BT Infinity in our area but cabinet not supported
Everybody on the streets around us can get bt infinity, yet before when we checked for bt infinity we got the following message:
This postcode has some Exchange Only lines
This means there is currently no cabinet to run FTTC from.
Openreach may deploy FTTC/P in the future to this area.
100%
M_A
Now however, we get this message:
BT BROADBAND AVAILABILITY CHECKER Telephone Number on Exchange NEWTON ABBOT is served by Cabinet 10
Available ProductsDownstream Line Rate(Mbps)Upstream Line Rate(Mbps)Downstream Range(Mbps)Availability Date
Featured Products
WBC ADSL 2+
Up to 8
5.5 to 12.5
Available
WBC ADSL 2+ Annex M
Up to 8
Up to 1
5.5 to 12.5
Available
ADSL Max
Up to 5.5
4.5 to 8
Available
WBC Fixed Rate
2
Available
Fixed Rate
2
Available
Which is exactly the same as my parents number who can get bt infinity as shown below:
BT BROADBAND AVAILABILITY CHECKER Telephone Number on Exchange BLANDFORD is served by Cabinet 10
Available ProductsDownstream Line Rate(Mbps)Upstream Line Rate(Mbps)Downstream Range(Mbps)Availability Date
Featured Products
WBC FTTC
Up to 80
Up to 20
Available
WBC ADSL 2+
Up to 12
7 to 17
Available
WBC ADSL 2+ Annex M
Up to 12
Up to 1
7 to 17
Available
ADSL Max
Up to 6.5
5.5 to 8
Available
WBC Fixed Rate
2
Available
Fixed Rate
2
Available
Other Offerings
Fibre Multicast
Available
Now it doesn't show on our new message that we are connected to an exchange only line, it now states that we are connected to cabinet 10.
Also as our area has been accepting orders for bt infinity since 2012 (have checked on http://www.superfast-openreach.co.uk/where-and-when/ and all green as accepting orders).
Does that mean that bt have upgraded our line and we should soon be able to get bt infinity or are we still stuck on copper wires and will have to wait until bt get around to upgrading exchange only lines sometime in the distant future?
Two different exchanges - Newton Abbot and Blandford, so two different cabinets.
If you found this post helpful, please click on the star on the left
If not, I'll try again
Similar Messages
-
Why are these Webservices not supported in VC ?
Hi all,
I am using NW04s SP9, and I plan to make MDM-Application with VC.
Therefore I introduced MDM-WebService into NW and defined it on VC.
but "searchRecords" of "MDMSearchRecords" was displayed with "Not supported"
in the right frame .
Mmm...
So I decided to think from a beginning.
[http://www.27seconds.com/Holidays/US/USHolidayService.asmx?wsdl|http://www.27seconds.com/Holidays/US/USHolidayService.asmx?wsdl]
I defined above it on VC and I used "Getholidaydate" .
Good! .
However,,, "Getholidaysforyear" was also "Not supported".
Why are these methods "Not supported" ? .
and how will come to be usable these methods in VC? .
Thanx in advance.
Regards,
k.sugimoto.Hi
Visual Composer supports Web services that are compliant with the Basic Profile 1 standard of the Web Services Interoperability (WS-I) Organization (http://help.sap.com/saphelp_nw70/helpdata/en/e0/92583ab4da4b9cb524f61ba4267d25/content.htm)
Best regards
Vincenzo -
Are .mp4 files not supported when trying to merge 2 videos into 1 video?
Are .mp4 files not supported when trying to merge 2 videos into 1 video? The steps in the manual seem simple enough. But the paste function won't work on the 1st video after selecting all and then copy on the 2nd video.
There are 9 different versions of iPhoto and they run on eight different versions of the Operating System. The tricks and tips for dealing with issues vary from version to version and OS to OS. So before anyone can help, they need information to work with. Things like:
- What version of iPhoto.
- What version of the Operating System.
- Details. What were you doing when the problem arose?
- Did it ever work properly?
- Are there error messages?
- What steps have you tried already to solve the issue.
Anything else you can think of that might allow someone else to understand your issue. -
JavaScript required. The browser that you are using does not support JavaSc
I keep on getting this message when I'm trying to log on to Hotmail
JavaScript required. The browser that you are using does not support JavaScript, or you may have disabled JavaScript
And my browser (IE 6) cannot go to any java links. They either don't load or they are blank pages. I tried installing java, enabling them on the internet options, and even installed a new browser it is still the same thing!!!
I'm very pissed right now but I really really need some help. Sorry for the inconvenience.
Thank you, ZaragonJavaScript is different from Java. Somehow, security has gotten turn on in IE. If you go to tools, internet options, security, then look at Internet (for hotmail anyway), hit the custom level button, you will see that scripting has been disabled.
-
So I want to sell a product that is made up of 4 downloadable products. (Totalling ~ 200meg)
The only way I have found is to sell membership to a secure area where the files are linked.
When I create the secure zone, I want a one-time-fee, but the system says:
"ERROR: The payment gateway that you are using does not support recurring payments"
The payment isn't recurring!
Micah"Note that you have to use seamless gateway to process such payments."
Right, but that's the problem, we're not usiong a seamless gateway and thus we get the error. Again, the system should note that we're doing a one-time charge and not throw the seamless gateway error.
Micah -
CUCM 9.1 in VirtualBox - The hardware you are using is not supported for this product
I'm trying to load CUCM licensed through my work onto an oracle VirtualBox running linux redhat, and its unpacking linux fine onto the vbox, and passes the hardware test on boot but when it goes to load I'm getting the error "The hardware you are using is not supported for this product."
I have dedicated to the VM:
4GB ram
4 CPU's (tried 2 and 4)
80GB Hard Drive
What in the world could be jamming this up? Anyone else ever run this or know what the deal is?
Any input is appreciated, thanks!We only support ESXi
Sent from Cisco Technical Support iPad App -
I have over $5k on apple products...I love all them, but iPad not supporting flash is very frustrating! When apple will address this short come?
Probably never : http://www.apple.com/hotnews/thoughts-on-flash/ . Plus Adobe have never managed to make a version of their flash player that works on iOS devices, and they have recently announced that they are stopping development on all mobile versions of it.
Browser apps such as Skyfire, iSwifter, Puffin and Photon 'work' on some sites, but judging by their reviews not all sites. Also some websites, especially news sites, have their own apps in the App Store, and there is the built-in YouTube app. -
I have a vizio led 26" but displays not support when I connect to my MacBook pro
I have a vizio led 26" but displays not support when I connect to my MacBook pro
Hello, Benlot.
You may find this article helpful in troubleshooting the external display issue.
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/ht1573
Cheers,
Jason H. -
When I publish a SWF/HTML5 module with Captivate 8 and try to run it using IE9 - I get the following error "The content you are viewing is not supported in the current Document Mode" - anyone know why?
TLCMediaDesign wrote:
I've seen a lot of threads about getting rid of these kind of messages. Those messages are there for a reason most of the time. If you have CSS animations or other HTML5 standards that cannot be rendered in IE9 they won't magically start working becuse you got rid of a message. I use IE9 since that is the minimum standard for the client. I have never seen that message publishing to HTML5 content.
IMO, if your client has IE9 I think that you should develop with IE9 in mind not IE11.
When you say "develop with IE9 in mind not IE11" do you mean use SWF instead of HTML5? I used the standard question types, and a converted PowerPoint presentation. I didn't add anything out of the ordinary. -
I keep getting the message "Safari browser version you are useing does not support community tool bar." Where is this coming from and how do I get rid of it ?
That toolbar/ct plugin causes problems for all who install it!
Close Safari, then locate and delete the following files and it should be gone:
/Library/Application Support/Conduit
/Library/InputManagers/CTLoader
/Library/Receipts/ctloader.pkg
/Library/Receipts/<Toolbar name>.pkg
/Library/Application Support/SIMBL/Plugins/CT2285220.bundle
/Users/<User name>/Library/Application Support/Conduit
where / is the root library on your Hard Disk.
If you are running Snow Leopard you should also look here:
Library/launchAgents/com.conduit.loader.agent.plist
Library/Application support/conduit plugins
Note: Safari does not support any third-party toolbars except those supplied as an extension to Safari via the Extension Gallery. -
Deactivate a depreciation area (Real area but does not post)
Hi Guys
I want to deactivate a depreciation area.
It is a real depreciation area but area does not post in GL.
Is there any risk in deactivating the depreciation area in the asset class ? We do not want to use this area any more '
ThanksThanks Anil
But my question is
Should I only have to deactivate the depreciation area in the asset class OAYZ ? In this case new asset won´t see this depreciation area , but old asset still show this depreciation area in AS03. It seems no issue with this approach.
Someone has suggested me also to deactivate it in OABN (but this depreciation area did not post) If I untick ordinary depreciation field in OABN when I go to the asset I have an error message:
"You cannot manage ordinary depreciation in area 60
Message no. AA656
Diagnosis
According to Customizing settings, ordinary depreciation cannot be managed in area 60. The posting being processed changes ordinary depreciation.
Procedure
Check the amount entered and the transaction type."
So, what is the safety procedure just go to OAYZ (I think this is the right way) and unclick the field "deact" ?
"Indicator: Depreciation area is deactivated
Set this indicator if you want the depreciation area to be inactive in this asset class or asset (although it is defined in the chart of depreciation)."
Any other suggestion ?
Regards -
sorry I wrote before but forgot to edit it.Since I came home 3 weeks ago from surgery. I can be on any site especially on facebook playing games and it goes white completely with out warning so I have to restart my computer again to get back especially on facebook.I play alot of games on there and other things.No matter if I'm chatting .ect on any of my sites the page goes completely white.I get a message to upgade to mazolla firefox 5 but will not except some of my sites like replayer,ect.. so I keep putting it to ask me again in 7 days. I need those sites.Can you help me PLEASE.Going for another surgery in Aug. and my computer is the only thing that keeps me busy unless I want to watch TV all the time.I have Mc Afee security for free from att and they tried to fix it but it still doing it.I have window vista can you help me.don't know much about computers but my grandchildren did get into it and put like Itune and certain games that I was chraged for which I cleared up.Can you help Please..do not want to upgrade cause some of my sites will be gone especially real player and my other sites.I told to go K2 here by Mc Affee security...Have no crash Id.
You're welcome.
Voicemail is left at your carrier's server. That will continue to work unless you report your iPhone as lost or stolen with your carrier.
You may never find it again and you can't if the iPhone remains offline or out of service which means the iPhone is powered off or doesn't have cellular reception. -
Ill try to work with some pages that need java .... And apple not support java ???
How i work with java ? There is a way to work and downloding the pages ?1. We are not Apple. This is a user to user forum.
2. Java is not supported because it does not meet Appleñs security criteria for their mobile OS.
3. You can download brwosers from the App store that support Java, though it may not be 100%. Search for "Java Browser" in the App store.
4. For feedback use the feedback link. http://www.apple.com/feedback/ -
why despite numerous attempts on numerous iPhone, does Apple not longer support Godaddy email accounts?
I have followed the proper methods described in Godaddy to no avail. At this point it is clearly an Apple issue.
Any help is appreciated.Which "proper methods" have you used exactly?
These?
http://support.godaddy.com/help/article/8311/automatically-setting-up-email-on-y our-apple-mobile-device
http://support.godaddy.com/help/article/3423/iphone-setting-up-email -
Just upgraded my mac book pro to the lion operating system, the next day my printer broke. Went to buy a new printer that supports AirPrint because I also have an iPad ( my old printer did NOT support AirPrint ). The printer I bought is an HP that said it supported AirPrint, when I installed the printer and try to run the installation software it said the printer did not support lion. Any answers or suggestions, I would LOVE to be able to finally print from my iPad.
Check with HP whether the printer and/or printer driver is compatible with Lion. Any hint as to what printer?
Maybe you are looking for
-
I've clicked on the 'get info' tab, but it says read only for all files.
-
How to Enforce Sharepoint 2013 content type validation rules when modifying document using Word 2013
Good day, I have two date columns (Start Date and End Date) in a content type in Sharepoint 2013. A file library uses this content type. In the document template I have the two dates (Start Date and End Date) showing in the Document Panel. I can ed
-
Hi All , i have a below requiremnt HOLIDAY ALLOWNCE Applicable to the employees ((Basic + HRA + Conveyance + CCA + Special Allowance)/30 x Number of days not applicable for HO employees ) should be maitained in 0015 [ADDITIONAL PAYMENTS] The wage Typ
-
Please can you give us some guidance regarding what/if licences are required for Business Object reports. We currently have 10 deski BO licences. We are looking to write many reports as part of the installation of a new Adult Care Management system ,
-
XML Export Bug - Any workarounds?
Before we go any further, I am running 5.0.3 and I HAVE created a bug report, but since I'm not expecting a new release (bug fix) in the next couple of days/weeks I was hoping the community here might have a workaround or know if there is something I