BT Infinity available in my area in the next 6 mon...

Hello, I am just wondering about BT inifinity in my area, at the moment i'm 2.9 miles away from the nearest cabinet because i'm living rural, i recently moved from a house with bt infinity and living off 1mb with 300kbps upload is killing me because I can't get back to my old routine of lag free gaming and watching netflix. I'd just like to note that it said six months three months ago, this is why i'm inquiring.
Now, my question is: When it says it is available in 6 months is it accurate? Are they just saying this to please customers or is it actually going to happen?
Did it ever tell you that it was available in six months and did it actually happen six months later?
Thanks
- Tom

tommyl0l,
Have a look at this link here: FTTC – Fibre to the Cabinet.
Also Thinkbroadband.com have a good explanation of FTTC here: http://www.thinkbroadband.com/guide/fibre-broadband.html
Just scroll down to the FTTC explanation bit of the article.
jac_95 | BT.com Help Site | BT Service Status
Someone Solved Your Question?
Please let other members know by clicking on ’Mark as Accepted Solution’
Try a Search
See if someone in the community had the same problem and how they got it resolved.

Similar Messages

  • BT Infinity available in my area but can't get it ...

    Hey Everybody,
    I've been reading several threads and came across this one;
    http://community.bt.com/t5/BT-Infinity/FTTC-Exchange-and-Cabinet-BT-Wholesale/td-p/181321
    Unfortunately it appears that they've pulled this from public view so I can't access.
    Using the "Find Sold House Prices" tool on Rightmove to obtain House Numbers to Postcodes, i've been able to determine on the BT Infinity checker that some houses in my town can get Infinity.
    My exchange is MRMDW (Middlewich) http://www.samknows.com/broadband/exchange/MRMDW
    FTTC status: Available in some areas
    I logged a call through the normal BT website before somebody contacted me and started talking about Cabinets, I had no idea what a cabinet was and thought he was just trying to fob me off with technical gumf.
    Since i've been reading, I want to try and determine where my Cabinet it, and when its likely to be "Fibre Enabled"
    Can somebody send me a copy of the list
    I found this here; http://www.btwholesale-inspire.com/products2/broadband-products-picrosite/fttc?tab=community
    RFS
    1
    MIDDLEWICH
    MRMDW
    RFS
    3
    MIDDLEWICH
    MRMDW
    RFS
    4
    MIDDLEWICH
    MRMDW
    RFS
    6
    MIDDLEWICH
    MRMDW
    RFS
    8
    MIDDLEWICH
    MRMDW
    RFS
    9
    MIDDLEWICH
    MRMDW
    RFS
    10
    MIDDLEWICH
    MRMDW
    RFS
    12
    MIDDLEWICH
    MRMDW
    RFS
    13
    MIDDLEWICH
    MRMDW
    RFS
    14
    MIDDLEWICH
    MRMDW
    Name
    Postcode
    SAU_NODE_ID
    Exchange Only Flag
    Percent Lines
    Uplift
    Phase
    Deployed
    FTTC or FTTP
    MIDDLEWICH
    CW109GB
    {MRMDW}{p15}
    0
    26.92
    2.38
    MIDDLEWICH
    CW109GB
    {MRMDW}{p7}
    0
    73.07
    2.18
    I have no idea how to read this 
    It looks like I have 2 cabinets for my postcode.
    All I want it Infinity...... can sombody advise when I am likely to get it or how I can quicken the process up ?
    Thanks,
    Scott

    Your exchange is ADSL enabled, and our initial test on your line indicates that your line should be able to have an ADSL broadband service that provides a fixed line speed up to 2Mbps.
    Our test also indicates that your line currently supports an estimated ADSL Max broadband line speed of 3Mbps; typically the line speed would range between 2Mbps and 5.5Mbps.
    Our test also indicates that your line currently supports an estimated ADSL2+ broadband line speed of 3Mbps; typically the line speed would range between 2.5Mbps and 6.5Mbps. Our test also indicates that your line could support an estimated ADSL 2+ Annex-M broadband upstream line speed of 500Kbps and downstream line speed of 3Mbps; typically the downstream speed would range between 2.5Mbps and 6.5Mbps.
    The actual stable line speed supportable will be determined during the first 10 days of use. This speed may change over time, to ensure line stability is maintained.
    Sounds about right......
    I generally get about 6mbps with download speeds of about 730kbps (MAX)

  • BT Infinity - "other utility services are in the a...

    Hi
    My postcode (and exchange - Putney) show up as being Fibre enabled.
    I've just moved in so my landline isn't active yet, but using a phone line from a property just round the corner gives the following error message: 
    "FTTC is currently not available on this cabinet due to following reasons:- Sorry other utility services are in the agreed site for your cabinet. We're looking for a new site."
    What does this mean for me? Does it mean another ISP may be available?
    Secondly, if I sign up for ADSL based broadband with BT, can I upgrade to fibre once it becomes available? Would this mean an additional 18month contract?
    Cheers
    Solved!
    Go to Solution.

    Thanks for that
    I did have a look on the Postcode checker, and got the following results: 
    Featured ProductsDownstream Line Rate(Mbps)Upstream Line Rate(Mbps)Downstream Range(Mbps)Availability Date
    WBC ADSL 2+
    Up to 17
    10 to 19.5
    Available
    ADSL Max
    Up to 7.5
    6.5 to 8
    Available
    WBC Fixed Rate
    2
    Available
    Fixed Rate
    2
    Available
    Other Offerings
    Fibre Multicast
    30-Sep-14
     Is Fibre multicast what I'm looking for?
    Also - does anyone know for sure whether I'd be able to upgrade with BT mid contract to fibre, and whether it would mean another 18month contract?
    Thanks

  • I have created an interaction to show 7 groups and 7 clickable objects. Once all are click the Next Button is show. How can you make that work if you want to embeded the SWF just created but show a button in a master Captivate?

    In flash you can have a shell that has the navigation and some button in the shell are not activated until all clickable objects are clicked.  I am not a flash programmer but it was related to using the path of shell and the sub-project.
    Can anybody help me on that.
    I would like to create Captivate interaction that you can just embedded in a Shell captivate project.
    Do I need to set variables at both levels (Global variable. 

    Hello Lieve, That is the screen shot of my custom interactivity, when all labels are clicked the Continue button will be shown because there is a conditional validating if all Labels have now a value of 1. What I am trying to achieve is to create an interaction where where the continue button (an the back button would reside in another Captivate project. This way there is no reprograming required or use of share-actions.  Everytime we use a similar advanced action or a shared action we have to make sure the object name in the advanced actions or conditional actions are not the same.  I trying to make it a bit dump proof for somebody that does not know any thing about advanced  action and just reuse the label interaction in may projects.  (The only thing they would change would be the image and the content of the label.
    Do you thing I going in the right direction.  (As I said before I have custom javacript in Captivate 5.5) to unlock un button that was part of the LCMS ForceTen). I belive the word .this was part of the object path in the JavaScript.  Can we hide and show a Captivate button.
    I have embedded other Captivate animation in a Master Captivate but the objets were not talking to each other. (You can see a sample http://www.youtube.com/watch?v=Erm4_qdybiA&feature=youtube_gdata). In that sample the continue is always there and can be click anytime.  The 3 steps animation has been done as another project and embedded in my main captivate.  I would like to implement a solution where a my 7 labels have to be clicked in the subproject before showing and enabling the Continue button.
    I hope my explanation is clear enough.

  • WIP was not available one month but was the next month

    a personal number  submitted time on particular date for a  WBS  is still in open WIP. Although the first RRB drafted created on this date  didnu2019t find this WIP item but DMR crated in the next month had this time , why was the WIP not picked up before?

    See Here
    http://support.apple.com/kb/HT1808

  • BT Infinity has reached my area but the line check...

    I noted this rather poor general response to a question I see being asked by multiple community members.
    =========================================================
    Within an exchange area there will be some customers who can't get BT Infinity. There are several reasons why this could be the case:
    Your phone line may be connected directly to the telephone exchange and not to a local street cabinet.
    Your line may be too far from the local street cabinet to have a stable BT Infinity service.
    Your local street cabinet may not be suitable for fibre optic cables.
    We haven't yet got the council's planning permission to do the necessary work at your local street cabinet.
    So, even though you may be within an enabled exchange area, it's possible that your particular line may not be able to have BT Infinity yet.
    =========================================================
    I am still waiting for the promised ADSL2 speeds of up to 40mb promised several years ago. I am beginning to suspect that my little community of some 2000 executive homes built less than 12 years ago has some fundamental infrastructure problem that is just too costly for BT to fix.
    As far as I can tell none of the above excuses is an issue. Although as I have learnt, and many have commented, knowing anything with BT's roll out evasion policy is frustrating. I'm sure behind all this is a simple business case where BT require a certain % sign up to make enabling a cabinet viable. I just wish they could be honest with their customers.
    I know most of my neighbours have given up on BT ever delivering. I also suspect that as we have no other choice of broadband infrastructure BT are in no hurry to satisfy our demands. I have read most of the posts on the forum and cannot see anyway to get a realistic estimate of when or a reason why not.
    So if anyone from BT is listening please be honest, publish real information and if I will never get it let me know so I can stop answering the phone to your annoying sales people! ( who should also know they are trying to sell something they cant deliver)
    Rant over.

    The best bet is to get together and badger your council to get involved. Several people did that round here and BT have eventually responded. Ham pshire County Councildid have a role but it was our local council in Basingstoke who really helped plus a fair few local activists. Its a good argument if you can show that slow speeds are affecting your ability to run businesses etc and that you may have to move.

  • Will Siri be available on iPod Touch in the next few updates?

    I really want Siri on my iPod touch. help :(

    Except in pretty rare cases, the people reading and responding in this forum are just other Apple product users like you.  Apple probably won't see your comment here. Apple doesn't use the Apple Discussions forums for garnering product feedback or suggestions since this intended to be an end-user to end-user (i.e., users like you helping other users) technical issue support feature. You should send feedback via:
    http://www.apple.com/feedback/ - Apple products feedback links

  • Confusion at BT re Infinity availability

    Ive been following the Infinity roll out and have registered interest for a while. Infinity is in my area but I know my line has not been able to get connected, and I understand the various reasons given. Last week however I got a letter in the post from BT giving me the information I've been waiting for that Infinity is now available and to call a number to get connected. Called the number to be told its not available. Unhelpful BT guy on the end of the phone said BT ofetn do this but said that it probably meant my line would be able to connect in a week or two and that I should check on-line. Checked online again and the 'checker' says not expected in my area within the next 6 months.
    So one company, three widly different estimates of availability for the one phone line. Estimates range from:
     "its available now, call to get connected"
    "it not available but should be in a couple of weeks"
    "its not available within 6 months, click to register interest".......
    So which one is right? Very poor customer communication.

    The BT Wholesale Checker has been a bit of a joke, but thats what sales use to ascertain whether you can get it.
    I honestly don`t know what the answer is.
    I am very close to my Cabinet being ready, and have been using the checker regularly for many months. It used to say that I should get fibre at X speed for months, then all of a sudden (after the Cabinet was installed) all it showed was that there would be no fibre and I was lucky to be able to get 1mb speeds on ADSL. This went on for about 2 months, then all of a sudden the checker again shows Fibre should be available soon from my cabinet.
    Its hit and miss.
    toekneem
    http://www.no2nuisancecalls.net
    (EASBF)

  • The approver role is only valid the next day

    All the approvers which are created are only valid the next day. Requesters can only select the new approvers the day after they have been created.
    Any idea how to make an approver valid the same day?

    Hi,
    In user validity make sure you are entering the next day as the valid from. If you have already integrated the user, the validity of the user will be good from the next day.
    In the integreation of user, use the position validity and restrict via date.
    Hope this helps.
    Cheers, Renga
    Award points if this helps ***

  • When will Infinity be available in my area?

    Im actually curious as to when the Burton on Trent exchange will be upgraded? We dont even have Infinity availability, and its something I would seriously consider moving to should it be available in my area.
    Any chance of a guestimate?
    Solved!
    Go to Solution.

    looking at BT openreachs latest list I would suggest like many other exchanges some time after 2012 there are potentially over 5000 exchanges and thousands of street cabinets to upgrade no small job
    If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

  • I have had a reinstall nightmare getting my loops back they are in the apple library, I can access them through the media browser but I only have a few available through the loop browser, how do I get them all back there again? please help

    I have had a reinstall nightmare getting my loops back they are in the apple library, I can access them through the media browser but I only have a few available through the loop browser, how do I get them all back there again? please help

    "Where do I find my hundreds of dollars of downloads I have done since 2005?"
    They will only be where you put them  If you are doing the very basics, then they will be on your computer and they will be in your backup copy of your computer.
    The itunes store is not global at all, never has been. You cannot redownload your content from another country.  You can only use the countrys itunes store for the country that you are physically located.

  • My phone says there's 0 bytes available but only 6 GB are used the phone is supposed to be 8 GB I have no pictures at all and only 6 apps this is really bothering me please help I can't even take pictures because it says I've no storage

    My phone says there's 0 bytes available but only 6 GB are used the phone is supposed to be 8 GB I have no pictures at all and only 5 apps this is really bothering me please help I can't even take pictures because it says I've no storage I also have no messages at all

    My iPhone is a 16GB and it says 9.0GB Available and 3.7GB used; I suspect the missing 2.3GB is occupied by the system software.

  • I am in the process of expanding a database of chemistry journal articles.  These materials are ideally acquired in two formats when both are available-- PDF and HTML.  To oversimplify, PDFs are for the user to read, and derivatives of the HTML versions a

    I am in the process of expanding a database of chemistry journal articles.  These materials are ideally acquired in two formats when both are available-- PDF and HTML.  To oversimplify, PDFs are for the user to read, and derivatives of the HTML versions are for the computer to read.  Both formats are, of course, readily recognized and indexed by Spotlight.  Journal articles have two essential components with regards to a database:  the topical content of the article itself, and the cited references to other scientific literature.  While a PDF merely lists these references, the HTML version has, in addition, links to the cited items.  Each link URL contains the digital object identifier (doi) for the item it points to. A doi is a unique string that points to one and only one object, and can be quite useful if rendered in a manner that enables indexing by Spotlight.  Embedded URL's are, of course, ignored by Spotlight.  As a result, HTML-formatted articles must be processed so that URL's are openly displayed as readable text before Spotlight will recognize them.  Conversion to DOC format using MS Word, followed by conversion to RTF using Text Edit accomplishes this, but is quite labor intensive.
      In the last few months, I have added about 3,500 articles to this collection, which means that any procedure for rendering URL's must be automated and able to process large batches of documents with minimal user oversight.  This procedure needs to generate a separate file for each HTML document processed. Trials using Automator's "Get Specified Finder Items" and "Get Selected Finder Items", as well as "Ask For Finder Items"  (along with "Get URLs From Web Pages") give unsatisfactory results.  When provided with multiple input documents, these three commands generate output in which the URLs from multiple input items are merged into a single block, which yields a single file using "Create New Word Document" as the subsequent step.  A one-to-one, input file to output file result can be obtained by processing one file at a time, but this requires manual selection of each item and one-at-a-time processing. What I need is a command that accepts multiple input documents, but processes them one at a time, generating a separate output for each file processed.  Is there a way for Automator to do this?

    Hi,
    With the project all done, i'm preparing for the presentation. Managed to get my hands on a HD beamer for the night (Epason TW2000) and planning to do the presentation in HD.
    That of course managed to bring up some problems. I posted a thread which i'll repost here . Sorry for the repost, i normally do not intend to do this, but since this thread is actually about the same thing, i'd like to ask the same question to you. The end version is in AfterEffects, but that actually doesn't alter the question. It's about export:
    "I want to export my AE project of approx 30 min containing several HD files to a Blu Ray disc. The end goal is to project the video in HD quality using the Epson  EMP-TW2000 projector. This projector is HD compatible.
    To project the video I need to connect the beamer to a computer capable of playing a heavy HD file (1), OR burn the project to a BRD (2) and play it using a BRplayer.
    I prefer option 2, so my question is: which would be the preferred export preset?
    Project specs:
                        - 1920x1080 sq pix  (16:9)
                        - 25 fps
                        - my imported video files (Prem.Pro sequences) are also 25 fps and are Progressive (!)
    To export to a BRD compatible format, do i not encounter a big problem: my projectfiles are 25 fps and progressive, and I believe that the only Bluray preset dispaying 1920x1080 with 25 fps requests an INTERLACED video  (I viewed the presets found on this forum, this thread)... There is also a Progr. format, BUT then you need 30 fps (29,...).
    So, is there one dimension that can be changed without changing the content of the video, and if yes which one (either the interlacing or the fps).
    I'm not very familiar with the whole Blu-ray thing, I hope that someone can help me out."
    Please give it a look.
    Thanks,
    Jef

  • Adobe encore the software that's used to decode the media is not available on this system. installing the correct decoders for the file you are working with may help correct the problem

    Hi,
      I got this message after importing about ten or so H.264 files that I encoded from Adobe media encoder.  "adobe encore the software that's used to decode the media is not available on this system. installing the correct decoders for the file you are working with may help correct the problem."
    The files we're shot with HD cameras.  Edited in Premiere Pro CS3.  I installed the update 3.0.1 with still the same error.
    I also tried a brand new project and after about ten or so files being imported into a timeline, the system crash.  I tried this twice....
        Thanks in Advance

    Hi Hunt,
           Here is the skinny.  A window base PC.  footage shot with HD sony HD cameras,  Project imported to Premiere CS3.  Once completed sent file to Adobe media encoder and render them as H.264 widescreen high Quality.  Imported them to Adobe Encore CS3.  After about ten files or so.  I got the error message.  Did all the basic trouble shoot like restarting the computer, got latest patch.  Even build a new test project with the same problem.
        Something else I read in the forums, is the encore will transcoded the project to Mpeg 2 anyway, after looking at my project I realized those few files were indeed untranscoded.  So it will be a double compression and I dont want that.  So, my new question is, what is H.264 good for ?????????? I was research that Mpeg 2 is a faster render but H.264 is a slower render but better quality.....
       what do you think ????
       Peter

  • What are all the major SPRO parameters available for MRP run in SAP.

    Dear Frndz,
    What are all the major SPRO parameters available for MRP run in SAP.
    Regards,
    Srini

    Hi,
    For MRP, the main Customization settings involved are:
    1. Activate MRP and Set Up Planning File - OMDU
    2. Define Parallel Processing in MRP - OMIQ
    3. Define Scope of Planning for Total Planning - OMIZ
    If you want to use MRP Areas and include this in Scope of Planning then.
    1. Activate MRP for MRP Areas
    2. Define MRP Areas - OMIZ
    With MDBT of Program : RMMRP000 you can schedule the Background MRP Run. (with a variant)
    If you need any any specific information please inform..
    Regards,
    Siva

Maybe you are looking for