BT Homehub 2 and ethernet connection with windows ...

If I connect my laptop using an ethernet cable and the PC goes into sleep mode when it is reactivated the router restarts. This doens't happen with a wireless connection just a wired ethernet. I have checked the properties for the ethernet adapter and can't see anything untoward there ( the power management items aren't ticked). Has anyone else had this problem and is there a fix.

sorry for late reply needed a holiday with all thge strees of default pro evo losses du to random disconects
I have a excelerator plate. Gone through prity much every step. We have just got hold of a new hub aswell due to an electrical storm blowing up the last one. its a hub 2.0 b and still the same problem
[URL=http://www.speedtest.net][IMG]http://www.speedtest.net/result/955846510.png[/IMG][/URL]
167 ms ping 1,23mb down and 0.27 mb upload
rang bt numerous times we have bought a new wirless n xbox thing change latency to fast port forwarded etc line checked rang xbox numerous times changed chanell here are the hub settings
channel 11
wpa and wpa2 incription
actual data transfer speed 130mb
ADSL line status
Connection Information
Line state
connected
Connection time
0 days, 09:25:17
Downstream
8,128 Kbps
Upstream
448 Kbps
ADSL Settings
VPI/VCI
0/38
Type
PPPoA
Modulation
G.992.1 Annex A
Latency type
Fast
Noise margin (Down/Up)
8.7 dB / 29.0 dB
Line attenuation (Down/Up)
20.0 dB / 8.5 dB
Output power (Down/Up)
12.4 dBm / 1.9 dBm
port clamping off
dynamic dns off
do you need any more info.
Thanks

Similar Messages

My ipod nano (2nd generation) will cont connect with windows or itunes, windows says it has had reported errors??? any help? havnt used ipod in over a week and now it wont work with my computer

my ipod nano (2nd generation) wont connect with windows or itunes, i used it last week (charged it through USB) then this week when i connect it (once again through USB) it wont work, it says "windows has stopped this device because it has reported problems" any help? ive made sure my itunes is up to date, done a reboot on my computer and ipod and still nothing..help please

This could either be a conflict with the iPod's docking port, the iPod's USB sync cable, or even the USB port you are plugging the iPod into on your PC. So the first thing I would try and do is plug the iPod into a different USB port on your PC. Make sure it's a high powered USB 2.0 port as they provide a higher power throughput than older USB ports or even the ones that are sometimes available on the front of the tower.
It might help to disconnected all other USB devices from the PC (minus the keyboard and mouse) and reboot the PC. Then reconnect the iPod once again.
If still no luck, swap out the cable with another known working cable to rule out the possibility of a damaged or faulty cable.
Lastly, plug the iPod into another PC to see if it's recognized there. If the same error appears on another machine, it's likely a hardware issue with the Nano meaning you'll want to have it serviced or replaced.
B-rock

I have a iPhone 5C and a PC with Windows Vista.I did pair my phone thru Bluetooth but when I try to connect I get this message:"error establishing connection" What is the reason of this?

I have a iPhone 5C and a PC with Windows Vista.I did pair my phone thru Bluetooth but when I try to connect I get this message:"error establishing connection" What is the reason of this?

Go into Settings>Messages>Send and Receive and make sure that your phone number is checked and iMessage reads as activated. Remove the checkmark from the email address and make sure that only the phone number if checked. It should appear grayed out, but should still have a checkmark. If the phone number does not have a checkmark, then turn off iMessage, wait a few moments and then turn iMessage back on and make sure that it activates.

Ethernet connection with PC

I have a Power Mac G4 with Mac 9.2.2, and a PC with windows 2000. Is there a way to connect the two with an ethernet cable? I need to transfer a file from the pc to the mac... Any ideas?

Two simple solutions.
Copy the PC file to a USB thumb drive & then transfer the thumb drive to the Mac.
eMail the file as an attachment from the PC. Then open the eMail on the Mac & download the file.
 Cheers, Tom

IPod still not connecting with windows

I recently got a replacement iPod from Apple. I connected my iPod with my computer and the "Do not disconnect." sign shows up instantly. It was there for over 20 hours so I disconnected it. I checked out the 5 step guide for Windows to recognize the iPod, but it still doesn't work. I'm using the exact same cable and USB port that I used on my old iPod. The iPod is not recognized by my PC or by iTunes. When using the iPod updater, the only option available is "restore" and I already tried that. Whenever I connect my iPod to Windows, it always says "USB device not recognized." and the iPod always goes to the "Do not disconnect." screen. Can anyone help me?

I have a similar problem, excpet that my ipod just stopped being recognised by itunes, although Windows Exploere recognises it. When I run the updater, it keeps telling me to plug in my ipod (even when it is plugged it) and both the update and restore buttons are greyed out.
No hardware has been installed since the ipod was last working properly.
I've tried everything suggested at the website... I've reset the ipod, installed, uninstalled and reinstalled the latest versions of updater and itunes repeatedly, performed restarts running only the ipod drivers using system config, nothing works. I've tried the ipod on both firewire and USB2 connections with the same result - Windows Explorer sees the ipod, but not itunes or ipod updater.
I figure the ipod needs to be restored to its factory settings, but how do I do this if the software to do so won't recognise the ipod? Is there a hardware option to do a complete restore/reset?

TS1369 why doesnt my 5th gen ipod nano not connect with windows 8?

why doesnt my 5th gen ipod nano not connect with windows 8?

Doublechecking. Have you also tried a complete uninstall of both iTunes and all the other related software components and then a reinstall? If not, try the instructions from the following document:
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8

How to make SAP B1 connection with Windows Sharepoint Service 3.0

how to make SAP B1 connection with Windows Sharepoint Service 3.0 through asp.net web part code.. I get the security error when i run that web part......
public bool ConnectToCompany()
            oCompany = new SAPbobsCOM.Company();
            oCompany.Server = "192.168.1.58";
            oCompany.DbServerType = SAPbobsCOM.BoDataServerTypes.dst_MSSQL2005;
            oCompany.CompanyDB = "SBODemoUS";
            oCompany.DbUserName = "sa";
            oCompany.DbPassword = "abc";
            //oCompany.UseTrusted = true;
            oCompany.UserName = "manager";
            oCompany.Password = "manager";
            oCompany.language = SAPbobsCOM.BoSuppLangs.ln_English;
            oCompany.LicenseServer = "192.168.1.58:30000";
            int i = oCompany.Connect();
            if (i != 0)
                return false;
            return true;
protected override void RenderContents(HtmlTextWriter writer)
            if (conn.ConnectToCompany() == true)
                writer.Write("Hello" + this.Context.User.Identity.Name);
Edited by: bikalg on Nov 28, 2010 9:43 AM

Hi.......
Welcome to SAP Business One Forum.....
Unfortunately this is the wrong forum you posted here.
I would suggest you post it in SDK or System Administration Forum and definitely you get the solution and close this thread from here......
Regards,
Rahul

My desktop IMac OSX 10.6.8 : IMovie '11: Trying to upload a home movie clip from my Panosonic camera model PV-DV203D. I've had this camera several years, and used it with Windows desktop. Now trying to work with my Mac. I have a USB cable, both ends fit,

My desktop IMac OSX 10.6.8 : IMovie '11: Trying to upload a home movie clip from my Panosonic camera model PV-DV203D. I've had this camera several years, and used it with Windows desktop. Now trying to work with my Mac. I have a USB cable, both ends fit, but iMovie '11 does not recognize it. Is there a driver fix for this?

What kind of Mac to you have? This camera is a tape based DV one that connects best with firewire and I cannot tell if your Mac has firewire. If your mac *does* have firewire, get a camcorder firewire cable and try again.
ETA: Oops, I am pretty sure that all the "desktop iMacs" have firewire, so you should be good to go. You will probably need a cord that goes from FW800 to your camcorder.

ISight - connects with windows users no problem?

I'd like to buy this webcam, but I heard it has problems connecting with windows users. Will I be able to talk to people on it through AIM? Thats what I'd like, if not, I probably wont get it. Anyone have any personal experience or have any answers or helpful tips - I'd appreciate anything - thanks.

It is not the iSight itself that gives you the impression that connecting with Micros~1 Windows users causes problems ... it is the availability of (cross platform) applications that makes connecting a bit more cumbersome.
I have PowerMac G5 with iSight and I connect with my Micros~1 Windows platform family equiped with and without USB webcam.
The challenge will be to find messaging / VoiP applications with bearable audio quality and reasonable video performance.
I started with Skype for Voice and Yahoo! messenger for bad video ( 1-2 fps and video size 320 x 240).
Skype has a video plugin (only for Windows)
Yahoo! Messenger does not have voice yet (2.5.3)
MSN is badmouthing because of the "M"
I have used iChat with another Apple believer ... and the quality of Voice and Video is unparralled.
The best two alternatives I found are:
a) AIM 5.9
b) Trillian (www.trillian.cc)
Both use a free AIM screen name.
AIM works fine, see also EZJim pages.
TrillianPro 3.1 reuses AIM screen names ... and ... it has both good audio and zoom-to-full-screen-video size with fps rates filling your bandwidth.
The only negative on Trillian so far, the "handshake" for connecting two people takes some time.
TrillianBase is free but has no Video capabilities. The Pro version is 25$.
Regards Coen
ps. if you want to test your setup use my AIM screenname: coenjeukens

X201 thinkpad won't connect with windows updates

hello,
my 6-month-old lenovo thinkpad x201 will not connect with windows updates via firefox 3.6.13 or internet explorer 7.
Machine model # CTO; Machine type # 3249 Windows XP Pro, Service Pack 3 .
i would appreciate assistance.
thanks.

how about updating to internet explorer 8?
or firefox 4?
getting microsoft updates will probably work better with internet explorer 8 though?
T430u, x301, x200T, x61T, x61, x32, x41T, x40, U160, ThinkPad Tablet 1838-22R, Z500 touch, Yoga Tab 2 Windows 8.1, Yoga Tablet 3 Pro
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
If someone helped you today, pay it forward. Help Someone Else!
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

WRT160N Won't Connect With Windows Mobile Device

I had another wireless router for years that connected almost instantly to my Windows Mobile 6.1 handheld device. I switched to the WRT160N and it works great with my wireless laptops. The device does not even show up in my available device lists on my Windows Mobile phone with wi-fi. I tried manually connecting and it does not work. I tried all of the other security settings, it does not work. The phone manufacturer (not the sevice provider which is Verizon) has acknowledged that they are having calls only about Cisco branded routers. Does anyone have a solution?

I had exactly the same problem. Tried the live technical support chat but didn't solve the problem. Resorted to random changing of settings and discovered if I changed the router setting Wireless -> Basic Wireless Settings - Network mode from 'Mixed' to 'BG-Mixed' my Windows Mobile 6.1 device found the network and happily connects with WPA2

ORA-03135 connecting with Windows 7 via VPN

Can you please help me.
I am unable to connect with Windows 7 clients (x32 also x64) to a database 10.2.0.5 running on a Windows 2008 R2 x64 Server
Oracle Client Version: 10.2.0.3
always raises an ORA-03135 error!!!
But with a Windows XP Clients (same Oracle Client Settings) its working without problems. No connections problems!
We use a SonicWall Firewall where all Traffic (SQLNET,..) is allowed for testing!
CLIENT: SQL.NET ora
SQLNET.AUTHENTICATION_SERVICES= (NONE)
NAMES.DIRECTORY_PATH= (TNSNAMES)
SERVER: SQL.NET ora
SQLNET.AUTHENTICATION_SERVICES= (NONE)
NAMES.DIRECTORY_PATH= (TNSNAMES)
Some Trace Infos:
Oracle Client:
(1256) [25-NOV-2010 11:23:38:997] ntt2err: entry
(1256) [25-NOV-2010 11:23:38:997] ntt2err: soc 1992 error - operation=5, ntresnt[0]=517, ntresnt[1]=54, ntresnt[2]=0
(1256) [25-NOV-2010 11:23:38:997] ntt2err: exit
(1256) [25-NOV-2010 11:23:38:997] nttrd: exit
(1256) [25-NOV-2010 11:23:38:997] nsprecv: error exit
(1256) [25-NOV-2010 11:23:38:997] nserror: entry
(1256) [25-NOV-2010 11:23:38:997] nserror: nsres: id=0, op=68, ns=12547, ns2=12560; nt[0]=517, nt[1]=54, nt[2]=0; ora[0]=0, ora[1]=0, ora[2]=0
(1256) [25-NOV-2010 11:23:38:997] nsrdr: error exit
(1256) [25-NOV-2010 11:23:38:997] snsbitts_ts: entry
(1256) [25-NOV-2010 11:23:38:997] snsbitts_ts: acquired the bit
(1256) [25-NOV-2010 11:23:38:997] snsbitts_ts: normal exit
(1256) [25-NOV-2010 11:23:38:998] snsbitcl_ts: entry
(1256) [25-NOV-2010 11:23:38:998] snsbitcl_ts: normal exit
(1256) [25-NOV-2010 11:23:38:998] snsbitts_ts: entry
(1256) [25-NOV-2010 11:23:38:998] snsbitts_ts: acquired the bit
(1256) [25-NOV-2010 11:23:38:998] snsbitts_ts: normal exit
(1256) [25-NOV-2010 11:23:38:998] nsdo: nsctxrnk=0
(1256) [25-NOV-2010 11:23:38:998] snsbitcl_ts: entry
(1256) [25-NOV-2010 11:23:38:998] snsbitcl_ts: normal exit
(1256) [25-NOV-2010 11:23:38:998] nsdo: error exit
(1256) [25-NOV-2010 11:23:38:998] nioqrc: wanted 1 got 0, type 0
(1256) [25-NOV-2010 11:23:38:998] nioqper: error from nioqrc
(1256) [25-NOV-2010 11:23:38:998] nioqper: ns main err code: 12547
(1256) [25-NOV-2010 11:23:38:998] nioqper: ns (2) err code: 12560
(1256) [25-NOV-2010 11:23:38:998] nioqper: nt main err code: 517
(1256) [25-NOV-2010 11:23:38:998] nioqper: nt (2) err code: 54
(1256) [25-NOV-2010 11:23:38:998] nioqper: nt OS err code: 0
(1256) [25-NOV-2010 11:23:38:998] nioqer: entry
(1256) [25-NOV-2010 11:23:38:998] nioqer: incoming err = 12151
(1256) [25-NOV-2010 11:23:38:998] nioqce: entry
(1256) [25-NOV-2010 11:23:38:998] nioqce: exit
(1256) [25-NOV-2010 11:23:38:998] nioqer: returning err = 3135
(1256) [25-NOV-2010 11:23:38:998] nioqer: exit
(1256) [25-NOV-2010 11:23:38:998] nioqrc: exit
(1256) [25-NOV-2010 11:23:38:998] nioqds: entry
(1256) [25-NOV-2010 11:23:38:998] nioqds: disconnecting...
(1256) [25-NOV-2010 11:23:38:999] nsclose: entry
Server Traces:
nttrd: socket 4172 had bytes read=0
nttrd: exit
nsprecv: error exit
nserror: entry
nserror: nsres: id=0, op=68, ns=12535, ns2=12560; nt[0]=505, nt[1]=60, nt[2]=0; ora[0]=0, ora[1]=0, ora[2]=0
nsrdr: error exit
nsdo: nsctxrnk=0
nsdo: error exit
nioqrc: wanted 1 got 0, type 0
nioqper: error from nioqrc
nioqper: ns main err code: 12535
nioqper: ns (2) err code: 12560
nioqper: nt main err code: 505
nioqper: nt (2) err code: 60
nioqper: nt OS err code: 0
nioqer: entry
nioqer: incoming err = 12151
Server SQLnet.LOG
Fatal NI connect error 12170.
VERSION INFORMATION:
     TNS for 64-bit Windows: Version 10.2.0.5.0 - Production
     Oracle Bequeath NT Protocol Adapter for 64-bit Windows: Version 10.2.0.5.0 - Production
     Windows NT TCP/IP NT Protocol Adapter for 64-bit Windows: Version 10.2.0.5.0 - Production
Tns error struct:
ns main err code: 12535
TNS-12535: TNS:operation timed out
ns secondary err code: 12560
nt main err code: 505
TNS-00505: Operation timed out
nt secondary err code: 60
nt OS err code: 0
Thx

always raises an ORA-03135 error!!!
Server SQLnet.LOG
Fatal NI connect error 12170.
VERSION INFORMATION:
     TNS for 64-bit Windows: Version 10.2.0.5.0 - Production
     Oracle Bequeath NT Protocol Adapter for 64-bit Windows: Version 10.2.0.5.0 - Production
     Windows NT TCP/IP NT Protocol Adapter for 64-bit Windows: Version 10.2.0.5.0 - Production
Tns error struct:
ns main err code: 12535
TNS-12535: TNS:operation timed out
ns secondary err code: 12560
nt main err code: 505
TNS-00505: Operation timed out
nt secondary err code: 60
nt OS err code: 0
ThxThis is network related problem,may be network very slow.When error occur then execute tnsping <netservicename> command and see that happen.

Password for ethernet, connecting with AirPort Express?!

I live in a student-house, and normally connects with a cable to the wall (ethernet). I´ve got a password from the University where I study, and have to use this to connect with the ethernet.
My question; Can I place the ethernet-cable into the AirPort Extreme, and make it work on my mac, even though there´s a password? (can I type in this password somewhere during the installation?)
I´m no good at this, and I´m really really tired of having to use the cable on my mackbook....

Okey, than I wont try no more...
Thank you so much!!

Wireless and Ethernet connection for U330 not working - Help

I need help with my wireless and ethernet connection for the U330 notebook. I can not connect to the internet since I received my U330 and if I try to connect to a wireless router, it knocks other users off. I called customer service already and they asked me to download the driver on the Lenovo Downloads and Drivers page. The page can not be found when you try to download the drive so I was not sure if there is another place I can download it since customer service mentioned that they will send me a disk which will take some time. Thanks in advance.

Your router may be knocking you due to lots of facts. Those Ensteins suggested drivers reinstall because that's the only thing they know.
Try changing your encryption mode, try adding your laptop's WiFi MAC-adress of whitelist of Route, try disabling firewall, try increase strength of signal.
Driver is located at consumersupport.lenovo.com - do not hesitate to check.
//help will save the world

Can i use a thunderbolt display for my macbook pro and hp laptop with windows 7 and what adapters will i need

Can i use a thunderbolt display for my macbook pro and hp laptop with windows 7 and what adapters will i need

Hi jayhrab,
Currently, the system requirements listed for an Apple Thunderbolt Display are:
Thunderbolt-enabled Mac computer, including MacBook Air, MacBook Pro, Mac mini, and iMac
OS X v10.6.8 or later
Apple - Thunderbolt Display - Read the tech specs.
Regards,
- Brenden

BT Homehub 2 and ethernet connection with windows ...

Similar Messages

Maybe you are looking for