BT Infinity and TP-LINK TD-W8980
Hello all,
I have recently purchased a TP-LINK W8980 router and I am having issues replacing my BT Home Hub with it.
Could anyone please help me with the configuration? Or better yet has anyone else got this router working on a BT Infinity connection.
I spoke to support and I used the details they provided me for the settings for the WAN connection and they just do not seem to work.
Thank you,
Antony.
Solved!
Go to Solution.
captainqwerty wrote:
Currently doing the things you suggested I had some of that configured how you said but not all.
I need to walk the dog going to try what has been mentioned here then will get back to you.
Do I use the username
[email protected]
or
[email protected]
Either, the part before '@btbroadband' can be anything.
Thank you for your help by the way this is very much apprechiated.
Similar Messages
-
Whole block can get infinity and I can't...
I have just signed up to BT standard broadband and am hoping to possibly upgrade to fibre in the near future. I have tried calling BT however they say I can’t get fibre due to them entering in the phone number and saying it is unavailable.
When I check the availability of fibre using my address it says it is available to me, however when I enter my phone number it says it isn’t.
All my neighbours can get infinity and I can’t, please don’t say it is down to routing as I can’t be the only flat in a nine story building that can’t get it.
They are all connected to the same cabinet and exchange as me. Front door is less than 2 metres away from mine. Please see just one example below.
Can someone please help.
ThanksHi Darren1515
I can see one of my colleagues is chasing this for you.
I'll get you contacted with an update it may be tomorrow but I will have you updated.
Thanks
Stuart
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry that we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-) -
Hi all,
Our local exchange was updated to 21CN earlier this year, and I was originally told (by BT) that after a possible hour of down-time, my connection speed should go to the maximum supported speed. I had to call BT to find this information out, there wasn't any communication to say the exhange was being updated or there'd be a change in connection speed.
A couple of days ago, we had some marketing through the post about BT Infinity and the super-fast broadband speeds of upto 40mb.
I called BT to ask if we could be upgraded to Infinity, but was told it's not available till March 2012.
I was wondering, if the exchange was updated back in March/April this year, why cant I make use of the 21CN until next year? If I go onto BT's site to sign up as a new customer, it shows 12mb - 20mb as a possible connection speed (currently connecting at just over 8mb, and always have done since broadband was available). Other ISP's show the same possible connection speed.
I did think it could be the router, but I'm still using the HomeHub (v2) and the exchange is about 5min walk from the house.Try entering your telephone number (for most accurate result) into https://www.btwholesale.com/includes/adsl/main.html
To confirm the estimate the line could achieve.
If your on ADSL go into your router stats and look for the connection type
I was on the basic ADSL upto 8Mb (G.992.1) I contacted BT See THIS THREAD.
They put me onG.992.3 (ADSL2) with the hope the exchange would after a period of "training" then automatically move me toG.992.5 (ADSL2+).
However in my case due the long line length the change to ADSL2 did not increase my speed.... and therefore the exchange did not automatically move me up any further.
If the Checker shows you could achieve the 20Mb speeds then you could try as I did and ask the forum mods if they can get you changed up.
Infinity (Fibre service) is not related to 21CN.
SamKnows for example or BT Openreach may show your exchange now has infinity but the important thing is your Primary Connect Point (small local green cabinet) has to have a larger cabinet installed next to/nearby and yours looks to be scheduled to be Ready For Service in a few months time.
Keep using the checkers.... Mine was showing 30th Sept then on the 1st July Infinity became available.... but be aware it can go the other way... especially if the bloomin' snow arrives.
Picture of a small green cabinet (far right) with a typical Fibre Cabinet nearby with it's cooling vents
When the new Fibre cab is powered up you can easily hear the fans running, indicating that it may be Ready For Service or soon to be.
Please Click On any Text in Blue as that automatically links to information.
PC (NDEGR) -
Hi,
I am a noob to BT Infinity and wanted to see if the following is possible. Can you please let me know if this is feasible or just my aspiration gone too far?
1. I have a Linksys WRT610N router that I want to use for my wireless within the house
2. I have a Netgear switch in the loft
3. The house is CAT6 cabled
Can I
1. Have the Openreach modem that comes with BT infinity installed in the loft(with the master socket) next to the switch
2. connect the LAN1 of the OR modem into my switch
3. Connect the Linksys router(in the WAN port??) to the LAN (on the ground floor) via the installed LAN socket (which goes to the switch in the loft)
will this work? please advise.
regardsabjt wrote:
Hi,
I am a noob to BT Infinity and wanted to see if the following is possible. Can you please let me know if this is feasible or just my aspiration gone too far?
1. I have a Linksys WRT610N router that I want to use for my wireless within the house
2. I have a Netgear switch in the loft
3. The house is CAT6 cabled
Can I
1. Have the Openreach modem that comes with BT infinity installed in the loft(with the master socket) next to the switch
2. connect the LAN1 of the OR modem into my switch
3. Connect the Linksys router(in the WAN port??) to the LAN (on the ground floor) via the installed LAN socket (which goes to the switch in the loft)
will this work? please advise.
regards
You have almost the exact same setup as me already exept I have CAT6a cabling. The way I have set it up is have the router downstairs where the master socket is, feed a CAT5,5e,6,6a cable into the loft to the switch (Infinity's maximum throughput is less that 40mbps and even CAT5 cables can handle 100mbps speeds). From the Switch I have my WAPS (Wireless Access Points) plugged in (1 HomeHub v1 plugged into a v2 which is linked to the switch).
As well as having the switch in the loft, I have 2 servers which never overheat. See below for a diagram if you want to see how I did mine:
To connect a router to a home network, all you would have to do is connect a switch to one of the ports located on the back of the router where you would usually plug computers in.
I hope this helps
Like this post? Give it a Star . If this post answers your question, please Mark it as the Accepted Solution. -
Home Hub 5 firewall rules and TP Link routers
I am not yet a BT customer but am looking to sign up for Infinity and I understand I will get a Home Hub 5 unit ... however I would prefer to use my TP-Link AC1750 which has proven to be excellent with it's WIFI signal. My TP-Link is a cable version, not the ADSL version.
I understand the HomeHub 5 now contains the VDSL modem built in (rather than separate) so I suspect I'll need to hang my TP-Link off one of the HomeHub 5 Gbe ports and disable Wireless on the Home Hub. Has anyone tried this? Do you know if the firewall rules can be set to put my TP Link in a "DMZ" , i.e. no firewall protection, because I'd prefer to do that as my TP Link is a router/firewall combined and it will make it easier for getting my VPN ports working etc.
Alternatively do you know if the cable you would normally plug into the HomeHub5 "Broadband WAN" plug is just straightforward Gbe, i.e so I can put it straight into my TP Link and not use the HomeHub 5 at all?
Thanks
Solved!
Go to Solution.Keith,
Thanks very much for your reply. So I can't use the HomeHub 5 as a cable modem, but do you know what kind of broadband/WAN connection BT OpenReach provide that goes into the HomeHub? Is that straight-forward Gbe that I could probably plug into my TP Link, as it's designed to take a Gbe connection? (Currently it is connected into one of the LAN ports of my ADSL router/modem/firewall device as I'm still on ADSL but was planning my upgrade to Infinity)
Alternatively, I could connect my TP Link into one of the Home Hub 5 LAN ports, so long as I can designate that port as a DMZ port (i.e. no firewall protection) so that my TP Link will be the only one controlling the firewall rules. Is it possible to make one port, or one device a DMZ device on the Home Hub 5?
Thanks -
Why text and button links on a PDF do not work in the iPad
I have Acrobat Pro 9.2.3 and InDesign CS5.
I've tried creating both button and text links directly from InDesign (Window > Interactive > Hyperlinks). I then export the multi-page PDF with "Acrobat 6 and Above" selected as well as the "Hyperlinks" and "Interactive Elements" checked. When I open the PDF in my iPad, none of the text or button links work.
Then . . .
I tried opening the same multi-page PDF in Acrobat Pro, and manually created the link boxes (Tools > Advanced Editing > Link Tool). The iPad still can't interprete these two interactive elements.
Any clues what I'm doing wrong?Try exporting as ePub - now test inside Digital Editions and if OK - drag the file into iTunes and synch to iPhone/iPad.
It's probably a Preview issue as mentioned but exporting to ePub is good fun!
J. -
How to display URL images and URL link (html) from Smartforms?
Hi Gurus,
I'm having difficulty on how to display targeted URL images and URL link from the smartforms, after i sending it out as html mail. The mail i sent just can be preview as a plain text, which can't execute the html code that i put inside the smartforms itself. I follow a few step from this very useful blog.. Hopefully, you guys can give me some solutions or ideas on this.
/people/pavan.bayyapu/blog/2005/08/30/sending-html-email-from-sap-crmerp -thanks to Pavan for his useful blog.
My code is like this..
<--- Start Code.
FORM call_smartforms.
DATA : lv_subject TYPE so_obj_des,
lc_true(1) VALUE 'X',
lw_control_parameters TYPE ssfctrlop,
lw_output_options TYPE ssfcompop,
lc_graphics(8) VALUE 'GRAPHICS',
lw_xsfparam_line TYPE ssfxsfp,
lc_extract(7) VALUE 'EXTRACT',
lc_graphics_directory(18) VALUE 'GRAPHICS-DIRECTORY',
lc_mygraphics(11) VALUE 'mygraphics/',
lc_content_id(10) VALUE 'CONTENT-ID',
lc_enable(6) VALUE 'ENABLE',
lw_job_output_info TYPE ssfcrescl,
lw_html_data TYPE trfresult,
lw_graphics TYPE ssf_xsf_gr,
lt_graphics TYPE tsf_xsf_gr,
lv_html_xstr TYPE xstring,
lw_html_raw LIKE LINE OF lw_html_data-content,
lv_incode TYPE tcp00-cpcodepage VALUE '4110',
lv_html_str TYPE string,
lv_html_len TYPE i,
lc_utf8(5) VALUE 'utf-8',
lc_latin1(6) VALUE 'latin1',
lv_offset TYPE i,
lv_length TYPE i,
lv_diff TYPE i,
lt_soli TYPE soli_tab,
lw_soli TYPE soli,
lc_mime_helper TYPE REF TO cl_gbt_multirelated_service,
lv_name TYPE mime_text VALUE 'sapwebform.htm',
lv_xstr TYPE xstring,
lw_raw TYPE bapiconten,
lt_solix TYPE solix_tab,
lw_solix TYPE solix,
lv_filename TYPE string,
lv_content_id TYPE string,
lv_content_type TYPE w3conttype,
lv_obj_len TYPE so_obj_len,
lv_bmp TYPE so_fileext VALUE 'BMP',
lv_description TYPE so_obj_des VALUE 'Graphic in BMP format',
lc_doc_bcs TYPE REF TO cl_document_bcs,
lc_bcs TYPE REF TO cl_bcs,
lc_send_exception TYPE REF TO cx_root,
lw_adsmtp TYPE lty_adsmtp,
lv_mail_address TYPE ad_smtpadr,
lc_recipient TYPE REF TO if_recipient_bcs,
lc_send_request TYPE REF TO cl_bcs,
lv_sent_to_all TYPE os_boolean.
DATA : v_language TYPE sflangu VALUE 'E',
v_e_devtype TYPE rspoptype.
v_form_name = 'ZTEST_EMAIL'.
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
formname = v_form_name
IMPORTING
fm_name = v_namef
EXCEPTIONS
no_form = 1
no_function_module = 2
OTHERS = 3.
IF sy-subrc = 0.
break mhusin.
ENDIF.
starting here. ***
Set title for the output
lv_subject = 'Smartforms.'.
Set control parameters to "no dialog"
lw_control_parameters-no_dialog = lc_true.
IF lw_service_subject-code = lc_fm1.
*--- To get output device type
CALL FUNCTION 'SSF_GET_DEVICE_TYPE'
EXPORTING
i_language = v_language
i_application = 'SAPDEFAULT'
IMPORTING
e_devtype = v_e_devtype.
lw_output_options-tdprinter = v_e_devtype.
lw_control_parameters-getotf = 'X'.
IF sy-subrc = 0.
break mhusin.
ENDIF.
Set output options
lw_output_options-xsf = lc_true.
lw_output_options-xsfcmode = lc_true.
lw_output_options-xsfoutmode = 'A'.
lw_output_options-xsfoutdev = space.
lw_output_options-xsfformat = lc_true.
lw_xsfparam_line-name = lc_graphics.
lw_xsfparam_line-value = lc_extract.
APPEND lw_xsfparam_line TO lw_output_options-xsfpars.
lw_xsfparam_line-name = lc_graphics_directory.
lw_xsfparam_line-value = lc_mygraphics.
APPEND lw_xsfparam_line TO lw_output_options-xsfpars.
lw_xsfparam_line-name = lc_content_id.
lw_xsfparam_line-value = lc_enable.
APPEND lw_xsfparam_line TO lw_output_options-xsfpars.
Get the smartform content
CALL FUNCTION v_namef
EXPORTING
control_parameters = lw_control_parameters
output_options = lw_output_options
*pass other application specific parameters (eg order number, items ).
IMPORTING
job_output_info = lw_job_output_info
TABLES
tt_tabh = tt_tabh
tt_tabb = tt_tabb
tt_tabf = tt_tabf
EXCEPTIONS
formatting_error = 1
internal_error = 2
send_error = 3
user_canceled = 4
OTHERS = 5.
IF sy-subrc = 0.
break mhusin.
ENDIF.
lw_html_data = lw_job_output_info-xmloutput-trfresult.
lt_graphics[] = lw_job_output_info-xmloutput-xsfgr[].
CLEAR lv_html_xstr.
LOOP AT lw_html_data-content INTO lw_html_raw.
CONCATENATE lv_html_xstr lw_html_raw INTO lv_html_xstr IN BYTE MODE.
ENDLOOP.
lv_html_xstr = lv_html_xstr(lw_html_data-length).
CALL FUNCTION 'SCP_TRANSLATE_CHARS'
EXPORTING
inbuff = lv_html_xstr
incode = lv_incode
csubst = lc_true
substc_space = lc_true
IMPORTING
outbuff = lv_html_str
outused = lv_html_len
EXCEPTIONS
OTHERS = 1.
*HACK THE HTML CODE GENERATED BY SMARTFORM TO MAKE THE
*EXTERNAL IMAGES APPEAR AS <IMG> TAG IN HTML
REPLACE ALL OCCURRENCES OF '<IMG' IN lv_html_str WITH '<IMG' IGNORING CASE.
REPLACE ALL OCCURRENCES OF '/>' IN lv_html_str WITH '/>' IGNORING CASE.
REPLACE ALL OCCURRENCES OF '</A>' IN lv_html_str WITH '' IGNORING CASE.
REPLACE ALL OCCURRENCES OF '<' IN lv_html_str WITH '<' IGNORING CASE.
REPLACE ALL OCCURRENCES OF '>' IN lv_html_str WITH '>' IGNORING CASE.
CALL METHOD html_control - >load_mime_object
EXPORTING
object_id = 'ZWN'
object_url = 'ZWN.GIF'
EXCEPTIONS
OTHERS = 1.
REPLACE ALL OCCURRENCES OF lc_utf8 IN lv_html_str WITH lc_latin1.
REPLACE ALL OCCURRENCES OF lc_utf8 IN lv_html_str WITH 'iso-8859-1'.
break mhusin.
lv_html_len = STRLEN( lv_html_str ).
lv_offset = 0.
lv_length = 255.
WHILE lv_offset < lv_html_len.
lv_diff = lv_html_len - lv_offset.
IF lv_diff > lv_length.
lw_soli-line = lv_html_str+lv_offset(lv_length).
ELSE.
lw_soli-line = lv_html_str+lv_offset(lv_diff).
ENDIF.
APPEND lw_soli TO lt_soli.
ADD lv_length TO lv_offset.
ENDWHILE.
CREATE OBJECT lc_mime_helper.
CALL METHOD lc_mime_helper->set_main_html
EXPORTING
content = lt_soli
filename = lv_name
description = lv_subject.
LOOP AT lt_graphics INTO lw_graphics.
CLEAR lv_xstr.
LOOP AT lw_graphics-content INTO lw_raw.
CONCATENATE lv_xstr lw_raw-line INTO lv_xstr IN BYTE MODE.
ENDLOOP.
lv_xstr = lv_xstr(lw_graphics-length).
lv_offset = 0.
lv_length = 255.
CLEAR lt_solix[].
WHILE lv_offset < lw_graphics-length.
lv_diff = lw_graphics-length - lv_offset.
IF lv_diff > lv_length.
lw_solix-line = lv_xstr+lv_offset(lv_length).
ELSE.
lw_solix-line = lv_xstr+lv_offset(lv_diff).
ENDIF.
APPEND lw_solix TO lt_solix.
ADD lv_length TO lv_offset.
ENDWHILE.
CONCATENATE lc_mygraphics lw_graphics-graphics text-001 INTO lv_filename.
CONCATENATE lc_mygraphics lw_graphics-graphics text-001 INTO lv_content_id.
lv_content_type = lw_graphics-httptype.
lv_obj_len = lw_graphics-length.
*Add images to the email
CALL METHOD lc_mime_helper->add_binary_part
EXPORTING
content = lt_solix
filename = lv_filename
extension = lv_bmp
description = lv_description
content_type = lv_content_type
length = lv_obj_len
content_id = lv_content_id.
ENDLOOP.
TRY.
lv_subject = lv_subject.
lc_doc_bcs = cl_document_bcs=>create_from_multirelated(
i_subject = lv_subject
i_multirel_service = lc_mime_helper ).
CATCH cx_document_bcs INTO lc_send_exception.
CATCH cx_bcom_mime INTO lc_send_exception.
CATCH cx_gbt_mime INTO lc_send_exception.
ENDTRY.
Create send request
TRY.
lc_bcs = cl_bcs=>create_persistent( ).
CATCH cx_send_req_bcs INTO lc_send_exception.
ENDTRY.
TRY.
lc_bcs->set_document( i_document = lc_doc_bcs ).
CATCH cx_send_req_bcs INTO lc_send_exception.
ENDTRY.
Set-up email receiver
lv_mail_address = '[email protected]'.
TRANSLATE lv_mail_address TO UPPER CASE.
TRY.
lc_recipient = cl_cam_address_bcs=>create_internet_address(
i_address_string = lv_mail_address ).
CATCH cx_address_bcs INTO lc_send_exception.
ENDTRY.
TRY.
lc_bcs->add_recipient( i_recipient = lc_recipient ).
CATCH cx_send_req_bcs INTO lc_send_exception.
ENDTRY.
Send smartforms as HTML email
TRY.
lc_bcs->send( ).
CATCH cx_send_req_bcs INTO lc_send_exception.
ENDTRY.
COMMIT WORK.
WRITE:/ 'Mail sent'.
ENDFORM. "call_smartforms
End Code --->
Thanks and Regards.1- put your images in a directory under the web app directory. Example: app/images/
2- in your jsp, use: String file = application.getRealPath("/images/"); to get the images directory. See http://java.sun.com/j2ee/sdk_1.3/techdocs/api/javax/servlet/ServletContext.html#getRealPath(java.lang.String)
3- it's not the right forum to post this kind of question. Post them in the JSP/Servlet JSTL forum instead -
I pre ordered a album and got songs then it came out so itunes sent me a confirmation and it said to go to available downloads and gave link so I did and it did nothing for me and when I went to the album I wanted it said it was purchased so how do I get my music and don't even see available downloads in the iTunes Store
Check this link, http://www.apple.com/support/itunes/ and go to the contact page.
Sorry, here you go https://ssl.apple.com/emea/support/itunes/contact.html
Message was edited by: ChrisJ4203 -
I'm using FF 34.0.5 (I like it). I use to be able to right click on a link, within an e-mail, and the link would open in a new tab. Now when I click on the link it opens in the same tab replacing my e-mail.
Example - a friend sends me an e-mail containing a link to a web site he thinks I'd like. I click on the link and go to the web site and then go back to the e-mail tab and reply to him. Now, when clicking that link, my e-mail disappears and is replaced by the new site.
How can I fix this? When this happened once before I was told to change the 'value' for a specific 'preference name' through the about:config page.
Can anyone help jog my memory?
Thanks!Is this about clicking a link in an external program?
You can check this pref on the about:config page for external links.
* browser.link.open_newwindow.override.external (-1)
If this pref has the default value -1 then browser.link.open_newwindow is used.
* http://kb.mozillazine.org/browser.link.open_newwindow
*1: current tab; 2:new window; 3:new tab;
You can open the <b>about:config</b> page via the location/address bar.
You can accept the warning and click "I'll be careful" to continue.
*http://kb.mozillazine.org/about:config -
Using firefox 14.0.1. Loading a link using right-click and "Open Link In New Window", results in new window opening but address bar does not show URL. However, if I right click on a link and select "Open Link In New Tab", the Tab shows URL in address bar. So it's working when it's a New Tab but not a New Window.
The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
To Reset Firefox do the following:
#Go to Firefox > Help > Troubleshooting Information.
#Click the "Reset Firefox" button.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
Did this fix your problems? Please report back to us! -
How to remove connect and workbook link after pressing Save as,Print,Export
I have to remove the connect link and workbook link which appear AFTER pressing Save as,Printable Page,Export in a discoverer viewer report. I had already removed the link in the report itself with changing the uix files, but after pushing the link for export, save as or print the link Connect and Workbook still appear.
I know that I have to change something in UIX Files, but which one and what I have to change...? Have anyone an idea? Thanx for fast reply, it´s a urgent problem.
in addition: In metalink,otn and google were no solution...If the tone really is a single (or at least narrow band) frequency like the picture shows, I'd try the Notch Filter on the Audition/Effects/Filter and EQ menu. It might take some playing around to get the exact frequency and tweak the amount of cut you apply vs. the effect it will have on surrounding frequencies--but if you can get the right balance, you can then easily apply this to the whole of every file.
Sorry, can't help on the Premiere Pro question since I only use Audition. -
When I click on an active link from another application, it opens the firefox application, but won't open open the page - it just opens Firefox or takes me to Firefox. No new tab or window is opened and the link is not displayed.
Firefox sent an email to me to confirm that I had asked the above question. The email had a link to click. When I clicked it from Firefox, nothing happened. Then I opened IE, signed into Comcast, opened the email, clicked the link, and it brought me here.
-
Can't find the storage and backup link to start an icloud backup
Why is it that when you create an icloud account the Storage and Backup link isn't always there. I need to create an icloud account and then create an icloud backup right away so that I can setup multiple ipads using the icloud backup. How do I force an icloud backup?
ThanksYou can check your Junk/Spam folders, sometimes the e-mail gets sent there. Also, double check that the primary e-mail address in your Apple ID account is hers. If none of this works, I suggest to wait it out, sometimes it can take up to 24 hours!
-
How do I include Facebook and website links on my feedback form?
Hi;
You can insert a link into your form using the "link" feature, there is a link button on the toolbar to insert a link:
If however you are asking about the "Social", "Like" buttons like many web sites have - that is not something FormsCentral includes/supports, but you can use the "Link" feature above for adding links of your own.
Thanks,
Josh -
how do i stop two windows from openning when i click on an email link, the home page and the link both open. i just want the link to open
That is a bug, so you need to wait until this get fixed.
See https://bugzilla.mozilla.org/show_bug.cgi?id=531552 - Firefox 3.6b opens two windows when opening external links
(please do not comment in bug reports)
Maybe you are looking for
-
I have just updated my software to 10.8.2 and now my sound doesn't work. Any suggestions?
I have just updated my software to 10.8.2 and now my sound doesn't work. Any suggestions?
-
Cost Center validity period change & Business area assignment to cost cente
We are facing with error KS134 - Transaction data already exists for the period. We tried to create new cost center with period split. But I am getting error KS133 - Deletion is not possible (dependent records exist in table ). Hence even creation of
-
Hi, How to change Row height in standart report template, if I use jquery.htmldbHscroll-0.0.1.min (which I found on this forum). Simply rows height are bit another than in colums without scrolling. Thank you !
-
Is there a setting for PC to override iPhone when syncing?
I want to make sure that if I delete a song/playlist from my phone it does not delete from my computer. Using Windows version 12.0.1.26 of iTunes.
-
I can't seem to open anything but the .tif thumnails from my p45+ in bridge. Camera Raw 4.1 won't open the files at all. Is there a time frame for the P45+ to be supported in Camera Raw and Bridge - or am I doing something wrong (likely)? Thanks, Jef