BT Infinity should I change the cables?

I see BT gives you Ethernet 5E and standard ADSL cable should I upgrade the Ethernet cable to a 6E and get a better ADSL cable would I see a little difference!

If you are using the gigabit ports then Cat 6 would be needed to carry the speed but if not cat5e is good enough. The ADSL cable will be good enough.
See this guide re the Ethernet Ports
http://bt.custhelp.com/app/answers/detail/a_id/8163/~/how-do-i-connect-my-pc-using-ethernet-for-bt-h...

Similar Messages

  • My cable charger is somehow twisted right next to the USB plug. Is this dangerous? Should I immediately change the cable?

    My cable charger is somehow twisted right next to the USB plug. Is this dangerous? Should I immediately change the cable?

    Hey Absal,
    Apple usually manfucture this very safely, in the ast years i have used 15+ and it is safe to say that i never had any incidents. There are a lot layers to it and it is very safe but if the plastic bit is somehow damaged i suggest you change it. Why not risk anything for a simple plug that is not even very expensive.
    I really hope this helps you. If not feel free to give me a shout.
    Best of luck!
    <Edited By Host>

  • Should I change the pricing procedure in SD ?

    Hhello
    we are running sales orders with a certain pricing procedure now for a long time. There are a lot of change requests for this pricing procedure, including structural changes like new sums and changes of positioning of a conditon type within the procedure. Should I change the existing pricing procedure to meet the new requirements or should I create a new procedure with a complete new structure, sums etc ?
    Please advice. What are possible problems, which can occure in one or the other method.
    Best regards and thanks for your help
    Rauno

    Hi Rauno,
    You should definitly copy the current pricing procedure and make your changes to the copy.
    The only disadvantage is that you can't mix old and new flows into e.g. the same billing document ( = pricing procedure is split criterium ).
    But the BIG advantage is that all your old flows will not get inconsistent 100% guaranteed ( when you 'look' at them, or do e.g. VA02 on an old flow etc..)
    rgds
    Dirk

  • Where should I change the adapter? It doesn't work from the start.

    where should I change the adapter? It doesn't work from the start. But there is no apple store in our city.

    The phone does not charge when linking with adaptor. But it is OK when linking PC using USB instead. I do not know why, but I am just sure there is something wrong with the adaptor.

  • I dropped my iphone 3G last day and soon after the display became very dim and it still remanins the same..Could anyone pls help with a solution? Should I change the display or is it a minor damage?

    I dropped my iPhone 3G last day and soon after that the display turned too dim and it still remains the same.
    Could anyone help me with a solution?
    Should I change the display or is it a minor damage??
    Thanks for your support

    sounds like you broke the display when you dropped it.  There's nothing we users here can do for you.
    Since the iPhone warranty does not cover accidental damage, you will have to pay to have your phone repaired or replaced.  You can bring it into Apple for an out of warranty exchange in the country of purchase, or you can find a 3rd party iPhone repair store in your area.

  • My ipod 1st gen battery went totally dead because the usb cable was defective. I've changed the cable.  now when i connect my ipod to the netbook, itune is not launching automatically and windows does not recognize it......how can these issues be resolved

    My ipod 32gb 1st generation battery went totally dead because the usb cable was defective.  I have since replaced the cable but now itune will not launch automatically as it did before and windows xp does not recognize it.  Nonetheless it is charging.  However can i resolve these issues bearing in mind that i am not tech savvy?

    have since replaced the cable but now itune will not launch automatically as it did before and windows xp does not recognize it. 
    Try disabling a/v software and turn off the Firewall on your PC.
    Disable antivirus software
    Turn-Windows-Firewall-on-or-off
    Then connect the iPod to your computer. Launch iTunes. If your computer still won't recognize the iPod check out this article.
    http://support.apple.com/kb/TS1538
    Once your iPod is functioning again, with it connected to your computer, launch iTunes. Select the iPod under Devices in the source list on the left.
    Select the box next to:   Open iTunes when this iPhone is connected
    That way iTunes should open automatically when you connect your iPod to your computer.
    And iTunes / Preferences - Devices. You can have your iPod sync automatically whenever it's connected from the Devices pane.

  • Should I change the Desktop Wallpaper to avoid pixel burning?

    Hi there.
    I noticed that my old 30-inch Cinema Display had pixel burning becasue I had the same Desktop Wallpaper all the time, now I have a Thunderbolt Display and I want to avoid this to happen.
    Should I setup the desktop wallpaper to change every x amount of time? or is it just my imagination and anyway the pixels just dim and burn with the years?
    Thanks!

    I don't know what Apple says but I say YES.
    I change my desktop wallpaper every few days because of this.
    I never expierenced pixel burning btw but it's better to be safe then sorry right?

  • Should I change the DOCTYPE in the Page Editor Options?

    The Document Type Declaration I now have for my two sites is XHTML 1.0 Transitional. On the Authoring tab should I change this to HTML 5? Can this affect the pages I created several years ago with EW?
    Also on the Defaults Fonts tab I see I have US/Western European (ISO). Should I change this to (UTF-8)? If I do that, should I also change to UTF-8 in the Site Settings?
    I ask these questions because I see these settings in a new book I'm reading about Responsive Web Design. I haven't changed my sites for years and am way behind in my knowledge about how to do it.
    One more question - I just read in a book published in 2007 that if I use the default UTF-8 bad things may happen. The author said that EW adds Byte Order Marks to the top of each page. She said that this may cause problems with some web servers and all
    PHP pages.

    The doctype setting affects new pages created; it does not change old pages. There is no need for you to change your old pages unless you want to / have a reason to.
    The language character set under Default Fonts tells you which character set you are setting the Default fonts for, which determines what fonts EW uses in Code View, and in Design View if you haven't specified a font.  [This doesn't tell you
    what fonts a user will see on your site if you don't specify fonts.]  This setting does not determine which character set your pages are actually using.  (If you look at UTF-8, you'll see it also has default fonts.)
    Site Settings is where you would change the charset if UTF-8 is not what it is currently is set to.  (You'll see the encoding in the "Content-Type" meta tag in the page.)  This affects new pages you create, not existing
    pages.
    A book from 2007 does not relate to the current EW4.  Using byte order marks on normal pages isn't an issue.  Make sure you have php pages unchecked for byte order marks in Page Editor Options.  That should be the default setting for EW4.

  • Should you change the replication partners

    We have been adding new 2012 R2 domain controllers. As we add them the have the automatically generated server. I am not sure this is a preferred server as it is a remote site server. Why does it not use our main site primary domain controller
    Should I change it or add the primary server?
    We have many remote site that have a DC that is also a file and print. Our main site has two DC and all our site servers are set to use the main DC as the secondary DNS

    Doing that manually is not recommended.
    Pls have a look - You Are Not Smarter Than The KCC
    http://blogs.technet.com/b/markmoro/archive/2011/08/05/you-are-not-smarter-than-the-kcc.aspx
    Regards,
    Biswajit
    MCTS, MCP 2003,MCSA 2003, MCSA:M 2003, CCNA, Enterprise Admin, ITIL F 2011
    Blog:
      Script Gallary:
      LinkedIn:
    Note: Disclaimer: This posting is provided & with no warranties or guarantees and confers no rights..

  • I have found image retention.should i change the screen?

    macbook pro with retina.....when i set my screen saver to grey color and open the safari,and hold for 2 or 3 mins.i will got image retention.i should request to change the screen or the mac.

    take it right away and be careful they might say it's "according to the specification" yes!! it happened to me: https://discussions.apple.com/thread/4522765

  • Should I change the action profile?

    Hi Experts!
    The message type slf1 has the action profile:
    SMSD_ABA_MLDG_SERVICEVORGANG
    Our Support Desk has some bugs, but it works.
    My question is: May I change the action profile to:
    SLFN0001_STANDARD_DNO?????
    What consequences might occur?
    Thanks for reply!

    Hi Rauno,
    You should definitly copy the current pricing procedure and make your changes to the copy.
    The only disadvantage is that you can't mix old and new flows into e.g. the same billing document ( = pricing procedure is split criterium ).
    But the BIG advantage is that all your old flows will not get inconsistent 100% guaranteed ( when you 'look' at them, or do e.g. VA02 on an old flow etc..)
    rgds
    Dirk

  • HT1349 HEELO! I CANNOT HEAR MY MUSIC AT ALL ON MY DESKTOP PC. I WAS ABLE TO LISTEN IN THE PAST. ABOUT A WEEK AGO. SHOULD I CHANGE THE WINDOWS SYSTEM AUDIO SETTINGS?

    I HAVE BEEN LISTENING TO ALL MY ALBUMS, CD,S ETC  ON MY DESKTOP, MY LAPTOP, AND MY IPOD TOUCH. NOW I CANNOT LISTEN ON MY DESKTOP. WHERE IT ALL BEGAN. I HAVE CHANGES THE PLAY NOW WINDOWS OR MICROSOFT SETTINGS. SHOULD I PUT THEM BACK? TO POSSIBLY DEFAULT SETTINGS. I THOUGHT I SHOULD USE THE ITUNES SETTINGS AND I CHANGED TO THEM. I BELIEVE I WAS WRONG. THANK YOU FOR ANY HELP YOU MAY GIVE. IT WILL BE GREATLY APPRECIATED. AGAIN, THANK YOU 5 12 2012

    Read these info:
    Batteries
    iPhone

  • How should I change the following SELECT QUERY?

    Requirement:
    There are checks in the program for material group 2, z93 AND z94 which should be skipped if the sales org = 'JP40'.
    sales organisation is taken from the layout(SE51) dictionary fields (MODULE POOL PROGRAM)
    The select query is:
    select single matnr
                      into t_mvke-matnr  "dummy
                      from mvke
                      where matnr = t_9000-matnr
                        and vkorg = vbak-vkorg
                        and vtweg = vbak-vtweg
                        and mvgr2 in (c_z93,c_z94).
    How should I skip the material group c_z93, c_z94 only for JP40(vbak-vkorg) sales organisation, except JP40 material group should be there for other sales org. but for JP40 material group should be skipped.
    What would be the select query or should I give any kind of IF conditions before select query.
    Please help me out.

    Hi Rani K
    You can try like
    IF VBAK-VKORG = 'JP40'.
    select single matnr
    into t_mvke-matnr "dummy
    from mvke
    where matnr = t_9000-matnr
    and vkorg = vbak-vkorg
    and vtweg = vbak-vtweg.
    ELSE.
    select single matnr
    into t_mvke-matnr "dummy
    from mvke
    where matnr = t_9000-matnr
    and vkorg = vbak-vkorg
    and vtweg = vbak-vtweg
    and mvgr2 in (c_z93,c_z94).
    ENDIF.
    Thanks
    Gaurav

  • Firefighter Configuration - FF Owner should not change the configuration

    Hello Experts,
    We have requirement to restrict Firefighter configuration changes only to Firefighter Administrators.
    1. Restricting Firefighters to make any changes in Firefighter Configuration -- SAP Note 1101665 Superuser Security Role Modifies Tables - Successfully Achieved.
    2. Restricting Firefighter ID Owners (having /VIRSA/Z_VFAT_ID_OWNER) to make any changes in Firefighter Configuration --> Need your inputs on how to achieve this.
    We want that Firefighter ID Owners can only assign the FFID to Firefighters and assign a new controller only, but no following should be allowed to Firefighter Owners -->
    a. Creating a new owner for a FFID.
    b. Changing Firefighter configuration.
    c. Creating or changing Reason Codes.
    And which role should be assigned to Firefighter ID Controller?
    Looking forward to hear from your experiences.
    Thanks & Regards
    Davinderpal Singh

    Thanks Alpesh and Simon for your valuable inputs.
    My observations are, if you assign Firefighter Owner and Controller role only, then user is not able to make any configuration change, Reason Code change, etc, etc - behaviour is as expected.
    And in our case, this problem is coming as FF owners/controllers have been assignbed few other roles/profiles which seems to override the authorisations of FF owner role and allow changes in FF configuration.
    Now searching through each of these roles/profiles for extra set of authorisation objects is a huge security job.
    And we don't have much experience in Security - so as per your experiences what should be the best way to restrict FF owners to not make any change in FF configurations, without removing existing roles/profiles ( as we don't know what all would be removed if we remove all of these roles).
    Is it possible to specify a condition/check so that if a user has been assigned FF owner role, inspite of whatever extra permission he has - he should not be able to make configuration changes - please bear with me if i am expecting too much over here.
    Which authorisation objects controls FF configurations changes?
    Best Regards
    Davinderpal Singh

  • Giving computer to new user- how should I change the email settings?

    I bought a new MacBook Pro and want to give my husband my old one. How do I reset Mail so that it defaults to my husband's account, which is a .mac family member account attached to mine; the primary .mac account? We're also giving his MacBook to a co-worker and want to ensure that ALL personal information (banking, credit cards, emails, etc.) is erased permanently without erasing the applications.

    If you want to remove your email accounts from the Mail.app on this Mac, you can delete your accounts from within Mail, which will erase all account mailboxes and messages for your account or accounts. Then create your husband's email account.
    We're also giving his MacBook to a co-worker and want to ensure that ALL personal information (banking, credit cards, emails, etc.) is erased permanently without erasing the applications.
    The only way to ensure all data is completely erased and not recoverable by any means (simply deleting data from the hard drive does not prevent the deleted data from being recovered from the hard drive with a data recovery utility), is by reformatting the hard drive, and then re-install the OS and all included applications included with the install package that shipped with this Mac.
    Disk Utility provides several options for a secure erase of all data on the hard drive.

Maybe you are looking for