BT Inifinity Speed Estimate (New Exchange) - seems...

Hi
I am pleased to announce that as of today I have been able to order BT Infinity 2 on the newly enabled exchange at Desborough (EMDESBO) for installation on August 21st.
My current ADSL speed is roughly 13mb down 1.1 up. Stats at the bottom of post...
I know we are 2.1km from the exchange, with the cabinet only 0.7km away (being a new estate you can see the trench path for the cabling).
The initial estimate for BT Infinity is 19.8mb down, 2.9 up which frankly seems extremely stingy and low. Is this truly a reasonable estimate or is it because of it being a newly installed exchange and they don't want to overegg it? Do they ramp the speed up over time?
Any views or experience elsewhere appreciated. previous BT engineers have said that 30 out of 38 on Infinity would be expected with 60 on Infinity 2.
Seems slow?
Regards
Gavin
ADSL Stats
Line state:
Connected
Connection time:
23 days, 00:19:07
Downstream:
12.96 Mbps
Upstream:
1.129 Mbps
ADSL Settings
VPI/VCI:
0/38
Type:
PPPoA
Modulation:
G.992.5 Annex A
Latency type:
Fast
Noise margin (Down/Up):
6.0 dB / 5.7 dB
Line attenuation (Down/Up):
27.9 dB / 15.8 dB
Output power (Down/Up):
20.4 dBm / 12.6 dBm
FEC Events (Down/Up):
0 / 0
CRC Events (Down/Up):
49126 / 297
Loss of Framing (Local/Remote):
0 / 0
Loss of Signal (Local/Remote):
0 / 0
Loss of Power (Local/Remote):
0 / 0
HEC Events (Down/Up):
130630 / 204
Error Seconds (Local/Remote):
35374 / 200

Gav678 have you tried connecting your hub to the test socket then rechecking your connection speed your low connection speed could be caused by an internal wiring issue it is quite common with ADSL services i you would care to repost on the speed and connection board you will get all the help you need to improve that speed
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

Similar Messages

Our exchange server crashed and we lost all contact and calendar data. We found an app to get the contacts off of people's phone to import but can't find the same for calendar. How do I get my calendar info off my phone and in to new exchange server?

Our exchange server crashed and we lost all contact and calendar data. We found an app to get the contacts off of people's phone to import but can't find the same for calendar. How do I get my calendar info off my phone and in to new exchange server?

You'd have to think through this, but it seems like if you are using Outlook, and the items vanished from the Outlook client as well as the server,that you could re-populate Outlook using iTunes.

Old DB in Queue Viewer of New Exchange server

Exchange 2013 SP no DAG. A couple of days ago we migrated from one exchange 2013 sp1 server to another exchange 2013 sp1 server. This new server seems to running fine with the exception that the old DB is in the new server's queue viewer:
New DB is mailbox database and the other DB is the old DB. How do I get the old DB out of the queue. The old exchange server has NOT been removed/uninstalled. We want to keep the old server (powered off) for a couple days to make sure things are working
OK.

How did you remove the old server you migrated from?
Ed Crowley MVP "There are seldom good technological solutions to behavioral problems."
We have not removed it as of yet because we want to make sure everything is working correctly before we uninstall exchange.
@Amy, yes the old DB shows up when running that command. The server that holds that DB is powered off and ECP says it is dismounted.
Also, it seems this old DB, its message count keeps going up in number. When I suspend that DB, all SMTP mail stops. I dismounted the old DB on the new server and when I try to mount it again on the new server:
Failed to mount database "Mailbox Database 0119046452". Error: An Active Manager operation failed. Error: The database
action failed. Error: Operation failed with message: MapiExceptionDatabaseError: Unable to mount database.
(hr=0x80004005, ec=1108)
Diagnostic context:
    Lid: 65256
    Lid: 10722   StoreEc: 0x454
    Lid: 1494    ---- Remote Context Beg ----
    Lid: 45120   dwParam: 0x2125B5C
    Lid: 57728   dwParam: 0x2125C08
    Lid: 46144   dwParam: 0x2125C76
    Lid: 34880   dwParam: 0x2125C76
    Lid: 34760   StoreEc: 0xFFFFFB4A
    Lid: 41344   Guid: f73fb9e2-08c8-4ff9-be1c-5f1da4b9c8f1
    Lid: 35200   dwParam: 0x234C
    Lid: 46144   dwParam: 0x2125FD1
    Lid: 34880   dwParam: 0x2125FD1
    Lid: 54472   StoreEc: 0x1388
    Lid: 42184   StoreEc: 0x454
    Lid: 1750    ---- Remote Context End ----
    Lid: 1047    StoreEc: 0x454      [Database: Mailbox Database 0119046452, Server: OLDSERVER.domain.com]
    + CategoryInfo          : InvalidOperation: (Mailbox Database 0119046452:ADObjectId) [Mount-Database], InvalidOper
   ationException
    + FullyQualifiedErrorId : [Server=NEWSERVER,RequestId=086534c0-9a9b-421b-b7ca-afb27be4aa7b,TimeStamp=11/27/2014 12:4
   7:40 PM] [FailureCategory=Cmdlet-InvalidOperationException] F20EA44B,Microsoft.Exchange.Management.SystemConfigura
tionTasks.MountDatabase
    + PSComputerName        : newserver.domain.com

New Exchange Migration Does Not Work Properly After Old Exchange Services Shut Off

Moved Exchange 2013 SP1 mailboxes, system mailboxes, public folders and OAB to new server with Exchange 2013 SP1. Followed all the suggestions here:
https://social.technet.microsoft.com/Forums/en-US/1bdf67a1-ad0e-4e96-922f-3778d6bd8e98/move-exchange-2013-to-new-virtual-server-including-settings?forum=exchangesvrdeploy
Problem is when we shut off the old exchange server services, no mail flows and can not reach OWA. It seems as though the servers are "coexisting". I say coexisting because all the firewall rules point to the new server, all the settings in ECA/ECP
point to the new server, all the DNS records point to the new server. We need to be able to run exchange on the new server without the old server running. Is there something I left off?

I would hold up on decomming the old environment until you make sure you have all the dependencies removed from it. I have done a number of migrations to 2013 and I always shutdown the old environment for atleast a day to make sure I caught everything.
When you say you can't reach OWA is that internally or externally? As for the mail flow thing, I think you might need to check your send connectors and receive connectors. These don't get created/updated
with Also, if you have a 3rd party hygiene solution (like a postini or mimecast) you will need to contact them and have them allow the new public IP for the Exchange 2013 environment (or setup a NAT Rule that translates old public IP to new Exchange
Server. )
Ok, i turned off the old server and email DOES flow to and from intranet/internet. And i can get to most OWA pages. However, there is at least one that i can not make it to. We host email here and every domain has this syntax:
https://mail.theirdomainhere.tld
Like i said, the external DNS records for this particular domain does reflect the public ip of our router. Our router then sends that connection to the new exchange server.

I have an iphone 5 with ios 6. I am trying to setup a new exchange email account. I need the backslash but it is not available. I can find it on other apps but not when trying to set up the mail account. (it is not on the keyboard)

I have an iphone 4s with ios 6. I am trying to setup a new exchange email account. I need the back slash but it does not show up on the keyboard. I know it is supposed to be on the +key (and is for other apps) but for some reason it is not available when setting up an email account. Is this on purpose or am I doing something wrong?

I can tell you that with Sprint their coverage area isn't as good as Verizon or AT&T.
Are you sending these imessage while on wifi or cellular data? Also your husband would need to be in a good coverage area.
Usually when imessage is unavailable it will send it as a text. Does your husband receive your imessage as a text?

How do I install a new Exchange account with the same address as my old Exchange account and have my bcc mail not go to the old account?

I have an iPhone 5s running iOS8 and an iPad, up to date. I have recently changed my mail server but not my email address. My "old" mail account is an Exchange account and I have also set up a "new" Exchange account with the same address but with the new mail server details. When I receive outside, third party emails they are routed correctly to the "new" Exchange account but when I bcc myself or receive other emails from any account with my domain name the emails are routed to my "old" Exchange account. I have changed the default account settings to the "new" Exchange account. Also, if I send myself an email from my laptop, through the new mail service provider, it is routed correctly on my laptop but incorrectly on my iPhone and iPad. It appears as though the Apple products have cached my email address and routing and won't look to pick up the new mail server details. I don't see anything in the mail account settings or contacts that allows me to refresh or clear the cache. The result is I now have mail in 2 accounts. If I can get the misdirected mail from the odl account to the new one I will then make the old account inactive. Anyone have any ideas on this one?
Thanks in advance for your time and ideas,
DAA

Can you set up a rule in your old account to forward mail to your new account and then delete it from the old account?
(1012)

New Exchange 2013 SP1 install, can't get ECP to display

Hi all,
I stood up a new exchange 2013 environment in my lab running on Server 2012. Everything looks like it should be working. All services running, no errors in the event log, I'm able to get into ECS. When I try and launch the ECP, it spins
for a little bit then I get a page can't be displayed. I've checked that exchange sees it:
I'm stumped. I've been scouring forums and can't pinpoint the issue. I know I could just blow my lab away and try to re-install from scratch but I'm so close to getting this stood up and don't want to just give up. Plus, I'm curious as
to what the cause is and how it's tied into Exchange functionality.
Also, when I try to browse to OWA, the page can't be displayed as well. I've tried to disable Enhanced IE security to no avail.
Any suggestions are appreciated.
Thanks.

Hi,
Please use the https://localhost/ecp URL to logon from the local CAS server and check if you can access EAC.
What's more, I have a test in my environment using Exchange 2013, when I use
https://exc2013cas.contoso.com/ecp to logon EAC, the same error occurs. But when I use
https://exc2013cas/ecp to logon, EAC works well. In your case, I recommend you use the
https://skunkms1/ecp URL to logon EAC and check the result.
Hope this can be helpful to you.
Best regards,
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Amy Wang
TechNet Community Support

ActiveSync is not working properly after migrating to new Exchange 2013 SP1 server?!

Few weeks ago we have added new Exchange 2013 SP1 onto our existing Exchange 2007 environment. I have migrated my mailbox to the new Ex2013 server. Everything (send/receive - internally/externally, OWA, OutlookAnywhere) for me and the existing Ex2007
users works fine. The only thing I have trouble with is the ActiveSync! After migrating to the new Ex2013 server my phone stops getting new emails…, existing Ex2007 users don’t have any problems with their mobile phones.
I did ActiveSync test for my user account with ActiveSync Tester and here is what I have:
As you can see from the error above ActiveSync Tester detects ActiveSync on Ex2013 server however something wrong there with form-based auth?! I can’t see any differences in settings for ActiveSync virtual folders in Ex2007 and Ex2013
virtual folders?!
What I’m missing here?! Please help.

Check if the Exchange Servers group does not have the appropriate permission to the mailbox object in Active Directory.
To check whether inheritance is disabled on the user:
1.Open Active Directory Users and Computers.
2.On the menu at the top of the console, click View > Advanced Features.
3.Locate and right-click the mailbox account in the console, and then click Properties.
4.Click the Security tab.
5.Click Advanced.
6.Make sure that the check box for "Include inheritable permissions from this object's parent" is selected.
Ref:
http://technet.microsoft.com/en-us/library/dd439375(v=exchg.80).aspx
Also check the Virtual directory authentication
Microsoft-Server-ActiveSync
•Basic authentication
•SSL required
•Requires 128-bit encryption
Ref:
http://technet.microsoft.com/en-us/library/gg247612(v=exchg.150).aspx
Check the IIS log if you are able to find any error message on it
Exchange Queries

Free busy information not working in new exchange site.

HI,
We have central site Exchange 2010 setup and it working fine . For business requirement we Installed new Exchange server(Mail/CAS/HUB) in new site.
Post installed, Auto discover and mail flow are working fine but Free/busy information is not working for new site mailbox users(Not working in outlook and OWA also).
I am having a strange error coming from outlook. When I run "Test E-mail AutoConfiguration" in Outlook, it comes up with Protocol: Exchange Http "wrong server name"
Please share your suggestion to change/configure "correct server name" in "Protocol: Exchange HTTP"
Protocol: Exchange HTTP
Server: wrong server name
Login name: testuser
SSL: Yes
Mutual Authentication: Yes
Note : ( Protocol: Exchange RPC show correct server information and other Urls (OOF, OAB, OWA, Availability server).)

Hi will martin,
Thanks for your reply..
Yes , I already pointed internal web service virtual directory ( "https://casarrayname/EWS/Exchan...) to CAS server in new site. Other internal URLs (OWA,ECP,OOF,Availability service) also pointed to
new site CAS server.
But , when i check Auto discover internal URI and URL. below is the result.
Result 1
[PS] C:\Windows\system32>Get-AutodiscoverVirtualDirectory -Server Servername
Name
Server InternalUrl
Autodiscover (Default Web Site)
Servername
Result 2
[PS] C:\Windows\system32>Get-ClientAccessServer -Identity servername |fl *internaluri*
AutoDiscoverServiceInternalUri : https://casarrayname/Autodiscover/Autodiscover.xml
When i tried to set interurl using the below command and it completed with no error but still InterURL not reflect.
command : Set-AutodiscoverVirtualDirectory -InternalURL https://casarrayname/Autodiscover/Autodiscover.xml

New Exchange Rate type settings

Hi gurus,
I have created a new exchange rate type for imports i.e. I and for exports i.e. E.
I have maintained translation ratios for exchange rate types.
I have maintained the exchange rates.
I have maintained exchange rate type in company code settings at tax on goods movement>India-> basic settings-->maintain company code settings.
After the above settings, while i am creating an import PO the exchange rate is not picking up from I.
Is there any other settings.

Dear,
It will pick from the EURX only. not from your code. For this we have OSS notes also. That's only for MM postings.
Regards,
Dharma Rao. Yekula.
Edited by: Dharma Rao. Yekula on May 8, 2009 9:02 AM

New Exchange 2013 CAS server in existing Exchange 2007 Organization

Dear Friends,
We have exchange 2007 SP3 with CU13 installed with single copy cluster for database and 1 OWA server for CAS/HT. We will migrate from current to Exchange 2013SP1. As we want to have HA, we have installed 2 new Exchange 2013 SP1 CAS server on widnows 2012
R2 after preparing our organisation for Exchange 2013. The setup went smooth without any error and successfully installed CAS with management tools. After installation it ask to reboot the server which we did. Now after reboot, we are not able to run Exchange
Management Sell. It never connects to the new server. In our old 2007 EMS also doesn't list any exchange 2013 server. We are also not able to connect to new CAS servers with below URL:
https://servername/ecp/?ExchClientVer=15
Its says site under maintenance. Please advise what to check. We were thinking of deploying CAS 1st and make it co-exist with Exchange 2007 before deploying Exchange 2013 mailbox server which will be setup in DAG. What are we doing wrong.
Thanks in advance!!

Dear Friends,
We have exchange 2007 SP3 with CU13 installed with single copy cluster for database and 1 OWA server for CAS/HT. We will migrate from current to Exchange 2013SP1. As we want to have HA, we have installed 2 new Exchange 2013 SP1 CAS server on widnows 2012
R2 after preparing our organisation for Exchange 2013. The setup went smooth without any error and successfully installed CAS with management tools. After installation it ask to reboot the server which we did. Now after reboot, we are not able to run Exchange
Management Sell. It never connects to the new server. In our old 2007 EMS also doesn't list any exchange 2013 server. We are also not able to connect to new CAS servers with below URL:
https://servername/ecp/?ExchClientVer=15
Its says site under maintenance. Please advise what to check. We were thinking of deploying CAS 1st and make it co-exist with Exchange 2007 before deploying Exchange 2013 mailbox server which will be setup in DAG. What are we doing wrong.
Thanks in advance!!
If you have only the 2013 CAS installed and not the mailbox role, then nothing will really work. Remember, in 2013, the mailbox role does all the work, the CAS is simply a proxy for the most part.
Twitter!: Please Note: My Posts are provided “AS IS” without warranty of any kind, either expressed or implied.

New exchange rate type instead of M

Hi,
I want to assign a new exchange rate type instead of M to my co code.
Where I can assign it to company code so that at the time of posting any document rate should be pickedup from new exchange rate type and not from M.
Thanks for reply

Hi,
Thanks for your answer.
I have two company code under one client.
One co code is for India and another for Dubai.
In India exchange rates changes every day but in Dubai it is fixed for long time.
As of now both co code are accessing same Rate under M
I want Indian Co Code take M exchange rate type while Dubai CoCode should take some other exchange rate type.
What could be solution then
Thank again

Speed Estimates

As per my other thread, the engineer is coming Thursday to activate me.
I ask, do the speed estimates on the BT site for Infinity tend to be low? i.e. do BT er on the side of caution so as not to give people unrealistic expectations?
If i put my no. in on the checker i get this...
...however many people ive been reading are actually getting quite a bit more than their estimates, sometimes 5/6/7 meg more.
Do BT lowball deliberately? What are your experiences?
I hope so as despite it saying 26.6 meg id love to break the 30 meg barrier

The way the 80/20 works is much like the upgrade from ADSL (8meg) to ADSL2+ (24meg). It utilises a wider band of frequencies to pass the data down essentially. Most people will see a speed increase unless you're REALLY far from the cabinet. The biggest benefit will be those closer to the cab but you should see some increase. The checker is being updated next week so wait and see I guess
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the the reply answers your question then please mark as ’Mark as Accepted Solution’

Restore Exchange DB after Recreation of mailboxes to New Exchange(low priority)

Hello to Everyone
Recently one client of mine had a problem with an exchange migration that he tried (2010 to 2013) and he needed to restore his old EDB from windows backup to restore 10 Mailboxes that he had already migrated. We run the whole procedure with eseutil,
ISINTEG etc. The problem was that the client had already deleted the mailboxes and the AD Users and recreated them on a new database. When I tried to export or move the mailboxes the Power Shell reported unknown error and as I understood tried
to Read from active directory GUID and couldn't find the same and Stopping.
We solved the problem with the OST to PST files relied on the computers but I would like to hear from your experience if we had other Alternatives?
I could think only to restore Exchange and the domain controller on a VLAN so they have the same AD Objects and then Export all mailboxes to PSTs and then Re import them to the New Exchange Server.
Thank you
Alexios

Not sure the steps you took, however based upon your brief explanation it sounds as though you were able to restore and rollup the logs using eseutil, correct?
Did you then use the RDB process to mount this DB onto an Exchange 2010 Server?
Assuming the above is correct you should then be able to restore the mailbox from the source DB into a temporary user mailbox as outlined here
http://technet.microsoft.com/en-us/library/ee332351%28v=exchg.150%29.aspx
If the above doesn't work for you the other option would be to use a 3rd party tool like Lucid8's DigiScope
http://www.lucid8.com/product/digiscope.asp which would allow you to easily open the Offline 2010 EDB to see all the mailboxes and their contents. You can then easily export to PST or directly
recover/migrate data from the offline 2010 EDB into the 2013 Production Exchange Server
Search, Recover, & Extract Mailboxes, Folders, & Email Items from Offline Exchange Mailbox and Public Folder EDB's and Live Exchange Servers or Import/Migrate direct from Offline EDB to Any Production Exchange Server, even cross version i.e. 2003
--> 2007 --> 2010 --> 2013 with Lucid8's
DigiScope
1. Yes Troy that is correct. I soft repair the db but it was continuing to be in dirty state. So I hard repaired it and came to a clean state.
2. I then Created a recoveryDB and tried to move mailboxes to temp mailboxes or export mailboxes etc.
3. There was no luck with the above, the power-shell reported that the mailbox GUID has changed and don't match with the AD signature, I am thinking this is probably because the client has already recreated all the mailboxes to a new db with the same
usernames-mails. In the end and after one day of tries I recommended a third party tool that I tried and I have seen that finds all the data of the mailboxes or if we have the OST of the users to convert them to PST. They used the second suggestion with OST
and I restored everything.
I posted this problem for brainstorming and if anyone else had the same problem or might have an idea why this happened. :)
Thanks

Configure new exchange 2010 while old exchange 2003 running ?

Hello,
I'm in the process of deploying a new fresh installation of SBS 2011/Exchange 2010 server. Currently
I have SBS2003/Exchange 2003 running. I want to retired the server and replace with the new server. No migration. By doing that, I am setting up the new server SBS2011 name/domain/ip everything the same as the old server and will replace once all the configuration
is completed.
1. Since they both using the same domainname/ip, can I setup the new server Exchange 2011 while the old
server is alive? If yes, how's the process?
2. If I export and import users email in .pst (on user outlook client) and when the new server is put in place alive does it will regenerate the database
in new Exchange 2011?
Thanks in advance =)

For the 1st question, both servers are in different/isolated network. So you were saying yes i can do that correct? will not going to have any issue running both servers having all the same configuration while configuring the new server up?
the 2nd. since i am not migrating, i am planing to export/import user email from outlook client and when i replace the old server with the new server, i setup the user email client and import the .pst back.

BT Inifinity Speed Estimate (New Exchange) - seems...

Similar Messages

Maybe you are looking for