSO" which gives you overview descriptions.
On SAP Service Net, there is also an pdf "Integrating Security functions" in the Netweaver 2004s Portal section, where the description of the Java API for the PDK is included. This is very helpfull for coding.

Unity: Voice-mail for non-Exchange subscribers

Hi everyone!
I have this issue: customer wants to enable voice-mail for non-Exchange users, I've created them as Internet subscribers for using with auto attendant, but I can't enable voice-mail for these extensions, basically the customer does not want for this users to receive the messages in their mail just only check it on IP phones. Is there a possible way???
Thanks in advance for your help

To add to Hailey's comment, here's the documentation that explains the behavior/limitations of Internet Subscribers in case you're interested in checking it out:
http://www.cisco.com/en/US/docs/voice_ip_comm/unity/5x/networking/guide/ex/5xcunet040e.html#wp1050583
Hope that helps,
Brad

I connected my iphone 4s that i unlocked for t-mobile. I plugged it into itunes, and it asked me to update to ios6. I accepted the download and update button. it told me it needed 8 hours. i closed my laptop. not shut down. i opened and it wants restorin?

I connected my iphone 4s that I unlocked for t-mobile. I plugged it into itunes, and it asked me to update to ios6. I accepted the download and update button. It told me it needed 8 hours. I closed my laptop, not shut down. I re-opened the laptop a few hours later, and it wants restoring?? Whats going on?! i want my iphone back! PLEASE HELP. I'M LOST!!! (I synced my iphone to my computer if that helps at all).

Yes, and, I try to restore. I have the T-Mobile sim card in it just to clarify. It will not let me get passed that, it does not accept the t-mobile sim card. i tried restoring it using wifi, cellular, and i cant get i tunes. I am scared that if i take the tmobile sim card out and put the at&t one in just to complete the restoration process that the iphone will lock again and not read the tmobile sim card, then all my hard work has gone for nothing. ( this whole process was caused by me trying wanting to empty my pictures onto my computer because i did not have any storage space left). <--- that may not be as important, but i included it just because.

Vendor Report per Plant for Non POs

Hi
We want a report that shows the Document date, the Invoice date, the vendor, the Plant, the value for Non POs. Is there any table or report, which can provide us with the mentioned data.
Quick Response will be appreciated.
Thanks & Regards
Edited by: Mehak Malhotra on Feb 16, 2009 9:18 AM
Edited by: Mehak Malhotra on Feb 16, 2009 9:18 AM

Hi Vikrant,
Thank you so much for your quick response. Just wanted to confirm if MB51 includes the vendor with PO and Non POs. As I am specifically looking for Vendors with Non POs. eg a consultant to a plant can also be considered as vendor who has no POs. I am trying to collect that information.
Thanks & Regards

Storage Location for NON valuated material in MIGO

Hi friends ,
I have created a purchase order for NON-Valuated material (UNBW) with Account Assignment "K".I did check the material type UNBW configuration where only Value Update is checked for my Plant.
Now at the time of MIGO , system is asking for Storage lcoation (mandatory) and after MIGO system also updates quantity in Storage Location entered in MIGO.
while in normal cases (like ROH material type) , if we create Account Assigned PO ( like K) , system neither ask for Storage lcoation at the time of MIGO , nor system updates Qty at any storage location.
As per my understanding , if we create Purchase Order with account assignment K , system updates value in consumption and doesn't update Qty in stock (although material is stockable) .....which is simply like immediately issue of material to cost center.
Therefore wondering why system is updating Qty for NON-VALUATED material.
Does non valuated material means , POST value to Cost center (for account assignment K) and Update Qty in stock ?
Like in case of Account Assignment , value gets charged to WBS and qty gets updated as special stock "project"
All replies are welcome .....
Regards
Shrey

By definition UNBW's are ony qty updating and have no value assoicated with them. Since the system needs to stock this qty somewhere it by deafult asks for a Sloc.

Separate GR/IR clearing account for non material

HI,
In the business, already an account is being used as GR/IR clearing account (WRX) for non material receipts (Non material means there is no material code exists in the system but at the time of PO a description is updated manually).
There are in all two plants and at present all the non material values are getting posted to the same GI/IR clearing account. The requirement is to have a separate GR/IR clearing account for both the plants.
Please note that its related to non material only and there is no material code hence no valuation class can be defaulted. Also if valuation class is kept "blank", the system allows only one entry of account.
Please let me know if any exist is available on this.
Best Regards

Hi
It can be done by defining different valuation grouping code for both the plants in OMWD. Then for the respective valuation grouping codes you can maintain different GL accounts in OBYC
Thank You,

BT HH4 Unlock for non BT ISPs

Similar Messages

Maybe you are looking for