Bt infinty is in my area and accepting orders for ...

Hello fourms, Just to let you know this is my first post...
So about a month back on the open reach website they said that infinty is in our area, which is New Milton.
So far the only place I know that can get it is at Ballard school if you want their number its 01425 ******.
I have rung up bt twice now and they say that there is no sign of infinty on their end in my area.
also if you would like my post code it BH25 5EX. I have checked out my dads office which is in New Milton and the exchange is so close to his building that he could spit on it.. He keeps joking about it would be quicker just to run a cable him self! If you could get me any news on why infinty is not avalible on my street let alone most of New Milton, I would be very greatful. Also at home i am on cabnit 34 and at my dads office he is on cabnit 4.
Kind regards
Niall 
Solved!
Go to Solution.

Hi NiallW ,
As ryant704 has said you can check if WBC FTTC fibre broadband such as BT Infinity is available to your landline number/address by going to the BT Wholesale Database. If it gives a estimated date for WBC FTTC then your cabinet is in the rollout plan. 
If you do not have a BT recognisable number then you can check using your address by going to BT Wholesale Database http://dslchecker.bt.com/adsl/ADSLChecker.AddressO​utput .
Click here to see an example of what your looking for in the BT Wholesale Database.
If there is no mention of WBC FTTC when checking the BT Wholesale Database then unfortunately it looks like your cabinet isn't currently in Openreach's fibre broadband rollout plan. 
I have also checked the address at BH25 5EX and it looks like your cabinet (pcp 34) isn't currently in Openreach's fibre broadband rollout plan as it doesn't mention WBC FTTC for any addresses at BH25 5EX
The Openreach Superfast Fibre Broadband rollout is still in it's early stages and the plans are always being added too. 
So your cabinet may be upgraded in the future, though there is no public time scale on when that will be.
Please bear in mind that in some cases it may not be possible to provide FTTC broadband in areas due to:   
• Your line may be too far from the local street cabinet to have a stable FTTC broadband service such as BT Infinity service. • Your local street cabinet may not be suitable for fibre optic cables.
• We haven't yet got the council's planning permission to do the necessary work at your local street cabinet.
• Your home may not be suitable for fibre optic cables.
• Your landlord may not have agreed to the fibre infrastructure being provided in your building (for example if you live in a flat).
• There isn't a adequate power supply
• Health and safety issues
• No ducting or inadequate ducting
plus lots more.
The build of the fibre broadband infrastructure in the area isn't always easy and can be very complex.
Unfortunately BT Retail (a communication provider/ISP who operates this forum) does not have much say as to when and if you will be able to get FTTC or FTTP/H based broadband such as BT Infinity.
You can register your interest for Fibre Broadband such as BT Infinity by going to http://www.superfast-openreach.co.uk/expression-ge​n.aspx
You can keep checking the BT Wholesale Database and BT Infinity website for the most upto date information as these are updated regularly.
The openreach When and Where website is: http://www.superfast-openreach.co.uk/where-and-whe​n/
Also look out for these FTTC Cabinets on/near your street/area. If you see one near your old cabinet (pcp34) then you maybe in luck for Fibre broadband.
Hope that helps,
Cheers
**The Fibre-Optic Broadband Rollout is being managed and done by Openreach for all communication providers/ISPs. BT Retail (a communication provider/ISP) has nothing to do with the rollout of fibre broadband.**
jac_95 | BT.com Help Site | BT Service Status
Someone Solved Your Question?
Please let other members know by clicking on ’Mark as Accepted Solution’
Try a Search
See if someone in the community had the same problem and how they got it resolved.

Similar Messages

  • How to install the EUL5 Business Area and seeded reports for Ora Apps 11i

    Hi All,
    We have to install the EUL5 Business Area and seeded reports for Ora Apps 11i.
    I think there are scripts which need to be executed to create the BA and the Disco seeded reports. I am kind of confused about the whole think. Any pointers as to where to look foe the scripts would be really appreciated.
    I am using disco version 10.1.2.48.18.
    Thanks.

    Hi,
    You need to work though Metalink Note 313418.1.
    Rod West

  • HT4759 what hardware is/are used in order for the Apple: iCloud to run?

    what hardware is/are used in order for the Apple: iCloud to run?

    Apple - iCloud - Learn how to set up iCloud on all your devices.
    More Info Here  >  http://www.apple.com/support/icloud/

  • BT exchange accepting orders for FTTC but BT says ...

    Hi,
    When I check my local exchange (Spencers Wood) it shows that it has been FTTC enabled and is accepting orders, but when I put in my postcode (RG7 1FH) it shows as not available?
    I've seen the BT workers on the main road so I'm guessing they are still enabling cabinets, but the confusion comes about because certain addresses out on the main road were given an ETA (end of June) whereas I get nothing.
    Is there anyway to confirm my postcode will be covered, and when? or to confirm that it won't be covered (and why)? I can't seem to find anything online.
    Solved!
    Go to Solution.

    Hi LL,
    Thanks for the link.
    I'd already checked the ADSL availability checker and it shows no current FTTC availability nor ETA.
    When I check the exchange however I see it is available for orders and I know other premises have been connected.
    I'm trying to understand why my particular cabinet is not showing an ETA.

  • Production Order and Internal Order for each item of the sales order

    Hi
       I am developing Make To Order Report where I have to display the MTO Line Items and non MTO Line Items. For non MTO Line Items I have to display Internal order with Planned and Actual Costs and also Production Order with Planned and Actual Costs. Could anybody tell how to get the Internal order no and production order with Planned and Actual costs for each line item for a sales order.
    Thanks
    Naga

    Hi,
    You can get the Production orders, Planned orders, Internal orders generated for Sales order item from AFPO table (use fields KDAUF-Sales order number & KDPOS-Sales order item). Then to identify the order type use order category (AUTYP) from table AUFK.
    Once you have the Production/internal order, you can ge the cost from COSS and COSP table. Use the object number from AUFK to get the cost entries from COSS & COSP.
    You can use the following sample code as reference.
    Hope this is helps.. (Don't forget to mark it... )
    Form GET_COSTS                                                       *
    Get the material cost, labour hours and the labour cost for the      *
    sales order material.                                                *
    There are no interface parameters to be passed to this subroutine.   *
    FORM GET_COSTS.
      DATA V_OBJNR LIKE AUFK-OBJNR.
    DATA v_menge LIKE vbap-kwmeng.
      SELECT SINGLE OBJNR
        INTO V_OBJNR
        FROM AUFK
       WHERE AUFNR EQ AFPO-AUFNR.
      SELECT * FROM COSS
       WHERE OBJNR EQ V_OBJNR
         AND WRTTP IN ('01', '04'). " p_wrttp. "Labour Cost ( Plan, Actual)
        PERFORM GET_VALUES_FROM_COSS.
      ENDSELECT.
      SELECT * FROM COSP
       WHERE OBJNR EQ V_OBJNR
         AND WRTTP IN ('01', '04')         " p_wrttp
         AND KSTAR NE '0000510033'. " EQ p_kstar2.      "Material Cost
        PERFORM GET_VALUE_FROM_COSP.
      ENDSELECT.
    Get the unit cost of the production order by dividing the production
    cost by the order quantity. The result will be multiplied by the
    GL posting qunatity (Delivery quantity) to get the production cost
    for the quantity being deluivered.
      IF NOT AFPO-PSMNG IS INITIAL.
        OUT_REC-LABOUR_HOURS_ACT = OUT_REC-LABOUR_HOURS_ACT / AFPO-PSMNG.
        OUT_REC-ADDNL_LABOUR_HOURS_ACT =
                          OUT_REC-ADDNL_LABOUR_HOURS_ACT / AFPO-PSMNG.
        OUT_REC-LABOUR_HOURS_PLN = OUT_REC-LABOUR_HOURS_PLN / AFPO-PSMNG.
        OUT_REC-ADDNL_LABOUR_HOURS_PLN =
                         OUT_REC-ADDNL_LABOUR_HOURS_PLN / AFPO-PSMNG.
        OUT_REC-LABOUR_COST_ACT = OUT_REC-LABOUR_COST_ACT / AFPO-PSMNG.
        OUT_REC-ADDNL_LABOUR_COST_ACT =
                         OUT_REC-ADDNL_LABOUR_COST_ACT / AFPO-PSMNG.
        OUT_REC-LABOUR_COST_PLN = OUT_REC-LABOUR_COST_PLN / AFPO-PSMNG.
        OUT_REC-ADDNL_LABOUR_COST_PLN =
                         OUT_REC-ADDNL_LABOUR_COST_PLN / AFPO-PSMNG.
        OUT_REC-MATERIAL_COST_ACT = OUT_REC-MATERIAL_COST_ACT / AFPO-PSMNG.
        OUT_REC-ADDNL_MATERIAL_COST_ACT =
                         OUT_REC-ADDNL_MATERIAL_COST_ACT / AFPO-PSMNG.
        OUT_REC-MATERIAL_COST_PLN = OUT_REC-MATERIAL_COST_PLN / AFPO-PSMNG.
        OUT_REC-ADDNL_MATERIAL_COST_PLN =
                         OUT_REC-ADDNL_MATERIAL_COST_PLN / AFPO-PSMNG.
      ENDIF.
    Multiply the calculated Unit Production costs with the GL quantity to
    get the actual production cost of the quantity delivered.
    Calculation for Labour Hours
      OUT_REC-LABOUR_HOURS_ACT = OUT_REC-LABOUR_HOURS_ACT *
                                 OUT_REC-QUANTITY.
      OUT_REC-ADDNL_LABOUR_HOURS_ACT = OUT_REC-ADDNL_LABOUR_HOURS_ACT *
                                 OUT_REC-QUANTITY.
      OUT_REC-LABOUR_HOURS_PLN = OUT_REC-LABOUR_HOURS_PLN *
                                 OUT_REC-QUANTITY.
      OUT_REC-ADDNL_LABOUR_HOURS_PLN = OUT_REC-ADDNL_LABOUR_HOURS_PLN *
                                 OUT_REC-QUANTITY.
    Calculation for Material Cost
      OUT_REC-MATERIAL_COST_ACT = OUT_REC-MATERIAL_COST_ACT *
                                  OUT_REC-QUANTITY.
      OUT_REC-ADDNL_MATERIAL_COST_ACT =
          OUT_REC-ADDNL_MATERIAL_COST_ACT * OUT_REC-QUANTITY.
      OUT_REC-MATERIAL_COST_PLN = OUT_REC-MATERIAL_COST_PLN *
                                  OUT_REC-QUANTITY.
      OUT_REC-ADDNL_MATERIAL_COST_PLN =
          OUT_REC-ADDNL_MATERIAL_COST_PLN * OUT_REC-QUANTITY.
    Calculation for Labour cost
      OUT_REC-LABOUR_COST_ACT   = OUT_REC-LABOUR_COST_ACT *
                                   OUT_REC-QUANTITY.
      OUT_REC-ADDNL_LABOUR_COST_ACT = OUT_REC-ADDNL_LABOUR_COST_ACT *
                                  OUT_REC-QUANTITY.
      OUT_REC-LABOUR_COST_PLN   = OUT_REC-LABOUR_COST_PLN *
                                  OUT_REC-QUANTITY.
      OUT_REC-ADDNL_LABOUR_COST_PLN = OUT_REC-ADDNL_LABOUR_COST_PLN *
                                  OUT_REC-QUANTITY.
    Get the planned material cost from the total of the planned cost of
    the component materials in the production order confirmations.
      SELECT BWART MENGE MATNR SHKZG FROM AUFM
        INTO (AUFM-BWART, AUFM-MENGE, AUFM-MATNR, AUFM-SHKZG)
       WHERE AUFNR EQ AFPO-AUFNR.
        CHECK AUFM-BWART NE '101'.
        READ TABLE I_MBEW WITH KEY MATNR = AUFM-MATNR
                                   BWKEY = AFPO-DWERK.
        IF SY-SUBRC NE 0.
          SELECT MATNR BWKEY ZPLPR LPLPR PEINH
            FROM MBEW
            INTO I_MBEW
           WHERE MATNR EQ AUFM-MATNR
             AND BWKEY EQ AFPO-DWERK.
            APPEND I_MBEW.
          ENDSELECT.
        ENDIF.
        IF SY-SUBRC EQ 0.
          IF I_MBEW-ZPLPR NE 0.
            IF AUFM-SHKZG EQ 'H'.
              OUT_REC-PLANNED_MATERIAL_COST =
              OUT_REC-PLANNED_MATERIAL_COST +
                           ( I_MBEW-ZPLPR * AUFM-MENGE / I_MBEW-PEINH ).
            ELSE.
              OUT_REC-PLANNED_MATERIAL_COST =
              OUT_REC-PLANNED_MATERIAL_COST -
                           ( I_MBEW-ZPLPR * AUFM-MENGE / I_MBEW-PEINH ).
            ENDIF.
          ELSEIF I_MBEW-LPLPR NE 0.
            IF AUFM-SHKZG EQ 'H'.
              OUT_REC-CURRENT_MATERIAL_COST =
              OUT_REC-CURRENT_MATERIAL_COST +
                           ( I_MBEW-LPLPR * AUFM-MENGE / I_MBEW-PEINH ).
            ELSE.
              OUT_REC-CURRENT_MATERIAL_COST =
              OUT_REC-CURRENT_MATERIAL_COST -
                           ( I_MBEW-LPLPR * AUFM-MENGE / I_MBEW-PEINH ).
            ENDIF.
          ENDIF.
        ENDIF.
      ENDSELECT.
    Get the Future material cost per Unit by deviding the calculated
    Future material cost above with the goods reciept quantity to, then
    multiply the unit cost with the GL quantity to get the Future material
    Cost for the Quantity delivered. (Quantity in the entery from GLPCA
    Table).
      IF NOT AFPO-WEMNG IS INITIAL.
        OUT_REC-PLANNED_MATERIAL_COST =
           OUT_REC-PLANNED_MATERIAL_COST / AFPO-WEMNG * OUT_REC-QUANTITY.
        OUT_REC-CURRENT_MATERIAL_COST =
           OUT_REC-CURRENT_MATERIAL_COST / AFPO-WEMNG * OUT_REC-QUANTITY.
      ENDIF.
    ENDFORM.                               " GET_COSTS
    Form GET_VALUE_FROM_COSP                                             *
    Get the Material cost from COSP table.                               *
    There are no interface parameters to be passed to this subroutine.   *
    FORM GET_VALUE_FROM_COSP.
      FIELD-SYMBOLS: <FS> TYPE ANY.
      DATA: V_COMPONENT TYPE I.
    Cummulate the posting values of all the 16 period buckets as to get
    total production order cost. This is to handle the aprtial posting of
    prodction order values in diffrent periods.
      V_COMPONENT = 15.
      DO 16 TIMES.
        ADD 1 TO V_COMPONENT.
        ASSIGN COMPONENT V_COMPONENT OF STRUCTURE COSP TO <FS>.
        IF COSP-WRTTP EQ '04' AND COSP-KSTAR EQ P_KSTAR2.
          ADD <FS> TO OUT_REC-MATERIAL_COST_ACT.
        ELSEIF COSP-WRTTP EQ '04'.
          ADD <FS> TO OUT_REC-ADDNL_MATERIAL_COST_ACT.
        ELSEIF COSP-WRTTP EQ '01' AND COSP-KSTAR EQ P_KSTAR2.
          ADD <FS> TO OUT_REC-MATERIAL_COST_PLN.
        ELSEIF COSP-WRTTP EQ '01'.
          ADD <FS> TO OUT_REC-ADDNL_MATERIAL_COST_PLN.
        ENDIF.
      ENDDO.
    ENDFORM.                               " GET_VALUE_FROM_COSP
    Form GET_VALUES_FROM_COSS                                            *
    Get the Labour cost and Labour hours from the COSS table.            *
    There are no interface parameters to be passed to this subroutine.   *
    FORM GET_VALUES_FROM_COSS.
      FIELD-SYMBOLS: <FS1> TYPE ANY,
                     <FS2> TYPE ANY.
      DATA: V_COMPONENT1 TYPE I,
            V_COMPONENT2 TYPE I.
    Cummulate the posting values of all the 16 period buckets as to get
    total production order cost. This is to handle the aprtial posting of
    prodction order values in diffrent periods.
      V_COMPONENT1 = 15.
      V_COMPONENT2 = 111.
      DO 16 TIMES.
        ADD 1 TO: V_COMPONENT1, V_COMPONENT2.
        ASSIGN COMPONENT V_COMPONENT1 OF STRUCTURE COSS TO <FS1>.
        ASSIGN COMPONENT V_COMPONENT2 OF STRUCTURE COSS TO <FS2>.
        IF COSS-WRTTP EQ '04' AND COSS-KSTAR EQ P_KSTAR1.
          ADD <FS1> TO OUT_REC-LABOUR_COST_ACT.
          ADD <FS2> TO OUT_REC-LABOUR_HOURS_ACT.
        ELSEIF COSS-WRTTP EQ '04'.
          ADD <FS1> TO OUT_REC-ADDNL_LABOUR_COST_ACT.
          ADD <FS2> TO OUT_REC-ADDNL_LABOUR_HOURS_ACT.
        ELSEIF COSS-WRTTP EQ '01' AND COSS-KSTAR EQ P_KSTAR1.
          ADD <FS1> TO OUT_REC-LABOUR_COST_PLN.
          ADD <FS2> TO OUT_REC-LABOUR_HOURS_PLN.
        ELSEIF COSS-WRTTP EQ '01'.
          ADD <FS1> TO OUT_REC-ADDNL_LABOUR_COST_PLN.
          ADD <FS2> TO OUT_REC-ADDNL_LABOUR_HOURS_PLN.
        ENDIF.
      ENDDO.
    ENDFORM.                               " GET_VALUES_FROM_COSS

  • Link between Inbound Delivery and Sales Order for Third Party

    Greetings Gurus,
    My client is using a third party business model in a retail setting that fulfills sales order via purchase req --> PO --> Inbound delivery with GR posting --> customer billing document created through batch based on the delviery quantity ('G' in item billing relavence) --> vendor invoice reciept happens subsquently.
    My question is this, is there an inexpensive (performance wise) way to link the customer billing and the inbound delivery?
    Since the inbound is not in the doc flow i don't think VBFA will suffice. I think the best route would be via schedule line back up, but i have yet to find a link.
    There are process implications for this link for reporting and customer service which are a critical to the business. Point will be rewarded for sound advice.
    Thanks for your help.

    Hi Daneil,
    Through the document flow VBFA you can capture the PO number and the link for what you have asked can be found from table EKBE. check out for field BELNR.
    regards
    prasad

  • Failing to determine sales area in sales order for many BP's(Sold-To Party)

    Hi Experts
    In SAP CRM version 4.0, when I enter the Sold-to party (BP) in the sales order transaction, for some it determines the sale area automatically and for most of the BP's it is not determining.
    The Determination rule is organizational Model.
    The determination rule used is 91000141 (ZORGMAN_RA = Organization based on BP and trans.)
    Under Container tab in this determination rule, using simulate Rule resolution button, for some BP, it find the agent with green light when I place a BP in the Container element value field but for many BP's, it shows as No agent found.
    Org. data profile used is ZORGPROF_RA (Mandatory are sales Org, Dist. Ch, Sales Off.) and has set the above determination rule.
    In the Organizational model, the General attributes are country, currency, dist. Ch & division.
    So, Why Org determination is working for some BP and not for all.. I've checked each field in BP transaction comparing those BP where the org detrmination is automatic with those where it is not determining...but not able to find a clue also to trace it.
    we are introducting a sales order block in BP (under sales tab) for some specific Sold-To party and in webshop when these Sold-to party are tried to place an order then an error message will show that this "Sold-To party has a  sales area block".
    To achieve this, first the org determination should work automatically for all BP's otherwise for those BP which cannot detrmine the sales area in the sales order transaction will allow to place order (which should not be in our case)
    Can any one throw some light in this case..please do ask if you need more clarification in my question.
    Thank & Regards
    Pravin Babu

    Hello Maggie
    Thanks for your reply.
    I found the cause of the failure, in not determining  the sales area  automatically in sales transaction for some BP's.
    It is due to the BP settings, under sales area view, under organization tab, by pressing 'Choose sale area" button, I can see the sales Organization has uncheck for 'sales'  but it is check for all others - shipping, billing, partner, status, Organization.
    It is due to -> no data mainatined for the BP under Sales tab, after mainatianing it, I can see the check by pressing the 'choose sale area under organization tab.
    Now, in Order transaction, the sale area is determined automatically when I enter the BP.
    So this was the reason that some BP's was able to determine the sales area automatically but not for others in the sales transaction.
    Regards
    Pravin
    Edited by: Pravin Babu on Jul 14, 2010 3:49 PM

  • Contract and release order for service: connection and field selection

    Hi Experts,
    I have some questions about contract and release order (PO against contarct) for services.
    A -I want ot know if there is any standar way to oblige the creation of a release order to a contract. I mean i had some users  that create a release order w/o reference to the contract and it works fine anyway. The document is a copy of the NB. I cant find the way to reference the 2 purchase document clearly.
    B - Using a release order, when copying the item from contract catalogue by clicking the service selection icon,  description and net price are correctly copied:  the description is not modifiable  but the net price can be change by the user. Can some body explain me where to modify this setting? where is the field selection and where in SPRO step by step please,
    thanks in advance
    Livio

    ... Nobody is so nice to suggest me any solution?  
    For the point A probably the only way is user-exit.... but for B i don't have any idea, please let me know
    thanks
    Livio

  • Win XP Pro drivers and install order for Qosmio E10

    Hello,
    I bought recently Qosmio E10 in Korea. The OS is Korean Win XP Home. I would like to change it, so I guess I have two options:
    1. Get a restore CD in English. But I read that Toshiba has the strange rule not to give restore CD with different language. I wrote them, they don't answer for now.
    2. Install Win XP Pro myself (I have only this license). The issue in this case is to be able to get all the drivers I need. I found good drivers on several locations:
    On http://www.toshiba.co.kr, but I worry that these drivers are for Korean XP.
    The other place is http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp
    In this place, most of the drivers are for Media Center edition. There are drivers for XP Pro, but they are not so many and there is no install order. For example, there is no NVidia driver, while such driver is available for the media center. Maybe I can use Media center drivers on XP Pro?
    So my question is: What drivers I have to use and and what order to get a proper working XP Pro. It would be nice to know where to download QosmioUI. I found the Linux player and I will install it, but I want also to have the player in Windows.

    Hello
    As far as I know the software is bundled on notebook and if you buy a notebook you buy automatically OS and license to use it. That means that you can not order a recovery DVD on another language. Qosmio E10 is delivered with Windows MCE2004 SP1a.
    The only possibility is to install Microsoft Windows XP OS (full version, with or without MCE), and then you must install all necessary drivers, tools and utilities separately.
    For English language you can find them on http://eu.computers.toshiba-europe.com under Support & Downloads.
    Bye

  • Sale Orders and Delivery Orders for a Particular Plant?

    Hi,
       Could you please tell me which tables or reports are to be used to
    find
    a) Sale Orders for a particular Plant
    b) Delivery Orders for a particular Plant?
    Regrds,
    Binayak

    You can see sales order for Particular Plant by using VA05,  in that report you can find plant column.  On that column you can sort out.
    In Vl06 you can find the deliveries according to the Shipping point.  Each shipping point is assigned to plant.  So, indirectly you can find the delivered orders from the shipping pont and plants
    Reward points if it is helpful

  • Adobe not accepting order for lightroom6

    Hi all,
    been trying to order LR 6 since the launch. got two mails saying my order can't be approved. have been with adobe for 12 years.
    have just tried to upgrade LR. chat line completely useless. they only look at the canceled order and tell me that is has been canceled.
    valid creditcard, valid user account.
    don't know what to do further. cant see any option to contact them other than the chat.
    anybody any ideas?
    cheers Stephan

    You don't have to enter any passwords to update Reader. Where are you being asked for one?

  • Displaying stock and sales orders for aggregated product in Product View

    Hello,
    We have successfully created an SNP aggregated planning scenario which uses CTM to plan purchase requisitions and planned orders at the aggregated product level.  The disaggregation to the sub-product level is working as well.
    We have one issue.
    We would like to be able to use the Product View (SAPAPO/RRP3) to view the sales order and stock information for both the aggregated products and the sub-products. 
    Currently, the sub-products (which are the materials in the stock and sales orders functions in ECC) show the disaggregated planned orders and purchase Reqs, and the sales order and stock information in the Product View.
    The aggregated-products (which aren't included in the ECC sales order and stock functions), only show the aggregated planned orders and purchase Reqs. 
    Is there a Product View configuration which will show the aggregated stock and sales orders in the aggregated product view?
    thanks in advance for any comments and/or assistance.
    Sarah

    Hi Sarah,
    The Product view configuration is available under customisation menu under the below path.
    spro > sap guide > APO > supply planning > PPDS > settings for order view/product view
    Under this, you can configure your customised product view structure.
    Regards,
    R. Senthil mareeswaran.

  • Planned Order for stock and planned order for customer requirement

    Hello everybody
    I want to make a different, in MD04,   between the planned order for stock and the planned order created for a customer requirement
    Thank for your help

    Hi,
    True planned order are generated for both the cases but the planned order generated for sales order will have sales order number in the below column and for stock will show independent requirement. Mainly no sales order reference will be there for make to stock scenario.
    Hope it will help.
    Regards,
    Alok Tiwari

  • Link between process order and sales order for planning strategy 52

    Hello,
    I investigate the possibility of a link between "sales order" and "planned order / process order" for the usage of planning strategy 52 (planning w/o final assembly, make to stock).
    I know, this is not conform to the basics of planning strategies (EITHER make to order OR make to stock) and I suspect it would be a modification. Of course we have the alternative "make to order" - strategy 50, but we do not want to use individual customer stocks.
    Is anybody there with similar customer requirements or project experiences?
    Thanks in advance,
    Joerg
    Message was edited by:
            Jörg Demtschuk

    Hi Jorg,
    To my understanding if you need hard pegging then in SAP only Individual requirement is possible.
    Or else you need to create a custom transactions/table to identify Sale order and when ever a process order is created by selecting the sale order record, the process order detials should also get updated against that.
    You need to take the help of ABAP expert for this,
    Regards,
    Prasobh
    Reward points if this was useful

  • How to create service items and sales order for service contracts.

    Hi,
    I have created item using Purchased Item template and one more item(service item) using service /warranty program template. Then I have used these items to create sales order with service item in it and closed that order , but Iam not getting this order in service contracts. Is this right way to create sales order for service items. I
    item name:- personal_computer
    copied from purchased order template. service is enabled and install base is checked and enable service coverage is enabled.
    item name:- service_item
    copied from service /warranty program template
    service is selected to inactive,
    service type: service
    duration: 1 year
    template: Gold
    and saved the item.
    Then I have used these two items in sales order for service contracts. But that sales order is not hitting in service contracts. Is there any error with item creation.
    Thanks,
    Bharat G.

    Following SAP Notes to be referred for Service Tax:
    1.     778976 u2013 Service Tax and Ecess on Service Tax
    2.     1032265 - SEcess on Service Tax
    Regards
    AK

Maybe you are looking for