BT Netprotect PLus - Renew Licence Issue

Quod Core PC with Vista s/p2 64bit
BT BB with option 3
I have enjoyed BT Netprotect Plus for sometime and every now and again I get a stupid licence renew issue occur as do others. Well it has happened again but this time I have been unable to fix it. According to Microsoft's Windows Security Alert I have no McAfee Firewall or Antivirus installed or initiated. I can't even switch over to MS's firewall.
According to the BT BB FAQ's it is just a simple matter of right clicking on the "M" icon and selecting the renew licence. Except in my case the icon disappears after the desk top appears on boot up. The desktop icon fails to work as well and I've run short cut fixes and even selected the program from the list of programs all to no avail as the program fails to boot.
I have even tried to uninstall and reinstall BT Netprotect Plus but every time I do this I lose access to the internet. A yellow triangle appears stating "Local Access" only. To regain internet access again I have to invoke a restore going back 5 days.
When I boot up McAfee Security Plus it appears in red and tells me my PC is at risk and when I run the "fix" button it takes me to their pay and download web site which is rich considering I pay for these services in BB option 3.
I have looked up BT's FAQ page and have seen similar experiences and it is recommended to download McAfee's Virtual Technition which I have done and run a scan. No feedback received that there is a problem or indeed whether it was fixed and there is no change to my PC as I still can't renew the licence. Just to make this a little more annoying and weird I have two other PC's connected to my LAN. A laptop running windows 7 and an ancient beast running XP. Both have access to the internet and and there are no issues with updating BT Netprotect antivirus s/w. I have even used my laptop to invoke licence renewal on that PC thinking that would satisfy McAfee but I still can't fix the problem on my Vista PC. Please help. Incidentally I think it is bad customer service not to warn customer's of a licence renewal. It was bad enough when BT supplied Symantec A/V products. I'm on my Vista PC every day and auto updates for McAfee are set up. Look forward to the answer on this one. Please don't tell me to re-install Netprotect again. Regards Dave

Hi GHFM,
Have you tried this yet?
https://kc.mcafee.com/corporate/index?page=content&id=KB53512
Cheers,
Chris.
BT Mod Team.
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

Similar Messages

  • Netprotect Plus Download issue

    Can anyone from BT or other members please help?
    Since November 2011 I have been trying to download and install NetProtect Plus via the BT link. Every time I click the link for "BT BB Option 2" customer it fails to download stating the NetProtect Plus is only for BT BB Customers.
    I have been a BT BB customer for many years and have had Netprotect Plus previously. Only reason I am looking to download it again is because I have installed a new operating system on my machine, Windows 7.
    BT support have been no help whatsoever despite many many email's and phone calls. I am totally frustrated because the Family Protection that is a big reason why I have Bt BB I cannot utilise as I cant download.
    Solved!
    Go to Solution.

    What you guys don't want to do is use the internet without adequate protection. While you are sorting the Netprotect issue, try downloading Microsoft Security Essentials (MSE) for free and run it in conjunction with Windows firewall. Many people also recommend Malwarebytes Anti-Malware (MBAM) to run an occasional scan to supplement MSE.
    Once you've had these in place for a while, like me you'll probably wonder why you relied on McAfee in the first place. If you decide to give up on it completely, you should run this clean-up tool: http://service.mcafee.com/FAQDocument.aspx?id=TS100507.
    You can click the white star next to this message if you think it was helpful.

  • Installed BT NetProtect Plus on a PC Being Upgrade...

    I have a PC running one of my BT NetProtect Plus licences.  The PC is currently running Windows XP Pro SP3, but in the near future it's going to get wiped and replaced with Windows 7 Ultimate.  The hardware is all staying the same just the Windows version is changing.  Question is will it use the same licence as now or will it take another one?  Can you subsequently release unused licences?
    Chris.

    Hi ChristopherPovey and welcome
    Hmm, not too sure about this...
    but
    I doubt it will be able to use the same licence... (or we'd be able to copy the licence to multiple PC's)
    And I'd say it's best to uninstall it anyway, before the upgrade, to avoid any issues...
    Regarding the unused licence, we can install 7 seperate installs on 7 different PC's, each with a seperate licence.
    (unless you've already used up all 7).
    If you need advice on uninstalling, let me know
    -+-No longer a forum member-+-

  • Installed BT NetProtect Plus now I cannot access m...

    Hi,
    I thought I was doing the right thing by installing BT NetProtect plus on my Windows XP Pro PC however ever since I have had issues.  I can no longer browse my home network to access shared files - when I double-click my workgroup I get an error of 'MSHOME is not accessible, you may not have permission to use this network resource'.  I did not get this prior to the installation.   I tried initially just disabling the firewall - at least this allowed other PCs to browse the shares on my PC but it did not help on my PC. 
    I have now uninstalled NetProtect Plus but this has not resolved the issue.  It would seem that the software has changed some setting but not reset it when removed.
    I do have File and Printer sharing enabled on my PC
    I have enabled WINS
    I do have the Computer Browser Service running
    All of these were suggestions on the Internet.  Still no luck. 
    Please any other suggestions would be most welcome as I need to be able to access the network for my work.

    Some things that might be worth checking.
    The account/share password if any is still correct.
    The Log On  credentials for the appropriate System Services are still correct (cross check any details using your other PCs )
    The User/Admin Account you are using still has the proper credentials & access rights, particularly to the folders you have shared.
    "I have this awful feeling someone is watching every move I make (one of my pet hates is router location tagging)." Marvin (A paranoid Android)

  • BT NetProtect Plus Problems

    Just wondering if anyone has had problems with bt netprotect plus and found any solutions. I was a customer of McAfee for some years, I upgraded to BT Broadband Option 2 with bt netprotect plus provided by McAfee included, my original McAfee software was about to expire and I had followed the link to bt netprotect plus which appeared to download and install, during installation messages appeared telling me old files were being removed and updated, however, on the day my old McAfee expired a message appeared requesting payment to extend subscription, I contacted McAfee to inform them I was now with bt netprotect plus, I sign in under a different password to bt netprotect, however, it always defaults to my old account which is now expired with no software available, I contacted bt customer help, I was transferred to bt technical help who remotely took over 2 desktop computers in my home both have Window 7, the technician informed me bt netprotect plus was incompatible with windows 7, I did question so why are you installing software onto my computer which is incompatible, following the remote installation of bt netprotect plus, I tried to restart both computers to find I was unable to boot up both, the internal fans are running fast and loud, the DVD RW & DVD ROM drive light up, then that's it, the hardrive indicator light remain on, there is no signal to the pc monitor or any other devices (keyboard or mouse) I contacted bt for help, well they can't help me as I have nothing on my screen, I ask for help again today, it can't be the software, we're really sorry but can't offer any help, it is frustrating to have so much conflicting advice, customer service were helpful and understanding and gave me a number to contact bt technical help with the advice of asking for a supervisor, however, they are unable to offer any explanation as to why following remote access to my computers, and changing the system settings, I now have 2 computers that are now useless, the parting advice was to go to computer shop to have them repaired at my expense, the only computer working is my laptop, which was the first pc I was able to download bt netprotect plus to and is working okay, but I'm fearful that it will die to and I'll be left in the dark. I would be grateful if any other bt customers have had similar problems and found any solutions, I can't afford to right off hundreds of pounds worth of equipment, I wished I had never changed to option 2 and kept things as they were, I have never had any problems with BT, McAfee or my desktops prior to this incident.  Thanks

    Hi Stuart,
    Thanks for the e-mail. I am really sorry for the problems that you have had, quite a frustrating issue I fully appreciate.
    I can see that there is an open complaint on your account in which a team is actively dealing with this case. As far as I can see the last note on the complaint is that you have agreed to bring the PC in question to a Vendor to have it checked. Is that correct?
    I really don't think that this issue could have been caused by the action of the advisor who took remote access control of your PC. The actions the advisor took where all at software level but the problems that you describe indicate that the power was off on the PC and monitor when you returned. I am not aware of any changes anyone could make via your operating system that would cause you to lose power to the PC components.
    As I say there is a team already dealing with this issue so there is not much we can do in the mean time as too many departments dealing with this could prove very confusing. I would however be very interested to learn of the outcome of this case.. If there is anything else that I can help you with please drop me a reply.
    REPLY
    Thank you for your reply, both desktop PC's had power, but were unable to boot up with no signals to peripheral devices (monitor, keyboard, mouse) if the problem was purely software, I can't understand why BT technical help did not ask the customer to download from McAfee site software removal tool before attempting to install BT NetProtect Plus, especially if the customer had been a previous customer of McAfee, maybe wise after the event, on the day the technician took control of my desktops, it was evident that system files were being accessed and deleted and following this both computers failed to restart as unable to boot up. I asked a local computer technician to look at both PC's and one is now up and running again with BT NetProtect Plus installed and working, the other desktop continues to fail to boot up, however, the technician accessed the hardrive to allow me to rescue files.
    I have again spoke with BT technical help, I could accept if only one PC failed to boot, but both following intervention from BT technical help remote access is more than just coincidence, but I now understand, BT accepts no responsibility nor offers any solution, compensation for the loss of hundreds of pounds worth of equipment, a warning should be issued to customers that intervention made by BT technical help remote access may result in loss of functioning PC. The only advice available from BT is to continue presenting the non functioning destop to to a PC vendor for repair at my cost, like I said in previous e-mails I would rather replace the desktop as continual repair costs would exceed the cost of a replacement desktop and would resolve the problem at my cost and prevent any further frustration dealing with BT, happy to close the complaint now as unresolved.

  • BT NetProtect plus – Real time scanning and update...

    I have posted this message as both a pointer in case others have the same issue as well as whether anyone has found a proper resolution.
    I have recently experianced problems with my BT NetProtect plus indicating the Real time scanning has stopped and any attempt to restart it does not work. This is accompanied with it keep promptig that there is a new update and to restart the computer. This happened every time I logged on.
    I had spent some considerable time with the BT support people who have now reinstalled the software about 6 time's after the 2 time I had already tried.
    I run Windows 7 64 bit and recently installed an SSD drive. The key thing I have subsequently discovered in my upgrade is that I changed some registry settings to make my default installation location to be my D: drive. I followed this post :
    The 64bit version has two versions of regedit. Make this change as well:
    1.) Enter into Start>Run: %systemroot%\syswow64\regedit 2.) Go to: HKEY_LOCAL_MACHINE \ SOFTWARE \ Microsoft \ Windows \ CurrentVersion 3.) Change the Path in DWORDs ProgramFilesDir, ProgramFilesDir (x86) to the new path, probably just changing the drive letter
    Everything works fine apart from BT NetProtect plus which when installed new has the above issue.  If I change the default install location back to C: drive then it installs OK and works OK when I subsequently change the default install location back to the D: drive. When I say works OK, that is until BT NetProtect plus issues a major update when the same problem appears again.
    I am waiting further contact from the 3rd line helpdesk but the 2nd line team did not seam to know of this problem.
    Has anyone else experenced it or know of a proper solution ?

    A full McAfee scan on my desktop PC can take about 2 hours or so and a full scan sometimes slows down my over 3 year old desktop PC. Thats why I only do a full McAfee scan every once in a while but I do a quick McAfee scan every 6 or 7 days.
    I do like the McAfee shredder though and use that now and again. I also got McAfee quick clean set to run at lest twice a week.  
    I have used Norton in the past and that slowed down my last PC more than McAfee from BT. The free version of AVG is good but its only an anti-virus. Some say the windows firewall is ok but not the best.
    I also have windows defender set to do a quick scan every evening around 9pm. As most nights I have my Desktop PC on at that time.
    I also do a disk clean up at leat once a day.
    Darren

  • BT NetProtect Plus

    Apparently I am able to install BT NetProtect Plus on a maximum of 7 computers. I have only ever installed it on 3. But I had to reinstall Windows 7 on two of them and so therefore had to re-install BT NetProtect Plus. Now however when I log onto My Account for the anti virus product it says I have it active on 6 computers, which I don't because I only have 3.
    Anybody know what I'm talking about and know how I can stop it registering as 6 computers actively using it on the My Account part of the website for NetProtect Plus?
    Any help would be much appreciated. Thanks in advance!

    I had a similar issue when I used McAfee purchased direct, and their UK customer service line 02079490107 proved to be very helpful. I'm not sure whether they would be so obliging with a third-party product but it might be worth a try.
    (It's a pity the AV didn't match the customer service - I ditched it in favour of MSE with a year of my subscription left.)  
    You can click the white star next to this message if you think it was helpful.

  • Windows7 and BT Netprotect plus

    Hi de hi
    To cut a very long story short.....
    BTNP operating on XP PC detected a Trojan (Very rude adult theme) attempt from a source computer which tried to scan my PC but was blocked. Phew!
    Having concerns regarding my kids safety I updated the Microsoft Security Essentials which is/was installed on Laptop. Suprised to find that MSE updates are 8 hours behind us Brits
    Uninstalled MSE and restarted Laptop. Got the usual 'not protected warnings'.
    Installed BTNP using Firefox (NO add-ons!). Got the "!". Checked and BTNP advised that firewall not enabled and to click fix. Got a "one or more errors" and couldn't fix. Multiple attempts and still the same. Checked Windows firewall and it was still enabled. Switched it off and clicked fix. Still zip. Some time passed and after much head scratching uninstalled BTNP.
    Opened IE8 and tried with that. Bingo it only ruddy worked.
    Therefore can a mod please look into why Firefox had an issue as it shouldn't of.
    ps. You might want to update either of these
    Does BT Netprotect Plus work with Windows 7 = no - http://bt.custhelp.com/app/answers/detail/a_id/13238/related/1
    Will BT Netprotect Plus work with Windows 7 = yes - http://bt.custhelp.com/app/answers/detail/a_id/12868/related/1
    -+-No longer a forum member-+-

    Hi DS,
    I agree with you "does NP+ work with W7" not the only contradictory FAQ. I've tried NP+ on W7 x64 installed OK and with Firefox, notice the word tried NP+ appears to be a previous version of Macfee's IS suite I suppose what do you expect for free.

  • FAO Aarong/Webby - BT NetProtect Plus Firewall is ...

    Evening boys,
    It would appear the BT NetProtect Plus Firewall is causing my erratic speeds as I've just turned it off and am getting a constant 72mb on vmspeed.com and practically the same on bbmax.
    The moment I turn it back on, speeds are dropping by a good 15-20mb, back off again and straight back up to 72mb and the whole test is nice and consistent?????
    Why on earth would the BT NetProtect Plus Firewall be causing it?!  I'm 99.99% sure that this is the issue as if I solely disable the real time scanning, the erratic speeds persist but turning off the Firewall and Bob's your Uncle?!
    You won't get to ride the racehorse...until you've ridden the mule.... - RogerB 13/04/2010

    pauldavies1980 wrote:
    I'm using the BT Mcafee Netprotect Suite and was intrigued by this post so had to give it a go... Unfortunatly it makes no difference in the slightest on my machine with it disabled to when enabled, so can only assume Mcafee is doing something on your network to cause these fluctuation when doing speedtest.net.
    My setup is 1gb NIC connected to Cisco Catalyst 1gb/s Layer2 switch which is connected individually to the Openreach modem & HH3. I deceided to go against connecting the red port on the HH3 direct to the OR modem as I wanted to capture an analyse the packets data so I can get some metrics on speed/throughput etc.
    Sorry to hear that Paul but it is definitely the cause of mine?!  I'm taking regular tests with the Firewall on and off now and the only consistent results are with it off!?!  I have absolutely no idea what is causing this or why but I shall have to do some more digging....
    You won't get to ride the racehorse...until you've ridden the mule.... - RogerB 13/04/2010

  • BT Netprotect Plus stuck checking for updates

    Managed to get BT NetProtect Plus installed, but now it is stuck on 0% and saying checking for updates.
    Does anybody have any ideas on why or how to get it to update.
    I have tried other Antivirus software and they update ok.

    Hi Jimw,
    Thanks for the post and welcome to the forum.
    You can try an manually update Netprotect.  Please see this link How often is BT NetProtect Plus updated?
    Let me know if this problem continues.
    Cheers
    Sean
    BTCare Community Manager
    If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
    We are sorry that we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)

  • BT Netprotect Plus and Home Network.

    I have just upgraded to BT Infinity and BT Netprotect Plus. My old Desktop, with LAN, and my Netbook ,wireless, both run Windows XP and previously had Mcafee Internet Security on both. Prior to the 'upgrade' the home network was fine. Now in lets call it 'Mcafee', Home Networks, My Home Network, the Desktop sees the Netbook as having an 'old' version of Mcafee although it has been uploaded three times, the latest today. This stops me in my tracks trying to get the network working again. BT Help was no help, apart from, offering to charge me to sort out something which was no problem before. Any good ideas out there?
    Solved!
    Go to Solution.

    There's more here - an ageing thread but still applies.
    You can click the white star next to this message if you think it was helpful.

  • BT NetProtect Plus Firewall Setting Problem

    I have just downloaded the new BT NetProtect Plus.  In checking it out I find the Firewall settings for Attack Detection are all set to No.  These settings can be edited to yes but McAfee recommends that the No settings  are not changed.  Having also installed NetProtect on my laptop, I also find the settings are set to No.  On both computers the summary, with the big green tick, says my computers are secure and no action is required.  How can they be if the aforementioned No settings remain at No?  I tried McAfee for an answer but they wanted £28 for the privilege.  To my mind it's a BT problem as it has got their name on the tin - as I pay a monthly subscription BT should provide an answer.   BT India help did not know the reason for the No settings.  

    napper wrote:
    I have just downloaded the new BT NetProtect Plus.  In checking it out I find the Firewall settings for Attack Detection are all set to No.  These settings can be edited to yes but McAfee recommends that the No settings  are not changed.  Having also installed NetProtect on my laptop, I also find the settings are set to No.  On both computers the summary, with the big green tick, says my computers are secure and no action is required.  How can they be if the aforementioned No settings remain at No?  I tried McAfee for an answer but they wanted £28 for the privilege.  To my mind it's a BT problem as it has got their name on the tin - as I pay a monthly subscription BT should provide an answer.   BT India help did not know the reason for the No settings.  
    Couple of links here;
    http://download.mcafee.com/products/webhelp/4/2057/GUID-BF945446-A022-4C09-96BD-FD0DB7A80CEB.html
    https://community.mcafee.com/thread/26401

  • BT NetProtect Plus no option to install

    I'm trying to get BT NetProtect Plus on my PC.  I'm a customer with unlimited usage.  However when I go to install it there is no option to download as it say 'Sorry you need to be a customer' then a note to say that I should check my broadband order!
    I'm logged in on the main account but apparently I'm still not a customer?
    Please can you resolve asap.
    Thanks.

    pandd wrote:
    Are you going to this page to install http://www.productsandservices.bt.com/consumerProducts
    Please explain "Microsoft Security Essentials" and why I can't get BT NetProtect Plus even as a BT customer.
    If you are logging into bt.com and it still says you are not a broadband customer, then if you are a new customer, your account may not have been set up yet.
    Have you contacted BT Broadband Help, to see what they say?
    If you still cannot get anywhere, they you could try Live Chat here
    http://bt.custhelp.com/app/contact/c/2902/?s_intcid=con_intban_sanda_contact_us_chat_from_forums
    Or the BT Care team forum moderators here
    http://bt.custhelp.com/app/contact_email/c/4951
    If you have a Windows PC, then Microsoft Security Essentials is provided free at this address
    http://windows.microsoft.com/en-GB/windows/products/security-essentials
    You can only have one piece of anti virus software installed on your computer.
    There are some useful help pages here, for BT Broadband customers only, on my personal website.
    BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

  • BT Netprotect Plus - Where are stored passwords on...

    I have just upgraded my McAfee BT Netprotect Plus software.
    The previous version of this software had a password vault (which was accessed through the advanced option under the Internet options).  This was a secure way of keeping a list of all user names and passwords - which gets ever longer! The feature was extremely useful, and reassuring that it was unlikely anyone else would see it, avoiding the need for less secure means of recording this information.
    I cannot see any way in which this list can now be accessed through the upgraded software and I fear this vital list may have been lost...
    Help!!

    They are stored in '''key3.db''' and '''signons.sqlite'''.
    Both of these files are located in your [http://support.mozilla.com/en-US/kb/Profiles#How_to_find_your_profile profile folder].

  • BT Netprotect plus home network problem

    I am having real problems with my home network when Netprotect plus is installed, which BT have been unable to resolve.
    My network consists of two PCs running XP with service pack 3, a Netgear NAS drive, a laptop with Vista and a home hub 2.
    All computers have file sharing set up correctly, no computer names are duplicated, all have the same network name set etc.  All devices show up on the network but I cannot read or open files on the different PCs and the laptop. The only device that I can open files on is the NAS drive - which clearly does not have NetProtect plus on; the NAS drive cannot however access my PCs for backing up purposes.
    We have tried everything; permitted IPs are all set up correctly but even switching off the firewalls in NetProtect plus makes no difference, nor does removing and reinstalling NetProtect plus.  If I remove Netprotect plus from a particular PC then other devices on the network can access that PC perfectly normally - indicating that the problem lies with NetProtect plus.
    The only solution would seem to be to move to another antivirus/netprotect programme.  But if anyone has any other ideas that would be much appreciated.
    Ian

    A postscript:
    In the end I gave up on Netprotect plus and installed Kaspersky on the main PC, leaving Netprotect plus on the rest of the network. Kaspersky works perfectly. The other machines on the network can read and copy files from the machine running Kaspersky, which is what I needed. The reverse operation does not work, ie I cannot open and read files on the machines running Netprotect, but this does not cause me any problems. Incidentally, BT support were unable to sort out the problem!!

Maybe you are looking for