BT HomeHub2 connection lost with iPhone- BTFON rel...

Hi
I have a laptop that connects very happily with a BT HomeHub 2.
I also have an iPhone 3GS that does the same. 
However, I recently downloaded the BTOFN app on the phone and used the OpenZone a few times.
On the phone, there is now no listing at all for my BT HomeHub under WiFi Settings. It has totally disappeared. I can still connect to BTFON networks sporadically.
Other people have had similar problems following downloading the BTFON app, but always their HomeHub still appears on the list of WiFi networks on the phone.
I have tried:
- switching the phone on and off. The HomeHub fails to appears on the Wi-Fi list.
- on the phone, under Settings\Wi-Fi\Othe to set up another network and typed in the wireless network name and the wireless key, using WEP Security setting. I get the message 'Could not find the network 'BTHomeHub2-xxxx'. 
- on the phone, under Settings\Wi-Fi\Other to set up another network and typed in the wireless network name and the wireless key, using WAP Security setting. I get the message 'Failed to join BTHomeHub2-xxxx'. 
- deleting BTFON app on phone. The HomeHub fails to appears on the Wi-Fi list.
I have recently upgraded the software on the phone to 5.1.
(I assume that when I'm setting up a new WiFi network on the phone under Settings\Wi-Fi\Other, the password asked for is the Wireless Key? Or is it another password?)
Any help would be much appreciated.
Solved!
Go to Solution.

This thread may help http://community.bt.com/t5/BB-Speed-Connection-Issues/iPhone-4/m-p/42430/highlight/true#M25596
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

Similar Messages

  • Is there a fix for the connectivity problems with iPhone 5S and ISO 7.0.2?

    Is there a fix for the bluetooth connectivity problems with iPhone 5S and ISO 7.0.4?
    I am having problems connecting the BT Audio and the handsfree phone connectyion is unreliable in 2012 Mitsubishi Lancer XL.
    All worked OK with ISO 6.

    Hello CraigNicholson
    You would need to sync with iTunes to get that process to work for you. Check out the article below for more information on how to resolve that issue to get the proper token to use Push Notifications again.
    iPad and iPod touch: Unable to use YouTube or Push notifications
    http://support.apple.com/kb/ts3305
    Regards,
    -Norm G.

  • My Sennheiser MM550-x connected perfectly with iPhone 4s.  It does not connect with iPhone 5s bluetoth.  Ayone else with this problem?

    My Sennheiser MM550-x connected perfectly with iPhone 4s.  It does not connect with iPhone 5s bluetoth.  Ayone else with this problem?

    Hey araho!
    Here is an article for you that will help you troubleshoot this Bluetooth issue:
    iOS: Troubleshooting Bluetooth connections
    http://support.apple.com/kb/TS4562
    Thanks for using the Apple Support Communities. Have a good one!
    -Braden

  • Connection Lost with keyboard

    My PPC iMac G5 keeps saying "connection lost" with a keyboard displayed. The keyboard has new batteries, is paired, and connected. When this occurs no key on the keyboard will work. I can occasionally go to a text editor and get keys to work and then it's OK for a couple of minutes, then "connection lost" again. Does anyone have any thought as to what the problem might be?

    Same problem here..
    I have a Imac 27 also, OSX 10.6.7
    The imac is about a year old..
    Everything worked perfektly untill the FIRST BATTERY CHANGE.. (about 5 months after imac was bought )
    the keyboard and the magic mouse is making a really hard time for me to do my work...
    however, i had this issue for a while now, and apple dont wanna do anything about it..
    butthe stranges thing is that,.. for about 3 months ago the magic mousestop doing the connection lost thingi..and works perfectly as normal..(strange)
    and now only the keyboard is doing it  (batteries in keyboard and mouse allways 100% when i talk about this issue)
    so.. bougth an Imac.. everything worked fine.. after 5 months keyboard and mouse starting to flipout..
    and about 4 months after that the mouse is fine but keyboard is till flipping out! ( without me making any changes )
    Still apple dont seem to care about this...
    However i recomend "The Lightbulb conspirisey" - Docymentry film.
    It is clear to me that apple is still using PLANED OBSOLESENS in there products,,
    and they have no intrest in making sustainable products...
    Making economic profit is way more relevent on apples agenda then making sustainable products..
    I thought i was paying alot of EXTRA money for the apple products to get the perfection i need..
    But noo, they are just masking the usual "PLANED OBSOLESENS" wich is a KEY ingrediens for expanding industries.
    And i am very sad that apple dont give a F**** about atcually caring about people. rather then screwing them over...

  • HT1212 how to connect iTune with iPhone 5s

    I want to know how to sync iTune with iPhone 5s.   In other words myiPhone is locked out and I cannot open without connecting it with iTune. That s the
    message my phone is giving m

    Try reading the article you linked from...

  • HT1430 how to connect iTune with iPhone 5s

    I want to know how to sync iTune with iPhone 5s.   In other words myiPhone is locked out and I cannot open without connecting it with iTune. That s the
    message my phone is giving me. Thanks

    connect phone to computer
    launch itunes
    follow the prompts.

  • IOS 6 wifi connectivity problem with iPhone 4s

    After recently updating both my iPad 3 and iPhone 4S to iOS 6, I began to have problems with my wifi connection on my iPhone. When trying to connect to my home wifi, the iPhone seems to connect but then brings up the "Log In" screen with an Apple website loaded saying the page cannot be found. However my iPad, again also recently updated to iOS 6, has no problem connecting to wifi. Has anyone else experienced this conflict and is Apple working to correct this? My router is a standard U-Verse "2 wire" device. I have performed all the quick fixes I could think of such as restarting the router, restarting my phone etc. please help!

    I have a similar fault with my Lexus ct200h fsport, updated to ios 8.1.1 on my iphone4s 64, and the bluetooth sometimes disconnects during calls then re-connects again (by this time the person on the end has hung up)  .but bluetooth audio works fine. very frustrating!!

  • Anyone noted Bluetooth connection issues with iPhone 4s and Ford sync?

    My wifes iPhone 4 with IOS 5.0.1 auto connects to Ford Sync at least 75% of the time on first attempt. My new iPhone 4S with IOS 5.0.1 takes 4-5 attempts and rarely if ever connects without multiple attempts. Any one else seeing issues with failed Bluetooth connections with iPhone 4S phones?

    Look at the right panel for links to other threads concerning problems with Fords. And it's not just Fords, cars in general.  No solutions seem to be given.

  • Connectivity issue with iPhone 3GS and Time capsule 7.6.1

    I've upgraded the firmware of my Time Capsule. Now i have WiFi connectivity problems with my iPhone 3GS. My iMac and two iPads (version 1 & 2) are doing fine.
    Very strange in this situation is when I at a rare moments are able to connect my iphone to the wifi my iPad2 connection falls out. But after a minute or 2 the system disconnects my iphone and reconnect my ipad.
    For info: I'm using an iMac 27" 3.4 Intel Core i7 with Mac OS 10.7.3 - all software is updated.
    Thanks for reaction
    Stephan

    The iphone is very sensitive to channel selection..
    Open the airport utility manual settings.. Go to the wireless.. change its name to something simple without spaces.. TC24 would do nicely.
    Set the wireless to b/g a/n so it works with everything .. not auto.
    And set the channels manually.. 2.4ghz (which iphone uses) set channel to either 1, 6, 11.. these are the only channels that do not overlap..
    Try and see if the iphone connects..
    Set security.. WPA2 personal and put in a suitable key.. pure alphanumeric no spaces.

  • Bluetooth connectivity degrading with iPhone 4

    The bluetooth connection to my iPhone 4 has become weak and unreliable over the past week. I use a Sony DR-BT 160AS stereo headset that has been very reliable up until recently. I am having the same intermittent connectivity issue with my Plantronics Voyager PRO, so it seems to indicate the problem is with the iPhone. The connection is good if I have the phone in my hand, but as soon as I try to snap it into my Otter Box belt clip, the sound breaks up, cuts out, and eventually disconnects. I tested this by cupping my hand over the phone and the same problem occurs, indicating a signal send/receive weakness. Any ideas why this would have changed? I have been able to listen to music with the phone on the belt clip since I bought this phone a year ago.

    I don't know why this is happening, but I may have found the solution. I leave my iPhone powered on almost constantly. I powered of and back on again and the bluetooth connectivity has been restored to its former strength.

  • Connection lost with DKU-2 USB cable for 6230

    I got tired of trying to solve connectivity problems
    with the bluetooth device and bought a new cable.
    It seems that neither the Bluetooth or the Cable can transfer more than a few MegaBytes in one shot ("Connection to mobile phone lost").
    I have upgraded to the newest 6230 firmware (05.35).
    I'm Running Windows XP Home Edition SP2.
    I don't think this is a PcSuite problem since this
    error accurs when I use the usb drivers too.
    Suggestions?
    Thank you.

    Hi onearmfrog
    Did you let PC Suite 6.83 update over 6.82 or did you uninstall it and Nokia Connectivity Driver first? I think remnants are left behind unless it is done manually and PC Suite Cleaner is used to clean up computer first.
    Happy to have helped forum in a small way with a Support Ratio = 37.0

  • Connecting problems with iphone after a closed connection with a Mac

    Hi!
    I have set up 4 ssl vpn  with different shared keys. The connection with each Mac via Securitas is working fine. Additinaly I have set up a ssl vpn for an iPhone iOS4. If the SA 540 is rebooted I can connect to the SA with the iphone without any problems, one tine, two times...
    But after I had closed a vpn-Mac-connection it is not possible to connect with the iphone again: the shared key is not correct. In this case the iphone tried to connect with its own shared key - a different one to the Mac connection.
    So I set all shared keys to the same. After reboot of the SA the connection of the iphone works well. After a running or closed Mac connection the iphone could not connect to the SA: Error: communication with VPN-Server failed.
    So it is not possible to connect with an iphone and an ssl client at the same time. The iphone can only make a connection after a long time again.
    Has anybody a solution for that issue?
    The latest firmware is installed.
    Thanks a lot!
    Jens

    This is a normal behavior when NAT-T is not enabled. Without NAT-T, the firewall cannot PAT ESP packets because there is no port (UDP or TCP) in the packet. Hence, every packet leaving the WAN interface has the same source address and no source port by which the return traffic can be identified and translated back to the inside address. With NAT-T enabled, the packet is encapsulated in UDP before being translated by NAT; therefore, each IPSec host on the inside of the firewall gets a unique PAT'ed source UDP port after the PAT is peformed and before the packet is sent out of the WAN interface; hence, when the return traffic arrives in the WAN interface, the firewall knows which PAT rule to use to send the return traffic back to the host on the inside of the firewall that originated the IPSec VPN connection.
    Therefore, with NAT-T disabled, only one host behind a PAT firewall/router can establish an IPSec VPN tunnel to a host on the Internet at one time.
    Besides the requirement of having NAT-T enabled for multiple hosts to be able to establish an IPSec VPN tunnel from behind a PAT firewall/router, you should also make sure that there's a firewall rule applied inbound on the WAN interface that allows UDP 4500; otherwise, NAT-T will not work. NAT-T uses UDP 4500 for IKE negotiations. Without NAT-T, IKE uses UDP 500.

  • Internet connection lost with wired connection in hotel

    I am in a NYC Hotel and was able to get an Internet connection on my MacBook (2 ghz intel core duo running 10.5.8) via the wifi network with extremely slow connection speed. They also offer Ethernet connection from the room so I tried that and got a very good connection upon restart. I was downloading content from the iTunes store and the connection was interrupted - Internet connection was lost. I tried redrafting again several times but to no avail. I went into network preferences and tried automatic location along with several others I have set up but cannot get it to re-connect. Built-in Ethernet is shown as connected and diagnostics shows Ethernet and network settings in green but ISP Internet and server are red. It configured using DHCP and IP address is 192.168.xx.xxx with subnet mask and router showing addresses as well. DNS Server is identical to IP address and Search Domains says "stayonline.net"
    I have 2 other Ethernet connections showing on my locations that I believe are related to Parallels (some say Parallels Host-Guest & Parallels NAT and the others say Ethernet Adaptor (en2) & Ethernet Adaptor (en3)). I have tried making them inactive and re-starting but again to no avail. I don't know much about networking and just want to get my Internet connection working while I'm here. I am sending this from my iPhone and would appreciate any help you all can provide. Thanks,
    Allan

    Sorry I meant restarting not redrafting (iPhone apparently doesn't like the word restart and changed it for me!)

  • Connecting Problems with iPhone and iTunes. Help please?

    When I connect my iPhone 4 to my laptop (Toshiba), I have a huge issue with connecting and syncing my phone on iTunes. During the time it is plugged and attached to my laptop, I can charge it and sync photos that are on my device to the compter, but I can not get it to sync with iTunes. Also, I do not know what my iTunes is fuctioning at (6.1- 7.1- 8.etc), but I did updated it about a month ago. Does anyone have any information and /or/ helpful advice on this topic?
    Thank you!

    Hi CookiCat,
    Follow the troubleshooting steps in the link below:
    http://support.apple.com/kb/TS1538
    Cheers,
    GB

  • Connecting iMac with iPhone 3GS

    I'm having trouble getting my iMac to connect with my iPhone 3GS. Neither will even recognize the other. Can someone help?
    Thank you!

    Same problem here with an iPhone 3G and iMac and iBook.
    Not living in US I am indeed able to Tethering Internet with Bluetooth. At least I suppose, because my iPhone asked for it few time but I never did it.
    I feel frustrating if the function of Bluetooth on an iPhone is locked to do that only.
    Then I would say Bluetooth is much more easy to use for a short document transfer (like a single picture) then Sync which has anyway an other goal.
    I find the Sync function via iTunes far from satisfactorily. It still impossible a.e to choose a direction for the Sync function. In consequences, most of the time, some data will be erased though you want to keep it too.
    By putting unjustified limits Apple encourage the jailbreak.

Maybe you are looking for