BT infinity + BF4 and cod

hi ive had this net now for a couple of weeks stable nice speed but when i play games i shot someone and it wont kill or register a hit it does it most of the time getting annoying because other people kill me in seconds anyway i can stop this is for ps4 thanks

Hi, you need to read the fifa routing thread as it has some relevance. Gaming on infinity is rubbish, bf4 is unplayable Bt did re route our connection over the weekend to skip paris which made BF4 absolutly a joy to play and it worked as when you shot people they got shot. Then came monday and BT re routed us back through paris and now BF4 is unplayable!
I am leaving BT to go with another provider as soon as i am able so if you are a serious gamer like myself i suggest you move supplier while your still in your cooling of period to an ISP who can supply you with what you require a decent gaming connection.

Similar Messages

BT Infinity, Netgear6300 and Sonos

I have just swapped a BT HH3 router for a Netgear R6300. All PC's, tablet computers, phones connect fine to the new router with super fast connectivity on the 5G network. However when I hardwire in my Sonos system, everthing goes awry.
There is a Play 5 is connected to router, and NAS to the Play 5. 2 further Sonos amps connected wirelessly to the Play 5. I can no longer access internet radio, plus the various PCs and Ipads around the house start to lose their wireless connections (which go to "Limited Connectivity". If I unplug the Play 5 from the Netgear router the rest of the wireless network works fine, replug it in, network to the PC's. Also, when the system is connected up to the Netgear router I can no longer see the NAS from any PC's - reappears if I go back to HH3.
I've cycled the power on all the Sonos units/PCs etc between each router changer over.
The Netgenie app indicates that all the PC's connect fine to the router, it's more that the onward connection to the Openreach modem falls over when the Sonos is connected ?
Any ideas please ?

The 330/20 product was withdrawn by Openreach last month.
BT still advertise a 300/20 product (http://www.productsandservices.bt.com/products/broadband/packages?fttp=yes) so is either a mistake or capped upload.
My neighbour is on Infinity 4 and looking at his speed tests, it looks a capped upload to me.

Can someone please help me re-install my Creative Design 5.5 on my Mac? My MacBook Pro recently crashed and had to have the hard drive replaced. The back up from Time Machine is not reinstalling the program. Since I have the download paid, and codes, I

Can someone please help me re-install my Creative Design 5.5 on my Mac? My MacBook Pro recently crashed and had to have the hard drive replaced. The back up from Time Machine is not reinstalling the program. Since I have the download paid, and codes, I need direction on how to reinstall -- HELP?

Hi bodegakc,
If you have the serial number then please use the below mentioned link to download the product you are looking for .
CS5.5
Also before installing Please go to Applications-->Utilities--> Adobe installers and if there is any uninstaller for CS5.5 , you can remove it and do a fresh install.
You can also use creative cloud cleaner tool before installing.
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
Thanks
Nikhil Gupta

I just purchased an IMac with lion and I tryed to install an old math program that is for winmac running systems. When I try to boot the cd it comes up with a notepad window with a bunch of weird symbols and codes but the program will not start up.

I just purchase my first IMac with lion and I was trying to install a math program I bought 6 years ago. When I went to boot it off the disk while following the program instructions a window popped up with a note pad format with symbols and codes but the program would not download or open. How do I get this program to work? It is a mac compatible program by the way.

Your Mac probably does not know with which application to open the file and is opening a file with a text editor that really needs to be opened by the application itself. Try starting the application first, then use the File > open command to open the file.
As varjak paw comments, there isn't a "winmac" so that's not telling us anything.
Note that it is possible that software purchased 6 years ago may no longer run on your computer. Once we know what it is we can help more.

BT Infinity Username and password

I have read that a username and a password will be sent to me before the arrival of the engineer. The engineer is arriving tomorrow, but i was not yet sent a username and password, whome should i contact to get it...
Solved!
Go to Solution.

Just went to the following forum which explains it all...
http://community.bt.com/t5/BT-Infinity/BT-Infinity-Username-and-Password/m-p/137469/highlight/true#M...

BT Infinity Problem and Atrocious Service

Hi everyone, first time poster, registered last week, hope someone can help me.
I've had BT Infinity since it arrived in my area last year, I was previously a very happy BE subscriber, but switched to BT when FTTC came to my area. All has gone well with my connection until a week ago, when it started to become very patchy, to say the least. My setup is as follows:
1) White BT Infinity Modem
2) HH3 plugged into the modem
3) A Netgear 8-port unmanaged switch plugged into the HH3. I did this because of curiously dire performance from the second HH3 ethernet port
4) Family laptops, iPad, iPhones etc use Wifi of various flavours through the HH3
5) My Xbox 360 connects via Cat5e cable to the switch
6) My PC/server/Media Centre connects via Cat5e to the switch
7) My NAS (Synology Cubestation) connects via Cate5e to the switch
All has been well until a week ago, when the Broadband connection became patchy, for both Wifi and ethernet connections. Sometimes the connection would come back by itself, sometimes only when I rebooted the HH3 and modem. This got worse over a day or two, until I had no broadband connection at all.
The timeline from then is as follows:
1) Thursday 3-Nov @ 6:15am - I phone BT Infinity support and report a fault. I confirm an appointment for Friday am, between 8am and 1pm. I login to BT.com and am able to see this appointment. My wife organizes to take the day off from work to attend, unpaid (she's a yoga teacher).
2) Thursday 3-Nov @ 1pm - my wife arrives home to discover that a BT engineer has come and gone, leaving a "coudn't get in" card. Note, this was not a scheduled appointment.
3) Thursday 3-Nov 2pm - I phone BT Support, and they confirm that an engineer will attend the following day, as planned. I'm worried there may be a problem with this, because of the unplanned visit. They have no explanation for the earlier unplanned visit. They tell me they have spoken to "BT Wholesale", and they confirm the Friday visit is still on. I login to BT.com and still see the planned appointment, by also see another appointment added for 11:39am that day, a record of the unannounced visit.
4) Friday 4-Nov 10am - I call BT Support and they call BT Wholesale who confirm my visit for that morning is still going to happen. I login to BT.com and verify the appointment.
5) Friday 4-Nov 1.30pm - I call BT India to report that no engineer attended the appointment. They have no explanation for this, except to apologise, and suggest it may have been some confusion with the engineer. They make another appointment for Saturday 5-Nov, also 8am to 1pm. I login to BT.com and am able to see the appointment. I arrange to take Saturday morning off work, unpaid (I'm a contractor).
6) Saturday 5-Nov 10am - I call BT Support and they call BT Wholesale who confirm my visit for that morning is still going to happen. I login to BT.com and verify the appointment.
7) Saturday 4-Nov 1.15pm - I call BT Support to report that no engineer attended the appointment. They give me a lovely apology, and tell me that "BT Wholesale" cancelled the appointment. They cannot tell me why I didn't receive a notification, or why they couldn't tell me this earlier. They make another appointment for Monday 7-Nov, also 8am to 1pm. I login to BT.com and am able to see the appointment. My wife arranges to take a second day off work, unpaid.
8) Monday 7-Nov 10am - I call BT Support and they call BT Wholesale who confirm my visit for that morning is still going to happen. I login to BT.com and verify the appointment.
9) Monday 7-Nov 13:30 - No BT engineer attended this morning. This is the third missing appointment in a row.
I have a few questions:
a) Is this normal and acceptable BT service?
b) What do I need to do to get an engineer to my house?
c) How do I get my broadband working again?
d) How do I escalate the whole affair to someone who can do more than just apologise?
(SMBK)
Solved!
Go to Solution.

My "Download IP Profile for your line is -38717 Kbps"
Therefore Max download speed I could achieve is 38Mbps
My "Upstream Rate IP profile on your line is - 2000 Kbps"
And my Max upload speed is 2Mbps
Artificially capped/reduced due to the Infinity Option 1 that I have. My line checker estimates upload capability of 11Mbps)
Have a look at THIS POST for an example of what the test result looks like.
And HERE for screen shots.
If you haven't run the BT speedtester before and therefore do not have your IP profile... perhaps you have some speed test results from other sites that you can compare.
For example my before and after Infinity results from http://www.speedtest.net/
Please Click On any Text in Blue as that automatically links to information.
PC (NDEGR)

BT Infinity 2 and Master Socket.

Hello all. We ordered our BT infinity 2 and telephone line and they said the engineer will be coming on the 13th to set things up. After looking through the installation of BT infinity I found out that it has to be connected to a master socket. This is my problem.
My master socket is located right next to my main door and there is an extention socket in my bedroom. Can I have the master socket moved during installation ? Having a bt hub where you keep your shoes looks odd. Will the engineer relocate the master socket or change the extention socket into a a master socket or I shouldn't be expecting anything ?

Reading through some of the posts, a lot of the installation depends on whether you get a decent engineer, luckily I did.
My master socket was in a downstairs room and my study / office is in the room right above it. I explained to the engineer what I wanted / needed. He was a bit hesitant as he said it meant him having to drill through an external wall, No it won't as I already have a hole that talkes an extension from the master to the study, right easy he says he could convert the extension to the master and make the old master socket the extension. Great, cup of tea and a few hob nobs later job done.
If the engineer can not do what mine did he should fit a 30m extension lead to the master socket and you can plug the hoem hub to this, my understanding is that the extension cable is pinned to skirting or wall they will not lay kit under carpet.
Good luck
Sholtie

BT Infinity 3 and 4

Isn't BT Infinity 3 and 4 suppose to have 30mb upload speed?
https://www.youtube.com/watch?v=mgIMG1ek_zI
https://www.youtube.com/watch?v=j_T5Bb4u16Q

The 330/20 product was withdrawn by Openreach last month.
BT still advertise a 300/20 product (http://www.productsandservices.bt.com/products/broadband/packages?fttp=yes) so is either a mistake or capped upload.
My neighbour is on Infinity 4 and looking at his speed tests, it looks a capped upload to me.

Deletion of Release Group and Code in PO

Dear Consultant,
In Purchase order, we have created some release group and code, Unfortunately we deleted some groups Without deleting in Order wise.
In table level the Release Group is there but in SPRO Release Strategy settings its not there..My consultant advised again you have to create same release group in Release strategy...
If I create same Release Group which are lying in my T16FC Table..But system throwing this err "An entry already exists with the same key"
Could you suggest me.
Regards,
PRIYA.

Hi,
Please go with below mention path: -
SPRO >> Materials Management >> Purchase Order >> Release Procedure for Purchase Orders >> Define Release Procedure for Purchase Orders >> Release Groups.
Here check release group is existing, if yes then remove them and click on save button.
Then try to create new service group.
Some times we delete release group and create new release group with same description without saving changes.Due to this this type of error is occur.
Regards,

Facelets and code insight for XHTML

Hi,
what about support for facelets and code insight for xhtml?
Thanks,
Uros.

Hi,
actually the templating mechanism is deployable in shared libraries, which means you should be able to reuse this outside of JDeveloper with the right libraries in place. The issue we found with Facelets is with the required binding references that we need for ADF to work in templates (though this is an Oracle specific problem for as long as JSR 227 isn't turned into a J2EE standard) .
Also, templates in JDeveloper 11 are referenced at runtime, which means they can be changed on the fly even after deployment and all pages will reflect them. Plus, you don't need to configure a new extension and filter to your JSF files/configuration making it more straight forward.
And yes, it can be deployed to other J2EE containers than Oracle- Not sure what the open source plans are, but I'll point someone from our Trinidad supporters to this thread to shed some light on what the Trinidad community has in the plans.
Your point for a common templating support is well taken (though I wished there would be something better than Facelets ;-) )
Frank

Differences between SLIN and Code Inspector

Hi,
Can anyone tell me the differences between SLIN and Code Inspector(SCI)..?
and in which cases we use SLIN and SCI..?
and as an ABAPer, which one should we prefer..?
Thanks,
Pradeep.

Hi
Extended syntax check or SLIN is used to check the program in all aspects for the different syntaxes like
When you use select single whether you have passed all the key fields or not>
whether you have maintained the text elements texts or not,
Have you used UNIT...CURRENCY along with the QTY and AMOUNT fields when displayed using the WRITE statement
and check for all the varities of statements used in the code, and if there is some problem with that statement/command, it will display as error or warning.
Check following links -
slin
can any one tell me abt SLIN T-CODE
Reward points if useful
Regards
Anji

Data objects and code objects in oracle application

Hi,
can any one please help me out with following question?
1. what are data objects and code objects in oracle apps and why is that difference?
2. How does the objects gets created in Oracle Applications, like during the installation which part is responsible for creating objects and after the installtion later point of time, how the new objects gets created in oracle applications?
3. what are the ways to find out if my 11i application is OATM enabled ?
Thanks in advance

Hello,
I managed to find answer for question 1, yet to find answer for 2 and 3.
Answer for question 1 --
Data objects : store and access business data (tables, indexes, sequences, index-organized tables, etc);
Code objects : process data objects but them don't contains business data (functions, procedures, packages, views, synonyms);
Now, here i have a question - under which objects queues are considered ?

Differences between SSL and Code-Signing Certificates

Hello,
I unsuccessfully tried to use a SSL - certificate for signing an applet (converting from X.509 to PKCS12 prior to signing) and learned, that SSL certificates and code-signing certificates are different things (after seeking the web for ours). Can somebody point out some source of information about this topic ? What are these differences ? Can I convert my SSL certificate into a code-signing certificate ?
Things got even more confusing for me, since my first attempt with an wrongly converted SSL cetificate (I used my public and private key for conversion only, omitting the complete chain) at least worked partly: the certificate was accepted, but marked as coming from some untrustworthy organisation. After making a correct conversion (with the complete chain) the java plugin rejected the certificate completely ...
Ulf

yep, looks like it.
keytool can be used with v3 x509 stores:
Using keytool, it is possible to display, import, and export X.509 v1, v2, and v3 certificates stored as files, and to generate new self-signed v1 certificates. For examples, see the "EXAMPLES" section of the keytool documentation ( for Solaris ) ( for Windows ).
jarsigner needs a keystore so I would assume public and private key pair.
you could list the keys from your store:
C:\temp>keytool -list -keystore serverkeys.key
Enter keystore password: storepass
Keystore type: jks
Keystore provider: SUN
Your keystore contains 2 entries
client, Jul 5, 2005, trustedCertEntry,
Certificate fingerprint (MD5): 13:50:77:64:94:36:2E:18:00:4B:90:65:D0:26:22:C8
server, Jul 5, 2005, keyEntry,
Certificate fingerprint (MD5): 20:90:49:6F:46:BA:AB:11:75:39:9F:6F:29:1F:AB:58
The server is the private key, this can be used with jarsigner (alias option).
C:\temp>jarsigner -keystore serverkeys.key -storepass storepass -keypass keypass
-signedjar sTest.jar test.jar client
jarsigner: Certificate chain not found for: client. client must reference a val
id KeyStore key entry containing a private key and corresponding public key cert
ificate chain.
C:\temp>jarsigner -keystore serverkeys.key -storepass storepass -keypass keypass
-signedjar sTest.jar test.jar server

Help in report UI and code

HI Experts ,
I need to create report and i need to help for GUI aspects (i want it to be looking nice ).
in the report i have 3 options (i don't know if radio button is the best way ) .
1. Read user attributes
2. create user attributes
3. create user values
if user choose to read attributes (which is defult ) the other option are should be deactivated ,
but when user choose to create he can choose one of the option or either both option ( 2,3 )
i need for that i guess 3 buttons .
what is the best why to do that from GUI aspects ,and code will help
I read lot of post on the forum but i get confused
Regards
Chris

HI ,
I am working to do that but i am facing some issue.
when i create TM i want to add new fields to the screen
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-004.
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS: read RADIOBUTTON GROUP g1 USER-COMMAND u1 DEFAULT 'X'.
SELECTION-SCREEN COMMENT 3(15) text-001.
PARAMETERS cre_zm RADIOBUTTON GROUP g1 .
SELECTION-SCREEN COMMENT 21(30) text-002.
PARAMETERS cre_tm RADIOBUTTON GROUP g1.
SELECTION-SCREEN COMMENT 54(30) text-003.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN END OF BLOCK b1 .
This is the code that i add
INITIALIZATION.
LOOP AT SCREEN.
    IF screen-group1 = 'M1'.
      screen-active = '0'.
    ENDIF.
    MODIFY SCREEN.
ENDLOOP.
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
    IF cre_TM = abap_true.
      IF screen-group1 = 'M1'.
        screen-active = '1'.
      ENDIF.
    ENDIF.
    MODIFY SCREEN.
ENDLOOP.
START-OF-SELECTION.
the problem is that when i choose also create ZM it the field appear ,
what i miss here?
Thnaks
Chris

SQ01 help for listing not used problem codegroup and code in notifications

Hi ,
I am making a query through SQ01 to find out how many damage codes created for a particular notification type are not being used .
In infoset I used QMEL which lists problem code group and problem code and as a bonus we also get codegroup text . When I test this query , I get damage code group and code used in all the notifications . I want solution for the following
1)How to list only distinct damage codegroup and damage code (Not per notification wise)
2)Which second table I have to use to get problem code short text
3)Which table I have to add in infoset and how join has to be created so that I get list of Damage codegroups and codes not used in notification .
NPB

Hi Pete ,
1)How to list only distinct damage codegroup and damage code (Not per notification wise)
        I have output like
                  problem code group     Problem code grp text        Problem code    Problem code text
                  MRTR                           Transformer problems        1                        I need table here
                  MRTR                            Transformer Problem           1
                  MRTR                            Transformer problem         2
I need distinct output like
problem code group     Problem code grp text        Problem code    Problem code text
                  MRTR                           Transformer problems        1                        I need table here
                  MRTR                            Transformer problem         2
2)Which second table I have to use to get problem code short text
                I need problem code table
3)Which problem code group and code not used
            Suppose for notification type X I have configured damage catalog Q and Q has MRTR , MRAM , MRGT as code groups and each of them have their own codes (say 1 to 5)...If notifications are created only for MRTR and code 1 , 5
I need not used output like
MRTR 2
MRTR 3
MRTR 4
MRAM *
MRCT *
How can I achieve this using sq01,02 etc
NPB
Edited by: Narasimha Bhat on Feb 1, 2011 4:54 PM

BT infinity + BF4 and cod

Similar Messages

Maybe you are looking for