BT infinty WiFi problems since firmware update jun...

hi guys
ive noticed a recent firmware update on my homehub 3
since ive had this update the wifi has got to pot
its slow and unstable on all my laptops and phones via wifi
the cabled connection is fine, its just the wifi playing up
has anyone else had this recently and if so , are they doing anything about it ?

ok
been on the phone to the helpline in india
i will say the guy spoke very good engish and was very helpful
basically you have to use a pin to press the reset button on the home hub
since it restared it seems to be ok, but i should mention as this fault seems to be intermittent hes going to call me back in a couple of hours and check.
ill let yas know

Similar Messages

  • Nokia N82 wifi problem after firmware update

    Phone is restarting while connecting with WAP
    and invalid server name while putting wep key

    23-Nov-2006
    03:11 PM
    mobile_maniac wrote:
    Ishvin, I'm sure I've read somewhere that the firmware on your phone can't be downgraded.
    One question though... if the old 100% used to hurt your ears, do you really need the old volume levels back?! That may even be the reason it has changed if Nokia thought the same thing... I'm sure they wouldn't want you sending them a bill to get your hearing fixed! :-)
    yes this is true but stil i want it loud enough so i can't hear it outside. i just hope they put the volume back up on the next firmware

  • Wifi problems since 10.5.8 Update. Even after Snow Leopard Upgrade.

    Wifi problems since 10.5.8 Update. Even after Snow Leopard Upgrade.
    Is there any way to use a 10.5.7 wireless .kext files on Snow Leopard? And where can I find the files?

    Ok, I have the fix!! After several frustrating days it finally just works.
    The process:
    Upgrade your Macs to 10.6 (Snow Leopard)
    Powercycle your modem AND time capsule / airport TWICE
    Reset your time capsule with a pin or paperclip on the back
    Follow the prompts to setup your time capsule / airport access
    -- On your Macs
    Go to System Preferences > Network > Airport > Advanced > TCP/IP
    Click "Renew DHCP Lease" then click "Ok"
    Click Apply
    Turn off Airport
    Turn Airport on
    IT WORKS!!!
    One of the magical people at tech support walked me through it earlier today. The whole process took about 1.5 hrs because Show Leopard takes about an hour to install on one machine.
    Hope this helps-
    Joshua

  • N96 Photo Gallery Problems @ V20 Firmware Update

    After updating my 96 to v20 i'm found broken icons/thumbnails in my gallery rather than the original pictures that we're there before the update. When i tried to delete i got an error message, the files didnt delete and remained on the phone so i was left with a gallery fully of nothing but broken icons/thumbnails. I tried back up restore from the back up file created on the sd card rom file manager but to no avail the problem remained the same.
    Some thoughts we're juggling and i decided to do the thre finger reset which took the phone completely back to as it was out've the box and start from scratch restablishing the phone. After all all my main stuff, my music, was on the sd card so removed the card and done the 3 finger reset.
    The phone was restablished, running fine etc sd card inserted and off i went with a totally clean, error free phone...oh and immediately done a file manager back up to over write the old one. Yes i'd lost some pictures but hey the fleets of useless unmanagable borken icons had gone so felt i'd removed the corruption/erros off the phone.
    Sadly not. Now when i then took pictures all is ok on taking the piccy and viewing immediately but when i returned to the gallery 5 mins later i found all the newly taken pics are also broken icons/thumbnails. File manager back up restore was carried out and the broken icons etc vanished but after that when i took pictures they quickly turned into broken icons in the gallery area. Once again sd card was removed and 3 finger reset done.
    Now when i take pictures they are not even showing as captured in the gallery however are showing in the file manager.
    Anyone else having such problems since V20 update ?? Anyone have any suggestions or managed to resolve this one ??
    In addition to this i've noticed that some of my podcasts cannot no longer seen by music player however can be seen through file manager.  I'll explain the podcast problem in another posting when i get chance.

    I've got a similar problem.
    I'm not sure exactly what you mean by "broken links", but since installing the v20 firmware, i have frozen or blank entries in some parts of my multimedia menu.
    The 'last captured' entry in the 'photos' tab says "no images or video" and displays no image. This does not change when I take photos. The 'captured' entry also displays no image but accurately states and updates the number of photos in the gallery.
    In a stranger twist, the 'now playing' entry in the 'music' tab now permanently displays the name and image of the last song I was playing before the firmware upgrade.
    Contrary to these problems, the 'last viewed' entry in the 'video' tab accurately updates itself when I watch videos.
    This is the first instance i've discovered of someone with a similar problem and so far no solution. I'm sure we're not alone. I imagine it's just some little fault in the firmware (God knows it wouldn't be the first in the N96's history) but what are the odds of Nokia distributing a fix?
    Come on Nokia? How 'bout it? Anyone else got the same problem or even a fix?

  • Many problems since the update - help?

    Hi all,
    Let me start by saying that I am, for all intents and purposes, a huge Apple booster. I have a new 24" iMac. I have an Airport Extreme. I have an iBook G3 I use for travel (I'm a journalist) and recently handed down my old G3 iMac to my son after loading it up with RAM. I extoll Apple products because they are elegant and simple, and a pure pleasure to use.
    Unfortunately, this hasn't been my experience with Apple TV since the 2.0 update.
    My problems since the update include:
    1) My Apple TV regularly "hangs" when trying to connect to ATV content. About 50% of the time when I try to play a song or podcast or movie preview -- whatever -- instead of connecting to it, I'll get an "Accessing iTunes Store" message which, after about 30 seconds of the little spinning icon, will inevitably revert to "The iTunes Store is currently unavailable. Try again later." I have to "back out" of the submenu (e.g., "Movies" or "Podcasts" or "TV Shows"), and enter another, different submenu before it will connect. I've tried all combinations of Airport settings ( both 2.4 Ghz and 5Ghz N, mixed b/g/n), and many different channels, but this keeps on happening. I have troubleshot my network connection with my ISP, and have tested the integrity of the line at DSL Reports. The connection and line quality is fine. Connection strength: signal = 54; noise = 92. In other words, decent.
    2) When attempting to play HD Trailers, it is now hit and miss whether or not they will load. Instead of a blue progress bar, my screen goes black for about 15-20 seconds. (During this time, I cannot exit out of the action by pressing 'menu' on my Apple remote; it is effectively unresponsive.) After the 15 seconds or so are up, I get the following message: "Selected content is not available. Format is not recognized" -- or something close to this. After I exit, play an SD trailer, and then hit into the same trailer again, it will often (but not always) work.
    3) Album cover art flips often "stick" when turning, especially when playing songs with long, scrolling titles. (I spent a lot of time on the phone with an Apple TV Product Specialist and, after he replicated the issue, he passed on his findings to the Apple Engineering. It is, I was informed, not high on their list of priorities
    4) Unplugging and then replugging the ATV to reboot causes a small electrical spark. Needless to say, I don't tempt fate by doing this any more, and instead use the "-" and "menu" restart method.
    All in all, a very disappointing experience of late. Very un-Apple.
    By the way, connecting to YouTube videos and Flickr contacts ALWAYS works. No problems at all with any non-Apple site accessed through the ATV. So the problem lies with Apple.
    Is anyone else experiencing similar difficulties? I'm at my wit's end with this thing. Never thought I'd be saying that about an Apple product. But I want to try and solve it, so I'm asking for help. If nothing can be done, I'm going to ask Apple to replace it, or return it.
    Thanks in advance for your thoughts.

    Rick Rouse wrote:
    Trust me you are not alone. Apple's "not high on their list of priorities" response is outrageous.
    That was a paraphrase. The exact words, I'm afraid, I didn't write down. I wish I had, though. It was truly a beautiful example of corporate bafflegab. Something like: "since this only affects the visual aspects of the unit and not its overall performance" -- I told the (very nice) product specialist that the Apple TV was pretty well ALL AND ONLY about visuals. (FWIW, he agreed.) Anyway...

  • I can't wake up my MacBook without power cord since firmware update

    Even though my battery charges fine and it's on 99% full
    it won't wake up without a power cord.
    when I walk away from the computer and close the lid, when I open it again and hit the space bar nothing happens. I have to hit the power up button and still nothing happens. then I plug in the cord and I get the grayed out screen and see the energy coming back with the white stripes loading across the screen.
    Now I just pulled out the cord with it on and sat there for 1 minute to see what happened. The computer shut down! My MacBook effectively can't get the energy off my battery. What is going on??
    This just started 2 days ago right after it asked me to load new firmware. I don't even know why I needed to update the firm ware but all I know now is my Macbook can't live without the power cord now and I was fine before. HOW DO I UNINSTALL that FIRMWARE UPDATE?? or HOW do I fix this??
    please help me

    My macbook is presenting the same problem after firmware update. Resetting the smc didn't work, as well as resetting the pram and repairing permissions in safe boot mode. Help, please... my mac suddently turned to be a PC.... simply not working!!!!
    I tried to clean the battery plate, as well, but i am able to wake my mac up only with power cord plugged in... after restarting the computer, by pressing the power key for 10 seconds, the battery works pretty good...

  • Problems since the Update on Flash Player 11.0.1.152 (Mac)

    Hello.
    I have some Problems since I updated my Flash Player.
    I have a MacBook Pro (Mid 2010 13" 2.66GHz). I played a Flash-Game named Zombie Lane on Google+. Since the Update it judder. A friend of mine has the same Macbook Pro, but a Mid 2011 model. As you maybe know, this model is not mentionable better.
    But he does not have the same trouble as me.
    If i look at the activitiy-display of the Mac, I can see that the Flash Player uses 80-100% of my CPU with an overall User-Usage of 40-50%. Isn't that a little bit to much?
    I also delete the Flash Cache and uninstall Flash to install it again. But that was not a solution.
    I hope you can help me...

    I have spent countless hours trying to get my flash player working and have tried EVERY kind of possible answer through many forums and websites to solve this. Does adobe have anything currently that will solve this flash player problem?? I have the lastest version of Safari 5.1.1. and I have the lastest version of adobe flash player 11.0.1.152, I have even tried the debugging installs adobe put out for flash player. I have tried the "working around lion flash player video thing" where you try private browsing. I have tried going into system preferences and entering into the flash player settings in the storage tab the allow this sites, etc. NOTHING HAS WORKED!! I still get my local storage pop up message whenever I try and watch a you tube or any site that has flash video on it, that flash player settings box still pops up and is stuck on my screen and I cant click allow or deny or get it off. So many people I have read have the same problem and I only the same answers pop up that I have tried again and again, does anyone have a real resolve to this yet??? PLEASE PLEASE PLEASE HELP.

  • My iphone will not recognize any usb cables. I have tried 3 official apple ones and 2 different plugs. Ive tried plugging it into my laptop but will not find the phone. it has had problems since i updated my ios. Battery has been replaced.

    I have tried 3 official apple ones and 2 different plugs. Ive tried plugging it into my laptop but will not find the phone. it has had problems since i updated my ios. Battery has been replaced. Any suggestions would be fantastic

    test if it charges with an ac charger
    test if it's detected by another computer
    if it's no to both then likely the connector is broken
    if it's yes to both thne it's likely your computers itunes install which is the problem

  • TS1398 I have an AT&T iPhone but only use wifi. Since I updated my phone to iOS 6.0 I cannot receive text messages from other iPhone users outside wifi range. What is the issue?

    I have an AT&T iPhone but only use wifi. Since I updated my phone to iOS 6.0 I cannot receive text messages from other iPhone users outside wifi range. What is the issue?

    Check Settings>General>Cellular to be sure you have Cellular Data set to On.

  • Ipad 2 WiFi problems since ioS 6 update

    Any news? I have tried everything that I could find on any thread out there. Apple? Apple?

    iOS 6 Wifi Problems/Fixes
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting
    http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet
    http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
    Try This - Renew IP Address:
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • 10.4.8 - Six different Macs all with problems since the update...

    We run a business which has six different Macs... all relatively new (3 yrs). Typically we run the auto updates, because that's what we're supposed to do, and we experience little if any problems.
    This last update (10.4.8) has caused nothing but problems - little system hickups here and there. Programs hang. Strange screen anomolies. Laptop trackpad issues (clicks and selections when none were made). I have to say that if Apple is going the way of the Windows machine I'm not impressed - at all. Consider thoroughly test your updates before releasing them on your loyal client base. Seems like a simple concept.
    Is there anything that can be done to limit the impact of the recent update. Backtracking to the last version is not an option, although setting up the system to allow for this will become a part of our workflow in the immediate future.
    C Jones
    dual 2.0 G5's, 4.5 GB memory, ATI x800 Graphics card Mac OS X (10.4.8)
    dual 2.0 G5's, 4.5 GB memory, ATI x800 Graphics card   Mac OS X (10.4.3)  

    Started having problems with my Imac first power supply (replaced under warranty), then HD/Boot issue. I ran disk repair and was advised by support to try to do an immediate backup (purchase external HD) and reinstall OS from CDs. Although I purchased an external firewire HD that day, my HD failed the next day (unable to backup onto new Glyph in time) so I lost EVERYTHING.
    I investigated data recovery options, but just waaay too expensive. So yes, there's nothing like a good backup plan. Lesson learned.
    Today (after a nightmarish struggle to get the computer repaired--different issue) I finally got my computer back with a new HD and logic board.
    So, I rushed home to start reinstalling OS and software. First installed original OS X Panther disks which incl Garageband, no problems (also set up internet to try to register all software), checked for firmware update (none), ran software updates, rebooted). Then I installed OSX Tiger (ran software update...10.4.8, etc, ), started Garageband new song one track piano (using an M-audio keyboard controller i had hooked up but had not yet installed the software drivers) and it worked! Very cool. everything was time-consuming but seemed to be working fine (and why wouldn't it on a brand new HD with all software installed via CD and all updates recommended by Apple?)
    Then, I decided I would next install the GarageBand JamPack CD (before attempting to tackle external HD setup, Pro Tools, synths, etc). So, I saved the "testsong" when closing and received error "Gband unexpectedly quit" and it stopped responding (spinning color wheel). After a few minutes I was able to force quit the application (really didn't think anything of it). Then I rebooted (since it did crash, I did go back and look for a possible software update but said I was up to date).
    I tried to install Gband Jam Pack (1) failed about 95% of the way through while I was trying to complete product registration online. Then I rebooted, tried again failed (during which my internet also stopped responding). I had to then reset the wireless router and cable modem, looked for help online and rebooted.
    I then ran repair disk permissions (it looked like it did a few updates but I did not see any alarming "errors" flash across the screen). I rebooted and tried to install JamPack again, failed, and rebooted (and looked online for another suggestion).
    removed folder: application support/gband/loops/Gband Jampack/ folder into trash then tried to install jampack again, failed, and rebooted.
    removed folder again, ran repair disk utility (did not look like it made any updates or report any errors), rebooted. Tried to install again and failed and rebooted, emptied trash and rebooted again.
    I am now running repair disk utility one more time (10 solid hours into the software installation process ....my internet just stopped responding again so I apparently have to reset the wireless router again just before trying to send this message). I will run repair one more time, and completely power off computer for a couple of hours while I grab some sleep before work.
    But, now I am seeing all these SCARY stories about the 10.4.8 update I just installed?!.
    Are these problems related? Can someone please help me? Surely it cannot be this difficult. Thank you!
    Imac G5 1.8 1.25 GB RAM   Mac OS X (10.4.8)  

  • WIFI problem despite OS update 1.05.2304

    Hi,
    I bought 2 weeks ago the playbook 32GB. It worked well.
    Since I updated the last version, my playbook lost wifi connexion.
    All other device from my colleagues works well :  iPad, Xoom, iphone, blackberry torch etc...
    Please : dont give me a technical information. I'm not a geek.
    I just need a simple answer. Is it a problem that can be solved simply or do I have to wait a new update for the Playbook.
    All other device on the world works well in the wifi area... wy not my playook ?????
    Solved!
    Go to Solution.

    My guess is that it has something to do with your specific wifi router and how it interacts with the Playbook. I have had a similar issue with my Netgear WNR2000 router. All the other devices in my house (iPhone, iPad Touch, XBox 360, various Windows laptops, etc..) have no problem with their wifi connections. My Playbook doesn't seem to have problems with the many other wifi routers I connect with at other locations.
    That said, I will say that it has been happening much less often since I made a few tweaks on my router and I got the v1.0.5 update on my Playbook. It used to happen constantly, to the point where I'd set up a second router in my house just for use when on my Playbook. It now only happens once or twice a day and it quickly logs back in on its own.
    The first thing I would check is whether other routers give you an issue or if it is just this one you're having problems with now. Have you tried using it anywhere else and see if it is a problem everywhere or just with this specific router?
    Next, I'd ask you what type of router are you using? What type of security are you using? (WEP? WPA? WPA2?) I have read many people say they switched back to WEP from WPA2 and it solved the problem. Personally, I don't want to do that because I like the WPA2 higher level of security.
    Hope this info is helpful in some way. Will look forward to hearing your thoughts..

  • Wifi problem since upgrade in iMac 27"

    Since a copuple of days my wifi stop work suddenly. I can't detect any wireless network on my imac 27" with 10.7.4. Must restart to work. I Reinstall my OS no problem since updated to 10.7.4. Can somebody hel me? Please.

    Hi all,
    To start a point on the server changes between 3.2 and 4.1 :
    * We went from a 32-bit Ubuntu server to a 64-bit and have followed the installation procedure of 4.1 by changing the settings of linux such as requested
    * The problems described are only in Apex, so we repeat an installation now in case we made an error
    I tried to use TKPROF but I did not find a lot of information in the result output so I gave up. I certainly did not understand all !
    I use the view apex_workspace_activity_log to find something ... and I find a lot of things but nothing directly closed to the problem.
    At this point I have to explain our applications organisation :
    * A connexion with validation via LDAP (AD) (no problem)
    * A core application as a crossroads to other applications (via URL and &SESSION.)
    It seems that this central application have never log in apex_workspace_activity_log ? very strange, like this application are in cache ?
    In addition, we are often disconnected after some idle time.
    The problem is like a random time out (10 to 20 seconds) whatever the application used (builder or user application). this is not a problem specific to an application.
    We have no idea to search ... so we test a new install, maybe parameters on Ubuntu ?
    Thanks for your answers.

  • AirPort Utility Opens By Itself EVERYDAY Since Firmware Update

    Ever since the AirPort Express firmware update a few days ago, the AirPort Utility opens everyday by itself, usually in the AM and under no specific set of circumstances. It always goes to the same info regarding sharing music and only gives me the option to continue to set up the AirPort automatically. When I quit and then check the settings manually, the music settings seem to be set up just fine.
    Anybody else have this problem? Doesn't seem like the firmware update could affect the software on the Mac, but I have no other explanation.

    In Airport Utility, check the preference menu item. There is a checkbox to monitor airport devices. If a device reports a problem, Airport Utility will launch automatically. Maybe somehow this option is turned on??

  • Problems since last update... default browser, scanning probs with Laserjet

    This may be general, but I don't have a lot to go on. Also, two issues may or may not be related.
    1) Since the last update, which included a firmware update, when I reboot my Mac my net apps (Adium, Firefox, etc) always get taken out of default, and I have to make them default again when I first load them. This is annoying... anyone know how to make this stop?
    2) Not sure when this started to happen, so it may have been associated with the update, but my HP Laserjet 3055 will no longer scan documents. Printing, fax, etc., all work. Just can't scan anymore. In fact, in HP Director I can't even get the "Fax" button to activate (it's grayed out now).
    Any thoughts are appreciated.

    Hi, with regards to #2, I had the same problem after the latest update and the following cured it.
    Use the HP uninstaller and delete all HP files, empty trash and restart. Then download and install all needed HP software/files and install. Restart and all should be ok.
    Good luck with #1

Maybe you are looking for