BT Mighty Mouse Stopped Working ... and more!

I've gone through a lot of the posts on the topic and, while there are a lot of people with the same problem, I tried to do something in System Preferences and discovered a snag of sorts that I haven't seen mentioned.
Here's the background information:
1. I've been working with a Mighty Mouse since it came out and everything was fine.
2. Spilled orange juice on it and got a new one.
3. New one worked for about three weeks and then just stopped connecting.
4. I replaced the existing batteries (that were as old as the mouse)... nothing.
5. I started going through the posts and trying the different remedies (e.g., pulling out all USB and Firewires before rebooting, et al.)... nothing.
6. I paired the mouse with two other computers (both Intel) and it works.
Here's the part I haven't read about:
I just went to System Preferences, clicked on "Bluetooth," and my System Preferences got hung up (spinning ball) for about three or four minutes while the top of the window said "Loading Bluetooth...". Once in, all four checkboxes were checked. I clicked on the second tab "Devices" and it hung again. Same for the third "Sharing." To write this post, I just tried it again, and the same thing is happening.
I have a D-Link DBT-120 Nodule that I've been using for years. I can still connect to and transfer information to and from my phone with it.
Any ideas? Should I get a new nodule? Different brand of nodule? Thanks for any help anyone can offer.
Happy New Year!
Dual 2.3 GHz PowerPC G5   Mac OS X (10.4.8)   PowerBook G4, iMac Intel, Intel Mac Mini, iBook G3

For better tracking, ideally, you should always use a mousepad. A shiny clean table surface will not always give you the best performance...
Just in case you want to take it apart :
https://www.youtube.com/watch?v=3Su6JDxYqAM

Similar Messages

  • Corded Mighty Mouse Stops Working Sporadically

    Hey All,
    For some reason, my USB corded mighty mouse stop working when I stop moving it. The pointer remains on the screen, but it doesn't move around. The trackball & all the buttons still work, even when the pointer doesn't move. I don't understand why its doing this. It just started recently. Sometimes if I unplug the mouse and plug it back in, it will work again, but it won't work if I stop using it. The only way I can keep it working is keep the mouse constantly moving around. I'd appreciate any feedback that you guys have.
    Thanks

    There might be a short in the cord. The area where the cord goes into the mouse body is especially susceptible to this due to flexing back an forth. You can also inspect the cord for any visible damage. It is intermittent, because it depends on how the cord is bending at the time it happens.

  • Mighty Mouse stopped working, help!

    I have been using my corded Mighty Mouse since 2007 with no problems. I have encountered problems with the scroll ball getting clogged but have always been able to clean it. However recently the mouse just stopped working unless I put it on a textured surface. Prior to this it always worked without a mousepad right on my desk. I cleaned the mouse and desk so I don't think this is the problem. What could be the issue?

    For better tracking, ideally, you should always use a mousepad. A shiny clean table surface will not always give you the best performance...
    Just in case you want to take it apart :
    https://www.youtube.com/watch?v=3Su6JDxYqAM

  • Mighty Mouse stops working after a few hours on iMac G5

    Hello
    I got a mighty mouse and it worked perfectly for a while (so I know that I am clicking and using it properly)
    ...then it just started acting crazy..
    examples:
    -I'd have my hand over it(not touching it) and it would register a click
    -randomly registering clicking side-buttons
    -right-click just doesn't work
    So I took it back to apple store and got a replacement...no problem.
    I plugged in new one...worked fine for a while, then the same problem reappears.
    So I unhook the mighty mouse, plugin my MSFT optical mouse...then a few hours later, perhaps a reboot or two... I'll plugin my Mighty Mouse and again it will work fine. Then the whole problem repeats itself.
    I don't think the problem is with the mouse..but perhaps how it works on the iMac G5.
    Anyone seen anything like this? Its strange it happenned on TWO diff. Mighty Mouses.

    Rob
    I haven't gotten any help on it. I mean to call apple but haven't gotten to it. I will try turning off the side buttons when I get to the machine again, but as far as I'm concerned, for approx $50, this thing should work perfectly. I bought it because it has more buttons and turning them off isn't an option. APPLE, ARE YOU LISTENING.
    Please help us!
    Marc

  • Apple Wireless Mighty Mouse stopped working

    Any ideas on how to make it work?
    I have a regular wireless mouse which does work, but the mighty mouse doesn't. I've tried turning it off and on several times, replaced the batteries, cleaned the little ball, but nothing works.
    Thank you,
    Lee Anne

    Hi Lee-Anne-
    Does anything happen at all? Does the Mac see it in the Bluetooth setup?
    It may be time to invoke your warranty or AppleCare.
    Luck-
    -DaddyPaycheck

  • Bluetooth not working = wireless mighty mouse not working too

    I've received an apple wireless mighty mouse from my gf and it's not responding to anything. and my bluetooth icon in the top right of the screen says it's not enable everytime since. So it's surely in my imac the problem. Is there a way i can fix it buy myself or i have to send it to an apple store?
    N.B. i have the same problem as the rest of the peps who have the latest update of Leopard

    "can you tell my why it says that while 2 weeks ago my WIRELESS mighty mouse
    was working and that i was able to go into bluetooth icon and it was active???"
    http://docs.info.apple.com/article.html?artnum=86496 Apple Wireless Keyboard and Mouse: Troubleshooting Connection Issues
    If the above Article is of no help and DaddyPaycheck does not have any more solutions then I suggest that you cross-post over in the Bluetooth Keyboard/Mouse Forums where the Bluethooth users hang out.

  • USB optical mouse suddenly stop working and PCI Modem driver

    I have 2 Problems
    1 . Driver not found for the PCI Modem -
    2.  Optical mouse stops working suddenly -QLX Mouse
    i have reinstalled the XP before  reinstalling i had no problem with mouse it working fine
    PCI\VEN_8086&DEV_266D&SUBSYS_3080103C&REV_03\3&B1BFB68&0&F3
    The drivers for this device are not installed. (Code 28)
    Kindly sugest me the what to do

    Hello rajeevkumar30
    As I understand it you reinstalled Windows XP and now you have devices that are not being installed correctly? I would suggest that you visit the Compaq Presario V2000 CTO Notebook PC Drivers page and ensure that ALL your drivers and software are up to date. I would start with any BIOS and Firmware updates first than ensure your Drivers are up to date before moving on to your software.
    As these are the drivers designed for your system this should resolve your issue. Thank you for posting on the HP Forums. Have a great day! 
    Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
    Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
    Dunidar
    I work on behalf of HP
    Find out a bit more about me by checking out my profile!
    "Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

  • I have a problem with my PC mobile device that the keyboard stop working and the mouse also

    I have a problem with my PC mobile device that the keyboard stop working and the mouse also

    All I can suggeset is:
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    or
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    Have you looked at the AMDS topic of:
    iOS: Device not recognized in iTunes for Windows
    Do you have han image capture programs linstalled like for a camers or scanner?

  • My legally licensed CS6 has stopped working and reverted to trial mode.  I paid a bundle for this and don't care to pay more to keep the software I legally own.  There seems to be no customer support for this anymore, what do I do?

    My legally licensed CS6 has stopped working and reverted to trial mode.  I paid a bundle for this and don't care to pay more to keep the software I legally own.  There seems to be no customer support for this anymore, what do I do?
    The only answers I found were things like:
    Upgrade to CC or You're out of luck.
    This is not okay.
    Please Help!

    "Similar" problem here. I have bought a new PC, and want to install my precious CS5.5 to the new system.
    All I get is an "illegal serial number" message. Even though I deactivated on the old pc and even though I copy the serial (for the pc version) from my official products page (or whatever that page is called)...
    That's when the ordeal started to get someone at Adobe to figure out what is wrong.
    No voice support for my "old" version. 2011? Old? Come on?!
    The chat support is a Turin test, with no solution whatsoever.
    The websites linked to in the final "chat" lines which should answer my questions are utterly useless.
    So last attempt: I try overhere... and add my questions to you, OP...
    Note that the only way in which I can get a fast human reply is by calling the number for buying the new CC! Shame on you Adobe!

  • Starting problems, computer freezes, keyboard and mouse stop working

    Hi can anyone help? My powerbook has just stopped working, rarely starts, when it does keyboard and mouse stop working after a while or even before i am able to login. At one point I was getting a grey screen with the words, memory access invalid???? Please help...
    powerbook G4    

    power surge could have damaged something inside, or it maybe unrelated to the problem.
    PowerBook can get hot if there is some short circuit inside and power flow is disrupted, also it's possible that the fans are not working properly.
    as a guess, it is likely either hard drive or logic board problem.

  • Mouse stops working after being left alone

    My issue is: If I don't use my mouse for an extended period of time (especially if afk, happenes when at the computer too though) it stops working and I need to replug it for it to work, the time seems to range from 2 seconds to half an hour or more without any real logic to it.
    Expected behavior: the mouse should remain functional even after not being used for a variable amount of time.
    Originally I suspected it was because it uses 5V 100mA but after examining my previous mouse and the USB spec I can conclude that is not the case as this behavior was not expressed with my previous mouse, further this behavior remains even after I move it from the usb hub to one of the ports on the computer.
    A quick $lsusb later and I have the device id
    Bus 002 Device 085: ID 056a:00dd Wacom Co., Ltd Bamboo Pen (CTL-470)
    Bus 002 Device 048: ID 0d8c:013c C-Media Electronics, Inc. CM108 Audio Controller
    Bus 002 Device 047: ID 0421:026a Nokia Mobile Phones N97 (mass storage)
    Bus 002 Device 026: ID 05e3:0608 Genesys Logic, Inc. Hub
    Bus 002 Device 095: ID 1b1a:7004
    Bus 002 Device 092: ID 413c:2003 Dell Computer Corp. Keyboard
    Bus 002 Device 072: ID 05e3:0610 Genesys Logic, Inc. 4-port hub
    Bus 002 Device 071: ID 05e3:0610 Genesys Logic, Inc. 4-port hub
    Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
    Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
    Bus 001 Device 005: ID 04f2:b1d6 Chicony Electronics Co., Ltd CNF9055 Toshiba Webcam
    Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
    Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
    1b1a:7004 seems to be an unknown device (seeing that it works fine on windows and mac based computers I can conclude that the hardware isn't faulty)
    Perhaps linux doesn't realize it requires 100mA? Or maybe it isn't getting 12MB/s speed but instead only 1.5?
    Very well, #udevadm can tell me this.
    looking at parent device '/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1.1/2-1.1.1.2':
    KERNELS=="2-1.1.1.2"
    SUBSYSTEMS=="usb"
    DRIVERS=="usb"
    ATTRS{bDeviceSubClass}=="00"
    ATTRS{bDeviceProtocol}=="00"
    ATTRS{devpath}=="1.1.1.2"
    ATTRS{idVendor}=="1b1a"
    ATTRS{speed}=="12"
    ATTRS{bNumInterfaces}==" 1"
    ATTRS{bConfigurationValue}=="1"
    ATTRS{bMaxPacketSize0}=="8"
    ATTRS{busnum}=="2"
    ATTRS{devnum}=="95"
    ATTRS{configuration}==""
    ATTRS{bMaxPower}=="100mA"
    ATTRS{authorized}=="1"
    ATTRS{bmAttributes}=="a0"
    ATTRS{bNumConfigurations}=="1"
    ATTRS{maxchild}=="0"
    ATTRS{bcdDevice}=="0110"
    ATTRS{avoid_reset_quirk}=="0"
    ATTRS{quirks}=="0x0"
    ATTRS{version}==" 1.10"
    ATTRS{urbnum}=="11120"
    ATTRS{ltm_capable}=="no"
    ATTRS{manufacturer}==" USB Mouse "
    ATTRS{removable}=="fixed"
    ATTRS{idProduct}=="7004"
    ATTRS{bDeviceClass}=="00"
    ATTRS{product}==" USB Mouse "
    Well... apparently my theories are all incorrect, the LEDs stop pulsing when the mouse 'dies' and just remain on so at least I can conclude it doesn't power down.
    Any assistance would be greatly appreciated.

    $ sudo echo -1 >/sys/module/usbcore/parameters/autosuspend
    bash: /sys/module/usbcore/parameters/autosuspend: Permission denied
    ditto for $sudo for i in /sys/bus/usb/devices/*/power/autosuspend; do echo -1 > $i; done
    #for i in /sys/bus/usb/devices/*/power/autosuspend; do echo -1 > $i; done
    does execute without error but it changes nothing.
    the buttons do not wake the mouse which is why this is such a problem (well, the dpi button and LMB, RMB and MMB don't, there are two other buttons but I can't recall if I tested them)
    Physically unplugging and re-inserting the mouse and keyboard fixes the problem regardless of any changes. The thing is that I would like it to be working from boot, and not having to replug them.
    Obviously not working on my end though seeing I have to replug it every time it dies.
    thanks for linking the post though (I had already read it but going through it a second time at least proves it wasn't just a one off that I didn't do it right or something but that it actually doesn't work. Odd that root doesn't have permission to do some things though, seeing that root should have ultimate power).

  • Randomly jumpy mighty mouse (bt) pointer and trackpad too (once only)

    Gents,
    I have recently noted that, sometimes (randomly and rarely for the time being), the pointer of my bluetooth MM (Mighty Mouse) moves farther than what I was expecting it to move. This happened probably in concomitance with the opening of some application, as Iphoto. In other words, it appeared to me that the pointer accelerated more than what I demanded it to move with the displacement of the mouse. It was not really a jump but almost one, like a transitory, but contained, loss of pointer control.
    I believe that a similar event occurred also once with the trackpad pointer when I went to the bottom of the screen to make dock appear in concomitance with a skype call launch....the pointer seemed to move fast to the right although I am quite sure it was not my finger to command this motion on the pad.
    I have tried (with respect to MM) to delete and recreate the bluetooth .plist but it did not prevent from having this occurrence (note also that the batteries are OK).
    I have read in some other forum that this might be due to OSX pointer acceleration (not perfect) management, but I would like to be comforted by any similar feedback / experience of yours.
    Thanks
    Cheers

    I had a similar problem. I would move my mouse across the screen but randomly it would "catch" or "get stuck" very briefly throughout its movement. Like something was holding it back. I tried replacing mousepads, deleting the Bluetooh connection and re-pairing, deleting preference files...nothing. I even tried buying two new mice but they all had the same problem.
    I headed to an Apple Store and a Genius reproduced the problem. He had not heard of this before but it was clearly reproducible in front of his eyes. And sure enough, my Mighty Mouse was working fine on other Macs. So they set up repair job to replace my Bluetooth chipset (which is integrated into the display so they had to replace the display). A day later I picked it up and it works perfectly!
    I suggest going to an Apple Store and getting your Bluetooth chip replaced!

  • ITunes has stopped working and has to close message on Win 7

    When I plug my phone into the computer iTunes starts to open and then I get an error message that states iTunes has stopped working and has to close.  This seems to only happen while at work and not at home

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
    The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
    Your library should be unaffected by these steps but there also links to backup and recovery advice should it be needed.
    tt2

  • A few seconds after start the GDM mouse stops working

    After today's update I have the following problem: a few seconds after start the GDM mouse stops working. XDM doesn't work.
    Edited: Mouse works. Only pointer does not move.
    lscpi says:
    00:02.0 VGA compatible controller: Intel Corporation 82946GZ/GL Integrated Graphics Controller (rev 02)
    gdm says:
    usb 2-2: new low speed USB device using uhci_hcd and address 4
    input: USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/input/input6
    generic-usb 0003:04B3:310C.0003: input,hidraw1: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:1d.0-2/input0
    [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung
    [drm:i915_do_wait_request] *ERROR* i915_do_wait_request returns -11 (awaiting 1071 at 650, next 1076)
    (this line is repeated several times:)
    [drm:i915_do_wait_request] *ERROR* something (likely vbetool) disabled interrupts, re-enabling
    [drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung
    [drm:i915_do_wait_request] *ERROR* i915_do_wait_request returns -11 (awaiting 1079 at 650, next 1080)
    [drm:i915_reset] *ERROR* GPU hanging too fast, declaring wedged!
    [drm:i915_reset] *ERROR* Failed to reset chip.
    /var/log/Xorg.0.log says:
    [ 23.129]
    This is a pre-release version of the X server from The X.Org Foundation.
    It is not supported in any way.
    Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
    Select the "xorg" product for bugs you find in this release.
    Before reporting bugs in pre-release versions please check the
    latest version in the X.Org Foundation git repository.
    See http://wiki.x.org/wiki/GitPage for git access instructions.
    [ 23.129]
    X.Org X Server 1.9.3.901 (1.9.4 RC 1)
    Release Date: 2011-01-07
    [ 23.129] X Protocol Version 11, Revision 0
    [ 23.129] Build Operating System: Linux 2.6.36-ARCH i686
    [ 23.129] Current Operating System: Linux mariuszch 2.6.37-ARCH #1 SMP PREEMPT Sat Jan 29 19:40:04 UTC 2011 i686
    [ 23.129] Kernel command line: root=/dev/disk/by-uuid/3e82e71b-7de4-406d-8da9-8101fe4a713f ro i915.modeset=1
    [ 23.129] Build Date: 08 January 2011 11:27:31PM
    [ 23.129]
    [ 23.130] Current version of pixman: 0.20.2
    [ 23.130] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 23.130] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 23.131] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Jan 31 09:24:08 2011
    [ 23.163] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 23.206] (==) No Layout section. Using the first Screen section.
    [ 23.206] (==) No screen section available. Using defaults.
    [ 23.206] (**) |-->Screen "Default Screen Section" (0)
    [ 23.206] (**) | |-->Monitor "<default monitor>"
    [ 23.206] (==) No monitor specified for screen "Default Screen Section".
    Using a default monitor configuration.
    [ 23.206] (==) Automatically adding devices
    [ 23.206] (==) Automatically enabling devices
    [ 23.260] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    [ 23.260] Entry deleted from font path.
    [ 23.295] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/Type1/,
    /usr/share/fonts/100dpi/,
    /usr/share/fonts/75dpi/
    [ 23.295] (==) ModulePath set to "/usr/lib/xorg/modules"
    [ 23.295] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
    [ 23.295] (II) Loader magic: 0x81f3160
    [ 23.295] (II) Module ABI versions:
    [ 23.295] X.Org ANSI C Emulation: 0.4
    [ 23.295] X.Org Video Driver: 8.0
    [ 23.295] X.Org XInput driver : 11.0
    [ 23.295] X.Org Server Extension : 4.0
    [ 23.296] (--) PCI:*(0:0:2:0) 8086:2972:17aa:1015 rev 2, Mem @ 0xd0000000/1048576, 0xc0000000/268435456, I/O @ 0x000018c0/8
    [ 23.296] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    [ 23.296] (II) LoadModule: "extmod"
    [ 23.306] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
    [ 23.314] (II) Module extmod: vendor="X.Org Foundation"
    [ 23.314] compiled for 1.9.3.901, module version = 1.0.0
    [ 23.314] Module class: X.Org Server Extension
    [ 23.314] ABI class: X.Org Server Extension, version 4.0
    [ 23.314] (II) Loading extension MIT-SCREEN-SAVER
    [ 23.314] (II) Loading extension XFree86-VidModeExtension
    [ 23.314] (II) Loading extension XFree86-DGA
    [ 23.314] (II) Loading extension DPMS
    [ 23.314] (II) Loading extension XVideo
    [ 23.314] (II) Loading extension XVideo-MotionCompensation
    [ 23.314] (II) Loading extension X-Resource
    [ 23.314] (II) LoadModule: "dbe"
    [ 23.314] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
    [ 23.320] (II) Module dbe: vendor="X.Org Foundation"
    [ 23.320] compiled for 1.9.3.901, module version = 1.0.0
    [ 23.320] Module class: X.Org Server Extension
    [ 23.320] ABI class: X.Org Server Extension, version 4.0
    [ 23.320] (II) Loading extension DOUBLE-BUFFER
    [ 23.320] (II) LoadModule: "glx"
    [ 23.320] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 23.337] (II) Module glx: vendor="X.Org Foundation"
    [ 23.337] compiled for 1.9.3.901, module version = 1.0.0
    [ 23.337] ABI class: X.Org Server Extension, version 4.0
    [ 23.337] (==) AIGLX enabled
    [ 23.337] (II) Loading extension GLX
    [ 23.337] (II) LoadModule: "record"
    [ 23.338] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
    [ 23.338] (II) Module record: vendor="X.Org Foundation"
    [ 23.338] compiled for 1.9.3.901, module version = 1.13.0
    [ 23.338] Module class: X.Org Server Extension
    [ 23.338] ABI class: X.Org Server Extension, version 4.0
    [ 23.339] (II) Loading extension RECORD
    [ 23.339] (II) LoadModule: "dri"
    [ 23.339] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
    [ 23.347] (II) Module dri: vendor="X.Org Foundation"
    [ 23.347] compiled for 1.9.3.901, module version = 1.0.0
    [ 23.347] ABI class: X.Org Server Extension, version 4.0
    [ 23.347] (II) Loading extension XFree86-DRI
    [ 23.347] (II) LoadModule: "dri2"
    [ 23.348] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
    [ 23.351] (II) Module dri2: vendor="X.Org Foundation"
    [ 23.351] compiled for 1.9.3.901, module version = 1.2.0
    [ 23.351] ABI class: X.Org Server Extension, version 4.0
    [ 23.351] (II) Loading extension DRI2
    [ 23.351] (==) Matched intel as autoconfigured driver 0
    [ 23.351] (==) Matched vesa as autoconfigured driver 1
    [ 23.351] (==) Matched fbdev as autoconfigured driver 2
    [ 23.351] (==) Assigned the driver to the xf86ConfigLayout
    [ 23.351] (II) LoadModule: "intel"
    [ 23.352] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
    [ 23.408] (II) Module intel: vendor="X.Org Foundation"
    [ 23.408] compiled for 1.9.3, module version = 2.14.0
    [ 23.408] Module class: X.Org Video Driver
    [ 23.408] ABI class: X.Org Video Driver, version 8.0
    [ 23.408] (II) LoadModule: "vesa"
    [ 23.408] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
    [ 23.414] (II) Module vesa: vendor="X.Org Foundation"
    [ 23.414] compiled for 1.9.0, module version = 2.3.0
    [ 23.414] Module class: X.Org Video Driver
    [ 23.414] ABI class: X.Org Video Driver, version 8.0
    [ 23.414] (II) LoadModule: "fbdev"
    [ 23.425] (WW) Warning, couldn't open module fbdev
    [ 23.425] (II) UnloadModule: "fbdev"
    [ 23.425] (EE) Failed to load module "fbdev" (module does not exist, 0)
    [ 23.426] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
    i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
    E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
    965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
    4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
    Sandybridge, Sandybridge, Sandybridge, Sandybridge, Sandybridge,
    Sandybridge, Sandybridge
    [ 23.426] (II) VESA: driver for VESA chipsets: vesa
    [ 23.426] (++) using VT number 7
    [ 23.435] (WW) Falling back to old probe method for vesa
    [ 23.435] drmOpenDevice: node name is /dev/dri/card0
    [ 23.435] drmOpenDevice: open result is 8, (OK)
    [ 23.435] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
    [ 23.435] drmOpenDevice: node name is /dev/dri/card0
    [ 23.435] drmOpenDevice: open result is 8, (OK)
    [ 23.435] drmOpenByBusid: drmOpenMinor returns 8
    [ 23.435] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
    [ 23.435] (II) intel(0): Creating default Display subsection in Screen section
    "Default Screen Section" for depth/fbbpp 24/32
    [ 23.435] (==) intel(0): Depth 24, (--) framebuffer bpp 32
    [ 23.435] (==) intel(0): RGB weight 888
    [ 23.435] (==) intel(0): Default visual is TrueColor
    [ 23.436] (II) intel(0): Integrated Graphics Chipset: Intel(R) 946GZ
    [ 23.436] (--) intel(0): Chipset: "946GZ"
    [ 23.436] (**) intel(0): Tiling enabled
    [ 23.436] (**) intel(0): SwapBuffers wait enabled
    [ 23.436] (==) intel(0): video overlay key set to 0x101fe
    [ 23.520] (II) intel(0): Output VGA1 has no monitor section
    [ 23.587] (II) intel(0): EDID for output VGA1
    [ 23.587] (II) intel(0): Manufacturer: SAM Model: 594 Serial#: 1297691186
    [ 23.587] (II) intel(0): Year: 2010 Week: 1
    [ 23.587] (II) intel(0): EDID Version: 1.3
    [ 23.587] (II) intel(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V
    [ 23.587] (II) intel(0): Sync: Separate Composite SyncOnGreen
    [ 23.587] (II) intel(0): Max Image Size [cm]: horiz.: 44 vert.: 30
    [ 23.587] (II) intel(0): Gamma: 2.20
    [ 23.587] (II) intel(0): DPMS capabilities: Off; RGB/Color Display
    [ 23.587] (II) intel(0): First detailed timing is preferred mode
    [ 23.587] (II) intel(0): redX: 0.646 redY: 0.339 greenX: 0.290 greenY: 0.603
    [ 23.587] (II) intel(0): blueX: 0.145 blueY: 0.070 whiteX: 0.312 whiteY: 0.329
    [ 23.587] (II) intel(0): Supported established timings:
    [ 23.587] (II) intel(0): 720x400@70Hz
    [ 23.587] (II) intel(0): 640x480@60Hz
    [ 23.587] (II) intel(0): 640x480@67Hz
    [ 23.587] (II) intel(0): 640x480@72Hz
    [ 23.587] (II) intel(0): 640x480@75Hz
    [ 23.587] (II) intel(0): 800x600@56Hz
    [ 23.587] (II) intel(0): 800x600@60Hz
    [ 23.587] (II) intel(0): 800x600@72Hz
    [ 23.587] (II) intel(0): 800x600@75Hz
    [ 23.587] (II) intel(0): 832x624@75Hz
    [ 23.587] (II) intel(0): 1024x768@60Hz
    [ 23.587] (II) intel(0): 1024x768@70Hz
    [ 23.587] (II) intel(0): 1024x768@75Hz
    [ 23.587] (II) intel(0): 1280x1024@75Hz
    [ 23.587] (II) intel(0): 1152x864@75Hz
    [ 23.587] (II) intel(0): Manufacturer's mask: 0
    [ 23.587] (II) intel(0): Supported standard timings:
    [ 23.587] (II) intel(0): #0: hsize: 1680 vsize 1050 refresh: 60 vid: 179
    [ 23.587] (II) intel(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
    [ 23.587] (II) intel(0): #2: hsize: 1280 vsize 960 refresh: 60 vid: 16513
    [ 23.587] (II) intel(0): #3: hsize: 1152 vsize 864 refresh: 75 vid: 20337
    [ 23.587] (II) intel(0): #4: hsize: 1280 vsize 800 refresh: 60 vid: 129
    [ 23.587] (II) intel(0): #5: hsize: 1440 vsize 900 refresh: 60 vid: 149
    [ 23.587] (II) intel(0): #6: hsize: 1440 vsize 900 refresh: 75 vid: 3989
    [ 23.588] (II) intel(0): Supported detailed timing:
    [ 23.588] (II) intel(0): clock: 119.0 MHz Image Size: 459 x 296 mm
    [ 23.588] (II) intel(0): h_active: 1680 h_sync: 1728 h_sync_end 1760 h_blank_end 1840 h_border: 0
    [ 23.588] (II) intel(0): v_active: 1050 v_sync: 1053 v_sync_end 1059 v_blanking: 1080 v_border: 0
    [ 23.588] (II) intel(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 81 kHz, PixClock max 145 MHz
    [ 23.588] (II) intel(0): Monitor name: SyncMaster
    [ 23.588] (II) intel(0): Serial No: HMFZ102588
    [ 23.588] (II) intel(0): EDID (in hex):
    [ 23.588] (II) intel(0): 00ffffffffffff004c2d94053232594d
    [ 23.588] (II) intel(0): 011401030e2c1e782ab501a5564a9a25
    [ 23.588] (II) intel(0): 125054bfef80b30081808140714f8100
    [ 23.588] (II) intel(0): 9500950f01017c2e90a0601a1e403020
    [ 23.588] (II) intel(0): 3600cb281100001a000000fd00384b1e
    [ 23.588] (II) intel(0): 510e000a202020202020000000fc0053
    [ 23.588] (II) intel(0): 796e634d61737465720a2020000000ff
    [ 23.588] (II) intel(0): 00484d465a3130323538380a20200026
    [ 23.588] (II) intel(0): EDID vendor "SAM", prod id 1428
    [ 23.613] (II) intel(0): Using EDID range info for horizontal sync
    [ 23.613] (II) intel(0): Using EDID range info for vertical refresh
    [ 23.613] (II) intel(0): Printing DDC gathered Modelines:
    [ 23.613] (II) intel(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
    [ 23.613] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
    [ 23.613] (II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
    [ 23.613] (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
    [ 23.613] (II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
    [ 23.613] (II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
    [ 23.613] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
    [ 23.613] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
    [ 23.613] (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
    [ 23.613] (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
    [ 23.613] (II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
    [ 23.613] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
    [ 23.613] (II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
    [ 23.613] (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
    [ 23.613] (II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
    [ 23.613] (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
    [ 23.613] (II) intel(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
    [ 23.613] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
    [ 23.613] (II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
    [ 23.613] (II) intel(0): Modeline "1280x800"x0.0 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz)
    [ 23.613] (II) intel(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz)
    [ 23.613] (II) intel(0): Modeline "1440x900"x0.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz)
    [ 23.614] (II) intel(0): Printing probed modes for output VGA1
    [ 23.614] (II) intel(0): Modeline "1680x1050"x59.9 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
    [ 23.614] (II) intel(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
    [ 23.614] (II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
    [ 23.614] (II) intel(0): Modeline "1440x900"x75.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz)
    [ 23.614] (II) intel(0): Modeline "1440x900"x59.9 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz)
    [ 23.614] (II) intel(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
    [ 23.614] (II) intel(0): Modeline "1280x800"x59.8 83.50 1280 1352 1480 1680 800 803 809 831 +hsync -vsync (49.7 kHz)
    [ 23.614] (II) intel(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
    [ 23.614] (II) intel(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz)
    [ 23.614] (II) intel(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
    [ 23.614] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
    [ 23.614] (II) intel(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
    [ 23.614] (II) intel(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
    [ 23.614] (II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
    [ 23.614] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
    [ 23.614] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
    [ 23.614] (II) intel(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz)
    [ 23.614] (II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
    [ 23.614] (II) intel(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
    [ 23.614] (II) intel(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
    [ 23.614] (II) intel(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
    [ 23.614] (II) intel(0): Output VGA1 connected
    [ 23.614] (II) intel(0): Using exact sizes for initial modes
    [ 23.614] (II) intel(0): Output VGA1 using initial mode 1680x1050
    [ 23.614] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
    [ 23.614] (II) intel(0): Kernel page flipping support detected, enabling
    [ 23.614] (**) intel(0): Display dimensions: (440, 300) mm
    [ 23.614] (**) intel(0): DPI set to (96, 88)
    [ 23.614] (II) Loading sub module "fb"
    [ 23.614] (II) LoadModule: "fb"
    [ 23.615] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 23.628] (II) Module fb: vendor="X.Org Foundation"
    [ 23.629] compiled for 1.9.3.901, module version = 1.0.0
    [ 23.629] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 23.629] (II) UnloadModule: "vesa"
    [ 23.629] (II) Unloading /usr/lib/xorg/modules/drivers/vesa_drv.so
    [ 23.629] (==) Depth 24 pixmap format is 32 bpp
    [ 23.629] (==) intel(0): VideoRam: 262144 KB
    [ 23.629] (II) intel(0): [DRI2] Setup complete
    [ 23.629] (II) intel(0): [DRI2] DRI driver: i915
    [ 23.629] (II) intel(0): Allocated new frame buffer 1728x1050 stride 7168, tiled
    [ 23.656] (II) UXA(0): Driver registered support for the following operations:
    [ 23.656] (II) solid
    [ 23.656] (II) copy
    [ 23.656] (II) composite (RENDER acceleration)
    [ 23.656] (II) put_image
    [ 23.656] (II) get_image
    [ 23.656] (==) intel(0): Backing store disabled
    [ 23.656] (==) intel(0): Silken mouse enabled
    [ 23.658] (II) intel(0): Initializing HW Cursor
    [ 23.673] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
    [ 23.673] (==) intel(0): DPMS enabled
    [ 23.673] (==) intel(0): Intel XvMC decoder disabled
    [ 23.673] (II) intel(0): Set up textured video
    [ 23.673] (II) intel(0): Set up overlay video
    [ 23.673] (II) intel(0): direct rendering: DRI2 Enabled
    [ 23.673] (==) intel(0): hotplug detection: "enabled"
    [ 23.674] (--) RandR disabled
    [ 23.674] (II) Initializing built-in extension Generic Event Extension
    [ 23.674] (II) Initializing built-in extension SHAPE
    [ 23.674] (II) Initializing built-in extension MIT-SHM
    [ 23.674] (II) Initializing built-in extension XInputExtension
    [ 23.674] (II) Initializing built-in extension XTEST
    [ 23.674] (II) Initializing built-in extension BIG-REQUESTS
    [ 23.674] (II) Initializing built-in extension SYNC
    [ 23.674] (II) Initializing built-in extension XKEYBOARD
    [ 23.674] (II) Initializing built-in extension XC-MISC
    [ 23.674] (II) Initializing built-in extension SECURITY
    [ 23.674] (II) Initializing built-in extension XINERAMA
    [ 23.674] (II) Initializing built-in extension XFIXES
    [ 23.674] (II) Initializing built-in extension RENDER
    [ 23.674] (II) Initializing built-in extension RANDR
    [ 23.674] (II) Initializing built-in extension COMPOSITE
    [ 23.674] (II) Initializing built-in extension DAMAGE
    [ 23.754] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
    [ 23.754] (II) AIGLX: enabled GLX_INTEL_swap_event
    [ 23.754] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
    [ 23.754] (II) AIGLX: enabled GLX_SGI_make_current_read
    [ 23.754] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
    [ 23.754] (II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/i915_dri.so
    [ 23.754] (II) GLX: Initialized DRI2 GL provider for screen 0
    [ 23.755] (II) intel(0): Setting screen physical size to 444 x 277
    [ 24.316] (II) config/udev: Adding input device Power Button (/dev/input/event1)
    [ 24.316] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 24.316] (II) LoadModule: "evdev"
    [ 24.317] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 24.334] (II) Module evdev: vendor="X.Org Foundation"
    [ 24.334] compiled for 1.9.0, module version = 2.5.0
    [ 24.334] Module class: X.Org XInput Driver
    [ 24.334] ABI class: X.Org XInput driver, version 11.0
    [ 24.334] (**) Power Button: always reports core events
    [ 24.334] (**) Power Button: Device: "/dev/input/event1"
    [ 24.340] (--) Power Button: Found keys
    [ 24.340] (II) Power Button: Configuring as keyboard
    [ 24.340] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
    [ 24.340] (**) Option "xkb_rules" "evdev"
    [ 24.340] (**) Option "xkb_model" "evdev"
    [ 24.340] (**) Option "xkb_layout" "us"
    [ 24.380] (II) config/udev: Adding input device Power Button (/dev/input/event0)
    [ 24.380] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 24.380] (**) Power Button: always reports core events
    [ 24.380] (**) Power Button: Device: "/dev/input/event0"
    [ 24.386] (--) Power Button: Found keys
    [ 24.386] (II) Power Button: Configuring as keyboard
    [ 24.386] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
    [ 24.386] (**) Option "xkb_rules" "evdev"
    [ 24.386] (**) Option "xkb_model" "evdev"
    [ 24.386] (**) Option "xkb_layout" "us"
    [ 24.394] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event3)
    [ 24.394] (II) No input driver/identifier specified (ignoring)
    [ 24.398] (II) config/udev: Adding input device CHICONY USB NetVista Full Width Keyboard (/dev/input/event4)
    [ 24.398] (**) CHICONY USB NetVista Full Width Keyboard: Applying InputClass "evdev keyboard catchall"
    [ 24.398] (**) CHICONY USB NetVista Full Width Keyboard: always reports core events
    [ 24.398] (**) CHICONY USB NetVista Full Width Keyboard: Device: "/dev/input/event4"
    [ 24.403] (--) CHICONY USB NetVista Full Width Keyboard: Found keys
    [ 24.403] (II) CHICONY USB NetVista Full Width Keyboard: Configuring as keyboard
    [ 24.403] (II) XINPUT: Adding extended input device "CHICONY USB NetVista Full Width Keyboard" (type: KEYBOARD)
    [ 24.403] (**) Option "xkb_rules" "evdev"
    [ 24.403] (**) Option "xkb_model" "evdev"
    [ 24.403] (**) Option "xkb_layout" "us"
    [ 24.411] (II) config/udev: Adding input device PC Speaker (/dev/input/event2)
    [ 24.411] (II) No input driver/identifier specified (ignoring)
    [ 27.181] (II) intel(0): EDID vendor "SAM", prod id 1428
    [ 27.182] (II) intel(0): Using hsync ranges from config file
    [ 27.182] (II) intel(0): Using vrefresh ranges from config file
    [ 27.182] (II) intel(0): Printing DDC gathered Modelines:
    [ 27.182] (II) intel(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
    [ 27.182] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
    [ 27.182] (II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
    [ 27.182] (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
    [ 27.182] (II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
    [ 27.182] (II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
    [ 27.182] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
    [ 27.182] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
    [ 27.182] (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
    [ 27.182] (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
    [ 27.182] (II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
    [ 27.182] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
    [ 27.182] (II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
    [ 27.182] (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
    [ 27.182] (II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
    [ 27.182] (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
    [ 27.182] (II) intel(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
    [ 27.182] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
    [ 27.182] (II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
    [ 27.182] (II) intel(0): Modeline "1280x800"x0.0 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz)
    [ 27.182] (II) intel(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz)
    [ 27.182] (II) intel(0): Modeline "1440x900"x0.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz)
    [ 27.256] (II) intel(0): EDID vendor "SAM", prod id 1428
    [ 27.256] (II) intel(0): Using hsync ranges from config file
    [ 27.256] (II) intel(0): Using vrefresh ranges from config file
    [ 27.256] (II) intel(0): Printing DDC gathered Modelines:
    [ 27.256] (II) intel(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
    [ 27.256] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
    [ 27.256] (II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
    [ 27.256] (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
    [ 27.256] (II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
    [ 27.256] (II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
    [ 27.256] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
    [ 27.256] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
    [ 27.256] (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
    [ 27.256] (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
    [ 27.256] (II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
    [ 27.256] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
    [ 27.256] (II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
    [ 27.256] (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
    [ 27.256] (II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
    [ 27.256] (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
    [ 27.256] (II) intel(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
    [ 27.256] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
    [ 27.256] (II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
    [ 27.256] (II) intel(0): Modeline "1280x800"x0.0 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz)
    [ 27.256] (II) intel(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz)
    [ 27.256] (II) intel(0): Modeline "1440x900"x0.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz)
    [ 27.363] (II) intel(0): EDID vendor "SAM", prod id 1428
    [ 27.363] (II) intel(0): Using hsync ranges from config file
    [ 27.364] (II) intel(0): Using vrefresh ranges from config file
    [ 27.364] (II) intel(0): Printing DDC gathered Modelines:
    [ 27.364] (II) intel(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
    [ 27.364] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
    [ 27.364] (II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
    [ 27.364] (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
    [ 27.364] (II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
    [ 27.364] (II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
    [ 27.364] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
    [ 27.364] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
    [ 27.364] (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
    [ 27.364] (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
    [ 27.364] (II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
    [ 27.364] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
    [ 27.364] (II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
    [ 27.364] (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
    [ 27.364] (II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
    [ 27.364] (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
    [ 27.364] (II) intel(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
    [ 27.364] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
    [ 27.364] (II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
    [ 27.364] (II) intel(0): Modeline "1280x800"x0.0 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz)
    [ 27.364] (II) intel(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz)
    [ 27.364] (II) intel(0): Modeline "1440x900"x0.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz)
    [ 27.433] (II) intel(0): EDID vendor "SAM", prod id 1428
    [ 27.433] (II) intel(0): Using hsync ranges from config file
    [ 27.433] (II) intel(0): Using vrefresh ranges from config file
    [ 27.433] (II) intel(0): Printing DDC gathered Modelines:
    [ 27.433] (II) intel(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
    [ 27.434] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
    [ 27.434] (II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
    [ 27.434] (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
    [ 27.434] (II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
    [ 27.434] (II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
    [ 27.434] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
    [ 27.434] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
    [ 27.434] (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
    [ 27.434] (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
    [ 27.434] (II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
    [ 27.434] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
    [ 27.434] (II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
    [ 27.434] (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
    [ 27.434] (II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
    [ 27.434] (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
    [ 27.434] (II) intel(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
    [ 27.434] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
    [ 27.434] (II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
    [ 27.434] (II) intel(0): Modeline "1280x800"x0.0 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz)
    [ 27.434] (II) intel(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz)
    [ 27.434] (II) intel(0): Modeline "1440x900"x0.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz)
    [ 33.144] (EE) intel(0): Detected a hung GPU, disabling acceleration.
    [ 33.145] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [ 33.146] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [ 33.162] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [ 33.162] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [ 33.166] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [ 33.166] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [ 33.284] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [ 33.287] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [ 33.294] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [ 33.402] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [ 33.402] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [ 33.723] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [ 33.724] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [ 33.725] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [ 33.725] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [ 33.732] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [ 34.493] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [ 34.893] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [ 35.695] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [ 36.096] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [ 36.896] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [ 37.298] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [ 38.948] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [ 38.949] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [ 39.057] (EE) intel(0): failed to set cursor: Input/output error
    [ 39.057] (EE) intel(0): failed to set cursor: Input/output error
    [ 39.064] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [ 39.064] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [ 39.255] (EE) intel(0): failed to set cursor: Input/output error
    [ 39.255] (EE) intel(0): failed to set cursor: Input/output error
    [ 39.329] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [ 39.337] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [ 39.341] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [ 42.522] (EE) intel(0): failed to set cursor: Input/output error
    [ 42.522] (EE) intel(0): failed to set cursor: Input/output error
    [ 42.531] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
    [ 42.695] (EE) intel(0): failed to set cursor: Input/output error
    [ 42.695] (EE) intel(0): failed to set cursor: Input/output error
    [ 45.970] (EE) intel(0): failed to set cursor: Input/output error
    [ 45.970] (EE) intel(0): failed to set cursor: Input/output error
    [ 46.957] (EE) intel(0): failed to set cursor: Input/output error
    [ 46.957] (EE) intel(0): failed to set cursor: Input/output error
    [ 53.971] (EE) intel(0): failed to set cursor: Input/output error
    [ 53.971] (EE) intel(0): failed to set cursor: Input/output error
    [ 54.206] (EE) intel(0): failed to set cursor: Input/output error
    [ 54.206] (EE) intel(0): failed to set cursor: Input/output error
    [ 54.804] (EE) intel(0): failed to set cursor: Input/output error
    [ 54.804] (EE) intel(0): failed to set cursor: Input/output error
    [ 72.861] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/event5)
    [ 72.861] (**) USB Optical Mouse: Applying InputClass "evdev pointer catchall"
    [ 72.861] (**) USB Optical Mouse: always reports core events
    [ 72.861] (**) USB Optical Mouse: Device: "/dev/input/event5"
    [ 72.866] (--) USB Optical Mouse: Found 3 mouse buttons
    [ 72.866] (--) USB Optical Mouse: Found scroll wheel(s)
    [ 72.866] (--) USB Optical Mouse: Found relative axes
    [ 72.866] (--) USB Optical Mouse: Found x and y relative axes
    [ 72.866] (II) USB Optical Mouse: Configuring as mouse
    [ 72.866] (**) USB Optical Mouse: YAxisMapping: buttons 4 and 5
    [ 72.866] (**) USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 72.867] (II) XINPUT: Adding extended input device "USB Optical Mouse" (type: MOUSE)
    [ 72.867] (**) USB Optical Mouse: (accel) keeping acceleration scheme 1
    [ 72.867] (**) USB Optical Mouse: (accel) acceleration profile 0
    [ 72.867] (**) USB Optical Mouse: (accel) acceleration factor: 2.000
    [ 72.867] (**) USB Optical Mouse: (accel) acceleration threshold: 4
    [ 72.867] (II) USB Optical Mouse: initialized for relative axes.
    [ 72.868] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/mouse0)
    [ 72.868] (II) No input driver/identifier specified (ignoring)
    [ 84.484] (EE) intel(0): failed to set cursor: Input/output error
    [ 84.484] (EE) intel(0): failed to set cursor: Input/output error
    [ 136.555] (EE) intel(0): failed to set cursor: Input/output error
    [ 136.555] (EE) intel(0): failed to set cursor: Input/output error
    [ 163.561] (EE) intel(0): failed to set cursor: Input/output error
    [ 163.561] (EE) intel(0): failed to set cursor: Input/output error
    [ 176.751] (EE) intel(0): failed to set cursor: Input/output error
    [ 176.752] (EE) intel(0): failed to set cursor: Input/output error
    [ 179.565] (EE) intel(0): failed to set cursor: Input/output error
    [ 179.565] (EE) intel(0): failed to set cursor: Input/output error
    [ 179.613] (EE) intel(0): failed to set cursor: Input/output error
    [ 179.613] (EE) intel(0): failed to set cursor: Input/output error
    [ 190.939] (EE) intel(0): failed to set cursor: Input/output error
    [ 190.939] (EE) intel(0): failed to set cursor: Input/output error
    [ 196.719] (EE) intel(0): failed to set cursor: Input/output error
    [ 196.719] (EE) intel(0): failed to set cursor: Input/output error
    [ 197.007] (EE) intel(0): failed to set cursor: Input/output error
    [ 197.007] (EE) intel(0): failed to set cursor: Input/output error
    [ 200.991] (EE) intel(0): failed to set cursor: Input/output error
    [ 200.991] (EE) intel(0): failed to set cursor: Input/output error
    [ 202.499] (EE) intel(0): failed to set cursor: Input/output error
    [ 202.499] (EE) intel(0): failed to set cursor: Input/output error
    [ 203.164] (EE) intel(0): failed to set cursor: Input/output error
    [ 203.164] (EE) intel(0): failed to set cursor: Input/output error
    [ 207.322] (EE) intel(0): failed to set cursor: Input/output error
    [ 207.323] (EE) intel(0): failed to set cursor: Input/output error
    [ 208.093] (EE) intel(0): failed to set cursor: Input/output error
    [ 208.094] (EE) intel(0): failed to set cursor: Input/output error
    [ 209.080] (EE) intel(0): failed to set cursor: Input/output error
    [ 209.081] (EE) intel(0): failed to set cursor: Input/output error
    [ 209.641] (EE) intel(0): failed to set cursor: Input/output error
    [ 209.642] (EE) intel(0): failed to set cursor: Input/output error
    [ 214.392] (EE) intel(0): failed to set cursor: Input/output error
    [ 214.392] (EE) intel(0): failed to set cursor: Input/output error
    [ 214.885] (EE) intel(0): failed to set cursor: Input/output error
    [ 214.885] (EE) intel(0): failed to set cursor: Input/output error
    [ 225.899] (EE) intel(0): failed to set cursor: Input/output error
    [ 225.899] (EE) intel(0): failed to set cursor: Input/output error
    [ 225.912] (EE) intel(0): failed to set cursor: Input/output error
    [ 225.913] (EE) intel(0): failed to set cursor: Input/output error
    [ 244.351] (EE) intel(0): failed to set cursor: Input/output error
    [ 244.351] (EE) intel(0): failed to set cursor: Input/output error
    [ 245.332] (EE) intel(0): failed to set cursor: Input/output error
    [ 245.332] (EE) intel(0): failed to set cursor: Input/output error
    [ 248.711] (EE) intel(0): failed to set cursor: Input/output error
    [ 248.712] (EE) intel(0): failed to set cursor: Input/output error
    [ 249.347] (EE) intel(0): failed to set cursor: Input/output error
    [ 249.348] (EE) intel(0): failed to set cursor: Input/output error
    [ 252.594] (EE) intel(0): failed to set cursor: Input/output error
    [ 252.594] (EE) intel(0): failed to set cursor: Input/output error
    [ 253.062] (EE) intel(0): failed to set cursor: Input/output error
    [ 253.062] (EE) intel(0): failed to set cursor: Input/output error
    [ 273.635] (EE) intel(0): failed to set cursor: Input/output error
    [ 273.635] (EE) intel(0): failed to set cursor: Input/output error
    [ 274.148] (EE) intel(0): failed to set cursor: Input/output error
    [ 274.148] (EE) intel(0): failed to set cursor: Input/output error
    [ 285.208] (EE) intel(0): failed to set cursor: Input/output error
    [ 285.208] (EE) intel(0): failed to set cursor: Input/output error
    [ 287.473] (EE) intel(0): failed to set cursor: Input/output error
    [ 287.473] (EE) intel(0): failed to set cursor: Input/output error
    [ 353.216] (EE) intel(0): failed to set cursor: Input/output error
    [ 353.216] (EE) intel(0): failed to set cursor: Input/output error
    [ 355.928] (EE) intel(0): failed to set cursor: Input/output error
    [ 355.928] (EE) intel(0): failed to set cursor: Input/output error
    [ 357.845] (EE) intel(0): failed to set cursor: Input/output error
    [ 357.845] (EE) intel(0): failed to set cursor: Input/output error
    [ 360.465] (EE) intel(0): failed to set cursor: Input/output error
    [ 360.465] (EE) intel(0): failed to set cursor: Input/output error
    [ 361.916] (EE) intel(0): failed to set cursor: Input/output error
    [ 361.917] (EE) intel(0): failed to set cursor: Input/output error
    [ 363.505] (EE) intel(0): failed to set cursor: Input/output error
    [ 363.505] (EE) intel(0): failed to set cursor: Input/output error
    [ 364.433] (EE) intel(0): failed to set cursor: Input/output error
    [ 364.433] (EE) intel(0): failed to set cursor: Input/output error
    [ 366.375] (EE) intel(0): failed to set cursor: Input/output error
    [ 366.375] (EE) intel(0): failed to set cursor: Input/output error
    [ 367.953] (EE) intel(0): failed to set cursor: Input/output error
    [ 367.954] (EE) intel(0): failed to set cursor: Input/output error
    [ 369.092] (EE) intel(0): failed to set cursor: Input/output error
    [ 369.092] (EE) intel(0): failed to set cursor: Input/output error
    [ 372.906] (EE) intel(0): failed to set cursor: Input/output error
    [ 372.906] (EE) intel(0): failed to set cursor: Input/output error
    [ 374.450] (EE) intel(0): failed to set cursor: Input/output error
    [ 374.451] (EE) intel(0): failed to set cursor: Input/output error
    [ 376.802] (EE) intel(0): failed to set cursor: Input/output error
    [ 376.803] (EE) intel(0): failed to set cursor: Input/output error
    [ 378.140] (EE) intel(0): failed to set cursor: Input/output error
    [ 378.140] (EE) intel(0): failed to set cursor: Input/output error
    [ 382.347] (EE) intel(0): failed to set cursor: Input/output error
    [ 382.347] (EE) intel(0): failed to set cursor: Input/output error
    [ 383.812] (EE) intel(0): failed to set cursor: Input/output error
    [ 383.812] (EE) intel(0): failed to set cursor: Input/output error
    [ 386.612] (EE) intel(0): failed to set cursor: Input/output error
    [ 386.612] (EE) intel(0): failed to set cursor: Input/output error
    [ 388.092] (EE) intel(0): failed to set cursor: Input/output error
    [ 388.092] (EE) intel(0): failed to set cursor: Input/output error
    [ 389.436] (EE) intel(0): failed to set cursor: Input/output error
    [ 389.436] (EE) intel(0): failed to set cursor: Input/output error
    [ 391.131] (EE) intel(0): failed to set cursor: Input/output error
    [ 391.131] (EE) intel(0): failed to set cursor: Input/output error
    [ 392.372] (EE) intel(0): failed to set cursor: Input/output error
    [ 392.373] (EE) intel(0): failed to set cursor: Input/output error
    [ 393.630] (EE) intel(0): failed to set cursor: Input/output error
    [ 393.631] (EE) intel(0): failed to set cursor: Input/output error
    [ 394.932] (EE) intel(0): failed to set cursor: Input/output error
    [ 394.933] (EE) intel(0): failed to set cursor: Input/output error
    [ 396.629] (EE) intel(0): failed to set cursor: Input/output error
    [ 396.629] (EE) intel(0): failed to set cursor: Input/output error
    [ 398.349] (EE) intel(0): failed to set cursor: Input/output error
    [ 398.349] (EE) intel(0): failed to set cursor: Input/output error
    [ 400.264] (EE) intel(0): failed to set cursor: Input/output error
    [ 400.264] (EE) intel(0): failed to set cursor: Input/output error
    [ 402.517] (EE) intel(0): failed to set cursor: Input/output error
    [ 402.518] (EE) intel(0): failed to set cursor: Input/output error
    [ 404.749] (EE) intel(0): failed to set cursor: Input/output error
    [ 404.749] (EE) intel(0): failed to set cursor: Input/output error
    [ 407.798] (EE) intel(0): failed to set cursor: Input/output error
    [ 407.798] (EE) intel(0): failed to set cursor: Input/output error
    [ 411.170] (EE) intel(0): failed to set cursor: Input/output error
    [ 411.170] (EE) intel(0): failed to set cursor: Input/output error
    [ 411.910] (EE) intel(0): failed to set cursor: Input/output error
    [ 411.912] (EE) intel(0): failed to set cursor: Input/output error
    [ 413.276] (EE) intel(0): failed to set cursor: Input/output error
    [ 413.276] (EE) intel(0): failed to set cursor: Input/output error
    [ 414.775] (EE) intel(0): failed to set cursor: Input/output error
    [ 414.775] (EE) intel(0): failed to set cursor: Input/output error
    [ 416.762] (EE) intel(0): failed to set cursor: Input/output error
    [ 416.763] (EE) intel(0): failed to set cursor: Input/output error
    [ 420.439] (EE) intel(0): failed to set cursor: Input/output error
    [ 420.440] (EE) intel(0): failed to set cursor: Input/output error
    [ 424.614] (EE) intel(0): failed to set cursor: Input/output error
    [ 424.614] (EE) intel(0): failed to set cursor: Input/output error
    [ 426.920] (EE) intel(0): failed to set cursor: Input/output error
    [ 426.920] (EE) intel(0): failed to set cursor: Input/output error
    [ 430.033] (EE) intel(0): failed to set cursor: Input/output error
    [ 430.033] (EE) intel(0): failed to set cursor: Input/output error
    [ 432.265] (EE) intel(0): failed to set cursor: Input/output error
    [ 432.265] (EE) intel(0): failed to set cursor: Input/output error
    [ 435.339] (EE) intel(0): failed to set cursor: Input/output error
    [ 435.339] (EE) intel(0): failed to set cursor: Input/output error
    [ 437.705] (EE) intel(0): failed to set cursor: Input/output error
    [ 437.706] (EE) intel(0): failed to set cursor: Input/output error
    [ 441.112] (EE) intel(0): failed to set cursor: Input/output error
    [ 441.112] (EE) intel(0): failed to set cursor: Input/output error
    [ 444.922] (EE) intel(0): failed to set cursor: Input/output error
    [ 444.922] (EE) intel(0): failed to set cursor: Input/output error
    [ 448.296] (EE) intel(0): failed to set cursor: Input/output error
    [ 448.296] (EE) intel(0): failed to set cursor: Input/output error
    [ 450.299] (EE) intel(0): failed to set cursor: Input/output error
    [ 450.299] (EE) intel(0): failed to set cursor: Input/output error
    [ 453.190] (EE) intel(0): failed to set cursor: Input/output error
    [ 453.191] (EE) intel(0): failed to set cursor: Input/output error
    [ 455.467] (EE) intel(0): failed to set cursor: Input/output error
    [ 455.468] (EE) intel(0): failed to set cursor: Input/output error
    [ 458.751] (EE) intel(0): failed to set cursor: Input/output error
    [ 458.751] (EE) intel(0): failed to set cursor: Input/output error
    [ 460.132] (EE) intel(0): failed to set cursor: Input/output error
    [ 460.132] (EE) intel(0): failed to set cursor: Input/output error
    [ 462.768] (EE) intel(0): failed to set cursor: Input/output error
    [ 462.770] (EE) intel(0): failed to set cursor: Input/output error
    [ 464.061] (EE) intel(0): failed to set cursor: Input/output error
    [ 464.061] (EE) intel(0): failed to set cursor: Input/output error
    [ 467.064] (EE) intel(0): failed to set cursor: Input/output error
    [ 467.064] (EE) intel(0): failed to set cursor: Input/output error
    [ 469.637] (EE) intel(0): failed to set cursor: Input/output error
    [ 469.637] (EE) intel(0): failed to set cursor: Input/output error
    [ 472.446] (EE) intel(0): failed to set cursor: Input/output error
    [ 472.447] (EE) intel(0): failed to set cursor: Input/output error
    [ 475.654] (EE) intel(0): failed to set cursor: Input/output error
    [ 475.654] (EE) intel(0): failed to set cursor: Input/output error
    [ 477.849] (EE) intel(0): failed to set cursor: Input/output error
    [ 477.852] (EE) intel(0): failed to set cursor: Input/output error
    [ 481.102] (EE) intel(0): failed to set cursor: Input/output error
    [ 481.102] (EE) intel(0): failed to set cursor: Input/output error
    [ 483.658] (EE) intel(0): failed to set cursor: Input/output error
    [ 483.658] (EE) intel(0): failed to set cursor: Input/output error
    [ 486.239] (EE) intel(0): failed to set cursor: Input/output error
    [ 486.239] (EE) intel(0): failed to set cursor: Input/output error
    [ 489.082] (EE) intel(0): failed to set cursor: Input/output error
    [ 489.083] (EE) intel(0): failed to set cursor: Input/output error
    [ 491.279] (EE) intel(0): failed to set cursor: Input/output error
    [ 491.280] (EE) intel(0): failed to set cursor: Input/output error
    [ 494.315] (EE) intel(0): failed to set cursor: Input/output error
    [ 494.315] (EE) intel(0): failed to set cursor: Input/output error
    [ 495.905] (EE) intel(0): failed to set cursor: Input/output error
    [ 495.905] (EE) intel(0): failed to set cursor: Input/output error
    [ 498.171] (EE) intel(0): failed to set cursor: Input/output error
    [ 498.172] (EE) intel(0): failed to set cursor: Input/output error
    [ 499.312] (EE) intel(0): failed to set cursor: Input/output error
    [ 499.313] (EE) intel(0): failed to set cursor: Input/output error
    [ 501.813] (EE) intel(0): failed to set cursor: Input/output error
    [ 501.813] (EE) intel(0): failed to set cursor: Input/output error
    [ 502.817] (EE) intel(0): failed to set cursor: Input/output error
    [ 502.817] (EE) intel(0): failed to set cursor: Input/output error
    [ 507.125] (EE) intel(0): failed to set cursor: Input/output error
    [ 507.125] (EE) intel(0): failed to set cursor: Input/output error
    [ 508.209] (EE) intel(0): failed to set cursor: Input/output error
    [ 508.210] (EE) intel(0): failed to set cursor: Input/output error
    [ 540.521] (EE) intel(0): failed to set cursor: Input/output error
    [ 540.526] (EE) intel(0): failed to set cursor: Input/output error
    [ 541.621] (EE) intel(0): failed to set cursor: Input/output error
    [ 541.621] (EE) intel(0): failed to set cursor: Input/output error
    [ 552.597] (EE) intel(0): failed to set cursor: Input/output error
    [ 552.597] (EE) intel(0): failed to set cursor: Input/output error
    [ 553.470] (EE) intel(0): failed to set cursor: Input/output error
    [ 553.471] (EE) intel(0): failed to set cursor: Input/output error
    [ 554.186] (EE) intel(0): failed to set cursor: Input/output error
    [ 554.186] (EE) intel(0): failed to set cursor: Input/output error
    [ 555.103] (EE) intel(0): failed to set cursor: Input/output error
    [ 555.103] (EE) intel(0): failed to set cursor: Input/output error
    [ 690.143] (EE) intel(0): failed to set cursor: Input/output error
    [ 690.143] (EE) intel(0): failed to set cursor: Input/output error
    [ 690.263] (EE) intel(0): failed to set cursor: Input/output error
    [ 690.263] (EE) intel(0): failed to set cursor: Input/output error
    [ 690.333] (EE) intel(0): failed to set cursor: Input/output error
    [ 690.333] (EE) intel(0): failed to set cursor: Input/output error
    [ 690.557] (EE) intel(0): failed to set cursor: Input/output error
    [ 690.557] (EE) intel(0): failed to set cursor: Input/output error
    [ 690.591] (EE) intel(0): failed to set cursor: Input/output error
    [ 690.591] (EE) intel(0): failed to set cursor: Input/output error
    [ 690.606] (EE) intel(0): failed to set cursor: Input/output error
    [ 690.607] (EE) intel(0): failed to set cursor: Input/output error
    [ 691.055] (EE) intel(0): failed to set cursor: Input/output error
    [ 691.055] (EE) intel(0): failed to set cursor: Input/output error
    [ 691.070] (EE) intel(0): failed to set cursor: Input/output error
    [ 691.071] (EE) intel(0): failed to set cursor: Input/output error
    [ 755.300] (EE) intel(0): failed to set cursor: Input/output error
    [ 755.300] (EE) intel(0): failed to set cursor: Input/output error
    [ 755.444] (EE) intel(0): failed to set cursor: Input/output error
    [ 755.444] (EE) intel(0): failed to set cursor: Input/output error
    [ 765.910] (EE) intel(0): failed to set cursor: Input/output error
    [ 765.911] (EE) intel(0): failed to set cursor: Input/output error
    [ 769.826] (EE) intel(0): failed to set cursor: Input/output error
    [ 769.827] (EE) intel(0): failed to set cursor: Input/output error
    [ 771.279] (EE) intel(0): failed to set cursor: Input/output error
    [ 771.279] (EE) intel(0): failed to set cursor: Input/output error
    [ 776.475] (EE) intel(0): failed to set cursor: Input/output error
    [ 776.475] (EE) intel(0): failed to set cursor: Input/output error
    [ 777.584] (EE) intel(0): failed to set cursor: Input/output error
    [ 777.584] (EE) intel(0): failed to set cursor: Input/output error
    [ 782.163] (EE) intel(0): failed to set cursor: Input/output error
    [ 782.163] (EE) intel(0): failed to set cursor: Input/output error
    [ 784.345] (EE) intel(0): failed to set cursor: Input/output error
    [ 784.345] (EE) intel(0): failed to set cursor: Input/output error
    [ 789.813] (EE) intel(0): failed to set cursor: Input/output error
    [ 789.814] (EE) intel(0): failed to set cursor: Input/output error
    [ 793.986] (EE) intel(0): failed to set cursor: Input/output error
    [ 793.986] (EE) intel(0): failed to set cursor: Input/output error
    [ 796.717] (EE) intel(0): failed to set cursor: Input/output error
    [ 796.717] (EE) intel(0): failed to set cursor: Input/output error
    [ 802.971] (EE) intel(0): failed to set cursor: Input/output error
    [ 802.971] (EE) intel(0): failed to set cursor: Input/output error
    [ 805.567] (EE) intel(0): failed to set cursor: Input/output error
    [ 805.568] (EE) intel(0): failed to set cursor: Input/output error
    [ 807.811] (EE) intel(0): failed to set cursor: Input/output error
    [ 807.811] (EE) intel(0): failed to set cursor: Input/output error
    [ 814.410] (EE) intel(0): failed to set cursor: Input/output error
    [ 814.410] (EE) intel(0): failed to set cursor: Input/output error
    [ 815.460] (EE) intel(0): failed to set cursor: Input/output error
    [ 815.460] (EE) intel(0): failed to set cursor: Input/output error
    [ 818.800] (EE) intel(0): failed to set cursor: Input/output error
    [ 818.800] (EE) intel(0): failed to set cursor: Input/output error
    [ 821.589] (EE) intel(0): failed to set cursor: Input/output error
    [ 821.589] (EE) intel(0): failed to set cursor: Input/output error
    [ 825.657] (EE) intel(0): failed to set cursor: Input/output error
    [ 825.657] (EE) intel(0): failed to set cursor: Input/output error
    [ 828.078] (EE) intel(0): failed to set cursor: Input/output error
    [ 828.078] (EE) intel(0): failed to set cursor: Input/output error
    [ 831.833] (EE) intel(0): failed to set cursor: Input/output error
    [ 831.834] (EE) intel(0): failed to set cursor: Input/output error
    [ 833.806] (EE) intel(0): failed to set cursor: Input/output error
    [ 833.807] (EE) intel(0): failed to set cursor: Input/output error
    [ 835.978] (EE) intel(0): failed to set cursor: Input/output error
    [ 835.978] (EE) intel(0): failed to set cursor: Input/output error
    [ 840.143] (EE) intel(0): failed to set cursor: Input/output error
    [ 840.143] (EE) intel(0): failed to set cursor: Input/output error
    [ 854.335] (EE) intel(0): failed to set cursor: Input/output error
    [ 854.335] (EE) intel(0): failed to set cursor: Input/output error
    [ 855.471] (EE) intel(0): failed to set cursor: Input/output error
    [ 855.471] (EE) intel(0): failed to set cursor: Input/output error
    [ 867.428] (EE) intel(0): failed to set cursor: Input/output error
    [ 867.429] (EE) intel(0): failed to set cursor: Input/output error
    [ 870.354] (EE) intel(0): failed to set cursor: Input/output error
    [ 870.355] (EE) intel(0): failed to set cursor: Input/output error
    [ 873.062] (EE) intel(0): failed to set cursor: Input/output error
    [ 873.062] (EE) intel(0): failed to set cursor: Input/output error
    [ 873.955] (EE) intel(0): failed to set cursor: Input/output error
    [ 873.955] (EE) intel(0): failed to set cursor: Input/output error
    [ 877.131] (EE) intel(0): failed to set cursor: Input/output error
    [ 877.132] (EE) intel(0): failed to set cursor: Input/output error
    [ 878.020] (EE) intel(0): failed to set cursor: Input/output error
    [ 878.021] (EE) intel(0): failed to set cursor: Input/output error
    [ 880.499] (EE) intel(0): failed to set cursor: Input/output error
    [ 880.499] (EE) intel(0): failed to set cursor: Input/output error
    [ 881.708] (EE) intel(0): failed to set cursor: Input/output error
    [ 881.708] (EE) intel(0): failed to set cursor: Input/output error
    [ 884.711] (EE) intel(0): failed to set cursor: Input/output error
    [ 884.711] (EE) intel(0): failed to set cursor: Input/output error
    [ 893.533] (EE) intel(0): failed to set cursor: Input/output error
    [ 893.533] (EE) intel(0): failed to set cursor: Input/output error
    [ 896.537] (EE) intel(0): failed to set cursor: Input/output error
    [ 896.537] (EE) intel(0): failed to set cursor: Input/output error
    [ 898.029] (EE) intel(0): failed to set cursor: Input/output error
    [ 898.030] (EE) intel(0): failed to set cursor: Input/output error
    [ 901.447] (EE) intel(0): failed to set cursor: Input/output error
    [ 901.447] (EE) intel(0): failed to set cursor: Input/output error
    [ 902.670] (EE) intel(0): failed to set cursor: Input/output error
    [ 902.670] (EE) intel(0): failed to set cursor: Input/output error
    [ 907.266] (EE) intel(0): failed to set cursor: Input/output error
    [ 907.267] (EE) intel(0): failed to set cursor: Input/output error
    [ 908.415] (EE) intel(0): failed to set cursor: Input/output error
    [ 908.415] (EE) intel(0): failed to set cursor: Input/output error
    [ 911.083] (EE) intel(0): failed to set cursor: Input/output error
    [ 911.083] (EE) intel(0): failed to set cursor: Input/output error
    [ 912.335] (EE) intel(0): failed to set cursor: Input/output error
    [ 912.335] (EE) intel(0): failed to set cursor: Input/output error
    [ 914.699] (EE) intel(0): failed to set cursor: Input/output error
    [ 914.699] (EE) intel(0): failed to set cursor: Input/output error
    [ 915.519] (EE) intel(0): failed to set cursor: Input/output error
    [ 915.520] (EE) intel(0): failed to set cursor: Input/output error
    [ 921.179] (EE) intel(0): failed to set cursor: Input/output error
    [ 921.180] (EE) intel(0): failed to set cursor: Input/output error
    [ 923.296] (EE) intel(0): failed to set cursor: Input/output error
    [ 923.297] (EE) intel(0): failed to set cursor: Input/output error
    [ 926.020] (EE) intel(0): failed to set cursor: Input/output error
    [ 926.021] (EE) intel(0): failed to set cursor: Input/output error
    [ 926.881] (EE) intel(0): failed to set cursor: Input/output error
    [ 926.881] (EE) intel(0): failed to set cursor: Input/output error
    [ 930.252] (EE) intel(0): failed to set cursor: Input/output error
    [ 930.252] (EE) intel(0): failed to set cursor: Input/output error
    [ 931.105] (EE) intel(0): failed to set cursor: Input/output error
    [ 931.105] (EE) intel(0): failed to set cursor: Input/output error
    [ 938.375] (EE) intel(0): failed to set cursor: Input/output error
    [ 938.376] (EE) intel(0): failed to set cursor: Input/output error
    [ 951.395] (EE) intel(0): failed to set cursor: Input/output error
    [ 951.396] (EE) intel(0): failed to set cursor: Input/output error
    [ 997.695] (EE) intel(0): failed to set cursor: Input/output error
    [ 997.695] (EE) intel(0): failed to set cursor: Input/output error
    [ 1034.261] (EE) intel(0): failed to set cursor: Input/output error
    [ 1034.261] (EE) intel(0): failed to set cursor: Input/output error
    [ 1042.673] (EE) intel(0): failed to set cursor: Input/output error
    [ 1042.674] (EE) intel(0): failed to set cursor: Input/output error
    [ 1058.408] (EE) intel(0): failed to set cursor: Input/output error
    [ 1058.408] (EE) intel(0): failed to set cursor: Input/output error
    [ 1061.964] (EE) intel(0): failed to set cursor: Input/output error
    [ 1061.964] (EE) intel(0): failed to set cursor: Input/outpu

    I have installed the xf86-video-intel-newest from AUR, but with modified version - 2.13.0. Now mouse pointer works.

  • Everytime I try to launch the iTunes store I get a message that iTunes has stopped working and that windows is searchning for a solution to the problem, but nothing gets fixed

    everytime I try to launch the iTunes store I get a message that iTunes has stopped working and that windows is searchning for a solution to the problem, but nothing gets fixed

    Hello mcgivnma,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
    http://support.apple.com/kb/ts1717
    Best of luck,
    Mario

Maybe you are looking for