BT Infinity Does Not Work in Power Cut (but ADSL u...

I upgraded to BT Infinity last month. Last week the area suffered a power cut so my emergency generator cut in automatically (I am disabled) which used to mean that I continued to have internet access -when it was ADSL - but this time there was no internet access even though the blue bar remained lit on the Hub5. I read elsewhere that the street cabinets are actually powered by the local mains. Is this correct? If so is there a work-around for those of us with disabilities who rely on the internet more than most and have backup power to the home installation? Thankyou.

Thanks. So does that mean that after several hours the cabinet battery runs flat and so the internet connection fails? This latest power cut began at 11:00pm so the battery might have been flat by the following morning (this power cut lasted for 36 hours in total). However what is curious is that the cabinet is situated right outside the exchange which has its own battery backup and generator. I guess what I am trying to establish is whether it is in the nature of Infinity that it inevitably stops working (albeit after several hours) during a power cut. Previously ADSL continued to work throughout multiple-day power outages. All advice is appreciated. Thankyou.

Similar Messages

  • HT204187 Email account does not work on the Mac but works on my iPad and iPhone. The account information was added on the Mac. I keeps rejecting my password.

    I have seral email accounts on my Mac. One does not work on the Mac but works on my iPad and iPhone. The account information was added on the Mac. I keeps rejecting my password.

    You don't input the information in manually for iCloud mail. It is automatically set up for you when you sign into iCloud via System Preferences and choose the Mail checkbox. Sign out of iCloud or deselect Mail in iCloud preferences. Open Mail's preferences and choose accounts tab. If iCloud account still exists in the list, delete it. Sign back into iCloud or check the box for mail. The account will be auto created for you.

  • Google drive does not work with specific group but works with all users group!!

    Hi,
    Why Google drive does not work with specific group but works with all users group?
    My rule :  Internal > external > all users = works fine
    But
                   Internal > external > A group = not working !!

    Hi,
    if you require user authentication in Firewall policy rules, the clients must bei Webproxy clients (for HTTP / HTTPS) or TMG clients (for TCP/UDP):
    http://technet.microsoft.com/en-us/library/bb794762.aspx
    regards Marc Grote aka Jens Baier - www.it-training-grote.de - www.forefront-tmg.de - www.galileocomputing.de/3276?GPP=MarcGrote

  • I have the macBookPro and the problem is the mouse pad does not work I tried everything but still does not work what should i do ?

    I have the macBookPro and the problem is the mouse pad does not work I tried everything but still does not work what should i do ?
    so i'm using the usb mouse

    I want to clarify the issue.
    The issue is with the MBP trackpad, and it works fine with an attached USB mouse.
    With some ingenuity, you might be able to fix this yourself, but I suggest visiting your local Apple Store/Genius Bar. Some have fixed this issue and have posted their results online, but the Apple Store should be your first destination.
    Post here with your results!!

  • Alum BT keyboard does not work after wake up - but BT trackpad does!

    Here is my set up:
    MBAir 2011 model (13", i7 4GB, Lion.. all up to date)
    Desktop set up (same at work and home)
    - Thunderbolt display
    - Aluminum Bluetooth Keyboard
    - Aluminum Bluetooth Trackpad
    What I do:
    - Plug in the sleeping mbair into my display via thunderbolt and power cable
    - Wake up using external bluetooth trackpad
    - computer wakes up and external trackpad is functional (it always works)
    - 7/10 times the external keyboard will not connect to enter password to get into system
         - I have tried power button banging on it for a long time and does not work
         - open mbair and type password in and remove keyboard and repair and after several tried it will work
         - then I can close mbair and use external keyboard
         - painful to do this most days at home and work
    What have I tried
    - PRAM, SMC reset
    - remove all BT entries - trash blutooth properties files and freshly add them back
    - I have tried waking using keyboard as well and it does not work
    Only think I have wanted to try and have not found out is, if keyboard can reset to factory.
    Yes I also have the occasionaly wifi not connecting from sleep issue

    Hello
    Have you noticed this problem on factory settings or only on your Windows 7 installation? Maybe its just a driver or software issue
    Make also sure that latest BIOS version is installed. Look on the Toshiba website for an update:
    http://eu.computers.toshiba-europe.com > Support & Downloads > Download Drivers
    Before you start the update, make sure that all programs are closed and you are logged in as Administrator.

  • Touch pad scroll does not work in firefox minefeild but works in firefox 3.7

    Love Minefeild, but have notice that my touchpad scroll up and down does not work. This function works fine in Firefox 3.7 and other software. I am using the lastest nightly builds. Is there a solution?

    Sounds like your scroll pad drivers need to be updated, but considering that Firefox 4 is months away from being released the new drivers might not be available yet. Check with your manufacturers website in the software / drivers downloads section for newer drivers.

  • MB Air two finger scroll does not work for a user but does for another

    Hi
    MB Air. 10.9.3.
    Defective Trackpad was just replaced. Two finger scroll does not work for the main user. I made a test log in and two finger scroll works. I booted off an external drive and two finger scroll works.
    I pulled all of the user preferences out, logged out and in and still does not work. Zapped PRAM. Checked all trackpad settings. No luck.
    Tried this in Terminal:
    defaults write -g com.apple.trackpad.scrollBehavior 2
    Any ideas?

    This sounds strange but check the settings in Settings>Accessability for the track pad. I belive your problem lies there not in Track Pad set up in Settings.

  • Officejet Pro L7590 Scan feature does not work after power failure!

    Hello guys,
    I have an L7590 set up as a wired network printer through a netgear router. I am running Windows Xp. I installed the printer and everithing was working fine, but whenever there is a power outage the printer scanner does not see the computer. I am able to print from the computer but the twain feature is the only thing affected. I checked the router "Attached devices" and the printer is listed. The only way that I have being able to repair the problem is doing a complete uninstall and reinstalling the printer software again. Does anybody knows why this happpens or how to fix it? thanks a lot.

    I am having a very similar problem.  Everything will be working fine, and then one day the scan function will not work.  It will print fine but it wont scan.  It locks up my computer and then I have to reinstall.  Now it has happened and I cant get it to work even after a reinstall.  Printer works fine, but scanning wont work.  I am able to ping the printer and nothing has changed on my computer.  I am lost with this one.  I hope someone is able to answer this.

  • Printing does not work in OSX applications, but did work in OS 9

    As the name of this thread implies, I cannot print from any OSX applications, but printing does work in OS 9 applications. I recently upgraded to Adobe Creative suite 3 (I know, i know, I am behind) and have had nothing but problems printing (even with native apps like preview). Before I upgraded I didn't have as many issues printing. Since the upgrage, When I attempt to print from Adobe Illustrator I get the error message "cant print the illustration". When I attempt to print from native MacOS Apps (like Preview) I get the error message " Error while Printing". Additionally, every time I attempt to use my scanner I get the error message "Scanner not found". Can anyone help me out there?

    It would have been helpful if you had included the manufacturer and model of your printer and scanner along with details on how they are connected to your Mac. Without that information there's little else for anyone else to work with along the lines of assisting you.
    How does your printer and scanner connect to your Mac - serial port or USB? If they use a serial port you're kind of out of luck as Mac OS X does not natively support serial ports. There may be some third-party software drivers available that could "turn on" serial ports within Mac OS X however.
    If your devices connect via USB, have you installed the Mac OS X version of their drivers? Older USB-equipped printers and scanners may not be supported by their manufacturers for use with Mac OS X. Again, if one looks hard enough, there may be some other third-party or open source drivers available that may let older USB equipment work with Mac OS X.

  • Screenshots does not work, Grab captures nothing but white.

    Recently replaced hard drive with a new SSD. Everything is fine but screen captures currently do not work. I can hear the click, see the target when doing command + shift + 4 but no file is created. Also grab runs but only captures blank white area. Thoughts?

    Yes its known issue to apple and they are working on it. Same issue with my apple store.
    Mac App Store does nothing when I click download on any App

  • Flash Player does not work with Standard User, but will work when browser is "Run as Administrator"

    I don't understand why this is happening, but Flash Player will not work when a Standard User is using the browser. It will only work when the browser is run as an administrator. Any way to fix this? I've tried to uninstall, and reinstall the player, and it still wouldn't work.
    The user is on Windows 7, 64-bit. Using IE 10.
    Flash not working for Standard User - YouTube

    Any update to provide at all here guys?  Again, in my situation, it's very much rights-related as a standard user doesn't even report that the flash player exists when testing it on the Adobe Flash Version Detection website (despite it showing up in Control Panel and under Add/Remove Programs).  I've already tried giving the C:\Windows\System32\Macromed and files/subfolders appropriate permissions for the standard user and still nothing.  If I either give the user in question full local admin rights or logon as the domain admin, then the Adobe Flash Version Detection website says Flash is installed and Flash works fine.
    Thoughts???

  • Batch process does not work in one service, but worked in another.

    Hi Fellows,
    We have here a batch process with a code encrypted, that runs daily in a production environment.
    Tonight this batch process did not work.
    It is expected that this process runs in about 20 seconds, but tonight this process used about 3 hours and did not finished.
    We checked if it was concurrency, killed some sessions and tried again, and nothing has changed.
    And then someone changed the service that this process uses, it was 'bat' and changed to 'dba'. And it worked succesfully in 11 seconds.
    Here is the tnsnames that the batch process uses:
    bat =
    (DESCRIPTION =
    (LOAD_BALANCE = OFF)
    (FAILOVER=ON)
    (ADDRESS = (PROTOCOL = TCP)(HOST = 10.10.x.x1)(PORT = 1521))
    (ADDRESS = (PROTOCOL = TCP)(HOST = 10.10.x.x2)(PORT = 1521))
    (ADDRESS = (PROTOCOL = TCP)(HOST = 10.10.x.x3)(PORT = 1521))
    (CONNECT_DATA =
    (SERVER = DEDICATED)
    (SERVICE_NAME = bat)
    (FAILOVER_MODE =
    (BACKUP = dba)
    (TYPE = NONE)
    (METHOD = BASIC)
    (RETRIES = 20)
    (DELAY = 5)
    dba =
    (DESCRIPTION =
    (LOAD_BALANCE = OFF)
    (ADDRESS = (PROTOCOL = TCP)(HOST = 10.10.x.x1)(PORT = 1521))
    (ADDRESS = (PROTOCOL = TCP)(HOST = 10.10.x.x2)(PORT = 1521))
    (ADDRESS = (PROTOCOL = TCP)(HOST = 10.10.x.x3)(PORT = 1521))
    (CONNECT_DATA =
    (SERVER = DEDICATED)
    (SERVICE_NAME = dba)
    Do you guys know what could be the reason?
    Thanks in advance.

    We set the service which the app should connect.
    These services are set in srvctl:
    ora.cms.bat.cms1.srv ONLINE ONLINE on fastora1
    ora.cms.bat.cms2.srv ONLINE ONLINE on fastora2
    ora.cms.bat.cms3.srv ONLINE ONLINE on fastora3
    ora.cms.bat.cs ONLINE ONLINE on fastora1
    ora.cms.cms1.inst ONLINE ONLINE on fastora1
    ora.cms.cms2.inst ONLINE ONLINE on fastora2
    ora.cms.cms3.inst ONLINE ONLINE on fastora3
    ora.cms.cmsuser.cms1.srv ONLINE ONLINE on fastora1
    ora.cms.cmsuser.cms3.srv ONLINE ONLINE on fastora3
    ora.cms.cmsuser.cs ONLINE ONLINE on fastora1
    ora.cms.db ONLINE ONLINE on fastora1
    ora.cms.dba.cms1.srv ONLINE ONLINE on fastora1
    ora.cms.dba.cms2.srv ONLINE ONLINE on fastora2
    ora.cms.dba.cms3.srv ONLINE ONLINE on fastora3
    The batch process connects to a service [ bat ], but it hangs and don't finish. But when we change the service do dba is just pass in some seconds and finish succesfully.
    Connected to DB [issr@bat  ]
    PAYware CMS Version 8.0 - Module : E352 Release : 000000002
    Program: /cms/cmsissr/CMS/bin/issuer/mepcs352
    Release: 2
    PARAMETERS OK !!!
    NUMBER OF PROC.: 000001
    Number of transactions : +000047570
    Number of parallel processes: 000001
    Transactions by process: 000000000000047570
    Transactions Processed: 000010000

  • HT4113 my power button does not work to power down phone.  there for leading to the unablility of reseeting phone

    please need help need to reset my iphoe but power button is broken and on a new computer.  what do i do

    You can also make a Genius Bar appointment at your nearest Apple Store and have it replaced under your warranty.

  • I am using windows 7 64 bit. when a pdf link is opend from any website the touch pad does not work vertically on websites but only on pdf page but no problem in internet exproler

    oftenly i need to open pdf documents online from diffrent web site but every time touch pad does work properly on pdf page but not on web pages already opened(vertically). i open same files and web pages with internet exproler but fuctioning smooth

    Many thanks.
    With those symptoms, I'd try the following document:
    Apple software on Windows: May see performance issues and blank iTunes Store
    (If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.)

  • Flash 13.0.0.214 does NOT work on some sites, but works fine on all others

    Hi!
    I watch several wildlife nest-cams every day running Windows 8 using Firefox 29.0.1, but yesterday morning, (after I'd already watched the 6 cams I view every day), I started getting a solid, black screen with, "Error loading plugin: Plugin file not found", on TWO of these sites.
    My attempts to resolve the problem were:
    1.  Checked all the other web-cam sites I view daily, and there's only a problem on 2 of them.
    2.  Went to You Tube, Facebook & other similar sites and I can view streaming media.
    3.  Refreshed pages-when that didn't help, I closed & reopened Firefox & still 2 sites with "plugin loading error"
    4.  Completely shut-down my laptop & rebooted.
    5.  Did "System Restore" to earlier in the day when ALL web-cam sites were working.
    6.  Went to Adobe Flash site & verified that I had the most current version...I do, & I saw the animations on Flash site.
    7.  Verified my Flash Plugins in Firefox...AGAIN...they're all activated & up-to-date
    8.  Checked & re-checked ALL the web-cam sites I view every day, (for, at least the 10th time), and the
         same 2 sites are still showing the "Error loading plugin: Plugin file not found" on a black screen.  Even
         though the video isn't seen the "chat" area is functioning, (I don't know if that's important, but I
         thought I should mention it).
    9.  I posted the issue on Firefox's Forum but no one has an answer since Flash works everywhere except
         for 2 sites.
    I've tried everything I can think of to troubleshoot this, but as you can see, I've had no success in solving this "mystery".
    As for the 2 sites I can't view, they are: 
                                        http://www.pixcontroller.com/eagles/    And
                                        http://www.westmorelandconservancy.org/BlueBirdWebcam-1.htm
    I've been watching these sites for MONTHS, so why I can't view them all of a sudden, well, I'm clueless, (I guess you already figured that out...ha ha ha).  I was watching the 2 sites listed above early yesterday morning, then when I looked at one of the other cams I view and came back to these 2 sites, I got the "error message".
    I hope you have a solution for me, as I'm desperate!  I'm WAY behind in my documentation for these 2 sites, so hopefully you'll have an easy answer.  If it's a technical thing, please use LOTS of details, as I'm not very technically inclined.
    Thanks in advance for your help!
    Best Regards,
    DogPal 
    P.S.  I just checked on another site that offers many different wildlife cams, & I CAN view the "Pittsburgh Bald Eagles" if I go through: http://www.ustream.tv/channel/pittsburgh-bald-eagles    I'm sure this means something, but since I don't understand this technical stuff I don't know what that is!  (I told you I'm clueless!) 
    Message was edited by: Donna ....I had additional information

    First, thank you for a very good and detailed description of your problem; so few people provide any information when asking for help.
    Trying to reproduce; the first of your links works fine on Firefox, PaleMoon, and Internet Explorer.
    The second link only shows a blue screen after the ad (on the same three browsers)
    What is your installed Flash Player version?  See Flash Player Help | Flash Player Help
    Can you also try on a different browser such as Internet Explorer?

Maybe you are looking for