BT Infinity - rollout not registering?
I have been waiting for the rollout of Infinity to the Bridgend exchange for some time. It was scheduled for 31st March 2011 and I watched with interest the fleet of Openreach vans installing new cabinets all down the road I live on including the the one 50 yards from my house.
They were still on our road in April, and if I remember rightly the date on the website got pushed back to June. Currently it says that the exchange is now rolled out.
Before this the line checker had confirmed that my line was scheduled to roll out on 31st March, but now it says I can't get it and that there are no plans to roll it out in my area!
I understand that not all cabinets for an exchange will necessarily have infinity rolled out to them, but I saw them install the new cabinet with my own eyes, so the usual argument about planning permission etc surely can't apply?
Could it be that the BT database which records the rollout data hasn't been updated for my cabinet?
The old cabinet has the number 21 printed on the front and side, the new one has no marks that I can see.
If anyone knows why this cabinet is not activated can they please let me know.
Thanks
Huw
Hi
below is the list of postcodes that use cabinet 21.
The new Fibre Optic cabinet alongside/nearby doesn't get marked with a number.
The telephone number check is normally the most accurate check.
However if your sure 21 is your cabinet and it's powered up... you can hear the fans running inside it.
And perhaps you know of a neighbour/friend with a post code using cabinet 21, that is getting Infinity/or shows it's available for their telephone line.
That may add up to evidence to show for your line there may be an error on the Openreach database.
It could be worth contacting the very helpful forum mods with this information.
Contact form can be obtained by clicking on the name of any forum mod.... Takes a good few days due to their workload, but you will get a reply.
http://bt.custhelp.com/app/contact_email/c/4951
SWBNP BRIDGEND CF31 4SH {SWBNP}{p21} 0 100 4.07 5a Yes FTTC
SWBNP BRIDGEND CF314AX {SWBNP}{p21} 0 1.96 4.07 5a Yes FTTC
SWBNP BRIDGEND CF314BB {SWBNP}{p21} 0 26.47 4.07 5a Yes FTTC
SWBNP BRIDGEND CF314BQ {SWBNP}{p21} 0 100 4.07 5a Yes FTTC
SWBNP BRIDGEND CF314BY {SWBNP}{p21} 0 2.04 4.07 5a Yes FTTC
SWBNP BRIDGEND CF314HJ {SWBNP}{p21} 0 35.71 4.07 5a Yes FTTC
SWBNP BRIDGEND CF314HP {SWBNP}{p21} 0 38.77 4.07 5a Yes FTTC
SWBNP BRIDGEND CF314HQ {SWBNP}{p21} 0 28.12 4.07 5a Yes FTTC
SWBNP BRIDGEND CF314HR {SWBNP}{p21} 0 15.38 4.07 5a Yes FTTC
SWBNP BRIDGEND CF314HS {SWBNP}{p21} 0 100 4.07 5a Yes FTTC
SWBNP BRIDGEND CF314HT {SWBNP}{p21} 0 61.9 4.07 5a Yes FTTC
SWBNP BRIDGEND CF314HW {SWBNP}{p21} 0 21.56 4.07 5a Yes FTTC
SWBNP BRIDGEND CF314RL {SWBNP}{p21} 0 100 4.07 5a Yes FTTC
SWBNP BRIDGEND CF314RN {SWBNP}{p21} 0 91.8 4.07 5a Yes FTTC
SWBNP BRIDGEND CF314RR {SWBNP}{p21} 0 100 4.07 5a Yes FTTC
SWBNP BRIDGEND CF314RS {SWBNP}{p21} 0 100 4.07 5a Yes FTTC
SWBNP BRIDGEND CF314RT {SWBNP}{p21} 0 16.66 4.07 5a Yes FTTC
SWBNP BRIDGEND CF314RW {SWBNP}{p21} 0 100 4.07 5a Yes FTTC
SWBNP BRIDGEND CF314SD {SWBNP}{p21} 0 75 4.07 5a Yes FTTC
SWBNP BRIDGEND CF314SE {SWBNP}{p21} 0 100 4.07 5a Yes FTTC
SWBNP BRIDGEND CF314SJ {SWBNP}{p21} 0 100 4.07 5a Yes FTTC
SWBNP BRIDGEND CF314SL {SWBNP}{p21} 0 100 4.07 5a Yes FTTC
SWBNP BRIDGEND CF314SN {SWBNP}{p21} 0 73.01 4.07 5a Yes FTTC
SWBNP BRIDGEND CF314SW {SWBNP}{p21} 0 100 4.07 5a Yes FTTC
Please Click On any Text in Blue as that automatically links to information.
PC (NDEGR)
Similar Messages
-
BT Infinity Rollout Schedule Confusion
I recently switched over from Orange Broadband to BT Total Broadband and although I am completely happy with my current package I am really confused why I couldn't go straight onto BT Infinity as my exchange is definitately capable of it because one of the main reasons I switched from Orange Broadband was after I spoke to a BT engineer who was installing BT Infinity in a house oposite to me but for some reason BT Infinity was not offered as an option for my property and I guess there is some kind of rollout schedule for BT Infinity and at some point my land line will be flagged as BT Infinity capable? It just seems like false economy to me as for me to move to BT Infinity now will mean I need to rip out all my BT Total Broadband kit or am I missing the point?
Best Regards
Paul HadrillIf you check your exchange here http://www.samknows.com/broadband/exchange_search you can see if FTTC
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’. -
KABA connection issue - program not registered
I am trying to troubleshoot a connection error between SAP and KABA. I have the RFC created in SAP and when I test the connection I get a program not registered. The KABA "amsproc" service on the KABA side has been restarted, we have occasionally received a password locked message in the SAP system log after restarting the KABA service (I believe this means SAP and KABA are communicating). We have since reset the password, but we can not successfully test the RFC and when attempting to send IDOC's out we get the program not registered error. Is there something on the SAP side that needs to be done to register the program or is starting the service on the KABA side going to register the program with SAP? Any assistance would be appreciated.
Hi,
In Central Management Console ie, Admin application of BOE, you need to configure the BW system. Use the below URL,
http://<serverhostname>:<port>/CmcApp
After logging in Select the Authentication and SAP as authentication type. Regarding how to configure, follow the configuration steps mentioned in the below article:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a00ee3b2-5283-2b10-f1bf-8c6413e0898f
Once you import the roles with the above configuration, the user with which you are validating the RFC connection will be imported in the BOE.
Now, verify the RFC in the BW system.
Regards,
Noor. -
Help: can not regist application in HP-UX 11.0
My application work fine in iAS SP3 for Win2000, but when I deployed it to
HP-UX 11.0, It can not regist the application in HP-UX.
can any onr help me, thanks
Lu yanqiang
the error message is:
HotSpot VM warning: Setting of property "java.compiler" is ignored
creating engine class space...
loading jx2util...
loading jx2util...done
Connected to LDAP server on websvr.sh-catcher.com port 389
com.kivasoft.engine.EngineClassLoaderNonVersionable: EngineClassLoader
constructer called
com.kivasoft.engine.EngineClassLoaderNonVersionable: ! NVCL CREATED at:
com.kivasoft.engine.EngineClassLoaderNonVersionable@1fbe93
ECS initializing engine class loader instance.
com.kivasoft.engine.EngineClassLoader: EngineClassLoader constructer called
initGDSKey: GDSKey_Base
initGDSKey- just put : com.kivasoft.IGDSKey_Base
key=com.kivasoft.gds.GDSKey@41cd1f
initGDSKey: GDSKey_Root
initGDSKey- just put : com.kivasoft.IGDSKey_Root
key=com.kivasoft.gds.GDSKey@31f71a
initGDSKey: GDSKey_Current
initGDSKey- just put : com.kivasoft.IGDSKey_Current
key=com.kivasoft.gds.GDSKey@5601ea
initGDSKey: GDSKey_CurrentEngine
initGDSKey- just put : com.kivasoft.IGDSKey_CurrentEngine
key=com.kivasoft.gds.GDSKey@17d257
context= com.kivasoft.context.Context@6ee36c
resolve property: GX.path.class GX_CLASSPATH SYSTEM_JAVA null
resolve value: /opt/iplanet/ias6/ias/APPS
resolve property: GX.path.class.core GX_CLASSPATH_CORE SYSTEM_JAVA
java.;com.kivasoft.;gx.
resolve value:
java.;com.kivasoft.;gx.;com.netscape.;javax.;netscape.ldap.;netscape.tooluti
l.
resolve property: GX.versionable GX_VERSIONABLE SYSTEM_JAVA
com.kivasoft.engine.IVersionable
property not in GDS
resolve value: com.kivasoft.engine.IVersionable
resolve property: GX.all.versionable GX_ALL_VERSIONABLE SYSTEM_JAVA 0
property not in GDS
resolve value: 0
resolve property: GX.taskmanager.period GX_TASKMANAGER_PERIOD SYSTEM_JAVA 10
property not in GDS
resolve value: 10
resolve property: GX.versionable.if.extends GX_VERSIONABLE_IF_EXTENDS
SYSTEM_JAVA javax.servlet.GenericServlet;javax.servlet.http.HttpServlet
property not in GDS
resolve value: javax.servlet.GenericServlet;javax.servlet.http.HttpServlet
resolve property: GX.versionable.if.implements GX_VERSIONABLE_IF_IMPLEMENTS
SYSTEM_JAVA javax.servlet.Servlet
property not in GDS
resolve value: javax.servlet.Servlet
class_dir 4 AppPath: /opt/iplanet/ias6/ias/APPS/compiled_jsp
loading component...{7ee76a00-a999-11d1-a16f-006097594151}
getting threadLocal obj
loading component...{91f29740-16e1-11cf-96c8-0020afed9a65}
getting threadLocal obj
com.kivasoft.engine.EngineClassLoader: Enter ECL loadClass:
com.kivasoft.thread.ModuleThread
com.kivasoft.engine.EngineClassLoader: Class
com.kivasoft.thread.ModuleThread appears to be a core class
com.kivasoft.engine.EngineClassLoader: Using primordial classloader to load
com.kivasoft.thread.ModuleThread
com.kivasoft.engine.EngineClassLoader: Entering
loadClass_primordial(className)
com.kivasoft.engine.EngineClassLoader: Class
com.kivasoft.thread.ModuleThread loaded by primordial CL
registered module... com.kivasoft.IModuleThread
loading component...{91f29620-16e1-11cf-96c8-0020afed9a65}
getting threadLocal obj
com.kivasoft.engine.EngineClassLoader: Enter ECL loadClass:
com.kivasoft.bind.BinderJ
com.kivasoft.engine.EngineClassLoader: Class com.kivasoft.bind.BinderJ
appears to be a core class
com.kivasoft.engine.EngineClassLoader: Using primordial classloader to load
com.kivasoft.bind.BinderJ
com.kivasoft.engine.EngineClassLoader: Entering
loadClass_primordial(className)
com.kivasoft.engine.EngineClassLoader: Class com.kivasoft.bind.BinderJ
loaded by primordial CL
loading component...{ed049d80-b936-1548-e481-080020721767}
getting threadLocal obj
com.kivasoft.engine.EngineClassLoader: Enter ECL loadClass:
com.kivasoft.eb.EJBBinder
com.kivasoft.engine.EngineClassLoader: Class com.kivasoft.eb.EJBBinder
appears to be a core class
com.kivasoft.engine.EngineClassLoader: Using primordial classloader to load
com.kivasoft.eb.EJBBinder
com.kivasoft.engine.EngineClassLoader: Entering
loadClass_primordial(className)
com.kivasoft.engine.EngineClassLoader: Class com.kivasoft.eb.EJBBinder
loaded by primordial CL
EJBBinder: binder is GOOD..
EJBBinder: context set obj for IID_IGXEBBinder
loading component...{a84f0507-a912-11cf-aa6c-524153480000}
getting threadLocal obj
com.kivasoft.engine.EngineClassLoader: Enter ECL loadClass:
com.kivasoft.gds.GDSModule
com.kivasoft.engine.EngineClassLoader: Class com.kivasoft.gds.GDSModule
appears to be a core class
com.kivasoft.engine.EngineClassLoader: Using primordial classloader to load
com.kivasoft.gds.GDSModule
com.kivasoft.engine.EngineClassLoader: Entering
loadClass_primordial(className)
com.kivasoft.engine.EngineClassLoader: Class com.kivasoft.gds.GDSModule
loaded by primordial CL
registered module... com.kivasoft.IGDSModule
loading component...{c70f2c00-abeb-11d0-b4e5-00a024e006be}
getting threadLocal obj
com.kivasoft.engine.EngineClassLoader: Enter ECL loadClass:
com.kivasoft.bind.BinderBase
com.kivasoft.engine.EngineClassLoader: Class com.kivasoft.bind.BinderBase
appears to be a core class
com.kivasoft.engine.EngineClassLoader: Using primordial classloader to load
com.kivasoft.bind.BinderBase
com.kivasoft.engine.EngineClassLoader: Entering
loadClass_primordial(className)
com.kivasoft.engine.EngineClassLoader: Class com.kivasoft.bind.BinderBase
loaded by primordial CL
loading component...{c70f2d00-abeb-11d0-b4e5-00a024e006be}
getting threadLocal obj
com.kivasoft.engine.EngineClassLoader: Enter ECL loadClass:
com.kivasoft.bind.BinderBase
com.kivasoft.engine.EngineClassLoader: Got com.kivasoft.bind.BinderBase from
PCL cache
loading component...{c70f1a00-abeb-11d0-b4e5-00a024e006be}
getting threadLocal obj
com.kivasoft.engine.EngineClassLoader: Enter ECL loadClass:
com.kivasoft.principal.PrincipalModule
com.kivasoft.engine.EngineClassLoader: Class
com.kivasoft.principal.PrincipalModule appears to be a core class
com.kivasoft.engine.EngineClassLoader: Using primordial classloader to load
com.kivasoft.principal.PrincipalModule
com.kivasoft.engine.EngineClassLoader: Entering
loadClass_primordial(className)
com.kivasoft.engine.EngineClassLoader: Class
com.kivasoft.principal.PrincipalModule loaded by primordial CL
registered module... com.kivasoft.IPrincipalModule
loading component...{35069f7a-0a09-1406-8f1a-0800208055c0}
getting threadLocal obj
com.kivasoft.engine.EngineClassLoader: Enter ECL loadClass:
com.kivasoft.bind.BinderBase
com.kivasoft.engine.EngineClassLoader: Got com.kivasoft.bind.BinderBase from
PCL cache
loading component...{e7d37500-23bf-11d1-b6c2-0060082beecf}
getting threadLocal obj
com.kivasoft.engine.EngineClassLoader: Enter ECL loadClass:
com.kivasoft.bind.BinderBase
com.kivasoft.engine.EngineClassLoader: Got com.kivasoft.bind.BinderBase from
PCL cache
loading component...{e7d37540-23bf-11d1-b6c2-0060082beecf}
getting threadLocal obj
com.kivasoft.engine.EngineClassLoader: Enter ECL loadClass:
com.kivasoft.bind.BinderBase
com.kivasoft.engine.EngineClassLoader: Got com.kivasoft.bind.BinderBase from
PCL cache
loading component...{be5cfde0-cd9e-11d1-94aa-0060083a5082}
getting threadLocal obj
com.kivasoft.engine.EngineClassLoader: Enter ECL loadClass:
com.kivasoft.eb.EBModule
com.kivasoft.engine.EngineClassLoader: Class com.kivasoft.eb.EBModule
appears to be a core class
com.kivasoft.engine.EngineClassLoader: Using primordial classloader to load
com.kivasoft.eb.EBModule
com.kivasoft.engine.EngineClassLoader: Entering
loadClass_primordial(className)
com.kivasoft.engine.EngineClassLoader: Class com.kivasoft.eb.EBModule loaded
by primordial CL
registered module... com.kivasoft.IEBModule
The current input file= testdb.xml
About to start xml -> descriptor conversion process
xmlToDescriptor- file name=testdb.xml
Set PubId= -//Sun Microsystems, Inc.//DTD J2EE Application 1.2//EN to uri=
file://localhost/opt/iplanet/ias6/ias/APPS/application_1_2.dtd
Set PubId= -//Sun Microsystems, Inc.//DTD J2EE Application Client 1.2//EN to
uri= file://localhost/opt/iplanet/ias6/ias/APPS/application-client_1_2.dtd
Set PubId= -//Sun Microsystems, Inc.//DTD Web Application 2.2//EN to uri=
file://localhost/opt/iplanet/ias6/ias/APPS/web-app_2_2.dtd
Set PubId= -//Sun Microsystems, Inc.//DTD JSP Tag Library 1.1//EN to uri=
file://localhost/opt/iplanet/ias6/ias/APPS/web-jsptaglibrary_1_1.dtd
Set PubId= -//Sun Microsystems, Inc.//DTD Enterprise JavaBeans 1.1//EN to
uri= file://localhost/opt/iplanet/ias6/ias/APPS/ejb-jar_1_1.dtd
Set PubId= -//Sun Microsystems, Inc.//DTD iAS J2EE Application Client
1.0//EN to uri=
file://localhost/opt/iplanet/ias6/ias/APPS/IASjava_client_jar_1_0.dtd
Set PubId= -//Sun Microsystems, Inc.//DTD iAS Web Application 1.0//EN to
uri= file://localhost/opt/iplanet/ias6/ias/APPS/IASWebApp_1_0.dtd
Set PubId= -//Sun Microsystems, Inc.//DTD iAS Enterprise JavaBeans 1.0//EN
to uri= file://localhost/opt/iplanet/ias6/ias/APPS/IASEjb_jar_1_0.dtd
Set PubId= -//Sun Microsystems, Inc.//DTD iAS Persistence Manager 1.0//EN to
uri=
file://localhost/opt/iplanet/ias6/ias/APPS/IASPersistence_manager_1_0.dtd
Set PubId= -//Sun Microsystems, Inc.//DTD iAS Datasource 1.0//EN to uri=
file://localhost/opt/iplanet/ias6/ias/APPS/IASDatasource_1_0.dtd
servlet name = testdb
!!! parseWebAppFromDOM() just put in setServlet name = testdb
Set PubId= -//Sun Microsystems, Inc.//DTD J2EE Application 1.2//EN to uri=
file://localhost/opt/iplanet/ias6/ias/APPS/application_1_2.dtd
Set PubId= -//Sun Microsystems, Inc.//DTD J2EE Application Client 1.2//EN to
uri= file://localhost/opt/iplanet/ias6/ias/APPS/application-client_1_2.dtd
Set PubId= -//Sun Microsystems, Inc.//DTD Web Application 2.2//EN to uri=
file://localhost/opt/iplanet/ias6/ias/APPS/web-app_2_2.dtd
Set PubId= -//Sun Microsystems, Inc.//DTD JSP Tag Library 1.1//EN to uri=
file://localhost/opt/iplanet/ias6/ias/APPS/web-jsptaglibrary_1_1.dtd
Set PubId= -//Sun Microsystems, Inc.//DTD Enterprise JavaBeans 1.1//EN to
uri= file://localhost/opt/iplanet/ias6/ias/APPS/ejb-jar_1_1.dtd
Set PubId= -//Sun Microsystems, Inc.//DTD iAS J2EE Application Client
1.0//EN to uri=
file://localhost/opt/iplanet/ias6/ias/APPS/IASjava_client_jar_1_0.dtd
Set PubId= -//Sun Microsystems, Inc.//DTD iAS Web Application 1.0//EN to
uri= file://localhost/opt/iplanet/ias6/ias/APPS/IASWebApp_1_0.dtd
Set PubId= -//Sun Microsystems, Inc.//DTD iAS Enterprise JavaBeans 1.0//EN
to uri= file://localhost/opt/iplanet/ias6/ias/APPS/IASEjb_jar_1_0.dtd
Set PubId= -//Sun Microsystems, Inc.//DTD iAS Persistence Manager 1.0//EN to
uri=
file://localhost/opt/iplanet/ias6/ias/APPS/IASPersistence_manager_1_0.dtd
Set PubId= -//Sun Microsystems, Inc.//DTD iAS Datasource 1.0//EN to uri=
file://localhost/opt/iplanet/ias6/ias/APPS/IASDatasource_1_0.dtd
!!! handleIASServlet(): Get servlet name= testdb
AppComponentDescriptor: com.netscape.server.deployment.WebAppDescriptor
All EnvEntries name:
All Ejb-refs:
All Resource-refs:
WebApp package name = testdb
Enter setupPluginInfoInGDS()
creating ServletPatternTrans entry, url= /testdb
webapp ContextRoot= null
Enter getAllServlets,registeredServletNames.size= 0
BaseKey= com.kivasoft.gds.GDSKey@41cd1f
BaseKey= com.kivasoft.gds.GDSKey@41cd1f
Enter getAllServlets,registeredServletNames.size= 0
BaseKey= com.kivasoft.gds.GDSKey@41cd1f
Enter getAllServlets,registeredServletNames.size= 0
[01/Nov/2001 16:00:04:5] info: GDS-007: finished a registry load
--- now put Web-app component descrptor into GDS
webAppName = testdb
Enter getAllServlets,registeredServletNames.size= 0
Enter getAllServlets,registeredServletNames.size= 0
getClassDefGDSKeyByGuid: name to match=
{eea893d3-d646-4f8e-8c6d-6f92a8563c46}
BaseKey= com.kivasoft.gds.GDSKey@41cd1f
getServletGDSKeyByGuid: return key: com.kivasoft.gds.GDSKey@540408
BaseKey= com.kivasoft.gds.GDSKey@41cd1f
getClassImpGDSKeyByGuid: name to match=
{eea893d3-d646-4f8e-8c6d-6f92a8563c46}
BaseKey= com.kivasoft.gds.GDSKey@41cd1f
Now do some verification step and regenrate the web-app.xml.out file from
GDS data
getWebAppGDSKeyByPackageName: name to match= testdb
got key to webapp= testdb
enter WebAppCompGDSUtil.getDescriptorFromGDSByKey()
About to process the <servlet-mapping> element
GDSvalue name= /System/StaticServlet
GDSvalue val= StaticServlet
GDSvalue name= /System/JSPRunnerSticky
GDSvalue val= JSPRunnerSticky
GDSvalue name= /System/JSPRunner
GDSvalue val= JSPRunner
GDSvalue name= /System/FormAuthServlet
GDSvalue val= FormAuthServlet
GDSvalue name= /System/BasicAuthServlet
GDSvalue val= BasicAuthServlet
GDSvalue name= /System/CertAuthServlet
GDSvalue val= CertAuthServlet
GDSvalue name= /System/SessionInvalidator
GDSvalue val= SessionInvalidator
GDSvalue name= /fortune/fortune
GDSvalue val= FortuneServlet
GDSvalue name= /web/StaticServlet
GDSvalue val= StaticServlet
GDSvalue name= /web/JSPRunnerSticky
GDSvalue val= JSPRunnerSticky
GDSvalue name= /web/JSPRunner
GDSvalue val= JSPRunner
GDSvalue name= /web/FormAuthServlet
GDSvalue val= FormAuthServlet
GDSvalue name= /web/BasicAuthServlet
GDSvalue val= BasicAuthServlet
GDSvalue name= /web/CertAuthServlet
GDSvalue val= CertAuthServlet
GDSvalue name= /web/SessionInvalidator
GDSvalue val= SessionInvalidator
GDSvalue name= /web/AdderAlias
GDSvalue val= AdderServlet
GDSvalue name= /testdb/testdb
GDSvalue val= testdb
getServletMappingFromGDS: url= /testdb, servlet= testdb
About to process the context-param
[01/Nov/2001 16:00:06:7] info: GDS-007: finished a registry load
About to process the mime-mapping
About to process the servlets
GDSvalue name= testdb
GDSvalue val= {eea893d3-d646-4f8e-8c6d-6f92a8563c46}
GDSvalue name= testdb.jsp
GDSvalue val= {eea893d3-d646-4f8e-8c6d-6f92a8563c46}
The returned hashtable for servlets have: 2 entries
About to process the servlet name= testdb.jsp
About to process the servlet name= testdb
About to process the tld
The returned vector for taglib have: 0 entries
Finished getting a wd from gd s!!!
Now ready to write out WebApp xml file
descriptorToXml: about to get all servlets
Enter getAllServlets,registeredServletNames.size= 2
DescriptorManager.getServletByGuidStr, ctx=
com.kivasoft.context.Context@6ee36c
Enter getServletFromGDS
getClassDefGDSKeyByGuid: name to match=
{eea893d3-d646-4f8e-8c6d-6f92a8563c46}
BaseKey= com.kivasoft.gds.GDSKey@41cd1f
getServletGDSKeyByGuid: return key: com.kivasoft.gds.GDSKey@76c74b
load-on-startup value from GDS= 0
number-of-singles value from GDS= 10
DescriptorManager.getServletByGuidStr, ctx=
com.kivasoft.context.Context@6ee36c
write Xml to output file: web.xml.out
Finished writing out j2ee xml file
Enter getAllServlets,registeredServletNames.size= 2
write Xml to output file: ias-web.xml.out
Finished writing out IAS xml file
Extracting JSPs from testdb.xml to /opt/iplanet/ias6/ias/APPS/
Processing input WAR 1
Processing input WARi 21 testdb.xml
Encountered exception java.util.zip.ZipException processing input file testdHi,
What is the version of app server on HP UX ? How did you deploy on the app
server in HP UX using command line deployment or GUI tool ? Where are these
errors shooting from, are these coming at the time of deployment or thrown at
runtime ? What is the application type that you are trying to deploy ?, if
possible send me the kxs and kjs log files please.
Regards
Raj
lu yanqiang wrote:
My application work fine in iAS SP3 for Win2000, but when I deployed it to
HP-UX 11.0, It can not regist the application in HP-UX.
can any onr help me, thanks
Lu yanqiang
the error message is:
HotSpot VM warning: Setting of property "java.compiler" is ignored
creating engine class space...
loading jx2util...
loading jx2util...done
Connected to LDAP server on websvr.sh-catcher.com port 389
com.kivasoft.engine.EngineClassLoaderNonVersionable: EngineClassLoader
constructer called
com.kivasoft.engine.EngineClassLoaderNonVersionable: ! NVCL CREATED at:
com.kivasoft.engine.EngineClassLoaderNonVersionable@1fbe93
ECS initializing engine class loader instance.
com.kivasoft.engine.EngineClassLoader: EngineClassLoader constructer called
initGDSKey: GDSKey_Base
initGDSKey- just put : com.kivasoft.IGDSKey_Base
key=com.kivasoft.gds.GDSKey@41cd1f
initGDSKey: GDSKey_Root
initGDSKey- just put : com.kivasoft.IGDSKey_Root
key=com.kivasoft.gds.GDSKey@31f71a
initGDSKey: GDSKey_Current
initGDSKey- just put : com.kivasoft.IGDSKey_Current
key=com.kivasoft.gds.GDSKey@5601ea
initGDSKey: GDSKey_CurrentEngine
initGDSKey- just put : com.kivasoft.IGDSKey_CurrentEngine
key=com.kivasoft.gds.GDSKey@17d257
context= com.kivasoft.context.Context@6ee36c
resolve property: GX.path.class GX_CLASSPATH SYSTEM_JAVA null
resolve value: /opt/iplanet/ias6/ias/APPS
resolve property: GX.path.class.core GX_CLASSPATH_CORE SYSTEM_JAVA
java.;com.kivasoft.;gx.
resolve value:
java.;com.kivasoft.;gx.;com.netscape.;javax.;netscape.ldap.;netscape.tooluti
l.
resolve property: GX.versionable GX_VERSIONABLE SYSTEM_JAVA
com.kivasoft.engine.IVersionable
property not in GDS
resolve value: com.kivasoft.engine.IVersionable
resolve property: GX.all.versionable GX_ALL_VERSIONABLE SYSTEM_JAVA 0
property not in GDS
resolve value: 0
resolve property: GX.taskmanager.period GX_TASKMANAGER_PERIOD SYSTEM_JAVA 10
property not in GDS
resolve value: 10
resolve property: GX.versionable.if.extends GX_VERSIONABLE_IF_EXTENDS
SYSTEM_JAVA javax.servlet.GenericServlet;javax.servlet.http.HttpServlet
property not in GDS
resolve value: javax.servlet.GenericServlet;javax.servlet.http.HttpServlet
resolve property: GX.versionable.if.implements GX_VERSIONABLE_IF_IMPLEMENTS
SYSTEM_JAVA javax.servlet.Servlet
property not in GDS
resolve value: javax.servlet.Servlet
class_dir 4 AppPath: /opt/iplanet/ias6/ias/APPS/compiled_jsp
loading component...{7ee76a00-a999-11d1-a16f-006097594151}
getting threadLocal obj
loading component...{91f29740-16e1-11cf-96c8-0020afed9a65}
getting threadLocal obj
com.kivasoft.engine.EngineClassLoader: Enter ECL loadClass:
com.kivasoft.thread.ModuleThread
com.kivasoft.engine.EngineClassLoader: Class
com.kivasoft.thread.ModuleThread appears to be a core class
com.kivasoft.engine.EngineClassLoader: Using primordial classloader to load
com.kivasoft.thread.ModuleThread
com.kivasoft.engine.EngineClassLoader: Entering
loadClass_primordial(className)
com.kivasoft.engine.EngineClassLoader: Class
com.kivasoft.thread.ModuleThread loaded by primordial CL
registered module... com.kivasoft.IModuleThread
loading component...{91f29620-16e1-11cf-96c8-0020afed9a65}
getting threadLocal obj
com.kivasoft.engine.EngineClassLoader: Enter ECL loadClass:
com.kivasoft.bind.BinderJ
com.kivasoft.engine.EngineClassLoader: Class com.kivasoft.bind.BinderJ
appears to be a core class
com.kivasoft.engine.EngineClassLoader: Using primordial classloader to load
com.kivasoft.bind.BinderJ
com.kivasoft.engine.EngineClassLoader: Entering
loadClass_primordial(className)
com.kivasoft.engine.EngineClassLoader: Class com.kivasoft.bind.BinderJ
loaded by primordial CL
loading component...{ed049d80-b936-1548-e481-080020721767}
getting threadLocal obj
com.kivasoft.engine.EngineClassLoader: Enter ECL loadClass:
com.kivasoft.eb.EJBBinder
com.kivasoft.engine.EngineClassLoader: Class com.kivasoft.eb.EJBBinder
appears to be a core class
com.kivasoft.engine.EngineClassLoader: Using primordial classloader to load
com.kivasoft.eb.EJBBinder
com.kivasoft.engine.EngineClassLoader: Entering
loadClass_primordial(className)
com.kivasoft.engine.EngineClassLoader: Class com.kivasoft.eb.EJBBinder
loaded by primordial CL
EJBBinder: binder is GOOD..
EJBBinder: context set obj for IID_IGXEBBinder
loading component...{a84f0507-a912-11cf-aa6c-524153480000}
getting threadLocal obj
com.kivasoft.engine.EngineClassLoader: Enter ECL loadClass:
com.kivasoft.gds.GDSModule
com.kivasoft.engine.EngineClassLoader: Class com.kivasoft.gds.GDSModule
appears to be a core class
com.kivasoft.engine.EngineClassLoader: Using primordial classloader to load
com.kivasoft.gds.GDSModule
com.kivasoft.engine.EngineClassLoader: Entering
loadClass_primordial(className)
com.kivasoft.engine.EngineClassLoader: Class com.kivasoft.gds.GDSModule
loaded by primordial CL
registered module... com.kivasoft.IGDSModule
loading component...{c70f2c00-abeb-11d0-b4e5-00a024e006be}
getting threadLocal obj
com.kivasoft.engine.EngineClassLoader: Enter ECL loadClass:
com.kivasoft.bind.BinderBase
com.kivasoft.engine.EngineClassLoader: Class com.kivasoft.bind.BinderBase
appears to be a core class
com.kivasoft.engine.EngineClassLoader: Using primordial classloader to load
com.kivasoft.bind.BinderBase
com.kivasoft.engine.EngineClassLoader: Entering
loadClass_primordial(className)
com.kivasoft.engine.EngineClassLoader: Class com.kivasoft.bind.BinderBase
loaded by primordial CL
loading component...{c70f2d00-abeb-11d0-b4e5-00a024e006be}
getting threadLocal obj
com.kivasoft.engine.EngineClassLoader: Enter ECL loadClass:
com.kivasoft.bind.BinderBase
com.kivasoft.engine.EngineClassLoader: Got com.kivasoft.bind.BinderBase from
PCL cache
loading component...{c70f1a00-abeb-11d0-b4e5-00a024e006be}
getting threadLocal obj
com.kivasoft.engine.EngineClassLoader: Enter ECL loadClass:
com.kivasoft.principal.PrincipalModule
com.kivasoft.engine.EngineClassLoader: Class
com.kivasoft.principal.PrincipalModule appears to be a core class
com.kivasoft.engine.EngineClassLoader: Using primordial classloader to load
com.kivasoft.principal.PrincipalModule
com.kivasoft.engine.EngineClassLoader: Entering
loadClass_primordial(className)
com.kivasoft.engine.EngineClassLoader: Class
com.kivasoft.principal.PrincipalModule loaded by primordial CL
registered module... com.kivasoft.IPrincipalModule
loading component...{35069f7a-0a09-1406-8f1a-0800208055c0}
getting threadLocal obj
com.kivasoft.engine.EngineClassLoader: Enter ECL loadClass:
com.kivasoft.bind.BinderBase
com.kivasoft.engine.EngineClassLoader: Got com.kivasoft.bind.BinderBase from
PCL cache
loading component...{e7d37500-23bf-11d1-b6c2-0060082beecf}
getting threadLocal obj
com.kivasoft.engine.EngineClassLoader: Enter ECL loadClass:
com.kivasoft.bind.BinderBase
com.kivasoft.engine.EngineClassLoader: Got com.kivasoft.bind.BinderBase from
PCL cache
loading component...{e7d37540-23bf-11d1-b6c2-0060082beecf}
getting threadLocal obj
com.kivasoft.engine.EngineClassLoader: Enter ECL loadClass:
com.kivasoft.bind.BinderBase
com.kivasoft.engine.EngineClassLoader: Got com.kivasoft.bind.BinderBase from
PCL cache
loading component...{be5cfde0-cd9e-11d1-94aa-0060083a5082}
getting threadLocal obj
com.kivasoft.engine.EngineClassLoader: Enter ECL loadClass:
com.kivasoft.eb.EBModule
com.kivasoft.engine.EngineClassLoader: Class com.kivasoft.eb.EBModule
appears to be a core class
com.kivasoft.engine.EngineClassLoader: Using primordial classloader to load
com.kivasoft.eb.EBModule
com.kivasoft.engine.EngineClassLoader: Entering
loadClass_primordial(className)
com.kivasoft.engine.EngineClassLoader: Class com.kivasoft.eb.EBModule loaded
by primordial CL
registered module... com.kivasoft.IEBModule
The current input file= testdb.xml
About to start xml -> descriptor conversion process
xmlToDescriptor- file name=testdb.xml
Set PubId= -//Sun Microsystems, Inc.//DTD J2EE Application 1.2//EN to uri=
file://localhost/opt/iplanet/ias6/ias/APPS/application_1_2.dtd
Set PubId= -//Sun Microsystems, Inc.//DTD J2EE Application Client 1.2//EN to
uri= file://localhost/opt/iplanet/ias6/ias/APPS/application-client_1_2.dtd
Set PubId= -//Sun Microsystems, Inc.//DTD Web Application 2.2//EN to uri=
file://localhost/opt/iplanet/ias6/ias/APPS/web-app_2_2.dtd
Set PubId= -//Sun Microsystems, Inc.//DTD JSP Tag Library 1.1//EN to uri=
file://localhost/opt/iplanet/ias6/ias/APPS/web-jsptaglibrary_1_1.dtd
Set PubId= -//Sun Microsystems, Inc.//DTD Enterprise JavaBeans 1.1//EN to
uri= file://localhost/opt/iplanet/ias6/ias/APPS/ejb-jar_1_1.dtd
Set PubId= -//Sun Microsystems, Inc.//DTD iAS J2EE Application Client
1.0//EN to uri=
file://localhost/opt/iplanet/ias6/ias/APPS/IASjava_client_jar_1_0.dtd
Set PubId= -//Sun Microsystems, Inc.//DTD iAS Web Application 1.0//EN to
uri= file://localhost/opt/iplanet/ias6/ias/APPS/IASWebApp_1_0.dtd
Set PubId= -//Sun Microsystems, Inc.//DTD iAS Enterprise JavaBeans 1.0//EN
to uri= file://localhost/opt/iplanet/ias6/ias/APPS/IASEjb_jar_1_0.dtd
Set PubId= -//Sun Microsystems, Inc.//DTD iAS Persistence Manager 1.0//EN to
uri=
file://localhost/opt/iplanet/ias6/ias/APPS/IASPersistence_manager_1_0.dtd
Set PubId= -//Sun Microsystems, Inc.//DTD iAS Datasource 1.0//EN to uri=
file://localhost/opt/iplanet/ias6/ias/APPS/IASDatasource_1_0.dtd
servlet name = testdb
!!! parseWebAppFromDOM() just put in setServlet name = testdb
Set PubId= -//Sun Microsystems, Inc.//DTD J2EE Application 1.2//EN to uri=
file://localhost/opt/iplanet/ias6/ias/APPS/application_1_2.dtd
Set PubId= -//Sun Microsystems, Inc.//DTD J2EE Application Client 1.2//EN to
uri= file://localhost/opt/iplanet/ias6/ias/APPS/application-client_1_2.dtd
Set PubId= -//Sun Microsystems, Inc.//DTD Web Application 2.2//EN to uri=
file://localhost/opt/iplanet/ias6/ias/APPS/web-app_2_2.dtd
Set PubId= -//Sun Microsystems, Inc.//DTD JSP Tag Library 1.1//EN to uri=
file://localhost/opt/iplanet/ias6/ias/APPS/web-jsptaglibrary_1_1.dtd
Set PubId= -//Sun Microsystems, Inc.//DTD Enterprise JavaBeans 1.1//EN to
uri= file://localhost/opt/iplanet/ias6/ias/APPS/ejb-jar_1_1.dtd
Set PubId= -//Sun Microsystems, Inc.//DTD iAS J2EE Application Client
1.0//EN to uri=
file://localhost/opt/iplanet/ias6/ias/APPS/IASjava_client_jar_1_0.dtd
Set PubId= -//Sun Microsystems, Inc.//DTD iAS Web Application 1.0//EN to
uri= file://localhost/opt/iplanet/ias6/ias/APPS/IASWebApp_1_0.dtd
Set PubId= -//Sun Microsystems, Inc.//DTD iAS Enterprise JavaBeans 1.0//EN
to uri= file://localhost/opt/iplanet/ias6/ias/APPS/IASEjb_jar_1_0.dtd
Set PubId= -//Sun Microsystems, Inc.//DTD iAS Persistence Manager 1.0//EN to
uri=
file://localhost/opt/iplanet/ias6/ias/APPS/IASPersistence_manager_1_0.dtd
Set PubId= -//Sun Microsystems, Inc.//DTD iAS Datasource 1.0//EN to uri=
file://localhost/opt/iplanet/ias6/ias/APPS/IASDatasource_1_0.dtd
!!! handleIASServlet(): Get servlet name= testdb
AppComponentDescriptor: com.netscape.server.deployment.WebAppDescriptor
All EnvEntries name:
All Ejb-refs:
All Resource-refs:
WebApp package name = testdb
Enter setupPluginInfoInGDS()
creating ServletPatternTrans entry, url= /testdb
webapp ContextRoot= null
Enter getAllServlets,registeredServletNames.size= 0
BaseKey= com.kivasoft.gds.GDSKey@41cd1f
BaseKey= com.kivasoft.gds.GDSKey@41cd1f
Enter getAllServlets,registeredServletNames.size= 0
BaseKey= com.kivasoft.gds.GDSKey@41cd1f
Enter getAllServlets,registeredServletNames.size= 0
[01/Nov/2001 16:00:04:5] info: GDS-007: finished a registry load
--- now put Web-app component descrptor into GDS
webAppName = testdb
Enter getAllServlets,registeredServletNames.size= 0
Enter getAllServlets,registeredServletNames.size= 0
getClassDefGDSKeyByGuid: name to match=
{eea893d3-d646-4f8e-8c6d-6f92a8563c46}
BaseKey= com.kivasoft.gds.GDSKey@41cd1f
getServletGDSKeyByGuid: return key: com.kivasoft.gds.GDSKey@540408
BaseKey= com.kivasoft.gds.GDSKey@41cd1f
getClassImpGDSKeyByGuid: name to match=
{eea893d3-d646-4f8e-8c6d-6f92a8563c46}
BaseKey= com.kivasoft.gds.GDSKey@41cd1f
Now do some verification step and regenrate the web-app.xml.out file from
GDS data
getWebAppGDSKeyByPackageName: name to match= testdb
got key to webapp= testdb
enter WebAppCompGDSUtil.getDescriptorFromGDSByKey()
About to process the <servlet-mapping> element
GDSvalue name= /System/StaticServlet
GDSvalue val= StaticServlet
GDSvalue name= /System/JSPRunnerSticky
GDSvalue val= JSPRunnerSticky
GDSvalue name= /System/JSPRunner
GDSvalue val= JSPRunner
GDSvalue name= /System/FormAuthServlet
GDSvalue val= FormAuthServlet
GDSvalue name= /System/BasicAuthServlet
GDSvalue val= BasicAuthServlet
GDSvalue name= /System/CertAuthServlet
GDSvalue val= CertAuthServlet
GDSvalue name= /System/SessionInvalidator
GDSvalue val= SessionInvalidator
GDSvalue name= /fortune/fortune
GDSvalue val= FortuneServlet
GDSvalue name= /web/StaticServlet
GDSvalue val= StaticServlet
GDSvalue name= /web/JSPRunnerSticky
GDSvalue val= JSPRunnerSticky
GDSvalue name= /web/JSPRunner
GDSvalue val= JSPRunner
GDSvalue name= /web/FormAuthServlet
GDSvalue val= FormAuthServlet
GDSvalue name= /web/BasicAuthServlet
GDSvalue val= BasicAuthServlet
GDSvalue name= /web/CertAuthServlet
GDSvalue val= CertAuthServlet
GDSvalue name= /web/SessionInvalidator
GDSvalue val= SessionInvalidator
GDSvalue name= /web/AdderAlias
GDSvalue val= AdderServlet
GDSvalue name= /testdb/testdb
GDSvalue val= testdb
getServletMappingFromGDS: url= /testdb, servlet= testdb
About to process the context-param
[01/Nov/2001 16:00:06:7] info: GDS-007: finished a registry load
About to process the mime-mapping
About to process the servlets
GDSvalue name= testdb
GDSvalue val= {eea893d3-d646-4f8e-8c6d-6f92a8563c46}
GDSvalue name= testdb.jsp
GDSvalue val= {eea893d3-d646-4f8e-8c6d-6f92a8563c46}
The returned hashtable for servlets have: 2 entries
About to process the servlet name= testdb.jsp
About to process the servlet name= testdb
About to process the tld
The returned vector for taglib have: 0 entries
Finished getting a wd from gd s!!!
Now ready to write out WebApp xml file
descriptorToXml: about to get all servlets
Enter getAllServlets,registeredServletNames.size= 2
DescriptorManager.getServletByGuidStr, ctx=
com.kivasoft.context.Context@6ee36c
Enter getServletFromGDS
getClassDefGDSKeyByGuid: name to match=
{eea893d3-d646-4f8e-8c6d-6f92a8563c46}
BaseKey= com.kivasoft.gds.GDSKey@41cd1f
getServletGDSKeyByGuid: return key: com.kivasoft.gds.GDSKey@76c74b
load-on-startup value from GDS= 0
number-of-singles value from GDS= 10
DescriptorManager.getServletByGuidStr, ctx=
com.kivasoft.context.Context@6ee36c
write Xml to output file: web.xml.out
Finished writing out j2ee xml file
Enter getAllServlets,registeredServletNames.size= 2
write Xml to output file: ias-web.xml.out
Finished writing out IAS xml file
Extracting JSPs from testdb.xml to /opt/iplanet/ias6/ias/APPS/
Processing input WAR 1
Processing input WARi 21 testdb.xml
Encountered exception java.util.zip.ZipException processing input file testd -
Gateway error - Program not registered
Hello,
We were getting the following error while doing a "Connection test" of a TCP/IP RFC destination:
LOCATION SAP-Gateway on host gisrxx / sapgw00
ERROR program SBCX not registered
It's an ECC 6.0 system.
I found SAP note - - 353597 - Registering a RFC program
I executed the following command as sidadm
rfcexec -aSBCX -ggisrxx -xsapgw00
But the command keeps on running on teh command prompt.
And for that duration the RFC works.
But after sometime the command ends and comes back to command prompt and the RFC doesn't work any more.
Could you tell what needs to be done to resolve this issue?
Regards,
Gautam.Hi Gautam,
Please run the program in background (Unix) or as a service (Windows).
Please go through the following forum post. This should help.
Run rfcexec as service on windows
Br,
Venky -
RFC : Transaction Program not Registered
Hi Folks,
We have registered the server program from the middleware onto SAP R/3 System and is successfully registered as per the logs. As a next step, we have logged into R/3 System, SM59, in the RFC destination (Type TCP/IP) after specifying the registered program, we have tested it(Connectivity test). The test is positive and connectivity is established successfully.
The solution was working for months and suddenly connectivity is broken.
To restore the connection, we have repeated the steps, registered the server program, tested and everything is fine.
But when we have pushed a new message, then onwards the RFC destination shows an error. "TP is not registered", Return Code 679. That is when the first message is pushed, it is de-registering the server program and running into error. All the messages got stuck in SM58 with status 'Error when opening an RFC connection'.
RFC trace shows
ERVER> Caller transaction code: (Caller Program: SAPLQOWK)
ERVER> Called function module: ARFC_RUN_NOWAIT
Error RFCIO_ERROR_SYSERROR in abrfcpic.c : 1501
CPIC-CALL: 'ThSAPOCMINIT' : cmRc=2 thRc=679
Transaction program not registered.
Please let me know for any inputs.
Thanks, SurajMy problem got solved. In the middleware, when TRFC connection is made, it has created a lock entry during the time, system was brought down for maintenance activity. When the system is brought up, then as the connection lock entry is available, then it deregistered the server program and not able to establish further connection.
To resolve the issue, we have just deleted lock file and registered server program from middleware. This time the connection was established successfully and could able to restore the message flow.
Thanks, Suraj -
TREX7.1 - Program not registered
Hi to all experts,
I am implementing TREX7.1 revision 36 (latest) which is standalone, but I encountered the error - program not registered while creating the RFC connection in admin tool. Previously the connection was working but it happens when I switched the RFCSERVER to "single thread (all hosts), deleted the old RFC connection and recreate the new one.
I have tried the following methods:
1. removed TREX and reinstall it again.
2. executed rfcexec u2013g<program id> -a<gateway host name> -x<gateway service> (it seems like nothing has been changed) - I registered it in SAP server, am I correct?
Thanks in advance.
BR,
NancyHi to all experts,
Problem solved once i restarted the SAP server and recreated the RFC connection in TREX server.
Another issue now, when i run the "python runInstallationTest.py", error occurs as below:
--> Check 01: Ping TREX Services
++----
++----
++----
STEP ³³ ACTION ³³ SPECIFICATION ³³ RESULT
++----
++----
++----
++----
++----
++----
Traceback (most recent call last):
File "/usr/sap/TX1/TRX01/exe/python_support/testbase.py", line 709, in run
ret = self.runHandler(*rest, **self.extractInheritedArgs(keys))
File "runInstallationTest.py", line 710, in runHandler
TREX_SHOW_STOPPER, webserver_unreachable, IS_QUEUE_SERVER = ps.ping()
File "runInstallationTest.py", line 275, in ping
services = HostPort4Services().getHostPort4Services()
File "runInstallationTest.py", line 88, in __init__
self.srvs = Services().getServices()
File "runInstallationTest.py", line 69, in getServices
content = Content('TREXDaemon.ini')
File "runInstallationTest.py", line 33, in __init__
self.content = self.getContent()
File "runInstallationTest.py", line 42, in getContent
raise RETURN_CODE(2, msg=msg)
RETURN_CODE: RC_NO_SETTINGS
No SAP_RETRIEVAL_PATH set in environment.
---> TEST ABORTED !!!
Is this test run very important? Any idea what is this problem about?
Many thanks in advance!
BR,
Nancy -
SAPSLDAPI_UNICODE program not registered
Hi,
Iam making RFC unicode connetion in XI3.0 , i gave corect deatils when i test connection system gives error" program not registered".
But when i execute LCRSAPRFC_UNICODE its success.Not sure why SAPSLDAPI_UNICODE giving error. I have maitained the entrys in visual administrator. Even then same problem
1. Execute transaction SM59 in the business system.
2. Choose Create.
3. Enter at least the following:
¡ RFC destination: SAPSLDAPI
¡ Connection type: T
¡ Description: SAPSLDAPI
4. Choose ENTER.
5. Choose the Technical settings tab page and do the following:
a. In the Program ID field under Registered Server Program, enter SAPSLDAPI _UNICODE.
Please suggest for this connection.
-CheersAlso..in the Visual administrator see that the destination details are correct....it doesnot seem as if the program got registered to the sap gateway.....
From the Visual Administrator for the destination, pls do a Save & Test...
Thanks,
Renjith -
RFC Error: Program not registered
Hi,
We are presently facing issue with our GTS (Quality) and Seeburger system RFC connection. While doing the testing we are getting error as below:
======> CPIC-CALL: 'ThSAPOCMINIT' : cmRc=2 thRc=679
Transaction program not registered
ABAP Programm: RSRFCPIN (Transaction: SM59)
User: TESTUSER (Client: 202)
Destination: SEEBURGER_RFC (handle: 2, , )
Error RFCIO_ERROR_SYSERROR in abrfcpic.c : 1501
CPIC-CALL: 'ThSAPOCMINIT' : cmRc=2 thRc=679
Transaction program not registered
DEST =SEEBURGER_RFC
HOST =%%RFCSERVER%%
PROG =BIS_ABC_202_DEV
GWHOST =ABC.XYZ.STU.com
GWSERV =sapgw15
I have checked RFC connection is fine. Also production systems connection are working fine.
Can anyone please help me out where to look in GTS or Seeburger to check about this issue and correct it.
Thanks & Regards,
ManishHi Sunny,
Thank you for your suggestion, actually we have tried registration using rfcexec and it works fine.
BTW, we have managed to solve this issue by de-activate the IDoc receive & send modules of websap component and activate them again.
Thanks and Regards,
Nick -
Experts,
I am unable to get connection to IGS.<SID>. I get the following error - "Program IGS.<SID> Not Registered. Secondly When I try to execute SIGS it prompts me "could not reach IGS".
I am able to register with "Rfcexec" successfully, so that i can check via sigw and see that IGS.<SID> is registerd.
But still, when i try to test the connection via sm59 for IGS_RFC_DEST it prompts me the same error.
Any valuable suggestions/comments.
Thanks,
Shailendrait depends on your SAP version. do you see IGS in SAPMMC? if not ,this means that it is standalone and can be shutdown/started with Windows services.
-
Error 'Program not registered' while testing RFC
Hi
I have created a RFC with type T. When I am testing the same through SM59, I am getting error:
Logon Connection Error
Error Details Error when opening an RFC connection
Error Details ERROR: program <program name>not registered
Error Details LOCATION: SAP-Gateway on host xxxxxx / sapgw01
Error Details DETAIL: TP <program name> not registered
Error Details COMPONENT: SAP-Gateway
Error Details COUNTER: 6268
Error Details MODULE: gwr3cpic.c
Error Details LINE: 1694
Error Details RETURN CODE: 679
Error Details SUBRC: 0
Error Details RELEASE: 700
Error Details TIME: Tue Jan 27 00:56:55 2009
Error Details VERSION: 2
Can anybody help me in this?
Thanks in advanceSomething helpful related to this
The program in the above error should be registered in the gateway for this connection test to complete successfully. The server program rfcexec is responsible for its registration on the gateway.
To register the program login into the OS level as sudo su - <sid>adm and execute the following command.
rfcexec u2013g<program id> -a<gateway host name> -x<gateway service>
rfcexec is the server program name, the <program id> can be obtained from SM59, it is case sensitive and should match with the entry in SM59. The <gateway host name> and <gateway service> can be obtained from the transaction SMGW. When this command is executed it goes to a hanging loop.
The connection will fail once this command is terminated or the user executing this command logs off
To avoid this, instead of using the above mentioned command an entry should be made in the file saprfc.ini
To do this, execute the following command
sudo su - <sid>adm
rfcexec u2013D<destination name>
<destination name> is the RFC destination name in SM59
So now we are done with registering the server program, but how do we check it is registered, once a server program is registered it is displayed in the Logged on clients in SMGW.
In transaction SMGW choose GOTO-> Logged on clients. There should be an entry for the server program in the screen that is displayed with system type Registered_TP (which indicates that the program is registered) -
Error 'Program not registered' while testing RFC - SRM to MDM / TCP/IP conn
Hello All,
While testing RFC connection in SRM, we are getting this error. This connection between SRM to MDM. Any inputs will be highly appreciated.
Error Details LOCATION: SAP-Gateway on host <hostname> / sapgw<instance no>
our server OS : windows 2008 server
We are getting error while doing connection test in SRM.
This is sm59 connection (TCP/IP ) connection.
Connection Type: T / RFC destination Name: MDM_API_CATALOG
Registered server program: hostname.MDS
I checked smgw transaction ..Logged on clients...Program id is not showing. Any hint will be helpful.
I Checked this MDM setup also.
MDS setup
In mdm server go to folder F:\usr\sap\DM1\MDS00\config
Open MDM.ini file in notepad
Add the below 2 entries.
SAP RFC Gateways= GWHOST=XXXX.hostnamexxx.xxx GWSERV=sapgw00
Trusted SAP Systems= XXD
This will enable gateway connection between SRM and MDM and will enable trusted connection.
For trusted connections to work, we created a service user called SRM_MDM_API with SAP_ALL in SRM and also created the same user in MDM with Default role.
Error message:
Logon Connection Error
Error Details Error when opening an RFC connection
Error Details ERROR: program XXXXXXXXPRD.MDS not registered
Error Details LOCATION: SAP-Gateway on host XXXXXXXXprd.xx.xxxxxxhostname.xxx / sapgw00
Error Details DETAIL: TP XXXXXXXXPRD.MDS not registered
Error Details COMPONENT: SAP-Gateway
Error Details COUNTER: 77326
Error Details MODULE: gwr3cpic.c
Error Details LINE: 1778
Error Details RETURN CODE: 679
Error Details SUBRC: 0
Error Details RELEASE: 700
Error Details TIME:
Error Details VERSION: 2
Procedure Tried
1) This procedure is for Linux OS - Similarly we tried in Windows OS ( If any procedure is wrong also, Please correct us)
To register the program login into the OS level as sudo su u2013 <sid>adm and execute the following command.
rfcexec u2013g<program id> -a<gateway host name> -x<gateway service>
rfcexec is the server program name, the <program id> can be obtained from SM59, it is case sensitive and should match with the entry in SM59. The <gateway host name> and <gateway service> can be obtained from the transaction SMGW. When this command is executed it goes to a hanging loop.
The connection will fail once this command is terminated or the user executing this command logs off
2)
To avoid this, instead of using the above mentioned command an entry should be made in the file saprfc.ini
To do this, execute the following command
sudo su u2013 <sid>adm
rfcexec u2013D<destination name>
<destination name> is the RFC destination name in SM59
In order to do above step 2, we could not find saprfc.ini in windows 2008 server. Please let us know path where it will be usually?
3) Already checked the notes sapnote_0000684841
I know that it is generic error..This is happening to specific one of system only.
Thanks
Edited by: saptest2011 on May 20, 2011 5:36 PMHello SM,
Thanks for your quick reply.
Thanks for sharing link for document ie Configure the MDM Administration_cockpit. It is helpful. I read that document.
But still issue remain there.
The same RFC connection works between SRM sandbox to MDM sandbox.
Only issue with SRM Prod to MDM Prod (newly built system)
difference between MDM Prod and MDM sandbox.
MDM Prod runs: Windows server 2008 OS
MDM Sandbox runs: Windows server 2003 OS
Landscape: PI7.1, MDM 7.1 and SRM 5.5, SRM-MDM Catalog 3.0
Even i did os01 tcode ping test using host name (specific IP address) from SRM prod to MDM prod, it is fine.
Thanks a lot for your help.
I checked these notes also
Note 353597 - Registering a server program
Note 44844 - No connection to registered RFC program
Note: in smgw tcode in SRM system, the required program id is not showing in logged on clients
Thanks
Edited by: saptest2011 on May 23, 2011 5:00 PM
Edited by: saptest2011 on May 23, 2011 5:39 PM -
I get the following error when I test an RFC;
Logon Connection Error
Error Details Error when opening an RFC connection
Error Details ERROR: program BIS_TR9.TRFC not registered
Error Details LOCATION: SAP-Gateway on host cpsaput1 / sapgw61
Error Details DETAIL: TP BIS_TR9.TRFC not registered
Error Details COMPONENT: SAP-Gateway
Error Details COUNTER: 21389
Error Details MODULE: gwr3cpic.c
Error Details LINE: 1777
Error Details RETURN CODE: 679
Error Details SUBRC: 0
Error Details RELEASE: 700
Error Details TIME: Wed Aug 22 16:33:49 2007
Error Details VERSION: 2
The Gateway monitor connections to clients has this entry:
242 cpamhq-sbg04 BIS_TR9.TRFC Registered Server cpamhq-sbg04 10.5.1.141 Wed Aug 22 16:34:39 2007 Connection OK
This is a copy of a previous system on the same server with a different system number. It has support package stack 10 with kernel patch number 121.
Thanks,
JoeHello Joe,
From the error logs I can make out two things.
Your SAP resides on cpsaput1 while external program resides on cpamhq-sbg04 .
Now you have done a system copy on cpsaput1 from a SAP system which was connecting fine to the RFC. That connection was going through because SAP details for the old server were correctly maintained at cpamhq-sbg04 but the same has not been done for cpsaput1 . Ask the adminsitrators for cpamhq-sbg04 to make settings for cpsaput1 and then try RFC again.
Regards.
Ruchit. -
Error 'Program not registered' while testing RFC connection PI_RFC
Hi Basis Experts
I am having problems while testing an RFC connection PI_RFC in one of our PI quality system.
Here is the Error log
Logon Connection Error
Error when opening an RFC connection
ERROR: program PI_RFC not registered
LOCATION: SAP-Gateway on host bp1xeuaa202 / sapgw01
DETAIL: TP PI_RFC not registered
Details COMPONENT: SAP-Gateway
COUNTER: 15866
MODULE: gwr3cpic.c
Details RETURN CODE: 679
We tried restarting the JCO-RFC provider service in VA,also tried restarting the Gateway service, tried registering the RFC using below command
rfcexec u2013g PI_RFC -a bp1xeuaa202 -x sapgw01
rfcexec u2013D PI_RFC
the command didnt gave any output also in SMGW tcode we didnt get the entry(PI_RFC) under system type as registered server.
Also we tried changing the Gateway hostname and service name in SM59.
Still we are facing the same issue, can anyone please help us in resolving this issue.
Regards
SyedHi,
It seems to like problem with your program is not registered. As suggested by spantaleoni, you can go through.
Here Program Id must be case sensitive. Once again check with your program Id.
And, you have to register your program id in Visual Administrator.
Goto Visual Administrator:
In that Select Cluster>Server>Services-->JCo RFC Provider
Then enter the Program Id and gw host & service.
Hope this helps to you.
Regards,
P.Rajesh -
Sap to non sap connection ( program not registered/cpic-call
Hi all,
Im trying to connect sap to siebel system.IN TCP/IP connections iv selected register program id & passed the parameters ...program id,gateway host and gateway service
i followed michal krawczyk steps & also checked in smgw
transaction also but program id is not registered there
im getting error like program sapprog not registerd cpic/call
<b>Detailed error</b>
<b>Error</b> - program sapprog is not registsred
<b>location</b> - sap gateway on host saple / sapgw01
<b>detail</b> - Tp sapprog is not register
<b>component</b> - gateway
<b>counter</b> - 387
<b> module</b> -gwr3cpic
<b>line-</b> 1621
<b>return code</b> - 679
<b>subrc</b> - 0
please try to help me out in this issue. all inputs r rewarded.
Regards,
LavanyaHi
Thanks prince,iv checked entries in sm59, i checked smgw tranaction(gateway monitor) for logged on clients
its showing like this
number/luname/tpname/sys.type/hostname/hostaddres/last req
0 /sapnav/sapgw00/local_r3/sapnav.sapdomain.com/192.158.3.219
if i double click on above...
read/write socket = 4
handle = 4
time = tue jan 26 16:54:13 2006
socket = 1652
stat = ni_connected
type = stream ipv4
out = 1122 messages 64 bytes
in = 1 messages 64 bytes
local =127.0.0.1:3300
remote = 127.0.0.1:1848
options =
lu = sapnav
tp = sapgw00
lon lu = sapnav
long tp = sapgw00
ext program = 0
no conversation = 24
appc version = 6
hostaddr[0] =
hostaddr[1] = 127.0.0.1
offset in = 0
timeouts in = 0
connected = tue jan 24
last req = mon jan
request block number in= -1
connection out = -1
target out = -1
offset out = 0
restlen out = 0
timeouts out = 0
request block number out = -1
accept info = einfo
snc forced = 0
<b>just see gateway monitor 4 sapnav/parameters & attributes</b>Profile
parameter Value
gw/max_sleep 20
gw/conn_disconnect 900
gw/conn_pending 60
gw/gw_disconnect 1800
gw/req_stack_size 30
gw/max_conn 500
gw/max_wp 0
gw/max_conn_per_wp 10
gw/cpic_timeout 20
gw/deallocate_timeout 600
gw/reg_timeout 60
gw/reg_lb_level 1
gw/reg_lb_default 20
gw/side_info C:\usr\sap\D01\DVMGS00\data\sideinfo.DAT
gw/sec_info C:\usr\sap\D01\DVMGS00\data\secinfo.DAT
gw/startup C:\usr\sap\D01\DVMGS00\data\gwstartup.DAT
gw/stat 0
gw/tcp_security 1
gw/cpic_security 1
gw/max_sys 300
gw/max_shm_req 50
gw/max_shm_req_per_conn 10
gw/max_overflow_size 5000000
gw/max_overflow_usage 10
gw/keepalive 300
gw/reg_keepalive 300
gw/compatibility 0
gw/monitor 1
gw/netstat_once 1
gw/close_routes 120
gw/timeout 0
gw/internal_timeout 0
gw/nitrace 0
gw/accept_remote_trace_level 1
gw/resolve_timeout 0
rdisp/max_gateways 100
rdisp/max_comm_entries 500
rdisp/sna_gateway sapnav
rdisp/sna_gw_service sapgw00
rdisp/TRACE_LOGGING OFF
gw/rem_start REMOTE_SHELL
gw/remsh rsh
exe/gwrd C:\usr\sap\D01\SYS\exe\run\gwrd.EXE
snc/enable 0
snc/permit_insecure_start 0
Attributes
Release 640
Release no 6400
internal version 2
start time Tue Jan 24 16:53:47 2006
build time Aug 17 2004 23:33:51
build with Unicode TRUE
build with Threads TRUE
gateway hostname sapnav
gateway service sapgw00
req_sync_limit 24
appc_ca_blk_size 34396
gwreq_ln 34588
appcdata_ln 34316
overflow_size_limit 500000
overflow_use 0
trace level 1
trace level external programs 2
PID Gateway Reader 4952
internal version 2
Shared memory Sizes in bytes
CONN_TBL entry 1748
CONN_TBL total 874000
STATISTIC area 1392
iv changed some values for my safety.plz check it and let me know the error to register program id. Hope ull solve my issue this time.
Thanks in advance,
Lavanya.
Maybe you are looking for
-
Need help for QCI ASTM routines
Hello Friends, Presently I am setting up the QCI config in our test server. I have configured the necessary settings for the Conversion group and the reading group. Now when I am testing the results using the O3QCITEST transaction, I am getting an er
-
Palm desktop V4.0 for windows
Hi, Hope someone can help. I use a Palm M505. The software I have which came with the palm works with my MS windows XP operating system. Will it work to hotsync with the new computer running Windows 7 that I will be getting soon? Any info greatly app
-
Dynamic table control in adobe forms
Hi All, I am creating abobe form using web dynpro java. I have a table with one row & 5 columns. After that i have put "add" button, so that as i click on this button, a new row will be inserted in the same table with same no. of columns & data field
-
My problem with downloading ae cs5.5
every time i try to download AE cs5.5 trial the adobe download assistant says error please try again and it still doesn't work
-
Hi, we are using sap ecc 6.0 hp-ux 11.23 oracle 10g. i have many z reports.where some of the endusers running the report in back ground and even front end .even we informed to run back ground at night.still they are running.i have 6 dia and 6 bg.whic