BT Infinity Username and password

I have read that a username and a password will be sent to me before the arrival of the engineer. The engineer is arriving tomorrow, but i was not yet sent a username and password, whome should i contact to get it...
Solved!
Go to Solution.

Just went to the following forum which explains it all...
http://community.bt.com/t5/BT-Infinity/BT-Infinity-Username-and-Password/m-p/137469/highlight/true#M...

Similar Messages

Outlook/Thunderbird - username and password are re...

When I start Outlook or Thunderbird to access my email's, my username and password are rejected by the server even though they are entered correctly. (A pop up window appears asking me to enter my password). The only way to gain access to my email's through Outlook or Thunderbird is to log on to the BT Yahoo webmail page and log out of my BT Yahoo email account on this page and log back in again. Once I do this then Outlook or Thunderbird can now access my emails. This lasts for about an hour or so before the error message pops up again.
I have set up Outlook on several PC'/Laptops in my home and they all show this error, either at Outlook start up or after a period of time.
I have already reported this problem this week and had a BT Tech take over my laptop to try and solve the problem but to no avail. I tried to explain the scenario above to her but she did not accept that the problem could be at the BT server end. Something at your server end is periodically rejecting my login credentials for whatever reason and the only “fix” is as described above (the logout of webmail and login back in fix).
It may only be coincidence but this problem seems to have occurred since I had BT Infinity installed a couple of weeks ago.
I have set my email on my laptop to be both POP3 and IMAP and the error occurs using both setups.

There's a shedload on this if you search the forums. It's a Yahoo! server problem which BT can't/won't get them to fix. I believe it doesn't usually affect IMAP though.
You can click the white star next to this message if you think it was helpful.

Reporting Services username and password prompting

We have several branch office locations and one reporting services server. All of the branch office locations can access the reporting services server, but we have one location for the passed week, each time they make a connection to this server, it prompts
them for a username and password and will not allow them to connect even if the correct username and password is correct.
I have tried adding the server to the IE intranet/trusted site list. Set IE security on all zones to automatically logon with current username and password.
What is strange is that this is the only branch office site that is having this issue. It is almost like kerberos is broken for this site location only.
DOes anyone has any suggestions what could be causing this problem for all computers in this one location. Nothing has changed on their local servers nor have we pushed any updates to the machines.

Hi bubba1984,
As per my understanding, I think this issue is caused by Kerberos authentication. Kerberos is an authentication protocol that allows clients that create authentication tokens to associate a specific destination to that token. In the failure case, there is
a mismatch between the destination specified in the token and the report server process configuration. Due to this mismatch, the underlying Kerberos authentication scheme supported by Windows prevents report server from authenticating the user.
To fix this issue, please try to remove RSWindowsNegotiate and ensure RSWindowsNTLM is specified in the rsreportserver.config file. For more details, please take the following article as reference:
http://blogs.msdn.com/b/lukaszp/archive/2008/03/26/solving-the-reporting-services-login-issue-in-the-february-ctp-of-sql-server-2008.aspx
Hope this helps.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Single sign-on and different usernames and passwords

Hello,
I am building a Portal with WLPS 3.5 and WLS 6.0. I tried to get
information about the background of single sign-on.
I understand, that I need a Realm (i.e. LDAP Realm) to authenticate the
user for the first login to the portal (with username and password).
Now I would like to integrate my webmail-programm (to get emails from
Lotus Notes via Internet) as a portlet.
For my understanding the user has to authorizate to get access to webmail.
Therefore I create a ACL for webmail and this ACL is assigned to my
security Realm.
I would like the portlet to show after login the number of mails for the
specific user. But where are the username and password for webmail stored
and how are they received and forwarded?
I understand that my ACL included all users that have access to webmail
(i.e. all users). But I only want emails for the specific user.
Does WLS get all usernames and passwords while the first login? Do I have to
implement a algorithmen to get the specific username and password for the
requested resource in my portlet?
Has anyone solved a similar problem or can tell me where I can get more
information. I read the WebLogic Security document but I cant find a
answer to my questions.
Thanks
Lydia

Lydia,
I'm not an expert in this area, but I can give you a start.
As for single sign-on, there are different levels. For single sign-on across web-apps,
the servlet spec requires this (section 12.6 of th 2.3 spec) and therefore Weblogic
does this.
What you are talking about is single sign-on across back-end applications through
a web-app. BEA has partnered with Securant (just acquired by RSA) to provide this
kind of functionality. Browse to http://www.rsasecurity.com/products/ and look
at the ClearTrust product. BEA has also partnered with Netegrity (www.netegrity.com)
with their SiteMinder product. Neither is included in the Weblogic license. I'm
sure either vendor would be excited to explain how their product will solve your
problem if you give them a call.
As for where the username and passwords are stored, that is up to the realm. If
you are using the default WLPS RDBMSRealm, the username and encrypted password
are stored in the WLCS_USER table. If you are using LDAPRealm, they are stored
in your LDAP server.
Hope this was useful!
PJL
[email protected] wrote:
Hello,
I am using PersonalizationServer 3.5 and WLS 6.0 SP 2.
Now I try to unterstand the functionality of Single sign-on when a user
has different usernames and passwords for different applications.
Can someone explain where the usernames and passwords for a user are
stored (all in the LDAP-realm or a RDBMS-realm?) When a user access the
application how username and passwords are mapped? Or usernames and
passwords for all applications are the same and will be equalized?
Precisely I would like to get access to a mail-account for a specific
user
(webmail from Lotus Notes).
Thanks for any help
Lydia

How do i send the username and password to yahoo web page through url

how do i send the username and password to yahoo web page through url i.e as Query string so that my account in yahoo will open...

If you don't mind using a library, then download and use the Apache HttpClient library. It takes care of all these details for you.

Claims Based Authentication SPSecurityTokenService.Issue() failed: The security token username and password could not be validated.

Please excuse the lousy table...Its late :-)
I have a multi-server SP2010 farm. Patched up to
Configuration database version: 14.0.6106.5002
My goal is to have a claims based web application that authenticated to ADAM for Extranet. I have configured the servers exactly to MSDN and technet specs (following this spec to the
letter (
http://technet.microsoft.com/en-us/library/ee806882.aspx) to allow the forms side of the web app to authenticate to ADAM.
IT WORKS IN DEV!!! , which is a single server farm. However, it does not work in production. I get the following:
Claims Auth log entries:
1:06:25 AM
w3wp.exe (0x0EDC)
0x1790
SharePoint Foundation
Claims Authentication
f2ut
Verbose
Authenticated with login provider. Validating request security token.
1:06:25 AM
w3wp.exe (0x0EDC)
0x1790
SharePoint Foundation
Claims Authentication
0
Verbose
Using membership provider 'ADAMProvider'.
1:06:25 AM
w3wp.exe (0x0EDC)
0x1790
SharePoint Foundation
Claims Authentication
0
Verbose
Doing password check on '[email protected]'.
1:06:46 AM
w3wp.exe (0x0EDC)
0x1790
SharePoint Foundation
Claims Authentication
0
Verbose
Failed password check on '[email protected]'.
1:06:46 AM
w3wp.exe (0x0EDC)
0x1790
SharePoint Foundation
Claims Authentication
0
Unexpected
Password check on '[email protected]' generated exception: 'System.ServiceModel.FaultException`1[Microsoft.IdentityModel.Tokens.FailedAuthenticationException]: The security
token username and password could not be validated. (Fault Detail is equal to Microsoft.IdentityModel.Tokens.FailedAuthenticationException: The security token username and password could not be validated.).'.
1:06:46 AM
w3wp.exe (0x0EDC)
0x1790
SharePoint Foundation
Claims Authentication
fo1t
Monitorable
SPSecurityTokenService.Issue() failed: System.ServiceModel.FaultException`1[Microsoft.IdentityModel.Tokens.FailedAuthenticationException]: The security token username and password
could not be validated. (Fault Detail is equal to Microsoft.IdentityModel.Tokens.FailedAuthenticationException: The security token username and password could not be validated.).
1:06:46 AM
w3wp.exe (0x1B34)
0x08A0
SharePoint Foundation
Claims Authentication
fsq7
High
Request for security token failed with exception: System.ServiceModel.FaultException: The security token username and password could not be validated.
at Microsoft.IdentityModel.Protocols.WSTrust.WSTrustChannel.ReadResponse(Message response)
at Microsoft.IdentityModel.Protocols.WSTrust.WSTrustChannel.Issue(RequestSecurityToken rst, RequestSecurityTokenResponse& rstr)
  at Microsoft.IdentityModel.Protocols.WSTrust.WSTrustChannel.Issue(RequestSecurityToken rst)
at Microsoft.SharePoint.SPSecurityContext.SecurityTokenForContext(Uri context, Boolean bearerToken, SecurityToken onBehalfOf, SecurityToken actAs, SecurityToken delegateTo)
1:06:46 AM
w3wp.exe (0x1B34)
0x08A0
SharePoint Foundation
Claims Authentication
8306
Critical
An exception occurred when trying to issue security token: The security token username and password could not be validated..
1:06:46 AM
w3wp.exe (0x1B34)
0x08A0
SharePoint Foundation
Claims Authentication
f2un
Verbose
Form authentication failed.
I have tried EVERYTHING (well, nt everything, I don’t have the fix I suppose).
I found plenty out there and nothing directly correlates with this issue.
I searched on all parts of the errors I got.
This contains an interesting blurb about setting up access for the apppool id correctly.
That’s not the case for me. It works in dev and the same id are used there.
http://sharepoint-2010-world.blogspot.com/2011/03/adam-forms-based-authentication-in.html
This was good but it doesn’t give specs on what the environment looks like:
http://social.msdn.microsoft.com/Forums/en/sharepoint2010general/thread/557143a6-4b36-4939-bb7f-d62a9335fd18
The was interesting…but I am patched up beyond the June 2011 CU so it’s a moot point:
http://social.technet.microsoft.com/Forums/en-US/sharepoint2010setup/thread/9b8368ef-c5e5-4ead-b348-7b2b5587cfc8
Any and all help would be greatly appreciated!

Hi.
You say its a multiserver farm, do you have more than one web server then?
If thats the case, have you tried accessing the site on each server directly?
Found this for you, maybe that can help?
Troubleshooting Exceptions: System.ServiceModel.FaultException`1
http://msdn.microsoft.com/en-us/library/bb907220.aspx
and this:
SharePoint 2010 Claims Authentication - The security token username and password could not be validated reoccurring every morning
http://social.technet.microsoft.com/Forums/pl-PL/sharepoint2010setup/thread/383f1f9b-5c4a-4e19-b770-2a54b7ab1ca1
and
This seems to be a good guide:
http://donalconlon.wordpress.com/2010/02/23/configuring-forms-base-authentication-for-sharepoint-2010-using-iis7/
Good luck
Thomas Balkeståhl - Technical Specialist - SharePoint - http://blksthl.wordpress.com

I do not know my apple administrator username and password? How do I find out what it is? I am trying to download IBM Notes and Domino onto my MacBook Pro and I cannot download the software without verifying my apple administrator username/password

I do not know my apple administrator username and password. How do I find out what it is? I am trying to download IBM Notes and Domino onto my MacBook Pro and I cannot download the software without verifying my apple administrator username and password.

iOS is only for mobile devices, so:
Resetting or changing a password:
For Snow Leopard or earlier: http://support.apple.com/kb/HT1274
For Lion or later: http://support.apple.com/kb/HT6022
For Mavericks users:
http://www.macworld.co.uk/how-to/mac-software/how-change-admin-password-mac-3535 328/
This is also useful:
http://www.macworld.co.uk/ipad-iphone/news/?newsid=3463233&olo=email
If it's running Mac OS X 10.6.8 or earlier, insert a Mac OS X install DVD, restart with the Option key held down, click on it, and use the Reset Password utility.
If it's running Mac OS X 10.7 or newer, restart with the Command and R keys held down, open the Terminal, and use the resetpassword command:
https://discussions.apple.com/docs/DOC-4101

I have a iphone 5 and I can login with my apple id to purchase music. However, when I try to login into icloud using the very same username and password that I use in the apple store it does not work to enter icloud, so what what gives???

I have a iphone 5 and I can login with my apple id to purchase music. However, when I try to login into icloud using the very same username and password that I use in the apple store it does not work to enter icloud, so what what gives???

I could do that, however when I select the icloud button (or whatever the heck it is) I am asked to enter the apple id and password. So if you are suppose to create another one for icloud you'd think it would give you the option at this point which would be logical.

I cant get my iphone 4 tolog in to my company wifi. i updated to ios 6 and now it just goes to my companies login screen. i enter my username and password and it just sticks. however it will logon to wifi without a requirement for a user name and password

I have to log onto my companies wifi by first going thru a log on page that equires a username and password. before i updated to ios 6. it worked fine now it just goes to the login page and when i hit enter it doesnt do anything just stays stuck on that page. however the phone will log onto a regular wifi router that doesnt require any kind of username or password. any ideas on how to fix it. i have tried everything including reseting all network settings.

1. Settings>General>Reset>Reset Network Settings
or
2. Use "Forget This Network"

Why do my firewalls only use the domain username and password for login and enable passwords, not a different enable password like my switches do? The RADIUS config looks the same...

/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Table Normal";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-priority:99;
mso-style-parent:"";
mso-padding-alt:0in 5.4pt 0in 5.4pt;
mso-para-margin:0in;
mso-para-margin-bottom:.0001pt;
mso-pagination:widow-orphan;
font-size:10.0pt;
font-family:"Times New Roman","serif";}
Issue:
Cisco firewalls require only one level of password i.e. the domain username and password are used for both logging in as well as reaching global configuration mode.
Background:
We have multiple Cisco network devices set up which authenticate to our Windows domain controller using NPS (Windows 2008 R2). The switches we have set up all function exactly as we would hope as they require your domain username and password to login to the device. They then require a separate password when you use the enable command, this is stored in Active Directory:
Switches:
Username:domain-username
Password:domain-password
SWITCH>enable
Password:enable-password-in-Active-Directory
SWITCH#
Firewalls (as they currently are):
Username:domain-username
Password:domain-password
FIREWALL>enable
Password:domain-password
FIREWALL #
With the firewalls however, they require your domain username and password first, and then your domain password again when using the enable command. I want the firewalls to use the enable level password that the switches currently use instead of the domain password again. The current configuration look like the following:
Current switch configuration:
aaa new-model
aaa authentication login default group radius local
aaa authentication enable default group radius enable
aaa authorization exec default group radius local
aaa session-id common
radius-server host 192.168.0.1 auth-port 1645 acct-port 1646
radius-server source-ports 1645-1646
radius-server key 7 1234abcd
Current firewall configuration:
aaa-server DC01 protocol radius
aaa-server DC01 (outside) host 192.168.0.1
aaa authentication ssh console DC01 LOCAL
aaa authentication enable console DC01 LOCAL
key 1234abcd
Any help would be great, thanks!

Cisco ASA works that way by design. You could remove "aaa authentication enable" and then you could use the "enable password" command to set your enable password.
But if you do that, then ASA would change your username to "enable_15". That would break Authorization and Accounting if you're using them. Let me clarify with an example
Firewalls :
Username:domain-username
Password:domain-password
FIREWALL>show curpriv
Username : domain-username
Current privilege level : 1
Current Mode/s : P_UNPR
FIREWALL>enable
Password:enable-password-from-running-config
FIREWALL #show curpriv
Username : enable_15
Current privilege level : 15
Current Mode/s : P_PRIV
If you're using Authorization and Accounting it's recommended to stick with your current behavior.

Server 2003 VPN clients can't verify username and password

Hi,
Hoping someone can help or point me in the right direction. I have a Windows Server 2003 R2 standard SP2 running RRAS. It has Dual NIC's and is configured for PPTP VPN. I am using a BT Business Hub 5 for internet access and using the BT Static IP service.
The BT Hub assigns the static IP address chosen to the Server using DHCP. The firewall is configured to port forward PPTP traffic to the 2003 server. This all works correctly.
The 2003 server is on a domain where the DC is a 2008 R2 server. The DC also acts as the DNS and DHCP for the network.
The default gateway for the domain is pointed towards our WinGate proxy server which also acts as a DNS server.
The 2003 server LAN NIC is configured manually, usually I would not configure a deafult gateway on the LAN NIC as the WAN NIC needs the default gateway for the BT Hub.
The problem I am having is if a default gateway is configured on the LAN NIC, I can connect to the VPN and it will logon to the network. Once connected everything works ok. If the connection drops, when trying to reconnect the client can no longer verify
the user name and password against the domain and the connection is refused.
If I do not have a default gateway configured in the LAN NIC the VPN clients can not verify the username and password for the domain at all and I get RPC failure errors in the event viewer with the source dnsapi.
Once this error occurs the only way I can get the clients to reconnect is to disable the WAN NIC, restart the RRAS service and enable the WAN NIC again.
Any insight will be much appreciated.

Hello,
for Networking configuration questions better ask in
http://social.technet.microsoft.com/Forums/windowsserver/en-US/home#forum=winserverNIS&filter=alltypes&sort=lastpostdesc&content=Search
Best regards
Meinolf Weber
MVP, MCP, MCTS
Microsoft MVP - Directory Services
My Blog: http://blogs.msmvps.com/MWeber
Disclaimer: This posting is provided AS IS with no warranties or guarantees and confers no rights.
Twitter:

How to connect an apple tv to an enterprise network with a username and a password? I need to use it over my university's wifi. theres no option to enter username and password. how to connect the apple tv to such enterprise network?

How to connect an apple tv to an enterprise network with a username and a password?
I need to use it over my university's wifi. theres no option to enter username and password. how to connect the apple tv to such enterprise network?

Contact the University's IT dept, they may be able to set something up on the network to allow the ATV to connect without the need for a user name/password.

Upon opening MFF 3.6.3 I am asked to authenicate a username and password to get on to "fasTun". I believe this is a virus, which I am unable to find, or eradicate. This co-incided with my computer located in Canberra, Australia, thinking my ISP is in Fran

See detail in original question. Here is the text from the dialog box which comes up, with fields for Username and Password: "The proxy fastun.com:7000 is requesting a user name and password. The site says: "fasTun"." This means I'm unable to use MFF. I've uninstalled MFF and re-installed MFF and the same occurs. The problem arose after I'd been surfing the Net and got to a German site. From that point onwards my internet became very slow. When I ran "speedtest.net" my computer was going thruugh Frankfurt, Germany, instead of Canberra, Australia! Can you please help?
== This happened ==
Every time Firefox opened
== Following my doing a System Restore to a point prior to the computer slowing down. From that point on I've been unable to use MFF to connect to any websites. The problem does not appear using Windows Internet Explorer 8, nor is there an issue with speed of downloads. ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; GTB6; .NET CLR 1.0.3705; .NET CLR 1.1.4322; Media Center PC 4.0; .NET CLR 2.0.50727; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729)

Check the proxy settings under Tools -> Options -> Advanced - Network tab, Settings button.
You probably want No Proxy, if it is set to anything else.
See https://support.mozilla.com/en-US/kb/Options+window+-+Advanced+panel#Connection_Settings_Dialog
http://fastun.com (a registration required web accelerator / anonymizer) indicates it has some sort of Firefox add-on. Do you see a relevant one in Tools -> Add-ons -> Extensions? Try disabling it.
If you are not sure which one it is, try [[Safe Mode]] to disable all of them.

Why firefox wont ask me to enter my mail "Account details (UserName and Password)" for 2nd time, if i open same "mail account" using another session (1st session still "login")

I opened "yahoomail" in one new tab,mail page asks me to enter "UserName and Password" once typed my details, it allows me to see my mails.Again I opened "yahoomail" in new tab (Still my 1st yahoo mail account in "login" state) to check my other account,this time it automatically allows me to see the previously opened account without asking me to enetr "Account Details"

All Firefox windows and tabs run in the same "session". You can't open a 2nd account on the same server as the first account without being able to handle "session cookies" for each account.
Take a look at these three extensions which can handle multiple "cookie sessions", and pick one. 
Multifox: 
http://br.mozdev.org/multifox/ 
Cookie Swap extension: 
https://addons.mozilla.org/firefox/3255/ 
Cookie Pie extension: 
http://www.nektra.com/oss/firefox/extensions/cookiepie/

Firefox 7.0.1 does not remember/fill in username and password in Mac version although on Windows it works, so it's not the website preventing password being saved. what is up and how can this be fixed ?

There are several sites where I now have to type in my username and password each time I return, such as turnitin.com. (I'm a teacher and use this for grading). Friefox used to be able to remember this for that site and it still works at my office where I have a windows machine. Not working on my Mac OS 10.6.8 and it is really annoying to have to retype every single time; it's not a financial site or anything so why can't the Firefox browser remember and re enter my info?
And no, turnitin does not currently support Firefox 7 but it is only up to firefox 4 and up until now firefox at least worked to remember passwords.
I looked at http://support.mozilla.com/en-US/kb/Username%20and%20password%20not%20remembered and I have checked all the recommended browser settings and am not set to private browsing; the sites where this happens are not set in exceptions to remembering, and they are not set to be cleared automatically
So, what's up and why doesn't Firefox remember passwords and usernames any longer?

Now up to Firefox 8 and the problem persists. Cannot go to the www.turnitin.com page and login as I used to do -- Firefox does not remember my username or password.
Still works on Windows, and with other browsers... It would be great if a fix is available.

BT Infinity Username and password

Similar Messages

Maybe you are looking for